data sheet SKY65230-11: WLAN 802.11n 2 x 2 MIMO Intera™ FrontEnd Module with 3 Antenna Ports Features l l l l l l l l l l l Description 2 x 2 MIMO architecture T wo full dual-band transmit/receive chains 3rd antenna provides switch diversity on both chains B ackward-compatible with 802.11a/b/g standards P out @ 2.5% EVM: 16 dBm (-11a); 19 dBm (-11b); 19 dBm (-11g) G ain matching: <1.5 dB @ 2 GHz, < 2 dB @ 5 GHz S ingle 3.0–3.6 V power supply, internal voltage regulation T emperature-compensated PA bias networks and directional power detection S eparate digital controls for each PA P ackage size: 10 x 14 x 0.9 mm L ead (Pb)-free and RoHS-compliant MSL-3 @ 250 °C per JEDEC J-STD-020 The SKY65230-11 Intera nFEM combines two complete dual-band transmit/receive chains in one compact RF front end module optimized for 2 x 2 MIMO (multiple in—multiple out) operation, in compliance with the 802.11n draft standard. The SKY65230-11 includes two 5 GHz PAs and two 2 GHz PAs, each with integrated input filtering for 3–4 GHz rejection, and two temperaturecompensated, directional power detectors with 20 dB dynamic range. Also included are low loss, high rejection GaAs diplexers and diversity switches which provide high linearity in all transmit paths and low loss in all receive paths. Additionally, a third antenna port is added to provide switch diversity capability on both chains. All RF ports are matched to 50 W. NEW The SKY65230-11 is packaged in a lead (Pb)-free, RoHS-compliant laminate package, which measures 140 mm2. This tiny footprint enables more functionality in less printed circuit board space. The SKY65230-11 Intera nFEM achieves outstanding gain matching between both 2 GHz transmit paths and both 5 GHz transmit paths, which is a critical requirement for MIMO operation. This is accomplished though mirrored layout symmetry. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Functional Block Diagram RxMain0 RxAux0 R0g R0a Diplexer TxAux0 TxMain0 A0 2 GHz Dir Det T0g Diplexer 5 GHz Dir Det T0a PD0ag PU0g PU0a PU1g PU1a PD1ag CTRL0A2 PA Controller A2 CTRL0A1 Dir Det T1a 5 GHz Diplexer Dir Det T1g A1 TxMain1 TxAux1 2 GHz R1a R1g Diplexer RxMain1 RxAux1 BUY NOW Innovation to GoTM Now available for purchase online. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 1 data sheet • SKY65230-11 Absolute Maximum Ratings ParameterSymbol Condition Min.Typ. Max. Unit V VCC VCC -0.3 5.5 PU0g, PU1g, PU0a, PU1a PU -0.3 5.5 V T0g,T1g,T0a,T1a RFin 10 dBm Operating temperature range TOP 0 85 ºC Tsto Storage temperature range -65 125 ºC Moisture sensitivity level MSL-3 250 °C Thermal resistance qJC 60 °C/W Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. Recommended Operating Conditions ParameterSymbol Condition Min.Typ. Max. Unit Supply Voltage VCC 3 3.3 3.6 V Operating Temperature Top 0 25 85 ºC Max. Unit DC Characteristics Conditions: Vcc = 3.3 V, Top = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W unless otherwise specified. ParameterSymbol Total 802.11g Tx supply current, T0g or T1g Icc-g Total 802.11g Tx quiescent