Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SKYFR-000788: 2490-2710 MHz Single Junction Robust Lead
Circulator
Applications
• Power amplifiers
• Wireless infrastructure
Features
• BeO free
• Small, surface mount package
• Operating frequency range: 2490 MHz to 2710 MHz
• Shipped on tape and reel
Description
The SKYFR-000788 is a single-junction circulator designed for
wireless infrastructure applications. It operates over the frequency
range of 2490 to 2710 MHz. Insertion loss is less than 0.30 dB
over an operating temperature range of –40 °C to +95 °C.
The SKYFR-000788 comes in an industry-standard surface mount
package and is designed for automated SMT placement.
A block diagram of the SKYFR-000788 is shown in Figure 1. The
absolute maximum ratings of the SKYFR-000788 are provided in
Table 1.
Electrical specifications are provided in Table 2. Plating
information is shown in Table 3.
Figure 2 shows the package dimensions and recommended PCB
footprint. Tape and reel dimensions are provided in Figure 3.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202765B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 7, 2013
1
DATA SHEET • SKYFR-000788 ROBUST LEAD CIRCULATOR
Figure 1. SKYFR-000788 Block Diagram
Table 1. SKYFR-000788 Absolute Maximum Ratings
Parameter
Average power
Symbol
Minimum
Maximum
Units
80
W
PAVG
Peak power
PPEAK
500
W
Operating temperature
TOP
–40
+95
°C
Storage temperature
TST
–55
+125
°C
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Table 2. SKYFR-000788 Electrical Specifications (Note 1)
(TOP = –40 °C to +95 °C)
Parameter
Frequency range
Symbol
Test Condition
f
Min
Typical
2490
Impedance
Max
Units
2710
MHz
Ω
50
Insertion loss
IL
0.30
dB
Insertion loss ripple
ILp-p
0.10
db
Isolation
Iso
23
dB
Return loss
RL
21
dB
Intermodulation Distortion (Note 2)
IMD
2 x (+44.8 dBm) CW
tones, 5 MHz spacing
Harmonics
+47.8 dBm output signal
Phase flatness vs frequency
Peak-to-peak, any
50 MHz bandwidth
10
–66
dBc
–57
dBc
1.0
deg
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: See Skyworks Application Note, Intermodulation Distortion Measurements of Ferrites, document number 201537 for further details.
Table 3. SKYFR-000788 Plating
Section
Material
Plating
Pins
Bronze
Gold
Housing
Steel
Silver
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
May 7, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202765B
DATA SHEET • SKYFR-000788 ROBUST LEAD CIRCULATOR
Figure 2. SKYFR-000788 Package Dimensions and PCB Footprint
Figure 3. SKYFR-000788 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202765B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 7, 2013
3
DATA SHEET • SKYFR-000788 ROBUST LEAD CIRCULATOR
Ordering Information
Model Name
SKYFR-000788 Single Junction Lead Circulator
Manufacturing Part Number
SKYFR-000788
Evaluation Board Part Number
MAFX-000015-RLOOFR
Copyright © 2013 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
May 7, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202765B