TAPE AND REEL (CRYSTAL) Surface Mount Miniature Quartz Crystal Reference: EIA-481 TM 7" Reels or 13" Reels Notes: 1.Reel sketch is for reference only. 2.The center hole (hub hole) diameter is per EIA-481 standard 13 mm size. Carrier tape material: 3000 Black Conductive Polycarbonate REEL SELECTION Unless specified otherwise, the following reel sizes and orientation will be used for the quantities listed. CRYSTAL MAX QUANTITIES PER REEL TYPE 180 mm (7 in.) 330 mm (13 in.) 1000 2000 2000 3000 3000 2000 3000 2000 3000 3000 4000 8000 8000 12000 12000 8000 12000 8000 12000 12000 CX1 SM CX2 SM CX3 SM CX4 SM CX4 SM (VP) CX6 SM CX7 SM CX8 SM CX9 SM CX14SM Random Single Pad Towards Sprocket Holes Random Random Dual Pads Toward Sprocket Holes Random Random Random Random Random CRYSTAL ORIENTATION IN TAPE CAVITY PART TO PART INDEXING P1 AND A0 & B0 DIMENSIONS Dimensions are in millimeters A0 B0 Tape Width 8.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 2.8 2.8 2.1 2.1 2.8 2.3 2.8 1.8 2.9 8.4 7.1 7.1 5.5 5.5 7.1 4.4 7.1 4.5 3.6 16 16 16 16 16 16 16 16 16 12 P0 (4 mm Pitch) CX14 Marking (When Specified) CX6 & CX9 Marking (When Specified) Sxx 1.5 Dia. min Top View P1 Sxxxx CX1 CX2 CX3 CX4 CX4 (VP) CX6 CX7 CX8 CX9 CX14 ORIENTATION (Unless Specified Otherwise) "XXXX" indicates a 4-digit datecode "XX" indicates a 2-digit datecode Bottom View T-Pads Toward Holes (When Specified) 1.75 CX4 SM (VP) (Std. Orientaton) CX2 (Std. Orientation) F W B0 Cavity Center Line (P1 ) For 16 mm tape width, W = 16, F = 7.5 For 12 mm tape width, W = 12, F = 5.5 10109 - Rev E IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S A0 TAPE AND REEL (OSCILLATOR) Surface Mount Miniature Quartz Crystal Oscillator Reference: EIA-481 TM 7" Reels or 13" Reels Notes: 1.Reel sketch is for reference only. 2.The center hole (hub hole) diameter is per EIA-481 standard 13 mm size. OSCILLATOR ORIENTATION IN TAPE CAVITY - See pin 1 locator (▼) REEL SELECTION Unless specified otherwise, the following reel sizes will be used for the quantities listed. OSCILLATOR Top View C XO X MAX QUANTITIES PER REEL TYPE 8.0 8.0 16.0 16.0 16.0 8.0 4.0 5.4 5.4 10.6 10.6 10.6 5.6 2.9 6.9 6.9 5.1 5.1 5.1 7.7 3.6 16 16 16 16 16 16 12 XX Tape Width 44.2M B0 XX A0 CXO, LSM XXXX XXXX 19.66M 19.66M LSC 1.75 Pin 1 F W B0 "XX" indicates a 2-digit datecode Pin 1 HGXO P1 P0 (4 mm pitch) 44.2M CXOM CXO3M CXO LSC LSM HGXO CXOX XX Dimensions are in millimeters. 44.2M PART TO PART INDEXING P1 AND A0 & B0 DIMENSIONS S XX 3000 3000 2000 2000 2000 3000 12000 CXOM, CXO3M S XX 800 800 500 500 500 800 3000 S XX 330 mm (13 in.) S XX 180 mm (7 in.) CXOM CX03M CXO LSC LSM HGXO CXOX 1.5 Dia. min. Carrier tape material: 3000 Black Conductive Polycarbonate "XXXX" indicates a 4-digit datecode For 16 mm tape width, W = 16, F = 7.5 For 12 mm tape width, W = 12, F = 5.5 Cavity Center Line (P1 ) 1.5 Dia. min. 10109 - Rev E IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S A0