Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Applications
Product Description



The SE5501L is a complete 802.11n WLAN RF frontend module providing all the functionality of the power
amplifiers, LNAs, power detector, Antenna switches,
filtering and associated matching. The SE5501L
provides a complete 2.4 GHz and 5 GHz WLAN RF
solution from the output of the transceiver to the
antennas in a compact form factor.
IEEE802.11b DSSS WLAN
IEEE802.11a,g,n OFDM WLAN
Embedded applications with Bluetooth (Mobile)
Features








Direct to Battery operation
All RF ports matched to 50 Ω
Integrated 2.4/5 GHz PA, 2.4/5 GHz LNA, T/R
switches and filtering
Integrated Power Detector
20 dBm @ 3 % EVM, 802.11gn, 54 Mbps
18 dBm @ 3.0 % EVM, 802.11an, 54 Mbps
Lead free, Halogen Free and RoHS compliant
Compact package, 3 x 5 x 0.9 mm, MSL 3
Ordering Information
Part No.
Package
Remark
SE5501L
SE5501L-R
SE5501L-EK1
30 pin QFN
30 pin QFN
N/A
Samples
Tape & Reel
Evaluation kit
The receive path is designed to maximize
performance by providing both a low noise amplifier
as well as a bypass state, for use when high power
signals are being received.
Designed for ease of use, all RF ports are matched to
50 Ω to simplify PCB layout and the interface to the
transceiver RFIC. The SE5501L also includes a
transmitter power detector for each band with 20 dB
of dynamic range.
The SE5501L is optimized for mobile applications with
direct to battery operation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
1
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Functional Block Diagram
LEN2
RX2
RX5
PEN2
2.4 GHz LNA
TX2
2.4 GHz PA
BTRX
5 GHz LNA
pwr
det
DET
BTALL
CBT
CRX
ANT2
TX5
5 GHz PA
LEN5
ANT5
PEN5
Figure 1: Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
2
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Pin Out Diagram
RX2
GND
RX5
VCC
CREF
PEN2
DNC
LEN2
CRX
GND
TX2
GND
SP5
BTRX
VCC
BTALL
DET
GND
TX5
ANT2
GND
ANT5
GND
GND
CBT
PEN5
LEN5
VCC
VCC
SP2
Figure 2: SE5501L Pin Out (Top View Through Package)
Pin Out Description
Pin No.
Name
Description
Pin No.
Name
Description
1
RX2
2.4 GHz RX output
14
DET
Power Detector Output
2
GND
Ground
15
TX5
5 GHz Transmit Port
3
RX5
5 GHz RX output
16
SP2
2.4 GHz bias speedup
4
VCC
Supply Voltage
17
VCC
Supply Voltage
5
CREF
18
VCC
6
PEN2
19
LEN5
7
DNC
20
PEN5
8
LEN2
21
CBT
Supply Voltage
Enable for 5 GHz LNA and
RX Switch
Enable for 5 GHz PA and TX
Switch
Switch control for BT
9
CRX
22
GND
Ground
10
GND
Logic Reference Voltage
Enable for 2.4 GHz PA and
TX Switch
Do Not Connect
Enable for 2.4 GHz LNA and
RX Switch
Switch control for RX
Switches
Ground
23
GND
Ground
24
ANT5
5 GHz Antenna Port
25
GND
Ground
26
ANT2
2.4 Ghz Antenna Port
11
TX2
2.4 GHz Transmit Port
12
SP5
5 GHz bias speedup
13
VCC
Supply Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
3
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Pin No.
Name
27
GND
28
BTALL
Description
Pin No.
Name
Description
Ground
29
BTRX
BT RX Port
BT Port
30
GND
Ground
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol
Definition
Min.
Max.
Unit
VCC
Supply Voltage
-0.3
5.5
V
VIN
Control Pin Voltages
-0.3
3.6
V
-
+10
dBm
Operating Temperature Range
-40
85
°C
Storage Temperature Range
-40
125
°C
1000
V
TXRFIN
TA
TSTG
ESD HBM
TX2/TX5, with ANT2/ANT5 terminated in 50Ω
JEDEC JESD22-A114
All pins
Recommended Operating Conditions
Symbol
Parameter
Min.
