Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Uni-directional Description Bi-directional The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u u u u u u u u u u u u u u u u u u u For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical IR less than 5μA above 12V. High Temperature soldering: 260°C/40 seconds at terminals Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT Plastic package has Underwriters Laboratory Flammability 94V-0 Matte tin lead–free Plated Halogen free and RoHS compliant Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) Functional Diagram Bi-directional Cathode Anode Uni-direction Agency Approvals AGENCY AGENCY FILE NUMBER E341027 Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) PPPM 3000 Watts Amps Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) IPP See Next Table PM(AV) 6.0 Watt Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 Amps Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) VF 3.5/5.0 Voltage TJ , TSTG -55 to +150 °C Power Dissipation on Infinite Heat Sink at TL=75°C Operating junction and Storage Temperature Range. Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 1/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number Uni SMDJ5.0 SMDJ5.0A SMDJ6.0 SMDJ6.0A SMDJ6.5 SMDJ6.5A SMDJ7.0 SMDJ7.0A SMDJ7.5 SMDJ7.5A SMDJ8.0 SMDJ8.0A SMDJ8.5 SMDJ8.5A SMDJ9.0 SMDJ9.0A SMDJ10 SMDJ10A SMDJ11 SMDJ11A SMDJ12 SMDJ12A SMDJ13 SMDJ13A SMDJ14 SMDJ14A SMDJ15 SMDJ15A SMDJ16 SMDJ16A SMDJ17 SMDJ17A SMDJ18 SMDJ18A SMDJ19 SMDJ19A SMDJ20 SMDJ20A SMDJ22 SMDJ22A SMDJ24 SMDJ24A SMDJ26 SMDJ26A SMDJ28 SMDJ28A SMDJ30 SMDJ30A SMDJ33 SMDJ33A SMDJ36 SMDJ36A SMDJ40 SMDJ40A SMDJ43 SMDJ43A Bi SMDJ5.0C SMDJ5.0CA SMDJ6.0C SMDJ6.0CA SMDJ6.5C SMDJ6.5CA SMDJ7.0C SMDJ7.0CA SMDJ7.5C SMDJ7.5CA SMDJ8.0C SMDJ8.0CA SMDJ8.5C SMDJ8.5CA SMDJ9.0C SMDJ9.0CA SMDJ10C SMDJ10CA SMDJ11C SMDJ11CA SMDJ12C SMDJ12CA SMDJ13C SMDJ13CA SMDJ14C SMDJ14CA SMDJ15C SMDJ15CA SMDJ16C SMDJ16CA SMDJ17C SMDJ17CA SMDJ18C SMDJ18CA SMDJ19C SMDJ19CA SMDJ20C SMDJ20CA SMDJ22C SMDJ22CA SMDJ24C SMDJ24CA SMDJ26C SMDJ26CA SMDJ28C SMDJ28CA SMDJ30C SMDJ30CA SMDJ33C SMDJ33CA SMDJ36C SMDJ36CA SMDJ40C SMDJ40CA SMDJ43C SMDJ43CA Marking Uni RDD RDE RDF RDG RDH RDK RDL PDM PDN PDP PDQ PDR PDS PDT PDU PDV PDW PDX PDY PDZ PED PEE PEF PEG PEH PEK PEL PEM PEN PEP PEQ PER PES PET PEA PEB PEU PEV PEW PEX PEY PEZ PFD PFE PFF PFG PFH PFK PFL PFM PFN PFP PFQ PFR PFS PFT Bi DDD DDE DDF DDG DDH DDK DDL DDM DDN DDP DDQ DDR DDS DDT DDU DDV DDW DDX DDY DDZ DED DEE DEF DEG DEH DEK DEL DEM DEN DEP DEQ DER DES DET DEA DEB DEU DEV DEW DEX DEY DEZ DFD DFE DFF DFG DFH DFK DFL DFM DFN DFP DFQ DFR DFS DFT Reverse Stand-Off Voltage VRWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 19.0 19.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 Breakdown Voltage VBR (V) @IT MIN 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.00 10.00 11.10 11.10 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 21.13 21.10 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 33.30 36.70 36.70 40.00 40.00 44.40 44.40 47.80 47.80 SOCAY Electronics Co., Ltd. Revision September 25, 2013 MAX 7.30 7.37 7.00 7.37 8.15 7.37 8.82 7.98 9.51 8.60 10.20 9.21 10.90 9.83 11.50 10.40 12.20 11.10 13.60 12.30 14.90 13.50 16.30 14.70 17.60 15.90 19.10 17.20 20.40 18.50 21.80 19.70 23.10 20.90 24.40 22.10 25.76 23.30 27.10 24.50 29.80 26.90 32.60 29.50 35.30 31.90 38.00 34.40 40.70 36.80 44.90 40.60 48.90 44.20 54.30 49.10 58.40 52.80 Test Current IT (mA) 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @IPP (V) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 