CATALOG 2002 - TOCOS America, Inc.

TOCOS
®
TRIMMER
POTENTIOMETERS
Single
Single &
& Multi-Turn
Multi-Turn
Surface
Surface Mount
Mount
Single
Single &
& Multi-Turn
Multi-Turn
Through-Hole
Through-Hole
CATALOG 2002
Multi-Turn, Through-Hole Trimmer Potentiometers - Page 91
Single-Turn, Through-Hole Trimmer Potentiometers - Page 29
Single-Turn and Multi-Turn, Surface Mount Trimmer Potentiometers - Page 8
TOCOS
®
Welcome!
POTENTIOMETERS
We are TOCOS America, Inc.
Quality Control
a wholly owned subsidiary of Tokyo Cosmos Electric
Co., Ltd. ( TOCOS), a worldwide supplier of electronic
components specializing in quality potentiometer
products.
Established in 1957, TOCOS has kept pace with
the demands of electronic technology for more than
40 years, supplying superior quality components at
competitive prices around the world.
Our wide range of products represent the cutting
edge of the electronics industry in major areas such
as telecommunications, instrumentation, automotive
technology, computer peripherals, consumer
products, and the military.
Our “total quality control environment” is supported
by a start to finish inspection program that begins with
the sales person who takes your order and ends with
the supplier who must be certified to guarantee justin-time delivery. Every work station is an inspection
point in the manufacturing process and the finished
products are always inspected for electrical and
mechanical properties as well as environmental
reliability.
Reliability
The in-house design and manufacturing of automatic
assembly machines and automatic testing and
inspection equipment guarantees efficient, quality
component production. We design and manufacture
piece parts such as polymer resistive inks, multi-wire
brush contacts, and plastic and metal component
housings.
TOCOS examines the performance of its products
long after their sale, through the widely used FIT, or
failure rate in the field methodology. Of the three
hundred million units of our GF06 series produced
over a 6-year span, less than 1ppm failed for a 0.06
(FIT ) failure rate in the field.
Electronics technology has been one of the most
exciting innovations of this century. We at TOCOS are
committed to the bright future of technological
progress, now and for the 21st century. So get to know
TOCOS...you’ll be glad you did.
Research and Development
ISO Certification
The continuing technological demand for products
with higher accuracy, longer life, and better reliability
has led us to utilize the ingenuity of all our employees
through an innovative “think and create” philosophy,
encouraging company-wide contributions to product
research and development.
With the help of this program, we at TOCOS
continue to develop better trimmer potentiometers as
well as innovative products such as our thick-film
hybrid IC’s, flat self-regulating heater elements, and
automotive electronic parts.
TOCOS products are manufactured by our parent
company Tokyo Cosmos Electric Co. in ISO 9001
and ISO 9002 certified facilities.
Design and Manufacturing
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
1
E-mail: [email protected]
www.tocos.com
TOCOS
®
Contents
POTENTIOMETERS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Cross Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . .
6
Surface Mount Trimmer Potentiometers
Single-Turn Sealed Cermet
G3 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Turn Sealed Cermet
GV4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
14
23
Through-Hole Trimmer Potentiometers
Single-Turn Sealed Cermet
G4C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
GF04 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
RJC06 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
GF06 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
GF063 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
GF063-K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
GF12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
G12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Single-Turn Sealed Wirewound
RA12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Multi-Turn Sealed Cermet
RJC26 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
RJC097 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
RJC07R Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
GV6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Guidelines & Precautions . . . . . . . . . . . . . . . . . . . . . . . 106
For Using Trimmer Potentiometers
Explanation of Terms . . . . . . . . . . . . . . . . . . . . . . . . . 110
Conversion Tables . . . . . . . . . . . . . . . . . . . Inside Back Cover
Warranty and Product Suitability
TOCOS warrants each product shipped to be free from defects. TOCOS agrees to remedy any defects or to furnish replacement part(s) in
exchange, while under normal installation, use and service, provided that the defective material is sent, transportation prepaid, to TOCOS for
confirmation of the defect.
It is the buyer/specifier’s responsibility to determine suitable use of TOCOS products in or for their product application. TOCOS makes no
warranties and assumes no liability as to the suitability or sufficiency for the buyer’s application of TOCOS products.
The information in this publication is believed to be accurate and reliable with no guarantee as to its completeness. The components described
herein are designed, tested and manufactured to meet and or exceed the specifications for each product. TOCOS reserves the right to make
changes to the specifications, without notice.
TOCOS AMERICA, INC.
2
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
Selection Guide
POTENTIOMETERS
Surface Mount, Cermet Trimmer Potentiometers
Series
G3 Series
G4 Series
GV4 Series
Model Examples
Nominal Size and
Construction
3mm Square
Sealed SMD
4mm Square
Sealed SMD
4mm Square
Sealed SMD
Resistive Element
Cermet
Cermet
Cermet
Adjustment Travel
Single-Turn: 22010
Single-Turn: 20010
Multi-Turn:12 Turns2 nominal
Adjustment Type
Top Adjust
Top, Side and
Bottom Adjust
Top and Side Adjust
Flush with Housing
Terminal Style
J-Hook: A
Gull-Wing: B
J-Hook: A, D, S
Gull-Wing: B, E, BF
J-Hook: W & J
Gull-Wing: G
Resistance Range
50Ω to 2MΩ
50Ω to 2MΩ
10Ω to 2MΩ
Resistance Tolerance
20% Standard
20% Standard (10% Optional)
10% Standard
Power Rating
0.125 W at 70C
0 W at 125C
0.25 W at 70C
0 W at 125C
0.25 W at 85C
0 W at 150C
Temperature Range
55C to 125C
55C to 125C
65C to 150C
Other Features
Single-Slot or Automatic
Adjust Cross-Slot Design
Space-Saving Size
Embossed Tape & Reel
Single-Slot or Automatic
Adjust Cross-Slot Design
Space-Saving Size
Embossed Tape & Reel
Excellent Adjustability
TCR = 100ppm /C
Low CRV = 1%
Embossed Tape & Reel
Catalog Page No.
Page 8
Page 14
Page 23
Single-Turn, Through-Hole, Cermet Trimmer Potentiometers
Series
G4C Series
GF04 Series
RJC06 Series
Model Examples
Nominal Size and
Construction
4mm Square
Sealed Through-Hole
4mm Round
Sealed Through-Hole
1/4” Round
Sealed Through-Hole
Resistive Element
Cermet
Cermet
Cermet
Adjustment Travel
Single-Turn: 20010
Single-Turn: 190
Single-Turn: 24010
Adjustment Type
Top and
Bottom Adjust
Top and
Side Adjust
Top, Side and
Bottom Adjust
Terminal Style
Triangular: C & CF
Triangular: W & S
In-Line: U & V
Triangular, 15mml : P & W
Triangular, 5mml : S & X
Triangular, 8mml : F
Resistance Range
50Ω to 2MΩ
100Ω to 1MΩ
10Ω to 1MΩ
Resistance Tolerance
20% Standard (10% Optional)
10% and 20%
10% and 20%
Power Rating
0.25 W at 70C
0 W at 125C
0.5 W at 70C
0 W at 125C
0.5 W at 70C
0 W at 125C
Temperature Range
55C to 125C
55C to 125C
55C to 125C
Other Features
Through-Hole Versions
of SMD G4 Series
Designed for Flow or
Reflow Soldering
Excellent Stability
Low Noise and Low TC
High Power Rating
Space-Saving Size
Excellent Adjustability
and Stability
Low CRV and Low TC
Gold Flushed Terminals
Catalog Page No.
Page 29
Page 32
Page 36
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
3
E-mail: [email protected]
www.tocos.com
TOCOS
®
Selection Guide
POTENTIOMETERS
Single-Turn, Through-Hole, Cermet Trimmer Potentiometers
Series
GF063 Series
GF06 Series
GF063-K Series
Model Examples
Nominal Size and
Construction
1/4” Square
Sealed Through-Hole
1/4” Square
Sealed Through-Hole
1/4” Square
Sealed Through-Hole
Resistive Element
Cermet
Cermet
Cermet
Adjustment Travel
Single-Turn: 21010
Single-Turn: 21010
Single-Turn: 21010
Adjustment Type
Top and
Side Adjust
Top and
Side Adjust
Top Knob and
Side Knob Adjust
Terminal Style
Triangular: P, P1, P2, W,
Y, Y1, S, S1, X & X1
In-Line: U, U1, V & V1
Triangular: P, P1, P2, W,
Y, Y1, S, S1, X & X1
In-Line: U, U1, V & V1
Triangular: PK, P1K, W
SK, S1K, XK & X1K
In-Line: UK, VK & V1K
Resistance Range
10Ω to 5MΩ
10Ω to 5MΩ
10Ω to 5MΩ
Resistance Tolerance
10% and 20%
10% and 20%
10% and 20%
Power Rating
0.5 W at 70C
0 W at 125C
0.5 W at 70C
0 W at 125C
0.5 W at 70C
0 W at 125C
Temperature Range
55C to 125C
55C to 125C
55C to 125C
Other Features
14 Models Available
Cross-Slot Rotor Design
Zero Backlash
Tape & Reel or Ammo Box
18 Models Available
Cross-Slot Design with
Larger Rotor than GF06 Series
Tape & Reel or Ammo Box
Same Housing Size and
Design as GF063 Series
Tape & Ammo Box for
PK, P1K & UK Models
Catalog Page No.
Page 41
Page 52
Page 64
Single-Turn, Through-Hole, Cermet and Wirewound Trimmer Potentiometers
Series
G12 Series
GF12 Series
RA12 Series
Model Examples
Nominal Size and
Construction
12mm Square
Sealed Through-Hole
1/2” Round
Sealed Through-Hole
12mm Round
Sealed Through-Hole
Resistive Element
Cermet
Cermet
Wirewound
Adjustment Travel
Single-Turn: 27010
Single-Turn: 27010
Single-Turn: 27010
Adjustment Type
0S, 5S,10S 8.2SK Styles
in Top and Side Adjust
Top and
Side Adjust
Top and
Side Adjust
Terminal Style
Triangular: P, S, X & R
Triangular: P, S & X
Triangular: P, S & X
Resistance Range
10Ω to 1MΩ
10Ω to 1MΩ
10Ω to 20kΩ
Resistance Tolerance
10% and 20%
10% and 20%
10% Standard
Power Rating
0.75 W at 70C
0 W at 125C
1.0 W at 70C
0 W at 125C
0.5 W at 70C
0 W at 125C
Temperature Range
55C to 125C
55C to 125C
55C to 125C
Other Features
Flush Rotor, 5 or 10mm Metal
Shafts, or Knurled Plastic Shaft
Stable, Infinite Resolution
5,000 Cycle Lifetime
Dial Markings
Excellent Stability
1.0 Watt Power Rating
Low Noise and Low TC
High Setting Stability
Low Equivalent Noise Resistance
Low Temperature Coefficient
Long Rotational Life
Catalog Page No.
Page 73
Page 84
Page 88
TOCOS AMERICA, INC.
4
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
Selection Guide
POTENTIOMETERS
Multi-Turn, Through-Hole, Square Cermet Trimmer Potentiometers
Series
GV6 Series
RJC26 Series
Model Examples
Nominal Size and
Construction
1/4” Square
Sealed Through-Hole
1/4” Square
Sealed Through-Hole
Resistive Element
Cermet
Cermet
Adjustment Travel
Multi-Turn: 2 Turns (73510)
Multi-Turn: 8.5 Turns1
Adjustment Type
Top and
Side Adjust
Top and
Side Adjust
Terminal Style
Triangular: P & S
In-Line: U & V
Triangular: W & X
Resistance Range
10Ω to 1MΩ
100Ω to 5MΩ
Resistance Tolerance
10% and 20%
10% and 20% ( ) 2MΩ); 30%,20% ( 0 3MΩ)
Power Rating
0.5 W at 70C
0 W at 125C
0.25 W at 70C
0 W at 125C
Temperature Range
55C to 125C
55C to 125C
Other Features
Space-Saving, Low Profile Design
Excellent Stability and Adjustability
Low Noise
Tape & Reel or Ammo Box
11-Turn Mechanical Travel
High Setting Accuracy
State-of-the-Art Brush Contact Design
Stop-Clutch Action at Ends of Element
Catalog Page No.
Page 101
Page 91
Multi-Turn, Through-Hole, Rectilinear Cermet Trimmer Potentiometers
Series
RJC07R Series
RJC097 Series
Model Examples
Nominal Size and
Construction
3/4” Rectilinear
Sealed Through-Hole
3/4” Rectilinear
Sealed Through-Hole
Resistive Element
Cermet
Cermet
Adjustment Travel
Multi-Turn: 13 Turns3
Multi-Turn: 15 Turns3
Adjustment Type
Top Adjust
Side Adjust
Terminal Style
Triangular: R (without knob) and
RK2 (with permanent knob)
Triangular: P (without knob); PK (small knob);
PK1 (removable knob); PK2 (permanent knob)
Resistance Range
10Ω to 1MΩ
10Ω to 1MΩ
Resistance Tolerance
10% and 20%
10% and 20%
Power Rating
0.75 W at 40C
0 W at 125C
0.75 W at 70C
0 W at 125C
Temperature Range
55C to 125C
55C to 125C
Other Features
Space-Saving, Vertical Mount Design
High Performance, Excellent Stability
Single-Slot Top Adjustment
Knob Style for Fingertip Control
Single-Slot Short Shaft, Small or Large Permanent
Knobs or Extended Shaft with Removable Knob
Excellent Stability and Low Noise
State-of-the-Art Brush Contact Design
Catalog Page No.
Page 98
Page 94
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
5
E-mail: [email protected]
www.tocos.com
TOCOS
®
Cross Reference Guide
POTENTIOMETERS
Surface Mount Cermet Trimmers
3mm Square, Single-Turn, Sealed
B.I. (Beckman)
Bourns
Dale
BC Components
22A
22B
3313J
TS3YJ
ST-3A
Murata
Spectrol
TOCOS ®
G3A
G3B
4mm Square, Single-Turn, Sealed, Industrial
TOCOS ®
4J
4G
G4A
G4B
G4C
G4SA
Spectrol
TOCOS ®
Bourns
Dale
BC Components
23A, 23J
23B, 23G, 23GL
3314J
3314G
3314H
3314S, 3314Z
ST53YJ, TS4YJ
ST53YL, TS4YL
ST-4A
ST-4B
ST-4C
ST-4G
Dale
BC Components
Murata
11-Turn
TSM43ZJ
TSM43ZL
TSM43YJ
12-Turn
SM-4A
11-Turn
POG5HN
SM-4W
POG5AN
BC Components
Murata
Spectrol
RVG4J03A
RVG4J04A
RVG4H01A
4H
* Discontinued
TRG043S1*
TRG042S1*
TRG043S4*
Spectrol
TOCOS ®
23S
Murata
Spectrol
B.I. (Beckman)
4mm Square, Multi-Turn, Sealed
B.I. (Beckman)
10-Turn
44J
44G
44W
Bourns
11-Turn
3224J
3224G
3224W
5-Turn
3214J
3214G
3214W
12-Turn
GV4J
GV4G
GV4W
4mm Square, Single-Turn, Open Frame
B.I. (Beckman)
Bourns
Dale
21X
21W
21Z
3304A, 3364A
3304C
3304W, 3364W
ST-23
ST-22
TOCOS ®
Through-Hole Cermet Trimmers
1/4” and 3/8” Square, Single-Turn
B.I. (Beckman)
1/4”
25P
Bourns
BC Components
3/8”
1/4”
3323P, 3362P
3/8”
1/4”
T70YE
3/8”
72P
3362R
3362H
3323U, 3362U
3386P
T70YP
T70YB
T70YU
T20YP
25W
25U
72PL
72PM
25X
25RX
25S
25RS
25V
25RV
25UTR
25VTR
Dale
72X
3323X, 3362X
3323W, 3362W
3323S
3362M
72XL
3386U
3386T
3386Y
3386F
3386H
3386X
T70XH
T20YM
T20XH
T70XF
3386W
3386C
T70XW
3362U
3362M
T20XW
1/4”
CT-6P, FT-6P
CT-6P, FT-6P
CT-6R
CT-6W
CT-6V, FT-6V
CT-6N
CT-6X, FT-6X
CT-6S, FT-6S
CT-6G
CT-6H, FT-6H
Murata
3/8”
3/8”
8038EKP
3104P
1/4”
76P
3/8”
63P
76H
8038EKA
8038EKI
8038EKH
8038EKX
8038EKU
3104T
3104Y
3104F
3104H
3104X
8038EKV
3104W
3104C
76W
63M
63X
63S
CT-6TV, FT-6TV
CT-6TH, FT-6TH
1/4”
GF06P
GF06P1
GF06P2
GF06W
GF06U
GF06U1
GF06Y
GF06Y1
GF06X
GF06X1
GF06S
GF06S1
GF06V
GF06V1
GF06UT, UT2
GF06VT, VT2
TOCOS AMERICA, INC.
6
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
Cross Reference Guide
POTENTIOMETERS
Through-Hole Cermet Trimmers
(Continued)
4mm Round, Single-Turn
B.I. (Beckman)
Bourns
Dale
24W
24S
BC Components
Murata
RJ-4W
RJ-4WS
1103H
1104B
Spectrol
TOCOS ®
GF04W
GF04S
GF04V
GF04U
GF04VT
GF04UT
24U
24UF
1/4” Round, Single-Turn
B.I. (Beckman)
Bourns
Dale
BC Components
Murata
Spectrol
TOCOS ®
62M, (82M)
62P, (82P)
(82PA)
3329P
3329H
3329W
3329S
T7RYA
T7RYB
T7RXX
RJ-6P
RJ-6W
RJ-6X
RJ-6S
RJ-6F
3321P
3321H
3321N
3321S
3321F
75P
75H
RJC06P
RJC06W
RJC06X
RJC06S
RJC06F
Dale
BC Components
Murata
Spectrol
TOCOS ®
1/2” Round, Single-Turn
B.I. (Beckman)
Bourns
93P (Reverse Pin-out)
RJ-13P
RJ-13S
G12P
G12S
G12X
1/4” Square, 2-Turn
B.I. (Beckman)
Bourns
Dale
3339P
BC Components
Murata
TM-7P
TM-7S
1102P (4-Turn)
1102S (4-Turn)
Spectrol
TOCOS ®
GV6P
GV6S
1/4” Square, 11-Turn
B.I. (Beckman)
Bourns
Dale
BC Components
Murata
Spectrol
TOCOS ®
64W
64X
3262W, 3266W
3262X, 3266X
T63YB
T63XB
RJ-5W, 8026EKW
RJ-5X, 8026EKX
3107W
3107X
74W
74X
RJC26W
RJC26X
3/4” Rectilinear, 15-Turn
B.I. (Beckman)
Bourns
Dale
BC Components
Murata
Spectrol
TOCOS ®
89P
89X
3006P
3006Y
T18
CT-20P
CT-20X
2103P
2103Y
43P
43Y
RJC097P
RJC097X
This Cross Reference Guide does not infer exact interchangeability in all instances. For further information concerning
product substitutes, contact Tocos at 847-884-6664 or your Tocos representative.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
7
E-mail: [email protected]
www.tocos.com
TOCOS
®
G3 Series
POTENTIOMETERS
3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
Features
3mm square SMD, single-turn, sealed cermet trimmers Available in J-hook and gull-wing terminal configurations
Top adjustment in single-slot or automatic adjust cross-slot design Wide temperature range of 55C to 125C
Designed for flow, reflow or infrared reflow soldering Sealed to withstand immersion cleaning processes
Tape and reel packaging Meets EIA, EIAJ, IPC, VECI standard SMD trimmer designs
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 50Ω to 2MΩ
(standard 1, 2 & 5 sequence)
Resistance Tolerance . . . . . . . . . . . . . . . . . 20% standard
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 2% or 3Ω, whichever is greater
Power Rating . . . . . . 0.125 watt at 70C; 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . 55C, 0.125 watt, 1 hour
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . 70C, 0.125 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Maximum Input Voltage . . . . . . . . 200VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . .100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Insulation Resistance . . . . . . . 100MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 22010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 25010
Shaft Torque . . . . . . . . . . . . . . . 50 gf • cm (0.69 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.068g
Marking . . . . . . . . . . . . Resistance value or code, date code
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.125 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.125 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . 240C, 10 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . .100 cycles without discontinuity, no load
∆T/R )5%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
8
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G3 Series
Dimensions
G3A J-Hook, Single-Slot, Top Adjust
Unit: mm
2.0
0.3
3.40.3
1.95
0.3,0
#2
2
1.0
0.05
0.15
0
2.2
3.2
0.3
0.3
3
42
#3
#1
0.60.3
3.5
0.3
0.85
0.15
SLOT
0.55W1.5L0.4D
2.25
0.3
G31A J-Hook, Cross-Slot, Automatic Top Adjust
2.0
0.3
3.40.3
1.95
0.3,0
#2
2
1.0
0.05
0.15
0
2.2
3.2
0.3
0.3
3
49
#3
#1
0.60.3
3.5
0.3
0.85
0.15
2.25
0.3
G3B Gull-Wing, Single-Slot, Top Adjust
2.0
0.3
3.40.3
1.95
#2
0.3,0
2
1.0
0.15
0.05
0
2.2
3.2
0.3
0.3
3
4.4
0.3
42
#3
#1
0.60.3
0.85
0.15
SLOT
0.55W1.5L0.4D
2.25
0.3
G31B Gull-Wing, Cross-Slot, Automatic Top Adjust
2.0
0.3
3.40.3
1.95
#2
0.3,0
2
1.0
0.15
0.05
0
2.2
3.2
0.3
0.3
3
4.4
0.3
49
#3
#1
0.60.3
0.85
0.15
2.25
0.3
Cross-Slot Dimensions
Electrical Schematic
All G31 Models
Unit: mm
1.5
clockwise
0.6
ccw #1
0.4
Ø 0.85
1.31
#3 cw
#2
wiper
0.45
0.1
0.5
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
9
E-mail: [email protected]
www.tocos.com
G3 Series
Soldering Guidelines
Recommended Land Patterns
Unit: mm
Flow Soldering Method
G3A & G31A
G3B & G31B
1.8
1.8
1.6
2.3
#2
#1
#3
R 1.4
1.0
1.0
#2
5.7
1.0
6.6
R 1.4
#1
#3
1.0
2.1
2.3
1.2
0.8
1.2
3.2
1.2
0.8
1.2
3.2
Reflow Soldering Method
G3A & G31A
G3B & G31B
1.6
1.6
1.5
2.2
#2
0.9
4.6
#1
#3
#2
0.9
1.0
6.0
#1
#3
1.2
1.0
1.9
1.2
0.8
1.2
3.2
1.2
0.8
1.2
3.2
Recommended Soldering Profiles
Flow Soldering Profile
Reflow Soldering Profile
TP*240°C Max.
