Current Sense Transformers and Inductors

nt
SECTION 7
Mains 50/60Hz Current Transformers •
Primary Current Ratings to 200 Amps •
20kHz to 200kHz Current Sense Inductors and Transformers •
Fully RoHS Compliant •
magnetics
nuvotem
Current Sense Transformers and Inductors
Sales & Marketing, Design and Manufacturing Facilities
http://www.talema-nuvotem.com
Eastern Europe &
Czech Republic
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: talema@talema.cz
Web Site: www.ntmagnetics.cz
Germany
Ireland
India
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: info@talema.de
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: info@nuvotem.com
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: talema@talemaindia.com
Web Site: www.talemaindia.com
THE TALEMA GROUP • Magnetic Components for Universal Applications
Current Sense Transformers and Inductors
TALEMA PROFILE
Founded in 1975, The TALEMA International Group has
established itself as a world leader in the manufacture of
toroidal transformers and related magnetic components.
Our strong technical engineering expertise has contributed
to the growth of our current workforce to over 1,200
employees in manufacturing locations in the Czech
Republic and India.
Over the years The Talema Group has succeeded in
designing, producing and delivering in excess of 50 million
transformers to its customers. The recent incorporation
of xDSL technology into our extensive range of Telecom
and LAN magnetics offerings, such as ISDN, 10Base-T,
Ethernet transformers for 100/1000Base-T, has
broadened our market offering to an even higher level.
QUALITY
The TALEMA Group has a total commitment to quality
and employs Lean Six Sigma training for engineering,
production and administrative staff to help achieve a goal
of zero defects. All facilities maintain very stringent
Quality Control and Quality Assurance procedurees and
are certified to and manufacture in accordance with ISO9001:2000, TS-16949:2002 and meet a broad range of
International Standards including UL, VDE, IEC, and
EN.
Performance has been proven in the many design in’s
of our products. The fact that we maintain a ship-tostock vendor rating with over 200 national and
international companies is, to us, the best testimonial of
our commitment to quality.
ENVIRONMENT
All TALEMA International Group
manufacturing facilities are RoHS
compliant and all chokes, inductors
and HF components are produced in
an Environment Management System
(EMS) facility certified to ISO-14001:2004.
CONTENTS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ASM Series - For mains frequencies of 50/60Hz wirh primary current ratings from 1 to 100 Amps
AS Series - Designed for frequencies from 20kHz to 200kHz, Primary rating to 30 Amps
AC Series - Chart for 50/60Hz current sensors with primary current ratings from 0.5 to 200 Amps
AC1005 - 50/60Hz, primary current to 5 Amps nominal, 60 Amps max.
AC1010 - 50/60Hz, primary current to 10 Amps nominal, 60 Amps max.
AC1015 - 50/60Hz, primary current to 15 Amps nominal, 60 Amps max.
AC1020 - 50/60Hz, primary current to 20 Amps nominal, 60 Amps max.
AC1025 - 50/60Hz, primary current to 25 Amps nominal, 75 Amps max.
AC1030 - 50/60Hz, primary current to 30 Amps nominal, 75 Amps max.
AC1040 - 50/60Hz, primary current to 40 Amps nominal, 125 Amps max.
AC1050 - 50/60Hz, primary current to 50 Amps nominal, 125 Amps max.
AC1060 - 50/60Hz, primary current to 60 Amps nominal, 200 Amps max.
AC1075 - 50/60Hz, primary current to 75 Amps nominal, 200 Amps max.
AC1100 - 50/60Hz, primary current to 100 Amps nominal, 250 Amps max.
AC1150 - 50/60Hz, primary current to 150 Amps nominal, 500 Amps max.
AC1200 - 50/60Hz, primary current to 200 Amps nominal, 500 Amps max.
Page Nr.
- 3
- 4-5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
•
Authorized TALEMA Sales Offices and Representatives
-
21
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
2
06/06
ASM Series • 50/60 Hz Current Sensor
ASM Series current sensors operate as the sealed secondary of a current transformer while the conductor
carrying the current to be measured functions as a one turn primary. Measurement accuracy can be
improved by increasing the number of primary turns. Applications include detection of branch circuit
overload and load drop or shutdown.
• Competitive pricing due to high volume
production
• Manufactured in an ISO-9001:2000,
TS-16949:2002 and ISO-14001:2004
certified Talema facility
• Fully RoHS compliant
Features
• Fully encapsulated for optimal PC board mtg.
