PN-V602 LCD MONITOR Sharp Quality and Brilliance— for Utterly Sensational Signage Note: The PN-V602 is intended for use in indoor environments. If the monitor is installed in a location exposed to excessive direct sunlight such as a windowfront, consult your installer to determine if additional measures to reduce ultraviolet and infrared radiation and ambient temperature are required. Introducing the PN-V602 professional LCD monitor with super-h multi-screen configurations in bright locations. The PN-V602 also cutting-edge PN-V602 is such a shining example of digital signage High Brightness, High Visibility Ultra-high brightness of 1,500 cd/m2 lets the PN-V602 excel in brightly lit indoor locations, even those awash in sunlight. And high contrast makes images clearly visible from a distance, so the PN-V602 can be installed in places where the LCD monitor is well out of reach—but not view—of the targeted audience. Indoor sports facilities, transportation hubs, shopping centres, and event venues are just some of the many settings where the PN-V602 can give vivid display to superb-quality images. Breathtaking Image Quality The PN-V602’s exceptional image quality comes from Sharp’s own industry-leading LCD technologies. Sharp UV2A* technology, incorporated into the 60-inch LCD panel, ensures highly efficient use of light from the backlight and prevents light leakage for the display of truly bright whites, amazingly vivid colours, and extremely deep blacks. And Sharp’s full-array LED backlight, sporting LED elements evenly positioned across the entire panel, gives PN-V602 images remarkably uniform brightness. * UV2A stands for “Ultraviolet-induced Multi-domain Vertical Alignment,” a photo-alignment technology that ensures uniform alignment of liquid crystal molecules in a certain direction. (Image) High Contrast and Superb Energy Efficiency The PN-V602 owes much of its outstanding black levels, amazing contrast, and superb energy efficiency to local dimming of the LED backlight. Local dimming allows specific groups of LEDs to be independently dimmed or brightened for greater control of the Local Dimming darkness and brightness in different areas of the monitor, resulting in LED backlight brightened LED backlight dimmed considerably reduced power consumption. That’s why the PN-V602 can deliver significantly better contrast and brightness than conventional LCD monitors while using remarkably less power! (Image) Power Consumption Comparison* 1,500 cd/m2 Local dimming: OFF 1,500 cd/m2 Local dimming: HIGH (ref) 700 cd/m2 Local dimming: HIGH 500W 270W Down by approx. 46% 155W * Results of Sharp measurements when displaying broadcast content (sub-clause 11.6) stipulated under IEC 62087 Ed. 2.0 and with brightness set to maximum. Note that the power consumption reduction will vary depending on the images displayed. Note: The PN-V602 is intended for use in indoor environments. If the monitor is installed in a location exposed to excessive direct sunlight such as a windowfront, consult your installer to determine if additional measures to reduce ultraviolet and infrared radiation and ambient temperature are required. Note: The images in this brochure are simulated. Depending on the system, additional software/hardware may be required. high 1,500 cd/m2 brightness and extraordinary image quality—the brilliant way to bring dazzling results to boasts streamlined bezels, making it the ideal monitor for nearly seamless, high-impact video walls. No wonder the potential. Create Dynamic Video Walls Multiple PN-V602 monitors can be joined together to create video walls configured to a variety of purposes and settings. Easy to assemble and easily controlled via the RS-232C interface or a network*, video walls composed of Sharp PN-V602 monitors bring dynamic, high-impact exposure to commercial display content. 