TP 260°C Max.
240
TM 180°C
Solder Melting Temp.
200
ts.*3~4 sec.
Solder
Melting Time
150
100
Temperature (°C)
Temperature (°C)
250
TM 180°C
Solder Melting Temp.
200
150
ts.*10 sec.
Solder
Melting Time
100
Pre-Heat Zone
Pre-Heat Zone
50
1
2
Time (min.)
50
3
4
1
2
Time (min.)
3
4
TOCOS AMERICA, INC.
10
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G3 Series
Tape & Reel Specifications
Embossed Tape Dimensions
Unit: mm
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
G3AT, G31AT, G3BT, G31BT
8.00.1
2.00.05
4.00.1
Ø1.5
0.1,0
1.750.1
0.30.05
5.5
0.05
12.00.2
5.2 3.65
0.1
2.6
Ø1.60.1
Direction of Feed
4.90.1
0.1
0.1
3.9
0.1
1.3
0.1
3.6
0.1
Reel Dimensions
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
G3AT, G31AT, G3BT, G31BT
13.00.3
2.00.5
Ø13.00.5
Ø 21.00.8
Ø 60.01.0,0
Ø178.02.0
15.41.0
500 Pieces Per 7” Reel
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
11
E-mail: [email protected]
www.tocos.com
G3 Series
G3
1
A
Part Numbering System
T
B
105
M
Resistance Tolerance: M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; Blank = Bulk.
Terminal Style: A = J-Hook; B = Gull-Wing.
Adjustment Slot: 1 = Cross-Slot Automatic Adjust; Blank = Single-Slot.
TOCOS Series Name.
Part Numbers
Resistance Tolerance 20%
Nominal Resistance
Value ( Ω )
Catalog No.
Tape & Reel
Code
Catalog No.
Bulk
Potentiometer
Styles
G3A J-Hook, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
G3AT
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
G3A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G3A
G31A J-Hook, Cross-Slot, Automatic Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
G31AT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
G31A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G31A
TOCOS AMERICA, INC.
12
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G3 Series
Part Numbers
Resistance Tolerance 20%
Nominal Resistance
Value ( Ω )
Code
Catalog No.
Tape & Reel
Catalog No.
Bulk
Potentiometer
Styles
G3B Gull-Wing, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
G3BT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
G3B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G3B
G31B Gull-Wing, Cross-Slot, Automatic Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
G31BT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
G31B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G31B
Packaging
Standard:
Tape & Reel Packaging
Bulk Packaging
500 pieces per 7” reel.
100 pieces per vinyl bag.
1,000 pieces per box.
Cleaning Guidelines
For cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
13
E-mail: [email protected]
www.tocos.com
TOCOS
®
G4 Series
POTENTIOMETERS
4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
Features
4mm square SMD, single-turn, sealed cermet trimmers Available in J-hook and gull-wing terminal configurations
Top, side and bottom adjustment in single-slot or automatic adjust cross-slot design Tape and reel packaging
High setting accuracy, zero backlash Meets EIA, EIAJ, IPC, VECI standard SMD trimmer designs
Designed for flow, reflow or infrared reflow soldering Sealed to withstand immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 50Ω to 2MΩ
(standard 1, 2 & 5 sequence)
Resistance Tolerance . . . . . . . . . . . . . . . . . 20% standard
10% optional for 100Ω to 1MΩ
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 2% or 3Ω, whichever is greater
Power Rating . . . . . . . 0.25 watt at 70C; 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . . . . . . 55C, 0.25 watt,
45 minutes
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . . 70C, 0.25 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Maximum Input Voltage . . . . . . . . 200VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Insulation Resistance . . . . . . . 100MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 20010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 24010
Shaft Torque . . . . . . . . . . . . . . . 150 gf • cm (2.08 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 300 gf • cm (4.16 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.25 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.25 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . 260C, 10 seconds
∆T/R )1%
Nominal Weight . . . . . . . . . . . . . . . . . . . . . 0.14g (A, B, D, E)
0.16g (BF); 0.24g (SA)
Seal Test . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Marking . . . . . . . . . . . . Resistance value or code, date code
Rotational Life . . . .100 cycles without discontinuity, no load
∆T/R )5%
For through-hole models of the G4 series,
refer to the G4C Series on page 29.
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
14
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G4 Series
Standard and Reverse Markings
All A, B, D & E Models
Standard Markings
Reverse Markings
Position of Rotor Inside
Outside Positions
Outside Positions
#1
#3
#1
#3
#2
#2
G4A & G4B
G4D & G4E
#2
Position of the rotor inside is the
same for both types of markings.
#1
#3
The D and E reverse markings models have the same parts and are constructed the same as the A and B models respectively.
The only difference is the outside markings.
Dimensions
G4A J-Hook, Single-Slot, Top Adjust
G41A J-Hook, Cross-Slot, Top Adjust
2.7
2.7
0.3,0
0.3,0
5.00.3
#2
Unit: mm
5.00.3
#2
1.2
1.2
0.15
1.2
1.2
0.15
51
51
4.5
2.7
0.3
0.3
503
51
2.7
0.3
51
0.10.05
0.15
0.2
#1
#3
0.10.05
0.15
0.8 (2)
0.15
SLOT
0.6W2.6L0.6D
5.2
0.3 0.3
503
#1
#3
4.5
5.2
0.3
0.2
0.8(2)
0.15
2.3
2.3
0.3
0.3
G4D Reverse Markings, J-Hook, Single-Slot, Top Adjust
2.7
0.3,0
5.00.3
#2
1.2
1.2
0.15
503
51
4.5
2.7
0.3
5.2
0.3 0.3
51
#3
0.2
#1
0.10.05
0.15
0.8 (2)
0.15
SLOT
0.6 W2.6 L0.6D
G4SA J-Hook, Single-Slot, Side Adjust
5.00.3
2.3
0.3
G41SA J-Hook, Cross-Slot, Side Adjust
5.00.3
4.5
4.5
0.3
0.3
51
51
5.7
5.7
0.3
0.3
503
51
3.5
0.3
503
0.7
51
3.5
0.3
0.7
1.1
1.1
0.1
SLOT
0.6 W2.6 L0.6D
0.1
5.2
5.2
0.5
0.5
2.5
2.5
0.3
0.3
0.450.15 (2)
0.450.15 (2)
#1
#1
#3
0.9
0.9
0.3
0.3
#3
#2
#2
0.60.15
0.60.15
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
15
E-mail: [email protected]
www.tocos.com
G4 Series
Dimensions
G4B Gull-Wing, Single-Slot, Top Adjust
G41B Gull-Wing, Cross-Slot, Top Adjust
2.7
2.7
0.3,0
5.00.3
#2
0.10.05
0.15
1.2
Unit: mm
0.3,0
5.00.3
#2
1.2
0.15
0.10.05
0.15
1.2
1.0
1.2
0.15
1.0
51
51
4.5
4.5
6.5
0.3
503
51
6.5
0.3
0.3
0.2
0.3
503
51
0.2
1.0
#3
1.0
#1
#3
0.8 (2)
#1
0.8(2)
0.15
SLOT
0.6W2.6L0.6D
0.15
2.3
2.3
0.3
0.3
G4E Reverse Markings, Gull-Wing, Single-Slot, Top Adjust
2.7
0.3,0
5.00.3
#2
1.2
0.10.05
0.15
1.2
0.15
1.0
503
51
4.5
6.5
0.3
0.3
0.2
51
1.0
#3
#1
0.8 (2)
0.15
SLOT
0.6 W2.6 L0.6D
G4BF Gull-Wing, Single-Slot, Bottom Adjust
0.6
G41BF Gull-Wing, Cross-Slot, Bottom Adjust
2.7
1.2
5.00.3
#2
0.15
1.3
51
0.5
4.5
6.7
0.3
0.5
0.5
0.2
#1
503
0.8 (2)
0.6
#3
0.2
51
#1
0.15
SLOT
0.6W2.6L0.6D
0.15
0.5
0.5
#3
1.2
1.3
6.7
0.3
51
0.3,0
0.6
4.5
0.5
503
2.7
0.50.2
0.3,0
51
0.50.2
5.00.3
#2
2.3
0.3
0.8(2)
0.6
0.15
2.3
2.3
0.3
0.3
Cross-Slot Dimensions
All G41 Models
Electrical Schematic
Unit: mm
clockwise
1.9
ccw #1
2.3
#3 cw
0.55
#2
wiper
0.55D
TOCOS AMERICA, INC.
16
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G4 Series
Soldering
Guidelines
Dimensions
Recommended Land Patterns
Unit: mm
Flow Soldering Method
G4A, G41A, G4D
G4B, G41B, G4E
G4SA, G41SA
2.0
2.0
2.0
1.9
2.2
2.2
#2
2.1
#2
#2
1.2
1.2
8.0
6.8
6.8
1.2
1.2
#1
#3
#1
#3
2.1
#1
#3
2.2
2.2
1.9
1.5
1.0
1.5
1.5
1.5
4.0
1.5
1.0
1.5
1.0
4.0
4.0
Reflow Soldering Method
G4A, G41A, G4D
G4B, G41B, G4E
G4BF
G4SA, G41SA
1.6
1.6
1.6
1.6
1.4
1.45
#2
1.75
1.75
#2
2.6
2.3
#2
#2
1.15
1.15
8.0
7.5
5.8
5.8
1.15
1.15
#1
#3
#1
#3
2.3
2.6
Ø 2.8
1.75
#1
#3
1.75
#1
#3
1.45
1.4
1.2
1.1
1.2
1.2
3.5
1.2
1.1
1.2
1.2
3.5
1.1
1.2
1.1
3.5
1.2
3.5
Recommended Soldering Profiles
Flow Soldering Profile
Reflow Soldering Profile
TP*260°C Max.
TP 260°C Max.
250
TM 180°C
Solder Melting Temp.
200
ts.*10 sec.
Solder
Melting Time
150
100
Temperature (°C)
Temperature (°C)
250
TM 180°C
Solder Melting Temp.
200
ts.*15~20 sec.
Solder
Melting Time
150
100
Pre-Heat Zone
Pre-Heat Zone
50
1
2
Time (min.)
50
3
4
1
2
Time (min.)
3
4
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
17
E-mail: [email protected]
www.tocos.com
G4 Series
Tape & Reel Specifications
Embossed Tape Dimensions
Unit: mm
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
G4AT, G41AT, G4DT, G4BT, G41BT, G4ET
8.00.1
2.00.05
4.00.1
Ø1.5
1.750.1
0.1,0
0.30.05
5.5
0.05
51
12.00.2
7.2
0.1
503
3.75
4.9
0.1
51
Ø1.60.1
0.1
3.1
0.1
3.3
5.4
0.1
0.1
Direction of Feed
G4SAT, G41SAT
8.00.1
2.00.05
4.00.1
Ø1.5
1.750.1
0.1,0
0.40.05
5.5
0.05
12.00.2
7.0
3.6
6.1
0.1
51
Ø1.60.1
5.2
6.3
5.2
0.1
Direction of Feed
503
51
Reel Dimensions
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
G4AT, G41AT, G4DT, G4BT, G41BT, G4ET
G4SAT, G41SAT
13.50.5
13.00.3
2.00.5
2.00.5
Ø13.00.5
Ø 21.00.8
Ø13.00.5
Ø 21.00.8
Ø 85.01.0
Ø 60.01.0,0
Ø178.02.0
15.41.0
500 Pieces Per 7” Reel
Ø 254.01.0
17.51.0
750 Pieces Per 10” Reel
TOCOS AMERICA, INC.
18
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G4 Series
G4
1
A
Part Numbering System
T
B
102
M
Resistance Tolerance: M = 20% standard; K = 10% optional for 100Ω to 1MΩ.
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; Blank = Bulk.
Terminal Style: A, D, SA = J-Hook; B, BF, E = Gull-Wing.
Adjustment Slot: 1 = Cross-Slot Automatic Adjust; Blank = Single-Slot.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Catalog No.
Bulk
Resistance Tolerance 20%
Catalog No.
Tape & Reel
Catalog No.
Bulk
Potentiometer
Styles
G4A J-Hook, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
B
B
B
B
B
B
B
B
B
B
B
B
B
—
101
201
501
102
202
502
103
203
503
104
204
504
105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
G4AT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
G4A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4A
G41A J-Hook, Cross-Slot, Automatic Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
G41AT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
G41A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41A
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
19
E-mail: [email protected]
www.tocos.com
G4 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Catalog No.
Bulk
Resistance Tolerance 20%
Catalog No.
Tape & Reel
Catalog No.
Bulk
Potentiometer
Styles
G4D Reverse Markings, J-Hook, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
B
B
B
B
B
B
B
B
B
B
B
B
B
—
101
201
501
102
202
502
103
203
503
104
204
504
105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
G4DT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
G4D
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4D
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
B
B
B
B
B
B
B
B
B
B
B
B
B
—
101
201
501
102
202
502
103
203
503
104
204
504
105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
G4B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4B
G4B Gull-Wing, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
G4BT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41B Gull-Wing, Cross-Slot, Automatic Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
G41BT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
G41B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41B
TOCOS AMERICA, INC.
20
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G4 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Reel
Catalog No.
Bulk
Potentiometer
Styles
G4E Reverse Markings, Gull-Wing, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
B
B
B
B
B
B
B
B
B
B
B
B
B
—
101
201
501
102
202
502
103
203
503
104
204
504
105
—
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
G4ET
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
G4E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4E
G4SA J-Hook, Single-Slot, Side Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
G4SAT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
G4SA
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4SA
G41SA J-Hook, Cross-Slot, Automatic Side Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
—
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
G41SAT B
—
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
G41SAT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
G41SA
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41SA
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
21
E-mail: [email protected]
www.tocos.com
G4 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Reel
Catalog No.
Bulk
Potentiometer
Styles
G4BF Gull-Wing, Single-Slot, Bottom Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
K
K
K
K
K
K
K
K
K
K
K
K
K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
G4BF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4BF
G41BF Gull-Wing, Cross-Slot, Automatic Bottom Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
G41BF
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G41BF
Packaging
Standard:
Tape & Reel Packaging
Bulk Packaging
G4AT, G41AT, G4DT, G4BT, G41BT, G4ET
500 pieces per 7” reel.
All G4 Models
100 pieces per vinyl bag.
1,000 pieces per box.
G4SAT, G41SAT
750 pieces per 10” reel.
Cleaning Guidelines
For cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
22
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
GV4 Series
POTENTIOMETERS
4mm Surface Mount, Multi-Turn, Sealed Cermet Trimmers
Features
4mm square SMD, multi-turn, sealed cermet trimmers Available in J-hook and gull-wing terminal configurations
Top or side adjustment, flush with housing Meets EIA, EIAJ, IPC, VECI standard SMD trimmer designs
Wide temperature range of 65C to 150C TCR = 100ppm /C; Low CRV = 1% Tape and reel packaging
Designed for flow, reflow or infrared reflow soldering Sealed to withstand immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 2MΩ
(standard 1, 2 & 5 sequence)
Temperature Range . . . . . . . . . . . . . . . . . 65C to 150C
Resistance Tolerance . . . . . . . . . . . . . . . . . 10% standard
Low Temperature Operation . . . .65C, 0.25 watt, 2 hours
∆T/R )1%, S.S. )1%
End Resistance . . . . . . . . . . 1% or 2Ω, whichever is greater
High Temperature Exposure . . . . . . . . . 150C, 250 hours
∆T/R )2%, S.S. )1%
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 3Ω, whichever is greater
Power Rating . . . . . . . 0.25 watt at 85C; 0 watt at 150C
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . . . . . . . . . . . . . 100 ppm /C
Insulation Resistance . . . . . . . 100MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . . 600VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . 12 turns2 nominal
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . 13 turns1
Shaft Torque . . . . . . . . . . . . . . . 180 gf • cm (2.49 oz • in) max.
Stop Strength . . . . . . . . . . . . . . Clutch action or wiper idles
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2g
Marking . . . . . . . . . . . . Resistance value or code, date code
Load Life . . . . . . . . . . . . . . . . 85C, 0.25 watt, 1,000 hours
∆T/R )3% or ∆R = 3Ω, S.S. )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 65C,150C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.25 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.25 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . 260C, 4 sec. in, 2 sec. out
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . 85C, Fluorinert ® for 1 minute
Rotational Life . . . 100 cycles ( ! 100Ω), 200 cycles (8100Ω)
without discontinuity, no load
∆T/R )3% or ∆R = 3Ω
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
® Fluorinert
is a registered trademark of 3M Co.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
23
E-mail: [email protected]
www.tocos.com
GV4 Series
Dimensions
GV4W J-Hook, Single-Slot, Top Adjust
Unit: mm
5.30.2
SLOT
0.5W1.5L0.5D
5.10.1
#1
#2
4.8
0.1
1.20.2
#3
Ø1.5
0.80.2
2.60.2
1.00.2
3.5
3.9
0.1
0.2
1.00.2
1.70.2
0.80.1
2.54
2.54
1.30.1
0.2
0.2
1.650.2
GV4J J-Hook, Single-Slot, Side Adjust
GV4G Gull-Wing, Single-Slot, Side Adjust
5.00.2
SLOT
0.5W1.5L0.5D
5.80.2
SLOT
0.5W1.5L0.5D
4.60.1
4.60.1
#1
#1
2.2
#2
4.8
0.2 0.1
1.20.2
1.20.2
#2
2.2
4.8
0.2 0.1
#3
#3
Ø1.5
Ø1.5
2.60.2
2.80.2
1.0
0.2
3.5
0.1
3.5
3.7
0.1
0.2
0.60.2
1.20.2
3.9
0.2
0.60.2
1.20.2
1.30.1
1.30.1
0.80.1
0.80.1
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
24
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GV4 Series
Soldering Guidelines
Recommended Land Patterns
Unit: mm
Flow or Reflow Soldering Methods
GV4W
GV4J
2.0
2.0
2.0
1.6
#2
#2
0.65
2.9
2.54
#1
#3
1.0
4.0
4.5
6.0
0.65
2.3
#3
1.0
#1
1.6
2.0
1.3
1.24
1.3
1.3
3.84
1.0
1.3
3.6
GV4G
2.0
1.3
#2
1.95
5.2
6.5
1.95
2.3
#1
#3
1.3
1.3
1.0
1.3
3.6
Recommended Soldering Profiles
Flow Soldering Profile
Reflow Soldering Profile
TP*240°C Max.
TP 260°C Max.
240
TM 180°C
Solder Melting Temp.
200
ts.*3~4 sec.
Solder
Melting Time
150
100
Temperature (°C)
Temperature (°C)
250
TM 180°C
Solder Melting Temp.
200
150
ts.*10 sec.
Solder
Melting Time
100
Pre-Heat Zone
Pre-Heat Zone
50
1
2
Time (min.)
50
3
4
1
2
Time (min.)
3
4
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
25
E-mail: [email protected]
www.tocos.com
GV4 Series
Tape & Reel Specifications
Embossed Tape Dimensions
Unit: mm
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
GV4WT
8.00.1
3.10.1
2.00.05
4.00.1
Ø1.5
1.750.1
0.1,0
5.5
0.05
12.00.2
5.7
0.1
1.6
0.2,0
Ø1.60.1
5.80.1
Direction of Feed
4.1
0.1
0.4
5.75
0.1
GV4JT, GV4GT
8.00.1
2.00.05
3.10.1
4.00.1
Ø1.5
1.750.1
0.1,0
0.4
5.5
0.05
12.00.2
6.2
6.98 4.6
0.1
0.1
1.40.1
Direction of Feed
0.1
4.2
Ø1.60.1
0.1
4.5
5.11
0.2
Reel Dimensions
Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-1009B
GV4WT
GV4JT, GV4GT
13.00.3
2.00.5
2.00.5
Ø13.00.5
Ø 21.00.8
13.00.3
Ø13.00.5
Ø 21.00.8
Ø60.01.0,0
Ø178.02.0
Ø60.01.0,0
Ø178.02.0
15.41.0
250 Pieces Per 7” Reel
15.41.0
500 Pieces Per 7” Reel
TOCOS AMERICA, INC.
26
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GV4 Series
GV4
J
T
Part Numbering System
B
102
K
Resistance Tolerance: K = 10% standard.
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; Blank = Bulk.
Terminal Style: W = J-Hook Top Adjust.
