Detailed Information see - recom

THE POWER COMPANY
DC-DC & AC-DC
POWER CONVERTERS
SWITCHING REGULATORS
2007
C A T A L O G U E
2nd Edition
www.recom-international.com
www.recom-international.com
March-2006
1
KEY MARKETS & CERTIFICATIONS
Automotive
Telecommunication
Medical
Aviation
Transportation
High Isolation
Power up to
125 Watt
ISO 9001
Certified
TÜV
Certified
UL
Certified
CE
Certified
TS 16949
Certified
(Pending)
EN
Certified
RoHS
Compliant
SMD
Technology
Application
Engineering
Worldwide
Logistics
Worldwide
Distribution
THE POWER COMPANY
ECONOLINE
INNOLINE
POWERLINE
When quality, price and delivery are
paramount, ECONOLINE is the right
choice. Features of this product range
are converter powers from 0.25 to 40
Watts, industry standard dimensions
and pin-outs (including SMD-types)
and isolation voltage up to 6kVDC.
The "Econoline" range includes
unregulated and regulated converters with single, dual and dual isolated outputs. A well stocked inventory
and guaranteed delivery times from
2 to 6 weeks for non-stocked items, as
well as attractive pricing for call-off
orders are all available.
INNOLINE converters are RECOM's
extension to the ECONOLINE and
POWERLINE products with enhanced
specifications for severe and performance critical applications.
Innovative features such as non-isolating, high efficiency step-down
converters, trimmable outputs and
high power bricks for 50, 75, 100
and 125 Watts are included in this
product series, as well as selected
converters for ISDN, high input voltage or high output voltage applications.
A well stocked inventory and attractive
prices for call-off orders are all available.
The POWERLINE completes our range
of DC/DC and AC/DC catalogue converters. This range covers units from 5
to 40 Watts, with 2:1 and 4:1 DC/DC
input voltages, universal input AC/DC
modules, single, dual or triple outputs,
and isolation voltages up to
3kVAC/VDC. Six-sided shielding on
most DC/DC series with options like
remote ON/OFF or output voltage
trim guarantee a wide range of possible applications in various segments of
industrial design.
EN, UL, CSA and TÜV approvals
make these series ideal for all telecom,
medical and safety-critical applications
where certified isolation and safety
standards are required.
ECONOLINE Index
Page INNOLINE Index
ECONOLINE Converters
6 INNOLINE Converters
Page POWERLINE Index
Page
138 POWERLINE Converters
210
Applications Notes ECONOLINE
301 Tubes
331 POWERLINE AC/DC Converters
284
Tubes
331 Tapes
336 Applications Notes POWERLINE
322
Tapes
334
POWERLINE Heat-Sinks
329
Tubes
331
Specifications
RECOM makes every effort to ensure that the
specifications in this catalogue are complete and
accurate. RECOM reserves the right to alter or improve the specification, internal design or manu-
facturing process at any time, without notice.
Please check with your supplier that you have the
most current and complete specification for your
product before use. Customers may check that
they have the most up to date datasheets by
visiting the RECOM website at:
www.recom-international.com or by calling or
sending an e-mail to RECOM Technical Support.
www.recom-international.com
RECOM portfolio, market and product focus
RECOM International Power has served
the electronics industry for more than
30 years and offers single, dual, and
triple output DC/DC and AC/DC converters as standard catalogue products
for fast delivery. Our principle markets
are in the performance-oriented telecommunication, industrial control, data
processing, transportation (incl. avionics), medical, military and test equipment markets, although our converters
are used in virtually every industry
requiring low–to–medium power voltage conversion in the 0.25-125W
range.
We serve equally large original equipment manufacturers (OEMs) and smaller, lower volume users.
In thirty years of operation, we have
earned a reputation for fast turnaround on modified standards and
custom designed products that meet
application-specific performance and
customer specifications. From the
world's smallest "IC-style" surface
mount DC/DC converters to the most
efficient step down converters, RECOM
has built a solid reputation for technological innovation.
Due to our in-house production capability, our portfolio goes well beyond
the standard catalogue products to
cover leading-edge custom solutions,
based on application specific requirements.
RECOM – your solutionsprovider for power converters
We have the ability to provide technical
support on a worldwide basis.