25 monitors 268 134 151 227 3 monitors 378 9 monitors 4 monitors 401 668 227 ... and more * PN-ZB02 Interface Expansion Board is required for control via a network. Units: cm (measurements are approximations that include the bezel width) Choice of Installation Mode Ultra-Slim Bezel The PN-V602 offers a choice of landscape or portrait installation, allowing customers to select the mode that best suits their display content and application. The PN-V602 boasts an ultra-slim bezel that makes the lines between neighbouring monitors an almost seamless 6.5 mm*1 wide (2.4 mm right and bottom, 4.1 mm left and top)*2. This enables the high-impact display of large, crisp images that catch the eye and capture the attention. Mirror Frames (option) In multi-screen configurations, Mirror Frames minimise* the lines between slim-bezel PN-V602 monitors by reflecting mirror images from the display content. This creates more dynamic video walls and an even smoother big-picture effect. * Visibility of the seams between monitors will vary depending on such factors as the on-screen images and the viewing angle. Mirror Frame Mounting 6.5 mm 6.5 mm *1: Does not include the gap between the monitors. *2: Non-display area for neighbouring monitors is 7.1 mm. PN-ZR33 PN-ZR32 PN-ZR32 Enlarge (Zoom) Display (for up to 25 Monitors) Mode PN-ZR33 PN-ZR32 Long Mirror Frame PN-ZR33 Short Mirror Frame A Multi-Screen Configuration with Mirror Frames The Enlarge (Zoom) Display mode can spread one image from a PC across up to 25 monitors (in a 5 x 5 configuration). The Frame Width Adjustment function eliminates misalignment and boldly enhances the enlarged image on a multi-screen display. Without Mirror Frames With Mirror Frames (Simulated images) Single-screen display Brightness Sensor* The Brightness Sensor function ensures clear visibility by automatically adjusting backlight brightness to complement surrounding brightness levels. In dark surroundings, backlight brightness automatically lowers, providing optimal viewing and energy savings as well. 5 x 5 (25-screen) display 24/7 Operation The PN-V602 is rugged enough for continuous 24/7 operation in the most demanding professional applications. * Requires optional PN-ZR01 Environmentally Friendly Design PN-ZR01 Control Kit (sold separately) When one of the PN-V602s in a multi-screen configuration is fitted with a remote control sensor box, all of the monitors can be conveniently operated through one remote control unit. The PN-V602 conforms to the ENERGY STAR® programme, an international system identifying energy-efficient products, and to the RoHS Directive restricting the use of hazardous substances. Remote control unit Remote control sensor box Specifications (tentative) Landscape / Portrait LCD Panel 60-inch widescreen (152.4 cm diagonal), UV2A LCD 1,329.4* (52 / ) 1,366 x 768 pixels Computer Input 1,500 cd/m2 Contrast Ratio 1,000,000 : 1 (local dimming set to HIGH) 5,000 : 1 (without local dimming) 664.7 (26 1/8) 200 (7 7/8) Units: mm (inch) * Screen dimensions * To use the VESA-standard mounting bracket, use M6 screws that are 8 to 10 mm plus the thickness of the bracket. Viewing Angle (H/V) 176°/176° (CR ≥ 10) 1,328.8 x 747.1 mm (52 5/8" x 29 7/16") Response Time 6 ms (gray to gray, avg.) Video Analogue RGB (0.7 Vp-p) [75 Ω], Digital (conforms to DVI 1.0 standards) Input/Output Terminals Synchronisation Horizontal/vertical separation (TTL: positive/negative) Sync-on-green, Composite sync (TTL: positive/negative) (standard) Plug & Play VESA DDC2B Audio input RS-232C output Control kit jack VESA DPMS, DVI DMPM NTSC (3.58 MHz, 4.43 MHz)*2 / PAL / PAL60 / SECAM Standard PC analogue: Mini D-sub 15-pin x 1*4, HDMI (1080p compatible) x 1*5, 3.5 mm-diameter mini stereo jack x 1, Video*4*6, Component video*4*6, RS-232C: D-sub 9-pin x 1, Control Kit jack x 1 Via Optional PN-ZB02 Board PC digital: DVI-D 24-pin (HDCP compatible) x 1, PC analogue: BNC x 1*7*8*9, Video: BNC x 1*6, S-Video x 1, Component video: BNC (Y, Cb/Pb, Cr/Pr) x 1*6*7, Audio: RCA pin (L/R) x 2 Standard Audio: RCA pin (L/R) x 1, RS-232C: D-sub 9-pin x 1 Via Optional PN-ZB02 Board PC digital: DVI-D 24-pin x 1, External speaker: 10W + 10W (6 Ω) Input/Output Terminals*3 Via Optional