J = J-Hook Side Adjust.
G = Gull-Wing Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Maximum Input Ratings
Catalog No.
Bulk
Maximum Wiper
Maximum
Current (mA)
Input Voltage ( V )
Potentiometer
Styles
GV4W J-Hook, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
100
200
500
101
201
102
202
502
502
103
203
503
104
204
504
105
205
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
GV4WT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
GV4W
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
100.0
100.0
70.7
50.0
35.4
22.4
15.8
11.2
7.07
5.00
3.54
2.24
1.58
1.00
0.40
0.20
0.10
1.00
2.00
3.53
5.00
7.07
11.18
15.80
22.36
35.35
50.00
70.70
111.8
158.11
223.60
300.00
300.00
300.00
GV4W
100.0
100.0
70.7
50.0
35.4
22.4
15.8
11.2
7.07
5.00
3.54
2.24
1.58
1.00
0.40
0.20
0.10
1.00
2.00
3.53
5.00
7.07
11.18
15.80
22.36
35.35
50.00
70.70
111.8
158.11
223.60
300.00
300.00
300.00
GV4J
GV4J J-Hook, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
100
200
500
101
201
102
202
502
502
103
203
503
104
204
504
105
205
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
GV4JT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
GV4J
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
27
E-mail: [email protected]
www.tocos.com
GV4 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Reel
Maximum Input Ratings
Catalog No.
Bulk
Maximum Wiper
Maximum
Current (mA)
Input Voltage ( V )
Potentiometer
Styles
GV4G Gull-Wing, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
100
200
500
101
201
102
202
502
502
103
203
503
104
204
504
105
205
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
GV4GT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
GV4G
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
100.0
100.0
70.7
50.0
35.4
22.4
15.8
11.2
7.07
5.00
3.54
2.24
1.58
1.00
0.40
0.20
0.10
1.00
2.00
3.53
5.00
7.07
11.18
15.80
22.36
35.35
50.00
70.70
111.8
158.11
223.60
300.00
300.00
300.00
GV4G
Packaging
Standard:
Tape & Reel Packaging
Bulk Packaging
GV4WT
250 pieces per 7” reel.
All GV4 Models
100 pieces per vinyl bag.
1,000 pieces per box.
GV4JT, GV4GT
500 pieces per 7” reel.
Cleaning Guidelines
For cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
28
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
G4C Series
POTENTIOMETERS
4mm Square, Single-Turn, Through-Hole, Sealed Cermet Trimmers
Features
4mm square, single-turn, through-hole, sealed cermet trimmers Top and bottom single-slot adjustment
Space-saving G4 series SMD-sized units with through-hole terminals High setting accuracy, zero backlash
Wide temperature range of 55C to 125C Meets EIA, EIAJ, IPC, VECI standard SMD trimmer designs
Sealed to withstand wave soldering and immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 50Ω to 2MΩ
(standard 1, 2 & 5 sequence)
Resistance Tolerance . . . . . . . . . . . . . . . . . 20% standard
10% optional for 100Ω to 1MΩ
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 2% or 3Ω, whichever is greater
Power Rating . . . . . . . 0.25 watt at 70C; 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . . . . . . 55C, 0.25 watt,
45 minutes
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . . 70C, 0.25 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Maximum Input Voltage . . . . . . . . 200VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Insulation Resistance . . . . . . . 100MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 20010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 24010
Shaft Torque . . . . . . . . . . . . . . . 150 gf • cm (2.08 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 300 gf • cm (4.16 oz • in) min.
Flammability of Plastic Materials . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.16g
Marking . . . . . . . . . . . . Resistance value or code, date code
For surface mount models of the G4C series,
refer to the G4 Series on page 14.
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.25 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.25 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . 260C, 10 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . .100 cycles without discontinuity, no load
∆T/R )5%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
29
E-mail: [email protected]
www.tocos.com
G4C Series
Dimensions
G4C Through-Hole, C Terminal Style, Single-Slot, Top Adjust
2.7
3.5
0.3,0
5.00.3
#2
Unit: mm
1.0
1.2
51
4.5
5.0
0.3
503
51
#1
#3
0.6(3)
0.2
0.15
SLOT
0.6 W2.6 L0.6D
2.5
0.3
G4CF Through-Hole, CF Terminal Style, Single-Slot, Bottom Adjust
3.1
0.5
2.7
0.3,0
1.2
0.85
5.00.3
#2
51
4.5
6.2
6.0
0.3
503
0.3
51
#1
#3
SLOT
0.6 W2.6 L0.6D
0.2
0.6 (3)
0.85
0.15
2.5
0.3
Recommended PCB Layouts
C Pin-Out
CF Pin-Out
Unit: mm
#2
#2
5.0
max.
(3 holes)
#3
Ø 1.0
max.
(3 holes)
6.0
Ø 1.0
#1
#3
2.5
#1
Ø 2.8
2.5
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
30
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G4C Series
G4
C
B
Part Numbering System
102
M
Resistance Tolerance: M = 20% standard; K = 10% optional for 100Ω to 1MΩ.
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: C = Through-Hole, Top Adjust.
CF = Through-Hole, Bottom Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Resistance
Tolerance 20%
Potentiometer
Styles
G4C Through-Hole, C Terminal Style, Single-Slot, Top Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
G4C
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4C
G4CF Through-Hole, CF Terminal Style, Single-Slot, Bottom Adjust
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
—
B 101
B 201
B 501
B 102
B 202
B 502
B 103
B 203
B 503
B 104
B 204
B 504
B 105
—
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
G4CF
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G4CF
Packaging
Standard:
Bulk Packaging
Quantity
100 pieces per vinyl bag.
1,000 pieces per box.
Soldering and Cleaning Guidelines
The G4C trimmers are designed to withstand flow or reflow soldering methods. Refer to the Surface Mount G4 series for soldering
temperature profiles. For cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
31
E-mail: [email protected]
www.tocos.com
TOCOS
®
GF04 Series
POTENTIOMETERS
4mm Round, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
4mm round, single-turn, through-hole, sealed cermet trimmers Top and side adjust models
Compact with high 0.5 watt power rating High setting stability with precious metal multi-contacts
Low noise and low temperature coefficient Wide temperature range of 55C to 125C
Meets UL 94V-0 flammability requirements Sealed to withstand wave soldering and immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . 100Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . 2% or 3Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . 55C, 0.5 watt, 2 hours
∆T/R )3%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 100 hours
∆T/R )3%, S.S. )2%
Maximum Input Voltage . . . . . . . . 200VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )2%
Temperature Coefficient . . . 100 ppm /C, 200Ω to 500kΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 23010
Shaft Torque . . . . . . . . . . . . . . 150 gf • cm (2.08 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . 0.2g ( W, U ); 0.3g (S, V )
Marking . . . . . . . . . . . . . . . . . . . Resistance code, date code
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )2%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )5%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
32
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF04 Series
Dimensions
GF04W
GF04U
W Terminal Style, Single-Slot, Top Adjust
U Terminal Style, Single-Slot, Top Adjust
Unit: mm
Ø 4.8
Ø 4.8
Ø 2.0
Ø 2.0
0.3
0.3
0.3
0.3
Ø 2.7
Ø 2.7
0.35 Deep
0.35 Deep
SLOT
0.5W2.0L0.8D
SLOT
0.5W2.0L0.8D
0.2
0.2
Max.
Max.
4.7 Max.
7.0
1.0
Ø 0.50.1 (3)
#1
4.7 Max.
8.0
8.0
1.0
Ø 0.50.1 (3)
1.0
#3
9.0
1.0
#3
#2
10.0
1.0
#2
#1
1.0
0.2
1.8
0.2
2.5
3.5
5.0
0.3
0.3
GF04S
GF04V
S Terminal Style, Single-Slot, Side Adjust
V Terminal Style, Single-Slot, Side Adjust
6.0
Ø 4.8
Ø 2.0
0.3
0.3
Ø 2.0
2.0
0.3
6.0
Ø 4.8
0.3
0.3
2.0
0.3
Max.
Ø 2.7
Max.
Ø 2.7
6.5
0.35 Deep
6.5
0.35 Deep
0.3
4.1
SLOT
0.5W2.0L0.8D
4.1
SLOT
0.5W2.0L0.8D
0.3
Ø 0.50.1 (3)
0.3
0.3
8.0
Ø 0.50.1 (3)
1.0
5.0
1.0
9.0
1.0
10.0
1.0
#3
#2
#1
#2
#3
#1
1.80.2
2.6
0.80.3
2.5
5.0
0.3
3.5
0.3
Recommended PCB Layout
W & S Pin-Out
2.5
U & V Pin-Out
max.
(3 holes)
#1
3.5
Unit: mm
#1
#3
max.
(3 holes)
clockwise
ccw #1
5.0
#2
1.8
Ø1.0
Electrical Schematic
#2
#3
2.5
2.5
#3 cw
Ø1.0
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
33
E-mail: [email protected]
www.tocos.com
GF04 Series
GF04
W
B
Part Numbering System
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: W, U = 3-Lead Configurations, Top Adjust.
S, V = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
GF04W Through-Hole, W Terminal Style, Single-Slot, Top Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
101
201
501
102
202
502
103
203
503
104
204
504
105
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
GF04W
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
GF04W
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
GF04U
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
GF04S
GF04U Through-Hole, U Terminal Style, Single-Slot, Top Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
101
201
501
102
202
502
103
203
503
104
204
504
105
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
GF04U
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
GF04S Through-Hole, S Terminal Style, Single-Slot, Side Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
101
201
501
102
202
502
103
203
503
104
204
504
105
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
GF04S
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
TOCOS AMERICA, INC.
34
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF04 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Resistance
Tolerance 20%
Potentiometer
Styles
GF04V Through-Hole, V Terminal Style, Single-Slot, Side Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
101
201
501
102
202
502
103
203
503
104
204
504
105
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
GF04V
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
GF04V
Packaging
Standard:
Bulk Packaging
Quantity
50 pieces per vinyl bag.
500 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
35
E-mail: [email protected]
www.tocos.com
TOCOS
®
RJC06 Series
POTENTIOMETERS
1/4” Round, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” round, single-turn, through-hole, sealed cermet trimmers Top, side and bottom adjust models
10mm diameter housing for bottom adjust model High setting stability with precious metal multi-contacts
Low noise and low TC Gold flushed terminals for superior solderability and longer shelf life PC board stand-offs
Meets UL 94V-0 flammability requirements Sealed to withstand wave soldering and immersion cleaning
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )3%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )3%, S.S. )3%
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Maximum Input Voltage . . . . . . . . 250VDC or power rating,
whichever is smaller
Shock . . . . . . . . . . . . . 50G, 6ms, 6 directions, 3 times each
∆T/R )2%, S.S. )1%
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Insulation Resistance . . . . . . 100MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 24010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 25010
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )5%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )3%
Stop Strength . . . . . . . . . . . . . . 500 gf • cm (6.93 oz • in) min.
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Nominal Weight . . . . . . . . 0.5g (P, W ); 0.6g (S, X ); 1.03g (F )
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )10%
Marking . . . . . . . . . . . . . . . . . . . Resistance code, date code
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
36
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC06 Series
Dimensions
RJC06P
RJC06W
P Terminal Style, Single-Slot, Top Adjust
W Terminal Style, Single-Slot, Top Adjust
Ø 6.2
Ø 6.2
Ø 0.50.1 (3)
0.2
Unit: mm
Ø 0.50.1 (3)
0.2
#2
#2
2.5
0.8
0.3
#3
#1
#3
#1
2.5
2.5
0.3
SLOT
0.6W2.6L0.8D
0.4
0.3
4.3
SLOT
0.6W2.6L0.8D
5.0
0.3
0.4
15.0
0.5
4.3
2.0
15.0
0.5
2.0
RJC06S
RJC06X
S Terminal Style, Single-Slot, Side Adjust
X Terminal Style, Single-Slot, Side Adjust
Ø 6.2
6.0
0.2
Ø 6.2
0.5
0.3
0.3
6.0
0.2
0.5
7.70.3
7.70.3
4.50.3
4.50.3
SLOT
0.6W2.6L0.8D
SLOT
0.6W2.6L0.8D
0.4
0.2
0.4
5.01.0
Ø 0.50.1 (3)
#1
#2
#3
0.2
5.01.0
Ø 0.50.1 (3)
#3
#2
#1
1.0
2.50.2
2.50.2
5.0
5.0
0.3
1.0
0.3
6.8
6.8
0.2
0.2
RJC06F
F Terminal Style, Single-Slot, Bottom Adjust
8.0
7.2
1.0
1.0
4.4
0.7
0.3
3
#3
SLOT
0.6W2.6L0.8D
4.4
2
0.3
Ø 10.5
Max.
#2
4.4
0.3
1
#1
Ø 0.50.1 (3)
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
37
E-mail: [email protected]
www.tocos.com
RJC06 Series
Recommended PCB Layouts
P & S Pin-Out
W Pin-Out
#2
#1
Ø1.0 max.
(3 holes)
#2
#3
#1
2.5
X Pin-Out
F Pin-Out
Unit: mm
4.4
4.4
5.0
#3
#1
#1
#3
#3
2.5
Ø1.0
max.
(3 holes)
2.5
5.0
4.4
Ø3.0
2.5
Ø1.0
max.
(3 holes)
#2
Ø1.0
max.
(3 holes)
#2
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
Part Numbering System
RJC06
P
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: P, W = 3-Lead Configurations, Top Adjust.
S, X = 3-Lead Configurations, Side Adjust.
F = 3-Lead Configuration, Bottom Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
RJC06P Through-Hole, P Terminal Style, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
RJC06P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC06P
TOCOS AMERICA, INC.
38
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC06 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
RJC06W Through-Hole, W Terminal Style, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
RJC06W
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC06W
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC06S
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC06X
RJC06S Through-Hole, S Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
RJC06S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC06X Through-Hole, X Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
RJC06X
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
39
E-mail: [email protected]
www.tocos.com
RJC06 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Resistance
Tolerance 20%
Potentiometer
Styles
RJC06F Through-Hole, F Terminal Style, Single-Slot, Bottom Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
RJC06F
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC06F
Packaging
Standard:
Bulk Packaging
Quantity
50 pieces per vinyl bag.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
40
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
GF06 Series
POTENTIOMETERS
1/4’’ Square, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available
14 pin configurations including the popular 3/8” pin styles Precious metal multi-contact wiper design
Zero backlash Cross-slot design for automatic machine adjustment Meets UL 94V-0 flammability requirements
Sealed to withstand wave soldering and immersion cleaning Taping available, reel or ammo packaging
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 5MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 1Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 250VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . . . . . . . . . . . . . 100ppm /C
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 21010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 25010
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 500 gf • cm (6.93 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . . . 0.4g (P, P1, W, U)
0.68g (P2, S, S1, X, X1, U1, Y, Y1, V, V1)
Marking . . . . . . . . . Resistance code, date code, model type
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . 55C, 0.5 watt, 2 hours
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )2%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 100 cycles without discontinuity
∆T/R )(2Ω3%)
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
41
E-mail: [email protected]
www.tocos.com
GF06 Series
Dimensions
GF06P Cross-Slot, Top Adjust,
GF06P1 Cross-Slot, Top Adjust,
GF06P2 Cross-Slot, Top Adjust,
P Terminal Style
P1 Terminal Style
P2 Terminal Style
3.0
3.8
0.2
0.2
Ø 3.0
Ø 3.0
6.80.3
8.00.3
6.80.3
6.8
6.8
6.8
0.4
0.4
0.4
0.5
Max.
0.2
0.2
0.2
0.2
Ø 3.0
Unit: mm
3.0
3.8
3.0
3.8
0.5
Max.
5.50.3
0.5
Max.
5.50.3
6.50.3
0.50.2
0.5 x 0.3 (3)
0.5 x 0.3 (3)
5.01.0
0.1 0.1
5.01.0
0.1 0.1
0.5 x 0.3 (3)
5.01.0
0.1 0.1
3.4
4.0
0.2
0.6
3.4
0.2
#3
#3
2.5
5.0
0.6
2.5
0.3
0.6
2.5
0.3
#3
0.3
5.0
#2
2.5
#2
5.0
2.5
0.6
0.3
#1
#1
2.5
0.3
#2
2.5
0.3
#1
2.5
0.3
0.3
2.5
0.3
Recommended
PCB Layout
#1
#2
5.0
#3
#2
5.0
Ø1.0
max.
(3 holes)
#3
Ø1.0
max.
(3 holes)
Recommended
PCB Layout
#1
#2
5.0
max.
(3 holes)
Recommended
PCB Layout
#1
#3
Ø1.0
2.5
GF06W Cross-Slot, Top Adjust,
W Terminal Style
GF06U Cross-Slot, Top Adjust,
U† Terminal Style
0.2
Ø 3.0
Ø 3.0
8.00.3
6.80.3
6.80.3
6.8
6.8
6.8
0.4
0.4
0.4
0.5
Max.
3.0
3.8
0.2
0.2
0.2
0.2
Ø 3.0
GF06U1 Cross-Slot, Top Adjust,
U1 Terminal Style
3.0
3.8
3.0
3.8
0.2
2.5
2.5
0.5
Max.
5.50.3
0.5
Max.
5.50.3
6.50.3
0.50.2
0.5 x 0.3 (3)
5.01.0
0.1 0.1
0.5 x 0.3 (3)
0.5 x 0.3 (3)
5.01.0
0.1 0.1
3.4
2.0
0.2
0.3
2.5
0.3
5.01.0
0.1 0.1
0.90.3
#3
#3
2.5
5.0
#2
0.6
#2
2.5
0.3
#1
#3
†16mm long lead
0.3
#1
available for
U terminal style
as special option.
2.5
5.0
0.6
0.3
#2
2.5
0.3
#1
2.5
0.3
2.5
0.3
2.5
Recommended
PCB Layout
#1
#1
2.5
#2
5.0
2.5
2.5
#3
Ø1.0 max.
(3 holes)
Recommended
PCB Layout
#2
#1
2.5
#2
2.5
#3
5.0
#3
Ø1.0
max.
(3 holes)
Recommended
PCB Layout
Ø1.0
max.
(3 holes)
TOCOS AMERICA, INC.
42
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF06 Series
Dimensions
GF06Y
Unit: mm
GF06Y1
Y Terminal Style, Cross-Slot, Top Adjust
Y1 Terminal Style, Cross-Slot, Top Adjust
3.0
3.8
0.2
0.2
3.0
3.8
0.2
0.2
Ø 3.0
Ø 3.0
8.00.3
8.00.3
6.8
0.4
6.8
0.4
0.5
Max.
6.50.3
0.5
Max.
0.50.2
0.5 x 0.3 (3)
0.50.2
5.01.0
0.1 0.1
6.50.3
0.5 x 0.3 (3)
5.01.0
0.1 0.1
#3
#3
2.5
5.0
0.6
0.3
2.5
#2
0.3
5.0
2.5
0.6
0.3
#2
2.5
#1
0.3
#1
5.0
0.3
5.0
0.3
Recommended
PCB Layout
#1
#2
5.0
Recommended
PCB Layout
#1
#2
5.0
Ø1.0
max.
(3 holes)
#3
max.
(3 holes)
#3
Ø1.0
5.0
5.0
GF06S
GF06S1
S Terminal Style, Cross-Slot, Side Adjust
S1 Terminal Style, Cross-Slot, Side Adjust
0.5
Max.
0.5
Max.
Ø 3.0
8.20.4
8.20.4
Ø 3.0
4.40.4
5.20.4
5.01.0
0.5 x 0.3 (3)
5.01.0
0.5 x 0.3 (3)
0.1
0.50.1
0.50.1
0.1
0.1
0.1
6.1
0.3
6.1
0.3
2.90.3
2.90.3
#1
2.50.3
#2
2.5
0.3
#3
Recommended
PCB Layout
#3
2.5
0.3
#1
5.0
#3
2.5
0.6
6.8
0.3
max.
(3 holes)
2.5
#2
0.3
5.0
#3
0.6
6.8
Ø1.0
Recommended
PCB Layout
2.50.3
#2
#2
2.5
0.3
#1
0.3
5.0
max.
(3 holes)
#1
2.5
Ø1.0
5.0
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
43
E-mail: [email protected]
www.tocos.com
GF06 Series
Dimensions
GF06X
GF06X1
X Terminal Style, Cross-Slot, Side Adjust
X1 Terminal Style, Cross-Slot, Side Adjust
Unit: mm
0.5
Max.
0.5
Max.
Ø 3.0
8.20.4
8.20.4
Ø 3.0
4.40.4
5.20.4
5.01.0
0.5 x 0.3 (3)
5.01.0
0.5 x 0.3 (3)
0.1
0.50.1
0.50.1
0.1
0.1
0.1
6.1
0.3
6.1
0.3
2.90.3
2.90.3
#2
#2
#3
#1
2.5
0.3
2.50.3
#3
Recommended
PCB Layout
#1
2.5
Recommended
PCB Layout
2.5
0.3
2.5
0.3
2.50.3
0.3
5.0
5.0
5.0
5.0
#1
0.6
0.6
#3
#1
#3
6.8
6.8
0.3
2.5
0.3
2.5
#2
Ø1.0
max.
(3 holes)
#2
Ø1.0
max.
(3 holes)
GF06V
GF06V1
V Terminal Style, Cross-Slot, Side Adjust
V1 Terminal Style, Cross-Slot, Side Adjust
0.5
Max.
0.5
Max.
