No Maintenance ProcessCost Advantaged Ordering Information E3X-HD E3X-HD Series SERIES NEW Amplifier Units of a Button Type Easy For Communications Unit connection 1 Threshold setting Appearance Cable length Slave connector Without workpiece 2m 4 Threshold setting ( Set to intermediate value between the incident levels with and without a workpiece. With workpiece Without workpiece 9600 100 ) Settings are simultaneously completed. 9999 1600 Optimum setting With workpiece Without workpiece Presence E3X-HD44 Slave connector E3X-CN12 Master connector E3X-CN11 There is no master/slave distinction for the Amplifiers. Along with the Amplifier, purchase the Connectors that are required for applications. Model XS3F-M421-402-A Surprisingly Stable Detection with Your Finger tip Exceptionally easy operation and stabilizing technology reduce maintenance cost. XS3F-M422-402-A Appearance Applicable Fiber Amplifier Units Model E3X-HD0 E3X-MDA0 E3X-DA0-S E3X-CRT E3X-HD11 E3X-HD6 E3X-HD14 PNP output E3X-HD41 E3X-HD8 E3X-HD44 Item Connection method Pre-wired Wire-saving connector M8 connector Smart Eco Drive Contribute to energy saving of equipment The increased power efficiency of the newly developed GIGA RAY and the new circuit design reduce power consumption by 25% over conventional models. This supports saving energy and power in your equipment. Power consumption of only 720 mW has been realized in operation in Normal Mode. And there are no restrictions to sensing distance and response time. E3X-HD0 Communications Unit connector Light source (wavelength) Red, 4-element LED (625 nm) Power supply voltage 12 to 24 VDC ±10%, ripple (p-p)10% max. Power consumption Nomal Mode: 720mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC) Eco ON: 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC) Eco LO: 640 mW max. (Current consumption 26 mA max. at 24 VDC, 53 mA max. at 12 VDC) Control output Load power supply voltage: 26.4 VDC max., open-collector output (Varies with the model depending on output is PNP or NPN.)Load current: 50 mA max. (residual voltage: 2 V max.), OFF current: 0.5 mA max. Protective circuits Reverse power supply connection protection, output short-circuit protection, and reverse output connection protection NPN output: Operate or reset: 50 µs PNP output: Operate or reset: 55 µs With workpiece Without workpiece Let the E3X-HD Help You Save Energy For Communications Unit NPN output Point Smart Tuning evolved evolve from the popular power tuning feature of conventional Amplifiers, Amp and yet is easier to use. It enables easily reproducing stable stabl detection conditions by newcomers or by operators on a site of the factory f overseas.The incident level is displayed without modification (0 tto 9,999) to make it easier to understand and to provide operators with a sense of ease with the larger numbers. E3X-ECT Standard models Type Smart Tuning Incident level adjustment without workpiece Incident level adjustment with workpiece E3X-CN12 Discrimination mart Fiber E3X-HD0 Response time art g Smunin T 1 Measurement S Ratings and Specifications Black rubber 9999 9999 8000 9999 E3X-CN11 Number of conductors CompoNet Low incident level With workpiece Without workpiece Press ess only twice. tw 3 Cable length EtherCAT With workpiece E3X-HD14 Smart Fiber Sensor E3X-HD Communications Units Optimum settings Short distance M8 connector Model Right-angle Optimum settings for saturated and low incident level Setting of Smart Tuning E3X-HD8 Number of conductors Straight Threshold setting Optimum settings Saturated incident level E3X-HD6 2m Communications method Easy Solution E3X-HD41 2M Communications Unit Master connector Appearance Smart tuning Step 2 E3X-HD11 2M Wire-saving connector Connectors are not provided with the Amplifier Units. Power adjustment Step p Type E3X-HD Conventional Model Power adjustment Pre-wired (2 m) Sensor I/O Connectors (Order Separately) (An Amplipier Unit with a M8 connector is required.) Fewer Setting Steps 1 PNP output Connectors are not provided with the Amplifier Units. Just press the S TUNE button once with a workpiece and once without a workpiece to regardless of the workpiece. automatically set the optimum incident level and threshold reg The optimum settings can be performed regardless of