17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Bluetooth® + Wireless LAN +FM Module Bluetooth® 3.0, 2.1+EDR IEEE802.11b/g/n FM WYSBMVGX8 Brief Data Report The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN 1/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Document constituent list Control name Document Page General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Pin Layout 1/1 1/1 1/2 – 2/2 1/1 1/1 1/2 - 2/2 Rev. record 17-Dec.-2012> Ver.1.0 Initial Release TAIYO YUDEN 2/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. Control name HD-AG-A091220 (1/1) General Items Scope This specification (“Specification”) applies to the hybrid IC for use Wireless LAN, Bluetooth®, FM module (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 1. 2. 3. 4. 5. 6. 7. 8. Part Number: WYSBMVGX8 Function: Radio frequency transfer Module. (IEEE802.11bgn+BT+FM standard conformity) Application: Cellular phone RoHS Directive (2002/95/EC).comply MSL : Level 3 Outline: 73-pin leadless chip carrier Marking: Part Number, Lot Number Features: -IEEE802.11bgn standard conformity -Bluetooth® 3.0, 2.1+EDR (QDID: B016944) Interface: SDIO, UART, PCM, I2C, I2S Embedded MPU for reducing loads on host processor Built-in EEPROM 9. WLAN Channel Supported: 1~13ch in 11bgn mode 10.WLAN Data Rate Supported: 1/2/5.5/11 Mbps in 11b mode 6/9/12/18/24/36/48/54 Mbps in 11g mode MCS0~MCS7 (HT20/HT40) in 11n mode 11. Host Interface: SDIO (4bits), upto 50MHz 12.Security: WEP (64/128), TKIP, AES, WPA, WPA2, WAPI 13. Packing: Packaging method: Tape and Reel Packaging unit: 1500pcs/reel TAIYO YUDEN 3/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. HD-AM-A091220 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Symbol Rating Min. Typ. Max. Unit Supply voltage 1 VIO - 4.0 V Supply voltage 2 1.8V - 1.98 V Supply voltage 3 1.8V_1 - 1.98 V Supply voltage 4 3.3V - 5.6 V Storage temperature range Tstg -30 100 Degrees C Operation temperature range Topr -20 70 Degrees C 25 Remark Recommendation operating range Item Symbol Rating Min. Typ. Max. Unit Supply voltage 1 VIO 1.62/2.97 1.8/3.3 1.98/3.63 V Supply voltage 2 1.8V 1.71 1.8 1.89 V Supply voltage 3 1.8V_1 1.71 1.8 1.89 V Supply voltage 4 3.3V 3.0 3.3 4.3 V TAIYO YUDEN Remark 4/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. HD-AE-A091220 Control name Electrical characteristics (1/2) SDIO Interface Specifications The Specification applies for Topr.= -20 to 70 degrees C , Supply voltage=Typical voltage Parameter Symbol Condition Min Typ Max Normal 0 - 25 High Speed 0 - 50 Normal 10 - - High Speed 7 - - Normal 10 - - High Speed 7 - - Normal 5 - - High Speed 6 - - Normal 5 - - High Speed 2 - - - - 14 ns 2.5 - - ns 1 Input SDIO_CLK Frequency Tf 2 Input SDIO_CLK High Time Tch 3 Input SDIO_CLK Tcl 4 Input SDIO_CMD, DATA[3:0] Setup time Tsu 5 Input SDIO_CMD, DATA[3:0] Hold time Thd 6 Output SDIO_CMD, DATA[3:0] Delay time Tod - 7 Output SDIO_CMD, DATA[3:0] Hold time Toh High Speed Low Time Unit Remark MHz ns ns ns ns Tf Normal Mode SD_CLK Tch HOST > WiFi Tsu Tcl Thd SD_CMD SD_DATA[3:0] WiFi > HOST Tod SD_CMD SD_DATA[3:0] High Speed Mode Tf SD_CLK Tch HOST > WiFi Tsu Tcl Thd SD_CMD SD_DATA[3:0] Toh WiFi > HOST Tod SD_CMD SD_DATA[3:0] TAIYO YUDEN 5/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. HD-AE-A091220 (2/2) Control name Electrical characteristics WLAN RF Specification 11b(11Mbps) 11g(54Mbps) Tx Rx Tx Rx Condition Value 15 -86 13 -72 Unit dBm dBm dBm dBm Condition Power Sensitivity Value 5 -86 Unit dBm dBm Condition 11b / 11Mbps 11b / 11Mbps Basic Rate Deep Sleep Value 