• Mains frequency of 50/60 Hz
• Primary current ratings from 1 to 100 Amps
• Primary to secondary isolated to 2500 VAC
• Operating temperature range: -40° C to +120°C
Typical Response
ASM-010
Current
R an g e
Output Voltage
Tolerance
ASM-010
ASM-020
ASM-030
ASM-050
ASM-075
ASM-100
1 - 10 Amps
1 - 20 Amps
1 - 30 Amps
5 - 50Amps
5 - 75 Amps
5 - 100 Amps
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
17.0
(0.669)
0.60 Ø
(0.024)
9.53
(0.375)
ASM-020
ASM-010
Ø 5.0
(0.197)
20.4
(0.803)
TALEMA
ASM-010
1
40
3
4 .0 (0.157)
12.7
(0.500)
1
35
Output Voltage (mV)
Part
Number
3
30
25
20
15
10
5
17.20
(0.677)
Ø 5.0
(0.197)
0
1 2
4
6
8
10
12
Current (Amps)
25.0
(0.984)
ASM-010 & ASM-020
ASM-020
80
E
3.5
(0.138)
1
15.5
4
(0.610)
12.5
(0.492)
8
5
Output
Voltage
(mV)
50 ohms
23.0
(0.906)
Note: Pins #1 and 8 are Blank
Output Voltage (mV)
20.0
(0.787)
0.60x0.88 mm
(0.024x0.035)
70
60
50
40
30
20
10
0
ASM-030
1 2 4 6 8 10 12 14 16 18 20 22 24
Current (Amps)
Ø 9.27
(0.365)
25.4
(1.00)
0.80 Ø
(0.031)
5.0 (0.197)
1
3
1
2
3
2
15.24
(0.600)
11.18
(0.440)
70
Output Voltage (mV)
TALEMA
ASM-030
220 ohms
7.62
(0.301)
Output
Voltage
(mV)
3
1
2
25.15
(0.99)
ASM-030
80
E
60
50
40
30
20
10
0
1.78
(0.070)
1 5
10 15
Note: Pin #3 is Blank
ASM-050, ASM-075 & ASM-100
17.5
(0.689)
3.5
(0.138)
7
135
8
E
27.5
(1.085)
32.0
(1.260)
35.0
(1.378)
30 35 40
ASM-050, ASM-075 & ASM-100
0.75 x 1.10 mm
(0.030 x 0.043)
7.50
(0.295)
3
4
1
2
20.5
(0.807)
1
2
220 ohms
Output
Voltage
(mV)
Output Voltage (mV)
Ø 8.0
(0.315)
20 25
Current (Amps)
120
105
90
75
60
45
30
15
0
5
20
40
60
80
100
Current (Amps)
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
3
AS Series • Current Sense Inductors & Transformers
AS Series Current Sensors are designed as a low cost method of
controlling, monitoring or measuring AC currents. The sensors serve as
feedback elements between the output and pulse control circuitry providing
accurate regulation of switch mode power supplies.
Features
• Fully encapsulated for optimal PC board mounting
• Frequency range from 20kHz to 200kHz
• Primary current rating to 30 Amps
• Primary to secondary isolated to 2500 VAC
• Meets VDE norms
• Optimum performance over designated current and
frequency range
• Competitive pricing due to high volume production
• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified facility
• Fully RoHS compliant
Applications
Isolated current feed-back signal in Switch Mode Power Supplies • Motor current load/overload • Lighting • Switch Controls Ultra-sound current
• High resolution sonar current • Isolated bi-directional current sensor with full wave bridge rectifier
Electrical Specifications at 25°C
Part Number
Prim./Sec.
Ratio
(1)
L sec
(mH Min)
DCR sec
(Ohms Max.)
Sec. Term. (2)
Resistance
(Ohms Nom.)
(3)
I sec
Max.
Volt µS
Max.
AS-100
AS-101
AS-102
AS-103
AS-104
AS-105
AS-110
AS-111
AS-112
AS-113
AS-114
AS-115
1:50
1:100
1:200
1:300
1:500
1:750
1:50CT
1:100CT
1:200CT
1:300CT
1:500CT
1:750CT
5
22
89
200
560
1260
5
22
89
200
560
1260
0.6
1.1
4.5
10.0
25.0
43.0
0.3 / 0.3
0.55 / 0.55
2.25 / 2.25
5.0 / 5.0
12.5 / 12.5
21.5 / 21.5
50
100
200
300
500
750
25 + 25
50 + 50
100 + 100
150 + 150
250 + 250
375 + 375
300mA
150mA
75mA
50mA
30mA
40mA
300mA
150mA
75mA
50mA
30mA
40mA
175
350
700
900
1500
3750
175
350
700
900
1500
3750
(4)
Schematic
1
3
1
2
3
Notes:
1)
Lsec: Secondary inductance tested at 10kHz and 10mV for 1:50 through 1:500
2)
This nominal termination resistance value will yield approximately 1.0V
17.2
Prim./Sec. ratios and 1kHz/10mV for Prim./Sec. ratio of 1:750
5.0
17.0
20.4
of output for each amp of current in a single turn sense line. The output
TALEMA
ASXXX
1
2
3
Voltage/Ampere of these devices can be increased or decreased linearly
over a restricted temperature range by adjusting the terminating resistance.
3)
0.45 x 0.66
4 .0
For Prim./Sec. Ratios of 1:50 through 1:500, the Isec value corresponds to a
6.35
(0.250)
maximum primary current of 15 Amp-turns rms while the Isec value for the ratio of
4)
12.7
1:750 corresponds to a max. primary current of 30 Amp-turns rms.
