Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SKY18120-11: 0.4-2.7 GHz SP9T Antenna Switch Module
With GSM Transmit Filters
Applications
• Dual-mode, multi-band handsets and data cards (GSM/EDGE,
Quad/UMTS or LTE dual mode)
• Low-cost, ultra-small footprint embedded modules
Features
• Supports quad-band GSM, tri-band UMTS, LTE, or TD-SCDMA
• Low insertion loss:
− 1.1 dB @ 1 GHz GSM transmit
− 0.8 dB @ 1 GHz GSM receive
− 1.1 dB @ 2 GHz GSM receive
− 0.7 dB @ 2 GHz UMTS transmit
• Good 2nd/3rd harmonic performance:
− –52/–52 dBm @ PIN = +35 dBm (2G low-band transmit)
− –67/–60 dBm @ PIN = +32 dBm (2G high-band transmit)
• State-of-the-art SOI process with GPIO logic
• Ultra-small MCM (16-pin, 2.5 x 2.5 mm) package (MSL3,
260 °C per JEDEC J-STD-020)
Figure 1. SKY18120-11 Block Diagram
Description
The SKY18120-11 is a Single Pole, Nine-Throw (SP9T) antenna
switch Front-End Module (FEM) designed for dual-mode, high
power band switching applications that require low harmonics and
low insertion loss. The device is optimized for GSM/EDGE,
TD-SCDMA, and WCDMA/LTE applications.
The SKY18120-11 consists of an SP9T switch, GSM transmit
signal low-pass harmonic filters, and a GPIO controller. The low
current consumption makes this device very suitable for battery
operated applications.
The SKY18120-11 is manufactured in a compact, 2.5 x 2.5 mm,
16-pin Multi-Chip Module (MCM) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
1
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Figure 2. SKY18120-11 Pinout – 16-Pin MCM
(Top View)
Table 1. SKY18120-11 Signal Descriptions
Pin #
Name
Description
Pin #
Name
Description
1
VDD
Supply voltage
9
ANT
Antenna
2
VC4
Antenna switch control logic pin
10
GND
Ground
3
VC3
Antenna switch control logic pin
11
DCS1800/PCS1900_TX
RF input for DCS1800/PCS1900
transmit
4
VC2
Antenna switch control logic pin
12
GSM850/EGSM900_TX
RF input for GSM850/EGSM900
transmit
5
VC1
Antenna switch control logic pin
13
RX1
RF output for GSM receive
6
UMTS1_TD1
RF input/output for UMTS transmit/receive
14
RX2
RF output for GSM receive
7
UMTS2_TD2
RF input/output for UMTS transmit/receive
15
RX3
RF output for GSM receive
8
UMTS3_TD3
RF input/output for UMTS transmit/receive
16
RX4
RF output for GSM receive
Note:
Bottom ground paddles must be connected to ground.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 2. SKY18120-11 Absolute Maximum Ratings (Note 1)
Parameter
Minimum
Maximum
Units
VDD
2.65
3.30
V
Control voltage
VCTRL
1.55
3.30
V
RF input power:
GSM850/EGSM900 transmit
DCS1800/PCS1900 transmit
UMTS transmit
All receive ports
PIN
+36 (Note 2)
+33 (Note 2)
+30
+13
dBm
dBm
dBm
dBm
Operating temperature
TOP
–35
+85
°C
Storage temperature
TSTG
–60
+150
°C
Supply voltage
Symbol
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Note 2: 12.5% to 50% duty cycle.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Functional Description
Electrical and Mechanical Specifications
The SKY18120-11 SP9T Antenna Switch Module can operate in
one of nine states when the VDD signal is high. These states are
controlled by the VC1 to VC4 pin signals.
The absolute maximum ratings of the SKY18120-11 are provided
in Table 2. Electrical specifications are provided in Table 3.
