XZMR46W-9 Part Number: www.SunLED.com SUBMINIATURE SOLID STATE LAMP Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. Absolute maximum ratings (TA=25°C)) MR (GaAlAs) Unit Reverse voltage VR 5 V Forward current IF 30 mA Forward current (peak) 1/10Duty cycle 0.1ms pulse width iFS 155 mA Power dissipation PT 100 mW Operating temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage temperature Part Number XZMR46W-9 Emitting Color Red Published Date : JAN 30,2004 Emitting Material GaAlAs Operating Characteristics (TA=25°C)) Lens-color Water Clear Drawing No : XDSA1772 Unit Forward voltage (typ.) (IF=20mA) VF 1.85 V Forward voltage (max.) (IF=20mA) VF 2.5 V Reverse current (VR=5V) IR 10 uA λ peak 660 nm Wavelength at Dominate emission (IF=20mA) λD 640 nm Spectral Line half-width (IF=20mA) ∆λ 20 nm Capacitance (VF=0V, f=1MHz) C 45 pF Wavelength at peak emission (IF=20mA) °C MR (GaAlAs) Luminous Intensity (IF=20mA) mcd min. typ. 110 595 V4 Wavelength nm λP Viewing Angle 2 θ 1/2 660 20° Checked : B.L.LIU P.1/3 Part Number: www.SunLED.com XZMR46W-9 SUBMINIATURE SOLID STATE LAMP MR Published Date : JAN 30,2004 Drawing No : XDSA1772 V4 Checked : B.L.LIU P.2/3 Part Number: www.SunLED.com XZMR46W-9 SUBMINIATURE SOLID STATE LAMP SMT Reflow Soldering Instructions Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specification (Units : mm) Published Date : JAN 30,2004 Drawing No : XDSA1772 V4 Checked : B.L.LIU P.3/3