This support goes beyond simply
responding to customer queries.
From design to delivery we proactively
identify and implement technical
solutions required by our customers.
Standard Products
RECOM Head Office close to Frankfurt Rhein-Main-Airport.
Designed for long term
performance
The combination of our sophisticated
analogue design, careful circuit board
layout, toroidal magnetics, quality components, experienced manufacturing
and thorough testing all contribute to
above-average long term performance.
Modified Standard Products
RECOM modified standard products
offer a cost-effective alternative to a
completely new custom design.
Incorporating one of our standard circuit board designs, modified units are
available in quantities of five hundred
pieces or more, offering a variety of
options including:
Assembly consistency
Unit-to-unit quality is largely determined by good design. Whereas RECOM
employs surface mount technology as
much as possible, assembly and
handling by skilled staff is paramount.
As part of our continuing quality effort
RECOM manufacturing and distribution
facilities are ISO 9000 certified and we
are currently working on being TS/16949
approved.
• Custom labelling
• Non-standard outputs
• Non-standard inputs
• Custom case design
• Application-specific
custom specifications
RECOM standard catalogue DC/DC and
AC/DC converters are grouped into
single, dual, triple and multiple outputs. All types are available in a variety
of inputs and output voltages and
power ratings.
4
July-2006
www.recom-international.com
Customers and
RECOM International Power focuses
Quality come first on two key aspects –
The ultimate measure of quality Customer Satisfaction and Financial
RECOM employs stringent manufac- Performance
turing and testing criteria on all DC/DC
converters. 100% of all units on every
order are subjected to redundant testing
for compliance to performance specifications – without exception.
Customer Performance
Financial Performance
The key measure of the performance of
a company lies in its customer service
– on time delivery, consistent quality,
high reliability and value for money.
We constantly monitor and strive to
establish even higher levels of service
to our customers because, ultimately,
this is the source of our success.
During the last five years our
Compound Annual Growth has by far
outperformed the growth of the electronics industry. This exceptional financial performance provides the firm
foundation, the resources and the
confidence for us to continue serving
our major customers.
RECOM - The Companies
QA-Testing
As a result, RECOM enjoys an extremely
low failure rate – more than an order of
magnitude less than other converter
manufacturers.
RECOM
Development GmbH, Austria
RECOM
Distribution GmbH,
Austria
RECOM
Manufacturing Ltd., Taiwan
Customers Worldwide
RECOM customers include many industry leaders from around the world.
And each one of our several thousand
customers is provided with one-on-one
service. Whether the order is for one
or ten thousand pieces, RECOM service
is always the same:
• On-schedule delivery
• 100% tested units
RECOMATIC
Electronics GmbH Vienna,
Austria
RECOM
Asia Pte. Ltd., Singapore
International Service
Recom customers are international and expect the delivery of quality, reliability,
innovation, service and support on a worldwide basis. This is why we not only
provide international manufacturing and sales offices, but also an advanced global distribution and representative network. Stocking distributors located around
the world provide an optimised and local service to our international customers.
RECOM International Power
Market Segments
www.recom-international.com
July-2006
5
ECONOLINE - CONTENTS
Unregulated Converters
Series
Power
(Watts)
Isolation
(kVDC)
Input Voltages
(VDC)
Output Voltages
(VDC)
No. of
Outputs
Case
Page
No.
RM & RL
0.25
1&2
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S
SIP4/DIP8
8
RQS/RQD
0.25
1
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
SMD
11
RO & RE
1
1&2
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S
SIP4/SIP7
16
ROM
1
3
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S
SIP4 Micro
19
RSS/RSD
1
1&3
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
SMD
22
RB & RA
1
1&2
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
SIP7/DIP14
28
RBM
1
3
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
SIP6 Micro
32
RJ & RG
1
3&4
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
DIP14
35
RK & RH
1
3&4
1.8, 3.3, 5, 9, 12, 15, 24
1.8, 3.3, 5, 9, 12, 15, 24
S&D
SIP7
38
RP
1
5.2
3.3, 5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S&D
SIP7
41
RxxPxx
1
5.2
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15
S&D
SIP7
44
RU
1
1
1.8, 3.3, 5, 9, 12, 24
1.8, 3.3, 5, 9, 12, 15, 24
D (isol.)
