SSBD1045CT/CTF Main Product Characteristics: IF 2×5A VRRM 45V Tj(max) 150℃ Vf(max) 0.55V TO220 TO220F SSBD1045CT SSBD1045CTF Schematic Diagram Features and Benefits: High Junction Temperature High ESD Protection High Forward & Reverse Surge capability Description: Schottky Barrier Rectifier designed for high frequency switch model power supplies such as adaptors and DC/DC convertors; this product special design for high forward and reverse surge capability Absolute Rating: Symbol VRRM VR(RMS) Characterizes Value Unit Peak Repetitive Reverse Voltage 45 V RMS Reverse Voltage 31 V Per diode 5 A Per device 10 A 120 A IF(AV) Average Forward Current IFSM Non Repetitive Surge Forward Current(tp=8.3ms sinusoidal) IRRM Peak Repetitive Reverse Surge Current(Tp=2us) 2 A TJ Maximum operation Junction Temperature Range -55~150 ℃ Tstg Storage Temperature Range -55~150 ℃ Value Unit TO220 2 ℃/W TO220F 4 ℃/W Thermal Resistance Symbol RθJC RθJC Characterizes Maximum Thermal Resistance Junction To Case(per leg) Electrical Characterizes @TA=25℃ unless otherwise specified Symbol Characterizes Min VR Reverse Breakdown Voltage VF Forward Voltage Drop IR Leakage Current ©Silikron Semiconductor CO., LTD. Typ Max 45 V 0.55 0.53 0.2 50 2011.5.26 www.silikron.com Unit V mA Version: 2.1 Test Condition IR=0.5mA IF=5A, TJ=25℃ IF=5A, TJ=125℃ VR=45V, TJ=25℃ VR=45V, TJ=125℃ page 1of6 SSBD1045CT/CTF I-V Curves: Figure 1：Typical Forward Characteristics Figure 2：Typical Capacitance Characteristics Figure 3：Typical Reverse Characteristics ©Silikron Semiconductor CO., LTD. 2011.5.26 www.silikron.com Version: 2.1 page 2of6 SSBD1045CT/CTF Mechanical Data： TO220: TO220 PACKAGE OUTLINE DIMENSION_GN E ФP A ϴ1 D D2 ФP1 ϴ3 ϴ2 D1 b1 b A1 ϴ4 L c e Symbol A A1 b b1 c D D1 D2 E E1 ФP ФP1 e L ϴ1 ϴ2 Dimension In Millimeters Min Nom Max 1.300 2.200 2.400 2.600 1.270 1.270 1.370 1.470 0.500 15.600 28.700 9.150 9.900 10.000 10.100 10.160 3.600 1.500 2.54BSC 12.900 13.100 13.300 70 70 ϴ3 - ϴ4 - ©Silikron Semiconductor CO., LTD. E1 Dimension In Inches Nom Max 0.051 0.094 0.102 0.050 0.054 0.058 0.020 0.614 1.130 0.360 0.394 0.398 0.400 0.142 0.059 0.1BSC 0.508 0.516 0.524 70 Min 0.087 0.050 0.390 - 70 - 3 - 5 0 70 90 30 - 10 30 50 0 2011.5.26 www.silikron.com - Version: 2.1 page 3of6 SSBD1045CT/CTF TO220F： ©Silikron Semiconductor CO., LTD. 2011.5.26 www.silikron.com Version: 2.1 page 4of6 SSBD1045CT/CTF Ordering and Marking Information Device Marking: SSBD1045CT&SSBD1045CTF Package (Available) TO-220&TO220F Operating Temperature Range C : -55 to 150 ºC Devices per Unit Packag Units/ Tubes/Inne Units/Inne e Type Tube r r Box Box 50 20 1000 TO220 20 1000 TO220F 50 Reliability Test Program Test Item Conditions High Temperature Reverse Bias(HTRB) Tj=125℃ to 175℃ @ 80% of Max VDSS/VCES/VR ©Silikron Semiconductor CO., LTD. Inner Boxes/Carton Box Units/Carto n Box 6 6000 6 6000 Duration Sample Size 168 hours 500 hours 1000 hours 3 lots x 77 devices 2011.5.26 www.silikron.com Version: 2.1 page 5of6 SSBD1045CT/CTF ATTENTION: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all Silikron products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your Silikron representative nearest you before using any Silikron products described or contained herein in such applications. Silikron assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all Silikron products described or contained herein. Specifications of any and all Silikron products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all Silikron products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of Silikron Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product that you intend to use. This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change without notice. Customer Service Worldwide Sales and Service: [email protected] Technical Support: [email protected] Suzhou Silikron Semiconductor Corp. 11A, 428 Xinglong Street, Suzhou Industrial Park, P.R.China TEL: (86-512) 62560688 FAX: (86-512) 65160705 E-mail: [email protected] ©Silikron Semiconductor CO., LTD. 2011.5.26 www.silikron.com Version: 2.1 page 6of6