1
VµS = R t x Is x 2F
Rt (Ohms): Recommended Terminating Resistance
Is (A): Secondary Current
+
9.53
2
+
F (Hz): Frequency
5)
1
3
_
_
Operating Temperature Range: -40°C to +120°C
Primary Sense Current
6) Pin 2 is on Center-Tapped (CT) versions only
THE TALEMA GROUP
•
World Wide Toroidal Specialists
(08-15) AS Series
AS Series • Current -Sense Inductors & Transformers
Electrical Specifications at 25°C
Part Number
Prim./Sec.
Ratio
Lsec (1)
(mHMin.)
D C R sec
(Ohms Max.)
Sec. Term. (2)
Resistance
(Ohms Nom.)
Isec (3)
Max.
Volt µS (4)
Max.
Type 1
Type 2
AS-200
AS-300
1:50
5
0.65
50
300mA
175
AS-201
AS-301
1:100
20
1.30
100
150mA
350
AS-202
AS-302
1:200
80
4.50
200
75mA
700
AS-210
AS-310
1:50CT
5
0.65
25 + 25
300mA
175
AS-211
AS-311
1:100CT
20
1.30
50 + 50
150mA
350
AS-212
AS-312
1:200CT
80
4.50
100 + 100
75mA
700
AS-320
1:50
5
0.65
50
300mA
175
AS-321
1:100
20
1.30
100
150mA
350
AS-322
1:200
80
4.50
200
75mA
700
AS-330
1:50CT
5
0.65
25 + 25
300mA
175
AS-331
1:100CT
20
1.30
50 + 50
150mA
350
AS-332
1:200CT
80
4.50
100 + 100
75mA
700
Type 1
14.50
(0.571)
10.15
(0.400)
3
4
1
17.8
(0.700)
12.7
(0.500)
4.0
(0.157)
5
15.25
(0.600)
3
Pins 1 & 2
Ø 1.30 (0.051)
19.60
(0.772)
Features
• Meets requirements of IEC 950 and VDE norms
UL94, VO recognized materials
• Operating frequency range from 20kHz to 200kHz
Electrical Specifications at 25°C
Pri./Sec.
Ratio
AS-400
1:100
1
350
Switching
AS-401
AS-402
1:100
1:100
2
5
550
1500
Switching
Switching
AS-403
1:100
10
1500
Switching
1:100
1:500
1:500
1:500
50
50
65
80
1500
2700
4200
7500
4
3
1
4
2
5
1
2
6
7
3
5
1
2
6
7
3
4
5
C ase
Type
Schematic
6
7
1
2
Pins 3, 4 &5
Ø 0.80 (0.032)
•
Dimensions
C
D
E
F
G
H
I
Hole
A
17.8
12.8
20.0
10.0
5.0
15.0
5.0
--
2
8
A
B
23.0
32.5
15.5
18.0
25.0
35.5
12.5
15.0
10.0
12.5
20.0
--
5.0
--
---
1
2
3
4
7
A
32.0
20.5
35.0
17.5
12.5
27.5
7.5
--
B
A
A
B
32.5
23.0
27.0
32.5
18.0
15.5
18.0
18.0
35.5
25.0
30.0
35.5
15.0
12.5
15.0
15.0
12.5
10.0
12.5
12.5
-20.0
22.5
--
-5.0
5.0
--
Ø8
Ø5
Ø5
Ø8
8
7
8
Type B
3.5 ±0.3
5.0 ±0.3
7
8
3
4
H
G
I
0.60 x 0.88 mm
(AS-403 0.75 x 1.10)
Pins 1, 2, 6 & 7
Ø 1.30 (0.051)
22.9
17.8
(0.700) (0.902)
7
1
Switching
Switching
Switching
Switching
C
4.0
(0.157)
5
Type A
E
5
• Operating Temperature Range: -40°C to +120°C
• Primary to secondary isolated to 4000 VAC
• Primary current rating to 80 Amps
Volt µS
Application
(Max.)
Part
Number
AS-404
AS-405
AS-406
AS-407
2
17.8
(0.700)
6.35
(0.250)
12.7
(0.500)
Pins 3, 4 &5
Ø 1.00 (0.039)
2
IP
Amps
3
1
Type 2
18.0
(0.709)
5.08
(0.200)
Schematic
1
C
1
2
7
8
G
2
F
D
0.60 x 0.88 mm
E
F
D
1 & 2 Blind Pins for
AS-404 & AS-407
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
AC Series • Current Transformer Quick Reference Guide
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Features
• Excellent quality at extremely competetive price due to high
volume production
• Manufactured in an ISO-9001:2000, TS-16949:2002 and
ISO-14001:2004 certified Talema facility
• Fully RoHS compliant
Electrical Specifications @ 20°C ambient
AC Series • Standard Accuracy Current Transformers
Part No.