SIP7
47
RN
1.25
1&2
3.3, 5, 9, 12, 15, 24
3.3, 5, 7, 9, 12, 15, 24
S
DIP8
59
RxxP2xx
2
5.2
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15
S&D
SIP7
64
RTS/RTD
2
1&3
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S&D
SMD
67
RI
2
1
5, 9, 12, 15, 24
3.3, 5, 7, 9, 12, 15, 24
S
SIP4
70
RD & RC
2
1&2
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
D
SIP7/DIP14
73
REZ
2
1&2
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S
SIP7
76
RJZ/RGZ
2
3&4
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S&D
DIP14
79
RKZ
2
3&4
5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S&D
SIP7
82
RUZ
2
1
5, 9, 12, 24
3.3, 5, 9, 12, 15, 24
D (isol.)
SIP7
85
RV
2
6
3.3, 5, 9, 12, 15, 24
3.3, 5, 9, 12, 15, 24
S&D
DIP24 Miniature
91
RAA
5
1
5, 12, 24
5, 12, 15
S&D
25.0x23.5x10.0mm
120
Products in bold type are new products for 2006
Regulated Converters
Series
Power
(Watts)
Isolation
(kVDC)
Input Voltages
(VDC)
Output Voltages
(VDC)
No. of
Outputs
Case
Page
No.
RZ
0.5
1
5, 9, 12, 15, 24
5, 12, 15
S
SMD
14
RSZ
1
1&2
3.3,5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17,
18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28
as above
3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13, 14
S
SMD
26
RSZ P (short circuit protected)
3, 3.3, 4.85, 5
continued on next page
6
July-2006
www.recom-international.com
ECONOLINE - CONTENTS
Regulated Converters
Series
Power Isolation
(Watts) (kVDC)
Input Voltages
(VDC)
Output Voltages
(VDC)
No. of
Outputs
Case
Page
No.
RSO
1
1, 2 & 3
4.5-9, 9-18, 18-36, 36-72
3.3, 5, 9, 12, 15
S&D
SIP8
50
RY & RX
1
1
5, 9, 12, 15, 24
5, 9, 12, 15, 24
S&D
SIP7/DIP14
53
RY-SCP_DCP
1
1
5, 12, 24
5, 12, 15
S&D
SIP7
56
1.5_1.8
1
5, 12, 24
3.3, 5, 9, 12, 15
S
DIP24/SMD
62
2
1, 2 & 3
4.5-9, 9-18, 18-36, 36-72
3.3, 5, 9, 12, 15
S&D
SIP8
88
REC2.2-SR_DR/H1
2.2
1
5, 12, 24, 48
3.3, 5, 9, 12, 15
S&D
DIP24/SMD
94
REC2.2-SRW_DRW/H*
REC2.2-SRWZ_DRWZ/H*
2.2
2.2
1, 2 & 3
1, 2 & 3
4.5-9, 9-18, 18-36, 36-72
9-36, 18-72
3.3, 5, 9, 12, 15
3.3, 5, 9, 12, 15
S&D
S&D
DIP24
DIP24
96
96
RW
3
1
4.5-9, 9-18, 18-36, 36-72
3.3, 5, 9, 12, 15
S
DIP24/SMD (Miniature)
99
RW
3
3
4.5-9, 9-18, 18-36, 36-72
±5, ±9, ±12, ±15
D
DIP24 (Miniature)
102
REC3-SR_DR/H1
3
1
5, 12, 24,48
3.3, 5, 9, 12, 15,
S&D
DIP24
104
REC3-SRW_DRW/H*
REC3-SRWZ_DRWZ/H*
3
3
1, 2 & 3
1, 2 & 3
9-18, 18-36, 36-72
9-36, 18-72
3.3, 5, 9, 12, 15
3.3, 5, 9, 12, 15
S&D
S&D
DIP24/SMD
DIP24/SMD
106
106
REC3-DRWI/A
3
2
4.5-9,9-18, 18-36, 36-72
5, 9, 12, 15
D (Isol.)
