● ● ● ● ● ● ● Features Unregulated Converter Industry Standard Pinout 1kVDC or 2kVDC Isolation UL94V-0 Package Material Optional Continuous Short Circuit Protected Fully Encapsulated Custom Solutions Available Efficiency to 87% ECONOLINE DC/DC-Converter with 3 year Warranty Description The ROL DC/DC converters are typically used in general purpose low power isolation and voltage matching applications, and feature a full industrial operating temperature range of -40°C to +85°C without derating. 0.5 Watt SIP4 Single Output Selection Guide Part Number SIP 4 Output Voltage (VDC) Output Current (mA) Efficiency (2kV) Input Voltage (VDC) (%) Max. Capacitive Load(1) ROL-xx05S (H) 5, 12 5 100 78-82 470µF ROL-xx12S (H) 5, 12 12 42 80-86 150µF ROL-xx15S (H) 5, 12 15 33 80-87 150µF xx = Input Voltage (other input and output voltage combinations available on request) * add Suffix “P” for Continuous Short Circuit Protection, e.g. ROL-0505S/P, ROL-0505S/HP Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy 1.2%/1% of Vin typ. Load Voltage Regulation (10% to 100% full load) 10% max. / 4% typ. Output Ripple and Noise (20MHz limited) 2011/65/EU 6/6 E358085 EN-60950-1 Certified UL-60950-1 Certified 100mVp-p max. Operating Frequency 20kHz min. / 54kHz typ. Efficiency at Full Load 70% min. / 85% typ. Efficiency at 50%l Load ROL 65% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage Isolation Voltage RoHS ±5% Line Voltage Regulation (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance 20pF min. / 75pF max. Isolation Resistance 10 GΩ min. Short Circuit Protection Derating-Graph (Ambient Temperature) 1 Second P-Suffix Continuous Operating Temperature Range (free air convection) -40°C to +85°C (see Graph) Storage Temperature Range 100 -55°C to +125°C 80 Package Weight 1.4g 60 Packing Quantity 42 pcs per Tube MTBF (+25°C) } Detailed Information see (+85°C) Application Notes chapter "MTBF" using MIL-HDBK 217F 985 x 103 hours using MIL-HDBK 217F 200 x 103 hours Certifications EN General Safety Report: SPCLVD1109103 UL General Safety Report: E358085 EN 60950-1:2006 + A12:2011 Output Power (%) 95% RH Relative Humidity 40 30 20 0 Safe Operating Area -40 0 50 85 Operating Temperature °C 100 150 UL 60950-1, 2nd Edition **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-6 REV: 0/2015 www.recom-power.com ROL Series ECONOLINE DC/DC-Converter Typical Characteristics ROL-0515S ROL-0505S Efficiency / Load 80 80 60 60 40 40 20 0 0% 20% 40% 60% Total Output current (%) 80% 100% Deviation / Load 25.000 0 0% 20% 40% 60% Total Output current (%) 80% 100% 40% 80% 60% Total Output current (%) 100% Deviation / Load 20.000 Deviation from Nominal (%) 20.000 Deviation from Nominal (%) 20 25.000 15.000 10.000 5.000 0.000 -5.000 -10.000 Efficiency / Load 100 Efficiency % Efficiency % 100 0% 20% 40% 80% 60% Total Output current (%) 15.000 10.000 5.000 0.000 -5.000 -10.000 100% 0% 20% Notes Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. ROL Note 1 Package Style and Pinning (mm) 4 PIN SIP Package 6.00 10.00 RECOM ROL-0505S 0.51 typ. **** RECOM ROL-0505S **** 0.51 typ. 1 2 3 4 4.10 Recommended Footprint Details 11.50 0.25 1.9 Bottom View 7.62 2.54 1.00 ø+0.15/0 1.27 Top View 2.54 ROL Pin Connections Pin # Single 1 –Vin 2 +Vin 3 –Vout 4 +Vout XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 E-7