YFZVFH2.4B : Diodes

Zener Diode
Datasheet
YFZVFH series
Application
AEC-Q101 Qualified
Land size figure (Unit : mm)
Dimensions (Unit : mm)
Voltage regulation
1.1
0.17 0.10
0.05
2.0
1.40  0.10
0~
0.10
3) By chip-mouter,
automatic mouting is possible.
0.80  0.05
0.20
0.60
0.10
0.8 0.5
2.50  0.20
2) High reliability
N6
1) Small power mold type (TUMD2M)
2.00  0.10
Features
TUMD2M
Cathode
 Structure
ROHM : TUMD2M
Construction
dot (year week factory)  day
EX. YFZVFH3.6B
Silicon epitaxial planar
Taping dimensions (Unit : mm)
0.25±0.05
8.0±0.2
2.75
1.43±0.05
4.0±0.1
1.0
 0.2
φ1.0±0.2
0
2.8±0.05
1.55
 0.1
φ1.55±0.1
0
1.75±0.1
2.0±0.05
3.5±0.05
4.0±0.1
Anode
0.9±0.08
Absolute maximum ratings (Ta = 25°C)
Parameter
Symbol
Limits
Unit
Power dissipation ()
P
500
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
55 to 150
°C
Operating temperature
Topr
55 to 150
°C
() Device mounted on glass-epoxy board(50×50mm, t=1.6mm) Solder land (10×10mm)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/6
2015.05 - Rev.B
Data Sheet
YFZVFH series
Electrical characteristics (Ta= 25°C)
Symbol
Dynamic Impedance : Reverse current
:
Zener voltage : VZ(V)
TYP.
ZZ()
IR(A)
IZ(mA)
VR(V)
IZ(mA)
MAX.
MAX.
MIN.
MAX.
0.5
YFZV 2.0B
2.020
2.200
20
140
20
120
0.7
YFZV 2.2B
2.220
2.410
20
120
20
120
2.430
2.630
1.0
YFZV 2.4B
20
100
20
120
2.690
2.910
1.0
YFZV 2.7B
20
100
20
100
3.010
3.220
1.0
YFZV 3.0B
20
80
20
50
3.320
3.530
1.0
YFZV 3.3B
20
70
20
20
3.600
3.845
1.0
YFZV 3.6B
20
60
20
10
3.890
4.160
1.0
YFZV 3.9B
20
50
20
5
4.170
4.430
1.0
YFZV 4.3B
20
40
20
5
4.550
4.800
1.0
YFZV 4.7B
20
25
20
5
4.940
5.200
1.5
YFZV 5.1B
20
20
20
5
5.450
5.730
2.5
YFZV 5.6B
20
13
20
5
5.960
6.270
3.0
YFZV 6.2B
20
10
20
5
6.490
6.830
3.5
YFZV 6.8B
20
8
20
2
7.070
7.450
4.0
YFZV 7.5B
20
8
20
0.5
7.780
8.190
5.0
YFZV 8.2B
20
8
20
0.5
8.570
9.010
6.0
YFZV 9.1B
20
8
20
0.5
9.410
9.900
7.0
YFZV 10B
20
8
20
0.2
10.500
11.050
8.0
YFZV 11B
10
10
10
0.2
11.440
12.030
9.0
YFZV 12B
10
12
10
0.2
12.550
13.210
10
YFZV 13B
10
14
10
0.2
13.890
14.620
11
YFZV 15B
10
16
10
0.2
15.250
16.040
12
YFZV 16B
10
18
10
0.2
16.820
17.700
13
YFZV 18B
10
23
10
0.2
18.630
19.590
15
YFZV 20B
10
28
10
0.2
20.640
21.710
17
YFZV 22B
5
30
5
0.2
22.610
23.770
19
YFZV 24B
5
35
5
0.2
24.970
26.260
21
YFZV 27B
5
45
5
0.2
27.700
29.130
23
YFZV 30B
5
55
5
0.2
30.320
31.880
25
YFZV 33B
5
65
5
0.2
32.790
34.490
27
YFZV 36B
5
75
5
0.2
35.360
37.190
30
YFZV 39B
5
85
5
0.2
(1) The zener voltage(VZ) is measured 40ms after power is supplied.
(2) The Dynamic Impedance(ZZ) are measured by superimposing a minute alternating current
on the regulated current(IZ)
MARKING (TYPE NO.)