current, T0g or T1g Condition Min.Typ. Pout = 18 dBm, 54 Mbps OFDM, PU0g or PU1g = 3.3 V PU0a or PU1a = 0 V 190 mA Icq-g No RF 95 mA Total 802.11b Tx supply current, T0g or T1g Icc-b Pout = 18 dBm, 11 Mbps CCK PU0g or PU1g = 3.3 V PU0a or PU1a = 0 V 190 mA Total 802.11a Tx supply current, T0a or T1a Icc-a Pout = 15 dBm, 54 Mbps OFDM, PU0g or PU1g = 0 V PU0a or PU1a = 3.3 V 180 mA Total 802.11a Tx quiescent current, T0g or T1g No RF 135 mA Icq-a PA Logic Characteristics Conditions: Vcc = 3.3 V, Top = 25 ºC. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W unless otherwise specified. Min.Typ. Max. Unit Logic high voltage for PU0g, PU1g, PU0a, PU1a (Tx On) ParameterSymbol Condition 2 Vcc V Logic low voltage for PU0g, PU1g, PU0a, PU1a (Tx Off) 0 0.5 V 200 µA Input current logic high voltage for PU0g, PU1g, PU0a, PU1a 100 Input current logic low voltage for PU0g, 0.2 PU1g, PU0a, PU1a 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I µA data sheet • SKY65230-11 PA Bias Control Line Truth Table Control Pin Logic Level = 1 (3 V) Logic Level = 0 (0 V) PU0g g Band PA0 On g Band PA0 Off PU0a a Band PA0 On a Band PA0 Off PU1g g Band PA1 On g Band PA1 Off PU1a a Band PA1 On a Band PA1 Off Switch Control Line Truth Tables H = 3 V, L = 0 V, X = Don’t Care Path RxMain0TxMain0 Ctrl0A2 Ctrl1A2 A0-R0g H L L A0-R0a H L L L X X L X A2-R0g L L X H L H A2-R0a L L L H L H L A0-T0g A0-T0a L H L L X X L H L L X X A2-T0g L L L H H L A2-T0a L L L H H L RxMain1TxMain1 RxAux0TxAux0 Path Ctrl0A2 Ctrl1A2 A1-R1g H L RxAux1TxAux1 L L X X A1-R1a H L L L X X A2-R1g L L H L L H A2-R1a L L H L L H A1-T1g L H L L X X A1-T1a L H L L X X A2-T1g L L L H L H A2-T1a L L L H L H CAUTION: A lthough this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 3 data sheet • SKY65230-11 802.11b,g Transmit Specifications (Tx Chain 0, Tx Chain 1) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Condition F Min.Typ. Max. 2.4 2.5 Unit GHz Linear output power - g Plin_g 54 Mbps OFDM, 64 QAM, EVM = 2.5 % 19 dBm Compliant output power - b Pout_b 11 Mbps CCK 19 dBm Backed off EVM BEVM 54 Mbps OFDM, 64 QAM, POUT = 8 dBm 1.5 % 1 dB compression point P1 dB 25 dBm 25 dB 1 dB Small signal gain Small signal gain variation over frequency band 22.5 lS21l lDS21l 2.5 Gain matching, T0g to A0 vs. T1g to A1 lS21l - M Compared frequency by frequency 1 dB Gain, 3.2–3.3 GHz lS21l - 3.2 -2 dB Harmonics 2f, 3f Pout = 18 dBm, 1 Mbps, CCK, 802.11b -50 -42 dBm/MHz 500 nS Tx switching time t_sw 50 % of Vctl to 90/10 % RF output power level Input return loss lS11l T0g or T1g -10 dB Output return loss lS22l A0 or A1 -8 dB Isolation between T0g and A1 ISO-A1 CW power into T0g and measure ratio of power at A0 to A1 -25 dBc Isolation between T1g and A0 ISO-A0 CW power into T1g and measure ratio of power at A1 to A0 -25 dBc Stability STAB Pout < 18 dBm, load VSWR = 3:1All non-harmonically related outputs less than -50 dBc/1 MHz 802.11b,g Receive Specifications (Rx Chain 0, Rx Chain 1) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Condition F Min.Typ. 2.4 Max. Unit 2.5 GHz