405 230 50 3.0 Unit mW mW mW mW Power Sensitivity Power Sensitivity BT RF Specification Basic Rate Tx Rx Power Consumption WLAN Tx WLAN Rx BT Low Power TAIYO YUDEN 6/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 Control No. HD-MC-A091220 Block Diagram TAIYO YUDEN (1/1) Control name Circuit Schematic TAIYO YUDEN 7/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 Control No. HD-AD-A091220 TAIYO YUDEN (1/1) Control name Outline/Appearance OUTLINE 8.5+/-0.2 8.0+/-0.2 WYSBMVGX8 Lot No. 1.2 Max A B C D E F G H J K L 1 2 3 4 5 6 7 8 9 10 11 F6 Bottom View TAIYO YUDEN 8/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. HD-BA-A091220 Pin Descriptions (1/2) Control name Pin Layout Loc. Pin Name I/O Type Pwr Domain Description A1 GND P GND - A2 GPIO0 IO VIO GPIO0 ground A3 GPIO4 IO VIO GPIO4 A4 SD_CMD IO VIO SDIO command A5 SD_CLK I VIO SDIO clock input A6 SD_DATA2 IO VIO SDIO data-2 A7 SLP_CLK I 1.8V Sleep clock input A8 FM_ANT_RF_GND P GND FM RF Receive Antenna Ground A9 FM_ANT_RX I 1.8V FM RF Receive Antenna A10 FM_ANT_TX O 1.8V FM RF Transmit Antenna A11 GND P ground GND - B1 VIO P power VIO 1.8V/3.3V Digital I/O Supply B2 1.2V_OUT P power 1.2V LDO 1.2V Voltage Output B3 1.2V P power 1.2V LDO 1.2V Voltage Intput B4 SD_DATA3 IO VIO SDIO data-3 B5 SD_DATA1 IO VIO SDIO data-1 B6 SD_DATA0 IO VO SDIO data-0 B7 GND P ground GND - B8 GND P ground GND - B9 GND P ground GND - B10 GND P ground GND - B11 FM_AD_IN_R I 1.8V FM Audio input Right C1 3.3V P power 3.3V 3.3V Supply Voltage C2 VDD30 P power VDD30 3.0V for decupling C10 GND P ground GND - C11 FM_AD_OUT_R O 1.8V FM Audio output Right D1 1.8V P 1.8V 1.8V Supply Voltage D2 GPIO16 IO VIO WLAN -> Host wakeup D10 GND P GND - D11 FM_AD_IN_L I 1.8V FM Audio input Left E1 GND P ground GND - E2 GND P ground GND - E10 GND P ground GND - E11 FM_AD_OUT_L O 1.8V FM Audio output Left F1 RES F2 GND P F6 GND P ground power ground (Reserved) GND ground GND - TAIYO YUDEN 9/10 17-Dec-2012 Ver.1.0 Preliminary & Confidential WYSBMVGX8 TAIYO YUDEN Control No. HD-BA-A091220 Loc. (2/2) Control name Pin Layout Pin Name I/O Type Pwr Domain F10 TDI I F11 GND P VIO JTAG TDI ground GND - G1 REF_CLK I G2 GND P 1.8V Oscillator / System clock Input. ground GND - G10 PDN I VIO Power down G11 I2C_DAT IO VIO I2C slave-compatible interface data signal power Description H1 1.8V_1 P 1.8V_1 1.8V Supply Voltage for WLAN H2 PCM_SYNC IO VIO PCM_SYNC(input/output), I2S_LRCLK(input/output) H10 GPIO18 IO VIO GPIO18 H11 I2C_CLK IO VIO I2C slave-compatible interface clock signal J1 PCM_CLK IO VIO PCM_CLK(input, output), I2S_BCLK(input, output) J2 PCM_DIN IO VIO PCM_DIN(input), I2S_DIN(input) J10 GND P ground GND - J11 GND P ground GND - K1 PCM_DOUT IO VIO PCM_DOUT(output), I2S_DOUT(output) K2 UART_RTS IO VIO UART_RTSn(output)(active low) K3 UART_SIN IO VIO UART_SIN(input) K4 I2S_DOUT IO VIO I2S_DOUT(output) Separate I2S interface K5 I2S_DIN IO VIO I2S_DIN(input) Separate I2S interface K6 I2S_BCLK IO VIO I2S_BCLK(input/output) Separate I2S interface K7 RESETN I VIO Reset(active low) K8 TDO IO VIO JTAG TDO(output) K9 TMS I K10 GND P K11 WLBT_ANT IO - - WLAN BT Antenna L1 GND P ground GND - L2 UART_SOUT IO VIO UART_SOUT(output) L3 UART_CTS IO VIO UART_CTSn(input)(active low) L4 I2S_LRCLK IO VIO I2S_LRCLK(input/output) Separate I2S interface L5 I2S_MCLK IO VIO I2S_CCLK(input/output), PCM_MCLK(optional, output) L6 HM I VDD30 L7 RES ground VIO JTAG TMS(input) GND - Host mode select (Reserved) L8 RES L9 TCK IO (Reserved) L10 GND P ground GND - L11 GND P ground GND - VIO JTAG TCK(input) TAIYO YUDEN 10/10