Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SKY13441: 0.4-2.7 GHz SP10T Switch with GPIO Interface
Applications
• 2G/3G multimode cellular handsets (UMTS, CDMA2000, EDGE,
GSM)
• Embedded data cards
Features
• Broadband frequency range: 0.4 to 2.7 GHz
• Single, positive DC power supply (2.5 to 3.3 V)
• Excellent Band 13 2nd harmonic rejection
• Integrated, low-pass harmonic filter for GSM transmit paths
• Integrated GPIO interface
• Any of eight TRX ports can be used for WCDMA transmit/receive
or GSM receive functions
• Small MCM (20-pin, 3.2 x 2.5 mm) package (MSL3, 260 °C per
JEDEC J-STD-020)
Figure 1. SKY13441 Block Diagram
Description
The SKY13441 is a Single Pole, Ten-Throw (SP10T) antenna
switch with an integrated General Purpose Input/Output (GPIO)
interface and dual low-pass harmonic filters. The switch has eight
transmit/receive ports, any of which can be used for WCDMA
transmit/receive or GSM receive functions.
Using advance switching technologies, the SKY13441 maintains
low insertion loss and high isolation for both transmit and receive
switching paths. The switch also exhibits an excellent triple beat
ratio and 2nd/3rd order modulation distortion performance.
Switching is controlled by an integrated GPIO interface. Depending
on the logic applied to the decoder, the antenna pin is connected
to one of ten switched RF ports using a low insertion loss path,
while the paths between the antenna pin and the other RF pins are
in a high isolation state. No external DC blocking capacitors are
required on the RF paths.
The SKY13441 is manufactured in a compact, 3.2 x 2.5 mm,
20-pin Multi-Chip Module (MCM) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
1
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 2. SKY13441 Pinout – 20-Pin MCM
(Top View)
Table 1. SKY13441 Signal Descriptions
Pin #
Name
Description
Pin #
Name
Description
1
VC1
DC input control voltage 1
11
GND
Ground
2
GND
Ground
12
TRX7(RX1)
RF input/output port 7
3
TRX4
RF input/output port 4
13
TRX8(RX2)
RF input/output port 8
4
TRX5
RF input/output port 5
14
TRX1
RF input/output port 1
5
TRX6
RF input/output port 6
15
TRX2
RF input/output port 2
6
GND
Ground
16
TRX3
RF input/output port 3
7
ANT
Antenna RF port
17
VDD
DC power supply
8
GND
Ground
18
VC4
DC input control voltage 4
9
TX2
GSM high band transmit RF input port with
integrated harmonic filter
19
VC3
DC input control voltage 3
10
TX1
GSM low band transmit RF input port with
integrated harmonic filter
20
VC2
DC input control voltage 2
Note:
Bottom ground paddles must be connected to ground.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 2. SKY13441 Absolute Maximum Ratings
Parameter
Maximum
Units
PIN
+36
dBm
5
V
DC control voltage
VCTRL
2.7
V
Storage temperature
TSTG
–40
+125
°C
Operating temperature
TOP
–30
+90
°C
Electrostatic Discharge:
Charged Device Model (CDM)
Human Body Model (HBM)
Machine Model (MM)
ESD
*** TBD ***
*** TBD ***
*** TBD ***
V
V
V
RF input power
Symbol
Minimum
Power supply
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13441 are provided in
Table 2. Electrical specifications are provided in Table 3. Table 4
provides the control logic for the SKY13441.
Typical performance characteristics of the SKY13441 are
illustrated in Figures 3 to 13.
The isolation matrices shown in Tables 5 and 6 provide the portto-port isolation and the antenna-to-port isolation for all available
RF states at four different frequencies: 915, 1910, 2170, and
2690 MHz.
Figure 14 illustrates the test setup used to measure data for
Figure 11. This industry standardized test is used to simulate the
WCDMA Band 1 linearity of the antenna switch. A +20 dBm
Continuous Wave (CW) signal, fFUND, is sequentially applied to the
TRX1 through TRX8 ports, while a –15 dBm CW blocker signal,
fBLK, is applied to the ANT port.
The resulting 3rd Order Intermodulation Distortion (IMD3), fRX, is
measured over all phases of fFUND. The SKY13441 exhibits
exceptional performance for all TRX ports.