skills and a languages. enable smoothly shifting from trial The setting dispersion of the Sensors is also eliminated to ena of introduction cost. production to mass production, which ch contributes contributes to the reduction reduc Step NPN output Wire-saving Connectors (Order Separately) (An Amplipier Unit with a wire-saving connector is required.) Smart Tuning Easy and optimum settings for anyon anyone Easy Solution Connection method Appearance Standard models Consistent Settings for All Us Users Model Super-high-speed Mode (SHS) High-speed Mode (HS) Operate or reset: 250 µs Standard Mode (STND) Operate or reset: 1 ms Giga-power Mode (GIGA) Operate or reset: 16 ms Mutual interference prevention Possible for up to 10 units Maximum connectable Units with E3X-CRT: 16 units with E3X-ECT: 30 units 16 units OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com 960mW Conventional Models Cut E3X-HD *In Normal Mode through 25% 720mW compared with the conventional Point You can use more Sensors with the same power supply capacity as before. Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Communications Units are available. © OMRON Corporation 2011 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. E417-E1-01 Printed in Japan 1111 (1111) (W) E3X-HD Series Measurement Discrimination Presence ProcessCost Advantaged Long-term Stable Detection with No Maintenance E3X-HD SERIES Optimum Settings with the Press of a Button Stable Easy Stable No Maintenance Smart Power Control Long-term stable detection with no maintenance Smart Power Control Smart Power Control function detects the decrease in light intensity due to LED aged deterioration and the decrease in incident level due to dirt, then automatically compensates the optimum detection condition. You get maintenance-free operation that withstands the ambient environments. Long-term stable detection with no maintenance Even if the incident level is decreased due to dirt or mechanical vibration, Omron’s proprietory Smart Power Control combines APC and DPC to automatically compensate the power so that high-precision detection with no maintenance is performed. And if compensation is not possible, the DPC indicator flashes to let you know that maintenance is required.You get reliable operation with long-term stable detection and visible abnormality. Maintenance-free operation by double compensation of light intensity and incident level Greater operability and visibility are realized by a universal design Easy-to-operate Cover The universal design makes operation much easier and allows you to reliably communicate with operaters when starting up or maintaining systems overseas. Cover with an overhanging structure for easy opening that clicks securely back in place. Point Vibration Dirt APC can be used always on for E3X-HD. The GIGA RAY , which is described below, widely reduces the load with a low-power consumption LED. Furthermore comfortable long-term reliability has been realized. OMRON’s APC is the No.1 for long-term reliability! LED Aged deterioration APC Decreased （AUTO POWER art Smowerrol P ont C CONTROL） Automatically compensate light intensity Smart Power Control Smart Power Control Light intensity compensation Incident level Target value （DYNAMIC POWER UP DOWN TUNE With APC Without APC Compen- Compen- Compensated. sated. sated. (displayed incident level) Automatically compensate incident level Incident level compensation Symbolic buttons are easy to remember anywhere even for operaters overseas. MODE L/D Compatibility for easy operation and incorrect operation prevention. Time DPC CONTROL） Set to best of three positions: 90°, 135°, or 170°. Long-term stability Light intensity Compensated Co ompensated No Maintenance Always ON Three-position Cover Stopper Operations Buttons are arranged in a straight line. Flashes when compensation is no longer possible. DPC Setting value Pleasing operation even with gloves on. Space for I/O labels Hard to operate. Space for attaching I/O labels to make easy check. (threshold value) Time Finger gets caught. Conventional Models Detect Workpieces compensation without concern for Color and Size Advanced newly-developed GIGA RAY for long-term stability and energy savings art g Smunin T Lighting element GIGA RAY is equipped that