Ø 3.0
8.20.4
8.20.4
Ø 3.0
4.40.4
5.20.4
5.01.0
0.5 x 0.3 (3)
5.01.0
0.5 x 0.3 (3)
0.1
0.50.1
0.50.1
0.1
0.1
0.1
6.1
0.3
6.1
0.3
#1
#2
#3
2.90.3
#3
Recommended
PCB Layout
5.0
2.5
0.3
2.5
0.3
2.5
0.3
#1
5.0
max.
(3 holes)
#2
#3
6.8
0.3
2.5
Recommended
PCB Layout
5.0
2.5
#3
5.0
max.
(3 holes)
6.8
Rotor and Slot Dimensions
#2
#1
2.5
2.5
Ø1.0
0.3
2.5
All GF06 Models
2.90.3
0.3
0.6
Ø1.0
0.6
#1
#2
Electrical Schematic
Unit: mm
clockwise
Ø 3.0
1.5
0.1
0.1
1.0
ccw #1
2.2
0.1
#3 cw
0.60.05
0.680.05
#2
wiper
0.50.1,0.0
2.50.1
TOCOS AMERICA, INC.
44
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF06 Series
Tape, Reel & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468-B and JIS-C-0805
3.4
0.2
UT & UT2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
0.5
Max.
5.5
0.3
0.5 x 0.3 (3)
0.1
0.1
#1 #2 #3
1.0
Max.
16.0
20.0
1.0
0,2.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
2.90.3
VT & VT2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
8.2
0.4
0.5 x 0.3 (3)
0.1
0.1
#1 #2 #3
1.0
Max.
16.0
20.0
1.0
0,2.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
Reel Dimensions
Ammo Box Dimensions
Conforms to EIA-468-B and JIS-C-0805
Conforms to EIA-468-B and JIS-C-0805
UT & VT
UT2 & VT2
43.0
2.0
325.0
1,000 Pieces
Per 14.3” Reel
First Terminal is #3
3
1,000
Pieces
Per Box
Ø 30.01.0
Ø 79.0
310.0
1.0
First Terminal is #1
Ø 363.0
Max.
39mm minimum
leader at both ends
1
43.0
52.0
1.0
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
45
E-mail: [email protected]
www.tocos.com
GF06 Series
GF06
P1
T2
Part Numbering System
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; T2 = Tape & Ammo Box; Blank = Bulk.
Terminal Style: P, P1, P2, W, U,* U1, Y, Y1 = 3-Lead Configurations, Top Adjust.
S, S1, X, X1, V, V1 = 3-Lead Configurations, Side Adjust.
*16mm long lead available for U terminal style as special option.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF06P Through-Hole, P Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
GF06P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06P
GF06P1 Through-Hole, P1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
GF06P1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06P1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
46
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF06 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF06P2 Through-Hole, P2 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
GF06P2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06P2
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
GF06W
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06W
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
GF06U
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06U
GF06W Through-Hole, W Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06U Through-Hole, U Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
GF06UT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
GF06UT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
47
E-mail: [email protected]
www.tocos.com
GF06 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF06U1 Through-Hole, U1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
GF06U1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06U1
GF06Y Through-Hole, Y Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
GF06Y
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06Y
GF06Y1 Through-Hole, Y1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
GF06Y1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06Y1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
48
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF06 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF06S Through-Hole, S Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
GF06S
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06S
GF06S1 Through-Hole, S1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
GF06S1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06S1
GF06X Through-Hole, X Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
GF06X
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06X
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
49
E-mail: [email protected]
www.tocos.com
GF06 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF06X1 Through-Hole, X1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
GF06X1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06X1
GF06V Through-Hole, V Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF06VT B 100 K
GF06VT B 200 K
GF06VT B 500 K
GF06VT B 101 K
GF06VT B 201 K
GF06VT B 501 K
GF06VT B 102 K
GF06VT B 202 K
GF06VT B 502 K
GF06VT B 103 K
GF06VT B 203 K
GF06VT B 503 K
GF06VT B 104 K
GF06VT B 204 K
GF06VT B 504 K
GF06VT B 105 K
GF06VT B 205 K
GF06T B 505 K
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
GF06VT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
GF06V
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06V
GF06V1 Through-Hole, V1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
GF06V1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF06V1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
50
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF06 Series
Standard:
Packaging
Tape & Reel Packaging
Bulk Packaging
UT & VT
1,000 pieces per 14.3” reel.
All GF063 Models
50 pieces per vinyl bag.
500 pieces per box.
Tape & Ammo Packaging
UT2 & VT2
1,000 pieces per ammo box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
51
E-mail: [email protected]
www.tocos.com
TOCOS
®
GF063 Series
POTENTIOMETERS
1/4’’ Square, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available
Larger diameter rotor than GF06 series for easier adjustment Precious metal, multi-contact wiper design
Cross-slot design allows automatic machine adjustment Meets UL 94V-0 flammability requirements
Sealed to withstand wave soldering and immersion cleaning processes Taping available, reel or ammo packaging
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 5MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 1Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 250VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . . . . . . . . . . . . . 100ppm /C
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 21010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 25010
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 500 gf • cm (6.93 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . . . 0.4g (P, P1, W, U)
0.5g (P2, S, S1, X, X1, U1, Y, Y1, V, V1)
Marking . . . . . . . . . Resistance code, date code, model type
For GF063 models available with a knob,
refer to the GF063-K Series on page 64.
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . 55C, 0.5 watt, 2 hours
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )2%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 100 cycles without discontinuity
∆T/R )(2Ω3%)
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
52
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Dimensions
GF063P Cross-Slot, Top Adjust,
P Terminal Style
GF063P1 Cross-Slot, Top Adjust,
P1, P1-3* & P1-LM* Terminal Styles
GF063P2 Cross-Slot, Top Adjust,
P2 Terminal Style
Unit: mm
3.0
3.8
0.2
0.2
0.2
0.2
0.2
0.2
3.0
3.8
3.0
3.8
8.00.3
6.80.3
6.80.3
6.8
6.8
6.8
0.4
0.4
0.4
6.50.3
5.50.3
5.50.3
0.50.2
0.5 x 0.3 (3)
5.01.0
0.1 0.1
0.5 x 0.3 (3)
5.01.0
0.1 0.1
0.5 x 0.3 (3)
5.01.0
0.1 0.1
3.4
4.0
0.2
0.6
0.3
5.0
#2
0.6
2.5
0.3
GF063P1-3 with
3mm leads or
GF063P1-LM
with 6.5mm leads
available as
special options.
2.5
2.5
5.0
0.6
* Models
#3
#3
0.3
#2
2.5
0.3
#1
#1
3.4
0.2
#3
2.5
5.0
0.6
0.3
#2
2.5
0.3
#1
2.5
2.5
0.3
0.3
2.5
0.3
#1
#2
5.0
#1
Recommended
PCB Layout
#2
5.0
#3
max.
(3 holes)
max.
(3 holes)
Recommended
PCB Layout
#2
5.0
Ø1.0
max.
(3 holes)
#3
Ø1.0
#1
Recommended
PCB Layout
#3
Ø1.0
2.5
GF063W Cross-Slot, Top Adjust,
W Terminal Style
GF063U Cross-Slot, Top Adjust,
U† Terminal Style
3.0
3.8
GF063U1 Cross-Slot, Top Adjust,
U1 Terminal Style
3.0
3.8
0.2
0.2
2.5
2.5
6.80.3
3.0
3.8
0.2
0.2
0.2
0.2
6.80.3
6.8
8.00.3
6.8
0.4
6.8
0.4
0.4
5.50.3
5.50.3
6.50.3
0.50.2
0.5 x 0.3 (3)
5.01.0
0.1 0.1
0.5 x 0.3 (3)
5.01.0
0.1 0.1
5.01.0
0.5 x 0.3 (3)
0.1 0.1
3.4
2.0
0.2
0.3
2.5
0.3
0.90.3
#3
#3
2.5
5.0
#2
0.6
0.3
#2
2.5
0.3
#1
#1
†16mm long lead
available for
U terminal style
as special option.
#3
2.5
5.0
0.6
0.3
#2
2.5
0.3
#1
2.5
0.3
2.5
0.3
2.5
Recommended
PCB Layout
#1
#2
#1
2.5
5.0
2.5
2.5
#3
Ø1.0
max.
(3 holes)
Recommended
PCB Layout
#2
#1
2.5
#2
2.5
#3
5.0
#3
Recommended
PCB Layout
Ø1.0
max.
(3 holes)
Ø1.0
max.
(3 holes)
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
53
E-mail: [email protected]
www.tocos.com
GF063 Series
Dimensions
GF063Y
GF063Y1
Y Terminal Style, Cross-Slot, Top Adjust
Y1 Terminal Style, Cross-Slot, Top Adjust
Unit: mm
3.0
3.8
3.0
3.8
0.2
0.2
0.2
0.2
8.00.3
8.00.3
6.8
6.8
0.4
0.4
6.50.3
6.50.3
0.50.2
0.50.2
5.01.0
0.5 x 0.3 (3)
5.01.0
0.5 x 0.3 (3)
0.1 0.1
0.1 0.1
#3
#3
2.5
2.5
0.3
5.0
0.6
#2
0.6
2.5
0.3
0.3
5.0
#2
2.5
0.3
#1
#1
5.0
5.0
0.3
0.3
Recommended
PCB Layout
#1
#2
5.0
Recommended
PCB Layout
#1
#2
5.0
Ø1.0
max.
(3 holes)
#3
max.
(3 holes)
#3
Ø1.0
5.0
5.0
GF063S
GF063S1
S Terminal Style, Cross-Slot, Side Adjust
S1 Terminal Style, Cross-Slot, Side Adjust
8.20.4
8.20.4
4.40.4
5.20.4
0.50.1
0.50.1
0.3
0.3
0.5 x 0.3 (3)
0.1
0.1
0.5 x 0.3 (3)
0.1
5.01.0
0.1
5.01.0
0.1
0.1
1.2
1.2
6.1
0.3
6.1
2.90.3
0.3
2.90.3
#1
#3
#3
Recommended
PCB Layout
2.50.3
#2
#1
2.5
2.5
0.3
2.5
#1
0.6
6.8
Recommended
PCB Layout
2.5
0.3
#2
5.0
5.0
0.3
0.3
#2
0.3
2.50.3
#2
#3
2.5
0.6
#3
#1
2.5
6.8
max.
(3 holes)
0.3
Ø1.0
5.0
Ø1.0
max.
(3 holes)
5.0
TOCOS AMERICA, INC.
54
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Dimensions
GF063X
GF063X1
X Terminal Style, Cross-Slot, Side Adjust
X1 Terminal Style, Cross-Slot, Side Adjust
Unit: mm
8.20.4
8.20.4
4.40.4
5.20.4
0.50.1
0.50.1
0.3
0.3
0.1
0.5 x 0.3 (3)
0.1
0.1
0.5 x 0.3 (3)
0.1
5.01.0
5.01.0
0.1
0.1
1.2
1.2
6.1
0.3
6.1
2.90.3
0.3
2.90.3
#2
#2
#3
#1
#3
2.50.3
Recommended
PCB Layout
2.5
2.5
0.3
2.5
0.3
2.50.3
#1
Recommended
PCB Layout
0.3
5.0
2.5
0.3
5.0
5.0
0.6
5.0
#1
0.6
#3
6.8
6.8
0.3
2.5
0.3
2.5
#2
Ø1.0
max.
(3 holes)
#1
#3
#2
Ø1.0
max.
(3 holes)
GF063V
GF063V1
V & V-3* Terminal Styles, Cross-Slot, Side Adjust
V1 Terminal Style, Cross-Slot, Side Adjust
8.20.4
8.20.4
4.40.4
5.20.4
0.3
0.3
0.1
0.5 x 0.3 (3)
0.1
0.50.1
0.50.1
0.1
0.5 x 0.3 (3)
5.01.0
0.1
0.1
5.01.0
0.1
1.2
1.2
6.1
0.3
6.1
0.3
#1
#2
#3
#3
2.90.3
2.90.3
#1
#2
Recommended
PCB Layout
2.5
0.3
Recommended
PCB Layout
2.5
0.3
2.5
0.3
5.0
5.0
#1
0.6
#2
2.5
0.3
5.0
5.0
0.6
#3
#3
#2
#1
2.5
2.5
6.8
6.8
max.
(3 holes)
0.3
Ø1.0
0.3
2.5
Ø1.0
max.
(3 holes)
2.5
*GF063V-3 with shorter 3mm leads available as special option.
Rotor and Slot Dimensions
All GF063 Models
Electrical Schematic
Unit: mm
clockwise
1.7
1.5
0.1
ccw #1
Ø 3.0
#3 cw
1.0
Ø 3.50.1
0.1
0.60.05
#2
wiper
0.650.05
2.2
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
55
E-mail: [email protected]
www.tocos.com
GF063 Series
Tape, Reel & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468-B and JIS-C-0805
PT, PT2, P1T, P1T2
4.0
3.4
0.6
1.3 Max.
0.2
2.0 Max.
1.3 Max.
2.0 Max.
2.0 Max.
2.0 Max.
PT & PT2
P1T & P1T2
5.5
0.3
0.1
#1
#2
#3
1.0
2.50.3
2.50.3
Max.
16.0
18.0
3.00.5
3.00.5
0.5 x 0.3 (3)
0.1
1.0
2.0,0
15.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
UT, UT2
3.4
0.2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
5.5
0.3
0.5 x 0.3 (3)
0.1
0.1
#1 #2 #3
1.0
Max.
16.0
18.0
1.0
2.0,0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
ST, ST2, XT2 ( XT not available)
2.90.3
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
8.2
0.4
3.00.5
0.5 x 0.3 (3)
0.1
0.1
#1
#2
#3
1.0
2.50.3
Max.
16.0
18.0
1.0
2.0,0
15.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
TOCOS AMERICA, INC.
56
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Tape, Reel & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468-B and JIS-C-0805
2.90.3
S1T, S1T2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
8.2
0.4
3.00.5
0.5 x 0.3 (3)
0.1
0.1
#3
#2
#1
1.0
18.0
2.50.3
Max.
16.0
1.0
2.0,0
15.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
5.4
0.3
X1T2 ( X1T not available)
1.3 Max.
2.0
1.3 Max.
Max.
2.0 Max.
8.2
0.4
3.00.5
0.5 x 0.3 (3)
0.1
0.1
#3
#2
#1
1.0
2.50.3
Max.
16.0
18.0
1.0
2.0,0
15.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
12.70.3
VT, VT2
2.90.3
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
8.2
0.4
0.5 x 0.3 (3)
0.1
0.1
#1 #2 #3
1.0
Max.
16.0
18.0
1.0
2.0,0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
57
E-mail: [email protected]
www.tocos.com
GF063 Series
Tape, Reel & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468-B and JIS-C-0805
2.90.3
V1T, V1T2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
8.2
0.4
0.5 x 0.3 (3)
0.1
0.1
#3 #2 #1
1.0
Max.
16.0
18.0
1.0
2.0,0
15.0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
Reel Dimensions
Ammo Box Dimensions
Conforms to EIA-468-B and JIS-C-0805
Conforms to EIA-468-B and JIS-C-0805
PT, P1T, UT, ST, S1T, VT, V1T
PT2, P1T2, UT2, ST2, S1T2, XT2, X1T2, VT2, V1T2
43.0
2.0
1,000 Pieces
Per 14.3” Reel
325.0
First Terminal is #3
3
1,000
Pieces
Per Box
Ø 30.01.0
Ø 79.0
1.0
310.0
First Terminal is #1
Ø 363.0
Max.
52.0
39mm minimum
leader at both ends
1
43.0
1.0
Part Numbering System
GF063
P1
T2
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; T2 = Tape & Ammo Box; Blank = Bulk.
Terminal Style: P, P1, P2, W, U,* U1, Y, Y1 = 3-Lead Configurations, Top Adjust.
S, S1, X, X1, V, V1 = 3-Lead Configurations, Side Adjust.
P1-3 = Special Option, 3mm Leads, Top Adjust.
P1-LM = Special Option, 6.5mm Leads, Top Adjust.
V-3 = Special Option, 3mm Leads, Side Adjust.
*16mm long lead available for U terminal style as special option.
TOCOS Series Name.
TOCOS AMERICA, INC.
58
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF063P Through-Hole, P Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
GF063PT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
GF063PT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
GF063P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P
GF063P1 Through-Hole, P1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
GF063P1T
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
GF063P1T2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
GF063P1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P1
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
GF063P2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P2
GF063P2 Through-Hole, P2 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
59
E-mail: [email protected]
www.tocos.com
GF063 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF063W Through-Hole, W Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
GF063W
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063W
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
GF063U
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063U
GF063U Through-Hole, U Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
GF063UT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
GF063UT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063U1 Through-Hole, U1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
GF063U1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063U1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
60
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF063Y Through-Hole, Y Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
GF063Y
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063Y
GF063Y1 Through-Hole, Y1 Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
GF063Y1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063Y1
GF063S Through-Hole, S Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
GF063ST
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
GF063ST2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
GF063S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063S
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
61
E-mail: [email protected]
www.tocos.com
GF063 Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF063S1 Through-Hole, S1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
GF063S1T
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
GF063S1T2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
GF063S1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063S1
GF063X Through-Hole, X Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
GF063XT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
GF063X
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063X
GF063X1 Through-Hole, X1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
GF063X1T2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
GF063X1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063X1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
62
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063 Series
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
Nominal Resistance
Value ( Ω )
Code
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GF063V Through-Hole, V Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
GF063VT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
GF063VT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
GF063V
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063V
GF063V1 Through-Hole, V1 Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
GF063V1T
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
GF063V1T2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
GF063V1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063V1
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
Packaging
Standard:
Tape & Reel Packaging
Bulk Packaging
PT, P1T, UT, ST, S1T, VT, V1T
1,000 pieces per 14.3” reel.
All GF063 Models
50 pieces per vinyl bag.
500 pieces per box.
Tape & Ammo Packaging
PT2, P1T2, UT2, ST2, S1T2, XT2, X1T2, VT2, V1T2
1,000 pieces per ammo box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
63
E-mail: [email protected]
www.tocos.com
GF063-K Series with Knob TOCOS
®
POTENTIOMETERS
1/4’’ Square, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available
Knob on all models for convenient fingertip adjustment Same design and housing sizes as GF063 series
Precious metal, multi-contact wiper design Meets UL 94V-0 flammability requirements
Sealed to withstand immersion cleaning processes Tape and ammo box available for PK, P1K and UK models
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 5MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 1Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 250VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . . . . . . . . . . . . . 100ppm /C
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 21010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 25010
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 500 gf • cm (6.93 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . 0.54g (PK, P1K, WK, UK )
0.64g (SK, S1K, XK, X1K, VK, V1K )
Marking . . . . . . . . . Resistance code, date code, model type
All GF063-K models are available without knobs.
Refer to GF063 Series on page 52.
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . 55C, 0.5 watt, 2 hours
∆T/R )2%, S.S. )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )2%
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )3%, S.S. )2%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )2%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 100 cycles without discontinuity
∆T/R )(2Ω3%)
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
64
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063-K Series
Dimensions
GF063PK
Unit: mm
GF063P1K
P Terminal Style, Top Adjust Knob
P1 Terminal Style, Top Adjust Knob
3.0
3.8
3.0
3.8
0.2
0.2
0.2
0.2
6.80.3
6.80.3
6.8
6.8
0.4
0.4
0.5 x 0.3 (3)
5.00.5
5.00.5
5.50.3
5.50.3
0.5 x 0.3 (3)
5.01.0
0.1 0.1
5.01.0
0.1 0.1
Recommended
PCB Layout
4.0
0.2
0.6
#1
#3
5.0
#1
#3
2.5
0.6
Recommended
PCB Layout
3.4
2.5
0.3
#2
#2
5.0
2.5
0.3
5.0
0.6
max.
(3 holes)
#2
#3
#1
Ø1.0
2.5
0.3
Ø1.0
max.
(3 holes)
2.5
2.5
0.3
GF063WK
GF063UK
W Terminal Style, Top Adjust Knob
U Terminal Style, Top Adjust Knob
3.0
3.8
0.2
0.2
6.80.3
6.80.3
6.8
6.8
0.4
0.4
5.00.5
5.00.5
5.50.3
5.50.3
5.01.0
0.5 x 0.3 (3)
0.1 0.1
0.5 x 0.3 (3)
2.0
3.4
0.3
0.3
0.2
2.5
#1
#3
#3
#1
#3
5.0
0.6
2.5
Recommended
PCB Layout
2.5
#2
#2
#1
5.01.0
0.1 0.1
Recommended
PCB Layout
2.5
2.5
3.0
3.8
0.2
0.2
#2
5.0
2.5
0.3
#3
#1
0.3
Ø1.0
max.
(3 holes)
0.3
#2
#2
2.5
#3
5.0
2.5
0.3
2.5
#1
Ø1.0
max.
(3 holes)
2.5
0.3
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
65
E-mail: [email protected]
www.tocos.com
GF063-K Series
Dimensions
GF063SK
GF063S1K
S Terminal Style, Side Adjust Knob
S1 Terminal Style, Side Adjust Knob
Unit: mm
8.20.4
8.20.4
5.20.4
0.3
0.1
0.5 x 0.3 (3)
0.1
4.40.4
0.50.1
0.50.1
0.3
5.01.0
0.1
0.5 x 0.3 (3)
0.1
0.1
5.01.0
0.1
1.2
1.2
6.1
6.1
0.3
0.3
5.00.5
5.00.5
Recommended
PCB Layout
2.90.3
#1
#3
#3
#2
2.50.3
#2
#1
2.5
2.5
0.3
max.
(3 holes)
#1
#3
2.5
2.5
0.3
5.0
5.0
#2
2.50.3
2.5
Ø1.0
0.3
#1
#2
#3
Recommended
PCB Layout
2.90.3
max.