The insertion loss matrix shown in Table 7 provides the insertion
loss for all available RF states at eight different frequencies: 704,
824, 915, 960, 1710, 1910, 2170, and 2690 MHz.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
3
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 3. SKY13441 Electrical Specifications (Note 1) (1 of 2)
(VDD = 2.85 V, VC1 = VC2 = VC3 = VC4 = 0/1.8 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise
Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
704 to 960 MHz
0.5
0.80
dB
1710 to 2170 MHz
0.6
0.95
dB
RF Specifications
Insertion loss: ANT to TRX1 through TRX8
ports
IL
2300 to 2690 MHz
0.9
1.20
dB
Insertion loss: TRX4
IL
704 to 787 MHz
0.4
0.7
dB
Insertion loss: ANT to TX1 port
IL
824 to 915 MHz
1.35
1.55
dB
Insertion loss: ANT to TX2 port
IL
1710 to 1910 MHz
1.2
1.4
dB
Isolation: TRX1/2/3/7/8 to TRX4/5/6 ports
Iso
824 to 1910 MHz
38
45
dB
Isolation: TX1 to TRX1 through TRX8 ports
Iso
824 to 915 MHz
35
44
dB
Isolation: TX2 to TRX1 through TRX8 ports
Iso
1710 to 1910 MHz
32
39
dB
Isolation: TRX4 to TRX6 port
Iso
824 to 1910 MHz
28
31
dB
Isolation: TRX adjacent ports
Iso
824 to 1910 MHz
21
nd
Band 13 2 harmonic
B13 2fo
Harmonics
Attenuation (TX1 port)
Attenuation (TX2 port)
24
dB
1910 to 2690 MHz
20
dB
PIN = +25 dBm,
f = 787 MHz,
TRX1 to TRX8
–81
dBm
UMTS, PIN = +27 dBm:
–48
–36
dBm
TX1 port,
PIN = +35 dBm
–45
–36
dBm
TX2 port,
PIN = +33 dBm
–45
–36
dBm
GSM850:
2f
3f
>4f
25
25
28
28
20
dB
dB
dB
EGSM900:
2f
3f
>4f
25
22
28
25
20
dB
dB
dB
DCS1800:
2f
3f
>4f
25
25
28
28
20
dB
dB
dB
PCS1900:
2f
3f
>4f
25
24
28
28
20
dB
dB
dB
14
18
dB
Return loss
|S11|
0.4 to 2.2 GHz
2nd Order Input Intercept Point
IIP2
AWS, PCS, IMT to
CDMA2000 modes
2nd Order Intermodulation Distortion
IMD2
UMTS mode
3rd Order Intermodulation Distortion
IMD3
UMTS mode
+95.5
dBm
–110
–105
dBm
–105
dBm
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 3. SKY13441 Electrical Specifications (Note 1) (2 of 2)
(VDD = 2.85 V, VC1 = VC2 = VC3 = VC4 = 0/1.8 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise
Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
RF Specifications (continued)
Triple Beat Ratio
TBR
1 dB Input Compression Point
IP1dB
650 to 900 MHz
81
dBc
1710 to 2155 MHz
81
dBc
+40
dBm
+39
dBm
TX1port, 824 to 915 MHz
TX2 port, 1710 to 1910
MHz
Switching speed
10/90% RF
μs
3
5
2.85
3.30
V
50
100
μA
1.80
2.50
0.45
V
V
10
μA
μA
DC Specifications
Supply voltage
VDD
Supply current
IDD
2.50
Control voltage:
High
Low
VC1, VC2,
VC3, VC4
1.35
0
Control current:
High
Low
5
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Table 4. SKY13441 Mode Control Logic
Insertion Loss State
VC1
(Pin 1)
VC2
(Pin 20)
VC3
(Pin 19)
VC4
(Pin 18)
Standby (all ports in isolation state)
0
0
0
0
ANT to TX1
1
1
0
0
ANT to TX2
1
0
0
0
ANT to TRX8
0
1
1
0
