Part Number: XZFMDK07A2 Features Package Schematics

Part Number: XZFMDK07A2
SURFACE MOUNT DISPLAY
Features
Package Schematics
● 0.3 inch digit height
● Robust package
● Low power consumption
● Standard configuration: Gray face w/ white
segments
● Standard Package: 300pcs/ Reel
● MSL (Moisture Sensitivity Level): 2a
● RoHS Compliant
MDK
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
Absolute Maximum Ratings
(TA=25°C)
MDK
(AlGaInP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
Power Dissipation
PD
75
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
185
mA
mW
°C
Operating Characteristics
(TA=25°C)
XZFMDK07A2
Emitting
Color
Red
Emitting
Material
AlGaInP
Unit
Forward Voltage (Typ.)
(IF=10mA)
VF
1.85
V
Forward Voltage (Max.)
(IF=10mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=10mA)
λP
645*
nm
Wavelength of Dominant
Emission CIE127-2007* (Typ.)
(IF=10mA)
λD
630*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
△λ
28
nm
C
35
pF
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
MDK
(AlGaInP)
Luminous Intensity
CIE127-2007*
(IF=10mA) ucd
min.
typ.
14000
3600*
26990
6390*
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Jan 07,2014
Wavelength
CIE127-2007*
nm λP
Description
645*
Common Anode,
Rt.Hand Decimal.
XDSA9175
V8-X
Layout: Maggie L.
P. 1/4
Part Number: XZFMDK07A2
SURFACE MOUNT DISPLAY
 MDK
LED is recommended for reflow soldering and
soldering profile is shown below.
Jan 07,2014
XDSA9175
V8-X
Layout: Maggie L.
P. 2/4
Part Number: XZFMDK07A2
SURFACE MOUNT DISPLAY
 Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15)
 Tape Specification (Units : mm)
 Reel Dimension
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the
typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Jan 07,2014
XDSA9175
V8-X
Layout: Maggie L.
P. 3/4
Part Number: XZFMDK07A2
SURFACE MOUNT DISPLAY
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp
Jan 07,2014
XDSA9175
V8-X
Layout: Maggie L.
P. 4/4