AS215-92, AS215-92LF - Skyworks Solutions, Inc.

DATA SHEET
AS215-92, AS215-92LF: Single Positive Control PHEMT
GaAs IC SPDT Switch 0.5–3 GHz
Applications
●
Pin Out
6
5
CBL
Features
GND
Single bias control
Operates with 1.8 V control voltage
● Low DC power consumption
● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
2
J3
1
T/R switch for BluetoothTM and general-purpose
telecommunication applications
VSS
CBL
J1
●
4
J2
3
●
CBL
VCTL
DC blocking capacitors (CBL) must be supplied externally for positive voltage operation.
CBL = 100 pF for operation >500 MHz.
Description
The AS215-92 is a medium-power IC FET SPDT switch in a lowcost, miniature SC-70 6-lead plastic package. The AS215-92
features low insertion loss and positive voltage operation with
very low DC power consumption. This general-purpose switch
can be used in a variety of telecommunications applications.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Electrical Specifications
VS = 3 V, VCTL = 0/3 V, Z0 = 50 Ω, unless otherwise noted
Parameter
Insertion
loss(1)
Frequency
Min.
0.5–1 GHz
1.0–2 GHz
2.0–3 GHz
Isolation
0.5–1 GHz
1.0–2 GHz
2.0–3 GHz
VSWR(2)
0.5–1 GHz
1.0–2 GHz
2.0–3 GHz
25
21
17
Typ.
Max.
Unit
0.75
0.60
0.50
1.0
0.8
0.7
dB
dB
dB
28
24
20
dB
dB
dB
1.1:1
1.4:1
1.2:1
1. Insertion loss changes by 0.003 dB/°C.
2. Insertion loss state.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200196 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 19, 2007
1
DATA SHEET • AS215-92, AS215-92LF
Operating Characteristics at 25 °C
VS = 3 V, VCTL = 0/3 V, Z0 = 50 Ω, unless otherwise noted
Parameter
Switching characteristics
Rise, fall
On, off
Video feedthru
Condition
Frequency
Min.
10/90% or 90/10% RF
50% CTL to 90/10% RF
TRISE = 1 ns, BW = 500 MHz
Input power for 1 dB compression
VCTL = 0/1.8 V
VCTL = 0/3 V
0.5–3 GHz
0.5–3 GHz
Intermodulation intercept point (IP3)
For two-tone input power 5 dBm
VCTL = 0/3 V
0.5–3 GHz
Thermal resistance
Control voltages
Low
High
Control port current
VCTL = low
VCTL = 2.7 V
VCTL = 5 V
Supply voltage
0
1.8
VHIGH
-0.2
Typ.
Max.
10
20
25
ns
ns
mV
20
27
dBm
dBm
40
dBm
25
°C/W
0.2
5.0
V
V
20
100
200
µA
µA
µA
VHIGH
+0.2
V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
Unit
April 20, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200196 Rev. D
DATA SHEET • AS215-92, AS215-92LF
Typical Performance Data
VS = 3 V, VCTL = 0/3 V, Z0 = 50 Ω, unless otherwise noted
0
-10
-15
J1–J2
-0.50
-20
Isolation (dB)
Insertion Loss (dB)
-0.25
-0.75
-1.00
-1.25
J1–J3
-1.50
-25
-30
J1–J3
-35
J1–J2
-40
-1.75
-45
-2.00
-50
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
3.0
2.0
1.9
1.8
1.7
J1–J3
VSWR
1.6
1.5
1.4
J1–J2
1.3
1.2
1.1
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
VSWR vs. Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200196 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 20, 2007
3
DATA SHEET • AS215-92, AS215-92LF
Truth Table
Absolute Maximum Ratings
V1
J1–J2
J1–J3
0
Isolation
Insertion loss
VHIGH
Insertion loss
Isolation
1.8 < VHIGH < 5 V.
VDD = VHIGH ± 0.2 V.
Characteristic
2 W max. > 500 MHz
0/8 V control
Supply voltage
8V
Control voltage
Operating temperature
SC-70 6 Lead (SC-88)
Storage temperature
0.079 (2.00 mm)
± 0.008 (0.20 mm)
0.0256 (0.65 mm)
BSC
0.087 (2.20 mm)
± 0.008 (0.20 mm)
0.049 (1.25 mm)
± 0.004 (0.10 mm)
0.009 (0.23 mm)
Ref
Pin 1 Indicator
0.035 (0.90 mm)
± 0.004 (0.10 mm)
0.010 (0.25 mm)
± 0.006 (0.15 mm)
0.0055
(0.14 mm)
± 0.0015
(0.04 mm)
0.002 (0.005 mm)
± 0.002 (0.005 mm) 0.037 (0.95 mm)
± 0.006 (0.15 mm)
Value
RF input power
-0.2 V, +8 V
-40 °C to +85 °C
-65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
0.008 (0.20 mm)
± 0.004 (0.10 mm)
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
April 20, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200196 Rev. D
DATA SHEET • AS215-92, AS215-92LF
Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200196 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 20, 2007
5