Insertion loss lS21l 1.5 Input return loss lS11l R0g or R1g -20 dB Output return loss lS22l A0 or A1 -15 dB Insertion loss delta lDS21l A0 to R0g and A1 to R1g 2.0 0.5 dB dB 802.11b,g Power Detector Specification Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F Power detect range PDR Power detector accuracy PDacc2 DC load impedance A0 or A1 2.4 2.5 GHz 0 20 dBm Over 3:1 VSWR 1 Zload Output voltage, no RF 0.80 kW 0.95 V Output voltage, 20 dBm 0.35 Power detector -3 dB corner frequency 300 4 LPF-3 dB 10 kW load 270 dB 3 400 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I V kHz data sheet • SKY65230-11 802.11b,g Transmit Specifications (Tx Chain 2) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Condition F Min.Typ. Max. 2.4 2.5 Linear output power - g Plin_g Compliant output power - b Backed off EVM 1 dB compression point P1 dB Small signal gain lS21l Small signal gain variation over frequency band GHz 54 Mbps OFDM, 64 QAM, EVM = 2.5 % 18.5 dBm Pout_b 11 Mbps CCK 18.5 dBm BEVM 54 Mbps OFDM, 64 QAM, POUT = 8 dBm 1.5 % 25 dBm 25 dB 22 lDS21l Gain matching, T0g to A0 vs. T1g to A1 lS21l - M Gain, 3.2–3.3 GHz lS21l - 3.2 Harmonics Unit 2f, 3f Compared frequency by frequency Pout = 18 dBm, 1 Mbps, CCK, 802.11b 1 2.5 1 -2 -48 dB dB dB -42 dBm/MHz 500 nS Tx switching time t_sw 50 % of Vctl to 90/10 % RF output power level Input return loss lS11l T0g or T1g -10 Output return loss lS22l A2 -8 dB dB Isolation between T0g and A1 ISO-A1 CW power into T0g and measure ratio of power at A0 to A1 -25 dBc Isolation between T1g and A0 ISO-A0 CW power into T1g and measure ratio of power at A1 to A0 -25 dBc Stability STAB Pout < 18 dBm, load VSWR = 3:1All non-harmonically related outputs less than -50 dBc/1 MHz 802.11b,g Receive Specifications (Rx Chain 2) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Condition F Min.Typ. Max. Unit 2.4 2.5 GHz 2.5 dB Insertion loss lS21l 1.8 Input return loss lS11l R0g or R1g -20 dB Output return loss lS22l A2 -15 dB Insertion loss delta lDS21l A2 to R0g and A2 to R1g 0.5 dB 802.11b,g Power Detector Specification Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F Power detect range PDR Power detector accuracy PDacc2 DC load impedance A0 or A1 2.5 GHz 0 20 dBm Over 3:1 VSWR 1 Zload Output voltage, no RF 2.4 0.80 3 kW 0.95 V Output voltage, 20 dBm 0.35 Power detector -3 dB corner frequency 300 LPF-3 dB 10 kW load 270 dB 400 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 V kHz 5 data sheet • SKY65230-11 802.11a Transmit Specifications (Tx Chain 0, Tx Chain 1) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F 4.9 5.85 GHz Linear output power - a Plin_a 54 Mbps OFDM, 64 QAM, EVM = 2.5 % 16 dBm Backed off EVM BEVM 54 Mbps OFDM, 64 QAM, POUT = 7 dBm 1.5 % 1 dB compression point P1 dB 24 dBm Small signal gain lS21l 24 dB Small signal gain variation over any 20 MHz band 21.5 lDS21l Gain matching, T0g to A0 vs. T1g to A1 lS21l - M Gain, 3.2–3.9 GHz lS21l - 3.9 Harmonics 2f, 3f Compared frequency by frequency Pout = 15 dBm, OFDM542 0.5 2 0 -50 dB dB dB -42 dBm/MHz 500 nS