A C 1005
IP
Amps
Turns
Ratio
5
1000:1
Terminating
Resistor
Ohms
Watt
100
0.0025
DCR
(Ohms)
RCF
Volts/Amp @ rated IP
for various loads (Ohms)
Nominal @ 10%
41.80
1.010
Iex
Vex
N et
Weight
Case Dimensions - mm
100
500
2K
5K
L
ID
0.10
0.46
1.43
2.01
μArms Vrms (grams)
237
0.66
16.3
23.80
9.50
23.80 11.12 15.24 7.62
H
W
C
D
23.80 11.12 15.24 7.62
A C 1010
10
1000:1
100
0.0100
41.80
1.010
0.10
0.45
1.10
1.42
386
1.32
16.3
23.80
9.50
A C 1015
15
1000:1
100
0.0230
41.80
1.010
0.10
0.45
0.90
1.12
513
1.99
16.3
23.80
9.50
23.80 11.12 15.24 7.62
A C 1020
20
1000:1
100
0.0400
41.80
1.010
0.10
0.43
0.76
0.93
628
2.65
16.3
23.80
9.50
23.80 11.12 15.24 7.62
A C 1025
25
1000:1
100
0.0630
48.00
10.20
0.10
0.47
1.06
1.31
566
3.65
35.5
30.20 11.40 30.20 14.30 20.32 10.16
A C 1030
30
1000:1
100
0.0900
48.00
1.020
0.10
0.47
0.95
1.16
644
4.38
35.5
30.20 11.40 30.20 14.30 20.32 10.16
A C 1040
40
1000:1
100
0.1600
49.3
1.026
0.10
0.46
0.87
1.05
914
5.82
47.3
34.90 14.60 34.90 14.30 25.40 10.16
A C 1050
50
1000:1
100
0.2500
49.3
1.026
0.10
0.43
0.76
0.90
1090
7.28
47.3
34.90 14.60 34.90 14.30 25.40 10.16
A C 1060
60
1000:1
100
0.3600
24.00
1.001
0.10
0.44
0.66
0.76
1250
7.41
65.2
38.10 14.60 38.10 15.90 33.00 10.16
A C 1075
75
1000:1
100
0.5700
24.00
1.001
0.10
0.39
0.57
0.65
1520
9.26
65.2
38.10 14.60 38.10 15.90 33.00 10.16
AC1100
100
1000:1
100
1.0000
21.30
1.001
0.10
0.34
0.50
0.56
1740
12.00
80.0
44.50 19.05 44.50 14.30 35.56 10.16
AC1150
150
1000:1
100
2.2500
11.00
1.002
0.10
0.37
0.50
0.55
1820
16.60
150.0
55.60 23.80 55.60 20.60 45.72 12.70
A C 1200
200
1000:1
100
4.0000
11.00
1.002
0.10
0.31
0.41
0.45
2340
22.20
150.0
55.60 23.80 55.60 20.60 45.72 12.70
IP : Primary Current
RL: Terminating Resistor
RCF: Ratio correction factor - Multiply current readings by this factor to
compensate for transformer losses.
Dimensions
Notes:
1) Unless requested, the terminating resistor and the one-turn primary
are not supplied
2) Pin 3: Normally for mechanical support only but will be used on
center tapped designs
3) Each part number adjusted to be most accurate at specified load.
W
L
H
TALEMA INDIA
W/Y
AC1xxx
5±1mm
ID min.
2
3
IP
1
C
D
IS
1
I - Turn
Primary
Terminal Diameter:
AC1005 - AC1020 - Ø 0.813
AC1025 - AC1200 - Ø 1.016
3
RL VL
2
Sales & Marketing, Design and Manufacturing Facilities
http://www.talema-nuvotem.com
Eastern Europe &
Czech Republic
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: talema@talema.cz
Web Site: www.ntmagnetics.cz
Germany
Ireland
India
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: info@talema.de
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: info@nuvotem.com
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: talema@talemaindia.com
Web Site: www.talemaindia.com
THE TALEMA GROUP
6
•
World Wide Toroidal Specialists
AC1005
• 5 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
Turns Ratio
Volt per Amp Ratio at 5A for 100 ohm load
Volt per Amp Ratio at 0.5A for 100 ohm load
DC Resistance at 20°C
Dielectric Withstanding Voltage (Hi-pot)
5A nom., 60A max.
1000:1 nominal
0.100 V/A
0.096 V/A
41.8 ohms
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
C a se
Encapsulant
Flammibility
Terminals
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 0.80mm
Marking
TALEMA
Date Code (W/Y)
AC1005, Dot at start pin
10000
16.3 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
10
1000
100
Infinity
10K
5K
10
0
2K
100
1K
1
200
300
400
Percent ratio error in %
500
200
50
100
Typical Excitation Curve
(AC1005~AC1020)
100
0.1
0.01
1
10
100
Input Current in Amps
Dimensions
11.12
23.80
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1005)
Load Resistance RL in ohms
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10
1
0.1
0.01
0.1
1
10
100
1000
23.80
Sec RMS Exciting current in mA
TALEMA INDIA
W/Y
AC1005
5±1mm
Ø9.50
2
3
15.24
1
Ø 0.813
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
1
1.75
7.62
I - Turn
Primary
5A
5mA
RL
0.5V
1/8W
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
7
AC1010
• 10 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E le c tric al S p e c ific atio n s
Pri mary C urrent
Turns Rati o
Volt per Amp Rati o at 10A for 100 ohm load
Volt per Amp Rati o at 1A for 100 ohm load
D C Resi stance at 20°C
D i electri c Wi thstandi ng Voltage (Hi -pot)
10A nom., 60 A max.
