10137 (For use in Series Oscillator Circuits)

CX2HSM CRYSTAL
16 kHz to 600 kHz
Miniature Surface Mount
Quartz Crystal for Series Oscillators
DESCRIPTION
The CX2HSM quartz crystals are leadless devices designed
for surface mounting on printed circuit boards or hybrid
substrates. These miniature crystals are intended to be
used in Series oscillators. They are hermetically sealed in a
rugged, miniature ceramic package. The CX2HSM crystal
is manufactured using the STATEK-developed
photolithographic process, and was designed utilizing the
experience acquired by producing millions of crystals for
industrial, commercial, military and medical applications.
Maximum process temperature should not exceed 260OC.
actual size
side view
Glass Lid Shown
PACKAGE DIMENSIONS
B
1
2
FEATURES
3
High shock resistance
E
C
Low aging
Full military testing available
TYP.
Designed and manufactured in the USA
SUGGESTED LAND PATTERN
0.105 (2.67)
GRID
COURTYARD
1
2
0.060 (1.52)
inches (mm)
F
D
Compatible with hybrid or PC board packaging
0.113
(2.87)
H
G
Miniature tuning fork design
A
I
0.060 (1.52)
MAX.
DIM
inches
mm
inches
mm
A
0.260
6.60
0.275
6.99
B
0.094
2.39
0.108
2.74
C
-
-
D
0.035
0.89
0.045
1.14
E
0.059
1.50
0.069
1.75
see below
F
0.050
1.27
0.060
1.52
G
0.105
2.67
0.115
2.92
H
0.155
3.94
0.165
4.19
I
0.210
5.33
0.220
5.59
DIM “C”
GLASS LID
CERAMIC LID
MAX
inches
mm
inches
mm
SM1
0.065
1.65
0.075
1.91
SM2/SM4
0.067
1.70
0.077
1.96
SM3/SM5
0.070
1.78
0.080
2.03
CONVENTIONAL SERIES
OSCILLATOR CIRCUIT
Note: Terminal 1 is electrically connected internally to terminal 3
OSCILLATOR
CX-2H XTAL
BUFFER
Contact factory for
design guidelines
EQUIVALENT CIRCUIT
C0
1
L1
C1
R1
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
2
10137 - Rev C
FIGURE 1
CX2H TYPICAL MOTIONAL RESISTANCE (R1)
SPECIFICATIONS
1000
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Frequency Range
16 kHz to 600 kHz
500
Motional Resistance (R1)
Figure 1
MAX: 16-169.9 kHz, 2x Typ.
R1(k!)
Standard Calibration Tolerance1 (see table below)
170-600 kHz, 2.5x Typ.
Motional Capacitance (C1)
Figure 2
Quality Factor (Q)
Figure 3
MIN is 0.25x Typ.
Shunt Capacitance (C0)
2.0 pF MAX.
Drive Level
16-24.9 kHz 1.5 µW MAX.
25-600 kHz 3.0 µW MAX.
Turning Point (T0)2
Figure 4
100
50
20
10
16
50
100
200
600
Frequency (kHz)
FIGURE 2
CX2H TYPICAL MOTIONAL CAPACITANCE (C1)
5 ppm MAX
Shock, survival3
1,500 g, 0.3 ms, 1/2 sine
Vibration, survival3
10 g RMS 20-2,000 Hz
Operating Temp. Range
-10OC to +70OC (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
-55OC to +125OC
Max Process Temperature
260O C for 20 sec.
2
1.0
0.5
16
50
100
200
600
Frequency (kHz)
FIGURE 3
CX2H TYPICAL QUALITY FACTOR (Q)
50
1. Tighter frequency calibration available.
2. Other turning point available.
3. Higher shock and vibration available.
CX2H Standard Calibration Tolerance at 250C
(in 1000's)
Storage Temp. Range
C1(fF)
5
Temperature Coefficient (k) -0.035 ppm/OC2
Aging, first year
200
20
10
5
Frequency Range (kHz)
75-169.9
170-249.9
30 ppm
(0.003%)
50 ppm
(0.005%)
+
_
+
_
+
_
+
_
+
_
+
_
100 ppm
(0.01%)
100 ppm
(0.01%)
100 ppm
(0.01%)
1000 ppm
(0.1%)
+
_
1000 ppm
(0.1%)
200 ppm
(0.02%)
+
_
+
_
200 ppm
(0.02%)
500 ppm
(0.05%)
+
_
2000 ppm
(0.2%)
5000 ppm
(0.5%)
2
HOW TO ORDER CX2HSM CRYSTALS
CX2H
S
“S” if special or
custom design.
Blank if Std.
Blank = Glass Lid
C = Ceramic Lid
C
SM1
32.768K
Frequency
K = kHz
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
,
30
Calibration
Tolerance
@ 25OC
(in ppm)
TERMINATIONS
Designation
SM1
SM2
SM3
SM4
SM5
Termination
Gold Plated
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
16
50
100
200
600
Frequency (kHz)
FIGURE 4
CX2H TYPICAL TURNING POINT TEMP. (T0)
O
+
_
250-600
+
_
TO( C)
16-74.9
+80
+70
+60
+50
+40
+30
+20
+10
0
-10
-20
16
50
100
200
600
Frequency (kHz)
Note: Frequency f at temperature T is related to frequency f0 at
turning point temperature T0 by:
f-f0 = k(T-T )2
0
f0
PACKAGING OPTIONS
CX2HSM
- Tray Pack
-16mm tape, 7” or 13” reels
(Reference tape and reel data sheet 10109)
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
10137 - Rev C