Data Sheets - Skyworks Solutions, Inc.

data sheet
AS192-000: PHEMT GaAs IC High-Power
SP4T Switch 0.1–2.5 GHz
Features
Simplified Schematic
4 symmetric RF paths
l Positive voltage control
l High IP3
l Excellent harmonic performance
l Handles GSM power levels
l Available in 100% RF tested chip form
l
A vailable lead (Pb)-free, RoHS-compliant, and Green
l
J1
V2
J2
ANT
J3
V3
Description
The AS192-000 is a reflective SP4T switch. It is an ideal switch
for higher power applications. It can be used for GSM dual-band
handset applications where low loss, low current and small size
are critical parameters.
NEW
V1
J4
V4
Skyworks Green™ products are RoHS (Restriction
of Hazardous Substances)-compliant, conform to
the EIA/EICTA/JEITA Joint Industry Guide (JIG)
Level A guidelines, are halogen free according to
IEC-61249-2-21, and contain <1,000 ppm antimony
trioxide in polymeric materials.
Electrical Specifications at 25 °C (0, +4.5 V)
Parameter
Frequency
Min.Typ.
Insertion loss
Ant-J1, J2, J3, J4
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
Isolation
Ant-J1, J2, J3, J4
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
VSWR
0.1–1.0 GHz
1.0–2.5 GHz
30
25
19
18
0.90
0.95
1.00
1.10
Max.
Unit
1.1
1.1
1.2
1.3
dB
dB
dB
dB
34
29
23
21
dB
dB
dB
dB
1.3:1
1.4:1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200144 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 22, 2008
1
Data Sheet • AS192-000
Operating Characteristics at 25 °C (0, +4.5 V)
Parameter
Condition
Frequency
Min.Typ.
Max.
Unit
Switching characteristics
Rise, fall (10/90% or 90/10% RF)
On, off (50% CTL to 90/10% RF)
Video feedthru
50
100
50
ns
ns
mV
IP3
13 dBm/tone
+55
dBm
2nd and 3rd harmonics
34 dBm input 900 MHz
-65
dBc
Control voltage
VHIGHVLOW
Control port current
3
0
5
0.2
V
V
VCTL = 5 V
VCTL = 3 V
VCTL = 2.7 V
VCTL = 0 V
200
200
200
20
µA
µA
µA
µA
0
0
-0.2
-5
-0.4
-10
-0.6
-15
Isolation (dB)
Loss (dB)
Typical Performance Data
-0.8
-1.0
-1.2
-30
-35
-1.6
-40
-1.8
-45
-50
0
0.5
1.0
1.5
2.0
2.5
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
typical Insertion Loss vs. Frequency
typical Isolation vs. Frequency
2.5
Absolute Maximum Ratings
2.5
2.0
VSWR
-25
-1.4
-2.0
Characteristic
RF input power
1.5
1.0
Value
4 W > 0.5 GHz
0/+6 V control
Control voltage
+6 V
Operating temperature
-40 °C to +85 °C
Storage temperature -65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
0.5
0
0
0.5
1.0
1.5
Frequency (GHz)
typical VsWR
2
-20
2.0
2.5
CAUTION: A lthough this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all
times from ESD. Static charges may easily produce
potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
October 22, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200144 Rev. D
Data Sheet • AS192-000
V4Ant-J1Ant-J2Ant-J3Ant-J4
VHigh VLow VLow VLow
Ins. loss
VLow VHigh VLow VLow
VLow VLow VHigh VLow
VLow VLow VLow VHigh
J4
Isolation
Isolation
Isolation
Ins. loss
Isolation
Isolation
Isolation
Isolation
Ins. loss
Isolation
0.0261 (0.66 mm)
V4
Ins. loss
0.0209 (0.53 mm)
ANT
0.0156 (0.40 mm)
V1
Isolation
Isolation
Isolation
0.0030 (0.08 mm)
0.0000 (0.00 mm)
J1
0.0000 (0.00 mm)
0.0031 (0.08 mm)
VLow = 0.
VHigh = 4.5 to 5.0 V for RF power > 30 dBm.
VHigh = 3.0 to 5.0 V for RF power 20–30 dBm.
VHigh = 2.7 to 5.0 V for RF power < 20 dBm.
All other conditions not recommended.
Isolation
0.0417 (1.06 mm)
0.0387 (0.98 mm)
J3
V3
V2
J2
0.0382 (0.97 mm)
V3
0.0351 (0.89 mm)
V2
0.0045 (0.11 mm)
V1
Outline and Pin Out Drawing
0.0337 (0.86 mm)
Truth Table
Chip thickness 0.008 ± 0.001 (0.203 ± 0.025).
Bond pad dimensions: 0.028 (0.07 mm square).
Bond pad metallization: gold.
Backside metallization: none.
Dimensions in inches (mm).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200144 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 22, 2008
3
Data Sheet • AS192-000
Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
4
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
October 22, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200144 Rev. D