Datasheet - Teledyne Microwave

K-BAND LOW NOISE AMPLIFIER
LNA-192-212-XXX
19.2 GHz - 21.2 GHz
This Ka-Band Low Noise Amplifier (LNA)
is designed to meet the extended K-Band
Satcom bands and is ideally suited for
airborne or SWaP applications where size
weight and power are critical.
The unit has an industry beating 1.3 dB Noise
figure over the full 2 GHz Bandwidth. With a
total weight of 0.5 lbs and small size the unit
is ideal for todays integrated light weight KaBand terminals.
Other products that may be of interest include:
Low Noise Block Converters (Ku & X-Band)
Block Up Converters (Ku & X-Band)
Low Noise Amplifiers (Ku & K-Band)
Solid State Power Amplifiers (X, Ku & Ka-Band)
Synthesizers (L, C or X-Band)
TELEDYNE
MICROWAVE SOLUTIONS
Everywhereyoulook
TM
1274 Terra Bella Avenue, Mountain View, CA 94043
Tel: 1.800.832.6869 or +1.650.962.6944 Fax: +1.650.962.6845
www.teledynemicrowave.com
microwave@teledyne.com
K-Band Low Noise Amplifier
19.2 GHz - 21.2 GHz
Specifications:
Parameter
Value
Noise Figure @25 C
95 K (1.3 dB)
Operating Frequency
Range
19.2 to 21.2 GHz min/max
O
O
Operating Temperature
Range
-54 to +95 °C min/max
Small-Signal Gain
40 dB min
44 dB max
P1dB
+15 dBm min
3rd OIP
23 dBm
Input Overdrive
18 dBm
In-Band Spurious
-35 dBc max
Out of Band Spurious
-35 dBc max
Group Delay variation
over any 10 MHz
0.1 nsec max
AM/PM Conversion
0.1 O/dB max
DC Supply Voltage
8-12 VDC max
Current
50 mA
Output Connector
2.92mm (f)
Input Waveguide
WR-42
Input / Output VSWR
1.4:1
Humidity
100%
Size
1.0” X 2” X 0.5”
Weight
0.5 lbs max
4X #4-40 UNC X .31 DP.
HELICOIL
.670
.335
WR-42 WAVEGUIDE SURFACE
(CHEM FILM)
1.298
.270
.54
.649
CL
.105
.62
.615
.320
.640
J1
CL
1.020
K-BAND
LNA-192-212-011
J2
1.230
GND
.515
+12V
C'BORE Ø.156
X .435 DP
1.030
.25
RF OUT
2.92mm FEMALE
FIELD REPLACEABLE
1.17
.67
1.03
.87
.54
2.69
MOUNTING SURFACE
(CHEM FILM)
06/13