TYPE
YFZV 2.0B
YFZV 2.2B
YFZV 2.4B
YFZV 2.7B
YFZV 3.0B
YFZV 3.3B
YFZV 3.6B
YFZV 3.9B
YFZV 4.3B
YFZV 4.7B
YFZV 5.1B
YFZV 5.6B
YFZV 6.2B
YFZV 6.8B
YFZV 7.5B
YFZV 8.2B
TYPE NO.
N1
N4
N5
N3
N4
N5
N6
N7
N8
N9
NA
NB
NC
ND
NE
NF
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TYPE
YFZV 9.1B
YFZV 10B
YFZV 11B
YFZV 12B
YFZV 13B
YFZV 15B
YFZV 16B
YFZV 18B
YFZV 20B
YFZV 22B
YFZV 24B
YFZV 27B
YFZV 30B
YFZV 33B
YFZV 36B
YFZV 39B
2/6
TYPE NO.
NG
NH
NJ
NK
NL
NM
NN
NP
NQ
NR
NS
NT
NU
NV
NW
NX
2015.05 - Rev.B
Data Sheet
YFZVFH series
Electrical characteristic curves
100
3.6 3.9 4.7
5.6
4.3 5.1
6.2
3.3
3.0
6.8
7.5 8.2 9.1 10 11 12
13
15
2.7
2.4
10
2.2
16
18
20
22
24
27
30
33
36
39
ZENER CURRENT : IZ(mA)
2.0
1
0.1
0.01
0.001
0
5
10
15
20
25
30
35
40
ZENER VOLTAGE : VZ(V)
VZ -IZ CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
3/6
2015.05 - Rev.B
Data Sheet
YFZVFH series
Electrical characteristic curves
10000
500
REVERS SURGE MAXIMUM
POWER : PRSM(W)
POWER DISPERSION : Pd(mW)
600
400
300
200
100
0
0
50
100
150
t
1pulse
100
10
1
0.001
200
0.01
0.1
1
10
TIME : t(ms)
PRSM-TIME CHARACTERISTICS
AMBIENT TEMPERATURE : Ta(°C)
Pd-Ta CHARACTERISTICS
0.08
35
%/°C
0.06
30
0.04
25
0.02
20
mV/°C
0
15
-0.02
10
-0.04
5
-0.06
0
-0.08
-5
TEMP.COEFFICIENCE : Z(mV/°C)
40
0.1
TEMP.COEFFICIENCE : Z(%/°C)
PRSM
1000
-10
-0.1
0
5
10
15
20
25
30
35
40
ZENER VOLTAGE : VZ(V)
Z -VZ CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
4/6
2015.05 - Rev.B
Data Sheet
YFZVFH2.4B
Electrical Characteristic Curves
1000
10
REVERSE CURRENT : IR(A)
ZENER CURRENT : IZ(mA)
100
Ta = 125°C
Ta = 75°C
1
Ta = 25°C
0.1
Ta = 25°C
0.01
100
10
1
Ta = 125°C
0.1
0.01
Ta = 75°C
0.001
Ta = 25°C
0.0001
0.001
0
0.5
1
1.5
2
2.5
0
3
ZENER VOLTAGE : VZ(V)
VZ -IZ CHARACTERISTICS
0.2
0.4
0.6
0.8
1.2
1.4
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
2.8
1000
Ta=25°C
IZ=20mA
n=30pcs
ZENER VOLTAGE : VZ(V)
f = 1MHz
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
1
100
10
2.7
2.6
AVE. : 2.532V
2.5
2.4
2.3
2.2
0
0.2
0.4
0.6
0.8
1
1.2
1.4
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VZ DISPERSION MAP
5/6
2015.05 - Rev.B
Data Sheet
YFZVFH2.4B
Electrical Characteristic Curves
500
Ta=25°C
VR=1.0V
n=30pcs
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
REVERSE CURRENT : IR(A)
30
25
AVE. : 20.823A
20
15
10
Ta=25°C
f=1MHz
VR=0V
n=10pcs
490
480
AVE. : 468.30pF
470
460
450
IR DISPERSION MAP
Ct DISPERSION MAP
DYNAMIC IMPEDANCE : ZZ()
10000
1000
100
10
1
0.1
1
10
ZENER CURRENT : IZ(mA)
ZZ -IZ CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
6/6
2015.05 - Rev.B
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A