DIP24
109
4&6
4&6
4.5-9, 9-18, 18-36, 36-72
9-36, 18-72
3.3, 5, 9, 12, 15
3.3, 5, 9, 12, 15
S&D
S&D
DIP24/SMD
DIP24/SMD
111
111
1, 2 & 3
1, 2 & 3
9-18, 18-36, 36-72
9-36, 18-72
3.3, 5, 9, 12, 15
3.3, 5, 9, 12, 15
S&D
S&D
DIP24/SMD
DIP24/SMD
114
114
4&6
4&6
9-18, 18-36, 36-72
9-36, 18-72
3.3, 5, 9, 12, 15
3.3, 5, 9, 12, 15
S&D
S&D
DIP24/SMD
DIP24/SMD
117
117
REC1.5_1.8-SR_DR/H1
RS
REC3-SRW_DRW/(H4/H6)
3
REC3-SRWZ_DRWZ/(H4/H6) 3
REC5-SRW_DRW/H*
REC5-SRWZ_DRWZ/H*
5
5
REC5-SRW_DRW/(H4/H6)
5
REC5-SRWZ_DRWZ/(H4/H6) 5
REC7.5-S/DRW/H*/AM
7.5
1,2 & 3
9-18, 18-36, 36-72
3.3, 5, 9, 12, 15
S&D
DIP24/SMD
122
REC10-SRW/H
REC10-SRWZ_DRWZ/H
10
10
1
1
9-18, 18-36, 36-75
9-36, 18-75
3.3, 5, 12, 15, 24
3.3, 5, 12, 15
S&D
S&D
1" x 2”
1" x 2”
124
124
REC15-SRW/H
REC15-SRWZ_DRWZ/H
15
15
1
1
9-18, 18-36, 36-75
9-36, 10-40, 18-75
5, 12, 15, 24
3.3, 5, 12, 15
S&D
S&D
1" x 2"
1" x 2”
126
126
REC20-SRW/H
20
1
18-36, 36-75
2.5, 3.3, 5
S
1" x 2"
128
REC20-SRWB_DRWB/H
REC20-SRWBZ_DRWBZ/H
20
20
1
1
9-18, 18-36, 36-75
9-36, 18-75
5, 12, 15, 24
5, 12, 15, 24
S&D
S&D
2" x 2"
2" x 2"
130
130
REC30-SRWZ_DRWZ/H
30
1
10-40, 18-75
1.8, 2.5, 3.3, 5, 12, 15, 24
S&D
1.6" x 2"
132
REC40-SRW/H
40
1
36-75
1.8, 2.5, 3.3, 5, 12, 15, 24
S
1.6" x 2"
134
REC40-SRWB_DRWB /H
40
1
9-18, 18-36, 36-75
1.8, 2.5, 3.3, 5, 12, 15, 24
S&D
2" x 2"
136
Products in bold type are new products for 2006
For Block Diagrams, please refer to Application Notes
www.recom-international.com
July-2006
7
Features
Unregulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
Single Output Rail
Industry Standard Pinout
1kVDC & 2kVDC Isolation
High Efficiency for Low Power Applications
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Fully Encapsulated
Efficiency to 80%
DC/DC-Converter
RM & RL
Series
0.25 Watt
SIP4 & DIP8
Single Output
Selection Guide
Part
Number
(2kV)
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
SIP 4
DIP8
RM-xx1.8S
RL-xx1.8S (H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
139
70
RM-xx3.3S
RL-xx3.3S (H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
76
65-70
RM-xx05S
RL-xx05S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
5
50
66-72
RM-xx09S
RL-xx09S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
9
28
70-72
RM-xx12S
RL-xx12S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
12
21
70-72
RM-xx15S
RL-xx15S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
15
17
70-76
RM-xx24S
RL-xx24S (H)
1.8, 3.3, 5, 9, 12, 15, 24
24
10
70-80
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RM-051.8S/P, RM-051.8S/HP
EN-60950-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
(10% to 100% full load)
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
50mVp-p max.
Operating Frequency
50kHz min. / 90kHz typ. / 105kHz max.
Efficiency at Full Load
65% min. / 75% typ.