(3 holes)
2.5
Ø1.0
0.3
5.0
5.0
0.6
0.6
6.8
6.8
0.3
0.3
GF063XK
GF063X1K
X Terminal Style, Side Adjust Knob
X1 Terminal Style, Side Adjust Knob
8.20.4
8.20.4
4.40.4
5.20.4
0.3
0.3
0.5 x 0.3 (3)
0.1
0.50.1
0.50.1
0.1
0.5 x 0.3 (3)
5.01.0
0.1
0.1
0.1
5.01.0
0.1
1.2
1.2
6.1
0.3
6.1
0.3
5.00.5
5.00.5
Recommended
PCB Layout
2.90.3
2.90.3
#2
#2
#3
#1
2.50.3
0.3
#3
2.5
2.5
2.5
0.3
#1
#3
5.0
#1
2.5
Recommended
PCB Layout
0.3
2.50.3
5.0
2.5
0.3
2.5
5.0
5.0
0.6
Ø1.0
max.
(3 holes)
0.6
#2
#1
#3
6.8
Ø1.0
max.
(3 holes)
#2
0.3
6.8
0.3
TOCOS AMERICA, INC.
66
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063-K Series
Dimensions
GF063VK
GF063V1K
V Terminal Style, Side Adjust Knob
V1 Terminal Style, Side Adjust Knob
Unit: mm
8.20.4
8.20.4
5.20.4
0.50.1
0.50.1
0.3
0.3
0.1
0.5 x 0.3 (3)
0.1
4.40.4
5.01.0
0.1
0.5 x 0.3 (3)
0.1
0.1
5.01.0
0.1
1.2
1.2
6.1
6.1
0.3
0.3
5.00.5
#1
#2
#3
5.00.5
Recommended
PCB Layout
2.90.3
#3
2.90.3
#1
#2
Recommended
PCB Layout
5.0
#1
2.5
0.3
2.5
0.3
max.
(3 holes)
5.0
#2
#3
2.5
2.5
#3
Ø1.0
2.5
0.3
max.
(3 holes)
#2
#1
2.5
2.5
Ø1.0
2.5
0.3
5.0
5.0
0.6
0.6
6.8
6.8
0.3
0.3
Knob Dimensions
All GF063-K Models
Unit: mm
5.0
3.6
1.6
0.70.1
Ø 4.8
3.1
2.5
Adjustment
cross-slot
depth 2.0
3.3
5.0
1.7
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
67
E-mail: [email protected]
www.tocos.com
GF063-K Series
Tape & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468 Specifications
4.0
3.4
0.6
PKT2, P1KT2
1.3 Max.
0.2
2.0 Max.
1.3 Max.
2.0 Max.
2.0 Max.
2.0 Max.
PKT2
P1KT2
3.00.5
3.00.5
5.5
0.3
0.5 x 0.3 (3)
0.1
0.1
#1
#2
#3
1.0
18.0
2.50.3
Max.
16.0
2.50.3
1.0
2.0,0
15.0
6.0
9.0
0.3
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
0.40.1
6.35
0.4
12.70.3
UKT2
3.4
0.2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
5.5
0.3
0.5 x 0.3 (3)
0.1
0.1
#1 #2 #3
1.0
Max.
16.0
18.0
1.0
2.0,0
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
12.70.3
Ammo Box Dimensions
Conforms to EIA-468-B and JIS-C-0805
325.0
First Terminal is #3
PKT2, P1KT2, UKT2
3
1,000
Pieces
Per Box
310.0
First Terminal is #1
1
39mm minimum
leader at both ends
43.0
TOCOS AMERICA, INC.
68
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063-K Series
GF063
P1
K
T2
Part Numbering System
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T2 = Tape and Ammo Box, PK, P1K and UK Top Adjust Models.
Adjustment Knob: K = Knob.
Terminal Style: P, P1, W, U = 3-Lead Configurations, Top Adjust.
S, S1, X, X1, V, V1 = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resistance Tolerance 10%
Catalog No.
Tape & Ammo Box
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Ammo Box
Potentiometer
Styles
Catalog No.
Bulk
GF063PK Through-Hole, P Terminal Style, Top Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
GF063PKT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
GF063PK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063PK
GF063P1K Through-Hole, P1 Terminal Style, Top Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
GF063P1KT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
GF063P1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063P1K
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
69
E-mail: [email protected]
www.tocos.com
GF063-K Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Ammo Box
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Ammo Box
Potentiometer
Styles
Catalog No.
Bulk
GF063WK Through-Hole, W Terminal Style, Top Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
GF063WK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063WK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063UK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063SK
GF063UK Through-Hole, U Terminal Style, Top Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
GF063UK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
GF063UKT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063SK Through-Hole, S Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
GF063SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TOCOS AMERICA, INC.
70
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF063-K Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Ammo Box
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Ammo Box
Potentiometer
Styles
Catalog No.
Bulk
GF063S1K Through-Hole, S1 Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
GF063S1K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063S1K
GF063XK Through-Hole, X Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
GF063XK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063XK
GF063X1K Through-Hole, X1 Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
GF063X1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063X1K
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
71
E-mail: [email protected]
www.tocos.com
GF063-K Series
Nominal Resistance
Value ( Ω )
Code
Part Numbers
Resistance Tolerance 10%
Catalog No.
Tape & Ammo Box
Resistance Tolerance 20%
Catalog No.
Bulk
Catalog No.
Tape & Ammo Box
Potentiometer
Styles
Catalog No.
Bulk
GF063VK Through-Hole, V Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
GF063VK
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063VK
GF063V1K Through-Hole, V1 Terminal Style, Side Adjust Knob
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
5,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
GF063V1K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
505
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF063V1K
Packaging
Standard:
Tape & Ammo Packaging
Bulk Packaging
PKT2, P1KT2 & UT2
1,000 pieces per ammo box.
All GF063-K Models
50 pieces per vinyl bag.
500 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
72
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
GF12 Series
POTENTIOMETERS
12mm Square, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
12mm square, single-turn, through-hole, sealed cermet trimmers Stable, infinite resolution cermet element
Unique 5,000 cycle rotational life Meets UL 94V-0 flammability requirements Top and side adjust models
4 standard styles, single-slot flush rotor, 5mm or 10mm single-slot metal shaft, or 8.2mm knurled plastic shaft
Sealed to withstand wave soldering and immersion cleaning Optional 15, 20, 22, 25 or 30mm metal shafts available
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )3%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . 70C, 0.75 watt, 1,000 hours
∆T/R )3%, S.S. )1%
Power Rating . . . . . . . 0.75 watt at 70C, 0 watt at 125C
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Shock . . . . . . . . . . . . . 50G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Temperature Coefficient . . .100 ppm /C, 200Ω to 500kΩ
250 ppm /C, other values
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Peak Noise (C.R.V.) . . . . . . 2% or 3Ω, whichever is greater
Insulation Resistance . . . . . . 100MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 27010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 30010
Shaft Torque . . . . . . . . . . . . . . 300 gf • cm (4.16 oz • in) max.
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.75 watt, 500 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.75 watt, 10 cycles, 240 hours
∆T/R )3%
Stop Strength . . . . . . . . . . . . . . 1 kgf • cm (12.86 oz • in) min.
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Seal Test . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Nominal Weight . . . . . . . . . . 1.4g (P); 1.8g (S, X, R) no shaft
1.8g (P); 2.2g (S, X, R) 5mm metal shaft
2.1g (P); 2.5g (S, X, R) 10mm metal shaft
1.7g (P); 2.1g (S, X, R) with knurled plastic shaft
Rotational Life . . . . . . . . 5,000 cycles without discontinuity
∆T/R )5%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
Marking . . . . . . . . . Resistance code, date code, model type
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
73
E-mail: [email protected]
www.tocos.com
GF12 Series
Dimensions
GF12P0S
GF12P5S
No Shaft, Flush Single-Slot, Top Adjust
P Terminal Style
5mm Metal Shaft, Single-Slot, Top Adjust
P Terminal Style
Unit: mm
12.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
12.0
0.3
0.3
SLOT:
0.60.2 W
4.70.2 L
1.20.2 D
12.0
12.0
0.3
0.3
Ø 3.0
0,0.1
6.2
0.3
Ø 5.5
5.0
0.2
0.5
5.0
0.70.3 (3)
1.0
0.1
6.2
0.1
1.0 Max.
0.3
5.0
0.70.3 (3)
1.0
0.1
0.1
#3
5.0
#2
0.3
#1
#3
5.0
#2
0.3
2.5
#1
0.3
2.5
0.3
GF12P10S
GF12P8.2SK
10mm Metal Shaft, Single-Slot, Top Adjust
P Terminal Style
8.2mm Knurled Plastic Shaft, Top Adjust
P Terminal Style
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
12.0
0.3
12.0
0.3
12.0
12.0
0.3
0.3
Ø 5.0
Ø 3.0
0.5
0,0.1
8.2
0.4
10.0
0.5
Ø 5.5
0.2
6.2
0.3
6.2
1.0 Max.
0.3
5.0
0.70.3 (3)
1.0
5.0
0.1
0.70.3 (3)
1.0
0.1
0.1
0.1
#3
#3
5.0
5.0
#2
0.3
#2
0.3
#1
#1
2.5
0.3
2.5
0.3
Recommended PCB Layout
P Pin-Out
Electrical Schematic for P Models
Unit: mm
#1
#2
5.0
clockwise
ccw #1
#3 cw
#3
Ø1.2
max.
(3 holes)
2.5
#2
wiper
TOCOS AMERICA, INC.
74
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF12 Series
Dimensions
GF12S0S
GF12S5S
No Shaft, Flush Single-Slot, Side Adjust
S Terminal Style
5mm Metal Shaft, Single-Slot, Side Adjust
S Terminal Style
12.0
SLOT:
0.60.2 W
4.70.2 L
1.20.2 D
0.3
Unit: mm
12.0
7.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
0.3
14.3
7.0
0.3
14.3
0.3
0.3
8.5
0.70.3 (3)
0.1
5.0
0.5
8.5
0.3
0.3
5.0
5.0
0.70.3 (3)
1.0
0.1
#1
0.1
2.5
Ø 5.5
0.2
1.0
0.1
#3
1.0 Max.
#2
1.0
5.0
0.3
Ø 3.0
0,0.1
#1
0.3
0.3
#3
#2
2.5
1.0
5.0
0.3
0.3
0.3
GF12S10S
GF12S8.2SK
10mm Metal Shaft, Single-Slot, Side Adjust
S Terminal Style
8.2mm Knurled Plastic Shaft, Side Adjust
S Terminal Style
12.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
10.0
12.0
7.0
0.5
14.3
0.5
8.5
Ø 3.0
0.3
0,0.1
0.3
Ø 5.5
0.2
5.0
0.70.3 (3)
5.0
0.70.3 (3)
1.0
0.1
0.3
Ø 5.0
0.3
8.5
7.0
0.4
14.3
0.3
0.1
8.2
0.3
0.3
0.1
1.0
0.1
1.0 Max.
#1
#1
#3
2.5
0.3
5.0
0.3
#3
#2
#2
1.0
2.5
0.3
0.3
Recommended PCB Layout
S Pin-Out
5.0
0.3
1.0
0.3
Electrical Schematic for S Models
Unit: mm
clockwise
#2
#1
max.
(3 holes)
#3
ccw #1
2.5
#3 cw
Ø1.2
5.0
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
75
E-mail: [email protected]
www.tocos.com
GF12 Series
Dimensions
GF12X0S
GF12X5S
No Shaft, Flush Single-Slot, Side Adjust
X Terminal Style
5mm Metal Shaft, Single-Slot, Side Adjust
X Terminal Style
12.0
SLOT:
0.60.2 W
4.70.2 L
1.20.2 D
0.3
Unit: mm
12.0
7.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
0.3
14.3
7.0
0.3
14.3
0.3
0.3
8.5
0.70.3 (3)
0.1
5.0
0.5
8.5
0.3
0.3
5.0
5.0
0.70.3 (3)
1.0
0.1
0.1
Ø 3.0
0,0.1
Ø 5.5
0.2
1.0
0.1
#2
#1
2.5
1.0
5.0
0.3
1.0 Max.
#3
#2
0.3
0.3
#1
2.5
#3
1.0
5.0
0.3
0.3
0.3
GF12X10S
GF12X8.2SK
10mm Metal Shaft, Single-Slot, Side Adjust
X Terminal Style
8.2mm Knurled Plastic Shaft, Side Adjust
X Terminal Style
12.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
10.0
12.0
7.0
0.5
14.3
0.5
8.5
Ø 3.0
0.3
0,0.1
0.3
Ø 5.5
0.2
5.0
0.70.3 (3)
5.0
0.70.3 (3)
1.0
0.1
0.3
Ø 5.0
0.3
8.5
7.0
0.4
14.3
0.3
0.1
8.2
0.3
0.3
0.1
1.0
0.1
1.0 Max.
#2
#1
2.5
0.3
#2
#1
#3
1.0
5.0
2.5
0.3
0.3
0.3
Recommended PCB Layout
X Pin-Out
#3
5.0
0.3
1.0
0.3
Electrical Schematic for X Models
Unit: mm
clockwise
5.0
#1
ccw #1
#3
#3 cw
2.5
Ø1.2
max.
(3 holes)
#2
#2
wiper
TOCOS AMERICA, INC.
76
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF12 Series
Dimensions
GF12R0S
GF12R5S
No Shaft, Flush Single-Slot, Side Adjust
R Terminal Style
5mm Metal Shaft, Single-Slot, Side Adjust
R Terminal Style
12.0
SLOT:
0.60.2 W
4.70.2 L
1.20.2 D
0.3
Unit: mm
12.0
7.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
0.3
14.3
0.3
8.5
0.70.3 (3)
#1
5.0
8.5
0.3
0.3
5.0
5.0
0.70.3 (3)
1.0
0.1
0.3
0.1
Ø 3.0
0,0.1
Ø 5.5
0.2
1.0
0.1
#3
1.0 Max.
#2
1.0
5.0
0.3
0.3
5.0
#1
0.3
#3
#2
1.0
5.0
0.3
0.3
GF12R10S
GF12R8.2SK
10mm Metal Shaft, Single-Slot, Side Adjust
R Terminal Style
8.2mm Knurled Plastic Shaft, Side Adjust
R Terminal Style
12.0
SLOT:
0.60.2 W
3.00,0.1 L
1.00.2 D
0.3
10.0
12.0
7.0
0.5
8.2
0.3
0.3
14.3
Ø 3.0
0.3
0,0.1
0.5
8.5
0.3
Ø 5.5
0.2
5.0
0.70.3 (3)
5.0
0.70.3 (3)
1.0
0.1
0.3
Ø 5.0
0.3
8.5
7.0
0.4
14.3
0.3
0.1
7.0
0.3
14.3
0.3
0.1
5.0
0.5
0.1
1.0
0.1
1.0 Max.
#1
5.0
0.3
#3
5.0
5.0
0.3
1.0
R Pin-Out
#3
#2
5.0
0.3
0.3
Recommended PCB Layout
Ø1.2
clockwise
ccw #1
5.0
#1
1.0
0.3
Electrical Schematic for R Models
Unit: mm
#2
max.
(3 holes)
#1
0.3
#2
#3 cw
#3
5.0
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
77
E-mail: [email protected]
www.tocos.com
GF12 Series
GF12
P
0
S
Part Numbering System
K
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Adjustment: K = Knurled Plastic Shaft.
Blank = Flush Rotor or Metal Shafts.
Shaft Style: S = Single-Slot.
F = Flat (available upon request for metal shafts only).
Shaft Length: 0 = No Shaft, Rotor Flush with Housing.
5 = 5mm Metal Shaft.
10 = 10mm Metal Shaft.
8.2 = 8.2mm Knurled Plastic Shaft.
Note: 15, 20, 22, 25 or 30mm metal shafts available upon request.
Terminal Style: P = 3-Lead Configuration, Top Adjust.
S, X, R = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
GF12P 0S Through-Hole, P Terminal Style, No Shaft, Flush Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12P 0S
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12P 5S
GF12P 5S Through-Hole, P Terminal Style, 5mm Metal Shaft, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
TOCOS AMERICA, INC.
78
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Potentiometer
Styles
Resistance
Tolerance 20%
GF12P 10S Through-Hole, P Terminal Style, 10mm Metal Shaft, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12P 10S
GF12P 8.2SK Through-Hole, P Terminal Style, 8.2mm Knurled Plastic Shaft, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
GF12P
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12P 8.2SK
GF12S 0S Through-Hole, S Terminal Style, No Shaft, Flush Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12S 0S
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
79
E-mail: [email protected]
www.tocos.com
GF12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Potentiometer
Styles
Resistance
Tolerance 20%
GF12S 5S Through-Hole, S Terminal Style, 5mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12S 5S
GF12S 10S Through-Hole, S Terminal Style, 10mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12S 10S
GF12S 8.2SK Through-Hole, S Terminal Style, 8.2mm Knurled Plastic Shaft, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
GF12S
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12S 8.2SK
TOCOS AMERICA, INC.
80
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
GF12X 0S Through-Hole, X Terminal Style, No Shaft, Flush Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12X 0S
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12X 5S
GF12X 5S Through-Hole, X Terminal Style, 5mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12X 10S Through-Hole, X Terminal Style, 10mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12X 10S
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
81
E-mail: [email protected]
www.tocos.com
GF12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
GF12X 8.2SK Through-Hole, X Terminal Style, 8.2mm Knurled Plastic Shaft, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
GF12X
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100M
200M
500M
101M
201M
501M
102M
202M
502M
103M
203M
503M
104M
204M
504M
105M
GF12X 8.2SK
GF12R 0S Through-Hole, R Terminal Style, No Shaft, Flush Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
0S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12R 0S
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12R 5S
GF12R 5S Through-Hole, R Terminal Style, 5mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
5S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
TOCOS AMERICA, INC.
82
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
GF12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Potentiometer
Styles
Resistance
Tolerance 20%
GF12R 10S Through-Hole, R Terminal Style, 10mm Metal Shaft, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
10S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12R 10S
GF12R 8.2SK Through-Hole, R Terminal Style, 8.2mm Knurled Plastic Shaft, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
GF12R
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
8.2SK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GF12R 8.2SK
Packaging
Standard:
Bulk Packaging
Quantity
50 pieces per vinyl bag.
200 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
83
E-mail: [email protected]
www.tocos.com
TOCOS
®
G12 Series
POTENTIOMETERS
1/2” Round, Single-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/2” round, single-turn, through-hole, sealed cermet trimmers Dial markings for quick adjustment
3 standard models, top and side adjust Cross-slot adjustment flush with housing PC board stand-offs
1.0 watt power rating Low noise and low TC Wide temperature range of 55C to 125C
Meets UL 94V-0 flammability requirements Sealed to withstand wave soldering and immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . . . 1.0 watt at 70C, 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Exposure . . . . . . . . . . . . 55C, 2 hours
∆T/R )1%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . . 70C, 1.0 watt, 1,000 hours
∆T/R )3%, S.S. )1%
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Temperature Coefficient . . .100 ppm /C, 200Ω to 500kΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . . 50G, 6ms, 6 directions, 3 times each
∆T/R )2%, S.S. )1%
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 27010
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 30010
Shaft Torque . . . . . . . . . . . . . . 350 gf • cm (4.85 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 2 kgf • cm (27.73 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . . . 1.5g (P); 2.4g (S, X )
Marking . . . . . . . . Resistance code, date code, model type,
terminal identification (side adjust only)
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
1.0 watt, 500 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
1.0 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 100 cycles without discontinuity
∆T/R )2%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
84
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G12 Series
Dimensions
G12P
Unit: mm
P Terminal Style, Cross-Slot, Top Adjust
Ø 0.7
(3)
SLOT:
0.7 W
5.0 L
2.2 D
5
#2
Ø12.6
0.5
0
#1
#3
2.5
0.1
10
6.3
5.0
0.5
5.0
1.0
0.2
G12S
G12X
S Terminal Style, Cross-Slot, Side Adjust
X Terminal Style, Cross-Slot, Side Adjust
Ø12.6
Ø12.6
8.8
0.5
SLOT:
0.7 W
5.0 L
2.2 D
8.8
0.5
0.5
SLOT:
0.7 W
5.0 L
2.2 D
5
0.5
5
14.8
14.8
0.5
0
8.5
0.5
Ø 0.7
10
(3)
0.5
0.5
0.3
5.01.0
#1
0
8.5
Ø 0.7
0.3
(3)
5.01.0
#2
#3
#2
5.0
10
2.50.2
#1
1.7
2.50.2
#3
1.7
5.0
0.2
0.2
Recommended PCB Layouts
P & S Pin-Out
X Pin-Out
5.0
#2
#1
Unit: mm
#3
#1
2.5
#3
2.5
Ø1.2
max.
(3 holes)
5.0
Ø1.2
max.
(3 holes)
#2
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
85
E-mail: [email protected]
www.tocos.com
G12 Series
G12
P
B
Part Numbering System
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: P = 3-Lead Configuration, Top Adjust.
S, X = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Resistance
Tolerance 20%
Potentiometer
Styles
G12P Through-Hole, P Terminal Style, Cross-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
G12P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G12P
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G12S
G12S Through-Hole, S Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
G12S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
TOCOS AMERICA, INC.
86
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
G12 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Resistance
Tolerance 20%
Potentiometer
Styles
G12X Through-Hole, X Terminal Style, Cross-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
G12X
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
G12X
Packaging
Standard:
Bulk Packaging
Quantity
10 pieces per vinyl bag.