1000:1 nomi nal
0.100 V/A
0.097 V/A
41.8 ohms
4KVrms
Mechanical Specifications
C a se
Encapsulant
Flammi bi li ty
Termi nals
E n viro n me n tal S p e c ific atio n s
Polycarbonate
Epoxy
C onforms to UL94-VO
Pi ns Ø 0.80mm
Storage Temperature
Insulati on Resi stance
%RE vs RL at Rated primary current
(AC1010)
TALEMA
D ate C ode (W/Y)
1010, D ot at start pi n
Marki ng
10000
16.3 grams
±0.2mm
Load Resistance RL in ohms
Approxi mate Wei ght
Tolerance
Output Volts vs Input Current
For various ohmic loads
10
1000
100
10
Infinity
10K
5K
0
2K
100
200
1K
1
300
400
500
200
Typical Excitation Curve
(AC1005~AC1020)
50
100
100
0.1
0.01
1
10
100
Input Current in Amps
Dimensions
11.12
23.80
10
1
0.1
0.01
0.1
1
10
100
23.80
Sec RMS Exciting current in mA
TALEMA INDIA
W/Y
AC1010
5±1mm
Ø9.50
2
3
15.24
1
Ø 0.813
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
1
1.75
7.62
I - Turn
Primary
10A
10mA
RL
2
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
8
600
Percent ratio error in %
500
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
-55° to +130°C
100 megohms mi n.
1.0V
1/8W
100 ohms
1000
AC1015
• 15 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
15A nom., 60 A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 15A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 1.5A for 100 ohm load
0.097 V/A
DC Resistance at 20°C
41.8 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
C a se
Encapsulant
Flammibility
Terminals
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 0.80mm
Marking
TALEMA
Date Code (W/Y)
AC1015, Dot at start pin
10000
16.3 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
10
Infinity
10K
5K
1000
100
10
2K
0
200
1K
1
400
600
800
Percent ratio error in %
500
200
50
100
Typical Excitation Curve
(AC1005~AC1020)
100
0.1
0.01
1
10
100
Input Current in Amps
Dimensions
11.12
23.80
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1015)
Load Resistance in ohms
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10
1
0.1
0.01
0.1
1
10
100
1000
23.80
Sec RMS Exciting current in mA
TALEMA INDIA
W/Y
AC1015
5±1mm
Ø9.50
2
3
15.24
1
Ø 0.813
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
1
1.75
7.62
I - Turn
Primary
15A
15mA
RL
1.5V
1/8W
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
9
AC1020
• 20 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
Turns Ratio
Volt per Amp Ratio at 20A for 100 ohm load
Volt per Amp Ratio at 2A for 100 ohm load
DC Resistance at 20°C
Dielectric Withstanding Voltage (Hi-pot)
20A nom., 60 A max.
1000:1 nominal
0.100 V/A
0.097 V/A
41.8 ohms
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 0.80mm
Marking
TALEMA
Date Code (W/Y)
AC1020, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
16.3 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
1000
100
10
10
0
Infinity
10K
5K
200
400
600
800
1000
100
1000
Percent ratio error in %
2K
500
1K
1
200
Typical Excitation Curve
(AC1005~AC1020)
50
100
100
0.1
0.01
1
10
100
Input Current in Amps
Dimensions
11.12
23.80
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1020)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
0.01
0.1
1
10
23.80
Sec RMS Exciting current in mA
TALEMA INDIA
W/Y
AC1020
5±1mm
Ø9.50
2
3
15.24
1
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
Ø 0.813
1
1.75
7.62
I - Turn
Primary
20A
20mA
2
THE TALEMA GROUP • Magnetic Components for Universal Applications
10
RL
1/8W
2.0V
100 ohms
AC1025
• 25 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
Turns Ratio
Volt per Amp Ratio at 25A for 100 ohm load
Volt per Amp Ratio at 2.5A for 100 ohm load
DC Resistance at 20°C
Dielectric Withstanding Voltage (Hi-pot)
25A nom., 75A max.
1000:1 nominal
0.100 V/A
0.098 V/A
48 ohms
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1025, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
35.5 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
100
100
10
0
100
200
500
100
200
100
50
0.1
1
10
Input Current in Amps
100
Dimensions
14.30
30.20
400
500
600
Typical Excitation Curve
(AC1025~AC1030)
1K
1
300
Percent ratio error in %
2K
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
Infinity
1000
10K
5K
10
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1025)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
0.01
0.1
1
10
100
30.20
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1025
5±1mm
Ø11.40
2
3
20.32
1
Ø 0.813
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
2.08
1
10.16
I - Turn
Primary
25A
3
25mA
RL
1/8W
2.5V
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
11
AC1030
• 30 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
Turns Ratio
Volt per Amp Ratio at 30A for 100 ohm load
Volt per Amp Ratio at 3A for 100 ohm load
DC Resistance at 20°C
Dielectric Withstanding Voltage (Hi-pot)
30A nom., 75A max.
