MAMXSS0013 Low Cost MMIC Mixer 1400 - 2100 MHz Rev. V2 Features • • • • • • • • • • Functional Block Diagram +12 dBm Input Power @ 1 dB Compression High Isolation, 28 dB LO to RF +3 to +8 dBm LO Drive Level DC - 500 MHz 3 dB IF Bandwidth Does not require DC bias Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MD54-0006 Description M/A-COM’s MAMXSS0013 is a passive mixer that achieves the performance of a double balanced diode mixer in a lead-free SOT-25 package. The MAMXSS0013 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/ down conversion, modulation and demodulation in receivers and transmitters for base station and portable systems. The MAMXSS0013 uses FETs as mixing elements to achieve very wide dynamic range in a low cost plastic package. The mixer operates with LO drive levels of +3 dBm to +8 dBm. The LO port may be externally tuned for operation in various frequency bands. M/A-COM’s MAMXSS0013 is fabricated using a mature 0.5 micron gate length GaAs MESFET process. The process features full passivation for increased performance and reliability. The MAMXSS0013 is 100% RF tested to ensure performance specification compliance. Ordering Information1 Part Number Package MAMXSS0013 Bulk Packaging MAMXSS0013TR-3000 3000 piece reel MAMX-000013-001SMB Sample Board 1500 MHz MAMX-000013-002SMB Sample Board 1710 MHz MAMX-000013-003SMB Sample Board 2300 MHz Pin Configuration Pin No. Pin Name Description 1 LO Port LO Input 2 Ground Ground 3 Ground Ground 4 RF Port RF Input 5 IF Port IF Output External Circuitry Parts List 2,3 LO Frequency Part 1500 MHz 1710 MHz 2300 MHz R1 470 Ω 470 Ω 820 Ω L1 6.8 nH 4.7 nH 2.7 nH C1 3.3 pF 2.2 pF 2.2 pF 2. The external LO matching network allows tuning from 1400 MHz to 2300 MHz. The networks given above are intended to serve as guidelines for matching in different bands. 3. All off-chip components are low-cost surface mount components obtainable from multiple sources (0.060 in. x 0.030 in. or 0.080 in. x 0.050 in). 1. Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMXSS0013 Low Cost MMIC Mixer 1400 - 2100 MHz Rev. V2 Electrical Specifications4: RF = 1850 MHz (-10 dBm), LO = 1710 MHz (+5 dBm), IF = 140 MHz, TA = 25°C Parameter Test Conditions Conversion Loss Units Min. Typ. Max. dB — 8.0 9.0 Isolation LO to RF LO to IF RF to IF dB dB dB — — — 28 15 15 — — — VSWR RF Port LO Port 3 IF Port Ratio Ratio Ratio — — — 2.0:1 2.0:1 2.0:1 — — — Input 1 dB Compression LO = +5 dBm, RF Freq: 1850 MHz dBm — 12 — Two-Tone IM Ratio 5 Two Tones at -10 dBm each, Tone spacing = 100 KHz, IF = 140 MHz dBc — 55 — 4. With external LO Port matching. See functional block diagram. 5. IMR vs. RF drive can be calculated by the formula: IMR = 40-1.5*Pin. Parameter Absolute Maximum RF Input Power +27 dBm LO Drive Power +27 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. Spurious Table Harmonic of LO Absolute Maximum Ratings 6,7 4x 38.3 27.3 41.3 39.9 45.4 52.5 64.7 77.1 57.0 78.7 3x 21.4 10.5 30.1 30.1 69.0 70.5 43.0 58.8 68.3 76.8 2x 9.0 -0.9 36.1 36.4 36.0 45.8 65.8 75.0 64.3 78.0 1x 1.9 -6.0 0 0 44.8 55.5 56.1 75.2 65.0 78.3 0x X X 8.1 8.3 45.5 54.4 56.8 72.3 72.9 74.3 0x 1x 2x 3x 4x Harmonic of RF The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated relative to the IF. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of 0 dBm, the lower number is for -10 dBm. |nFRF - mFLO |, RF = 0 dBm |nFRF - mFLO |, RF = -10 dBm RF Frequency = 1850 MHz LO Frequency = 1710 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMXSS0013 Low Cost MMIC Mixer 1400 - 2100 MHz Rev. V2 Recommended PCB Configuration Layout View Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.2 mm) yielding a 50 Ω line width of 0.015” (0.38). The recommended metalization is 1 ounce copper. Lead-Free SOT-25† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMXSS0013 Low Cost MMIC Mixer 1400 - 2100 MHz Rev. V2 Typical Performance Curves • • Test Conditions for Down Converter Application: RF = 1850 MHz (-10 dBm), IF = 140 MHz, LO = 1710 MHz (+5 dBm). Test Conditions for Up Converter Application: LO = 1710 MHz (+5 dBm), IF = 140 MHz (-10 dBm), RF = 1850 MHz. Conversion Loss (Up/Down) VSWR 5.0 10 4.0 LO RF 9 3.0 8 2.0 7 1700 1800 1900 1.0 1700 2000 1800 1900 2000 RF Frequency (MHz) RF Frequency (MHz) Isolation Two-Tone IMR 40 80 LO TO IF LO TO RF RF TO IF 70 30 60 20 50 10 40 1700 1800 1900 0 1700 2000 1800 1900 2000 RF Frequency (MHz) RF Frequency (MHz) Wide• Test Conditions for Wide-Band Application: RF = -10 dBm, IF = 140 MHz, LO = +11 dBm, LO Port resistively matched. Lower LO drive operation is available for narrow band performance using external reactive matching. The 3 dB IF bandwidth is 500 MHz. IF frequencies above 200 MHz can be optimized for low conversion loss by using external matching components. Conversion Loss Two-Tone IMR 10 80 70 9 60 8 50 7 1400 4 1575 1750 1925 RF Frequency (MHz) 2100 40 1400 1575 1750 1925 2100 Frequency (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.