200 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
87
E-mail: [email protected]
www.tocos.com
TOCOS
®
RA12 Series
POTENTIOMETERS
12mm Round, Single-Turn, Through-Hole Sealed Wirewound Trimmers
Features
12mm round, single-turn, through-hole, sealed wirewound trimmers Top and side adjust styles available
Low equivalent noise resistance High setting stability Low temperature coefficient Long rotational life
Meets UL 94V-0 flammability requirements Sealed to withstand wave soldering and immersion cleaning processes
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . 10Ω to 20kΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . . . 10% standard
End Resistance . . . . . . . . 0.2% or 1Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . 0.5% or 2Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Temperature Coefficient . . . . . . . . . . . . . . . . . 50ppm /C
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 27010
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Exposure . . . . . . . . . . . . 55C, 1 hours
∆T/R )1%0.05Ω
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )1%0.05Ω
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%0.05Ω
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )2%
Mechanical
Soldering Heat Resistance . . . . . . . . . . . 350C, 5 seconds
∆T/R )1%0.05Ω
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 30010
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Shaft Torque . . . . . . . . 30 to 300 gf • cm (0.42 to 4.16 oz • in)
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )2%
Stop Strength . . . . . . . . . . . . . . 1 kgf • cm (13.86 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
Nominal Weight . . . . . . . . . . . . . . . . . . . 1.5g (P); 2.4g (S, X )
Marking . . . . . . . . . . . . . . . . . . Resistance code, date code,
model type, terminal identification
TOCOS AMERICA, INC.
88
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RA12 Series
Dimensions
RA12P
Unit: mm
P Terminal Style, Single-Slot, Top Adjust
Ø 0.7
SLOT: 0.8 W5.0 L1.6 D
(3)
501
#2
Ø12.5
1.0
#3
#1
2.5
0.1
Ø 5.0
10.0
6.0
5.0
1.0
1.0
0.2
RA12S
RA12X
S Terminal Style, Single-Slot, Side Adjust
X Terminal Style, Single-Slot, Side Adjust
Ø12.5
Ø12.5
1.0
1.0
Ø 5.0
SLOT:
0.8 W
5.0 L
1.6 D
Ø 5.0
8.5
1.0
SLOT:
0.8 W
5.0 L
1.6 D
501
8.5
1.0
501
14.75
14.75
0.5
0.5
8.5
8.5
0.5
Ø 0.7
0.5
0.3
(3)
5.01.0
Ø 2.0
#1
Ø 0.7
0.3
(3)
5.01.0
Ø 2.0
(4)
#2
#3
#2
5.0
(4)
2.50.2
#1
2.50.2
#3
1.7
1.7
5.0
0.2
0.2
Recommended PCB Layouts
P & S Pin-Out
X Pin-Out
5.0
#2
#1
Unit: mm
#3
#1
2.5
#3
2.5
Ø1.2
max.
(3 holes)
5.0
Ø1.2
max.
(3 holes)
#2
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
89
E-mail: [email protected]
www.tocos.com
RA12 Series
RA12
P
B
Part Numbering System
102
K
Resistance Tolerance: K = 10%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: P = 3-Lead Configuration, Top Adjust.
S, X = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resolution
Catalog No.
Bulk
Percent ( % )
Potentiometer
Styles
0.11
0.18
0.34
0.51
0.81
2.20
3.90
6.04
10.4
18.9
27.6
1.13
0.90
0.69
0.51
0.41
0.44
0.39
0.30
0.20
0.19
0.14
RA12P
0.11
0.18
0.34
0.51
0.81
2.20
3.90
6.04
10.4
18.9
27.6
1.13
0.90
0.69
0.51
0.41
0.44
0.39
0.30
0.20
0.19
0.14
RA12S
0.11
0.18
0.34
0.51
0.81
2.20
3.90
6.04
10.4
18.9
27.6
1.13
0.90
0.69
0.51
0.41
0.44
0.39
0.30
0.20
0.19
0.14
RA12X
Ohms ( Ω )
RA12P Through-Hole, P Terminal Style, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
100
200
500
101
201
501
102
202
502
103
203
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
RA12P
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
K
K
K
K
K
K
K
K
K
K
K
RA12S Through-Hole, S Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
100
200
500
101
201
501
102
202
502
103
203
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
RA12S
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
K
K
K
K
K
K
K
K
K
K
K
RA12X Through-Hole, X Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
100
200
500
101
201
501
102
202
502
103
203
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
RA12X
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
K
K
K
K
K
K
K
K
K
K
K
Packaging
Standard:
Bulk Packaging
Quantity
10 pieces per vinyl bag; 100 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
90
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
RJC26 Series
POTENTIOMETERS
1/4” Square, Multi-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” square, multi-turn, through-hole, sealed cermet trimmers 11-turn design for more accurate setting
State-of-the-art brush contact design Stop-clutch action at ends of element Top and side adjust models
Meets UL 94V-0 flammability requirements Sealed to withstand wave soldering and immersion cleaning
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . 100Ω to 5MΩ
(standard 1, 2 & 5 sequence
plus 3MΩ rating)
Resistance Tolerance . . . . . 10% and 20% (up to 2MΩ)
30%,20% (3MΩ and 5MΩ)
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . 2% or 3Ω, whichever is greater
Power Rating . . . . . . . 0.25 watt at 70C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . . 600VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . 8.5 turns1
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . 11 turns1
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . 55C, 0.25 watt, 1 hour
∆T/R )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . 70C, 0.25 watt, 1,000 hours
∆T/R )2%, S.S. )3%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.25 watt, 500 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.25 watt, 10 cycles, 240 hours
∆T/R )3%
Stop Strength . . . . . . . . . . . . . . . . . . . . . . . . . . Clutch action
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Nominal Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35g
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )5%
Marking . . . . . . . . . . . . . . . . . . Resistance code, date code,
model type, terminal identification
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
91
E-mail: [email protected]
www.tocos.com
RJC26 Series
Dimensions
RJC26W
RJC26X
W Terminal Style, Single-Slot, Top Adjust
X Terminal Style, Single-Slot, Side Adjust
Unit: mm
6.00.2
6.00.2
Ø1.80.2
4.30.2
4.30.2
103
501
1.150.2
Ø1.80.2
1.30.3
1.20.2
SLOT:
0.60.2 W
1.80.2 L
0.60.2 D
1.00.2
1.150.2
1.00.3
1.15 0.2
6.750.2
SLOT:
0.60.2 W
1.80.2 L
0.60.2 D
0.20.2
5.01.0
0.50.1 x 0.25(3)
#3
#2
6.750.2
0.20.2
5.01.0
0.50.1 x 0.25(3)
#3
#1
#2
#1
4.3
4.3
0.2
0.2
3.5
3.5
0.2
0.2
1.30.3
1.30.3
2.50.3
2.50.3
2.5
0.3
2.5
2.5
0.3
0.3
2.5
0.3
Recommended PCB Layout
W & X Pin-Out
Unit: mm
5.0
#1
#3
2.5
#2
Ø1.0
max.
(3 holes)
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
92
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC26 Series
RJC26
X
B
Part Numbering System
102
K
Resistance Tolerance: K = 10%; M = 20%; Blank = 30%,20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Terminal Style: W = 3-Lead Configuration, Top Adjust.
X = 3-Lead Configuration, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Catalog No. Bulk
Resistance
Tolerance 10%
Code
Resistance
Tolerance 20%
Potentiometer
Styles
RJC26W Through-Hole, W Terminal Style, Single-Slot, Top Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
3,000,000
5,000,000
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
101
201
501
102
202
502
103
203
503
104
204
504
105
205
305
505
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
205
305
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
RJC26W
(Blank = 30%,20%)
(Blank = 30%,20%)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC26W
RJC26X Through-Hole, X Terminal Style, Single-Slot, Side Adjust
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
3,000,000
5,000,000
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
RJC26X
101
201
501
102
202
502
103
203
503
104
204
504
105
205
305
505
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
101
201
501
102
202
502
103
203
503
104
204
504
105
205
305
505
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
RJC26X B
(Blank = 30%,20%)
(Blank = 30%,20%)
101
201
501
102
202
502
103
203
503
104
204
504
105
205
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC26X
Packaging
Standard:
Bulk Packaging
Quantity
50 pieces per vinyl bag.
500 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
93
E-mail: [email protected]
www.tocos.com
TOCOS
®
RJC097 Series
POTENTIOMETERS
3/4’’ Rectilinear, 15-Turn, Through-Hole, Sealed Cermet Trimmers
Features
3/4” rectilinear, 15-turn, through-hole, sealed cermet trimmers Miniature design for component density
Side adjust with single-slot standard or extended shaft Knob styles available for easier adjustment
State-of-the-art brush contact design Excellent stability and low noise PC board solderable pins
Sealed to withstand wave soldering and immersion cleaning Meets UL flammability standards
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . 0.75 watt at 70C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Temperature Coefficient . . . . 100ppm /C, 200Ω to 1MΩ
250ppm /C, other values
Insulation Resistance . . . . . 1,000MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . .153 turns
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . .153 turns
Shaft Torque . . . . . . . . . . . . . . . 300 gf • cm (4.16 oz • in) max.
Stop Strength . . . . . . . . . . . . . . . . . . . . . . . . . . Clutch action
Flammability of Plastic Materials . . UL 94V-0 for housing;
UL 94HB for knob
Nominal Weight . . . . . . . . . . . . . . . . . . . . 1.1g (P); 1.3g (PK )
1.7g (PK1 with knob attached & PK2)
Marking . . . . . . . . . . . . . . . . . . . Resistance code, date code,
model type, wiring diagram
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . . . . . . 55C, 0.75 watt,
45 minutes
∆T/R )3%, S.S. )1%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )3%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . 70C, 0.75 watt, 1,000 hours
∆T/R )3%, S.S. )3%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Shock . . . . . . . . . . . . . 50G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.75 watt, 1,000 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.75 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )3%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
94
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC097 Series
Dimensions
RJC097P
RJC097PK
Single-Slot, Short Shaft, Side Adjust
Short Shaft, Permanent Small Knob, Side Adjust
1.50.2
Unit: mm
2.6
4.7
0.3
Ø 2.80.2
0.6
4.70.3
0.60.1
(3)
0.3
0.2
0.50.2 (4)
0.40.1
(3)
12.7
5.01.0
0.30.1
6.40.4
4.70.3
0.60.1
(3)
0.3
0.2
2.50.3
3.5
0.3
5.1
0.3
2.50.3
3.5
0.3
0.3
0.5
0.5
#2
#1
5.01.0
0.30.1
19.0
19.0
4.70.3
0.50.2 (4)
0.40.1
(3)
12.7
5.1
0.3
0.3
0.3
0.60.1
0.1
6.40.4
4.7
Ø 4.70.2
0.30.1
4.70.3
#3
#2
#1
#3
18
18
RJC097PK1
RJC097PK2
Single-Slot, Extended Shaft, Side Adjust,
Removable Large Knob (same knob as PK2)
Extended Shaft, Permanent Large Knob, Side Adjust
5.3
4.7
1.0
12.0
Ø 8.8
2.0
Ø4.0
0.5
0.3
3.0
0.5
0.8
0.3
1.0
Ø 3.7
0.6
0.1
6.40.4
4.70.3
Ø 2.6
6.40.4
4.70.3
0.05
0.60.1
(3)
0.3
0.2
0.50.2 (4)
0.40.1
(3)
12.7
5.01.0
0.30.1
0.60.1
(3)
0.3
0.2
0.40.1
(3)
12.7
5.1
0.3
2.50.3
3.5
0.3
0.3
0.3
#2
5.1
0.3
2.50.3
3.5
0.3
0.5
0.5
#1
5.01.0
0.30.1
19.0
19.0
4.70.3
0.50.2 (4)
4.70.3
#3
#2
#1
Ø 6.2 Ø 6.7
#3
18
18
The knob shipped with the PK1 is the same style and size as
the PK2 knob. With the knob attached, the dimensions and
weight of PK1 are the same as the PK2 model.
Recommended PCB Layout
P, PK, PK1 & PK2 Pin-Out
Electrical Schematic
Unit: mm
clockwise
Ø1.0
max.
(3 holes)
5.0
#1
ccw #1
#3 cw
#3
2.5
#2
#2
12.7
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
95
E-mail: [email protected]
www.tocos.com
RJC097 Series
RJC097
P
K1
Part Numbering System
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Adjustment Knob: K = Permanent Small Knob, Short Shaft.
K1 = Removable Large Knob, Extended Shaft, Single-Slot.
K2 = Permanent Large Knob, Extended Shaft.
Blank = No Knob, Short Shaft, Single-Slot.
Terminal Style: P = 3 -Lead Configuration.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Potentiometer
Styles
Resistance
Tolerance 20%
RJC097P Through-Hole, P Terminal Style, Single-Slot, Short Shaft, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
RJC097P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC097P
RJC097PK Through-Hole, P Terminal Style, Short Shaft, Permanent Small Knob, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
RJC097PK
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC097PK
TOCOS AMERICA, INC.
96
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC097 Series
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Potentiometer
Styles
Resistance
Tolerance 20%
RJC097PK1 Through-Hole, P Terminal Style, Single-Slot, Extended Shaft, Removable Large Knob, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
RJC097PK1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC097PK1
RJC097PK2 Through-Hole, P Terminal Style, Extended Shaft, Permanent Large Knob, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
RJC097PK2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC097PK2
Packaging
Standard:
Bulk Packaging
Quantity
P & PK: 20 pieces per vinyl bag.
200 pieces per box.
PK1 & PK2: 10 pieces per vinyl bag.
100 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
97
E-mail: [email protected]
www.tocos.com
TOCOS
®
RJC07R Series
POTENTIOMETERS
3/4’’ Rectilinear, 13-Turn, Through-Hole, Sealed Cermet Trimmers
Features
3/4” rectilinear, 13-turn, through-hole, sealed cermet trimmers Space-saving vertical mount design
Single-slot top adjustment Knob style available for easier adjustment High performance, excellent stability
Wide operating temperature range of 55C to 125C PC board solderable pins
Sealed to withstand wave soldering and immersion cleaning Meets UL flammability standards
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
for ) 10kΩ; 2% max. for 0 20kΩ
Power Rating . . . . . . . 0.75 watt at 40C, 0 watt at 125C
Maximum Input Voltage . . . . . . . . 300VDC or power rating,
whichever is smaller
Temperature Coefficient . . . 100ppm /C, 200Ω to 500kΩ
250ppm /C, other values
Insulation Resistance . . . . . . .100MΩ minimum at 500VDC
Dielectric Strength . . . . . . . . . . . . . . . . . . 900VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . .133 turns
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . .133 turns
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )3%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . 40C, 0.75 watt, 1,000 hours
∆T/R )3%, S.S. )2%
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )2%, S.S. )1%
Shock . . . . . . . . . . . . . 50G, 6ms, 6 directions, 3 times each
∆T/R )1%, S.S. )1%
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Humidity . . . . . . . . . . . . . . . . . . . . . . . . .40C, 90-95%RH,
0.75 watt, 1,000 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.75 watt, 10 cycles, 240 hours
∆T/R )3%
Shaft Torque . . . . . . . . 7.2 to 300 gf • cm (0.10 to 4.16 oz • in)
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Stop Strength . . . . . . . . . . . . . . . . . . . . . . . . . Clutch action
Seal Test . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Flammability of Plastic Materials . . UL 94V-0 for housing;
UL 94HB for knob
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )5%
Nominal Weight . . . . . . . . . . . . . . . . . . 1.4g; 1.8g with knob
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
Marking . . . . . . . . . . . . . . . . . . Resistance code, date code,
model type, wiring diagram
TOCOS AMERICA, INC.
98
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
RJC07R Series
Dimensions
RJC07R
RJC07RK2
Single-Slot, Short Shaft, Top Adjust
Extended Shaft, Permanent Knob, Top Adjust
Unit: mm
7.0
0.5,0.2
Ø 8.8 Ø 4.0
0.3
3.5
6.60.3
Ø 6.7
Ø 6.2
5.0
Ø 2.8
0.6
0.50.2
12.0
0.5
1.0
Ø 3.7
17.5 17
2.0
0.3
17
0.8 (3)
5
#1 #2 #3
0.6
0.8 (3)
0.35 (3)
5
#1 #2 #3
0.6
5.00.5
2.50.2
0.35 (3)
5.00.5
2.50.2
2.50.2
2.50.2
Recommended PCB Layout
RJC07R & RJC07RK2 Pin-Out
Unit: mm
#2
Ø1.2
max.
(3 holes)
5.0
#1
#3
5.0
Electrical Schematic
clockwise
ccw #1
#3 cw
#2
wiper
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
99
E-mail: [email protected]
www.tocos.com
RJC07R Series
RJC07R
K2
B
Part Numbering System
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Adjustment Knob: K2 = Permanent Large Knob, Extended Shaft.
Blank = No Knob, Single-Slot, Short Shaft.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Catalog No. Bulk
Resistance
Tolerance 10%
Potentiometer
Styles
Resistance
Tolerance 20%
RJC07R Through-Hole, Single-Slot, Short Shaft, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
RJC07R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC07R
RJC07RK2 Through-Hole, Extended Shaft, Permanent Knob, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
RJC07RK2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
RJC07RK2
Packaging
Standard:
Bulk Packaging
Quantity
RJC07R: 20 pieces per vinyl bag; 200 pieces per box.
RJC07RK2: 50 pieces per vinyl bag; 200 pieces per box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
100
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: [email protected]
www.tocos.com
TOCOS
®
GV6 Series
POTENTIOMETERS
1/4” Square, Multi-Turn, Through-Hole Sealed Cermet Trimmers
Features
1/4” square, multi-turn, through-hole, sealed cermet trimmers Top and side adjust styles available
2-turn adjustment travel for quick setting Space-saving, low profile design Excellent stability and low noise
Wide temperature range of 55C to 125C Meets UL 94V-0 flammability requirements
Sealed to withstand wave soldering and immersion cleaning Taping available, reel or ammo packaging
Specifications
Electrical
Environmental
Standard Resistance Range . . . . . . . . . . . . . . 10Ω to 1MΩ
(standard 1, 2 & 5 sequence )
Resistance Tolerance . . . . . . . . . . . . . . . 10% and 20%
End Resistance . . . . . . . . . . 1% or 3Ω, whichever is greater
Resistance Taper . . . . . . . . . . . . . . . . . . . . . . . . . B = Linear
Peak Noise (C.R.V.) . . . . . . . 1% or 1Ω, whichever is greater
Power Rating . . . . . . . . 0.5 watt at 70C, 0 watt at 125C
Temperature Range . . . . . . . . . . . . . . . . . 55C to 125C
Low Temperature Operation . . . . . 55C, 0.5 watt, 1 hour
∆T/R )2%
High Temperature Exposure . . . . . . . . . 125C, 250 hours
∆T/R )2%, S.S. )1%
Load Life . . . . . . . . . . . . . . . . . 70C, 0.5 watt, 1,000 hours
∆T/R )3%, S.S. )1%
Maximum Input Voltage . . . . . . . . 250VDC or power rating,
whichever is smaller
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . 55C,125C,
30 minutes each, 5 cycles
∆T/R )1%, S.S. )1%
Temperature Coefficient . . . . 100 ppm /C, 200Ω to 1MΩ
250 ppm /C, other values
Shock . . . . . . . . . . . . 100G, 6ms, 6 directions, 3 times each
∆T/R )2%, S.S. )1%
Insulation Resistance . . . . . . 100MΩ minimum at 500VDC
Vibration . . . . . . . . . . . . . . . . 10-2,000Hz, 1.5mm amplitude,
20G, 12 hours
∆T/R )1%, S.S. )1%
Dielectric Strength . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . 2 turns (73510)
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . 2 turns (73510)
Shaft Torque . . . . . . . . . . . . . . 200 gf • cm (2.77 oz • in) max.
Stop Strength . . . . . . . . . . . . . . 300 gf • cm (4.16 oz • in) min.
Flammability of Plastic Materials . . . . . . . Meets UL 94V-0
Nominal Weight . . . . . . . . . . . . . . . . . 0.5g (P, U ); 0.6g (S, V )
Marking . . . . . . . . . . . . . . . . . . . Resistance code, date code
Humidity . . . . . . . . . . . . . . . . . . . . . . . . 40C, 90-95%RH,
0.5 watt, 500 hours
∆T/R )3%, S.S. )1%
Moisture Resistance . . . . . . 10C to 65C, 80-98%RH,
0.5 watt, 10 cycles, 240 hours
∆T/R )3%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
∆T/R )1%
Seal Test . . . . . . . . . . . . . . . . .85C, hot water for 1 minute
Rotational Life . . . . . . . . . . 200 cycles without discontinuity
∆T/R )5%
∆T/R = Total Resistance Change; S.S. = Setting Stability ( voltage ratio )
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
101
E-mail: sales@tocos.com
www.tocos.com
GV6 Series
Dimensions
GV6P
GV6U
P Terminal Style, Single-Slot, Top Adjust
U Terminal Style, Single-Slot, Top Adjust
2.00.3
SLOT
0.5W2.5L0.5D
Unit: mm
2.00.3
SLOT
0.5W2.5L0.5D
6.80.3
6.80.3
Ø2.5
6.8
Ø2.5
6.8
0.4
0.4
6.80.3
0.5 x 0.3 (3)
6.80.3
5.01.0
0.1 0.1
0.5 x 0.3 (3)
5.01.0
0.1 0.1
1.5
3.4
0.3
#3
2.5
0.3
#3
2.5
0.3
5.0
0.2
5.0
#2
0.3
2.5
0.3
0.3
#2
2.5
0.3
#1
#1
2.5
0.3
GV6S
GV6V
S Terminal Style, Single-Slot, Side Adjust
V Terminal Style, Single-Slot, Side Adjust
6.8
0.3
6.8
7.8
Ø2.5
0.3
Max.