margin of detection on all scenes has been realized The GIGA RAY has evolved into the newly-developed GIGA RAY to achieve 1.5 times the power efficiency of conventional models. This effect is utilized to enhance APC service life for long-term stability and energy-saving effect more than enhancing the sensing distance. It contributes to the reliability and energy saving of your equipment. Umparalleled power of GIGA RAY , with the highest level stably detects large workpieces and low-reflective workpieces such as black rubber whose detection was unstable before. Long-distance detection for large workpieces VERSION VERSION Detection in oily environments E3X-HD Pushbutton switches (no sliding switches) Smart Tuning Smart tuning for the optimum settings with just one button. UP Lower current consumption with the same sensing distance to save energy and extend service life. GIGA RAY Sliding switches Without GIGA RAY art rive Smco D E Detection in water and liquid medicine environments Easy Fiber Insertion E3X-HD [ Stable] and [Easy] operation realized Ultimate Usability Instruction Manuals are included in English, Japanese, and simplified Chinese. E3X CRT E3X-CRT Make the following search to access information on network standards and products. through Access keyword from search engines : Omron Field Network L Arc Design A strong accent line gives a compact look to improve equipment design. D DPC Operation mode indicator to prevent incorrect settings. L OUT indicator O U T ST Flashing indicator enables preventive maintenance. D DPC Search E3X-ECT Indicates that the optimum settings have been made. ST 8888 8888 Threshold (green) Connection of multiple units is available. (E3X-CRT: 16 units, E3X-ECT: 30 units) Series New Concept: Visible Indicators Point Greatly reduce wiring work for Fiber Amplifiers ers with zero-line connection. You can change settings from an external device to greatly reduce setup work. mart Fiber Visibility is improved with digital displays and visible indicators. Insertion performance is improved with a large insertion guide. Maintenance cost is furthermore reduced! Open network is supported Detection of low-reflective workpieces such as black rubber Use the Fiber Heads that are suitable for the application environment. Indications Power efficiency (power at same current) Incident level (red) E3X-HD Series Measurement Discrimination Presence ProcessCost Advantaged Long-term Stable Detection with No Maintenance E3X-HD SERIES Optimum Settings with the Press of a Button Stable Easy Stable No Maintenance Smart Power Control Long-term stable detection with no maintenance Smart Power Control Smart Power Control function detects the decrease in light intensity due to LED aged deterioration and the decrease in incident level due to dirt, then automatically compensates the optimum detection condition. You get maintenance-free operation that withstands the ambient environments. Long-term stable detection with no maintenance Even if the incident level is decreased due to dirt or mechanical vibration, Omron’s proprietory Smart Power Control combines APC and DPC to automatically compensate the power so that high-precision detection with no maintenance is performed. And if compensation is not possible, the DPC indicator flashes to let you know that maintenance is required.You get reliable operation with long-term stable detection and visible abnormality. Maintenance-free operation by double compensation of light intensity and incident level Greater operability and visibility are realized by a universal design Easy-to-operate Cover The universal design makes operation much easier and allows you to reliably communicate with operaters when starting up or maintaining systems overseas. Cover with an overhanging structure for easy opening that clicks securely back in place. Point Vibration Dirt APC can be used always on for E3X-HD. The GIGA RAY , which is described below, widely reduces the load with a low-power consumption LED. Furthermore comfortable long-term reliability has been realized. OMRON’s APC is the No.1 for long-term reliability! LED Aged deterioration APC Decreased （AUTO POWER art Smowerrol P ont C CONTROL） Automatically compensate light intensity Smart Power Control Smart Power Control Light intensity