Tx switching time t_sw 50 % of Vctl to 90/10 % RF output power level Input return loss lS11l T0a or T1a -6 Output return loss lS22l A0 or A1 -10 dB dB Isolation between T0g and A1 ISO-A1 CW power into T0a and measure ratio of power at A0 to A1 -25 dBc Isolation between T1g and A0 ISO-A0 CW power into T1a and measure ratio of power at A1 to A0 -25 dBc Stability STAB Pout < 18 dBm, load VSWR = 3:1All non-harmonically related outputs less than -50 dBc/1 MHz 802.11a Receive Specifications (Rx Chain 0, Rx Chain 1) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F 4.9 5.85 GHz Insertion loss lS21l 2.5 3 dB Input return loss lS11l R0g or R1g -20 dB Output return loss lS22l A0 or A1 -15 dB Insertion loss delta lDS21l A0 to R0g and A1 to R1g 0.5 dB 802.11a Power Detector Specification Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Power detect range PDR Power detector accuracy PDacc5 DC load impedance Condition F A0 or A1 Min.Typ. Max. Unit 4.9 5.85 GHz 0 20 dBm Over 3:1 VSWR 0.7 Zload Output voltage, no RF 0.75 kW 0.95 V Output voltage, 18 dBm 0.35 Power detector -3 dB corner frequency 300 6 LPF-3 dB 10 kW load 270 dB 3 400 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I V kHz data sheet • SKY65230-11 802.11a Transmit Specifications (Tx Chain 2) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F 4.9 5.85 GHz Linear output power - a Plin_a 54 Mbps OFDM, 64 QAM, EVM = 2.5 % 15.5 dBm Backed off EVM BEVM 54 Mbps OFDM, 64 QAM, POUT = 7 dBm 1.5 % 1 dB compression point P1 dB 24 dBm Small signal gain lS21l 24 dB Small signal gain variation over any 20 MHz band 21.5 lDS21l Gain matching, T0g to A0 vs. T1g to A1 lS21l - M Gain, 3.2–3.9 GHz lS21l - 3.9 Harmonics 2f, 3f Compared frequency by frequency Pout = 15 dBm, OFDM542 0.5 2 0 -50 dB dB dB -42 dBm/MHz 500 nS Tx switching time t_sw 50 % of Vctl to 90/10 % RF output power level Input return loss lS11l T0a or T1a -6 Output return loss lS22l A2 -10 dB dB Isolation between T0g and A1 ISO-A1 CW power into T0a and measure ratio of power at A0 to A1 -25 dBc Isolation between T1g and A0 ISO-A0 CW power into T1a and measure ratio of power at A1 to A0 -25 dBc Stability STAB Pout < 18 dBm, load VSWR = 3:1All non-harmonically related outputs less than -50 dBc/1 MHz 802.11a Receive Specifications (Rx Chain 2) Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Condition Min.Typ. Max. Unit Frequency range F 4.9 3 5.85 GHz 3.5 dB Insertion loss lS21l Input return loss lS11l R0g or R1g -20 dB Output return loss lS22l A2 -15 dB Insertion loss delta lDS21l A2 to R0g and A2 to R1g 0.5 dB 802.11a Power Detector Specification Conditions: Vcc = 3.3 V, Top = 25 ºC. PA enables and switch control voltages set according to Truth Tables in this document. Measurements made on Skyworks EVB with all losses de-embedded. All unused ports terminated into 50 W. ParameterSymbol Frequency range Power detect range PDR Power detector accuracy PDacc5 DC load impedance Condition F A0 or A1 Max. 4.9 5.85 GHz 0 20 dBm Over 3:1 VSWR 0.7 Zload Output voltage, no RF Min.Typ. 0.75 3 kW V 0.35 Power