● ● ● ● ● Features LED DRIVER 25W Class II AC-DC LED Power Supply 500mA, 700mA, 1050mA or 1400mA Output Active Power Factor Correction >0.90 Efficiency to 85% EN and UL LIGHTLINE AC/DC-Converter with 5 year Warranty Selection Guide Part Number Rated Power (W) Output Current (mA) Output Voltage (VDC) Efficiency RACD25-500P 25 500 42 - 52 82% RACD25-700P 25 700 21 - 36 85% RACD25-1050P 25 1050 16 - 24 84% RACD25-1400P 25 1400 12-18 83% NOT RECOMMENDED FOR NEW DESIGNS (typ.) 25 Watt PFC Single Output Specifications (measured at 230VAC and 25°C ambient temperature) Input Voltage Range Input Frequency Range Power Factor 90-295 VAC or 127-417 VDC 47-63Hz Full Load, 230VAC >0.90 Full Load, 115VAC THD Current Accuracy AC Input Current Inrush Current (<2ms) >0.98 Full Load, 115VAC/230VAC 12% max. Full Load, 277VAC 14% max. 700mA Version ±7% others ±8% 115VAC 0.4A 230VAC 0.2A 264VAC Cold Start 20A Isolation Voltage E340696 UL 8750 Certified EN 61347 Certified 3.75kVAC / 1minute Short Circuit Protection Continuous Over Voltage Protection Over Temperature Protection RoHS 2011/65/EU 6/6 110% - 150% Rth Type Vibration Auto-Recovery Mode 10-500Hz, 2G, 60 Min. along X, Y and Z Storage Humidity Operating Humidity 10% - 95% RH 20% - 95% RH Non-Condensing Weight Dimension Operating Temperature Storage Temperature Ripple & Noise IP Rating Isolation Resistance Safety Standards MTBF (+25°C) using MIL-HDBK 217F Desing Lifetime The use of a circuit breaker with C-characteristic is recommended. RACD25-P Internal Thermistor 220g 174.5 x 30.5 x 25mm -20°C to +50°C -40°C to +80°C 3V max. IP67 100MΩ / 500VDC at 25°C EN61347-1 EN61347-2-13 UL8750 EN61000-3-2 Class C EN61000-4-2,3,4,5,6,11 EN61547 EN55015 FCC15 200 x 10³ hours 70 x 10³ hours Derating-Graph (Ambient Temperature) Load 100% 80% 70% 60% 40% AC 100V - 295V 20% Horizontal 70 50 Ambient Temperature (°C) -20 0 20 40 Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Refer to Application Notes L-36 REV: 0/2015 www.recom-power.com RACD25-P Series LIGHTLINE AC/DC-Converter Typical Characteristics Input Voltage vs. Output Load Load Maximum Number of LED drivers per circuit breakers Ta=25°C Condition 100% 80% 115VAC, 1Ohm 90° phase angle Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A C 32 48 57 72 B 24 38 46 58 C 38 62 74 92 B 28 44 53 66 C 44 71 84 106 60% 40% 230VAC, 1Ohm 90° phase angle 20% 90100 115 130 180 220 240 295 277VAC, 1Ohm 90° phase angle Input Voltage (VAC) 60Hz Package Style & Pinning 190.0 150 AC L (Brown) UL1015 20AWG UL1015 20AWG 2-R1.8 AC N (Blue) 150 78.0 tc V- (Black) 30.5 V+ (Red) 3.0 10 25.0 174.5 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-37