1000:1 nominal
0.100 V/A
0.098 V/A
48 ohms
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1030, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
35.5 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
100
100
10
0
100
500
100
200
100
50
0.1
1
10
Input Current in Amps
100
Dimensions
14.30
30.20
300
400
500
600
10
1
0.1
0.01
0.1
1
10
30.20
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1030
5±1mm
Ø11.40
2
3
20.32
1
Ø 1.016
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
2.08
1
10.16
I - Turn
Primary
30A
3
30mA
2
THE TALEMA GROUP • Magnetic Components for Universal Applications
12
700
Typical Excitation Curve
(AC1025~AC1030)
1K
1
200
Percent ratio error in %
2K
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
Infinity
1000
10K
5K
10
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1030)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
RL
1/8W
3.0V
100 ohms
100
AC1040 • 40 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
40A nom., 125A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 40A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 4A for 100 ohm load
0.098 V/A
DC Resistance at 20°C
49.3 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1040, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
47.3 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
100
1000
100
10
0
200
1K
10
400
600
800
Percent ratio error in %
2K
Typical Excitation Curve
(AC1040~AC1050)
500
100
200
100
1
50
0.1
10
100
Input Current in Amps
Dimensions
10
1
0.1
14.30
34.90
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
Infinity
10K
5K
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1040)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
0.01
0.1
1
10
34.90
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1040
5±1mm
Ø14.60
2
3
25.40
1
Ø 1.016
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
2.08
1
10.16
I - Turn
Primary
40A
3
40mA
RL
1/4W
4.0V
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
13
AC1050
• 50 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
50A nom., 125A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 50A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 5A for 100 ohm load
0.098 V/A
DC Resistance at 20°C
49.3 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1050, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
47.3 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
100
1000
100
10
0
2K
200
400
10
600
800
1000
Percent ratio error in %
1K
Typical Excitation Curve
(AC1040~AC1050)
500
200
100
100
1
50
0.1
10
100
Input Current in Amps
Dimensions
14.30
34.90
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
Infinity
10K
5K
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1050)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
0.01
0.1
1
10
34.90
Sec RMS Exciting Current in mA
5±1mm
Ø14.60
2
3
25.40
1
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
TALEMA INDIA
W/Y
AC1050
Ø 1.016
2.08
1
I - Turn
Primary
10.16
50A
3
50mA
2
THE TALEMA GROUP
14
•
World Wide Toroidal Specialists
RL
1/4W
5.0V
100 ohms
AC1060 • 60 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
60A nom., 200A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 60A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 6A for 100 ohm load
0.0984 V/A
DC Resistance at 20°C
24 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1060, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
65.2 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
100
1000
100
10
-200
0
200
400
600
800
1000
1200
Percent ratio error in %
2K
1K
10
Typical Excitation Curve
(AC1060~AC1075)
500
100
200
100
1
50
0.1
10
100
Input Current in Amps
Dimensions
15.90
38.10
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
Infinity
10K
5K
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1060)
10000
Load resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
0.01
0.1
1
10
38.10
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1060
5±1mm
Ø14.60
2
3
33.00
1
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
Ø 1.016
1
2.85
10.16
I - Turn
Primary
60A
3
60mA
RL
1/2W
6.0V
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
15
AC1075
• 75 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
75A nom., 200A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 75A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 7.5A for 100 ohm load
0.0984 V/A
DC Resistance at 20°C
24 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1075, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
65.2 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
Infinity
10K
1000
100
10
5K 2K
-200
0
200
100
200
100
50
1
100
Input Current in Amps
1000
Dimensions
15.90
38.10
600
800
1000
1200
1400
Typical Excitation Curve
(AC1060~AC1075)
500
10
10
400
Percent ratio error in %
1K
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1075)
10000
Load resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
0.01
0.1
1
10
38.10
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1075
5±1mm
Ø14.60
2
3
33.00
1
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
Ø 1.016
1
2.85
10.16
I - Turn
Primary
75A
3
75mA
2
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
16
RL
1W
7.5V
100 ohms
AC1100 • 100 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
100A nom., 250A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 100A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 10A for 100 ohm load
0.0986 V/A
DC Resistance at 20°C
21.3 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1100, Dot at start pin
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
10000
80 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
5K 2K
1K
1000
100
10
500
0
200
400
600
800
1000
1200
1400
1600
Percent ratio error in %
10
Typical Excitation Curve
(AC1100)
200
100
100
50
1
10
100
Input Current in Amps
Dimensions
14.30
44.50
1000
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
100
Infinity
10K
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1100)
Load Resistance RL in ohms
C a se
Encapsulant
Flammibility
Terminals
10
1
0.1
44.50
0.01
TALEMA INDIA
W/Y
AC1100
5±1mm
Ø19.05
2
3
35.56
1
0.1
1
10
100
Sec RMS Exciting Current in mA
Ø 1.016
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
1
2.07
10.16
I - Turn
Primary 100A
3
100mA
RL
1W
10V
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
17
AC1150
• 150 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
150A nom., 500A max.
