DATA SHEET SMV2201-SMV2205 Series: Surface Mount, 0402 Silicon Hyperabrupt Tuning Varactor Diodes Applications • Wide bandwidth, low phase noise VCOs • Wide range voltage-tuned phase shifters and filters Features • High Q, low series resistance • High capacitance ratio at low reverse voltage • Industry-standard 0402 footprints • Packages rated MSL1, 260 °C per JEDEC J-STD-020 Description The SMV2201-SMV2205 series are silicon hyperabrupt junction varactor diodes specifically designed for wide bandwidth, low-loss applications. The specified high capacitance ratio and low reverse voltage make these varactors appropriate for low phase noise Voltage Controlled Oscillators (VCOs) used at frequencies in wireless systems up to and above 2.5 GHz. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 1 DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Table 1. SMV2201-SMV2205 Series Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units 20 mA Forward current IF Reverse voltage VR 22 V Dissipated power @ 25 °C PD 750 mW Storage temperature TSTG –55 +200 °C Junction temperature TJ –55 +175 °C Solder interface temperature TS –40 +85 °C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMV2201-SMV2205 Series Electrical Specifications (Note 1) (TS = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Min Max Min Max Minimum Quality Factor, Q, @ 4.0 V, f = 50 MHz 50 0.73 0.98 0.18 0.33 500 0.45 0.075 22 50 1.18 1.53 0.28 0.43 500 0.45 0.075 22 50 1.63 2.08 0.37 0.54 400 0.45 0.075 SMV2204-040LF 22 50 2.53 3.18 0.53 0.78 400 0.45 0.075 SMV2205-040LF 22 50 4.33 5.38 0.83 1.18 400 0.45 0.075 Minimum VBR @ 10 μA (V) Maximum IR @ 17.6 V (nA) SMV2201-040LF 22 SMV2202-040LF SMV2203-040LF Part # Capacitance CT @ 4.0 V (pF) CT @ 20.0 V (pF) Typical LS (nH) Typical CP (pF) Note 1: Performance is guaranteed only under the conditions listed in this Table. Electrical and Mechanical Specifications The absolute maximum ratings of the SMV2201-SMV2205 series are provided in Table 1. Electrical specifications are provided in Table 2. Table 3 summarizes the capacitance for reverse voltages between 0 and 20 V. Typical performance characteristics of the SMV2201-SMV2205 SERIES are illustrated in Figures 1 and 2. The SPICE model for the SMV2201-SMV2205 varactors is shown in Figure 3 and the associated model parameters are provided in Table 4. varactors in the series are listed in Table 5 and illustrated in Figure 5. Package dimensions for the SMV2201-SMV2205 series are provided in Figure 6. Tape and reel dimensions are provided in Figure 7. Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SMV2201-SMV2205 series is provided in Figure 4. Typical case markings for each of the Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES The SMV2201-SMV2205 series are rated to Moisture Sensitivity Level 1 (MSL1) at 260 °C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 3. Capacitance vs Reverse Voltage VR (V) CT (pF) SMV2201-040LF SMV2202-040LF SMV2203-040LF SMV2204-040LF SMV2205-040LF 0 2.10 3.14 4.71 7.17 12.40 1 1.44 2.20 3.24 4.92 8.49 2 1.15 1.79 2.60 3.95 6.77 3 0.95 1.54 2.20 3.33 5.67 4 0.80 1.34 1.89 2.86 4.84 5 0.67 1.18 1.63 2.46 4.13 6 0.55 1.04 1.39 2.09 3.46 7 0.46 0.90 1.16 1.73 2.84 8 0.40 0.76 0.97 1.43 2.35 9 0.36 0.64 0.84 1.21 2.01 10 0.33 0.55 0.74 1.06 1.77 12 0.29 0.45 0.62 0.88 1.47 14 0.27 0.39 0.55 0.77 1.29 16 0.25 0.36 0.50 0.70 1.17 18 0.24 0.33 0.47 0.65 1.08 20 0.23 0.31 0.44 0.61 1.02 Typical Performance Characteristics (TA = 25 °C, Unless Otherwise Noted) Figure 1. Capacitance vs Reverse Voltage Figure 2. Capacitance vs Reverse Voltage + Contact Potential Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 3 DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Figure 3. SPICE Model Table 4. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) LS (nH) SMV2201-040LF 2.097 2.984 1.199 0.075 5.41 0.45 SMV2202-040LF 3.159 3.944 1.305 0.075 3.00 0.45 SMV2203-040LF 4.716 3.720 1.310 0.075 2.76 0.45 SMV2204-040LF 7.162 4.196 1.439 0.075 2.19 0.45 SMV2205-040LF 12.427 4.077 1.455 0.075 1.21 0.45 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Figure 4. SMV2201-SMV2205 Series PCB Layout Footprint Table 5. SMV2201-SMV2205 Series Typical Case Markings Part Number Part Marking SMV2201-040LF DC1 SMV2202-040LF DD1 SMV2203-040LF DE1 SMV2204-040LF DF1 SMV2205-040LF DH1 Figure 5. SMV2201-SMV2205 Typical Case Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 5 DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Figure 6. SMV2201-SMV2205 Series Package Dimensions Figure 7. SMV2201-SMV2205 Series Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 May 23, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201953A DATA SHEET • SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Ordering Information Model Name SMV2201-040LF Tuning Varactor Diode SMV2202-040LF Tuning Varactor Diode SMV2203-040LF Tuning Varactor Diode SMV2204-040LF Tuning Varactor Diode SMV2205-040LF Tuning Varactor Diode Manufacturing Part Number SMV2201-040LF SMV2202-040LF SMV2203-040LF SMV2204-040LF SMV2205-040LF Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201953A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2012 7