RJ33B4AD0DT in 1/3-type B/W Progressive Scan CCD Area Sensor with 350K Pixels (2ch) High Speed and High Sensitivity including near-infrared light region (200frames/s @60MHz) Description The RJ33B4AD0DT is a 1/3-type(5.92mm) solid-state image sensor that consists of PN photo-diodes and CCDs(charge-coupled devices) with approximately 350K pixels. The sensor provides a stable high speed (200frames/s @60MHz) B/W image and high sensitivity including near-infrared light regions. ARRANGEMENT OF PIXELS Image pixels 660 (H) x 494 (V) Applications 7 Effective pixels 640 (H) x 480 (V) ・Industrial monitor cameras ・Video capturing devices for PCs etc. 10 10 5.92mm Features 7 ・ Number of image pixels ・ Sensitivity ・ Smear ratio ・ Frame rate ・ Signal Output ・ Color filter ・ Ambient operating temperature ・ Package 660H × 494V 4500mV @F4 1000lx with a 90% reflector, 1/30s accumulation -125dB 200frames/s @60MHz 2ch B/W -30 ºC to +85 ºC 24pinDIP(plastic) System Configuration HD-SDI OUT1 CCD OUT2 HD-SDI transmitter AFE ・CDS ・ADC ・TG ・V driver ISP Compression Ethernet transmitter Ethernet "iSHCCDⅡ“ and "iSHartina" are the trademarks of Sharp Corporation. The "iSHCCDⅡ" is an advanced CCD image sensor that drastically improves light efficiency by including near-infrared light region as a basic structure of "iSHCCD". The "iSHartina" series is a key device group of Sharp which realizes a next-generation sensing world. The circuit diagram and others included in this specifications are intended for use to explain typical application examples. Therefore, we take no responsibility for any problem as may occur due to the use of the included circuit and for any problem with industrial proprietary rights or other rights.