X-Valve® 8 mm switching solenoid valves FEATURES · 2-way or 3-way, 2 position valve (NO, NC & Distributor) · Compact size, only 8 mm in width · Meets pressure requirements including 6, 30 & 100 psi · Excellent leakage specification for over 25 million cycles · Ensures high reliability with its single piece body design · Barbed pressure ports allow for direct tubing or manifold assemblies · Non-elastomeric versions with enhanced media compatibility available on request · RoHS compliant MEDIA COMPATIBILITY PHYSICAL PROPERTIES Non-reactive gases Operating environment Storage temperature WETTED MATERIALS Bobbin/Body PBT (polybutylene terephthalate) Pole and plunger 430 FR series stainless steel Seal (options) Other 302 series stainless steel Power X1..., X6... (6 psi) all other (30 psi, 100 psi) Electrical connections -40 to 70 °C Length 24 mm (0.92 in) Width 7.9 mm (0.31 in) Height 9.5 mm (0.375 in) Spacing 8 mm (centerline) FKM, EPDM, silicone ELECTRICAL Voltage 0 to 50 °C Porting Universal barbs for 1/16 in I.D. tubing (1/32 in wall max.); manifold mount with X-seal Weight 4.5 g (0.16 oz) 0.5 W 1.0 W 3, 5, 12, 24 VDC PC pins, 4 mm centers Internal volume 0.092 cm3 (0.0056 in3) X-Valve is a registered trademark of Parker Hannifin Corporation. E / 11250 / B 1/4 www.first-sensor.com www.sensortechnics.com X-Valve® 8 mm switching solenoid valves PERFORMANCE CHARACTERISTICS Part no. Pressure4 Minimum flow Orifice siz es/ Equivalent CV1 Leak rate2 X1..., X6... 0...6 psid 4 lpm @ 6 psid 0.045 in (1.143 mm)/ 0.018 CV ≤0.16 sccm (FKM, EPDM), ≤0.016 sccm (silicone) X2..., X7... 0...30 psid 6 lpm @ 30 psid 0.030 in (0.76 mm)/ 0.010 CV ≤0.016 sccm X5..., X8... 0...100 psid 9 lpm @ 100 psid 0.020 in (0.51 mm)/ 0.005 CV ≤0.2 sccm R esp o n se <20 ms cycling FLOW CURVES (typ. air flow @ 24 °C)3 CONNECTION DIAGRAM Notes: 1. The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2. sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3. slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. 4. Proof pressure is 200 psig (13.7 bar) E / 11250 / B 2/4 www.first-sensor.com www.sensortechnics.com X-Valve® 8 mm switching solenoid valves ELECTRICAL CONNECTION Short pin Long pin dimensions in inches (mm) Electrical terminals compatible with Molex 51065 series connector or equivalent. OUTLINE DRAWING Side view Bottom view dimensions in inches (mm) Manifold mount diagram dimensions in inches (mm) E / 11250 / B 3/4 www.first-sensor.com www.sensortechnics.com X-Valve® 8 mm switching solenoid valves ORDERING INFORMATION Model no. Series Pressure Orifice Options X 1 6 psi 0.045 in (1.143 mm) 2 30 psi 0.030 in (0.762 mm) 5 100 psi 0.020 in C oi l wattage Voltage Type 6 psi 0.045 in (1.143 mm) 7* 30 psi 0.030 in (0.762 mm) 8* 100 psi 0.020 in (0.510 mm) Elastomer 03 3 VDC S Short pin F FK M B Screw & gasket 1 W 3-way, universal 05 5 VDC L Long pin E EPD M 0 No accessories 1 W 3-way, NC 12 12 V D C 0.5 W 2-way, NC, bidirectional (6 psi only) S Silicone (6 psi only) 24 24 V D C 1 W 2-way, NC, bidirectional 1 W 2-way, NC, bidirectional * 2 way NC configurations only available in FKM. Port 3 internally blocked. Example: X Optional accessories* 0.5 W 3-way, universal (0.510 mm) 6* Electical connection 1 * accessory field not printed on valve 05 L F B Note: Not all combinations might be available. Non-elastomeric versions with enhanced media compatibility are available on request. Please contact First Sensor for further information. Accessories (please order separately using the following order numbers) Order No. Description ZK071248 Clear transparent polyurethane tubing, ID 1/16 in (1.6 mm), OD 1/8 in (3.2 mm) X-RETAINING CLIP Solder clip for mounting X-CONNECTOR 12 in (30.5 cm) leads with connector First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11250 / B 4/4 www.first-sensor.com www.sensortechnics.com