Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
PD4W09-59LF: 0.81-0.96 GHz Four-Way 0° Power
Splitter/Combiner
Applications
• Cellular radios
• Transmitters/receivers
Features
• Low loss
• High isolation
• Good I/O match
• Excellent phase/amplitude balance
• MSOP-8 (8-pin, 3 x 3 mm) package (MSL1, 260 °C per JEDEC
J-STD-020)
Figure 1. PD4W09-59LF Block Diagram
Description
The PD4W09-59LF is a monolithic, four-way in-phase hybrid
junction tuned for the 0.81 GHz to 0.96 GHz band. The device
offers low loss, high isolation, good input/output matching and
exceptional phase/amplitude balance.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Figure 2. PD4W09-59LF Pinout – 8-Pin MSOP-8
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200245C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2011
1
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Table 1. PD4W09-59LF Signal Descriptions
Pin #
Name
Description
Pin #
Name
Description
1
PORT_1
RF port 1
5
PORT_3
RF port 3
2
IN/SUM
Common input or summing RF port
6
GND
Ground
3
GND
Ground
7
GND
Ground
4
PORT_4
RF port 4
8
PORT_2
RF port 2
Table 2. PD4W09-59LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Input power, CW
Minimum
PIN
Maximum
Units
1.500 (Note 2)
W
0.375 (Note 3)
W
Storage temperature
TSTG
–65
+150
°C
Operating temperature
TOP
–40
+85
°C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Note 2: When used as a power divider with a 2.0:1 maximum VSWR on all ports.
Note 3: When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. PD4W09-59LF Series Electrical Specifications (Note 1)
(TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
0.81
Max
Units
0.96
GHz
1.5
dB
Frequency range
f
Insertion loss less6 dB split
IL
Isolation
Iso
Input VSWR
VSWR
IN/SUM port
1.2:1
1.5:1
–
Output VSWR
VSWR
PORT_1, PORT_2,
PORT_3, PORT_4
1.2:1
1.5:1
–
±0.4
±0.6
dB
±6
±8
deg
1.3
20
Amplitude balance
Phase balance
23
dB
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Electrical and Mechanical Specifications
Package Dimensions
The absolute maximum ratings of the PD4W09-59LF are provided
in Table 2. Electrical specifications are provided in Table 3.
The PCB layout footprint for the PD4W09-59LF is provided in
Figure 9. Package dimensions for the 8-pin MSOP-8 are shown in
Figure 10, and tape and reel dimensions are provided in
Figure 11.
Typical performance characteristics are shown in Figures 3
through 8.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
May 23, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200245C
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
The PD4W09-59LF is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 °C. It can be used for lead or lead-free soldering. For
Typical Performance Characteristics
(TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Figure 3. Insertion Loss vs Frequency
Figure 4. Output VSWR vs Frequency
Figure 5. Isolation vs Frequency
Figure 6. Amplitude Balance vs Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200245C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2011
3
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Figure 7. Input VSWR vs Frequency
Figure 8. Phase Balance vs Frequency
Evaluation Board Description
Package and Handling Information
The PD4W09-59LF Evaluation Board is used to test the
performance of the PD4W09-59LF power splitter/combiner. An
assembly drawing for the Evaluation Board is shown in Figure 9.
The Evaluation Board layer detail is shown in Figure 10.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Package Dimensions
The PCB layout footprint for the PD4W09-59LF is shown in
Figure 11. Typical case markings are shown in Figure 12.
Package dimensions for the 8-pin MSOP-8 are shown in
Figure 13, and tape and reel dimensions are provided in
Figure 14.
The PD4W09-59LF is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
May 23, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200245C
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Figure 9. PD4W09-59LF Evaluation Board Assembly Drawing
Figure 10. PD4W09-59LF Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200245C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2011
5
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Figure 11. PD4W09-59LF PCB Layout Footprint
Figure 12. Typical Part Markings
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected].com • www.skyworksinc.com
6
May 23, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200245C
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Figure 13. PD4W09-59LF 8-Pin MSOP-8 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200245C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2011
7
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Figure 14. MSOP-8 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
May 23, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200245C
DATA SHEET • PD4W09-59LF POWER SPLITTER/COMBINER
Ordering Information
Model Name
PD4W09-59LF Power Splitter/Combiner
Manufacturing Part Number
PD4W09-59LF
Evaluation Board Part Number
PD4W09-59LF-EVB
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200245C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 23, 2011
9