5. Dimensions and Panel Cut-out 5. 1 Hardware Specifications Dimensions and Panel Cut-out ZM-350/360 Series External View and Dimensions (Unit: mm) • Side View • Front View 66.1 233 SYSTEM F1 F3 F4 F5 F6 POWER F7 6.6 • Bottom View 220 LAN CN6 Battery replacement. CN5 MEMORY 220 CF MJ2 CN1 • Panel Cut-out Dimensions 220.5 +0.5 -0 +0.5 PRINTER MJ1 165.5 -0 24VDC - + 24.3 165 See operating or maintenance instruction for type of battery to be used. 178 165 F2 • Rear View 1-13 7. Mounting Procedure 7. 1-19 1 Mounting Procedure 1. Cut out the mounting panel (max. thick: 5 mm) to match the dimensions shown below. Mounting panel Panel cut-out hole • Panel cut-out dimensions +0.5 −0 220.5 +0.5 289 −0 ZM-350/360 EM 216.2 −00.5 SYST F1 289 −+00.5 165.5 −+00.5 (Unit: mm) 313 −+ 0.5 0 F2 F3 F5 F6 F7 ZM-370 ZM-380 246.2 −+00.5 216.2 −+00.5 F4 ER POW 2. Insert four fixtures attached to the ZM-300 series into the mounting holes, and tighten them with the locking screws. Tightening torque ZM-350/360/370: 0.3 to 0.5 N•m Fixtures ZM-380: 0.5 to 0.7 N•m Fixture dimensions Mounting hole Mounting hole ZM-300 series (Unit: mm) CN6 Mounting panel 10.5 30 .0 ORY MEM CN5 CF 17.8 TER PRIN MJ2 MJ1 CN1 LAN VAC 100-240N L * When the ZM-300 unit is attached to the mounting panel, the fixtures and frame grounds (FG) are connected. To prevent static electricity, be sure to connect the mounting panel to the frame ground. Fixtures 3. Mount the gasket in contact with the mounting panel so that it will be sandwiched securely between the unit and the mounting plate. Mounting Angle 90° ay pl 135° is D Install the unit within the angle of 15° to 135° degrees as shown on the right. • When the mounting angle is between 15° and 45° or when you use the option module, ZM-301EU (video input and audio output), adjust the ambient temperature between 0°C and +40°C. y Displa 15° 0° Hardware Specifications Mounting Procedure 1-20 7. Mounting Procedure Mounting Margin About marginal space for connecting to the serial connector (CN1), see the figures below. ZM-350/360 series 220 LAN CN6 165 See operating or maintenance instruction for type of battery to be used. 100 Battery replacement. CN5 MEMORY CF PRINTER MJ2 MJ1 MJ2 MJ1 CN1 60 40 CN1 24.3 24VDC - + ZM-370 series 288.0 CN6 CN5 215.2 MEMORY 100 See operating or maintenance instruction for type of battery to be used. CF Battery replacement. LAN MJ1 CN1 PRINTER MJ2 35.2 100-240VAC L N 20 40 MJ2 MJ1 CN1 ZM-380 series 312 CN6 CN5 MEMORY 100 CF Battery replacement. LAN CN1 MJ1 MJ2 PRINTER MJ2 100-240VAC L N 20 CN1 MJ1 63.8 245.2 See operating or maintenance instruction for type of battery to be used.