No Load Power Consumption
(tested for 1 second)
Rated Working Voltage
H-Suffix
H-Suffix
(long term isolation)
see Application Notes
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Capacitance
1 Second
Continuous
Operating Temperature Range (free air convection)
-40°C to +85°C (see Graph)
Storage Temperature Range
(+85°C)
8
-55°C to +125°C
95% RH
1.4g
1.8g
RM types
RL types
}
80
10 GΩ min.
Short Circuit Protection
P-Suffix
MTBF (+25°C)
100
25pF min. / 82pF max.
Isolation Resistance
Relative Humidity
Package Weight
(Ambient Temperature)
1000VDC min.
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
1327 x 103 hours
using MIL-HDBK 217F
302 x 103 hours
July-2006
Output Power (%)
Isolation Voltage
Isolation Voltage
Rated Working Voltage
Derating-Graph
45mW min. / 75mW typ. / 155mW max.
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
www.recom-international.com
ECONOLINE
RM & RL
Series
DC/DC-Converter
Typical Characteristics
RM/RL-xx05S
RM/RL-xx09S
Efficiency / Load
Efficiency / Load
100
100
60
60
40
40
20
0
3.305
0%
40%
20%
60%
80%
0
100%
Deviation / Load
0505
20.000
3.305
10.000
5.000
0.000
1205
-5.000
60%
0% 20%
40%
60%
Total Output current (%)
80%
100%
0509
15.000
80%
100%
3.309
10.000
5.000
0.000
1209
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
Efficiency / Load
100%
Efficiency / Load
100
100
3.312
1212
80
80%
RM/RL-xx15S
RM/RL-xx12S
0515
80
60
60
40
40
0512
Efficiency %
Efficiency %
40%
20%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
20
0%
40%
20%
60%
80%
100%
1215
20
0
Total Output current (%)
0%
40%
60%
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
20%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
3.312
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
0%
25.000
15.000
10.000
5.000
0.000
1212
-5.000
-10.000
0509
Total Output current (%)
25.000
0
3.309
20
Total Output current (%)
-10.000
1209
80
Efficiency %
Efficiency %
1205
0505
80
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
0515
10.000
5.000
0.000
-5.000
-10.000
July-2006
1215
9
ECONOLINE
RM & RL
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
4 PIN SIP Package
6.00
10.00
RECOM
RM-0505S
0.51
****
RECOM
RM-0505S
****
0.51
1 2 3 4
4.10
Recommended Footprint Details
11.50
0.25
1.9
Bottom View
1.00 ø+0.15/–0
2.54
1.25
7.62
Top View
2.54
RM Pin Connections
Pin #
Single
1
–Vin
2
+Vin
3
–Vout
4
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
8 PIN DIP Package
12.60
10.10
RECOM
RL-0505S
****
7.80
ø 0.51
3.25
7.62
Recommended Footprint Details
1.00ø+0.15/–0
7.62
7.62
1
4
Bottom View
7
5
5.08
10
2.54
ø 0.51
2.54
Top View
July-2006
RL Pin Connections
Pin #
Single
1
–Vin
4
+Vin
5
+Vout
7
–Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
ECONOLINE
1kVDC Isolation
Internal SMD Construction
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Efficiency to 80%
DC/DC-Converter
RQS & RQD
Series
Selection Guide
Part
Number
SMD
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RQS-xx1.8
1.8, 3.3, 5, 9, 12, 15, 24
1.8
139
70
RQS-xx3.3
1.8, 3.3, 5, 9, 12, 15, 24
3.3
76
65-70
RQS-xx05
1.8, 3.3, 5, 9, 12, 15, 24
5
50
66-72
RQS-xx09
1.8, 3.3, 5, 9, 12, 15, 24
9
28
70-72
RQS-xx12
1.8, 3.3, 5, 9, 12, 15, 24
12
21
70-72
RQS-xx15
1.8, 3.3, 5, 9, 12, 15, 24
15
17
70-76
RQS-xx24
1.8, 3.3, 5, 9, 12, 15, 24
24
10
70-80
RQD-xx1.8
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±70
70
RQD-xx3.3
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±38
65-70
RQD-xx05
1.8, 3.3, 5, 9, 12, 15, 24
±5
±25
66-72
RQD-xx09
1.8, 3.3, 5, 9, 12, 15, 24
±9
±14
70-72
RQD-xx12
1.8, 3.3, 5, 9, 12, 15, 24
±12
±11
70-72
RQD-xx15
1.8, 3.3, 5, 9, 12, 15, 24
±15
±9
70-76
RQD-xx24
1.8, 3.3, 5, 9, 12, 15, 24
±24
±5
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RQS-051.8/P, RQD-051.8/P
0.25 Watt
SMD
Single & Dual
Output
70-80
** add suffix -R for tape&reel packing e.g.
RQS-051.8-R. For more details and dimensions of the tapes and reels see page 334 to 336.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
100mVp-p max.
