DATA SHEET SKYFR-000748: 2070-2210 MHz Single Junction Robust Lead Isolator Applications • Wireless infrastructure • Power amplifiers Features • BeO free • Small, surface mount package • Operating frequency range: 2070 MHz to 2210 MHz • Parts delivered on tape and reel Description The SKYFR-000748 is a single-junction, surface mount isolator designed for wireless infrastructure applications. It operates over the frequency range of 2070 MHz to 2210 MHz. Intermodulation Distortion (IMD) performance is better than –76 dBc over an operating temperature range of –40 °C to +85 °C. The SKYFR-000748 comes in an industry-standard surface mount package and is designed for automated SMT placement. A block diagram of the SKYFR-000748 is shown in Figure 1. The absolute maximum ratings of the SKYFR-000748 are provided in Table 1. Electrical specifications are provided in Table 2. Plating information is shown in Table 3. Figure 2 shows the package dimensions, and Figure 3 provides the tape and reel dimensions. Figure 1. SKYFR-000748 Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202768B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 7, 2013 1 DATA SHEET • SKYFR-000748 ROBUST LEAD ISOLATOR Table 1. SKYFR-000748 Absolute Maximum Ratings Parameter Maximum Units PF 10 W Peak forward power PF_PK 60 W Average reverse power (maximum duration = 60 sec) PR 5 W Average reverse power (no time limit) PR 4 W Operating temperature TOP –40 +85 °C Storage temperature TST –55 +125 °C Average forward power Note: Symbol Minimum Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Table 2. SKYFR-000748 Electrical Specifications (Note 1) (TOP = –40 °C to +85 °C) Parameter Frequency range Symbol Test Condition f Min Typical 2070 Impedance Max Units 2210 MHz Ω 50 Insertion loss IL Isolation Iso Return loss RL Attenuation 0.50 Port 1 and port 2 dB 20 dB Port 3 16 Port 2 to port 3 18 –76 dB 20 22 dB Intermodulation Distortion (Note 2) IMD 2 x 4 W CW tones, 5 MHz spacing Harmonics 2fo 10 W, CW –5 dB 3fo1 to 5fo1 10 W, CW –7 dB 2fo 10 dB 3fo 10 dB nfo 5 dB 2.8 ns ±0.2 ns Out of band attenuation, port 1 to port 2 Group Delay Within frequency range Deviation from nominal delay over temperature range Measured within frequency 0.5 dBc Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: See Skyworks Application Note, Intermodulation Distortion Measurements of Ferrites, document number 201537 for further details. Table 3. SKYFR-000748 Plating Specification Section Material Plating Leads Bronze Gold Housing Steel Silver Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 dB 18 May 7, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202768B DATA SHEET • SKYFR-000748 ROBUST LEAD ISOLATOR Figure 2. SKYFR-000748 Package Dimensions and PCB Footprint Figure 3. SKYFR-000748 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202768B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 7, 2013 3 DATA SHEET • SKYFR-000748 ROBUST LEAD ISOLATOR Ordering Information Model Name SKYFR-000748 Single Junction Lead Isolator Manufacturing Part Number SKYFR-000748 Evaluation Board Part Number TFX-00025 Copyright © 2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 May 7, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202768B