LED405-30M32 stem type LED with ball lens LED405-30M32 is an InGaN LED mounted on TO-18 stem with ball glass lens, being designed for sensing devices. On forward bias it emits a spectral band of radiation, which peaks at 405 nm. Features Outer dimensions Unit:mm 1) High Power 2) High Reliability Specifications 1) Product Name 2) Type No. 3) Chip Spec. (1) Material (2) Peak Wavelength 4) Package (1) Type (2) Lens LED Lamp LED405-30M32 InGaN 405nm TO-18 stem Ball Glass Lens Absolute Maximum Ratings Item Power Dissipation Forward Current Pulse Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Maximum Rated Value Unit Ambient Temperature PD IF IFP VR TOPR 120 30 100 5 -30 ~ +85 -30 ~ +100 260 mW mA mA V °C °C °C Ta=25°C Ta=25°C Ta=25°C Ta=25°C TSTG TSOL ‡Pulse Forward Current condition: Duty=1% and Pulse Width=10us. ‡Soldering condition: Soldering condition must be completed within 3 seconds at 260° Electro-Optical Characteristics Item Forward Voltage Reverse Current Total Radiated Power Brightness Radiant Intensity Peak Wavelength Half Width Viewing Half Angle Symbol VF IR PO IV IE λP Δλ θ 1/2 Condition IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA Minimum Typical 3.8 0.3 10 5 395 0.8 20 15 405 15 ±10 Maximum 4.3 10 415 Unit V uA mW mcd mW/sr nm nm deg. ‡Total Radiated Power is measured by Photodyne #500 ‡Radiant Intensity is measured by Tektronix J-6512 17.08.2010 led405_30m32.doc 1 of 1