MX573BBA312M500 Ultra-low Jitter 312.5MHz LVPECL XO ClockWorks™ FUSION General Description Features The MX573BBA312M500 is an ultra-low phase jitter XO with LVPECL output optimized for high line rate applications. • 312.5MHz LVPECL • Typical phase noise: -80fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability • -40°C to +85°C temperature range • Industry standard 6-Pin 7mm x 5mm LGA package Applications • 10/40/400 Gigabit Ethernet • Fibre Channel 10G/12G SERDES Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+3.6V Lead Temperature (soldering, 10s)..............................260°C Storage Temperature (TS).............................................125°C ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40°C to +85°C Electrical Characteristics VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 50 Ohms to VDD - 2.¹ Symbol Parameter IDD Supply Current F0 Center Frequency Condition Min. Typ. Max. Units 120 mA 312.5 Frequency Stability Note 2 Øj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time 300 Duty Cycle 45 MHz ±50 175 80 ppm fsRMS 20 ms ps 55 % VOH Output High Voltage LVPECL output levels VDD - 1.35 VDD - 1.01 VDD - 0.8 V VOL Output Low Voltage LVPECL output levels VDD - 2.0 VDD - 1.78 VDD - 1.6 V Vswing Peak to Peak Output Voltage Swing 0.65 0.77 0.95 V Notes: 1. Guaranteed after thermal equilibrium. 2. Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40°C to +85°C. ClockWorks is a registered trademark of Micrel, Inc Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com April 07, 2014 MX573BB1-1840 Revision 1.0 [email protected] or (408) 955-1690 Micrel, Inc. MX573BBA312M500 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX573BBA312M500 MX573BB A312M500 Tube 6-Pin 7mm x 5mm LGA MX573BBA312M500 TR MX573BB A312M500 Tape and Reel 6-Pin 7mm x 5mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR April 07, 2014 MX573BB1-1840 Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up Make no connection, leave floating. Power Supply Ground LVPECL Clock Output Frequency = 312.5MHz Power Supply 2 Revision 1.0 [email protected] or (408) 955-1690 Micrel, Inc. MX573BBA312M500 Package Information and Recommended Land Pattern for 6-Pin LGA³ 6-Pin LGA (7x5mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.micrel.com. MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel's terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. © 2014 Micrel, Incorporated. April 07, 2014 MX573BB1-1840 3 Revision 1.0 [email protected] or (408) 955-1690