Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SKYA21002: 0.1 to 3.0 GHz SP3T Switch
Automotive Applications
RF3 V3
 Infotainment
 Automated toll systems
 Garage door opener
 802.11 b/g/n WLAN, Bluetooth systems
 Wireless control systems
RF2
RFC
V2
 Outdoor lighting control
 Remote keyless entry
 Telematics
 GPS/Navigation
RF1 V1
S1923
Figure 1. SKYA21002 Block Diagram
Features
 Excellent linearity performance: P1dB = +29 dBm @ 3 V
 Low insertion loss: 0.5 dB @ 2.5 GHz
 High isolation: 25 dB @ 2.5 GHz
 Positive low voltage control: 0/3 V
 Miniature, ultra-thin DFN (8-pin, 2 x 2 mm) package
 Designed and manufactured in an ISO/TS16949-certified facility
 AEC-Q100 qualified at 25 °C
 JEDEC (JESD22) qualified at 25 °C
 Lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per
JEDEC J-STD-020
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Description
The SKYA21002 is a Single-Pole, Triple-Throw (SP3T) antenna
switch that operates in the 0.1 to 3.0 GHz frequency range.
Switching between the antenna (RFC signal) and the RF1, RF2,
and RF3 ports is accomplished with three control voltages.
The low loss, high isolation, high linearity, and small size make
this switch ideal for all WLAN and Bluetooth systems operating in
the 2.4 to 2.5 GHz band.
The switch is manufactured in a compact, 2 x 2 mm, 8-pin Dual
Flat No-Lead (DFN) package. A functional block diagram is shown
in Figure 1. The pin configuration and package are shown in
Figure 2. Signal pin assignments and functional pin descriptions
are provided in Table 1.
RFC
1
8
RF3
N/C
2
7
V3
V1
3
6
V2
RF1
4
5
RF2
S2162
Figure 2. SKYA21002 Pinout – 8-Pin DFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
1
DATA SHEET • SKYA21002 SP3T SWITCH
Table 1. SKYA21002 Signal Descriptions
Pin #
1
Name
RFC
Description
Pin #
Name
Description
Antenna. DC blocking capacitor required.
5
RF2
RF port 2. DC blocking capacitor required.
2
N/C
No connection
6
V2
Switch logic control (see Table 4)
3
V1
Switch logic control (see Table 4)
7
V3
Switch logic control (see Table 4)
4
RF1
RF port 1. DC blocking capacitor required.
8
RF3
RF port 3. DC blocking capacitor required.
Table 2. SKYA21002 Absolute Maximum Ratings
Parameter
Symbol
Input power:
@ 0/3 V
@ 0/5 V
PIN
Operating voltage
VDD
Minimum
Maximum
Units
+30
+32
dBm
dBm
+8.0
V
Operating temperature
TOP
–40
+85
C
Storage temperature
TSTG
–65
+150
C
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKYA21002 are provided in
Table 2. Electrical specifications are provided in Table 3.
