MQME-270-R Reverse Polarity Protection Filter HIGH RELIABILITY EMI FILTER -400V to +400V 2A 1.6Ω @ 125°C >80dB @ 500kHz Continuous Input Output Current Max. DC Resistance Differential Attenuation FULL POWER OPERATION: -55ºC to +125ºC The MilQor® series of high-reliability EMI filters brings SynQor’s field proven technology and manufacturing expertise to the Military/Aerospace industry. SynQor’s innovative QorSeal™ packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these filters have high differential-mode and commonmode attenuation, low DC resistance, and a stabilizing bulk capacitor resistor. They follow conservative component derating guidelines and they are designed and manufactured to comply with a wide range of military standards. B -Y-H -R 270 ME MQ I FILTER360W EM n 2A i 270 Design Process Designed & Manufactured in the USA Featuring QorSeal™ Hi-Rel Assembly MQME series filters are: • Designed for reliability per NAVSO-P3641-A guidelines • Designed with components derated per: — MIL-HDBK-1547A — NAVSO P-3641A Qualification Process MQME series filters are qualified to: • MIL-STD-810F — consistent with RTCA/D0-160E/F/G • SynQor’s First Article Qualification — consistent with MIL-STD-883F • SynQor’s Long-Term Storage Survivability Qualification • SynQor’s on-going life test Features • • • • • 2A output current Reverse polarity protection Very low DC resistance > 80 dB differential-mode attenuation at 500kHz > 60 dB common-mode attenuation at 500kHz Stabilizing bulk capacitor and damping resistor • included • All capacitors are X7R multi-layer ceramic Designed to meet all MIL-STD 461 EMI and • most RTCA/D0-160E/F/G Section 22 lightning requirements Specification Compliance In-Line Manufacturing Process • • • • • • AS9100 and ISO 9001:2008 certified facility Full component traceability Temperature cycling Constant acceleration 24, 96, 160 hour burn-in Three level temperature screening Product # MQME-270-R Phone 1-888-567-9596 MQME series filters (with MQFL converters) are designed to meet: • MIL-HDBK-704-7 (A through F) • RTCA/DO-160E/F/G Section 16 • MIL-STD-1275B/D • DEF-STAN 61-5 (part 6)/5 • MIL-STD-461 (C, D, E) • RTCA/DO-160E/F/G Section 22 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 1 MQME-270-R Current: 2A Technical Specification BLOCK DIAGRAM POSITIVE OUTPUT POSITIVE INPUT RDAMPING PINS 1, 2, 3 PINS 4, 5, 6 PINS 10, 11, 12 PINS 7, 8, 9 C BULK ANTI-PARALLEL DIODE INPUT RETURN OUTPUT RETURN TYPICAL CONNECTION DIAGRAM +VIN -VIN +Vout MQME EMI FILTER +VIN +Vout MQFL DC-DC CONVERTER -Vout IN RTN +VIN Load OUT RTN +Vout MQFL DC-DC CONVERTER IN RTN Load OUT RTN TO OTHER LOADS Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 2 MQME-270-R Current: 2A Technical Specification MQME-270-R Electrical Characteristics Parameter Min. Typ. Max. Units Notes & Conditions Group A Vin=270V DC ±5%, P= 320W unless otherwise specified ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Transient (≤1 s) Isolation Voltage (I/O to case, I to O) Continuous Transient (≤1 s) Output Current Operating Case Temperature Storage Case Temperature Lead Temperature (20 s) ELECTRICAL CHARACTERISTICS Input Voltage Continuous Transient (≤1 s, Rs* = 0 Ω) Transient (≤100 ms, Rs* = 0 Ω) Output Voltage (continuous) Output Current (continuous) Power (continuous) DC Resistance (Rdc) TCASE = 25°C TCASE = 125°C Rectifier Drop (Vd) Power Dissipation (2A output current) TCASE = 25°C TCASE = 125°C Anti-Parallel Diode Forward Current Continuous Transient (≤ 8 ms) Forward Voltage (@ 0.1 A) Total Differential-Mode Capacitance Total Common-Mode Capacitance Bulk Capacitor Damping Resistor Noise Attenuation INPUT VOLTAGE SPIKE SUPPRESSION Output Voltage Deviation due to a Spike Input Voltage Spike (Centered on Vin) ±200V, 10µs, Rs ≤ 0.5Ω, | Q | ≤ 250µC ±400V, 5µs, Rs ≤ 0.5Ω, | Q | ≤ 250µC ±600V, 10µs, Rs = 50Ω Subgroup3 See Note 1 -800 -1000 800 1000 V V -500 -1000 500 1000 3 125 135 300 V V A °C °C °C -55 -65 -400 400 -500 500 -1000 1000 Vout = Vin - (Iin x Rdc) - Vd 2 320 See Note 1 for negative limits " See Note 1 1, 2, 3 1, 2, 3 1, 2, 3 See Note 5 1.3 1.6 Ω Ω V 1 3 6.5 7.5 W W 1 3 0.2 2 1 A A V µF µF µF Ω 1, 2, 3 0.8 0.4 V V V V A W HB grade Products, See Note 6 1 0.44 0.6 10 1, 2, 3 Measured across input or output pins Measured between any pin to case See Figure 1 See Note 2 -50 -50 -50 150 150 150 ΔV ΔV ΔV MIL-STD-461C (CS06). See Note 4 MIL-STD-461C (CS06). See Note 4 RTCA/DO-160E * Rs = Source Impedance Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 3 MQME-270-R Current: 2A Technical Specification MQME-270-R Electrical Characteristics (Continued) Parameter Min. Typ. Max. Units Notes & Conditions Group A Vin=270V DC ±5%, P= 320W unless otherwise specified ISOLATION CHARACTERISTICS Isolation Voltage (any pin to case) Continuous Transient (≤ 100 µs) Isolation Resistance (any pin to case) RELIABILITY CHARACTERISTICS Calculated MTBF (MIL-STD-217F2) GB @ Tcase = 70ºC AIF @ Tcase = 70ºC WEIGHT CHARACTERISTICS Device Weight -500 -800 100 500 800 Subgroup3 V V MΩ 17.5 887 106 Hrs. 103 Hrs. 79 g 1 1 Electrical Characteristics Notes 1. While the filter will survive these input voltage limits, the filter's output voltage will be outside the limits for an MQFL converter input voltage range. 2. Verified by qualification testing and analysis. 3. Only the ES and HB grade products are tested at three temperatures. The B and C grade products are tested at one temperature. Please refer to the Construction and Environmental Stress Screening Options table for details. 4. With an external 2uF capacitor in series with a 5ohm resistor connected across the output of the MQME filter module. 5. Product of input current and output voltage must be less than 320W 6. The specified operating case temperature for ES grade products is -45ºC to 100ºC. The specified operating case temperature for C grade products is 0ºC to 70ºC. * Rs = Source Impedance Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 4 MQME-270-R Current: 2A Technical Specification 20 100 Output Impedance Magnitude (ohms) 0 Attenuation (dB) -20 -40 -60 -80 -100 -120 -140 -160 -180 0.01 Common Mode Dif f erential Mode 0.1 1 10 100 1000 10000 10 1 0.1 0.01 0.01 100000 Frequency (kHz) 0.1 1 10 100 1000 Frequency (kHz) Figure 1: Typical Common Mode and Differential Mode Attenuation provided by the filter as a function of frequency. Both input lines are connected to chassis ground through 50Ω resistors. The filter case is also connected to chassis ground. Figure 2: Typical Output Impedance (magnitude) of the filter looking back into its output pins with the input pins connected to a source with zero source impedance. Figure 3: MIL-STD-461E Method CE101 Low Frequency Conducted Emissions. Limit line (in brown) is the ‘Submarine Applications DC Curve’. Setup described on Page 6. Figure 4: MIL-STD-461E Method CE102 High Frequency Conducted Emissions. Limit line (in brown) is the ‘Basic Curve’. Setup described on Page 6. Figure 5: MIL-STD-461E Method RE101 Low Frequency Radiated Emissions. Limit line (in brown) is the ‘Standard Curve’ from MIL-STD-461C Method RE01, which is more strict than all RE101 limits. Setup described on Page 6. Figure 6: MIL-STD-461E Method RE102 High Frequency Radiated Emissions. Limit line (in brown) is the ‘Submarine External to Pressure Hull Curve’. Setup described on Page 6. Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 5 MQME-270-R Current: 2A Technical Specification BASIC OPERATION AND FEATURES The MQME-270-R is a multi-stage differential-mode and commonmode passive EMI filter designed to interface a power source with one or more SynQor DC/DC converters (or other loads that create EMI). Each stage of this filter is well damped to avoid resonances and oscillations, and only X7R multi-layer ceramic capacitors are used. Figure 1 shows the typical differential and common-mode attenuation provided by this filter when the source impedance is 50W to chassis ground on each input line. The MQME-270-R EMI filter includes a large bulk capacitor (also X7R) with a series damping resistor to correct for the unstabilizing effect of a converter’s negative input resistance. A white paper discussing this negative input resistance and the need for corrective damping can be found on the SynQor website (see Input System Instability application note). Figure 2 shows the magnitude of the filter’s output impedance when the filter input is connected to a stiff voltage source. When used with SynQor’s DC/DC converters, the MQME-270-R EMI filter is designed to pass all of the relevant MIL-STD-461C/ D/E requirements to their most stringent limits. The MIL-STD-461 Compliance Matrix Table lists these requirements and describes the setup used to pass them. Figures 3 - 6 show results from selected conductive and radiated emissions tests. The filter is also designed to pass the waveform types and applications specified in RTCA/DO-160E/F/G Section 22 (Lightning Induced Transient Susceptibility) to Level 4 (some waveforms / applications require external transient suppression circuitry). The Section 22 Compliance Matrix Table lists these waveforms and applications and describes the setup used to pass them. Product # MQME-270-R Phone 1-888-567-9596 A typical application would place the MQME filter close to the input of the DC/DC converter, with the cases of the filter and the converter connected together through a ground plane. Both cases are electrically conductive, so connection to the cases can be made with the fasteners used to secure the device. Do not connect the outputs of multiple MQME-270-R filters in parallel. Connecting filters in this manner may result in slightly unequal currents to flow in the positive and return paths of each filter. These unequal currents may cause the internal common-mode chokes to saturate and thus cause degraded common-mode rejection performance. REVERSE POLARITY PROTECTION: The MQME-270-R EMI filter has a series-connected diode. This diode blocks reverse current flow if the filter's input voltage is mistakenly connected with the wrong polarity. The anti-parallel diode, working with the reverse polarity diode, ensures that the filter's output voltage goes only slightly negative during this time, and therefore satisfying the minimum input voltage specifications of SynQor's MQFL converters. The reverse polarity diode also preforms a useful function during negative polarity spikes and surges, and during brief power interrupts. Since it stops current from flowing negatively through the EMI filter back toward the source, thediode allows the total bulk capacitor (located both within and external to the filter) to better hold up the output voltage during these transients. www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 6 MQME-270-R Current: 2A Technical Specification SEE NOTE 7 1 2 3 4 5 6 +VIN +VOUT +VIN +VOUT +VIN +VOUT IN RTN IN RTN IN RTN MQME-270-R-X-HB EMI FILTER 270in 2A 360W OUT RTN MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN OUT RTN 12 11 10 9 8 7 0.250 [6.35] 1.50 [38.10] 1.260 [32.00] 0.200 [5.08] TYP. NON-CUM. 0.040 [1.02] PIN 2.50 [63.50] 2.76 [70.10] 3.00 [76.20] 0.050 [1.27] 0.128 [3.25] 0.220 [5.59] 2.96 [75.2] 0.228 [5.79] 