Turns Ratio
1000:1 nominal
Volt per Amp Ratio at 150A for 100 ohm load
0.100 V/A
Volt per Amp Ratio at 15A for 100 ohm load
0.0990 V/A
DC Resistance at 20°C
11 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
C a se
Encapsulant
Flammibility
Terminals
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1150, Dot at start pin
10000
150 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
1000
1000
100
10
0
100
Infinit
10K
5K
500
200
100
50
1
100
Input Current in Amps
1000
Dimensions
20.60
55.60
2000
10
100
Typical Excitation Curve
(AC1150~AC1200)
500
10
1500
2K
1K
10
1000
Percent ratio error in %
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1150)
Load Resistance RL in ohms
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
100
10
1
0.1
0.01
0.1
1
55.60
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1150
5±1mm
Ø23.80
2
3
45.72
1
Ø 1.016
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
1
3.95
12.70
I - Turn
Primary 150A
3
150mA
2
THE TALEMA GROUP • Magnetic Components for Universal Applications
18
RL
5W
15V
100 ohms
AC1200
• 200 Amp Current Transformer
Low Cost 50/60Hz Current Transformers
Applications
• Sensing Overload Current
• Ground fault detection
• Metering
• Analog to Digital Circuits
Electrical Specifications @ 20°C ambient
E lectrical S p ecificatio n s
Primary Current
200A nom., 500A max.
Turns Ratio
1000:1 nominal
loVd
aolt per Amp Ratio at 200A for 100 ohm
0.100 V/A
Volt per Amp Ratio at 20A for 100 ohm load
0.0991 V/A
DC Resistance at 20°C
11 ohms
Dielectric Withstanding Voltage (Hi-pot)
4KVrms
Mechanical Specifications
E n viro n men tal S p ecificatio n s
C a se
Encapsulant
Flammibility
Terminals
Polycarbonate
Epoxy
Conforms to UL94-VO
Pins Ø 1.0mm
Marking
TALEMA
Date Code (W/Y)
AC1200, Dot at start pin
150 grams
±0.2mm
Output Volts vs Input Current
For various ohmic loads
1000
100
10
0
100
1000
1500
2000
2500
2K
1K
500
10
Typical Excitation Curve
(AC1150~AC1200)
200
100
50
1
10
100
Input Current in Amps
1000
Dimensions
20.60
55.60
100
10
1
0.1
55.60
0.01
3
45.72
1
0.1
1
10
100
Sec RMS Exciting Current in mA
TALEMA INDIA
W/Y
AC1200
5±1mm
Ø23.80
2
500
Percent ratio error in %
Infinit
10K
5K
Sec RMS Exciting Voltage in Volts
Output Voltage in Volts
1000
-55° to +130°C
100 megohms min.
%RE vs RL at Rated primary current
(AC1200)
10000
Load Resistance RL in ohms
Approximate Weight
Tolerance
Storage Temperature
Insulation Resistance
Ø 1.016
Notes:
1) Unless requested, the terminating resistor and the one-turn
primary are not supplied
2) Pin 3: Normally for mechanical support only but will be
used on center tapped designs
3.95
1
12.70
I - Turn
Primary 200A
3
200mA
RL
5W
20V
100 ohms
2
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
19
Notes
Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325
http://www.talema-nuvotem.com
20
Authorised Talema Sales Representatives and Distributors
Sales Representatives
Germany
Australia
France
PLZ 1, 4,5, 6, 8 & 9
TORTECH PTY. LTD.
POB 194
North Strathfield,
Sydney, N.S.W. 2137
Tel: Int. + 61 2 9642 6003
Fax: Int. + 61 2 9642 6127
E-Mail: tortech@ozemail.com.au
Web Site: www.tortech.com.au
E.S.I.A
5-7 Place Marcel Rebuffat
Courtaboeuf 7 Villejust
91971 Courtaboeuf Cedex
Tel: Int. + 33 1 6931 4410
Fax: Int. + 33 1 6931 4425
E-Mail: esia@wanadoo.fr
Web Site: www.esia.fr
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 841 00 - 0
Fax: Int. + 49 89 841 00 25
Email: info@talema.de
PLZ 2 & 3 (less 35 & 36)
Benelux
H. J. MERCK & Co. GmbH
Hasenhöhe 128
22587 Hamburg
Tel: Int. + 49 40 87 08 63-0
Fax: Int. + 49 40 87 08 63-33
E-mail: info@hj-merck.de
ISATRONICK B.V.B.A.
Doolhoflaan 17
B-2640 Mortsel
Tel: Int. + 32 3 448 1976
Fax: Int. + 32 3 448 1195
E-Mail: info@isatronick.be
Web Site: www.isatronick.be
PLZ 7
BERND BIELER
Industrievertretung
Max-Eyth-Straße 1
72379 Hechingen
Tel: Int. + 49 7471 1804-0
Fax: Int. + 49 7471 1804-10
E-mail: bieler@bernd-bieler.de
Denmark & Sweden
UK
DELTA COMPONENTS LTD.
The Courtyard
Seven Acres, Smallfield Road
Horne, Surrey RH6 9JP
Tel: Int. + 44 1342 844 555
Fax: Int. + 44 1342 844 552
sales@deltacomponents.com
www.deltacomponents.com
USA
Spain
H. F. Transformers, Chokes &
Inductors
OTTO RATING S.A.
