Features Regulated Converters Description ● ● ● ● ● ● ● ● ● ECONOLINE DIP24 Low Profile Package Dual Outputs from a Single Supply 2:1 Wide Range Voltage Input 3kVDC Isolation UL94V-0 Package Material Continuous Short Circuit Protection Low profile 7mm Height Approved for Medical Applications Efficiency to 85 % DC/DC-Converter with 3 year Warranty 3 Watt DIP24 Low Profile Regulated Dual Output The RW_D series with 2:1 input voltage ranges and maximum height of 7,0 mm has been designed for industrial automation and medical markets where a dual output rail needs to be generated from a single rail source. The converters supply the full 3 Watts without additional heat-sinks over the temperature range -40°C to +85°C. Selection Guide Part Number DIP24 Miniature Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency % Max Capacitive Load(1) RW-0505D 4.5 – 9 ±5 ±300 71 ±2200µF RW-0509D 4.5 – 9 ±9 ±167 73 ±1000µF RW-0512D 4.5 – 9 ±12 ±125 74 ±1000µF RW-0515D 4.5 – 9 ±15 ±100 75 ±1000µF RW-1205D 9 – 18 ±5 ±300 76 ±2200µF RW-1209D 9 – 18 ±9 ±167 80 ±1000µF RW-1212D 9 – 18 ±12 ±125 83 ±1000µF RW-1215D 9 – 18 ±15 ±100 83 ±1000µF RW-2405D 18 – 36 ±5 ±300 78 ±2200µF RW-2409D 18 – 36 ±9 ±167 81 ±1000µF RW-2412D 18 – 36 ±12 ±125 85 ±1000µF RW-2415D 18 – 36 ±15 ±100 85 ±1000µF RW-4805D 36 – 72 ±5 ±300 78 ±2200µF RW-4809D 36 – 72 ±9 ±167 82 ±1000µF RW-4812D 36 – 72 ±12 ±125 84 ±1000µF RW-4815D 36 – 72 ±15 ±100 84 ±1000µF EN-60950-1 Certified EN-60601-1 Certified RW-D Derating-Graph Specifications (Core Operating Area) Input Voltage Range 2:1 Output Voltage Accuracy ±1% typ. / ±2% max. Line Voltage Regulation 0.1% typ. / 0.2% max. Load Voltage Regulation (10% to 100% full load) 0.2% typ. / 0.5% max. Minimum Load 10% (Ambient Temperature) 3W 100 (2) 50mVp-p max. Operating Frequency 100KHz min. / 150kHz typ. Efficiency at Full Load See above No Load Power Consumption 250mW max. (tested for 1 second) 3000VDC (rated for 1 minute*) 1500VAC / 60Hz Isolation Capacitance 80 2W 60 40 1W 20 0 Safe Operating Area -40 0 50 Operating Temperature °C 85 90 95 150 20pF min. / 40pF typ. / 60pF max. Isolation Resistance 1 GΩ min. Short Circuit Protection Continuous Operating Temperature Range (free air convection) Output Power (%) Output Ripple and Noise (20MHz limited) Isolation Voltage RoHS 2011/65/EU 6/6 -40°C to +85°C (see Graph) *Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. continued on next page Refer to Application Notes www.recom-power.com REV: 0/2015 E-137 RW-xxxxD Series ECONOLINE DC/DC-Converter Specifications (Core Operating Area) Storage Temperature Range -55°C to +125°C Case Material Non-Conductive Black Plastic Potting Material Epoxy ( UL94V-0 ) Relative Humidity 95% RH Package Weight 7.7g Packing Quantity 15pcs per Tube MTBF (+25°C) (+85°C) } Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 1636 x 103 hours using MIL-HDBK 217F 303 x 103 hours Certifications EN General Safety Report: SPCLVD1212007 EN60950-1:2006 + A11:2009+A1:2010+A12:2011 EN Medical Safety Report: MDD1205098-3 + RM1205098-3 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Notes Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter Note 2: The RW-D series requires a minimum of 10% load on the output to maintain specified regulation. Operating under no-load conditions will not damage these devices; however, they may not meet all listed specifications. Typical Performance Efficiency / Load 100 2415 80 RW-xx15D 60 4815 RW-D Efficiency % 40 20 0 0% 20% 40% 60% 80% 100% Total Output current (%) Package Style and Pinning (mm) 24 PIN DIP Miniature Package Style 17.50 32.00 7.00 RECOM RW-1205D 3.81 15.24 0.51 4.60 **** Pin Connections Recommended Footprint Details 1.00 ø+0.15/0 2 3 9 11 Bottom View 23 22 16 2.54 14 2.54 Top View Pin Dual 2&3 -Vin 9 & 16 Com 11 -Vout 14 +Vout 22 & 23 +Vin NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-138 REV: 0/2015 www.recom-power.com