0.390 [9.91] Case X SEE NOTE 7 1 2 3 4 5 6 +VIN +VOUT +VIN +VOUT +VIN IN RTN IN RTN IN RTN +VOUT MQME-270-R-U-HB EMI FILTER 270in 2A 360W OUT RTN MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN OUT RTN 12 11 10 9 8 7 2.50 [63.50] 2.76 [70.10] 3.00 [76.20] 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 1.50 [38.10] 1.260 [32.00] 0.040 [1.02] PIN 0.128 [3.25] 0.42 [10.7] 0.050 [1.27] 0.220 [5.59] 2.80 [71.1] 0.390 [9.91] Case U NOTES PIN DESIGNATIONS 1) Pins 0.040’’ (1.02mm) diameter 2) Pins Material: Copper Alloy Finish: Gold over Nickel plating, followed by Sn/Pb solder dip 3) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm) 4) Weight: 2.8 oz (78.5 g) typical 5) Workmanship: Meets or exceeds IPC-A-610C Class III 6) Print Labeling on Top Surface per Product Label Format Drawing 7) Pin 1 identification hole, not intended for mounting (case X and U) Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Pin # Function 1 2 3 4 5 6 Positive input Positive input Positive input Input return Input return Input return Doc.# 005-0006166 Rev. C Pin # Function 7 8 9 10 11 12 Output Return Output Return Output Return Positive output Positive output Positive output 08/14/2013 Page 7 MQME-270-R Current: 2A Technical Specification 0.300 [7.62] 0.140 [3.56] 1.15 [29.21] 0.250 [6.35] TYP 1 2 3 4 5 6 +VIN +VOUT +VIN +VOUT MQME-270-R-Y-HB +VIN IN RTN OUT RTN IN RTN IN RTN +VOUT EMI FILTER 270in 2A 360W MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN OUT RTN 1.750 [44.45] 12 2.00 11 [50.80] 10 1.50 9 [38.10] 8 1.750 7 [44.45] 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 0.040 [1.02] PIN 0.050 [1.27] 0.220 [5.59] 0.375 [9.52] 2.50 [63.50] 2.96 [75.2] 0.228 [5.79] 0.390 [9.91] Case Y Case Z (variant of Y) 0.250 [6.35] Case W (variant of Y) 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 0.200 [5.08] TYP. NON-CUM. 0.040 [1.02] PIN 0.040 [1.02] PIN 0.22 [5.6] 0.050 [1.27] 0.42 [10.7] 0.36 [9.14] 0.050 [1.27] 0.22 [5.6] 2.80 [71.1] 0.525 [13.33] 0.390 [9.91] 0.525 [13.33] 0.390 [9.91] 2.80 [71.1] NOTES PIN DESIGNATIONS 1) Pins 0.040’’ (1.02mm) diameter 2) Pins Material: Copper Alloy Finish: Gold over Nickel plating, followed by Sn/Pb solder dip 3) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm) 4) Weight: 2.8 oz (78.5 g) typical 5) Workmanship: Meets or exceeds IPC-A-610C Class III 6) Print Labeling on Top Surface per Product Label Format Drawing 7) Pin 1 identification hole, not intended for mounting (case X and U) Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Pin # Function 1 2 3 4 5 6 Positive input Positive input Positive input Input return Input return Input return Doc.# 005-0006166 Rev. C Pin # Function 7 8 9 10 11 12 Output Return Output Return Output Return Positive output Positive output Positive output 08/14/2013 Page 8 MQME-270-R Current: 2A Technical Specification Lightning Induced Transient Susceptibility RTCA/DO-160E/F/G Section 22 Compliance Matrix This table shows the RTCA/DO-160E/F/G Section 22 requirements/limits that will be met* by a stand-alone setup comprised of: RTCA/DO-160E/F/G Pin Injection RTCA/DO-160E/F/G Section 22 Waveform Maximum Level Passed 3 4 4 4† 5a 4† Single- and Multiple-Stroke Cable Induction 2 4** 3 4 Single- and Multiple-Stroke Ground Injection 4 4 5 4 3 4 Multiple-Burst Cable Induction Test Conditions Signal applied to +Vin pin. Input Return pin connected to system ground Signal applied to unshielded power cable bundle Signal applied between metal ground plane and system ground Signal applied to unshielded power cable bundle * Requirement is considered to be met as long as transient deviations in the converter’s output voltage remain within ±10% of its initial value. † For these waveforms at Level 3 