PN-ZB02 Board LAN port (10Base-T/100Base-TX) Mounting VESA (6 points), 200 mm (7 7/8") pitch, M6 screw or VESA (4 points), 200 mm (7 7/8") pitch, M6 screw Power Supply 100V – 240V AC, 50/60 Hz PC/AV input (HDMI) PC analogue Audio input RGB output (D-sub) RS-232C input Optional port (option) PN-ZB02 Interface Expansion Board PC/AV input digital RGB (DVI-D) PC/AV output digital RGB External (DVI-D) speakers LAN port PC analogue input RGB (BNC) Audio input Video input (BNC) Component video input (BNC) S-Video input 510W Power Consumption Environmental Conditions 668.8 (26 3/8) 200 (7 7/8) 200 (7 7/8) 1,335.9 (52 5/8) Active Screen Area (W x H) Power Management Output Terminals*3 0.973 x 0.973 mm Max. Brightness*1 Video Colour System Input Terminals*3 747.7* (29 3/8) Max. Display Colours (approx.) 16.77 million colours Pixel Pitch (H x V) 58.3 (2 1/4) 3 8 VESA holes* 667.1 (26 1/4) 30 (1 1/8) Max. Resolution 149.3 124.3 (5 7/8) (4 7/8) 200 (7 7/8) Installation 92.3 (3 5/8) 754.2 (29 3/4) PN-V602 27.2 (1 1/8) 373.9 (14 3/4) Dimensions Model Name Operating Temperature 0°C to 40°C Operating Humidity 20% to 80% RH (no condensation) Dimensions (W x D x H) (approx.) Weight (not including PN-ZB02) (approx.) Other Options PN-ZR01 : Control Kit 1,335.9 x 149.3 x 754.2 mm (52 5/8" x 5 7/8" x 29 11/16") (Display section only, not including protrusions) (remote controller and remote control sensor box) PN-ZR32 : Long Mirror Frame 44 kg (97 lbs) PN-ZR33 : Short Mirror Frame *1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness. *2 Requires separately sold PN-ZB02 Interface Expansion Board. *3 Use a commercially available connection cable for PC and other video connections. *4 The mini D-sub 15-pin terminal can be used for PC analogue, video, or component video, all of which are selectable from the menu. When used with a video or component video source, a commercially available conversion cable is required. *5 For both PC and AV components. *6 When the PN-V602 is equipped with the optional PN-ZB02 board, either the LCD monitor’ s standard-equipped video and component terminals or the PN-ZB02’ s video and component terminals can be selected for use from the menu. *7 The analogue and component BNC terminals are switchable. Use the menu to select. *8 For the proper display of 1,366 x 768 images, a separately sold graphics board with appropriate specifications is required. Consult your Sharp representative for more information. *9 Does not support plug & play. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. Sharp Digital Signage Software (option) Sharp Digital Signage Software is a versatile management software package that provides total support for the creation, scheduling, distribution, and display of a wide range of content for the PN-V602. PN-SS02 Network Version In network systems, PN-SS02 software enables programmes to be edited and stored on a networked PC then distributed via the network to up to 100 clients* according to a set schedule. Note: Networked clients must use PN-SV01 viewer version software PN-SV01 Viewer Version PN-SS01 Stand-Alone Version In stand-alone systems, PN-SS01 software enables programmes to be edited on a single PC for display on LCD monitors according to a set schedule. Programmes can be transferred to another client* via a USB thumb drive. Used on the client* side, PN-SV01 viewer software allows programmes edited with PN-SS01 or PN-SS02 software to be displayed on the client’s LCD monitors according to a set schedule. Network System Configuration** Stand-Alone System Configuration** PN-SS02 (network version) PN-SS01 (stand-alone version) PC (commercially available) for programme editing and distribution PN-SV01 PN-SV01 Client* Client* PN-SV01 (viewer version) LCD monitors PC (commercially available) for programme editing * Each client represents a separate PC and Sharp LCD monitor. ** Depending on the system, additional hardware such as a graphics board may be required. Client* Distributed by: JXCPNV602 ©SHARP CORP. (SEP. 2011) H1.2E Printed in Japan