Typ.
Max.
Unit
VCC
Supply Voltage
3.0
3.3
4.8
V
TA
Ambient Temperature
-40
25
85
°C
Control Logic Characteristics
Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
4
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Parameter
max
Units
1.7
3.6
V
Logic input high : VIH
VREF-0.3
3.6
V
Logic input low : VIL
0
0.3
V
Logic high reference : VREF
min
nom
Logic input current : IIH
0.5
5
µA
Logic input current : IIL
0.1
1
µA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected]m • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
5
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
DC Electrical Characteristics
Conditions: VCC = 3.3 V,, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol
Parameter
Conditions
Min.
Typ.
Max.
180
190
160
170
100
-
190
200
170
180
-
120
-
Total 802.11g Transmit Supply
Current
POUT = 20 dBm, 54 Mbps OFDM
signal, 64QAM, PEN2 = Hi,
POUT = 18 dBm, 54 Mbps OFDM
signal, 64QAM, PEN2 = Hi,
TXICQ-G
Quiescent current , 802.11g
Transmit supply Current
No RF applied, PEN2=Hi
-
TXICC-A
Total 802.11a Transmit Supply
Current
POUT = 18 dBm, 54 Mbps OFDM
signal, 64QAM, PEN5= Hi
POUT = 16 dBm, 54 Mbps OFDM
signal, 64QAM, PEN5= Hi
-
TXICC-G
Unit
-
mA
mA
mA
TXICQ-A
Quiescent current , 802.11a
Transmit supply Current
No RF applied, PEN5- Hi
RXICC-G
Total 802.11b/g Receive Supply
Current
LEN= Hi
LEN = Lo
-
15
0.2
mA
RXICC-A
Total 802.11a Receive Supply
Current
LEN= Hi
LEN = Lo
-
15
0.2
mA
Total BT Supply Current
CBT = Hi
-
0.2
mA
Total Supply Current
No RF,
PEN2=PEN5=LEN2=LEN5=0V
-
10
μA
ICC-BT
ICC_OFF
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
mA
6
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Operating Modes
Mode#
Mode Description
PEN2
LEN2
PEN5
LEN5
CRX
CBT
CREF
0
All Off
0
0
0
0
0
0
X
1
BT
0
0
0
0
0
1
1
2
BT + RX5 Low Gain
0
0
0
0
1
1
1
3
BT + RX5 High Gain
0
0
0
1
1
1
1
4
BT + TX5
0
0
1
0
0
1
1
5
RX2 Low Gain + RX5 Low Gain
0
0
0
0
1
0
1
6
RX2 High Gain + RX5 Low Gain
0
1
0
0
1
0
1
7
RX2 Low Gain + RX5 High Gain
0
0
0
1
1
0
1
8
TX2
1
0
0
0
0
0
1
9
TX5
0
0
1
0
0
0
1
10
RX2 High Gain + RX5 High Gain
0
1
0
1
1
0
1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
7
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
AC Electrical Characteristics
2.4 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, PEN2= CREF=Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1
evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol
FIN
Parameter
Frequency Range
Condition
Min.
Typ.
-
2400
-
2485
MHz
2.5
2.0
3.5
2.5
%
22
25
dB
-10
-10
dBc
EVM
EVM
Pout = 19.5 dBm
Pout = 18 dBm
S21
Gain
2400 – 2485 MHz
Out of Band Gain
1600 – 1660 MHz
3200 – 3215 MHz
Gain Variation
Over 2400-2485 MHz
Band
S21_OOB
∆S21
19
1.5
Max.