0.3 Max.
8.20.4
6.20.4
SLOT
0.5W
2.5L
0.5D
0.50.1
Max.
0.50.1
5.01.0
0.5 x 0.3 (3)
0.1
0.1
4.10.3
#1
0.3 Max.
8.20.4
6.20.4
SLOT
0.5W
2.5L
0.5D
5.01.0
0.5 x 0.3 (3)
0.1
7.8
Ø2.5
0.1
4.10.3
#3
2.5
#1
2.50.3
#2
2.5
0.3
#2
2.5
0.3
0.3
5.0
2.5
0.3
5.0
0.3
0.3
Recommended PCB Layout
P & S Pin-Out
#3
U & V Pin-Out
Electrical Schematic
Unit: mm
clockwise
#2
#3
5.0
#1
5.0
2.5
Ø1.0 max.
(3 holes)
#1
ccw #1
#2
#3
2.5
2.5
#3 cw
Ø1.0 max.
(3 holes)
#2
wiper
TOCOS AMERICA, INC.
102
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
GV6 Series
Tape, Reel & Ammo Box Specifications
Tape Dimensions
Unit: mm
Conforms to EIA-468-B and JIS-C-0805
3.4
0.2
GV6UT & GV6UT2
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
6.8
0.3
0.5 x 0.3 (3)
#1 #2 #3
26.8
0.1
0.1
16
0.5
1.0
Max.
20.0
1.0,0.5
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
3.2
GV6VT & GV6VT2
0.3
1.3 Max.
2.0 Max.
1.3 Max.
2.0 Max.
6.8
0.3
0.5 x 0.3 (3)
#1 #2 #3
28.2
0.1
17.1
0.4
0.1
1.0
Max.
20.0
1.0,0.5
6.0
0.3
9.0
0.5
18.0
1.0,0.5
Ø 4.00.2
12.70.3
0.40.1
6.35
0.4
Direction of Reel Feed
12.70.3
Reel Dimensions
Ammo Box Dimensions
Conforms to EIA-468-B and JIS-C-0805
Conforms to EIA-468-B and JIS-C-0805
UT & VT
UT2 & VT2
43.0
2.0
1,000 Pieces
Per 14.3” Reel
325.0
First Terminal is #3
3
1,000
Pieces
Per Box
Ø 30.01.0
Ø 79.0
1.0
310.0
First Terminal is #1
Ø 363.0
Max.
52.0
39mm minimum
leader at both ends
1
43.0
1.0
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
103
E-mail: sales@tocos.com
www.tocos.com
GV6 Series
GV6
P
T
Part Numbering System
B
102
K
Resistance Tolerance: K = 10%; M = 20%
Resistance Code: Expressed in ohms. A three digit code where the first two digits
are significant figures, and the third digit indicates the number of zeros that follow
these figures (i.e., 100 = 10Ω; 101 = 100Ω; 102 = 1,000Ω; 105 = 1,000,000Ω ).
Resistance Taper: B = Linear.
Packaging: T = Tape & Reel; T2 = Tape & Ammo Box; Blank = Bulk.
Terminal Style: P, U = 3-Lead Configurations, Top Adjust.
S, V = 3-Lead Configurations, Side Adjust.
TOCOS Series Name.
Part Numbers
Nominal Resistance
Value ( Ω )
Code
Resistance Tolerance: K = 10% (see footnote for M = 20% )
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GV6P Through-Hole, P Terminal Style, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
GV6P
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6P
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
GV6U
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6U
GV6U Through-Hole, U Terminal Style, Single-Slot, Top Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
GV6UT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
GV6UT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
TOCOS AMERICA, INC.
104
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
GV6 Series
Part Numbers
Resistance Tolerance: K = 10% (see footnote for M = 20% )
Nominal Resistance
Value ( Ω )
Code
*Catalog No.*
Tape & Reel
*Catalog No.*
Tape & Ammo Box
*Catalog No.*
Bulk
Potentiometer
Styles
GV6S Through-Hole, S Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
GV6S
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6S
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
GV6V
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6V
GV6V Through-Hole, V Terminal Style, Single-Slot, Side Adjust
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
GV6VT
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
GV6VT2
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
* Substitute code letter M in place of K at end of catalog part number for 20% resistance tolerance.
Packaging
Standard:
Tape & Reel Packaging
Bulk Packaging
UT & VT
1,000 pieces per 14.3” reel.
All GV6 Models
50 pieces per vinyl bag.
500 pieces per box.
Tape & Ammo Packaging
UT2 & VT2
1,000 pieces per ammo box.
Soldering and Cleaning Guidelines
For soldering, cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
105
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Guidelines & Precautions
For Using Trimmer Potentiometers
TOCOS Trimmer Potentiometers are designed and
manufactured with emphasis on dependability and costeffectiveness. For reliable performance and general safety,
follow these guidelines and precautions for using trimmer
potentiometers when designing, manufacturing and
operating devices.
POTENTIOMETERS
wiper. Remember that the power capability is always
proportional to the amount of element in use in a rheostat
connection. If wiper current is not specified for the trimmer,
then you may safely use the current rating (not to exceed
100 mA) that produces maximum power dissipation when
applied through the element only.
Guidelines for Circuit Design
1. Terminal Arrangement. When using trimmer
potentiometers in circuit designs, be aware of the terminal
arrangement, and in which rotational direction the shaft or
rotor is turned to increase or decrease the resistance. As
shown in Figure 1, turning the shaft or rotor clockwise will
increase the resistance between the #1 and #2 terminals.
Potentiometer
Clockwise Shaft Rotation
ccw #1
Rheostat
Figure 3
5. Applied Voltage. When DC voltage is applied, local
resistance may be abnormally high depending on how the
trimmer potentiometer is connected. Always connect the
positive () current to the wiper terminal as illustrated in
Figure 4.
#3 cw
#2
wiper
Figure 1
2. Power Rating and Performance Testing. Always use
the trimmer potentiometer when testing rated performance.
Carefully check the rated power, maximum operating
voltage, operating temperature range, and other rated
performance specifications. Increase or decrease the rated
power according to the power derating curve. A typical
power derating curve is shown in Figure 2. Use a trimmer
potentiometer with sufficient allowable power rating to
maintain stable performance over a long period of time.
TOCOS recommends that the maximum working power
should not be more than one-half the rated power of the
trimmer potentiometer.
Figure 2: Example of Power Derating Curve
3. Trimmer Accessibility. During design of the board
layout, always take into consideration the accessibility of
trimmer potentiometers. The style of trimmer and its board
location should be convenient for setting and resetting. Also
consider when and how adjustment will be performed, on
the assembly line or in the field, manually or by robotics.
4. Trimmer Applications. Normally, as shown in Figure 3,
a trimmer may be used in a circuit as a potentiometer
(three-terminal voltage divider) or as a rheostat (twoterminal variable resistor where all the current passes
through the wiper). Wiper current, therefore, is especially
important in rheostat applications. The potentiometer circuit
is preferred because of more stable performance; however,
if the trimmer is used as a rheostat, the resistance
constriction and temperature coefficient should be checked
carefully. Since the rated power is a partial load, it is
increased or decreased in proportion to the position of the
Figure 4
If you have any questions concerning the use of trimmer
potentiometers, please do not hesitate to contact us.
Guidelines for Production Processes
It is very important to consider the environmental extremes
of the production line as well as those typically taken into
account when selecting trimmers and other components for
new circuit designs. The mounting, soldering and cleaning
processes used during production may be more severe than
any conditions encountered during actual end use.
Follow the recommended guidelines and precautions to
minimize production line stress and don’t overlook testing
and verifying the ability of trimmers and other components
to withstand your assembly operations. Typical operations
during production as illustrated in Figure 5 are similar for
both surface mount and through-hole products.
Mounting
*
Flux
* Pre-Heat
* Soldering
*
*
^
Cooling
*
Wash
Rinse
Dry
Figure 5
Mounting
1. Mounting SMD Trimmers. Because surface mount
products have been designed for automatic assembly
systems, the operations involved for handling SMD
products is more complicated, but far more reliable and cost
effective in the long run than the techniques now used for
leaded components.
TOCOS AMERICA, INC.
106
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Guidelines & Precautions
For Using Trimmer Potentiometers
Packaged in embossed tape on reels, SMD trimmers are
automatically mounted by pick-and-place equipment. The
alignment, leveling, orientation and stability of these SMD
trimmers and other board components before soldering are
critical factors during this operation. It is therefore very
important to follow the recommended PC board land
patterns for all SMD trimmer models.
In preparation for mounting SMD trimmers by flow or reflow
soldering, solder paste land patterns are printed on the PC
board. The density, thickness and joint quality of the solder
paste is essential for reliable connections. Sn 63% Pb 37%
is recommended for the solder paste and should be 8 to 10
mils thick. All solder paste residue must be removed during
the cleaning process because it usually contains a high
percentage of activators. If no-clean, low solids paste is
used, the cleaning is not as critical.
When using the flow soldering method for mounting SMD
trimmers, an adhesive must be applied to assure placement
stability during physical handling and the curing process.
The amount of adhesive to use is dependent upon its
holding strength, and the curing time and temperature
should be in accordance with manufacturer’s specifications.
Be sure the curing time is sufficient for changing the
liquid adhesive into a solid before soldering. An epoxy is
recommended but should be used sparingly, as with any
adhesive, to avoid overflow onto solder pads and terminals.
2. Mounting Through-Hole Trimmers. Always use the
recommended PC board mounting hole layouts and
specified maximum hole diameters for through-hole
trimmers. Do not force lead terminals into PC board holes
that do not match the lead spacing of the trimmer unit.
To avoid undue stress on the lead wires from vibration or
mechanical shock, mount the trimmer body as close as
possible to the PC board. Clinch lead wires after insertion
to prevent any stress on the body of the trimmer before
soldering. Never bend or pull lead wires unnecessarily and
avoid applying excessive bending stress to the terminals
during normal insertion operations.
Flux Application
Flux Application. Before soldering, flux is applied to
remove surface oxides, prevent reoxidation and promote
wetting to ensure reliable intermetallic connections. The
most common application method is controlled foam.
Do not allow flux to adhere to any part of the trimmer
other than the terminals. Flux residue may penetrate the
trimmer housing causing poor wiper contact or malfunction
of the adjustment mechanism. Resin based or no-clean
synthetic resin based (SRB) fluxes are recommended.
Highly activated fluxes should be avoided. If an organic
acid (OA) will be used, please consult TOCOS before use.
Pre-Heating
Pre-heating is the controlled gradual heating of trimmers,
other components and PC boards in order to stabilize
temperature conditions before entering the actual solder
zone. Pre-heating prevents thermal shock and also
POTENTIOMETERS
vaporizes all solder paste solvents and moisture. To
minimize temperature difference between the top and
bottom of a PC board, pre-heat both sides of the board.
To avoid any adverse affect on trimmer performance and
reliability, use the lowest possible pre-heat temperature.
For screw actuated trimmers, make sure the position of the
wiper is not in contact with either end termination before
pre-heating and soldering as illustrated in Figure 6.
Good
Bad
Figure 6
1. Surface Mount Trimmers. For pre-heat time and
temperature for surface mount trimmers and the specially
designed G4C through-hole series, refer to the reflow and
flow temperature profiles specified for individual trimmer
series. A typical temperature profile in shown is Figure 7.
2. Through-Hole Trimmers. Because the through-hole
trimmer series encompass an extensive group of products,
individual temperature profiles are not included under each
through-hole trimmer series. The recommended pre-heating
parameters for through-hole trimmers are 50C to 150C
within a maximum exposure time of 3 minutes. The preheating and soldering temperature profile is specified in
Figure 9 under Soldering, Subsection 3.
Soldering
Using the appropriate soldering technique during the
production process ensures good solder connections
without degrading electrical and mechanical performance
of trimmers and other components. Generally, controlling
the maximum temperature and exposure time is the most
important concern during the soldering phase.
1. General Soldering Precautions. Before pre-heating
and soldering screw actuated trimmers, make sure the
position of the wiper is not in contact with the end terminals,
as illustrated in Figure 6, to avoid malfunction of trimmers.
Avoid soldering more than once using the reflow system.
Do not allow solder to flow onto any portion of the PC
board or any part of the trimmer other than the terminals.
Follow the recommended maximum temperature and
exposure time specified for each trimmer product. Limit
solder exposure time to the shortest time possible. Use a
minimum soldering temperature of 215C.
After soldering, allow appropriate cooling time for trimmers,
other components and PC board to prevent extreme
temperature difference between the soldering stage and the
washing cycle.
2. Soldering Surface Mount Trimmers. Reflow or flow
soldering may be used for SMD trimmer assembly. Usually,
four methods may be used for soldering SMD products:
IR (infrared), forced hot air convection, or vapor phase for
reflow soldering, and dual wave system for flow soldering.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
107
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Guidelines & Precautions
For Using Trimmer Potentiometers
The recommended temperature profiles for flow and reflow
soldering methods are specified under each series of SMD
products. Examples of flow and reflow temperature profiles
are shown in Figure 7 and Figure 8.
TP 260°C Max.
POTENTIOMETERS
Because there are many variations of board types and
circuit designs with similar or mixed components, the
parameters in Figure 9 will serve as a guideline for user’s
production process. User must always test and verify the
pre-heating and soldering parameters as well as other
phases of production before final production.
TP 260°C Max.
TM 180°C
Solder Melting Temp.
200
250
ts.*3~4 sec.
Solder
Melting Time
150
100
Pre-Heat Zone
50
1
2
Time (min.)
3
4
Temperature (°C)
Temperature (°C)
250
TM 180°C
Solder Melting Temp.
200
ts.*5 sec.
Solder
Melting Time
150
100
Pre-Heat Zone
50
1
Figure 7: Example of Flow Soldering Temperature Profile
For SMD Trimmers
2
Time (min.)
3
4
Figure 9: Recommended Flow Soldering Temperature Profiles
For Through-Hole Trimmers.
TP*240°C Max.
Temperature (°C)
240
TM 180°C
Solder Melting Temp.
200
150
ts.*10 sec.
Solder
Melting Time
100
Pre-Heat Zone
50
1
2
Time (min.)
3
4
Figure 8: Example of Reflow Soldering Temperature Profile
For SMD Trimmers
However, it should be noted that soldering temperature and
exposure time may have to be adjusted depending on which
heating source is used for reflow.
If infrared radiation is the heat source, the temperature
increase of trimmers and other components should be
carefully checked because the radiation absorption rate
depends on the color and structure of material of trimmers
and other components. User must always test and verify
pre-heating and soldering processes as well as other
production-line assembly before final production.
If the solder temperature exceeds the maximum allowable
limit, trimmers with silver terminations may have degraded
solder joints and loss of mechanical function due to the
leaching of silver into the solder.
3. Soldering Through-Hole Trimmers. Through-hole
trimmers are soldered using flow (wave) equipment. Two
popular methods for flow soldering are single wave or drag
system. Since temperature profiles are not specified under
each series of through-hole trimmers, follow the pre-heating
and soldering temperature profile for through-hole trimmers
specified in Figure 9.
Note: The G4C series trimmers are through-hole versions of
the surface mount G4 series and are designed to withstand
either flow or reflow soldering. Follow the recommended
temperature profiles specified for the SMD G4 series.
4. Using A Soldering Iron. Use the appropriate soldering
iron size, shape and heat capacity for soldering trimmer
potentiometers. Do not exceed the maximum time and
temperature parameters specified for each trimmer series.
Soldering should be performed in the shortest amount of
time possible to avoid flux and solder from adhering to the
caulked area around the base of the terminals or to any
other part of the trimmer. Never touch the body of a trimmer
with the soldering iron.
When inserting leaded terminals of a trimmer into the PC
board, do not apply excessive force when bending or
forming the wire leads. Always crimp wire leads to prevent
stress on the body of the trimmer and to provide stability
before soldering. To avoid poor connections and possible
component or circuit damage, do not expose trimmers to
excessive or repeated high temperature while using a
soldering iron.
5. Board Reworking. When board reworking is necessary
such as removing and replacing components or resoldering
connections, keep in mind that excessive and repeated
exposure to high temperatures may affect the performance
and reliability of a trimmer. If a soldering iron is used, follow
the guidelines specified in the previous section.
For reworking surface mount trimmers, it is not advisable to
use a soldering iron or flow (wave) soldering. Hot air reflow
is the safest method for SMD trimmers.
No matter what soldering method is used for reworking, be
sure to monitor the internal and external temperature of the
trimmer to avoid extreme temperature changes which may
damage trimmers.
6. Wire Soldering. If wiring is required such as external wire
jumpers, avoid using solid wire. Use stranded wire to
minimize stress on the terminals. If vibration is a problem,
use longer wire to alleviate added stress.
When soldering wire to a PC board, use the shortest time
possible to avoid excessive heat which may damage the
copper foil traces.
TOCOS AMERICA, INC.
108
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Guidelines & Precautions
For Using Trimmer Potentiometers
Cleaning
The cleaning process is a combination of washing, rinsing
and drying cycles that are necessary to remove flux and
contaminants from the PC board after soldering. Extra
cleaning precautions should always be taken for trimmers
because of their moving parts that are typically sealed with
a silicone O-ring or the more advanced chevron seal design.
The following guidelines will protect trimmers from the
harsh environment of the cleaning process and prevent
deterioration, degradation of performance and short circuit.
To prevent thermal shock and excessive saturation from the
washing and rinsing solutions, the temperature, exposure
time, spraying pressure and drying techniques must be
strictly controlled as the trimmer enters each cleaning cycle.
To protect the seal from high-pressure cleaning sprays,
select a suitable style trimmer that can be mounted on the
PC board so the rotor is not directly exposed to highpressure sprays.
TOCOS sealed trimmer potentiometers are designed for
immersion cleaning in a variety of cleaning agents. To insure
compatibility with any cleaning agent, test for adverse
reactions with the materials of the trimmer such as the
housing, shaft and O-ring, and also, make sure the integrity
of the markings is not affected after testing. Avoid using
cleaning solvents such as trichloroethane or Freon® which
endanger the environment.
Temperature control, especially during the transition from
the soldering process to the cleaning process, is extremely
important. After soldering, gradually cool down trimmers to
room temperature (25C) before the cleaning phase. If a
trimmer is not sufficiently cooled down before entering the
lower temperature of the wash cycle, and it is soaked with
a cleaning solution, the sudden drop in air temperature
will create a partial vacuum within the trimmer causing the
cleaning solution to be sucked into the trimmer.
Also, minimize temperature variations as trimmers move
through the cleaning cycles to avoid thermal shock and
trimmer damage during the cleaning process.
POTENTIOMETERS
2. Adjustment and Terminations. For electrical stability,
the setting position of the wiper in relationship to the
termination at either end of the resistive element is very
important when adjusting trimmers. Set the resistance
within a range that excludes at least 10% at each end of
the total electrical operation range (adjustment travel).
Never set the wiper at either end stop or in the dead band
area of a continuous rotation trimmer.
If you find that the wiper contact of a trimmer is set too
close to either end termination after adjustment testing,
select a trimmer with a more appropriately rated resistance
value that will allow more latitude for setting within the
recommended 80% range of adjustment travel.
To prevent electrical or mechanical damage while testing
trimmer performance, avoid using test equipment that may
inadvertently apply current greater than the maximum
allowable limit.
3. Locking Paint, Coating and Potting. Special processes
may be required during production such as the application
of locking paint, coating or potting materials. Make sure that
the substances used for these processes do not corrode
metals or attack plastic materials of the trimmers. Do not
subject trimmers to excessive heat during the curing of any
substance used for locking, coating or potting.
Because a trimmer is normally the only component on a
PC board with moving parts, the quantity, viscosity and
application of these substances is critical. Locking paint,
which is used to seal the position of the rotor after
adjustment, as well as coating and potting materials should
be of optimum viscosity. Low viscous substances (too thin)
will flow into moving parts of a trimmer; high viscous
substances (too thick) will impede the movement of the
adjustment mechanism. Use the minimal amount of any
substance and avoid applying them in the adjustment slots
or obliterating critical markings. For example, the proper
placement of locking paint is shown in Figure 10.
To avoid the effects of excessive moisture during the
cleaning process, limit the wash-rinse and rinse-dry cycles
to as few as possible.
Good
Make sure cleaning solutions are completely evaporated
during the drying cycle before any adjustment is made.
Because of the variations in time, temperature, cleaning
agents and board types, the cleaning processes should be
tested and verified before final production.
Adjustment Guidelines
1. Adjustment Tool. Use the appropriate adjustment tool
which conforms to the geometric slot design of the trimmer.
Do not use a tool that is designed for high torque
applications. For better control, the tool should have an
adequate length and comfortable handle or knurled shaft.
During actuation, the applied rotational force should be
within the shaft torque range specified for each trimmer
series. To prevent discontinuity or mechanical damage,
never apply any force greater than the stop torque specified
for the trimmer.
Bad
Figure 10
4. Environmental Conditions. If a trimmer is wet or
condensation has formed on the terminals and housing,
do not attempt any adjustment. Actuation under these
conditions may allow moisture to penetrate into the
trimmer causing silver migration and eventual burning or
short circuit.
It is important to note that silver migration is also likely to
occur if high DC current is applied under high humidity and
high temperature conditions.