compensation Incident level Target value （DYNAMIC POWER UP DOWN TUNE With APC Without APC Compen- Compen- Compensated. sated. sated. (displayed incident level) Automatically compensate incident level Incident level compensation Symbolic buttons are easy to remember anywhere even for operaters overseas. MODE L/D Compatibility for easy operation and incorrect operation prevention. Time DPC CONTROL） Set to best of three positions: 90°, 135°, or 170°. Long-term stability Light intensity Compensated Co ompensated No Maintenance Always ON Three-position Cover Stopper Operations Buttons are arranged in a straight line. Flashes when compensation is no longer possible. DPC Setting value Pleasing operation even with gloves on. Space for I/O labels Hard to operate. Space for attaching I/O labels to make easy check. (threshold value) Time Finger gets caught. Conventional Models Detect Workpieces compensation without concern for Color and Size Advanced newly-developed GIGA RAY for long-term stability and energy savings art g Smunin T Lighting element GIGA RAY is equipped that margin of detection on all scenes has been realized The GIGA RAY has evolved into the newly-developed GIGA RAY to achieve 1.5 times the power efficiency of conventional models. This effect is utilized to enhance APC service life for long-term stability and energy-saving effect more than enhancing the sensing distance. It contributes to the reliability and energy saving of your equipment. Umparalleled power of GIGA RAY , with the highest level stably detects large workpieces and low-reflective workpieces such as black rubber whose detection was unstable before. Long-distance detection for large workpieces VERSION VERSION Detection in oily environments E3X-HD Pushbutton switches (no sliding switches) Smart Tuning Smart tuning for the optimum settings with just one button. UP Lower current consumption with the same sensing distance to save energy and extend service life. GIGA RAY Sliding switches Without GIGA RAY art rive Smco D E Detection in water and liquid medicine environments Easy Fiber Insertion E3X-HD [ Stable] and [Easy] operation realized Ultimate Usability Instruction Manuals are included in English, Japanese, and simplified Chinese. E3X CRT E3X-CRT Make the following search to access information on network standards and products. through Access keyword from search engines : Omron Field Network L Arc Design A strong accent line gives a compact look to improve equipment design. D DPC Operation mode indicator to prevent incorrect settings. L OUT indicator O U T ST Flashing indicator enables preventive maintenance. D DPC Search E3X-ECT Indicates that the optimum settings have been made. ST 8888 8888 Threshold (green) Connection of multiple units is available. (E3X-CRT: 16 units, E3X-ECT: 30 units) Series New Concept: Visible Indicators Point Greatly reduce wiring work for Fiber Amplifiers ers with zero-line connection. You can change settings from an external device to greatly reduce setup work. mart Fiber Visibility is improved with digital displays and visible indicators. Insertion performance is improved with a large insertion guide. Maintenance cost is furthermore reduced! Open network is supported Detection of low-reflective workpieces such as black rubber Use the Fiber Heads that are suitable for the application environment. Indications Power efficiency (power at same current) Incident level (red) No Maintenance ProcessCost Advantaged Ordering Information E3X-HD E3X-HD Series SERIES NEW Amplifier Units of a Button Type Easy For Communications Unit connection 1 Threshold setting Appearance Cable length Slave connector Without workpiece 2m 4 Threshold setting ( Set to intermediate value between the incident levels with and without a workpiece. With workpiece Without workpiece 9600 100 ) Settings are simultaneously completed. 