detector -3 dB corner frequency 300 10 kW load 270 dB 0.95 Output voltage, 18 dBm LPF-3 dB Unit 400 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 V kHz 7 data sheet • SKY65230-11 Typical Performance Data (2.4–2.5 GHz) 0.300 0.275 0.250 0.225 0.200 0.175 0.150 0.125 0.100 0.075 0.050 0.025 0 2.4 3.5 3.0 2.5 2.0 1.5 1.0 0 2 3 4 5 7 6 8 9 10 12 11 13 14 15 16 17 18 19 20 2 3 4 5 7 6 8 9 10 12 11 13 14 15 16 17 18 19 20 POuT (dBm) Output Power (dBm) supply Current vs. Output Power eVM vs. Output Power 2.4 2.5 2.4 2.5 30 0.75 20 Gain (dB) 25 0.65 15 0.55 10 0.45 5 0 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0 4 6 8 10 12 14 16 18 20 22 Output Power (dBm) detector Voltage vs. Output Power Gain vs. Output Power 27 4.5 26 4.0 25 3.5 3.0 2.5 2.0 1.5 24 23 22 1.0 21 0.5 0 2350 2 Output Power (dBm) Gain (dB) Error Vector Magnitude (%) 4.0 0.5 5.0 8 4.5 0.85 0.35 2.5 5.0 0.95 Detector Voltage (V) 2.4 2.5 Error Vector Magnitude (%) Supply Current (A) VCC = 3.3 V, TA = 25 °C, OFDM 54 Mbps, Z0 = 50 W, unless otherwise noted 2400 2450 2500 2550 20 2350 2400 2450 2500 Frequency (GHz) Frequency (GHz) eVM vs. Frequency (POUt = 18 dBm) Gain vs. Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I 2550 data sheet • SKY65230-11 Typical Performance Data (4.9–5.85 GHz) 4.9 5.85 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 2 3 4 5 7 6 8 9 10 12 11 13 14 15 16 17 18 19 20 Output Power (dBm) supply Current vs. Output Power eVM vs. Output Power 4.9 5.3 5.85 0.75 20 0.65 4.9 30 25 10 0.45 5 0 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 5.3 5.85 15 0.55 0 2 4 6 8 10 12 14 16 18 20 22 Output Power (dBm) Output Power (dBm) detector Voltage vs. Output Power Gain vs. Output Power 5.0 30 4.5 29 4.0 28 3.5 27 3.0 2.5 2.0 26 25 24 1.5 23 1.0 22 0.5 21 0 4800 2 3 4 5 7 6 8 9 10 12 11 13 14 15 16 17 18 19 20 Output Power (dBm) Gain (dB) Detector Voltage (V) 5.3 4.5 0.85 0.35 Error Vector Magnitude (%) 4.9 5.85 5.0 0.95 5.3 Error Vector Magnitude (%) 0.300 0.275 0.250 0.225 0.200 0.175 0.150 0.125 0.100 0.075 0.050 0.025 0 Gain (dB) Supply Current (A) VCC = 3.3 V, TA = 25 °C, OFDM 54 Mbps, Z0 = 50 W, unless otherwise noted 5000 5200 5400 5600 5800 6000 20 4800 5000 5200 5400 5600 Frequency (GHz) Frequency (GHz) eVM vs. Frequency @ POUt = 15 dBm Gain vs. Frequency 5800 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 6000 9 data sheet • SKY65230-11 42 41 40 39 RxAux0 TxAux0 PDOag 43 VCC 44 RxMain0 45 GND 46 PUOg 1 Pin Descriptions 47 PUOa GND 48 VCC Module Pin Out R0g TxMain0 38 37 2 GND 3 R0a A0 36 4 GND GND 35 5 T0g Ctrl0A2 34 6 T0a GND 33 7 GND 8 GND GND 31 9 T1a GND 30 10 T1g Ctrl1A2 29 11 GND GND 28 12 R1a A1 27 13 GND GND 26 14 R1g TxMain1 25 GND A2 32 20 21 22 TxAux1 19 RxAux1 18 VCC PD1ag 17 RxMain1 VCC 16 GND PU1a 15 PU1g GND GND Slug (Pin 49) 23 24 Application Circuit VCC VCC C = 4.7 µF 48 C = 4.7 µF 47 46 45 44 43 42 40 39 1 38 2 37 3 36 4 35 5 34 6 33 7 32 8 31 9 30 10 29 11 28 12 27 13 26 14 25 15 16 17 18 19 20 21 C = 4.7 µF 22 23 C = 4.7 µF VCC 10 41 24 Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 