DATA SHEET OUTPUT_3A Applications GSM, DCS, PCS, CDMA, WCDMA, and TD-SCDMA differential filter switching OUTPUT_3B SKY13399-468LF: 10 to 2700 MHz DPx3T Switch Features Broadband frequency range: 10 to 2700 MHz Low insertion loss: 0.25 dB typical @ 25 MHz 0.35 dB typical @ 1 GHz 0.4 dB typical @ 2.2 GHz OUTPUT_2A OUTPUT_2B INPUT_A INPUT_B GND VDD INPUT_A INPUT_B GND Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. 14 13 12 11 10 GND OUTPUT_3B 17 7 OUTPUT_1A OUTPUT_3A 18 6 OUTPUT_1B 4 5 GND 8 OUTPUT_2B 16 OUTPUT_2A VCTL_1 GND GND GND 9 3 Figure 1. SKY13399-468LF Block Diagram Description The SKY13399-468LF is manufactured using a state of the art Silicon on Insulator (SOI) process, and is provided in a compact Quad Flat No-Lead (QFN) 2 x 2 mm package. 15 2 S2573 The SKY13399-468LF is a double-pole, crossed three-throw (DPx3T) switch with on-die crossovers. The two inputs can be switched to three different pairs of outputs. Two control lines are used to determine which pair of outputs is connected. VCTL_2 1 OUTPUT_1B Small, QFN (18-pin, 2 x 2 mm) package (MSL1, 260 C per JEDEC J-STD-020) OUTPUT_1A Wide VDD supply range: 2.5 to 4.8 V Crossovers implemented on die for ease of use A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. S2572 Figure 2. SKY13399-468LF Pinout – 18-Pin QFN (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 1 DATA SHEET • SKY13399-468LF DPX3T SWITCH Table 1. SKY13399-468LF Signal Descriptions Pin 1 Name GND Description Pin Name Ground 10 GND Description Ground 2 GND Ground 11 INPUT_B RF input 3 OUTPUT_2A RF output paired with output 2B 12 INPUT_A RF input 4 OUTPUT_2B RF output paired with output 2A 13 VDD Supply voltage input. 5 GND Ground 14 GND Ground 6 OUTPUT_1B RF output paired with output 1A 15 VCTL2 Switch control voltage 2 7 OUTPUT_1A RF output paired with output 1B 16 VCTL1 Switch control voltage 1 8 GND Ground 17 OUTPUT_3B RF output paired with output 3A 9 GND Ground 18 OUTPUT_3A RF output paired with output 3B Table 2. SKY13399-468LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Supply voltage VDD 5 V Control voltage VCTL 3.0 V Input power PIN +30 dBm Storage temperature TSTG –40 +125 C Operating temperature TOP –40 +85 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13399-468LF are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics of the SKY13399-468LF are illustrated in Figures 3 through 8. Operating logic is described in Table 4. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624F DATA SHEET • SKY13399-468LF DPX3T SWITCH Table 3. SKY13399-468LF Electrical Specifications (1 of 2) (Note 1) (VDD = 2.7 V, VCTL = 1.8 V, PIN = 0 dBm, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 0.25 0.35 0.40 0.35 0.45 0.55 dB dB dB Insertion loss (INPUT_A/B to OUTPUT_1A/B, OUTPUT_2A/B, and OUTPUT_3A/B) 25 MHz 0.7 to 1.0 GHz 1.8 to 2.2 GHz Isolation (INPUT_A/B to OUTPUT_1A/B, OUTPUT_2A/B, and OUTPUT_3A/B) 25 MHz 0.7 to 1.0 GHz 1.8 to 2.2 GHz 55 33 24 64 42 33 dB dB dB 25 MHz 0.7 to 1.0 GHz 1.8 to 2.2 GHz 50 25 19 60 27 21 dB dB dB 25 MHz 0.7 to 2.2 GHz 17 15 25 20 dB dB Isolation (INPUT_A to INPUT_B) ANTISO Return loss (INPUT_A/B to OUTPUT_1A/B, OUTPUT_2A/B, and OUTPUT_3A/B) Phase error (A vs B path) –3 Switching on/off time +3 deg 50% VCTL to 90/10% RF 550 ns 25 MHz 0.7 to 2.2 GHz +29 +30 dBm dBm Harmonics PIN = +10 dBm, 0.7 to 2.2 GHz +100 dBc Triple beat ratio Transmit power = –24 dBm, blocking power = –20 dBm, transmit frequency = 826 and 827 MHz, blocking frequency = 871 MHz, measured at 870 and 872 