9999 1600 Optimum setting With workpiece Without workpiece Presence E3X-HD44 Slave connector E3X-CN12 Master connector E3X-CN11 There is no master/slave distinction for the Amplifiers. Along with the Amplifier, purchase the Connectors that are required for applications. Model XS3F-M421-402-A Surprisingly Stable Detection with Your Finger tip Exceptionally easy operation and stabilizing technology reduce maintenance cost. XS3F-M422-402-A Appearance Applicable Fiber Amplifier Units Model E3X-HD0 E3X-MDA0 E3X-DA0-S E3X-CRT E3X-HD11 E3X-HD6 E3X-HD14 PNP output E3X-HD41 E3X-HD8 E3X-HD44 Item Connection method Pre-wired Wire-saving connector M8 connector Smart Eco Drive Contribute to energy saving of equipment The increased power efficiency of the newly developed GIGA RAY and the new circuit design reduce power consumption by 25% over conventional models. This supports saving energy and power in your equipment. Power consumption of only 720 mW has been realized in operation in Normal Mode. And there are no restrictions to sensing distance and response time. E3X-HD0 Communications Unit connector Light source (wavelength) Red, 4-element LED (625 nm) Power supply voltage 12 to 24 VDC ±10%, ripple (p-p)10% max. Power consumption Nomal Mode: 720mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC) Eco ON: 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC) Eco LO: 640 mW max. (Current consumption 26 mA max. at 24 VDC, 53 mA max. at 12 VDC) Control output Load power supply voltage: 26.4 VDC max., open-collector output (Varies with the model depending on output is PNP or NPN.)Load current: 50 mA max. (residual voltage: 2 V max.), OFF current: 0.5 mA max. Protective circuits Reverse power supply connection protection, output short-circuit protection, and reverse output connection protection NPN output: Operate or reset: 50 µs PNP output: Operate or reset: 55 µs With workpiece Without workpiece Let the E3X-HD Help You Save Energy For Communications Unit NPN output Point Smart Tuning evolved evolve from the popular power tuning feature of conventional Amplifiers, Amp and yet is easier to use. It enables easily reproducing stable stabl detection conditions by newcomers or by operators on a site of the factory f overseas.The incident level is displayed without modification (0 tto 9,999) to make it easier to understand and to provide operators with a sense of ease with the larger numbers. E3X-ECT Standard models Type Smart Tuning Incident level adjustment without workpiece Incident level adjustment with workpiece E3X-CN12 Discrimination mart Fiber E3X-HD0 Response time art g Smunin T 1 Measurement S Ratings and Specifications Black rubber 9999 9999 8000 9999 E3X-CN11 Number of conductors CompoNet Low incident level With workpiece Without workpiece Press ess only twice. tw 3 Cable length EtherCAT With workpiece E3X-HD14 Smart Fiber Sensor E3X-HD Communications Units Optimum settings Short distance M8 connector Model Right-angle Optimum settings for saturated and low incident level Setting of Smart Tuning E3X-HD8 Number of conductors Straight Threshold setting Optimum settings Saturated incident level E3X-HD6 2m Communications method Easy Solution E3X-HD41 2M Communications Unit Master connector Appearance Smart tuning Step 2 E3X-HD11 2M Wire-saving connector Connectors are not provided with the Amplifier Units. Power adjustment Step p Type E3X-HD Conventional Model Power adjustment Pre-wired (2 m) Sensor I/O Connectors (Order Separately) (An Amplipier Unit with a M8 connector is required.) Fewer Setting Steps 1 PNP output Connectors are not provided with the Amplifier Units. Just press the S TUNE button once with a workpiece and once without a workpiece to regardless of the workpiece. automatically set the optimum incident level and threshold reg The optimum settings can be performed regardless of skills and a languages. enable smoothly shifting from trial The setting dispersion of the Sensors is also eliminated to ena of introduction cost. production to mass production, which ch contributes contributes to the reduction reduc Step NPN output Wire-saving Connectors (Order Separately) (An Amplipier Unit with a wire-saving connector is required.) Smart Tuning Easy and optimum settings for anyon anyone Easy Solution Connection method Appearance Standard models Consistent Settings for All Us Users Model Super-high-speed Mode (SHS) High-speed Mode (HS) Operate or reset: 250 µs Standard Mode (STND) Operate or reset: 1 ms Giga-power Mode (GIGA) Operate or reset: 16 ms Mutual interference prevention Possible for up to 10 units Maximum connectable Units with E3X-CRT: 16 units with E3X-ECT: 30 units 16 units OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com 960mW Conventional Models Cut E3X-HD *In Normal Mode through 25% 720mW compared with the conventional Point You can use more Sensors with the same power supply capacity as before. Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Communications Units are available. © OMRON Corporation 2011 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. E417-E1-01 Printed in Japan 1111 (1111) (W) E3X-HD Series Measurement Discrimination Presence ProcessCost Advantaged Long-term Stable Detection with No Maintenance E3X-HD SERIES Optimum Settings with the Press of a Button Stable Easy Stable No Maintenance Smart Power Control Long-term stable detection with no maintenance Smart Power Control Smart Power Control function detects the decrease in light intensity due to LED aged deterioration and the decrease in incident level due to dirt, then automatically compensates the optimum detection condition. You get maintenance-free operation that withstands the ambient environments. Long-term stable detection with no maintenance Even if the incident level is decreased due to dirt or mechanical vibration, Omron’s proprietory Smart Power Control combines APC and DPC to automatically compensate the power so that high-precision detection with no maintenance is performed. And if compensation is not possible, the DPC indicator flashes to let you know that maintenance is required.You get reliable operation with long-term stable detection and visible abnormality. Maintenance-free operation by double compensation of light intensity and incident level Greater operability and visibility are realized by a universal design Easy-to-operate Cover The universal design makes operation much easier and allows you to reliably communicate with operaters when starting up or maintaining systems overseas. Cover with an overhanging structure for easy opening that clicks securely back in place. Point Vibration Dirt APC can be used always on for E3X-HD. The GIGA RAY , which is described below, widely reduces the load with a low-power consumption LED. Furthermore comfortable long-term reliability has been realized. OMRON’s APC is the No.1 for long-term reliability! LED Aged deterioration APC Decreased （AUTO POWER art Smowerrol P ont C CONTROL） Automatically compensate light intensity Smart Power Control Smart Power Control Light intensity compensation Incident level Target value （DYNAMIC POWER UP DOWN TUNE With APC Without APC Compen- Compen- Compensated. sated. sated. (displayed incident level) Automatically compensate incident level Incident level compensation Symbolic buttons are easy to remember anywhere even for operaters overseas. MODE L/D Compatibility for easy operation and incorrect operation prevention. Time DPC CONTROL） Set to best of three positions: 90°, 135°, or 170°. Long-term stability Light intensity Compensated Co ompensated No Maintenance Always ON Three-position Cover Stopper Operations Buttons are arranged in a straight line. Flashes when compensation is no longer possible. DPC Setting value Pleasing operation even with gloves on. Space for I/O labels Hard to operate. Space for attaching I/O labels to make easy check. (threshold value) Time Finger gets caught. Conventional Models Detect Workpieces compensation without concern for Color and Size Advanced newly-developed GIGA RAY for long-term stability and energy savings art g Smunin T Lighting element GIGA RAY is equipped that margin of detection on all scenes has been realized The GIGA RAY has evolved into the newly-developed GIGA RAY to achieve 1.5 times the power efficiency of conventional models. This effect is utilized to enhance APC service life for long-term stability and energy-saving effect more than enhancing the sensing distance. It contributes to the reliability and energy saving of your equipment. Umparalleled power of GIGA RAY , with the highest level stably detects large workpieces and low-reflective workpieces such as black rubber whose detection was unstable before. Long-distance detection for large workpieces VERSION VERSION Detection in oily environments E3X-HD Pushbutton switches (no sliding switches) Smart Tuning Smart tuning for the optimum settings with just one button. UP Lower current consumption with the same sensing distance to save energy and extend