Operating Frequency
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
45mW min. / 75mW typ. / 105mW max.
(tested for 1 second)
(long term isolation)
25pF min. / 82pF max.
Isolation Resistance
1 Second
Continuous
Operating Temperature Range (free air convection)
MTBF (+25°C)
(+85°C)
}
-40°C to +85°C (see Graph)
ROHS compliant
-55°C to +125°C
245°C (30 sec) max.
(for more details see Application Notes)
95% RH
1.5g
2.2g
RQS types
RQD types
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
100
10 GΩ min.
Short Circuit Protection
P-Suffix
Relative Humidity
Package Weight
(Ambient Temperature)
1000VDC min.
see Application Notes
Isolation Capacitance
Storage Temperature Range
Reflow Temperature
Derating-Graph
65% min. / 75% typ.
using MIL-HDBK 217F
1345 x 103 hours
using MIL-HDBK 217F
310 x 103 hours
07-May-2007
80
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
60
40
Safe Operating Area
20
0
85 100
95
Operating Temperature °C
-40
0
50
150
11
ECONOLINE
RQS & RQD
Series
DC/DC-Converter
Typical Characteristics
RQS/RQD-xx05
RQS/RQD-xx09
Efficiency / Load
Efficiency / Load
100
100
60
60
40
40
20
0
3.305
0%
40%
20%
60%
80%
100%
0
Deviation / Load
0505
20.000
3.305
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
5.000
0.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
Efficiency / Load
3.312
1212
0515
80
60
40
40
0512
Efficiency %
Efficiency %
1209
-5.000
60
20
0%
40%
20%
60%
80%
1215
20
0
100%
0%
40%
60%
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
20%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
20.000
3.312
Deviation from Nominal (%)
Deviation from Nominal (%)
100%
3.309
100
80
12
80%
10.000
Efficiency / Load
10.000
5.000
-10.000
0509
15.000
100
-5.000
60%
RQS/RQD-xx15
RQS/RQD-xx12
0.000
40%
20%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
20.000
0%
25.000
15.000
15.000
0509
Total Output current (%)
25.000
0
3.309
20
Total Output current (%)
-10.000
1209
80
Efficiency %
Efficiency %
1205
0505
80
1212
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
0515
10.000
5.000
0.000
-5.000
-10.000
07-May-2007
1215
www.recom-international.com
RQS & RQD
Series
Package Style and Pinning (mm)
