DATA SHEET SKY13347-360LF: 0.5 – 3.0 GHz SPST Switch, 50 Ω Terminated Applications RF2 Wireless infrastructure systems 50 Ω Features 50 Ω terminated RF output Low insertion loss: 0.7 dB @ 2.0 GHz High isolation: 35 dB @ 2.0 GHz RF1 Small, DFN (8-pin, 2 x 2 mm) package (MSL1, 260 C per JEDEC J-STD-020) S2178 Figure 1. SKY13347-360LF Block Diagram Description The SKY13347-360LF is a pHEMT GaAs Single-Pole, SingleThrow (SPST) switch with a 50 Ω terminated output. The high linearity performance, low insertion loss, and high isolation achieved by the SKY13347-360LF make it an ideal choice for many cellular and wireless infrastructure applications. The switch is manufactured in a compact, 2 x 2 mm, 8-pin Dual Flat No-Lead (DFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. N/C 1 8 RF2 GND 2 7 V1 GND 3 6 VS N/C 4 5 RF1 S2179 Figure 2. SKY13347-360LF Pinout – 6-Pin MLPD (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201393A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 1 DATA SHEET • SKY13347-360LF SPST SWITCH Table 1. SKY13347-360LF Signal Descriptions Pin # Name Description Pin # Name Description 1 N/C No connection. May be connected to ground with no change in performance. 5 RF1 RF port 1. Must be DC blocked. 2 GND Ground 6 VS DC bias voltage. Refer to Table 4. 3 GND Ground 7 V1 DC control voltage. Refer to Table 4. 4 N/C No connection. May be connected to ground with no change in performance. 8 RF2 RF port 2. Must be DC blocked. Table 2. SKY13347-360LF Absolute Maximum Ratings Maximum Units DC supply voltage Parameter VS 6 V Control voltage V1 VS V Input power PIN +32 dBm Storage temperature TSTG –40 +125 C Operating temperature TOP –40 +85 C Note: Symbol Minimum Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Functional Description Electrical and Mechanical Specifications Switching is controlled by a single control voltage on the V1 pin. Depending on the logic applied to the control pin, the RF1 and RF2 signals (pins 5 and 8, respectively) are connected to each other either by a low insertion loss path or a high isolation path. The absolute maximum ratings of the SKY13347-360LF are provided in Table 2. Electrical specifications are provided in Table 3. Both RF ports of the switch require DC blocking capacitors. The value of either blocking capacitor determines the low frequency of operation. Typical performance characteristics of the SKY13347-360LF are illustrated in Figures 3 through 7. The state of the SKY13347-360LF is determined by the logic provided in Table 4. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201393A DATA SHEET • SKY13347-360LF SPST SWITCH Table 3. SKY13347-360LF Electrical Specifications (Note 1) (V1 = 0 V and +3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, CBLK = 47 pF, Unless Otherwise Noted) Parameter Insertion loss Symbol IL Test Condition Min Iso RL Units 0.60 0.65 0.70 0.70 0.75 0.80 0.70 0.75 0.80 0.80 0.85 0.90 dB dB dB dB dB dB RF1 to RF2 45 35 35 35 30 30 dB dB dB dB dB dB 0.5 GHz to 3.0 GHz, RF1 and RF2 in insertion loss state 20 dB 0.5 GHz to 3.0 GHz, RF2 in isolation state 15 dB 0.5 GHz 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz 3.0 GHz Return loss Max RF1 to RF2 0.5 GHz 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz 3.0 GHz Isolation Typical 40 30 30 30 25 25 1 dB Input Compression Point IP1dB 0.5 to 3.0 GHz +31 dBm 3rd Order Input Intercept Point IIP3 0.5 to 3.0 GHz, PIN = +5 dBm/tone, 1 MHz spacing +40 dBm 70 10 85 10 ns ns ns ns Switching speed 10% to 90% RF 90% to 10% RF 50% V1 to 90% RF 50% V1 to 10% RF Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201393A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 3 DATA SHEET • SKY13347-360LF SPST SWITCH Typical Performance Characteristics (V1 = 0 V and +3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, CBLK = 47 pF, Unless Otherwise Noted) 0 0 –0.1 –0.3 Return Loss (dB) Insertion Loss (dB) RF1 RF2 –5 –0.2 –0.4 –0.5 –0.6 –0.7 –10 –15 –20 –0.8 –25 –0.9 –1.0 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 –30 3.00 0.50 0.75 1.00 1.25 Frequency (GHz) 1.75 2.00 2.25 2.50 2.75 3.00 Frequency (GHz) Figure 3. RF1 to RF2 Insertion Loss vs Frequency Figure 4.Return Loss (Insertion Loss State) vs Frequency 0 0 –5 Return Loss (dB) –10 Isolation (dB) 1.50 –20 –30 –10 –15 –20 –40 –25 –50 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 Frequency (GHz) Figure 5. Isolation vs Frequency –30 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 Normalized Insertion Loss (dB) 0 –0.1 –0.2 –0.3 –0.4 –0.5 –0.6 –0.7 –0.8 –0.9 +2 +4 +6 +8 +10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 Input Power (dBm) Figure 7. Normalized Insertion Loss vs Input Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 2.75 3.00 Figure 6. RF2 Return Loss (Isolation State) vs Frequency +0.1 –1.0 0 2.50 Frequency (GHz) October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201393A DATA SHEET • SKY13347-360LF SPST SWITCH Table 4. SKY13347-360LF Truth Table Note: VS (Pin 6) V1 (Pin 7) RF State 1 0 Isolation 1 VS Insertion loss “1” = +1.8 V to +5.0 V. “0” = 0 V to +0.2 V. Any state not described in this Table places the switch into an undefined state. An undefined state will not damage the device. Evaluation Board Description Package and Handling Information The SKY13347-360LF Evaluation Board is used to test the performance of the SKY13347-360LF SPDT Switch. An Evaluation Board schematic diagram is provided in Figure 8. An assembly drawing for the Evaluation Board is shown in Figure 9. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SKY13347-360LF is provided in Figure 10. Typical case markings are shown in Figure 11. Package dimensions for the 6-pin MLPD are shown in Figure 12, and tape and reel dimensions are provided in Figure 13. × 1 2 3 × 4 The SKY13347-360LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. N/C RF2 GND V1 GND VS N/C RF1 8 CBL RF2 7 Switch Control (See Table 4) 6 5 DC Bias (See Table 4) CBL Note: CBL = 47 pF for >500 MHz operation; 220 pF for operation down to 50 MHz. Higher values recommended for lower frequency operation. Exposed paddle must be grounded. RF1 S2180 Figure 8. SKY13347-360LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201393A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 5 DATA SHEET • SKY13347-360LF SPST SWITCH VS V1 RF2 RF1 CBL CBL S2181 Figure 9. SKY13347-360LF Evaluation Board Assembly Diagram 8X 0.70 R0.20 8X 0.45 8X 0.25 Pin 1 0.50 Pitch 2X 0.85 0.25 2X 0.45 Exposed Soldering Area, Typical S1477 Figure 10. SKY13347-360LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201393A DATA SHEET • SKY13347-360LF SPST SWITCH Pin 1 Indicator Skyworks Part # Figure 11. Typical Part Markings (Top View) 0.90 +0.10/–0.15 C 2 0.20 Ref Seating Plane A B 0.45 +0.05/–0.07 Exposed Pad Detail A 0.02 +0.03/–0.02 Pin 1 Indicator -B- 2 0.15 C 2X 8X 3 0.08 C Detail C 0.90 ± 0.10 0.15 C 2X 1.70 +0.10/–0.15 0.85 +0.05/–0.07 Detail B 2 Places 0.10 C Top View Side View Bottom View R0.12 Typ 0.25 0.30 ± 0.10 -A- CL R0.20 0.5 0.25 +0.05/–0.07 5 0.10 M C A B 0.05 M C Detail C 8 Places Detail B Detail A All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink slug as well as the terminals.. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. S1415 Figure 12. SKY13347-360LF 8-Pin DFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201393A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 7 DATA SHEET • SKY13347-360LF SPST SWITCH ∅1.50+ P0.10/–0.00 0.30 ± 0.01 (T) Pin #1 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.75 ± 0.10 B A B 1.20 ± 0.10 (Ko) 8.00 +0.30/–0.10 A 3.50 ± 0.05 2.60 ± 0.10 (Bo) R0.30 Max ∅1.00 Min. 2.60 ± 0.10 (Ao) B R0.30 Max A Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape material: transparent conductive HSA. 3. Cover tape size: 5.40 mm width. 4. All measurements are in millimeters. S1480 Figure 13. SKY13347-360LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201393A DATA SHEET • SKY13347-360LF SPST SWITCH Ordering Information Model Name SKY13347-360LF SPST Switch Manufacturing Part Number SKY13347-360LF Evaluation Kit Part Number SKY13347-360LF-EVB Copyright © 2010 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201393A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 9