CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media FEATURES · 100 mbar to 35 bar, 1.5 to 500 psi gage1 or absolute10 pressure · 0...10 V, 0.5...4.5 V, 0...5 V, 1...6 V or 4...20 mA output · Field interchangeable · All welded stainless steel diaphragm construction · EMC according to EN 61326-18 MEDIA COMPATIBILITY Wetted materials: Stainless steel 1.4404 (316L)9 Housing: Stainless steel 1.4404 (316L), protection class IP 67 (according to DIN EN 60529) respectively NEMA 61 ELECTRICAL CONNECTION SPECIFICATIONS11,12 Maximum ratings Voltage output device Supply voltage (reverse polarity protection) CTE(M)/CTU9...0 12...32 V CTE(M)/CTU9...1 9...32 V CTE(M)/CTU9...6, ...7 8...32 V CTE(M)/CTU9...42 7...32 V Maximum load current (source) CTE(M)/CTU9...0, ...1, ...6, ...7 Proof pressure3 +Vs +Vs 1 sensor Vout Vout 2 -Vs -Vs V 4 1 mA case 2 x rated pressure 3 Environmental Current output device Temperature limits Storage Operating (media) Electronic (ambient) Compensated -40...85 °C -40...85 °C -40...85 °C 0...50 °C Vibration (5 to 500 Hz) 10 gRMS Mechanical shock 50 g +Vs +Vs 1 N/C sensor 2 V -Vs RL -Vs 4 case 3 E / 11509 / D 1/6 www.first-sensor.com www.sensortechnics.com CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media COMMON PERFORMANCE CHARACTERISTICS (VS=15 V ±0.1 V, TA=25 °C, RH=50 %) Characteristics Thermal effects (0...50 °C)4 Offset Span Thermal effects (-20...0 °C, 50...70 °C)4 Offset Span Non-linearity (BSL) and hysteresis Min. Typ. Max. 100 mbar/1.5 psi devices ±0.04 ±0.08 all others ±0.02 ±0.05 100 mbar/1.5 psi devices ±0.04 ±0.08 all others ±0.02 ±0.05 100 mbar/1.5 psi devices ±0.04 all others ±0.02 100 mbar/1.5 psi devices ±0.04 all others ±0.02 5 ±0.1 Repeatability Long term stability ±0.1 Output noise (0 < f < 1 kHz) ±0.1 Response time (10 to 90 %) 5 D/A resolution Power supply rejection %FSO/°C ±0.3 ±0.1 6 Unit %FSO ms 11 Offset ±0.01 Span ±0.02 bi t %FSO/V INDIVIDUAL PERFORMANCE CHARACTERISTICS (VS=15 V ±0.1 V, TA=25 °C, RH=50 %) 0...10 V output (RL > 100 kΩ) Characteristics Zero pressure offset CT...9N... Min. Typ. Max. 4.9 5 5.1 all others Full scale span7 0 0.1 CT...9N... 4.9 5 5.1 all others 9.9 10 10.1 Output impedance 25 Current consumption (no load) 4 Unit V Ω mA 0.5...4.5 V output (RL > 100 kΩ) Characteristics Zero pressure offset 7 Full scale span Min. Typ. Max. CT...9N... 2.45 2.5 2.55 all others 0.45 0.5 0.55 CT...9N... 1.95 2 2.05 all others 3.95 4 4.05 Output impedance Current consumption (no load) E / 11509 / D 25 4 Unit V Ω mA 2/6 www.first-sensor.com www.sensortechnics.com CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media INDIVIDUAL PERFORMANCE CHARACTERISTICS (cont.) (VS=15 V ±0.1 V, TA=25 °C, RH=50 %) 0...5 V output (RL > 100 kΩ) Characteristics Zero pressure offset Min. Typ. 2.45 2.5 2.55 0 0.05 CT...9N... all others Full scale span7 Max. CT...9N... 2.45 2.5 2.55 all others 4.95 5.0 5.05 Output impedance 25 Current consumption (no load) 4 Unit V Ω mA 1...6 V output (RL > 100 kΩ) Characteristics Zero pressure offset Full scale span7 Min. Typ. Max. CT...9N... 3.45 3.5 3.55 all others 0.95 1 1.05 CT...9N... 2.45 2.5 2.55 all others 4.95 5.0 5.05 Output impedance 25 Current consumption (no load) 4 Unit V Ω mA 4...20 mA output (RL = 100 Ω) Characteristics Zero pressure offset 7 Full scale span Min. Typ. Max. CT...9N... 11.8 12.0 12.2 all others 3.8 4.0 4.2 CT...9N... 7.8 8.0 8.2 all others 15.8 16.0 16.2 Power consumption (IL = 20 mA) 250 Unit mA mW LOAD LIMITATION 4...20 mA output version 1400 Ohm 1200 1000 800 op e ra ratin ng g e 600 400 200 0 E / 11509 / D 5 7 10 16 20 25 30 32 V supply voltage 3/6 www.first-sensor.com www.sensortechnics.com CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media OUTLINE DRAWING NOM 85.0 (3.35) 65.0 (2.56) vent hole¹ 4 G 1/8" (BSP) 1 3 M12 x 1 21.8 (0.86) diam. 6.5 (0.26) Detail A 2 4.0 (0.16) diam. 9.2 (0.36) Detail A 14.8 (0.58) Output Pin 1 2 3 4 Voltage Current +Vs Vout C a se -Vs +Vs N/C C a se -Vs O-ring grove 1.4 (0.055) Note: O-ring included in delivery mass: 82 g dimensions in mm (inches) RECOMMENDED ACCESSORY (not included in delivery) ZP000112-B: ZK000101-x: Mating Connector (without cable) Connector/cable assembly (x=cable lenghts in m, max. 10 m) x = length in m (max. 10 m) 36.5 NOM 60 Shield Flying lead end 1 Brown 2 Green 3 White and shield 4 Yellow Vent tube M12x1 Ø 20 E / 11509 / D PIN CONNECTION Pin Note: For proper function of all gage devices the vent tube must have access to the ambient atmosphere. dimensions in mm 4/6 www.first-sensor.com www.sensortechnics.com CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media OPTIONAL PRESSURE FITTINGS (brass, nickel plated) B Male fittings C A D E B 8 (0.315) 12 (0.472) 11.5 (0.453) 16 (0.630) 12.5 (0.492) 8.5 (0.335) 12.5 (0.492) 10 (0.394) 14 (0.551) C 13 (0.512) 5.5 (0.217) 5 (0.197) 7 (0.276) 11 (0.433) 5 (0.197) 7 (0.276) 13 (0.512) 6 (0.236) H Dimensions in mm (inches) Dimensions in mm (inches) A 1/8" BSPT 1/4" BSPT 3/8" BSPT 1/2" BSPT 1/8" BSP 1/4" BSP 3/8" BSP 1/8" NPT 1/4" NPT G F Female fittings D (Hex.) 14 (9/16") 14 (9/18") 17 (11/16") 22 (7/8") 14 (9/16") 19 (3/4") 22 (7/8") 17 (11/16") 22 (7/8") E 1/8" BSP 1/4" BSP 3/8" BSP 1/2" BSP F 5 (0.197) 7 (0.276) 6 (0.236) 18 (0.707) G 15 (0.591) 20 (0.787) 20 (0.787) 23 (0.906) H (Hex.) 14 (9/16") 17 (11/16") 22 (7/8") 24 (15/16") Specification notes: 1. IP 64 protection is given when the connector is locked. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects are relative to 25 °C. Signal is clamped at 0 V. 5. Non-linearity refers to Best Straight Line fit. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. 6. Long term stability over 1 year. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Surge immunity according to EN 61000-4-5 on request for current output devices. 9. When using devices with optional nickel plated fittings, consider the media compatibility of the fittings also. 10. Available for pressure ranges from 1 bar (15 psi) absolute upwards only. 11. CE-labelling is in accordance with 2004/108/EC. 12. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. E / 11509 / D 5/6 www.first-sensor.com www.sensortechnics.com CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media ORDERING INFORMATION CTx (M) 9xxx Calibration E: bar calibration U: psi calibration x x Output signal 0: 0...10 V 1: 1...6 V 4: 4...20 mA 6: 0.5...4.5 V 7: 0...5 V For mbar ranges only Pressure range CTE9000 series 100: 0...100 mbar 200: 0...200 mbar 350: 0...350 mbar 001: 0...1 bar N01: -1...+1 bar P01: 0...-1 bar 002: 0...2 bar 003: 0...3 bar 005: 0...5 bar 010: 0...10 bar 016: 0...16 bar 020: 0...20 bar 035: 0...35 bar x CTU9000 series 1x5: 0...1.5 psi 003: 0...3 psi 005: 0...5 psi 015: 0...15 psi N15: -15...15 psi P15: 0...-15 psi 030: 0...30 psi 050: 0...50 psi 100: 0...100 psi 300: 0...300 psi 500: 0...500 psi Pressure mode G: gage pressure1 A: absolute pressure (from 1 bar/15 psi only) Pressure connection Standard thread Y: G 1/8" (BSP) male, SS 1.4404 (316L) Optional pressure fittings D: 1/8" BSPT male, brass, nickel plated E: 1/4" BSPT male, brass, nickel plated F: 3/8" BSPT male, brass, nickel plated G: 1/2" BSPT male, brass, nickel plated K: 1/8" NPT male, brass L: 1/4" NPT male, brass M: 1/8" NPT male, SS 1.4305 (303) N: 1/4" NPT male, SS 1.4305 (303) P: G 1/8" (BSP) male, brass, nickel plated Q: G 1/4" (BSP) male, brass, nickel plated R: G 3/8" (BSP) male, brass, nickel plated S: G 1/2" (BSP) male, brass, nickel plated U: G 1/8" (BSP) female, brass, nickel plated V: G 1/4" (BSP) female, brass, nickel plated W: G 3/8" (BSP) female, brass, nickel plated X: G 1/2" (BSP) female, brass, nickel plated Other pressure ranges and options are widely available. Please contact First Sensor. First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11509 / D 6/6 www.first-sensor.com www.sensortechnics.com