3rd angle
projection
8 PIN SMD Package
12.75
8.15
12.10
7.90
5.35
1.65
8
5
RECOM
RQS-xxxx
xxxx
7.30
2.54 x 3
4
1 2
7.40
9.00
Pin Connections
11.10
Pin #
Recommended Footprint Details
1.20
12.00
Bottom View
0.55
2.54
8
5
1 2
4
Top View
1.20
Single
1
–Vin
2
+Vin
4
–Vout
5
+Vout
8
NC
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
1.80
10 PIN SMD Package
8.15
15.24
14.70
5.35
1.65
10
7.90
RECOM
RQD-xxxx
xxxx
7.30
1 2
7.40
9.00
2.54x4
Pin #
Recommended Footprint Details
0.55
12.00
2.54
1.20
www.recom-international.com
10
7
Top View
1 2
4 5
Pin Connections
11.10
Bottom View
7
4 5
1.20
07-May-2007
1.80
Dual
1{
–Vin
2
+Vin
4
Com
5
–Vout
7
+Vout
10
NC
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
13
Features
Regulated
Converters
●
●
●
●
●
●
●
●
1kVDC Isolation
SMD Package Styles
5V, 12V and 15V Output
UL94V-0 Package Material
No Heatsink Required
No External Components
Optional Continuous Short Circuit Protected
Efficiency to 62%
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RZ-xx05S
5, 9, 12, 15, 24
5
100
50
RZ-xx12S
5, 9, 12, 15, 24
12
42
60
33
62
SMD
RZ-xx15S
5, 9, 12, 15, 24
15
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RZ-0505S/P
ECONOLINE
DC/DC-Converter
RZ
Series
0.5 Watt
SMD
Isolated
Single Output
** add suffix -R for tape&reel packing e.g.
RZ-0505-R. For more details and dimensions
of the tapes and reels see page 334 to 336.
Specifications (Core Operating Area)
Input Voltage Range
±5%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1% max.
Load Voltage Regulation (10% to 100% full load)
1% max.
Output Ripple and Noise (20MHz limited)
100mVp-p max.
Operating Frequency
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
50% min. / 60% typ.
No Load Power Consumption
127mW min. / 155mW typ. / 194mW max.
(tested for 1 second)
(long term isolation)
Isolation Capacitance
25pF min. / 75pF max.
Isolation Resistance
1 Second
Continuous
Operating Temperature Range (free air convection)
-40°C to +70°C (see Graph)
-55°C to +125°C
ROHS compliant
245°C (30 sec) max.
(for more details see Application Notes)
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+70°C)
14
}
100
10 GΩ min.
Short Circuit Protection
P-Suffix
Storage Temperature Range
Reflow Temperature
(Ambient Temperature)
1000VDC min.
see Application Notes
80
Output Power (%)
Isolation Voltage
Rated Working Voltage
Derating-Graph
60
40
Safe Operating Area
20
0
-40
0
50
85 100
70
150
Operating Temperature °C
1.9g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
1632 x 10 hours
using MIL-HDBK 217F
156 x 103 hours
07-May-2007
www.recom-international.com
ECONOLINE
RZ
Series
DC/DC-Converter
Typical Characteristics
RZ-xx12S
RZ-xx05S
0505
Efficiency %
20%
40%
60%
80%
100%
Total Output current (%)
40
0512
20
0
0515
60
40
20
0%
80
60
2405
40
2412
80
1205
60
100
Efficiency %
80
Efficiency %
Efficiency / Load
100
100
0
RZ-xx15S
Efficiency / Load
Efficiency / Load
1212
0% 20%
40%
60%
Total Output current (%)
80%
100%
1215
20
0
2415
0%
20%
40%
60%
80%
100%
Total Output current (%)
Package Style and Pinning (mm)
3rd angle
projection
10 PIN SMD Package
8.15
15.24
14.70
5.35
1.65
10
7.90
RECOM
RZ-xxxxS
xxxx
7.30
1 2
7.40
9.00
2.54x4
11.10
Pin #
0.55
12.00
2.54
1.20
10
7
Top View
1 2
4 5
Pin Connections
Recommended Footprint Details
Bottom View
7
4 5
1.20
1.80
Single
1
–Vin
2
+Vin
4
-Vout
5
-Vout
7
+Vout
10
NC
NC= No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
07-May-2007
15
●
●
●
●
●
●
●
Features
Unregulated
Converters
ECONOLINE
Industry Standard Pinout
1kVDC & 2kVDC Isolation
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Fully Encapsulated
Custom Solutions Available
Efficiency to 85%
DC/DC-Converter
RO & RE
Series
Selection Guide
Part
Number
SIP 4
Input
Voltage
Output
Voltage
Output
Current
Efficiency
SIP 7
(2kV)
(VDC)
(VDC)
(mA)
(%)
RO-xx1.8S
RE-xx1.8S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
555
70
RO-xx3.3S
RE-xx3.3S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RO-xx05S
RE-xx05S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RO-xx09S
RE-xx09S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
9
111
76-78
RO-xx12S
RE-xx12S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
12
83
78-80
RO-xx15S
RE-xx15S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-84
1 Watt
SIP4 & SIP7
Single Output
RO-xx24S
RE-xx24S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-85
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RO-051.8S/P, RO-051.8S/HP
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
(10% to 100% full load)
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
100mVp-p max.
