TG RACEWAY SYSTEM INSTALLATION INSTRUCTIONS FITTINGS continued END CAP (WITH CONDUIT DRILL GUIDE) 1 3 FOR USE WITH PANDUIT SURFACE RACEWAY ROUTING SYSTEM TG RACEWAY SYSTEM 2 Part Numbers: TG70B, T70C, TG70BC, T70CC, TG70WR TG80B, TEC80, TG80BC, TECFC80, TG80WR TG86B, TG86C, TG86BC, TCFC105, TG86WR TGRA, TGEC, TGDW INSTALLATION INSTRUCTIONS ©Panduit Corp. 2000 Printed in U.S.A. TG70 WIREFILL PROFILES 4 6 5 2 1 3 ACCESSORIES DIVIDER WALL 1 2 3 Must use wire retainers with divider wall to ensure channel separation for power applications. WIRE RETAINER 4a 4b 5a TG70 WIREFILL CHART *Elecrical Cables 18”(457.2mm)-24”(609.6mm) 2a 1 2b 2 3 See Fill # Wirefill #1: Data only using Screw-On Faceplates Wirefill #2: Data only using Snap-On Bezels 1 ** ** ** 2 ** ** ** 3 40 40 38 4A 28 28 26 4B ** ** ** 5A 28 28 26 5B ** ** ** Wirefill #3: TG-70 Raceway with no Devices Instruction Sheet RW97 WORLDWIDE SUBSIDIARIES AND SALES OFFICES 17301 Ridgeland Avenue Tinley Park, Il. 60477-3091 Web Site: www.panduit.com RACEWAY SYSTEMS DIVISION Technical Support: 866-405-6656 Fax: 866-449-1702 Email: [email protected] AWG 14 10 12 THHN/T90 0.105 0.122 0.153 MAX MAX MAX Raceway Channel Wirefill Configurations Wirefill #4: Power and Data using Snap-On Bezels and 3-Sided Power Box Wirefill #5: Power and Data using Snap-On Bezels and 3-Sided Power Box For Technical Assistance call: 866-405-6656 * WIRES NOT BUNDLED 5b TG RACEWAY SYSTEM INSTALLATION INSTRUCTIONS BASE &COVER 1 1a TG RACEWAY SYSTEM INSTALLATION INSTRUCTIONS FITTINGS continued RIGHT ANGLE 2 3 1 The mounting hardware used to secure the raceway shall be appropriate for the mounting 8”(203.2mm) 2 3 4 FITTINGS BASE COUPLER 2 6 5 3 1 4 END CAP 5 2 1 3 COVER COUPLER 1 3 2 3b 3a 4 0.625”(15.9mm) 0.800”(20.3mm) For Technical Assistance call: 866-405-6656 For Technical Assistance call: 866-405-6656