Castellnou, 31-33
08017 Barcelona
Tel: Int.+34 93 252 2708
Fax: Int.+34 93 205 6264
E-mail: Info@rating.es
Web Site: www.rating.es
Switzerland
NORDTEK DANMARK
Horsensvej 134
DK-8300 Odder
Tel: Int. + 45 86 554 344
Fax: Int. + 45 86 554 644
E-Mail: post@nordtek.dk
Web Site: www.nordtek.dk
BTB COMPONENTS AG
Im Chlösterli 4
CH-8902 Urdorf
Tel: Int. + 41 44 734 4888
Fax: Int. + 41 44 734 4892
E-mail: info@btbcomponents.ch
Austria
Italy
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 841 00 - 0
Fax: Int. + 49 89 841 00 25
Email: info@talema.de
TECHNOLASA ELETTRONICA
Via Macello, 65/B
I-39100 Bolzano
Tel: Int. + 39 0471 305 400
Fax: Int. + 39 0471 305 444
E-Mail: sales@technolasa.com
ALFAMAG ELECTRONICS LLC
945 Parkwood
PO Box 668
Rolla, Missouri 65402
Tel: Int.+573 364 2422
Fax: Int.+573 364 5390
E-Mail: sales@alfamag.com
Web Site: www.alfamag.com
50/60 Hz Toroidal Transformers
AMVECO MAGNETICS, INC.
11222 Richmond Ave., Suite 120
Houston, TX 77042
E-Mail: sales@amveco.com
Web Site: www.amveco.com
Distributors
Germany
BÜRKLIN OHG MÜNCHEN
Schillerstr. 41
80336 München
Tel:
Int.+49 89 558 75-0
Fax:
Int.+49 89 558 75-421
E-Mail: info@buerklin.de
Web: www.buerklin.com
SCHUKAT ELECTRONIC
VERTRIEBS GMBH
Daimlerstraße 26
40789 Monheim
Tel:
Int.+49 2173 9505
Fax:
Int.+49 2173 950999
Web: www.schukat.com
BÜRKLIN OHG DÜSSELDORF
Hoherweg 245
40231 Düsselforf
Tel:
Int.+49 211 9067-0
Fax:
Int.+49 211 9067-125
E-Mail: info@buerklin.de
Web: www.buerklin.com
RUTRONIK ELEKTRONISCHE
BAULEMENTE GMBH
Industriestraße 2
75228 Ispringen/Pforzheim
Tel:
Int.+49 7231 801-0
Fax:
Int.+49 7231 82282
E-Mail: rutronik@rutronik.com
Web: www.rutronik.com
Italy
Switzerland
RUTRONIK ITALIA S.r.i
21, Via Caldera
Centro Direzionale S.Siro
20153 Milano
Tel:
Int.+39 02 40951 1
Fax:
Int.+39 02 40951 224
E-Mail: MI@rutronik.com
Web: www.rutronik.com
RUTRONIK ELEKTRONISCHE
BAUELEMENTE AG
Hölzliwisenstraße 5
CH-8604 Volketswil
Tel: Int.+41 44 947 3737
Fax: Int.+41 44 947 3747
E-Mail: rutronik_ch@rutronik.com
UK
RS COMPONENTS LTD.
Birchington Road
Corby
Northants, NN17 9RS
Tel: Int.+44 8457 201201
Fax: Int.+44 845 850 9911
www.rs-components.com
Sales & Marketing, Design and Manufacturing Facilities
http://www.talema-nuvotem.com
Eastern Europe &
Czech Republic
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: talema@talema.cz
Web Site: www.ntmagnetics.cz
Germany
Ireland
India
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: info@talema.de
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: info@nuvotem.com
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: talema@talemaindia.com
Web Site: www.talemaindia.com
THE TALEMA GROUP • Magnetic Components for Universal Applications
nt
magnetics
nuvotem
Summary
TOTAL PROGRAM
SECTION1
• TOROIDAL 50/60Hz TRANSFORMERS
SECTION 2
• TOROIDAL PCB TRANSFORMERS
SECTION 3
• ELEVEN GOOD REASONS TO SELECT
TALEMA TOROIDAL TRANSFORMERS
SECTION 4
• CHOKES, INDUCTORS AND TRANSFORMERS
FOR POWER APPLICATIONS
SECTION 5
• COMPONENTS FOR TELECOMMUNICATIONS
AND DATA LINE TECHNOLOGY
SECTION 6
• CURRENT COMPENSATED EMI NOISE
SUPPRESSION CHOKES
SECTION 7
• CURRENT SENSE TRANSFORMERS
I NDUCTORS
SECTION 8
• LAN MAGNETIC COMPONENTS
ETHERNET APPLICATIONS
AND
FOR
SECTION 9
• TI/E1/CEPT-PRI - T3/DS3/E3/STS-1 FOR
TELECOMMUNICATION PRODUCTS
SECTION 10
• U INTERFACE TRANSFORMERS FOR
COMMUNICATIONS AND DATA LINE
TECHNOLOGY
SECTION 11
• TRANSFORMERS FOR BROADBAND Access
AND FIBRE CHANNEL INTERFACE
.
THE TALEMA
THE TALEMA
GROUP GROUP
• Magnetic
• Components
Worldwide Toroidal
for Universal
Specialists
Applications