Typical performance characteristics of the SKYA21002 are
illustrated in Figures 3 through 20. The state of the SKYA21002 is
determined by the logic provided in Table 4.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B
DATA SHEET • SKYA21002 SP3T SWITCH
Table 3. SKYA21002 Electrical Specifications (Note 1)
(VHIGH = 2.1 to 5.0 V, TOP = +25 C, Unless Otherwise Noted)
Parameter
Insertion loss
Symbol
IL
Test Condition
Min
|S11|
ISO
10/90% RF
90/10% RF
50% control to 90/10%
RF
50% control to 90/10%
RF
Off time
rd
3 order input intercept point
IP1dB
IIP3
dB
dB
20
20
dB
dB
22
22
25
25
dB
dB
50
18
ns
ns
55
ns
20
ns
mV
+29.0
dBm
+37
+45
dBm
dBm
VLOW = 0 to 0.25 V
@ 5 μA typical
0
V
VHIGH = 2.1 to 5.0 V
@ 10 μA typical
3.3
V
@ 2450 MHz, VLOW = 0 V,
VHIGH = 3.3 V
@ 2450 MHz, two-tone
input power @ +17 dBm
VLOW = 0 V, VHIGH = 2.1 V
VLOW = 0 V, VHIGH = 3.3 V
Control voltage
0.75
0.65
40
Video feedthrough
1 dB input compression point
0.60
0.50
RFC to RF1, RF2, RF3
0.1 to 3.0 GHz
2.4 to 2.5 GHz
Switching speed:
Rise time
Fall time
On time
Units
RFC to RF1, RF2, RF3
0.1 to 3.0 GHz
2.4 to 2.5 GHz
Isolation
Max
RFC to RF1, RF2, RF3
0.1 to 3.0 GHz
2.4 to 2.5 GHz
Return loss (insertion loss state)
Typical
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
3
DATA SHEET • SKYA21002 SP3T SWITCH
Typical Performance Characteristics
(VDD = 0/3.3 V, TOP = +25 C, Unless Otherwise Noted)
dB (Tx_IL_unit 1)
dB (Tx_IL_unit 3)
dB (Tx_IL_unit 2)
dB (Tx_IL_unit 4)
dB (Tx_BT_ISO_unit 1)
dB (Tx_BT_ISO_unit 3)
0
dB (Tx_BT_ISO_unit 2)
dB (Tx_BT_ISO_unit 4)
0
–0.1
–10
–0.3
Isolation (dB)
Insertion Loss (dB)
–0.2
–0.4
–0.5
–0.6
–0.7
–0.8
–20
–30
–40
–50
–0.9
–1.0
–60
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
Frequency (GHz)
2.0
dB (Tx_BT_ISO_unit 2)
dB (Tx_BT_ISO_unit 4)
dB (Tx_Rx_ISO_unit 1)
dB (Tx_Rx_ISO_unit 3)
0
0
–10
–10
–20
–20
–30
–40
–50
3.0
dB (Tx_Rx_ISO_unit 2)
dB (Tx_Rx_ISO_unit 4)
–30
–40
–50
–60
–60
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Figure 5. RFC to RF1 Return Loss
2.5
3.0
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Figure 6. RFC to RF2 Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
2.5
Figure 4. RFC to RF3 Isolation
Isolation (dB)
Isolation (dB)
1.5
Frequency (GHz)
Figure 3. RFC to RF1 Insertion Loss
dB (Tx_BT_ISO_unit 1)
dB (Tx_BT_ISO_unit 3)
1.0
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B
2.5
3.0
DATA SHEET • SKYA21002 SP3T SWITCH
dB (ANT_BT_ISO_Tx_unit 1)
dB (ANT_BT_ISO_Tx_unit 2)
–10
–10
–20
–20
Isolation (dB)
Isolation (dB)
0
–30
–40
dB (ANT_Rx_ISO_Tx_unit 3)
dB (ANT_Rx_ISO_Tx_unit 4)
dB (ANT_Rx_ISO_Tx_unit 1)
dB (ANT_Rx_ISO_Tx_unit 2)
0
dB (ANT_BT_ISO_Tx_unit 3)
dB (ANT_BT_ISO_Tx_unit 4)
–30
–40
–50
–50
–60
–60
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0.5
1.5
2.0
2.5
3.0
Frequency (GHz)
Frequency (GHz)
Figure 7. RF1 to RF2 Isolation
dB (Rx_IL_unit 1)
dB (Rx_IL_unit 3)
1.0
Figure 8. RF1 to RF3 Isolation
dB (Rx_BT_ISO_unit 1)
dB (Rx_BT_ISO_unit 3)
dB (Rx_IL_unit 2)
dB (Rx_IL_unit 4)
dB (Rx_BT_ISO_unit 2)
dB (Rx_BT_ISO_unit 4)
0
0
–0.1
–10
–0.3
Isolation (dB)
Insertion Loss (dB)
–0.2
–0.4
–0.5
–0.6
–0.7
–0.8
–20
–30
–40
–50
–0.9
–60
0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Figure 9. RFC to RF2 Insertion Loss
3.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Figure 10. RFC to RF2 Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
5
DATA SHEET • SKYA21002 SP3T SWITCH
dB (Rx_IRL_unit 2)
dB (Rx_IRL_unit 4)