The state of the SKY18120-11 is determined by the logic shown in
Table 4.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
3
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 3. SKY18120-11 General Electrical Specifications (Note 1) (1 of 4)
(VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
(Note 2)
Min
Typical
Max
Units
Insertion Loss
GSM850/EGSM900_TX pin to ANT pin
IL
824 to 915 MHz (NTC)
824 to 915 MHz (ETC)
1.12
1.21
1.30
1.50
dB
dB
DCS1800/PCS1900_TX pin to ANT pin
IL
1710 to 1910 MHz (NTC),
1710 to 1910 MHz (ETC)
1.12
1.23
1.40
1.60
dB
dB
ANT pin to RX1 to RX4 pins
IL
869 to 960 MHz (NTC),
869 to 960 MHz (ETC)
0.79
0.88
1.20
1.40
dB
dB
1805 to 1990 MHz (NTC),
1805 to 1990 MHz (ETC)
1.08
1.19
1.40
1.60
dB
dB
700 to 960 MHz (NTC),
700 to 960 MHz (ETC)
0.48
0.55
1.00
1.20
dB
dB
1710 to 1920 MHz (NTC),
1710 to 1920 MHz (ETC)
0.72
0.81
1.20
1.40
dB
dB
2010 to 2700 MHz (NTC)
2010 to 2700 MHz (ETC)
0.80
0.90
1.30
1.50
dB
dB
UMTS_TD1/TD2/TD3 pins to ANT pin
IL
Harmonic Attenuation
GSM850/EGSM900_TX pin to ANT pin,
2nd harmonics
2fo
1648 to 1698 MHz,
1760 to 1830 MHz
25
25
37
31
dB
dB
GSM850/EGSM900_TX pin to ANT pin,
3rd harmonics
3fo
2472 to 2547 MHz,
2640 to 2745 MHz
25
25
28
31
dB
dB
DCS1800/PCS1900_TX pin to ANT pin,
2nd harmonics
2fo
3420 to 3820 MHz
25
33
dB
DCS1800/PCS1900_TX pin to ANT pin,
3rd harmonics
3fo
5130 to 5730 MHz
25
28
dB
GSM850/EGSM900_TX pin to RX1 pin
GSM850/EGSM900_TX pin to RX2 pin
GSM850/EGSM900_TX pin to RX3 pin
GSM850/EGSM900_TX pin to RX4 pin
Iso
824 to 915 MHz
25.0
25.0
30.0
30.0
30.4
36.7
42.8
44.5
dB
dB
dB
dB
GSM850/EGSM900_TX pin to ANT pin
Iso
GSM receive mode,
824 to 915 MHz
20.0
26.4
dB
DCS1800/PCS1900_TX pin to RX1 pin
DCS1800/PCS1900_TX pin to RX2 pin
DCS1800/PCS1900_TX pin to RX3 pin
DCS1800/PCS1900_TX pin to RX4 pin
Iso
1710 to 1910 MHz
25.0
25.0
30.0
30.0
31.8
36.4
35.9
40.2
dB
dB
dB
dB
Isolation
DCS1800/PCS1900_TX pin to ANT pin
GSM receive mode
20.0
24.3
dB
UMTS1_TD1 pins to RX1 pin
UMTS1_TD1 pins to RX2 pin
UMTS1_TD1 pins to RX3 pin
UMTS1_TD1 pins to RX4 pin
Iso
700 to 960 MHz,
UMTS1_TD1 mode
30.0
30.0
30.0
30.0
51.0
56.0
57.2
52.7
dB
dB
dB
dB
UMTS1_TD1 pins to RX1 pin
UMTS1_TD1 pins to RX2 pin
UMTS1_TD1 pins to RX3 pin
UMTS1_TD1 pins to RX4 pin
Iso
1710 to 2170 MHz,
UMTS1_TD1 mode
25.0
25.0
30.0
30.0
41.7
42.2
44.5
41.1
dB
dB
dB
dB
UMTS1_TD1 pins to RX1 pin
UMTS1_TD1 pins to RX2 pin
UMTS1_TD1 pins to RX3 pin
UMTS1_TD1 pins to RX4 pin
Iso
2170 to 2700 MHz,
UMTS1_TD1 mode
30
30
30
30
40
40
40
40
dB
dB
dB
dB
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 3. SKY18120-11 General Electrical Specifications (Note 1) (2 of 4)
(VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
(Note 2)
Min
Typical
Max
Units
Isolation (continued)
UMTS2_TD2 pins to RX1 pin
UMTS2_TD2 pins to RX2 pin
UMTS2_TD2 pins to RX3 pin
UMTS2_TD2 pins to RX4 pin
Iso
700 to 960 MHz,
UMTS2_TD2 mode
30.0
30.0
30.0
30.0
51.9
56.2
58.1
55.2
dB
dB
dB
dB
UMTS2_TD2 pins to RX1 pin
UMTS2_TD2 pins to RX2 pin
UMTS2_TD2 pins to RX3 pin
UMTS2_TD2pins to RX4 pin
Iso
1710 to 2170 MHz,
UMTS2_TD2 mode
25.0
25.0
30.0
30.0
41.6
43.6
46.3
44.6
dB
dB
dB
dB
UMTS2_TD2 pins to RX1 pin
UMTS2_TD2 pins to RX2 pin
UMTS2_TD2 pins to RX3 pin
UMTS2_TD2pins to RX4 pin
Iso
2170 to 2700 MHz,
UMTS2_TD2 mode
30
30
30
30
40