34.0 30.8 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 Maximum Peak Pulse Current IPP (A) 312.50 326.09 263.16 291.26 243.90 267.86 225.56 250.00 209.79 232.56 200.00 220.59 188.68 208.33 177.51 194.81 159.57 176.47 149.25 164.84 136.36 150.75 126.05 139.53 116.28 129.31 111.52 122.95 104.17 115.38 98.36 108.70 93.17 102.74 88.21 97.47 83.80 92.59 76.14 84.51 69.77 77.12 64.38 71.26 60.00 66.08 56.07 61.98 50.85 56.29 46.66 51.64 42.02 46.51 39.11 43.23 Maximum Reverse Leakage IR @VRWM (μA) 1000 1000 1000 1000 500 500 200 200 100 100 50 50 25 25 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 www.socay.com 2/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V Electrical Characteristics (TA=25℃ unless otherwise noted) (Continue) Part Number Uni SMDJ45 SMDJ45A SMDJ48 SMDJ48A SMDJ51 SMDJ51A SMDJ54 SMDJ54A SMDJ58 SMDJ58A SMDJ60 SMDJ60A SMDJ64 SMDJ64A SMDJ70 SMDJ70A SMDJ75 SMDJ75A SMDJ78 SMDJ78A SMDJ80 SMDJ80A SMDJ85 SMDJ85A SMDJ90 SMDJ90A SMDJ100 SMDJ100A SMDJ110 SMDJ110A SMDJ120 SMDJ120A SMDJ130 SMDJ130A SMDJ140 SMDJ140A SMDJ150 SMDJ150A SMDJ160 SMDJ160A SMDJ170 SMDJ170A SMDJ180 SMDJ180A SMDJ190 SMDJ190A SMDJ200A SMDJ220A SMDJ250A SMDJ300A SMDJ350A SMDJ400A SMDJ440A Note: Bi SMDJ45C SMDJ45CA SMDJ48C SMDJ48CA SMDJ51C SMDJ51CA SMDJ54C SMDJ54CA SMDJ58C SMDJ58CA SMDJ60C SMDJ60CA SMDJ64C SMDJ64CA SMDJ70C SMDJ70CA SMDJ75C SMDJ75CA SMDJ78C SMDJ78CA SMDJ80C SMDJ80CA SMDJ85C SMDJ85CA SMDJ90C SMDJ90CA SMDJ100C SMDJ100CA SMDJ110C SMDJ110CA SMDJ120C SMDJ120CA SMDJ130C SMDJ130CA SMDJ140C SMDJ140CA SMDJ150C SMDJ150CA SMDJ160C SMDJ160CA SMDJ170C SMDJ170CA SMDJ180C SMDJ180CA SMDJ190C SMDJ190CA SMDJ200CA SMDJ220CA SMDJ250CA SMDJ300CA SMDJ350CA SMDJ400CA SMDJ440CA 3000W Marking Uni PFU PFV PFW PFX PFY PFZ RGD RGE RGF PGG RGH PGK PGL PGM PGN PGP PGQ PGR PGS PGT PGA PGB PGU PGV PGW PGX PGY PGZ PHD PHE PHF PHG PHH PHK PHA PHB PHL PHM PHN PHP PHQ PHR PHS PHT PHU PHV PHW PHX PHZ PJE PJG PJK PJM Bi DFU DFV DFW DFX DFY DFZ DGD DGE DGF DGG DGH DGK DGL DGM DGN DGP DGQ DGR DGS DGT DGA DGB DGU DGV DGW DGX DGY DGZ DHD DHE DHF DHG DHH DHK DHA DHB DHL DHM DHN DHP DHQ DHR DHS DHT DHU DHV DHW DHX DHZ DJE DJG DJK DJM Reverse Stand-Off Voltage VRWM (V) 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 60.0 60.0 64.0 64.0 70.0 70.0 75.0 75.0 78.0 78.0 80.0 80.0 85.0 85.0 90.0 90.0 100.0 100.0 110.0 110.0 120.0 120.0 130.0 130.0 140.0 140.0 150.0 150.0 160.0 160.0 170.0 170.0 180.0 180.0 190.0 190.0 200.0 220.0 250.0 300.0 350.0 400.0 440.0 Breakdown Voltage VBR (V) @IT MIN 50.00 50.00 53.30 53.30 56.70 56.70 60.00 60.00 64.40 64.40 66.70 66.70 71.10 71.10 77.80 77.80 83.30 83.30 86.70 86.70 88.96 88.80 94.40 94.40 100.00 100.00 111.00 111.00 122.00 122.00 133.00 133.00 144.00 144.00 155.68 155.00 167.00 167.00 178.00 178.00 189.00 189.00 201.00 201.00 211.21 211.00 224.00 246.00 279.00 335.00 391.00 447.00 492.00 MAX 61.10 55.30 65.10 58.90 69.30 62.70 73.30 66.30 78.70 71.20 81.50 73.70 86.90 78.60 95.10 86.00 102.00 92.10 106.00 95.80 108.80 97.60 115.00 104.00 122.00 111.00 136.00 123.00 149.00 135.00 163.00 147.00 176.00 159.00 190.40 171.00 204.00 185.00 218.00 197.00 231.00 209.00 244.80 220.00 258.40 232.00 247.00 272.00 309.00 371.00 432.00 494.00 543.00 Test Current IT (mA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @IPP (V) 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 139.0 126.0 143.2 129.6 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 250.6 226.8 268.0 243.0 287.0 259.0 304.0 275.0 322.2 291.6 340.1 307.8 324.0 356.0 405.0 486.0 567.0 648.0 