ANT to TRX7
0
1
0
0
ANT to TRX1
0
0
1
0
ANT to TRX2
1
0
1
0
ANT to TRX3
1
1
1
0
ANT to TRX4
1
0
1
1
ANT to TRX5
1
1
1
1
ANT to TRX6
1
0
0
1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
5
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 5. TXx/TRXx to TXx/TRXx Isolation Matrix (1 of 2)
Isolation
“On” Port
Frequency
(MHz)
TX1
TX2
TRX1
TRX2
TRX3
TRX4
TRX5
TRX6
TRX7
TRX8
TX1
915
–
–25
–54
–54
–56
–59
–56
–55
–47
–52
TX1
1910
–
–33
–45
–49
–52
–56
–53
–50
–36
–40
TX1
2170
–
–29
–45
–49
–52
–56
–52
–49
–36
–40
TX1
2690
–
–24
–44
–48
–51
–55
–51
–48
–35
–39
TX2
915
–29
–
–53
–53
–56
–57
–55
–51
–48
–51
TX2
1910
–31
–
–48
–47
–48
–46
–44
–40
–43
–46
TX2
2170
–29
–
–49
–47
–48
–46
–44
–40
–44
–47
TX2
2690
–24
–
–61
–65
–62
–59
–50
–49
–47
–51
TRX1
915
–67
–37
–
–30
–36
–58
–59
–58
–40
–33
TRX1
1910
–49
–31
–
–24
–30
–46
–47
–44
–34
–27
TRX1
2170
–48
–30
–
–23
–29
–44
–46
–42
–32
–26
TRX1
2690
–44
–32
–
–21
–27
–42
–44
–39
–30
–24
TRX2
915
–58
–37
–33
–
–30
–57
–60
–57
–42
–38
TRX2
1910
–50
–31
–27
–
–24
–46
–47
–44
–35
–32
TRX2
2170
–49
–30
–26
–
–23
–44
–45
–42
–34
–31
TRX2
2690
–46
–31
–24
–
–21
–42
–43
–39
–31
–29
TRX3
915
–55
–37
–37
–32
–
–56
–60
–57
–43
–40
TRX3
1910
–50
–31
–31
–26
–
–45
–46
–44
–36
–34
TRX3
2170
–49
–30
–30
–25
–
–43
–45
–42
–35
–33
TRX3
2690
–47
–31
–28
–23
–
–41
–43
–39
–32
–31
TRX4
915
–51
–38
–59
–55
–56
–
–32
–39
–60
–60
TRX4
1910
–49
–31
–51
–48
–48
–
–26
–32
–50
–52
TRX4
2170
–49
–30
–49
–46
–46
–
–25
–31
–48
–50
TRX4
2690
–46
–31
–47
–44
–44
–
–22
–28
–45
–48
TRX5
915
–51
–38
–58
–55
–56
–34
–
–32
–59
–59
TRX5
1910
–50
–31
–50
–47
–48
–28
–
–26
–50
–51
TRX5
2170
–49
–30
–49
–46
–46
–27
–
–25
–48
–49
TRX5
2690
–47
–32
–46
–44
–44
–24
–
–22
–45
–47
TRX6
915
–50
–39
–58
–55
–56
–40
–36
–
–58
–59
TRX6
1910
–51
–32
–50
–47
–48
–33
–29
–
–49
–51
TRX6
2170
–50
–31
–48
–46
–46
–31
–28
–
–47
–49
TRX6
2690
–47
–32
–46
–44
–44
–29
–25
–
–44
–47
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 5. TXx/TRXx to TXx/TRXx Isolation Matrix (2 of 2)
Isolation
“On” Port
Frequency
(MHz)
TX1
TX2
TRX1
TRX2
TRX3
TRX4
TRX5
TRX6
TRX7
TRX8
TRX7
915
–37
–36
–36
–39
–41
–59
–59
–57
–
–30
TRX7
1910
–40
–31
–31
–32
–35
–47
–47
–44
–
–25
TRX7
2170
–38
–30
–30
–31
–34
–45
–46
–42
–
–23
TRX7
2690
–36
–32
–28
–29
–31
–43
–44
–39
–
–21
TRX8
915
–51
–37
–30
–36
–39
–59
–59
–58
–37
–
TRX8
1910
–45
–31
–24
–30
–33
–47
–47
–44
–30
–
TRX8
2170
–43
–30
–23
–28
–32
–45
–46
–42
–29
–
TRX8
2690
–40
–32
–21
–26
–30
–43
–44
–39
–27
–
Table 6. ANT to TXx/TRXx Isolation Matrix (1 of 2)
Isolation
“On” Port
Frequency
(MHz)
TX1
TX2
TRX1
TRX2
TRX3
TRX4
TRX5
TRX6
TRX7
TRX8
TX1
915
–
–26
–54
–53
–54
–46
–44
–42
–48
–52
TX1
1910
–
–35
–55
–61
–65
–41
–39
–39
–42
–49
TX1
2170
–
–32
–54
–62
–69
–42
–39
–40
–41
–48
TX1
2690
–
–31
–49
–51
–54
–41
–38
–39
–38
–45
TX2
915
–34
–
–57