Avoid exposing the adjustment mechanism, terminals and
other portions of trimmers to solvents such as ammonium,
alcohol, esters, halogenized hydrocarbons and silicone, or
to any toxic gas or oil.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
109
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Guidelines & Precautions
For Using Trimmer Potentiometers
POTENTIOMETERS
Storage
Avoid storing trimmer potentiometers in high temperature
and high humidity areas. The recommended storage
conditions are 25C (room temperature) at a maximum
relative humidity of 75%. An air-conditioned area is the
most ideal storage environment.
Keep trimmers in a dust-free area, and do not store them
in direct sunlight.
Do not store trimmers within the vicinity of any corrosive
gases such as hydrogen sulfide, sulfurous acid, chlorine or
ammonium. The oxidation of metals caused by such toxic
gases may affect solderability as well as the electrical and
mechanical performance of these products.
Keep trimmer products in the original packages until just
before use, and unpack only the quantity needed. Always
seal any opened packages to protect trimmers from
oxidation and contaminants.
If any special storage conditions are specified for trimmer
products, it is the user’s responsibility to comply with the
special requirements.
Explanation of Terms
The following explanation of terms, based on the booklet
of industrial standards published by the Variable Electronic
Components Institute (VECI), will help you understand
the purpose, construction and applications for trimmer
potentiometers.
General Terms
Trimmer Potentiometer. An electrical mechanical variable
resistor with three terminals. Two of the terminals are
connected to the resistive element (one at each end), and
one terminal is connected to a movable conductive contact
which slides over the element, thus allowing the input
voltage to be divided as a result of the mechanical input.
It is designed to function as a voltage divider or rheostat.
These trimmers are commonly included in a circuit for easy
adjustment and are used to correct variations in other circuit
components or for changes due to aging. They are used for
infrequent adjustment and, therefore, usually not accessible
to the operator.
Wirewound Trimmer Potentiometer. A trimming
potentiometer characterized by a resistance element made
up of turns of wire on which the wiper contacts only a small
portion of each turn.
Non-Wirewound Trimmer Potentiometer. A trimming
potentiometer characterized by the continuous nature of
the surface area of the resistance element to be contacted.
Contact is maintained over a continuous, unbroken path.
The resistance is achieved by using material compositions
other than wire such as cermet, carbon, conductive plastic
or metal film.
Resistance Element. A continuous, unbroken length of
resistive material without joints, bonds or welds except at
the junction of the element and the electrical terminals
connected to each end of the element.
Terminal. An external part that provides electrical access
to the resistance element and wiper.
Leadwire Type Terminal. Flexible insulated conductor.
Printed Circuit Terminal. Rigid uninsulated electrical
conductor suitable for printed circuit board plug-in.
Solder Lug Terminal. Rigid uninsulated electrical
conductor suitable for external lead attachment.
Wiper. The part of a trimmer which makes contact with the
resistive element that allows the output to be varied when
the adjustment shaft is rotated.
Stop, Clutch Action. An internal device which allows the
wiper to idle at the ends of the resistive element without
damage as the adjustment shaft continues to be actuated in
the same direction.
Stop, Solid. A positive limit to mechanical and /or electrical
adjustment.
Stacking. The mounting of one trimmer potentiometer
adjacent to or on top of another utilizing the same mounting
hardware.
Theoretical Resolution. (wirewound only) The theoretical
measurement of sensitivity to which the output ratio may be
adjusted and is the reciprocal of the number of turns of wire
in resistance winding expressed as a percentage.
N = Total number of resistance wire turns.
1
100 = Theoretical resolution percent.
N
Input and Output Terms
Total Applied Voltage. The total voltage applied between
the designated input terminals.
Output Voltage. The voltage between the wiper terminal
and the designated reference point. Unless otherwise
specified, the designated reference point is the counterclockwise (CCW ) terminal.
Output Ratio. The ratio of the output voltage to the
designated input reference voltage. Unless otherwise
specified, the reference voltage is the total applied voltage.
Load Resistance. An external resistance as seen by
the output voltage (connected between the wiper terminal
and the designated reference point ).
TOCOS AMERICA, INC.
110
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Explanation of Terms
POTENTIOMETERS
Adjustment Terms
Electrical and Operational Terms
Direction of Travel. Clockwise (CW ) or counterclockwise
(CCW ) rotation when viewing the adjustment shaft end of
the potentiometer. The designation of terminals in the figure
below corresponds to the direction of wiper travel.
Absolute Minimum Resistance. The resistance measured
between the wiper terminal and each end terminal with the
wiper positioned to give a minimum value.
Clockwise Shaft Rotation
ccw #1
#3 cw
Adjustability, Output Resistance. The precision with
which the output resistance of a device can be set to the
desired value.
Adjustability, Output Voltage Ratio. The precision with
which the output voltage ratio of a device can be set to the
desired value.
#2
wiper
Actuation. Turning the shaft or other mechanical movement
of a trimmer in order to move the wiper over the surface of
the resistive element.
Adjustability. The precision with which the output of a
trimmer can be adjusted to the desired value.
Adjustment Locking. Refers to the sealing or marking of
the position of the adjustment screw after initial setting with
viscous paint or other similar substance.
Adjustment Shaft. The mechanical input part of a trimmer
potentiometer which when actuated causes the wiper to
traverse the resistance element resulting in a change in
output voltage or resistance.
Adjustment Travel, Electrical. The total travel of the
adjustment shaft between minimum and maximum output
voltages.
Backlash. The play or unimpeded motion of the adjustment
mechanism which causes poor adjustability.
Continuity Travel. The total travel of the shaft over which
electrical continuity is maintained between the wiper and the
resistive element.
Mechanical Cycle. Movement of the wiper from one end of
travel to the other and back again.
Mechanical Travel, Solid Stops. The total travel of the
adjustment shaft between integral stops. Continuity must be
maintained throughout the travel.
Mechanical Travel, Clutch Action. The total travel of the
adjustment shaft between the points where clutch actuation
begins. Continuity must be maintained throughout the travel
and during clutch actuation.
Mechanical Travel, Continuous Rotation. The total travel
of the adjustment shaft when the wiper movement is
unrestricted at either end of the resistive element as the
adjustment shaft continues to be actuated.
Multi-Turn Adjustment. Requires more than 360
mechanical input to cause the wiper to traverse the total
resistance element.
Single-Turn Adjustment. Requires 360 or less mechanical
input to cause the wiper to traverse the total resistance
element.
Adjustment Noise. Random unpredictable and undesirable
electrical signals that are superimposed on the output of a
trimmer during the adjustment rotation.
Contact Resistance Variation (CRV ). The apparent
resistance seen between the wiper and the resistance
element when the wiper is energized with a specified current
and moved over the adjustment travel in either direction at a
constant speed. The output variations are measured over a
specified frequency bandwidth, exclusive of the effects due
to roll-on or roll-off of the terminations and is expressed in
ohms or percentage of total resistance.
Continuity. Continuity is the maintenance of continuous
electrical contact between the wiper and both end terminals
of the resistive element.
Dielectric Strength. The ability to withstand the application
of a specified potential of a given characteristic between the
terminals and all other external conducting parts such as
shaft, housing and mounting hardware without exceeding a
specified leakage current value.
End Resistance. The resistance measured between the
wiper terminal and an end terminal when the wiper is
positioned at the corresponding end of mechanical travel.
Absolute minimum resistance and end resistance are
synonymous for continuous rotation trimmers.
Equivalent Noise Resistance (ENR). (wirewound only)
Any spurious variation in the electrical output not present in
the input, defined quantitatively in terms of an equivalent
parasitic, transient resistance in ohms, appearing between
the contact and the resistive element when the shaft is
rotated or translated.The ENR is defined independently of
the resolution, functional characteristics and the total travel.
The magnitude of the ENR is the maximum departure from a
specific reference line. The wiper of the potentiometer is
required to be excited by a specific current and moved at a
specific speed.
Inductance. Wirewound trimmers generally exhibit
inductance function or phase shift, associated with the
construction of the element, when operated in a high
frequency application.
Insulation Resistance. The resistance to a specified
DC voltage impressed between the terminals and all other
external conducting parts such as shaft, housing and
mounting hardware.
Linear Taper. The plot of the trimmer output that is directly
proportionate to constant rate of shaft movement.
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
111
E-mail: sales@tocos.com
www.tocos.com
TOCOS
®
Explanation of Terms
POTENTIOMETERS
Load Life. The number of hours at which a device may
dissipate rated power under specified operating conditions
while remaining within specified allowable degradations.
Total Resistance. The DC resistance between the input
terminals with the wiper positioned to either end stop, or in
dead band for continuous rotation potentiometers.
Log Taper. The plot of the trimmer output that is
logarithmetically proportionate to constant rate of shaft
movement.
Wiper Current. The maximum allowable sustained current
through the wiper contact. This value is essentially
independent of total resistance. It is especially important in
rheostat mode applications.
Ohm. The basic unit of electrical resistance.
Power Rating. The maximum power that a trimmer
potentiometer can dissipate across the total resistive
element under specified conditions while meeting specified
performance requirements.
Resistance-Temperature Characteristic (RTC). The
difference between the total resistance values measured at
a reference temperature of 25C and the specified test
temperature expressed as a percent of the total resistance.
RTC =
R 2R 1
100
R1
Where: R 1 = Resistance at reference temperature (25C)
in ohms.
R 2 = Resistance at test temperature in ohms.
Resistance Tolerance. The total resistance range that can
be tolerated by the circuit after giving consideration to
changes due to aging and wear. It is NOT a measure of
variable resistor quality. This tolerance applies to total
resistance only, not to the set point of the wiper circuit.
Mechanical Terms
Carbon Composition. A type of resistive element made
from a mixture of carbon powders in a binder molded into a
solid mass, under heat and pressure, as an integral part of
its substrate.
Cermet. (from CERamic and METals) A type of resistive
element consisting of a mixture of metal particles, precious
metal oxides and glass powders, which are mixed with a
liquid vehicle, screened onto a ceramic substrate and fired
at vitrifying temperatures.
Collector Rail. The part of a trimmer on which the wiper
travels that is electrically connected to the wiper terminal.
Contact Force. The force that holds the wiper in contact
with the surface of the element.
Immersion Sealed. The ability of the unit to withstand
submersion in acceptable cleaning solutions used in normal
soldering processes without performance degradation
under specific environmental conditions.
Roll-On Step. The abrupt change in output that occurs as
the wiper moves from the termination area onto the resistive
material of a non-wirewound element.
Potting. Process in which the space between a component
and its case is filled with a compound which hardens to
provide an airtight, moisture-proof, insulating seal.
Resolution. The ability of a trimmer to make very fine
adjustments. In a wirewound trimmer, the percent of total
output produced by a single turn of wire. Non-wirewound
trimmers have essentially infinite resolution. Wirewound
trimmers have a step function increase in resistance across
the element, so ohmic values between these steps cannot
be obtained.
Rotor. An insulated part of a trimmer, attached to the shaft,
to which the wiper is connected.
Rotational Life. The number of cycles obtainable under
specific operating conditions while remaining within
specified allowable degradation. A cycle is defined as one
complete traversal of the wiper over the resistive element in
both directions.
Setting Stability. The amount of change in the output
voltage, without readjustment, expressed as a percentage
of the total applied voltage.
Temperature Coefficient of Resistance ( TC). The unit
change in resistance per degree celsius change from a
reference temperature, expressed in parts per million per
degree celsius as follows:
TC =
Where: R 1
R2
T1
T2
=
=
=
=
Solderability. The ability of the terminals to accept a
uniform coating of solder under specified conditions.
Starting Torque. The maximum moment in the clockwise
and counterclockwise directions required to initiate shaft
adjustment anywhere in the mechanical travel.
Stick-Slip. A condition in which starting torque is greater
than running torque. This creates a very abrupt transition
between the two, making fine adjustments difficult.
Stop Torque. The maximum static moment that can be
applied to adjustment shaft at each mechanical stop for a
specified period of time without loss of continuity or
mechanical damage affecting operational characteristics.
Terminal Strength. The ability of the terminals to withstand
specified mechanical stresses without sustaining damage
that would affect utility of the terminals or operation of the
trimming potentiometer.
Termination. The connection between the resistive element
and the terminals.
R 2R 1 106
R 1 ( T2T1)
Resistance at reference temperature in ohms.
Resistance at test temperature in ohms.
Reference temperature in degrees celsius.
Test temperature in degrees celsius.
Weldability. The ability of materials to be welded together
under specified conditions.
TOCOS AMERICA, INC.
112
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
Conversion Tables
Centigrade/
Fahrenheit
Fraction Conversions
Millimeters/Inches
C
F
Fraction
Inches
mm
mm
Inches
mm
Inches
mm
Inches
mm
Inches
538
500
482
450
427
400
371
350
316
300
260
250
204
200
190
180
170
160
150
140
130
125
120
110
105
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
5.0
10.0
15.0
17.8
20.0
20.6
23.3
25.0
26.1
28.9
30.0
31.7
34.4
35.0
37.2
40.0
42.8
45.0
45.6
48.3
50.0
51.1
53.9
55.0
56.7
59.4
60.0
62.2
65.0
67.8
1000
932
900
842
800
752
700
662
600
572
500
482
400
392
374
356
338
320
302
284
266
257
248
230
221
212
203
194
185
176
167
158
149
140
131
122
113
104
95
86
77
68
59
50
41
32
23
14
5
0
4
5
10
13
15
20
22
25
30
31
35
40
45
49
50
55
58
60
65
67
70
75
76
80
85
90
1/64
1/32
3/64
1/16
0.015625
0.03125
0.046875
0.0625
0.39688
0.79375
1.19063
1.5875
0.01
0.02
0.03
0.04
0.00039
0.00079
0.00118
0.00157
0.65
0.66
0.67
0.68
0.02559
0.02598
0.02638
0.02677
29.0
30.0
31.0
32.0
1.14173
1.18110
1.22047
1.25984
91.0
92.0
93.0
94.0
3.58268
3.62205
3.66142
3.70079
5/64
3/32
7/64
1/8
0.078125
0.09375
0.109375
0.125
1.98438
2.38125
2.77813
3.175
0.05
0.06
0.07
0.08
0.00197
0.00236
0.00276
0.00315
0.69
0.70
0.71
0.72
0.02717
0.02756
0.02795
0.02835
33.0
34.0
35.0
36.0
1.29921
1.33858
1.37795
1.41732
95.0
96.0
97.0
98.0
3.74016
3.77953
3.81890
3.85827
9/64
5/32
11/64
3/16
0.140625
0.15625
0.171875
0.1875
3.57188
3.96875
4.36563
4.7625
0.09
0.10
0.11
0.12
0.00354
0.00394
0.00433
0.00472
0.73
0.74
0.75
0.76
0.02874
0.02913
0.02953
0.02992
37.0
38.0
39.0
40.0
1.45669
1.49606
1.53543
1.57480
99.0
100.0
101.0
101.6
3.89764
3.93701
3.97638
4.0
13/64
7/32
15/64
1/4
0.203125
0.21875
0.234375
0.250
5.15938
5.55625
5.95313
6.35
0.13
0.14
0.15
0.16
0.00512
0.00551
0.00591
0.00630
0.77
0.78
0.79
0.80
0.03031
0.03071
0.03110
0.03150
41.0
42.0
43.0
44.0
1.61417
1.65354
1.69291
1.73228
102.0
103.0
104.0
105.0
4.01575
4.05512
4.09449
4.13386
17/64
9/32
19/64
5/16
0.265625
0.28125
0.296875
0.3125
6.74688
7.14375
7.54063
7.9375
0.17
0.18
0.19
0.20
0.00669
0.00709
0.00748
0.00787
0.81
0.82
0.83
0.84
0.03189
0.03228
0.03268
0.03307
45.0
46.0
47.0
48.0
1.77165
1.81102
1.85039
1.88976
106.0
107.0
108.0
109.0
4.17323
4.21260
4.25197
4.29134
21/64
11/32
23/64
3/8
0.328125
0.34375
0.359375
0.375
8.33438
8.73125
9.12813
9.525
0.21
0.22
0.23
0.24
0.00827
0.00866
0.00906
0.00945
0.85
0.86
0.87
0.88
0.03346
0.03386
0.03425
0.03465
49.0
50.0
50.8
51.0
1.92913
1.96850
2.0
2.00787
110.0
111.0
112.0
113.0
4.33071
4.37008
4.40945
4.44882
25/64
13/32
27/64
7/16
0.390625
0.40625
0.421875
0.4375
9.92188
10.31875
10.71563
11.1125
0.25
0.26
0.27
0.28
0.00984
0.01024
0.01063
0.01102
0.89
0.90
0.91
0.92
0.03504
0.03543
0.03583
0.03622
52.0
53.0
54.0
55.0
2.04724
2.08661
2.12598
2.16535
114.0
115.0
116.0
117.0
4.48819
4.52756
4.56693
4.60630
29/64
15/32
31/64
1/2
0.453125
0.46875
0.484375
0.5
11.50938
11.90625
12.30313
12.7
0.29
0.30
0.31
0.32
0.01142
0.01181
0.01220
0.01260
0.93
0.94
0.95
0.96
0.03661
0.03701
0.03740
0.03780
56.0
57.0
58.0
59.0
2.20472
2.24409
2.28346
2.32283
118.0
119.0
120.0
121.0
4.64567
4.68504
4.72441
4.76378
33/64
17/32
35/64
9/16
0.515625
0.53125
0.546875
0.5625
13.09688
13.49375
13.89063
14.2875
0.33
0.34
0.35
0.36
0.01299
0.01339
0.01378
0.01417
0.97
0.98
0.99
1.0
0.03819
0.03858
0.03898
0.03937
60.0
61.0
62.0
63.0
2.36220
2.40157
2.44094
2.48031
122.0
123.0
124.0
125.0
4.80315
4.84252
4.88189
4.92126
37/64
19/32
39/64
5/8
0.578125
0.59375
0.609375
0.625
14.68438
15.08125
15.47813
15.875
0.37
0.38
0.39
0.40
0.01457
0.01496
0.01535
0.01575
2.0
3.0
4.0
5.0
0.07874
0.11811
0.15748
0.19685
64.0
65.0
66.0
67.0
2.51969
2.55906
2.59843
2.63780
126.0
127.0
128.0
129.0
4.96063
5.0
5.03937
5.07874
41/64
21/32
43/64
11/16
0.640625
0.65625
0.671875
0.6875
16.27188
16.66875
17.06563
17.4625
0.41
0.42
0.43
0.44
0.01614
0.01654
0.01693
0.01732
6.0
7.0
8.0
9.0
0.23622
0.27559
0.31496
0.35433
68.0
69.0
70.0
71.0
2.67717
2.71654
2.75591
2.79528
130.0
131.0
132.0
133.0
5.11811
5.15748
5.19685
5.23622
45/64
23/32
47/64
3/4
0.703125
0.71875
0.734375
0.75
17.85938
18.25625
18.65313
19.05
0.45
0.46
0.47
0.48
0.01772
0.01811
0.01850
0.01890
10.0
11.0
12.0
13.0
0.39370
0.43307
0.47244
0.51181
72.0
73.0
74.0
75.0
2.83465
2.87402
2.91339
2.95276
134.0
135.0
136.0
137.0
5.27559
5.31496
5.35433
5.39370
49/64
25/32
51/64
13/16
0.765625
0.78125
0.796875
0.8125
19.44688
19.84375
20.24063
20.6375
0.49
0.50
0.51
0.52
0.01929
0.01969
0.02008
0.02047
14.0
15.0
16.0
17.0
0.55118
0.59055
0.62992
0.66929
76.0
76.2
77.0
78.0
2.99213
3.0
3.03150
3.07087
138.0
139.0
140.0
141.0
5.43307
5.47244
5.51181
5.55118
53/64
27/32
55/64
7/8
0.828125
0.84375
0.859375
0.875
21.03438
21.43125
21.82813
22.225
0.53
0.54
0.55
0.56
0.02087
0.02126
0.02165
0.02205
18.0
19.0
20.0
21.0
0.70866
0.74803
0.78740
0.82677
79.0
80.0
81.0
82.0
3.11024
3.14961
3.18898
3.22835
142.0
143.0
144.0
145.0
5.59055
5.62992
5.66929
5.70866
57/64
29/32
59/64
15/16
0.890625
0.90625
0.921875
0.9375
22.62188
23.01875
23.41563
23.8125
0.57
0.58
0.59
0.60
0.02244
0.02283
0.02323
0.02362
22.0
23.0
24.0
25.0
0.86614
0.90551
0.94488
0.98425
83.0
84.0
85.0
86.0
3.26772
3.30709
3.34646
3.38583
146.0
147.0
148.0
149.0
5.74803
5.78740
5.82677
5.86614
61/64
31/32
63/64
1
0.953125
0.96875
0.984375
1.0
24.20938
24.60625
25.00313
25.4
0.61
0.62
0.63
0.64
0.02402
0.02441
0.02480
0.02520
25.4
26.0
27.0
28.0
1.0
1.02362
1.06299
1.10236
87.0
88.0
89.0
90.0
3.42520
3.46457
3.50394
3.54331
150.0
151.0
152.0
152.4
5.90551
5.94488
5.98425
6.0
C = (F 32 ) 5/9
F = (C 9/5) 32
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664
Fax: 847-884-6665
E-mail: sales@tocos.com
www.tocos.com
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173
Tel: 847-884-6664 Fax: 847-884-6665
E-mail: sales @ tocos.com www.tocos.com
For further information, please contact:
Affiliated With
© 2000 TOCOS AMERICA, INC.
All Rights Reserved
Printed in USA
Catalog 2002-0011