UMS UNIQUE SPACE SOLUTION A complete selection of catalogue Class S products For many years, UMS has served the needs of the international space community by offering an extensive selection of space evaluated processes: • Low Noise PHEMT (PH25, PH15) • Power MESFET (HP07) • Power PHEMT (PPH25X, PPH15, ...) • Power HBT (HB20S, HB20P) • Analog & Digital HBT (HB20M) • Schottky Diode (BES) UMS is now pleased to extend this offer with the introduction of Hi-Rel MMIC products for space use. The new Class S space product selection is certified and qualified as Flight Model according to ESA specifications and MIL-PRF-38534. CND2047 CHS5100 CHP6013 CHX2089 LNA MPA HPA VVA Misc. Non-Exhaustive List of Available Products for Space Applications CHT4016 CHA2294 CHT4690 CHT4694 CHT3091 CHA7012 CHA7215/CHA7115 CHA3666 CHA3023 CHA3801 CHA3063 CHA2066 CHA2190 CHA2090 CHA2063 DC-10GHz CHA2098 10-20GHz CHA3093 CHA3689 CHA2069 CHA2092 20-30GHz CHA2095 CHA2394 30-40GHz CHA2194 CHA2157 40-65GHz Complete datasheets and additional information on Class S products are available at: www.ums-gaas.com Hermetic packages on request Hi-Rel Space Qualification Flow UMS is offering catalogue products, ASIC’s and Foundry for space use. The Class S space products are qualified for Flight Model and processed on ESA evaluated technologies. Discrete Die Lot Qualification based on ESA/SCC 9010 and MIL-PRF-38534, Table C-II WAFER ACCEPTANCE TEST TEST TEST CONDITIONS TESTED SAMPLES 100% DC & RF testing As per data sheet or detail specification 100% Visual inspection MIL-STD-883 Method 2010, Cond.A 100% Wire bond evaluation MIL-STD-883 Method 2011 (1 failure allowed) Die shear test MIL-STD-883 Method 2019 (0 failure allowed) SEM MIL-STD-883 Method 2018 4 20 LOT ACCEPTANCE TEST TEST TEST CONDITIONS TESTED SAMPLES Device mounting Sampling for element evaluation 12 Internal visual inspection MIL-STD-883 Method 2010, Cond.A 12 Temperature cycling (note 1) MIL-STD-883 Method 1010, Cond.C 12 Initial electrical test As per data sheet or detail specification 12 Burn in 240H @ Tj=175°C (or Ta max=125°C), DC biased 12 Post burn in electrical test As per data sheet or detail specification 12 Steady-state life 1000H @ Tj=175°C (or Ta max=125°C), DC biased 10 Final electrical test As per data sheet or detail specification (0 failure allowed) 10 Note 1: performed when the element evaluation can be packaged. Contact us: All UMS products can be ordered with the generic extension S. For example: • CHA2066-99S space grade • CHA2066-99F commercial grade UMS SAS - North Europe, Ph: +33 1 69 33 02 26 e-mail: [email protected] UMS GmbH - Germany, Ph: +49 731 505 30 80 e-mail: [email protected] UMS USA, Inc. - America, Ph: +1 978 905 3162 e-mail: [email protected] UMS SAS - South Europe, Ph: +39 0765 480 434 e-mail: [email protected] UMS - Asia, Ph: +86 21 6103 1703 e-mail: [email protected] Worlwide distributor: Richardson RFPD, Inc. – www.richardsonrfpd.com UMS 2011/2012 - Printed on PEFC paper - Smith Corporate : 01 69 59 11 30 5