service life. GIGA RAY Sliding switches Without GIGA RAY art rive Smco D E Detection in water and liquid medicine environments Easy Fiber Insertion E3X-HD [ Stable] and [Easy] operation realized Ultimate Usability Instruction Manuals are included in English, Japanese, and simplified Chinese. E3X CRT E3X-CRT Make the following search to access information on network standards and products. through Access keyword from search engines : Omron Field Network L Arc Design A strong accent line gives a compact look to improve equipment design. D DPC Operation mode indicator to prevent incorrect settings. L OUT indicator O U T ST Flashing indicator enables preventive maintenance. D DPC Search E3X-ECT Indicates that the optimum settings have been made. ST 8888 8888 Threshold (green) Connection of multiple units is available. (E3X-CRT: 16 units, E3X-ECT: 30 units) Series New Concept: Visible Indicators Point Greatly reduce wiring work for Fiber Amplifiers ers with zero-line connection. You can change settings from an external device to greatly reduce setup work. mart Fiber Visibility is improved with digital displays and visible indicators. Insertion performance is improved with a large insertion guide. Maintenance cost is furthermore reduced! Open network is supported Detection of low-reflective workpieces such as black rubber Use the Fiber Heads that are suitable for the application environment. Indications Power efficiency (power at same current) Incident level (red) Ordering Information E3X-HD Series Amplifier Units Type Model NPN output PNP output E3X-HD11 2M E3X-HD41 2M Connection method Appearance Pre-wired (2 m) Standard models Wire-saving connector E3X-HD6 M8 connector E3X-HD14 Communications Unit For Communications Unit connection E3X-HD8 E3X-HD44 E3X-HD0 Wire-saving Connectors (Order Separately) (An Amplipier Unit with a wire-saving connector is required.) Connectors are not provided with the Amplifier Units. Type Appearance Master connector Cable length Number of conductors 2m Slave connector Model 3 E3X-CN11 1 E3X-CN12 Master connector E3X-CN11 Slave connector E3X-CN12 There is no master/slave distinction for the Amplifiers. Along with the Amplifier, purchase the Connectors that are required for applications. Sensor I/O Connectors (Order Separately) (An Amplipier Unit with a M8 connector is required.) Connectors are not provided with the Amplifier Units. Appearance Cable length Straight Number of conductors 2m Model XS3F-M421-402-A 4 Right-angle XS3F-M422-402-A Communications Units Communications method Appearance Applicable Fiber Amplifier Units Model E3X-HD0 E3X-MDA0 E3X-DA0-S E3X-CRT CompoNet EtherCAT E3X-ECT Ratings and Specifications For Communications Unit Standard models Type NPN output E3X-HD11 E3X-HD6 E3X-HD14 PNP output E3X-HD41 E3X-HD8 E3X-HD44 Pre-wired Wire-saving connector M8 connector Item Connection method Power consumption Light source (wavelength) Power supply voltage Nomal Mode Eco ON Eco LO Control output Protective circuits Response time Super-high-speed Mode (SHS) E3X-HD0 Communications Unit connector Red, 4-element LED (625 nm) 12 to 24 VDC ±10%, ripple (p-p)10% max. 720mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC) 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC) 640 mW max. (Current consumption 26 mA max. at 24 VDC, 53 mA max. at 12 VDC) Load power supply voltage: 26.4 VDC max., open-collector output Load current: Groups of 1 to 3 Amplifier Units: 100 mA max., Groups of 4 to 16 Amplifier Units: 20 mA max. Residual voltage: At load current of less than 10 mA: 1 V max., At load current of 10 to 100 mA: 2 V max. OFF current: 0.1 mA max. Reverse power supply connection protection, output short-circuit protection, and reverse output connection protection NPN output: Operate or reset: 50 µs PNP output: Operate or reset: 55 µs High-speed Mode (HS) Operate or reset: 250 µs Standard Mode (STND) Operate or reset: 1 ms Giga-power Mode (GIGA) Operate or reset: 16 ms Mutual interference prevention Possible for up to 10 units Maximum connectable Units with E3X-CRT: 16 units with E3X-ECT: 30 units 16 units OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2011 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. CSM_4_1_0714 Printed in Japan Cat. No. E417-E1-01 1111 (1111) (W)