MB101F ~ MB110F Voltage 100V ~ 1000V 1.0 Amp Surface Mount Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES MBF High surge current capability Saves space on printed circuit boards Glass passivated structure MECHANICAL DATA Terminals: Solderable per MIL-STD-750, Method 2026 Case: MBF Mounting position: Any PACKAGE INFORMATION Package MPQ Leader Size MBF 5K 13 inch MARKING Part Number Marking Part Number Marking MB101F 10M1 MB106F 10M6 MB102F 10M2 MB108F 10M8 MB104F 10M4 MB110F 10M10 Millimeter Min. Max. 4.5 5.0 3.6 4.1 0.5 0.7 2.3 2.7 1.2 1.6 A B C D E REF. F G H I J Millimeter Min. Max. 0.2 TYP. 6.4 7.0 1.3 1.7 0.15 0.22 0.5 1.1 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise s pecified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage MB 101F MB 102F MB 104F MB 106F MB 108F MB 110F Unit 100 200 400 600 800 1000 V VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Maximum Average Forward Current IF(AV) 1 A Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 35 A Maximum instantaneous forward voltage @ IF =1A VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage Typical junction capacitance TA=25°C TA=125°C 1 Thermal resistance junction to ambient Thermal resistance junction to lead 2 2 Operating and Storage Temperature range IR 5 40 µA CJ 13 pF RθJA 85 °C/W RθJL 30 °C/W TJ, TSTG -55~150 °C Note: 1. Measured at 1MHz and applied reverse voltage of 4 V D.C. 2. Mounted on glass epoxy PC board with 4×(5×5mm2 ）copper pad. http://www.SeCoSGmbH.com/ 13-Jan-2015 Rev.A Any changes of specification will not be informed individually. Page 1 of 2 MB101F ~ MB110F Elektronische Bauelemente Voltage 100V ~ 1000V 1.0 Amp Surface Mount Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 13-Jan-2015 Rev.A Any changes of specification will not be informed individually. Page 2 of 2