ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensures compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatibility • excellent and consistent balance between windings • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • meets lead free reflow level J-STD-020C • fully RoHS compliant • operating temperature: -40° to +85°C • storage temperature: -40° to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Miniature Chip SMD Modules comply w ith EN60950, UL1950 and UL1459 Part Number LP Turns LL CC RCUP RCUS (mH Min) Ratio (µH Max) (pF Max) (Ohms) (Ohms) 25 1:1:1: 1 5 50 2.6 2.7 MMJ-100B-501 Quad Choke (per winding) VP RCU (Ohms) L 0.30 500µH Schematic (Vrms) 1500 B Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series Standard Packaging: Tape and Reel Schematic TALEMA IN WK/YR Part Number 0.350 (8.89) 0.453 (11.50) 0.256 (6.50) 5 0.079 (2.00) 7 3 8 1 0.350 (8.89) 10 11 15 16 13 6 IC 9 12 4 0.394 (10.60) 0° - 8° 0.051 (1.31) Line 0.030 (0.75) 0.050 (1.27) 0.378 0.346 (9.60) (8.80) B Suggested Pad Layout MMJ Miniature Module 2 14 0.216 (5.50) Pins: 0.016 x 0.016 (0.40 x 0.40) Surface Coplanarity will be 0.004 (0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications (08-06) Communications\ISDN\MMJ Packing and Dimensions E± 0.1 Dimensions for carrier tape (Unit : mm) P2 ± 0.1 A P0 ± 0.1 + 0 .1 -0 .0 D1 B0 ± 0.1 W± 0.3 F± 0.15 D0 A0± 0 .1 P± 0.1 A Dimensions are in mm Dimensions in mm R eel Siz e Type MMJ W F E P2 P0 D0 24.00 11.50 1.75 2.00 4.00 Ø1.5 D1 P Ø1.50 16.00 A0 B0 T K0 10.20 12.05 0.35 7.05 330x24 Quantity Quantity (Pcs/Reel) (Reel/Cased) 600 5/3000 M /Y TALEM A IN MM J-10 0B -50 1 M /Y TALEM A IN MM J-10 0B -50 1 M /Y TALEM A IN Blank MM J-10 0B -50 1 Reel dimensions Blank Pcs Min. 400mm Min. 160mm Drawing direction Reel Dimensions in mm Type A B C N 330 x 24 330 24 20.2 100 Outer Carton Inner Carton 335 355 50 5 35 0 33 285 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com