dB (Rx_ORL_unit 2)
dB (Rx_ORL_unit 4)
dB (Rx_Tx_ISO_unit 1)
dB (Rx_Tx_ISO_unit 3)
0
0
–10
–10
–20
–20
Isolation (dB)
Input/Output Return Loss (dB)
dB (Rx_IRL_unit 1)
dB (Rx_IRL_unit 3)
dB (Rx_ORL_unit 1)
dB (Rx_ORL_unit 3)
–30
–40
–30
–40
–50
–50
–60
–60
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0.5
Figure 11. RFC to RF2 Return Loss
dB (ANT_BT_ISO_Rx_unit 1)
dB (ANT_BT_ISO_Rx_unit 2)
1.0
1.5
2.0
3.0
Figure 12. RFC to RF3 Isolation
dB (ANT_BT_ISO_Rx_unit 3)
dB (ANT_BT_ISO_Rx_unit 4)
dB (ANT_Tx_ISO_Rx_unit 1)
dB (ANT_Tx_ISO_Rx_unit 2)
0
–10
–10
–20
–20
Isolation (dB)
0
–30
–40
dB (ANT_Tx_ISO_Rx_unit 3)
dB (ANT_Tx_ISO_Rx_unit 4)
–30
–40
–50
–50
–60
–60
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Figure 13. RF2 to RF3 Isolation
2.5
3.0
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Figure 14. RF2 to RF1 Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
2.5
Frequency (GHz)
Frequency (GHz)
Isolation (dB)
dB (Rx_Tx_ISO_unit 2)
dB (Rx_Tx_ISO_unit 4)
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B
2.5
3.0
DATA SHEET • SKYA21002 SP3T SWITCH
dB (BT_IL_unit 1)
dB (BT_IL_unit 3)
0
dB (BT_IL_unit 2)
dB (BT_IL_unit 4)
dB (BT_Tx_ISO_unit 1)
dB (BT_Tx_ISO_unit 3)
0
dB (BT_Tx_ISO_unit 2)
dB (BT_Tx_ISO_unit 4)
–0.1
–10
–0.3
Isolation (dB)
Insertion Loss (dB)
–0.2
–0.4
–0.5
–0.6
–0.7
–0.8
–20
–30
–40
–50
–0.9
–1.0
–60
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
Frequency (GHz)
2.0
2.5
3.0
Figure 16. RFC to RF1 Isolation
dB (BT_IRL_unit 2)
dB (BT_IRL_unit 4)
dB (BT_ORL_unit 2)
dB (BT_ORL_unit 4)
dB (BT_Rx_ISO_unit 1)
dB (BT_Rx_ISO_unit 3)
0
0
–10
–10
–20
–20
Isolation (dB)
Input/Output Return Loss (dB)
1.5
Frequency (GHz)
Figure 15. RFC to RF3 Insertion Loss
dB (BT_IRL_unit 1)
dB (BT_IRL_unit 3)
dB (BT_ORL_unit 1)
dB (BT_ORL_unit 3)
1.0
–30
dB (BT_Rx_ISO_unit 2)
dB (BT_Rx_ISO_unit 4)
–30
–40
–40
–50
–50
–60
–60
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Figure 17. RFC to RF3 Return Loss
2.5
3.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Figure 18. RFC to RF2 Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
7
DATA SHEET • SKYA21002 SP3T SWITCH
dB (ANT_Tx_ISO_BT_unit 3)
dB (ANT_Tx_ISO_BT_unit 4)
dB (ANT_Rx_ISO_BT_unit 1)
dB (ANT_Rx_ISO_BT_unit 2)
0
0
–10
–10
–20
–20
Isolation (dB)
Isolation (dB)
dB (ANT_Tx_ISO_BT_unit 1)
dB (ANT_Tx_ISO_BT_unit 2)
–30
–40
–50
dB (ANT_Rx_ISO_BT_unit 3)
dB (ANT_Rx_ISO_BT_unit 4)
–30
–40
–50
–60
–60
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
Frequency (GHz)
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
Figure 19. RF3 to RF1 Isolation
Figure 20. RF3 to RF2 Isolation
Table 4. SKYA21002 Truth Table
V1 (Pin 3)
Note:
V2 (Pin 6)
V3 (Pin 7)
Low Insertion Loss Path
High
Low
Low
RFC to RF1
Low
High
Low
RFC to RF2
Low
Low
High
RFC to RF3
High = 2.1 V to 5.0 V. Low = 0 V to 0.25 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Evaluation Board Description
Package and Handling Information
The SKYA21002 Evaluation Board is used to test the performance
of the SKYA21002 SPDT Switch. An Evaluation Board schematic
diagram is provided in Figure 21. An assembly drawing for the
Evaluation Board is shown in Figure 22.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Package Dimensions
The PCB layout footprint for the SKYA21002 is provided in Figure
23. Typical case markings are shown in Figure 24. Package
dimensions for the 8-pin DFN are shown in Figure 25, and tape
and reel dimensions are provided in Figure 26.