Unit
2
dBpp
S11
Input Return Loss
-14
-10
dB
S22
Output Return Loss
-10
-6
dB
PN
Wideband Noise
NF
Noise Figure
2f
800 – 2170 MHz
-140
dBm/Hz
10
2f @ Pout= 22 dBm
-25
-20
3f
3f @ Pout = 22 dBm
-35
-30
ACP11b
11b @ Pout=22 dBm:
fc +/- 11 MHz
fc +/- 22 MHz
-34
-54
-32
-52
ACP11g
11g @ Pout=20 dBm:
fc +/- 11 MHz
fc +/- 20 MHz
fc +/- 30 MHz
-23
-30
-43
-20
-28
-40
11b Harmonics
Spectral Mask
STAB
dBm/MHz
11n @ Pout=18 dBm:
fc +/- 11 MHz
fc +/- 20 MHz
fc +/- 30 MHz
ACP11n
Stability
dB
POUT ≤ 20dBm
Load VSWR = 10:1
dBc
dBc
dBc
-23
-30
-48
-20
-28
-45
All non-harmonically related outputs less than
-45 dBm/MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
8
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
2.4 GHz Receive Characteristics
Conditions: VCC = 3.3V, LEN2=CRX=CREF = Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1
evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol
Parameter
FOUT
Frequency Range
S21
Gain
Condition
Min.
Typ.
-
2400
-
2485
13
15
17
LEN2 = Hi
Max.
Unit
MHz
dB
LEN2 = Lo
-8
Out of Band Gain
800 – 1990 MHz
7
Gain Variation
2400 – 2485 MHz, Over
any 20MHz band
-
0.25
0.4
dB
NF
Noise Figure
LEN2 = Hi
-
2.0
2.5
dB
IIP3
Input Third
Intercept
LEN2 = Hi
0
2
-
dBm
-25
-
-
dB
-10
-8
-
dBm
-
-12
-10
dB
-8
-7
-
S21_OOB
ΔS21
ISOLRRX
Order
Reverse Isolation
INT
Interferer
S11
Input Return Loss
1710-1990, max gain
change 0.5 dB
LEN2 = Hi
IP1dB
Input P1dB
dBm
LEN2 = Lo
TEN
dB
Enable Time
10% to 90% of RX RF
power, from time that
LEN2 is at 50%
+5
+10
-
-
-
800
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
nsec
9
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
5 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, PEN5=CREF= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1
evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol
FIN
Parameter
Frequency Range
EVM
EVM
S21
Gain
S21_OOB
∆S21
Condition
Min.
Typ.
-
5150
-
5850
MHz
2.5
2.0
3.5
2.5
%
18
21
dB
-15
-8
-15
dBc
2.0
3.0
dBpp
Pout = 18 dBm
Pout = 17 dBm
15
Out of Band Gain
3265 – 3900 MHz
6900 – 7250 MHz
7250 – 7800 MHz
Gain Variation
Over 5150-5850 MHz
Band
Max.
Unit
S11
Input Return Loss
-10
-8
dB
S22
Output Return Loss
-10
-6
dB
PN
Wideband Noise
NF
Noise Figure
2f
800 – 2170 MHz
-150
dBm/Hz
10
2f @ Pout= 18 dBm
-40
-35
3f
3f @ Pout = 18 dBm
-50
-45
ACP11a
11a @ Pout=18 dBm:
fc +/- 11 MHz
fc +/- 20 MHz
fc +/- 30 MHz
-23
-30
-43
-20
-28
-40
11n @ Pout=16 dBm:
fc +/- 11 MHz
fc +/- 20 MHz
fc +/- 30 MHz
-23
-30
-48
-20
-28
-45
Harmonics
dB
dBm/MHz
dBc
Spectral Mask
ACP11n
Stability
POUT ≤ 18dBm
Load VSWR = 10:1
dBc
All non-harmonically related outputs less than
-45 dBm/MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
10
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
5 GHz Receive Characteristics
Conditions: VCC = 3.3 V, LEN5=CREF=CRX= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1
evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol
Parameter
FOUT
Frequency Range
S21
Gain
Condition
Min.
Typ.
Max.