40
40
40
dB
dB
dB
dB
UMTS3_TD3 pins to RX1 pin
UMTS3_TD3 pins to RX2 pin
UMTS3_TD3 pins to RX3 pin
UMTS3_TD3pins to RX4 pin
Iso
700 to 960 MHz,
UMTS3_TD3 mode
30.0
30.0
30.0
30.0
54.2
56.6
58.0
56.8
dB
dB
dB
dB
UMTS3_TD3 pins to RX1 pin
UMTS3_TD3 pins to RX2 pin
UMTS3_TD3 pins to RX3 pin
UMTS3_TD3pins to RX4 pin
Iso
1710 to 2170 MHz,
UMTS3_TD3 mode
25.0
25.0
30.0
30.0
41.4
43.9
47.3
46.4
dB
dB
dB
dB
UMTS3_TD3 pins to RX1 pin
UMTS3_TD3 pins to RX2 pin
UMTS3_TD3 pins to RX3 pin
UMTS3_TD3pins to RX4 pin
Iso
2170 to 2700 MHz,
UMTS3_TD3 mode
30
30
30
30
37
37
37
37
dB
dB
dB
dB
UMTS1_TD1 pin to UMTS2_TD2 pin
UMTS1_TD1 pin to UMTS3_TD3 pin
Iso
700 to 960 MHz,
UMTS1_TD1 mode
25.0
25.0
31.1
40.2
dB
dB
UMTS1_TD1 pin to UMTS2_TD2 pin
UMTS1_TD1 pin to UMTS3_TD3 pin
Iso
1710 to 2170 MHz,
UMTS1_TD1 mode
15.0
15.0
22.3
28.6
dB
dB
UMTS1_TD1 pin to UMTS2_TD2 pin
UMTS1_TD1 pin to UMTS3_TD3 pin
Iso
2170 to 2700 MHz,
UMTS1_TD1 mode
15
15
19
24
dB
dB
UMTS2_TD2 pin to UMTS1_TD1 pin
UMTS2_TD2 pin to UMTS3_TD3 pin
Iso
700 to 960 MHz,
UMTS2_TD2 mode
25.0
25.0
31.8
36.0
dB
dB
UMTS2_TD2 pin to UMTS1_TD1 pin
UMTS2_TD2 pin to UMTS3_TD3 pin
Iso
1710 to 2170 MHz,
UMTS2_TD2 mode
15.0
15.0
23.9
24.1
dB
dB
UMTS2_TD2 pin to UMTS1_TD1 pin
UMTS2_TD2 pin to UMTS3_TD3 pin
Iso
2170 to 2700 MHz,
UMTS2_TD2 mode
15
15
20
19
dB
dB
UMTS3_TD3 pin to UMTS1_TD1 pin
UMTS3_TD3 pin to UMTS2_TD2 pin
Iso
700 to 960 MHz,
UMTS3_TD3 mode
25.0
25.0
38.5
31.9
dB
dB
UMTS3_TD3 pin to UMTS1_TD1 pin
UMTS3_TD3 pin to UMTS2_TD2 pin
Iso
1710 to 2170 MHz,
UMTS3_TD3 mode
15.0
15.0
29.9
23.6
dB
dB
UMTS3_TD3 pin to UMTS1_TD1 pin
UMTS3_TD3 pin to UMTS2_TD2 pin
Iso
2170 to 2700 MHz,
UMTS3_TD3 mode
15
15
26
20
dB
dB
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
5
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 3. SKY18120-11 General Electrical Specifications (Note 1) (3 of 4)
(VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted
Parameter
Symbol
Test Condition
(Note 2)
Min
Typical
Max
Units
Voltage Standing Wave Ratio (VSWR)
Input VSWR @ GSM850/EGSM900_TX pin
VSWR
824 to 915 MHz,
GSM850/EGSM900_TX
mode
1.2:1
1.6:1
–
Output VSWR @ ANT pin
VSWR
824 to 915 MHz,
GSM850/EGSM900_TX
mode
1.4:1
1.6:1
–
Input VSWR @ DCS1800/PCS1900_TX pin
VSWR
1710 to 1910 MHz,
DCS1800/PCS1900_TX
mode
1.2:1
1.7:1
–
Output VSWR @ ANT pin
VSWR
1710 to 1910 MHz,
DCS1800/PCS1900_TX
mode
1.4:1
1.7:1
–
Input VSWR @ ANT pin
VSWR
GSM receive mode:
1.3:1
1.3:1
1.7:1
1.7:1
–
–
1.3:1
1.3:1
1.7:1
1.7:1
–
–
1.2:1
1.2:1
1.6:1
1.6:1
–
–
1.2:1
1.2:1
1.6:1
1.6:1
–
–
869 to 960 MHz
1805 to 1990 MHz
Output VSWR @ RX1/2/3/4 pins
VSWR
GSM receive mode:
869 to 960 MHz
1805 to 1990 MHz
Input VSWR @ ANT pin
VSWR
UMTS/TD mode:
824 to 960 MHz
1710 to 2170 MHz
Output VSWR @ UMTS1/2/3_TD1/2/3 pins
VSWR
UMTS/TD mode:
824 to 960 MHz
1710 to 2170 MHz
Operating Modes and Current Consumption
GSM850/EGSM900 transmit
ICC
25
50
μA
DCS1800/PCS1900 transmit
ICC
25
50
μA
TD-SCDMA transmit
ICC
25
50
μA
GSM receive
ICC
25
50
μA
TD-SCDMA receive
ICC
25
50
μA
Control current
ICTRL
1.5
20.0
μA
2.5
5.0
μs
Switching Time
Rise/fall
50% VCTRL to 90% RF
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 3. SKY18120-11 General Electrical Specifications (Note 1) (4 of 4)
(VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted
Parameter
Symbol