THE SKYA21002 is rated to Moisture Sensitivity Level 1 (MSL1) at
260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B
DATA SHEET • SKYA21002 SP3T SWITCH
CBL
1
Antenna
×
2
3
Switch Control
(See Table 4)
CBL
4
RF Port 1
RFC
RF3
N/C
V3
V1
V2
RF1
RF2
8
CBL
RF Port 3
7
Switch Control
(See Table 4)
6
5
Switch Control
(See Table 4)
CBL
RF Port 2
Note: CBL = 47 pF for >500 MHz operation; 220 pF for operation down to 50 MHz.
Higher values recommended for lower frequency operation.
Exposed paddle must be grounded.
S1925a
Figure 21. SKYA21002 Evaluation Board Schematic
RFC
RF3
RF1
RF2
GND
V1
V2
V3
GND
GND
S2163
Figure 22. SKYA21002 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
9
DATA SHEET • SKYA21002 SP3T SWITCH
8X 0.70
8X 0.45
R0.20
Pin 1
8X 0.25
0.50 Pitch
2X 0.85
0.25
2X 0.45
Exposed Solder Areas
(Typical)
All dimensions are in millimeters
S1413
Figure 23. SKYA21002 PCB Layout Footprint
(Top View)
Pin 1
Indicator
Skyworks Part #
Figure 24. Typical Case Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B
DATA SHEET • SKYA21002 SP3T SWITCH
0.90 +0.10/–0.15
C
0.15 Ref
Seating Plane
A
2
B
0.45 +0.05/–0.07
Exposed Pad
Detail A
0.02 +0.03/–0.02
Pin 1
Indicator
-B-
2
0.15 C
2X
8X
3
Detail C
0.08 C
0.55 +0.05/–0.04
0.15 C
2X
1.70 +0.10/–0.15
0.85 +0.05/–0.07
Detail B
2 Places
0.10 C
Top View
Side View
Bottom View
R0.12 Typ
0.25
0.30 ± 0.10
-A-
CL
R0.20
0.5
0.25 +0.05/–0.07 5
0.10 M C A B
0.05 M C
Detail C
Detail B
8 Places
Detail A
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
Coplanarity applies to the exposed heat sink slug as well as the terminals..
Plating requirement per source control drawing (SCD) 2504.
Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip.
S1755
Figure 25. SKYA21002 8-Pin DFN Package Dimensions
2.00 ± 0.05
4.00 ± 0.10
∅1.50+ 0.10/–0.00
1.75 ± 0.10
Pin #1
0.23 ± 0.05
A
2.25 ± 0.05
7°
3.50 ± 0.05
8.00 ± 0.20
B
0.70 ± 0.050 Ko
B
A
4.00 ± 0.10
Detail A
7°
2.25 ± 0.05
Notes:
1. Carrier tape: black conductive polycarbonate. Bakeable material at 125 °C temperature.
2. Cover tape material: transparent conductive with 5.40 mm width.
3. All measurements are in millimeters.
Detail B
Y0111
Figure 26. SKYA21002 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202937B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 5, 2013
11
DATA SHEET • SKYA21002 SP3T SWITCH
Ordering Information
Model Name
SKYA21002 0.1-3.0 GHz SP3T Switch
Manufacturing Part Number
SKYA21002
Evaluation Board Part Number
SKYA21002-EVB
Copyright © 2013 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
September 5, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202937B