713.0 Maximum Peak Pulse Current IPP (A) 37.36 41.27 35.09 38.76 32.93 36.41 31.15 34.44 29.13 32.05 28.04 30.99 26.32 29.13 24.00 26.55 22.39 24.79 21.58 23.81 20.95 23.15 19.87 21.90 18.75 20.55 16.76 18.52 15.31 16.95 14.02 15.54 12.99 14.35 11.97 13.23 11.19 12.35 10.45 11.58 9.87 10.91 9.31 10.29 8.82 9.75 9.26 8.43 7.41 6.17 5.29 4.63 4.21 Maximum Reverse Leakage IR @VRWM (μA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 3/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PPPM - Peak Pulse Power (kW) 100 10 1 0.1 0.1 1 10 100 td - Pulse Width (μs) 1000 60 40 20 0 0 25 50 75 100 125 TA-Ambient temperature(°C) 150 175 Figure 4 - Typical Junction Capacitance 100000 150 tr=10µsec Peak Value IPPM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM CJ – Junction Capacitance (pF) IPPM - Peak Pulse Current, % IRSM 80 10000 Figure 3 - Pulse Waveform 100 Half Value IPPM (IPPM/2) 50 10/1000µsec. Waveform as defined by R.E.A Bi-directional @zero bins 10000 Uni-directional @zero bins 1000 Uni-directional @VRWM 100 tc 0 0 10 Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @VRWM 1 1.0 2.0 t - Time (ms) 3.0 1.0 4.0 Figure 5 - Steady State Power Derating Curve 10.0 100.0 VBR-Reverse Breakdown Voltage (V) 1000.0 Figure 6 - Maximum Non-Repetitive Surge Current 300 6.0 IFSM-Peak Forward Surge Current (A) PM(AV), Steady State Power Dissipation (W) 100 5.0 4.0 3.0 2.0 1.0 0.0 TJ=TJ max. 8.3 ms Single Half Sine-Wave 250 200 150 100 0 25 50 75 100 125 150 TL - Lead Temperature(°C) 175 200 1 SOCAY Electronics Co., Ltd. Revision September 25, 2013 10 Number of Cycles at 60Hz 100 www.socay.com 4/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W I-V Curve Characteristics Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 gram Temperature Cycle JESD22-A104 JEDEC DO-214AB Molded Plastic over glass passivated junction Color band denotes cathode except Bipolar Matte Tin-plated leads, Solderable per JESD22-B102D Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Case Polarity Terminal Soldering Parameters Reflow Condition Lead–free assembly TP Ramp-up Critical Zone TL to TP Temperature TL TS(max) Pre Heat -Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 -180 Seconds Ramp-down TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Average ramp up rate ( Liquidus Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 -150 Seconds Reflow Time Peak Temperature (TP) Time within 5°C Temperature (tp) SOCAY Electronics Co., Ltd. Revision September 25, 2013 260 +0/-5°C of actual peak 20 -40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 280°C www.socay.com 5/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Dimensions Inches DO-214AB (SMC) Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.86 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - Cathode Band Part Numbering Part Marking SMDJ×××CA Socay Logo 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE Cathode Band Marking Code SERIES SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 6/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Packaging Part Number Component Package Quantity SMDJXXXXX DO-214AB 500 Packaging Option Tape & Reel -16mm/7″tape Packaging Specification EIA STD RS-481 Tape and Reel Specifications 7.0 (177.8) 0.157 (4.0) 0.059 Diameter (1.5) 0.630 (16.0) 0.36 (9.2) 0.512(13.0) Arbor Hole Diameter 0.315 (8.0) Cover tape 0.646 (16.4) Direction of Feed Dimensions are in inches (and millimeters) SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 7/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.