Unit
-
5150
-
5850
MHz
LEN5 = Hi
8
11
14
dB
LEN5 = Lo
-19
-14
-9
dB
Out of Band Gain
800 – 1990 MHz
-
-
-10
dB
Gain Variation
5150 – 5850 MHz, Over
any 40MHz band
-
0.25
0.4
dB
NF
Noise Figure
LEN5=Hi
-
2.5
3
dB
IIP3
Input Third
Intercept
LEN5= Hi
3
5
-
dBm
20
-
-
dB
-10
-
-
dBm
-
-6
LEN5 = Hi
-7
-5
-
LEN5 = Lo
+5
+10
-
-
-
800
S21_OOB
ΔS21
ISOLRRX
Order
Reverse Isolation
INT
Interferer
S11
Input Return Loss
IP1dB
TEN
1710 - 2500 MHz, max
gain change = 0.5 dB
-
dB
Input P1dB
Enable Time
dBm
10% to 90% of RX RF
power, from time that
LEN5 is at 50%
nsec
Bluetooth Characteristics
Conditions: VCC = 3.3 V, CBT=CREF= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1
evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise
noted.
Symbol
FOUT
Parameter
Frequency Range
Condition
Min.
Typ.
Max.
-
2400
-
2485
ANT2 to BTALL (CBT= Hi)
-
1.0
2.0
Unit
MHz
BTIL
Insertion Loss
S11
BT Port Return Loss
CBT= Hi
-
-14
-10
dB
Switch Isolation
CBT= Hi
20
-
-
dB
10% to 90% of BT RF
power, from time that CBT
is at 50%
-
-
800
nsec
ISOLSW
TEN
Enable Time
dB
0.8
BTALL to BTRX
( LEN2=Hi)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
11
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Power Detector Characteristics
Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5501L-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
PEN2= Hi
PEN5 = Hi
2400
5150
-
2500
5850
MHz
0
-
22
dBm
FOUT
Frequency Range
PDR
Power detect range,
peak power
PDZLOAD
DC load impedance
-
-
2.5
PDVP20
Output Voltage, POUT =
20 dBm
-
-
0.8
1.3
V
PDVpnoRF
Output Voltage, POUT =
No RF
-
-
0.130
-
V
+1.5
dB
PDVAR
Power Detector
Accuracy
PDBW
Power Detector Output
Bandwidth
Measured at ANT
Pout>10 dBm
-1.5
kΩ
350
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
KHz
12
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Package Diagram
30
29
28
27
26
26
27
28
29
30
1
25
25
1
2
24
24
2
3
23
23
3
4
22
22
4
5
21
21
5
6
20
20
6
7
19
19
7
8
18
18
8
9
17
17
9
10
16
16
10
11
12
13
14
15
15
14
13
12
11
TOP VIEW
BOTTOM VIEW
Figure 4: Package Outline Drawing
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
13
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Recommended PCB Footprint
30
29
28
27
30
26
29
28
27
26
30
29
28
27
26
1
25
1
25
1
25
2
24
2
24
2
24
3
23
3
23
3
23
4
22
4
22
4
22
5
21
5
21
5
21
6
20
6
20
6
20
7
19
7
19
7
19
8
18
8
18
8
18
9
17
9
17
9
17
10
16
10
16
10
16
11
12
13
14
15
11
12
13
14
15
11
12
13
14
15
Figure 5: Recommended PCB footprint
Package Handling Information
Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed
regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly. The SE5501L is capable of
withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or
in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that
the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For
details on both attachment techniques, precautions, and handling procedures recommended, please refer to:
 “Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045.
 “Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
14
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Branding Information
Pin 1 Identifier
Terminal Finish
Pin 1
e3
Part Number
Lot Code
SiGe
SE5501L
Lot Code
Figure 6: SE5501L Branding Information
Document Change History
Revision
Date
Notes
1.0
06/17/09
Created
1.1
07/14/2009
Updated pin-out
1.2
12/11/2009
Updated Package Outline and specifications
1.3
January-14-2011
Updated specifications
1.4
February-24-2011
Updated specifications
1.5
April-12-2011
Updated specifications
1.6
June-08-2011
Updated specifications
1.7
July-07-2011
Updated MSL rating
1.8
August-21-2011
Updated specifications
1.9
April-11-2012
Updated with Skyworks logo and disclaimer statement
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
15
DATA SHEET
SE5501L: Dual-Band 802.11n WLAN/BT Front-End
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein,
are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or
omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time,
without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other
difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials,
products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in
Skyworks Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE,
INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL
SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR
OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT,
INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE
MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to
personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to
fully indemnify Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or
operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks.
Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated
published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries.
Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions,
posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202405A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
16