and above, an external transient suppressor of sufficient energy rating must placed across the filter’s input pins to keep the differential transient input voltage below +200V/-50V. Negative polarity waveforms may cause power flow to the converter to be interrupted long enough to cause a graceful shutdown and restart of the converter. Also, the reverse voltage protection feature of the -T filter is required to protect the converter (but not the filter) from negative polarity waveform. ** For this waveform at a Level 4 and above, external transient suppressors of sufficient energy rating must be added between the filter’s input power pins and its case to keep the common-mode transient input voltage below +800V. Will be met by any MQME / MQHE P Filter • MQME-28-P Filter • MQFL-28-05S Converter • 120W Resistive load • Metal Chassis Plane • MQME-270-P Filter • MQFL-270-05S Converter • 120W Resistive load • Metal Chassis Plane Hi-Rel Will be met by any MQME / MQHE P Filter • MQME-28-T Filter • MQFL-28-05S Converter • 120W Resistive load • Metal Chassis Plane • MQME-270-P Filter • MQFL-270-05S Converter • 120W Resistive load • Metal Chassis Plane Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 9 MQME-270-R Current: 2A Technical Specification EMI Military Standard 461 Compliance Matrix This table shows the MIL-STD-461 requirements/limits that will be met* by the stand-alone setups indicated below: MIL-STD-461C MIL-STD-461D/E/F Mil-Std-461 Mil-Std-461 Requirement Most Stringent Limit Listed Conducted Emissions CE01 CE03 CE07 Class A5 (Submarine) Class A5 (Submarine)‡ Class A1 (Aircraft) Conducted Susceptibility CS01 CS02 CS06 CS10 CS11 Class A5 (Submarine) Class A5 (Submarine) Class A1/A5 (Aircraft/Sub) Class A5 (Submarine) Class A5 (Submarine) Radiated Emissions Radiated Susceptibility RE01 RE02† RS01 RS02 RS03 Class A5 (Submarine) Class A5 (Submarine) Class A5 (Submarine) Class A1/A5 (Aircraft/Sub) Class A4 (Surface Ship) Requirement Most Stringent Limit Listed Conducted Emissions CE101 CE102 Submarine Basic Curve Conducted Susceptibility CS101 CS106 CS114 CS115 CS116 Curve #2 461F Only Curve #5 Basic Waveform Imax = 10A RE101 Navy Radiated Emissions Radiated Susceptibility Submarine RE102† RS101 RS103 Fixed Wing Internal, >25 meters Nose to Tail Army Aircraft External * Susceptibility requirements/limits are considered to be met as long as transient deviations in the converter’s output voltage remain within ±10% of its initial value. † Met with metal screen shield covering the filter, converter, and resistive load. ‡ In almost every case the limit listed is the most stringent of the requirements. The one exception is CE03 - High Frequency Broadband Conducted Emissions, Converter with Passive Filter. In this case the filter and converter passed the A1 limit. The filter and converter pass the CE03 - Narrowband Conducted Emissions at the A5 limit level. Hi-Rel Product # MQME-270-R • MQME-28-P (or -T) Filter • MQFL-28-05S Converter • 120W Resistive load • Metal Chassis Plane • MQME-270-P Filter • MQFL-270-05S Converter • 120W Resistive load • Metal Chassis Plane Phone 1-888-567-9596 MCOTS www.synqor.com • MCOTS-F-28-P Filter • MCOTS-28-05S Converter • 120W Resistive load • Metal Chassis Plane • MCOTS-F-270-P Filter • MCOTS-270-05-QT Converter • 120W Resistive load • Metal Chassis Plane Doc.