Data Sheet - Skyworks Solutions, Inc.

DATA SHEET
SMP1345-087LF: Surface Mount PIN Diode
Applications
• Switches
• Attenuators
Features
• Low-series resistance: 2 Ω maximum @ 10 mA
• Low total capacitance: 0.2 pF maximum @ 5 V
• QFN (2 x 2 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
Description
The SMP1345-087LF is a surface mountable PIN diode suitable
for use in an RF switch or attenuator circuit.
Maximum resistance at 10 mA is 2 Ω and maximum capacitance
at 5 V is 0.2 pF. The combination of low capacitance, low parasitic
inductance, and nominal 10 μm I-region width, makes the
SMP1345-087LF useful in large signal switches and attenuator
applications.
The device has a 0.5 W dissipation power rating, which makes it
capable of handling up to 40 W Continuous Wave (CW) and 440 W
peak (1 μs pulse, 1% duty cycle) in a series-connected
transmit/receive (T/R) switch.
Design information for high power switches may be found in the
Skyworks Application Note, Design With PIN Diodes (document
number 200312).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201546E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 18, 2013
1
DATA SHEET • SMP1345-087LF SURFACE MOUNT PIN DIODE
Table 1. SMP1345-087LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
200
mA
Forward current
IF
Dissipated power @ 85 °C
PD
0.5
W
Operating temperature
TA
–55
+150
°C
Storage temperature
TSTG
–55
+200
°C
Junction temperature
TJ
–55
+175
°C
Electrostatic Discharge, Human Body Model (HBM), Class 1B
ESD
*** TBD ***
V
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. SMP1345-087LF Electrical Specifications (Note 1)
(TA = +25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Forward voltage
VF
IF = 10 mA
Reverse leakage current
IR
VR = 50 V
Series resistance
RS
Min
Max
0.89
Units
V
10
μA
2.0
Ω
Ω
f = 100 MHz
IF = 10 mA
IF = 1 mA
Total capacitance
Typical
1.5
3.5
CT1
f = 1 MHz
CT5
VR = 1 V
VR = 5 V
0.17
0.16
IF = 10 mA
0.20
pF
pF
Minority carrier lifetime
TL
100
ns
I region width
W
10
μm
Thermal resistance (Note 2)
θJC
77
°C/W
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: Measurement based on a thermal resistance of 92 °C/W for the junction-to-bottom of circuit board.
Electrical and Mechanical Specifications
Package and Handling Information
The absolute maximum ratings of the SMP1345-087LF are
provided in Table 1. Electrical specifications are provided in
Table 2.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Typical performance characteristics of the SMP1345-087LF are
illustrated in Figures 1 through 5.
Package Dimensions
The PCB layout footprint for the SMP1345-087LF is provided in
Figure 6. Typical case markings are shown in Figure 7. Package
dimensions for the SMP1345-087LF are provided in Figure 8,
and tape and reel dimensions are provided in Figure 9.
The SMP1345-087LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
June 18, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201546E
DATA SHEET • SMP1345-087LF SURFACE MOUNT PIN DIODE
Typical Performance Characteristics
(TA = 25 °C, Unless Otherwise Noted)
Figure 1. Total Capacitance vs Reverse Voltage
Figure 2. Series Resistance vs Forward Current @ 100 MHz
Figure 3. Insertion Loss vs Frequency
(IF = 10 mA)
Figure 4. Isolation vs Frequency
(IF = 0 mA)
Figure 5. Return Loss vs Frequency
(IF = 10 mA)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201546E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 18, 2013
3
DATA SHEET • SMP1345-087LF SURFACE MOUNT PIN DIODE
Figure 6. SKY1345-087LF PCB Layout Footprint
(Top View)
Figure 7. Typical Case Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
June 18, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201546E
DATA SHEET • SMP1345-087LF SURFACE MOUNT PIN DIODE
Figure 8. SMP1345-087LF Package Dimensions
Figure 9. SMP1345-087LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201546E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 18, 2013
5
DATA SHEET • SMP1345-087LF SURFACE MOUNT PIN DIODE
Ordering Information
Model Name
SMP1345-087LF Surface Mount PIN Diode
Manufacturing Part Number
SMP1345-087LF
Copyright © 2011, 2012, 2013 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
June 18, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201546E