RJ33N3AD0LT in 1/3-type Color Progressive Scan CCD Area Sensor with 2M Pixels (2ch) High Speed and High Sensitivity including near-infrared light region (50frames/s @65MHz) Description The RJ33N3AD0LT is a 1/3-type(6.168mm) solid-state image sensor that consists of PN photo-diodes and CCDs(charge-coupled devices) with approximately 2M pixels. The sensor provides a stable high-resolution color image and high sensitivity and high efficiency and high speed (50frames/s @65MHz). ARRANGEMENT OF PIXELS Image pixels 1928(H) x 1088 (V) Applications 4 Effective pixels 1920(H) x 1080 (V) ・Industrial monitor cameras ・Intelligent Transport System cameras ・Video capturing devices for PCs etc. 4 6.168mm 4 4 Features ・ Number of image pixels ・ Sensitivity ・ Smear ratio ・ Frame rate ・ Signal Output ・ Color filter ・ Supply Voltages ・ Ambient operating temperature ・ Package 1928H × 1088V 470mV @F4 1000lx with a 90% reflector, 1/30s accumulation -110dB 50frames/s @65MHz 2ch R/G/B +13.5V/+3.3V/-6.5V -30 ºC to +85 ºC 40pinLCC(ceramic) System Configuration HD-SDI OUT1 CCD OUT2 HD-SDI transmitter AFE ・CDS ・ADC ・TG ・V driver ISP Compression Ethernet transmitter Ethernet "iSHCCDⅡ“ and "iSHartina" are the trademarks of Sharp Corporation. The "iSHCCDⅡ" is an advanced CCD image sensor that drastically improves light efficiency by including near-infrared light region as a basic structure of "iSHCCD". The "iSHartina" series is a key device group of Sharp which realizes a next-generation sensing world. The circuit diagram and others included in this specifications are intended for use to explain typical application examples. Therefore, we take no responsibility for any problem as may occur due to the use of the included circuit and for any problem with industrial proprietary rights or other rights.