NameDescription R0g Receiver output GND Ground R0a Receiver output GND Ground T0g Transmitter input T0a Transmitter input GND Ground GND Ground T1a Transmitter input T1g Transmitter input GND Ground R1a Receiver output GND Ground R1g Receiver output GND Ground PU1g Power amp enable input PU1a Power amp enable input VCC 3.3 V PD1ag Power detector 1 output GND Ground VCC 3.3 V RxMain1 Diversity switch control input RxAux1 Diversity switch control input TxAux1 Diversity switch control input TxMain1 Diversity switch control input GND Ground A1 Antenna 1 GND Ground Ctrl1A2 TR switch control input GND Ground GND Ground A2 Antenna 2 GND Ground Ctrl0A2 TR switch control input GND Ground A0 Antenna 0 GND Ground TxMain0 Diversity switch control input TxAux0 Diversity switch control input RxAux0 Diversity switch control input RxMain0 Diversity switch control input VCC 3.3 V GND Ground PD0ag Power detector 0 output PU0g Power amp enable input PU0a Power amp enable input VCC 3.3 V GND Ground GND Ground VCC Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I data sheet • SKY65230-11 Recommended Footprint Solder Mask 10.34 mm Pin 47 0.425 mm 10.44 mm 24X 0.5 mm 24X 0.75 mm Pin 48 0.20 X 45 0.425 mm 48X 0.6 mm 48X 0.85 mm Pin 1 Pin 1 0.175 mm Typ. 0.85 mm Typ. 0.35 mm CL 0.85 mm Typ. 6X 2.1 mm 6X 5 mm 6X 0.725 mm 1.4 mm CL 1.4 mm 0.7 mm 14.44 mm 0.425 mm 14.34 mm 2.2 mm Typ. 0.25 mm Typ. CL 2X 1.525 mm 0.7 mm Thermal Via Array 0.3 mm on 0.7 mm Pitch 0.35mm Additional Vias in Common Ground Pad Will Improve Thermal Performance 2X 1.875 mm CL 2 mm Typ. Package Outline 8X 2.3 mm 2X 4.075 mm Thermal vias should be tented and filled with solder mask 30–35 µm copper plating recommended. Stencil Pattern 0.20 X 45 mm 10.34 mm 48X 0.5 mm 0.425 mm 48X 0.75 mm 0.85 mm Typ. 6X 5 mm 0.425 mm CL 14.34 mm 6X 2.1 mm Stencil Aperture Size of 80–100% of the Module/Pkg. Solder Mask Openings Package Outline 8X 2.3 mm CL 2X 2.975 mm Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 11 data sheet • SKY65230-11 Package Outline Pin 1 Indicator 14 ± 0.1 Skyworks SKY65230-11 Lot # YYWWCC 10 ± 0.1 0.9 ± 0.1 Side View Pin 48 0 28x 4.92 4x 3.825 4x 2.125 Top View Pin 1 Indicator 48x SMT Pad Pin 1 See Detail B See Detail C See Detail D 4x 0.425 6x 5 A 6x 2.1 0 4x 1.275 4x 2.975 4x 4.675 4x 2.125 4x 3.825 4x 5.525 15x Solder Mask Openings 4x 0.424 6x 2.975 8x 2.3 4x 1.275 20x 6.92 Bottom View 0.5 ± 0.075 (0.1) Metal Pad Edge 0.5 ± 0.03 2 ± 0.03 Detail A Pad Scale: 2X 14X Rotated 180° 10X Rotated 90° CW 10X Rotated 90° CCW 3.05 ± 0.03 Detail C Scale: Full 12 Detail B Scale: Full 12X 2.2 ± 0.03 R 0.05 Max. 1.45 ± 0.03 R 0.05 Max. 2.2 ± 0.03 R 0.05 Max. 1.45 ± 0.03 Detail D Scale: Full 2X Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 3, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200547 Rev. I data sheet • SKY65230-11 Copyright © 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and Intera are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200547 Rev. I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 3, 2008 13