# 005-0006166 Rev. C 08/14/2013 Page 10 MQME-270-R Current: 2A Technical Specification CONSTRUCTION AND ENVIRONMENTAL STRESS SCREENING OPTIONS Screening Consistent with MIL-STD-883F Element Evaluation ( C-Grade ES-Grade HB-Grade specified from 0 ºC to +70 ºC specified from -45 ºC to +100 ºC specified from -55 ºC to +125 ºC ) ( ) ( ) No Yes Yes * Yes Yes Yes Temperature Cycle Method 1010 No Condition B (-55 ºC to +125 ºC) Condition C (-65 ºC to +150 ºC) Constant Acceleration Method 2001 (Y1 Direction) No 500g Condition A (5000g) Burn-in Method 1015 24 Hrs @ +125 ºC 96 Hrs @ +125 ºC 160 Hrs @ +125 ºC +25 ºC -45, +25, +100 ºC -55, +25, +125 ºC Full QorSeal Full QorSeal Full QorSeal * Yes Yes QorSeal QorSeal QorSeal Internal Visual Final Electrical Test Mechanical Seal, Thermal, and Coating Process Method 5005 (Group A) External Visual 2009 Construction Process * Per IPC-A-610 Class 3 MilQor converters and filters are offered in three variations of environmental stress screening options. All MilQor converters use SynQor’s proprietary QorSeal™ Hi-Rel assembly process that includes a Parylene-C coating of the circuit, a high performance thermal compound filler, and a nickel barrier gold plated aluminum case. Each successively higher grade has more stringent mechanical and electrical testing, as well as a longer burn-in cycle. The ESand HB-Grades are also constructed of components that have been procured through an element evaluation process that pre-qualifies each new batch of devices. Product # MQME-270-R Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 11 MQME-270-R Current: 2A Technical Specification MilQor Filter Family Matrix The tables below show the array of MilQor filters available. When ordering SynQor converters, please ensure that you use the complete part number according to the table in the last page.Contact the factory for other requirements. Features Available Product Continuous Family Input Designator Voltage MQME-28 40V MQME-28E 70V MQHE-28 40V MQHE-28E 70V MQHE-270 Power (Amperage) Rating Version (see table below) Enable PassThrough Circuitry Transient Suppression Circuitry Soft-Start Circuitry Reverse Polarity Protection Circuitry T • • • • T6 • • • • P 320W (20A) 160W (10A) P 400V 160W (1A) P MQME-270 400V 320W (2A) MQME-270L 400V 200W (3A) Product # MQME-270-R (In Addition to Passive Filter Components) Phone 1-888-567-9596 P • R P • R www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 12 MQME-270-R Current: 2A Technical Specification PART NUMBERING SYSTEM The part numbering system for SynQor’s MilQor DC-DC converters follows the format shown in the table below. Model Name Input Voltage Range Version 28 28E P T T6 270 270L P R MQME MQHE Package Outline/Pin Configuration Screening Grade U X Y W Z C ES HB Not all combinations make valid part numbers, please contact SynQor for availability. See the Product Summary web page for more options. Example: MQME-270-R–Y–ES APPLICATION NOTES A variety of application notes and technical white papers can be downloaded in pdf format from the SynQor website. PATENTS SynQor holds the following U.S. patents, one or more of which apply to each product listed in this document. Additional patent applications may be pending or filed in the future. 5,999,417 6,222,742 6,545,890 6,577,109 6,594,159 6,731,520 6,894,468 6,896,526 6,927,987 7,050,309 7,072,190 7,085,146 7,119,524 7,269,034 7,272,021 7,272,023 7,558,083 7,564,702 7,765,687 7,787,261 8,023,290 8,149,597 Contact SynQor for further information and to order: Phone: Toll Free: Fax: E-mail: Web: Address: Product # MQME-270-R 978-849-0600 888-567-9596 978-849-0602 [email protected] www.synqor.com 155 Swanson Road Boxborough, MA 01719 USA Phone 1-888-567-9596 Warranty SynQor offers a two (2) year limited warranty. Complete warranty information is listed on our website or is available upon request from SynQor. Information furnished by SynQor is believed to be accurate and reliable. However, no responsibility is assumed by SynQor for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SynQor. www.synqor.com Doc.# 005-0006166 Rev. C 08/14/2013 Page 13