PM-05 series - Total Power International

Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
PM-05
5W Output Switching Power Supply
series
¡½ Features :
¡EUniversal AC input / Full range
¡ Protections: Short circuit / Overload / Over voltage
E
¡ Ultra-miniature size, light weight
E
¡ Cooling by free air convection
E
¡ Isolation class¢º
E
¡ Medical safety approved (MOPP level)
E
¡ No load power consumption<0.5W
E
¡ 100% full load burn-in test
E
¡ Fixed switching frequency at 67KHz
E
¡ High reliability
E
¡ 3 years warranty
E
SPECIFICATION
MODEL
OUTPUT
PM-05-3.3
PM-05-5
PM-05-12
PM-05-15
PM-05-24
DC VOLTAGE
3.3V
5V
12V
15V
24V
RATED CURRENT
1.25A
1A
0.42A
0.33A
0.23A
CURRENT RANGE
0 ~ 1.25A
0 ~ 1A
0 ~ 0.42A
0 ~ 0.33A
0 ~ 0.23A
RATED POWER
4.125W
5W
5.04W
4.95W
5.52W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
150mVp-p
150mVp-p
240mVp-p
VOLTAGE TOLERANCE Note.3 ¡Ó3.0%
¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó2.0%
¡Ó1.0%
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
¡Ó0.5%
LOAD REGULATION
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó1.0%
¡Ó0.5%
SETUP, RISE TIME
1000ms, 20ms/230VAC
HOLD UP TIME (Typ.)
100ms/230VAC
VOLTAGE RANGE
85 ~ 264VAC
FREQUENCY RANGE
47 ~ 440Hz
74%
76%
LINE REGULATION
INPUT
EFFICIENCY (Typ.)
67%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.12A/115VAC
LEAKAGE CURRENT
71%
73%
0.08A/230VAC
COLD START 25A/115VAC
£g
45A/230VAC
OVERLOAD
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
13.8 ~ 16.2V
3.8 ~ 4.95V
5.75 ~ 6.75V
Protection type : Shut off o/p voltage, clamping by zener diode
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 4)
EMC EMISSION
17.25 ~ 20.25V
27.6 ~ 32.4V
-20 ~ +70¢J (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85¢J, 10 ~ 95% RH
¡Ó0.03%/¢J (0 ~ 50¢J)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
I/P-O/P:4KVAC
I/P-O/P:100M Ohms / 500VDC / 25¢J/ 70% RH
Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A
DIMENSION
62.85*50*19.7mm (L*W*H)
0.085Kg; 120pcs/11.2Kg/0.97CUFT
PACKING
NOTE
24ms/115VAC at full load
120 ~ 370VDC
Note.5 Touch current < 80 A/264VAC
PROTECTION
OTHERS
1000ms, 20ms/115VAC at full load
1513.4Khrs min.
MIL-HDBK-217F (25¢J)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Touch current was measured from primary input to DC output.
File Name:PM-05-SPEC 2012-09-03
Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com
PM-05
5W Output Switching Power Supply
Mechanical Specification
Case No. 948A
series
Unit:inch(mm)
0.306"(7.8mm)
1.97"(50mm)
0.295"
0.689"(17.5mm) (7.5mm)
1.85"(47mm)
0.041"(1.05mm)
2.475"(62.85mm)
AC/N
0.776"(19.7mm)
AC/L
BOTTOM
VIEW
0.138"
(3.5¡Ó1mm)
-V
+V
0.789"(20.04mm)
0.59"(15mm)
Block Diagram
fosc : 67KHz
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PWM
CONTROL
Derating Curve
+V
-V
DETECTION
CIRCUIT
Output Derating VS Input Voltage
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-20
0
10
20
30
40
50
AMBIENT TEMPERATURE (¢J)
60
70
(HORIZONTAL)
60
50
40
85
95
100
115
120
140
160
180
200
220
240
264
INPUT VOLTAGE (VAC) 60Hz
File Name:PM-05-SPEC 2012-09-03