Test Condition
(Note 2)
Min
Typical
Max
Units
1648 to 1830 MHz,
PIN = +35 dBm
–52
–35
dBm
2472 to 2745 MHz,
PIN = +35 dBm
–52
–35
dBm
3420 to 3820 MHz,
PIN = +32 dBm
–67
–35
dBm
5130 to 5730 MHz
PIN = +32 dBm
–60
–35
dBm
1648 to 1698 MHz,
PIN = +26 dBm
–62
–34
dBm
2472 to 2547 MHz,
PIN = +26 dBm
–60
–34
dBm
3700 to 3960 MHz,
PIN = +26 dBm
–62
–34
dBm
5550 to 5940 MHz,
PIN = +26 dBm
–60
–34
dBm
Harmonic Power
GSM850/EGSM900_TX pin to ANT pin
DCS1800/PCS1900_TX pin to ANT pin
UMTSx_TDx pins to ANT pin
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: NTC = Normal test conditions (TA = 25 °C, VDD = 2.8 V).
ETC = Extreme test conditions (TA = –35 °C to +85 °C, VDD = 2.65 to 3.30 V).
Table 4. SKY18120-11 Control Logic
Pin/Mode
VC1
(Pin 5)
VC2
(Pin 4)
VC3
(Pin 3)
VC4
(Pin 2)
GSM850/EGSM900_TX
High
Low
Low
High
DCS1800/PCS1900_TX
High
Low
Low
Low
RX1
Low
High
Low
High
RX2
Low
High
Low
Low
RX3
Low
Low
Low
High
RX4
Low
Low
Low
Low
UMTS1_TD1
Low
Low
High
Low
UMTS2_TD2
Low
Low
High
High
UMTS3_TD3
Low
High
High
Low
Note 1: “High” = 1.8 V; “Low” = 0 V. Any state other than that described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected]sinc.com • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
7
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Evaluation Board Description
Package and Handling Information
The SKY18120-11 Evaluation Board is used to test the
performance of the SKY18120-11 SP9T Antenna Switch Module.
An Evaluation Board schematic diagram is provided in Figure 3.
Table 5 provides the Bill of Materials (BOM) list for Evaluation
Board components. An assembly drawing for the Evaluation Board
is shown in Figure 4.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Package Dimensions
The PCB layout footprint for the SKY18120-11 is provided in
Figure 5. Typical case markings are shown in Figure 6. Package
dimensions for the 16-pin MCM are shown in Figure 7, and tape
and reel dimensions are provided in Figure 8.
THE SKY18120-11 is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design & SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 3. SKY18120-11 Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Table 5. SKY18120-11 Evaluation Board Bill of Materials
Component
Value
Size
C1
100 nF
0201
C2
10 pF
0201
L1
18 nH
0201
R1
1.3 kΩ
0201
R2
1.3 kΩ
0201
R3
1.3 kΩ
0201
R4
1.3 kΩ
0201
Figure 4. SKY18120-11 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
9
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Figure 5. SKY18120-11 PCB Layout Footprint
(Top View)
Figure 6. Typical Part Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
10
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Figure 7. SKY18120-11 16-Pin MCM Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
11
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Figure 8. SKY18120-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
12
February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F
DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE
Ordering Information
Model Name
SKY18120-11 0.7-2.7 GHz SP9T Antenna Switch
Module With GSM Transmit Filters
Manufacturing Part Number
SKY18120-11
Evaluation Board Part Number
EN31-D858-003
Copyright © 2010, 2011, 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012
13