I/Q MIXER/ MODULATOR MODEL MIQ24MS-5 Available as: MIQ24MS-5, .850 “ x 1.05” Microstrip Carrier Features RF: 2 GHz LO: 2 GHz ±62 MHz IF: DC to 62 MHz Excellent Image Rejection High LO to RF Isolation: 35 dB Typical Operating Temp. - 55ºC to +100ºC Electrical Specifications : (1) Conditions RF (GHz) Parameter (OUTPUT) SSB Conversion loss: Isolations LO to RF LO to IF IF to RF 2.0 Sideband Suppression: 2.0 LO Power Input: 2.0 Specifications LO (GHz) IF (MHz) 2 GHz ±62 MHz DC - 62 (INPUT) 2 GHz ±62 MHz 2 GHz ±62 MHz (INPUT) Typical Min Max 6.5 dB DC - 62 25 dB 15 dB 25 dB 35 dB 20 dB 30 dB 2 GHz ±62 MHz DC - 62 25 dB 27 dB 2 GHz ±62 MHz DC - 62 8.0 dB 10 dBm 8.0 dB 11 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25ºC with an LO power of +10 dBm. 2. Noise figure is typically within ±0.5 dB of Conversion Loss for IF frequencies greater than 10 MHz. 3. Operating Temperature Range: - 55ºC to +100ºC Typical Performance Data Case Outline MSQ8 Conversion Loss (dB) 3 4 5 6 7 1.9 10 GHz LO to RF, LO to IF Isolation (dB) LO to IF 20 30 LO to RF 40 50 2.1 1.9 GHz 2.1 Sideband Suppression (dB) 0 10 20 All dimensions are in inches and [mm]. Microstrip Traces: LO, RF, and IF traces are 0.02 in (0.51 mm) wide tin plated copper on Duroid, suitable for solder attach. 30 40 1.9 GHz Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 2.1 01/03/06 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001