Mini-Com Mini-Jack Jack Modules Part Numbers: CJ588**Y, CJ5E88**Y, CJD588**Y, CJ64**Y, CJ66**Y, CJ88**Y INSTALLATION INSTRUCTIONS © Panduit Corp. 2011 PN45H TERMINATION 1 Mini-Com Mini-Jack Color-Coded Wire Positions Remove all but one twist per pair, smooth conductors and arrange in proper color sequence. Part Numbers - CJ588**Y, CJ5E88**Y, CJD588**Y T568A 6 4 5 3 1 2 7 8 2 1 3 5 4 6 8 7 GREEN WHITE/GREEN WHITE/ORANGE WHITE/BLUE BLUE ORANGE BROWN WHITE/BROWN T568B R3 T3 T2 T1 R1 R2 R4 T4 2 1 3 5 4 6 8 7 ORANGE WHITE/ORANGE WHITE/GREEN WHITE/BLUE BLUE GREEN BROWN WHITE/BROWN R2 T2 T3 T1 R1 R3 R4 T4 See Page 2 for CJ64/66/88 Series Wiring Sequences 2 3 CWST Snipping Tool 4 5 CWST 6 7 CJT SNAP TOOL (OR) ** Denotes color. For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2011 PN45H TERMINATION CAP REMOVAL 2 1 CATEGORY 3 Mini-Jack CJ64/66/88 SERIES WIRING SEQUENCES 10 Base-T 1 WHT/GRN T3 2 GRN R3 3 WHT/BRN T4 4 NC NC 5 NC NC 6 BRN R4 7 NC NC 8 NC NC EIA/TIA 568A, ISDN 1 2 3 4 5 6 7 8 WHT/GRN GRN WHT/ORG BLU WHT/BLU ORG WHT/BRN BRN T3 R3 T2 R1 T1 R2 T4 R4 USOC 4-Wire (8 Pin Jack) RJ45, USOC 8-Wire EIA/TIA 568B, AT&T 258A, WECO 1 NC NC 2 NC NC 3 WHT/ORG T2 4 BLU R1 5 WHT/BLU T1 6 ORG R2 7 NC NC 8 NC NC 1 BRN R4 2 WHT/GRN T3 3 WHT/ORG T2 4 BLU R1 5 WHT/BLU T1 6 ORG R2 7 GRN R3 8 WHT/BRN T4 1 WHT/ORG T2 2 ORG R2 3 WHT/GRN T3 4 BLU R1 5 WHT/BLU T1 6 GRN R3 7 WHT/BRN T4 8 BRN R4 USOC 6-Wire (8 Pin Jack) USOC 4-Wire, in 6 pin 1 2 WHT/ORG T2 3 BLU R1 4 WHT/BLU T1 5 ORG R2 6 1 2 3 4 5 6 7 8 NC WHT/GRN WHT/ORG BLU WHT/BLU ORG GRN NC NC T3 T2 R1 T1 R2 R3 NC USOC, RJ11/RJ25 1 WHT/GRN T3 2 WHT/ORG T2 3 BLU R1 4 WHT/BLU T1 5 ORG R2 6 GRN R3 WIRING DIAGRAMS FOR CJ588, CJ5E88, CJD588, CJ64/66/88 SERIES Pin #’s WIRING DIAGRAM 1 WIRING DIAGRAM 8 Part Numbers CJ588, CJ5E88, CJD588 Insulation Modular Plug Displacement Contacts Contacts 1 2 3 4 5 6 7 8 2 1 3 5 4 6 8 7 Part Number CJ64 Part Number CJ88 Part Number CJ66 Insulation Insulation Insulation Modular Plug Modular Plug Modular Plug Displacement Displacement Displacement Contacts Contacts Contacts Contacts Contacts Contacts 1 2 3 4 5 6 2 3 4 5 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 6 Notes: 1. For specified performance, follow TIA/EIA 568-B installation guidelines. 2. Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with insulated conductor outside diameter ranging between 0.035 inch (0.88mm) and 0.048 inch (1.2mm). 3. Jack Modules may be re-terminated a minimum of 10 times. 4. For technical and performance information, consult Panduit Technical Support. 5. MUAJC588 Jack Modules suit a standard switch mechanism pattern on various Australian faceplates. 6. For Mini-Com Mini-Jack Shielded Jack Module instructions, refer to PN348*. As with all Wiring Accessories, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Fax: (708) 444-6993 1 2 3 4 5 6 7 8