–55
–55
–47
–45
–42
–56
–57
TX2
1910
–32
–
–46
–45
–46
–39
–37
–34
–41
–45
TX2
2170
–31
–
–44
–43
–44
–38
–36
–33
–40
–43
TX2
2690
–33
–
–43
–42
–43
–36
–34
–32
–39
–42
TRX1
915
–41
–48
–
–38
–47
–47
–45
–43
–50
–45
TRX1
1910
–49
–38
–
–31
–39
–41
–39
–37
–39
–36
TRX1
2170
–48
–36
–
–31
–38
–39
–38
–36
–37
–35
TRX1
2690
–44
–34
–
–30
–37
–37
–36
–34
–34
–34
TRX2
915
–42
–49
–43
–
–36
–47
–46
–43
–47
–55
TRX2
1910
–48
–38
–35
–
–30
–41
–39
–37
–38
–41
TRX2
2170
–46
–37
–34
–
–29
–40
–38
–36
–36
–40
TRX2
2690
–44
–34
–34
–
–29
–38
–36
–34
–34
–38
TRX3
915
–42
–49
–52
–43
–
–48
–46
–43
–46
–53
TRX3
1910
–47
–39
–40
–34
–
–41
–40
–37
–38
–41
TRX3
2170
–46
–37
–39
–33
–
–40
–38
–36
–36
–39
TRX3
2690
–44
–35
–38
–32
–
–38
–36
–34
–33
–37
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
7
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Table 6. ANT to TXx/TRXx Isolation Matrix (2 of 2)
Isolation
“On” Port
Frequency
(MHz)
TX1
TX2
TRX1
TRX2
TRX3
TRX4
TRX5
TRX6
TRX7
TRX8
TRX4
915
–43
–51
–53
–53
–55
–
–41
–46
–51
–53
TRX4
1910
–47
–40
–47
–46
–47
–
–33
–35
–45
–47
TRX4
2170
–46
–39
–46
–45
–45
–
–31
–34
–44
–45
TRX4
2690
–44
–36
–44
–42
–42
–
–30
–31
–41
–43
TRX5
915
–44
–53
–54
–53
–55
–51
–
–43
–51
–53
TRX5
1910
–47
–41
–47
–46
–48
–36
–
–32
–45
–47
TRX5
2170
–46
–40
–46
–45
–46
–34
–
–31
–44
–46
TRX5
2690
–44
–36
–44
–43
–44
–32
–
–29
–41
–43
TRX6
915
–44
–61
–54
–53
–55
–47
–51
–
–52
–53
TRX6
1910
–48
–47
–47
–46
–48
–37
–36
–
–46
–47
TRX6
2170
–47
–44
–46
–45
–46
–36
–34
–
–44
–46
TRX6
2690
–44
–36
–44
–43
–44
–33
–32
–
–41
–43
TRX7
915
–32
–45
–50
–51
–50
–47
–45
–43
–
–37
TRX7
1910
–49
–37
–40
–39
–40
–40
–39
–37
–
–31
TRX7
2170
–49
–37
–39
–37
–38
–39
–38
–36
–
–30
TRX7
2690
–43
–35
–38
–35
–36
–37
–36
–34
–
–30
TRX8
915
–38
–47
–36
–51
–56
–47
–45
–43
–48
–
TRX8
1910
–51
–38
–30
–39
–41
–40
–39
–37
–35
–
TRX8
2170
–50
–36
–30
–38
–39
–39
–38
–36
–33
–
TRX8
2690
–44
–34
–29
–36
–37
–37
–36
–34
–30
–
Table 7. Insertion Loss Matrix
State
Frequency (MHz)
704
824
915
960
1710
1910
2170
2690
TX1
–1.12
–1.20
–1.37
–1.51
–
–
–
–
TX2
–0.83
–0.87
–0.87
–0.88
–0.96
–1.07
–1.42
–7.47
TRX1
–0.58
–0.60
–0.60
–0.60
–0.60
–0.59
–0.60
–0.93
TRX2
–0.52
–0.54
–0.54
–0.54
–0.56
–0.53
–0.54
–0.86
TRX3
–0.59
–0.62
–0.62
–0.62
–0.64
–0.61
–0.60
–0.89
TRX4
–0.50
–0.52
–0.52
–0.52
–0.57
–0.53
–0.49
–0.68
TRX5
–0.56
–0.58
–0.58
–0.58
–0.59
–0.55
–0.52
–0.79
TRX6
–0.58
–0.60
–0.59
–0.60
–0.59
–0.55
–0.54
–0.93
TRX7
–0.61
–0.63
–0.63
–0.64
–0.66
–0.65
–0.66
–1.00
TRX8
–0.59
–0.61
–0.61
–0.61
–0.61
–0.57
–0.58
–0.94
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Typical Performance Characteristics
(VDD = 2.85 V, VC1 = VC2 = VC3 = VC4 = 0/1.8 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise
Noted)
Figure 3. Insertion Loss vs Frequency
(ANT to All TRX Ports)
