THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES: 1. KIT COMES FULLY ASSEMBLED 2. KIT INCLUDES BUSBAR, MOUNTING BRACKETS, INSULATORS, AND MOUNTING HARDWARE. 3. DIMENSIONS IN PARENTHESIS ARE MILLIMETERS. L C .44 DIA THRU-HOLE [11.2] US LISTED GROUNDING AND BONDING EQUIPMENT W S1 INSULATION MOUNTING HOLE 2.75 [69.9] OVERALL HEIGHT .25 [6.4] PANDUIT PART NUMBER DIMENSIONS - IN [mm] HOLE PATTERN INFORMATION HOLE SIZE HOLE SPACING # OF HOLE SETS MOUNTING BRACKET HARDWARE MOUNTING KIT QUANTITY 2 L W GB2D0008TPI-1 12.00 [304.8] 2.00 [50.8] 7/16" 1.00 8 SETS BUTTON HEAD SCREW GB2D0021TPI-1 24.00 [609.6] 2.00 [50.8] 7/16" 1.00 21 SETS BUTTON HEAD SCREW 2 GB2D0033TPI-1 36.00 [914.4] 2.00 [50.8] 7/16" 1.00 33 SETS BUTTON HEAD SCREW 2 GB2D0044TPI-1 48.00 [1219.2] 2.00 [50.8] 7/16" 1.00 44 SETS HEX BOLT 3 GB2D0056TPI-1 60.00 [1524.0] 2.00 [50.8] 7/16" 1.00 56 SETS HEX BOLT 3 .44 DIA TYP. [11.2] ASSEMBLED AS SHOWN 05 12/10 JHNU JHNU 04 01/09 JESH JESH 03 11/08 JHNU JHNU 02 11/08 JHNU DWDA 01 7/08 00 5/08 REV DATE REVISED AGENCY LOGO N41743BB-C41743 FLD CORP. FLD UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCES ARE: (.X) (.XXX) (.XX) ANGLES REVISED DRAWING LAYOUT, REMOVED BRACKET VIEWS ADDED MOUNTING HARDWARE COLUMN TO TABLE JHNU DWDA ADDED HOLE PATTERN COLUMN TO TABLE DRAWN BY JHNU DWDA DATE BY CHK JHNU DRAWING RELEASED DESCRIPTION TINLEY PARK, ILLINOIS "D" PATTERN GROUNDING BUSBARS CUSTOMER DRAWING UPDATED TITLE BLOCK "D" PATTERN GROUNDING BUS BARS CUSTOMER DRAWING. WAS "A" PATTERN GROUNDING BUS BARS CUSTOMER DRAWING ECN -R SUP CHK'D 1/08 MAT'L: UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION SCALE NONE DRAWING NO / CAD FILE C41743_05 DWG B SIZE