RJ32S4AD0DT in 2/3-type B/W Progressive Scan CCD Area Sensor with 5M Pixels High Sensitivity and High Efficiency and High Speed (15frames/s @60MHz) Description The RJ32S4AD0DT is a 2/3-type(11.02mm) solid-state image sensor that consists of PN photo-diodes and CCDs(charge-coupled devices) with approximately 5M pixels. The sensor provides a stable high-resolution B/W image and high sensitivity and high efficiency and high speed (15frames/s @60MHz). ARRANGEMENT OF PIXELS Image pixels 2456 (H) x 2058 (V) Applications 4 Effective pixels 2448 (H) x 2050 (V) ・Industrial monitor cameras ・Intelligent Transport System cameras ・Video capturing devices for PCs etc. 4 11.016mm 4 Features 4 ・ Number of image pixels ・ Sensitivity ・ Smear ratio ・ Frame rate ・ Signal Output ・ Color filter ・ Supply Voltages ・ Ambient operating temperature ・ Package 2456H × 2058V 800mV @F4 1000lx with a 90% reflector, 1/30s accumulation -110dB 15frames/s @60MHz 2ch B/W +13.5V/+3.3V/-6.5V -30 ºC to +85 ºC 28pinDIP(plastic) System Configuration HD-SDI OUT1 Four-power-supply CCD OUT2 HD-SDI transmitter AFE ・CDS ・ADC ・TG ・V driver ISP Compression Ethernet transmitter Ethernet "iSHCCD“ and "iSHartina" are the trademarks of Sharp Corporation. The “iSHCCD” is the CCD image sensor that introduced high-sensitivity and high-efficiency technologies developed by Sharp. The "iSHartina" series is a key device group of Sharp which realizes a next-generation sensing world. Sharp reserves the right to change products and specifications without prior notice. The circuit diagram and others included in this specifications are intended for use to explain typical application examples. Therefore, we take no responsibility for any problem as may occur due to the use of the included circuit and for any problem with industrial proprietary rights or other rights.