Figure 4. Insertion Loss vs Frequency
(ANT to TX1 Port)
Figure 5. Insertion Loss vs Frequency
(ANT to TX2 Port)
Figure 6. Attenuation vs Frequency
(ANT to TX1/2 Ports)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
9
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 7. Isolation vs Frequency
(TX1 to TRX Ports)
Figure 8. Isolation vs Frequency
(GSM_TX_HB to TRX Ports)
Figure 9. Isolation vs Frequency
(TRX1 to TRX4/5/6 Ports)
Figure 10. Isolation vs Frequency
(TRX2 to TRX4/5/6 Ports)
Figure 11. 3rd Order Intermodulation Distortion vs Phase, TRX
Ports (fFUND = 1.95 GHz, fBLK = 1.76 GHz, fRX = 2.14 GHz)
Figure 12. Harmonics vs Phase
(ANT to TX1, PIN = +35 dBm, 5:1 VSWR Mismatch)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 13. Harmonics vs Phase
(ANT to TX2, PIN = +33 dBm, 5:1 VSWR Mismatch)
Figure 14. 3rd Order Intermodulation Test Setup
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
11
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Evaluation Board Description
Package and Handling Information
The SKY13441 Evaluation Board is used to test the performance
of the SKY13441 SP10T Switch. An Evaluation Board schematic
diagram is provided in Figure 15. A recommended ESD protection
circuit diagram is provided in Figure 16. An assembly drawing for
the Evaluation Board is shown in Figure 17.
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
Package Dimensions
The PCB layout footprint for the SKY13441 is provided in
Figure 18. Typical case markings are shown in Figure 19.
Package dimensions for the 20-pin MCM are shown in Figure 20,
and tape and reel dimensions are provided in Figure 21.
THE SKY13441 is rated to Moisture Sensitivity Level 3 (MSL3) at
260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 15. SKY13441 Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 16. SKY13441 Recommended ESD Protection Circuits
Figure 17. SKY13441 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
13
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 18. SKY13441 PCB Layout Footprint
(Top View)
Figure 19. Typical Part Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
14
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 20. SKY13441 20-Pin MCM Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
15
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Figure 21. SKY13441 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
16
February 25, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201828B
DATA SHEET • SKY13441 SP10T SWITCH WITH GPIO INTERFACE
Ordering Information
Model Name
SKY13441 0.4-2.2 GHz SP10T Switch
Manufacturing Part Number
SKY13441
Evaluation Board Part Number
SKY13441-EVB
Copyright © 2012, 2013 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201828B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 25, 2013
17