MHz +110 dBc Transmit power = –30 dBm, blocking power = –15 dBm +130 dBc +130 dBc 0.1 dB Input Compression Point 2nd Order Intermodulation Distortion IP0.1dB IMD2 Band 5: transmit frequency = 836.5 MHz, blocking frequency = 45.1718 MHz, receive frequency = 881.5 MHz Band 8: transmit frequency = 897.5 MHz, blocking frequency = 45 and 1840 MHz, receive frequency = 942.5 MHz Band 17: transmit frequency = 710 MHz, blocking frequency = 30 and 1450 MHz, receive frequency = 740 MHz 3rd Order Intermodulation Distortion IMD3 Transmit power = –24 dBm, blocking power = –20 dBm Band 5: transmit frequency = 836.5 MHz, blocking frequency = 791.5 and 2554.5 MHz, receive frequency = 881.5 MHz Band 8: transmit frequency = 897.5 MHz, blocking frequency = 852.5 and 2737.5 MHz, receive frequency = 942.5 MHz Band 17: transmit frequency = 710 MHz, blocking frequency = 680 and 2160 MHz, receive frequency = 740 MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 3 DATA SHEET • SKY13399-468LF DPX3T SWITCH Table 3. SKY13399-468LF Electrical Specifications (2 of 2) (Note 1) (VDD = 2.7 V, VCTL = 1.8 V, PIN = 0 dBm, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Spurious emissions Min Typical Any frequency, no RF input Max Units –110 dBm Control voltage VCTL_LOW 0 0.50 V VCTL_HIGH 1.65 2.70 V Supply voltage VDD 2.5 5.0 V Supply current IDD Control current ICTL VDD = 2.7 V μA 33.5 μA 2 Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 4. SKY13399-468LF Truth Table Note: VCTL1 (Pin 16) VCTL2 (Pin 15) Insertion Loss Path 1 0 INPUT_A to OUTPUT_1A, INPUT_B to OUTPUT_1B 0 0 INPUT_A to OUTPUT_2A, INPUT_B to OUTPUT_2B 0 1 INPUT_A to OUTPUT_3A, INPUT_B to OUTPUT_3B “1” = +1.65 to +2.70 V. “0” = 0 V to +0.5 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device. Typical Performance Characteristics (VDD = 2.7 V, VCTL = 1.8 V, PIN = 0 dBm, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) 0 0 Input A to Output 1A Input B to Output 1B Input A to Output 2A Input B to Output 2B –0.1 –0.2 –0.2 –0.3 –0.3 Insertion Loss (dB) Insertion Loss (dB) –0.1 –0.4 –0.5 –0.6 –0.7 –0.4 –0.5 –0.6 –0.7 –0.8 –0.8 –0.9 –0.9 –1.0 –1.0 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Figure 3. Insertion Loss vs Frequency (1A, 1B) 3.0 0 0.5 1.0 1.5 2.0 Frequency (GHz) Figure 4. Insertion Loss vs Frequency (2A, 2B) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 2.5 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624F 3.0 DATA SHEET • SKY13399-468LF DPX3T SWITCH 0 0 Input A to Output 3A Input B to Output 3B –0.1 –0.2 –20 –0.3 Isolation (dB) Insertion Loss (dB) Input A to Output 2A Input A to Output 3A Input B to Output 2B Input B to Output 3B –10 –0.4 –0.5 –0.6 –30 –40 –50 –0.7 –60 –0.8 –0.9 –70 –1.0 0 0.5 1.0 1.5 2.0 2.5 –80 3.0 0 0.5 Frequency (GHz) 1.5 2.0 2.5 3.0 Frequency (GHz) Figure 5. Insertion Loss vs Frequency (3A, 3B) Figure 6. Isolation vs Frequency (1A, 1B On) 0 0 Input A to Output 1A Input A to Output 3A Input B to Output 1B Input B to Output 3B –10 –20 –20 –30 –30 –40 –50 –40 –50 –60 –60 –70 –70 –80 –80 0 0.5 1.0 1.5 2.0 Frequency (GHz) Figure 7. Isolation vs Frequency (2A, 2B On) 2.5 Input A to Output 1A Input A to Output 2A Input B to Output 1B Input B to Output 2B –10 Isolation (dB) Isolation (dB) 1.0 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Figure 8. Isolation vs Frequency (3A, 3B On) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 5 DATA SHEET • SKY13399-468LF DPX3T SWITCH Evaluation Board Package and Handling Information The SKY13399-468LF Evaluation Board is used to test the performance of the SKY13399-468LF DPx3T Switch. An Evaluation Board schematic diagram is provided in Figure 9. An assembly drawing for the Evaluation Board is shown in Figure 10. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. THE SKY13399-468LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Package Dimensions The PCB layout footprint for the SKY13399-468LF is provided in Figure 11. Typical case markings are shown in Figure 12. Package dimensions for the 18-pin QFN are shown in Figure 13, and tape and reel dimensions are provided in Figure 14. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. RFB RFA VDD 15 16 V1 VDD VCTL_2 10 GND 11 INPUT_B V2 12 INPUT_A 13 GND 14 GND VCTL_1 GND 17 2 3 4 RF1A 6 OUTPUT_1B RF1B GND OUTPUT_2A GND GND OUTPUT_3A 1 OUTPUT_2B OUTPUT_1A 18 RF3A 8 7 OUTPUT_3B RF3B 9 5 RF2A RF2B S2774 Figure 9. SKY13399-468LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624F DATA SHEET • SKY13399-468LF DPX3T SWITCH S2773 Figure 10. SKY13399-468LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 7 DATA SHEET • SKY13399-468LF DPX3T SWITCH 2X 0.490 R0.30 Typ 14X 0.790 14X 0.360 14X 0.326 18X 0.200 2X 0.490 0.400 Pitch 4X 0.824 Pin 18 C’0.30 Pin 1 Indicator Exposed Soldering Area Pin 1 Package Outline S2808 All measurements in millimeters Figure 11. SKY13399-468LF PCB Layout Footprint Skyworks Part # Pin 1 Indicator Figure 12. Typical Case Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624F DATA SHEET • SKY13399-468LF DPX3T SWITCH Seating Plane –C– 2.00 –A– Detail C 0.98 +0.10/–0.15 0.02 +0.03/–0.02 –B– Detail B Detail A R0.30 Typ. 2.00 Pin 18 Pin 1 Indicator 0.98 +0.10/–0.15 0.40 Pitch 4X 0.20 0.05 C 2X 18° Exposed Pad 0.45 ± 0.05 2X 18X 3 0.05 C 0.05 C 0.05 C Top View Pin 1 0.25 Min 14 Places Side View C’0.30 Pin 1 Indicator Bottom View 0.150 Typ. 0.21 ± 0.05 5 0.21 ± 0.05 0.150 Typ. 0.07 M C A B 0.176 ± 0.05 0.150 Typ. 0.2 ± 0.05 0.175 ± 0.05 0.2 ± 0.05 5 5 0.07 M C A B 0.07 M C A B Detail A Detail B Detail C Scale: 100X 10 Places Scale: 100X 2 Places Plus 2 Places Mirrored Scale: 100X 2 Places Plus 2 Places Mirrored All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the terminals and all other bottom surface metalization. Dimension applies to metalized terminal. If the terminal has a radius on its end, the width dimension should not be measured in that radius area. S2571 Figure 13. SKY13399-468LF 18-Pin QFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 9 DATA SHEET • SKY13399-468LF DPX3T SWITCH Pin #1 Indicator ∅1.50 +0.10/–0 B A A B 0.70 ± 0.05 (Ko) 4.00 ± 0.10 B 7° Notes: 1. Carrier tape: black conductive polycarbonate bakeable material at 125 °C. 2. Carrier tape material: transparent conductive PSA. 3. Cover tape material: transparent conductive with 5.40 mm width. 4. ESD-surface resistivity is ≥1 x 104 ~ ≤1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 5. All dimensions are in millimeters. 2.25 ± 0.05 (Ao) A Figure 14. SKY13399-468LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 January 27, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624F S2712 8.00 ± 0.20 2.25 ± 0.05 (Bo) 7° 1.75 ± 0.10 4.00 ± 0.10 3.50 ± 0.05 2.00 ± 0.05 0.23 ± 0.05 DATA SHEET • SKY13399-468LF DPX3T SWITCH Ordering Information Model Name SKY13399-468LF DPx3T Switch Manufacturing Part Number SKY13399-468LF Evaluation Board Part Number SKY13399-468LF-EVB Copyright © 2011-2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201624F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 27, 2014 11