Operating Frequency
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
70% min. / 80% typ.
No Load Power Consumption
101mW min. / 126mW typ. / 220mW max.
Isolation Voltage
Rated Working Voltage
H-Suffix
H-Suffix
1000VDC min.
see Application Notes
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Capacitance
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
80
95% RH
Package Weight
16
100
1 Second
Continuous
-55°C to +125°C
Relative Humidity
}
10 GΩ min.
-40°C to +85°C (see Graph)
Storage Temperature Range
(+85°C)
(Ambient Temperature)
20pF min. / 75pF max.
Isolation Resistance
MTBF (+25°C)
Derating-Graph
RO types
1.4g
RE types
2.2g
using MIL-HDBK 217F RO types
RE types
985 x 103 hours
992 x 103 hours
using MIL-HDBK 217F RO types
RE types
200 x 103 hours
145 x 103 hours
Detailed Information see
Application Notes chapter "MTBF"
July-2006
Output Power (%)
Isolation Voltage
Rated Working Voltage
(tested for 1 second)
(long term isolation)
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
www.recom-international.com
ECONOLINE
RO & RE
Series
DC/DC-Converter
Typical Characteristics
RO/RE-xx09S
RO/RE-xx05S
Efficiency / Load
Efficiency / Load
100
100
1205
3.305
80
60
60
0505
20
0% 20%
40%
60%
Total Output current (%)
80%
0
Deviation / Load
3.305
20.000
0505
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
0509
10.000
5.000
0.000
1209
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
Efficiency / Load
100
100
1212
0512
80
3.309
15.000
Efficiency / Load
1215
80
60
60
3.312
20
0%
40%
20%
80%
60%
0515
40
Efficiency %
40
Efficiency %
100%
RO/RE-xx15S
RO/RE-xx12S
100%
3.315
20
0
Total Output current (%)
0%
40%
20%
60%
80%
100%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
80%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
3.312
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
0
3.309
20
100%
25.000
-10.000
1209
40
Efficiency %
Efficiency %
40
0
0509
80
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
0515
3.315
10.000
5.000
0.000
-5.000
-10.000
July-2006
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
17
ECONOLINE
RO & RE
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
4 PIN SIP Package
6.00
10.00
RECOM
RO-0505S
****
0.51 typ.
RECOM
RO-0505S
****
0.51 typ.
1 2 3 4
4.10
Recommended Footprint Details
11.50
0.25
1.9
Bottom View
RO Pin Connections
Pin #
1.00 ø+0.15/–0
2.54
1.27
7.62
Single
1
–Vin
2
+Vin
3
–Vout
4
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
2.54
7 PIN SIP Package
6.00
10.20
RECOM
RE-0505S
****
RECOM
RE-0505S
****
0.51 typ.
Recommended Footprint Details
19.60
18
1.27
Bottom View
2.0
12.70
4
1 2
0.51 typ.
4.10
0.25
6
RE Pin Connections
1.00 ø+0.15/–0
Pin #
2.54
2
–Vin
4
–Vout
2.54
1
Top View
July-2006
Single
+Vin
6
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Micro Size SIP4 Package
3kVDC Isolation
Industry Standard Pinout
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Cost Effective
Efficiency to 85%
DC/DC-Converter
ROM
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%))
ROM-xx1.8S
1.8, 3.3, 5, 9, 12, 15, 24
1.8
550
70
ROM-xx3.3S
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
ROM-xx05S
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
ROM-xx09S
1.8, 3.3, 5, 9, 12, 15, 24
9
111
70-78
ROM-xx12S
1.8, 3.3, 5, 9, 12, 15, 24
12
83
78-82
ROM-xx15S
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-84
ROM-xx24S
1.8, 3.3, 5, 9, 12, 15, 24
24
41
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. ROM-051.8S/P
74-85
SIP4 Micro Size Pack.
1 Watt
SIP4
Micro Size
Single Output
Description
EN-60950-1 Certified
EN-60601-1 Certified
The ROM Micro Size DC/DC converter has been designed for isolating or converting DC power rails
respectively. It provides a small micro-size package, high efficiency, low output ripple, high 3kVDC
Isolation and an extended –40°C to +85°C operating temperature range.
State of the art packaging and automated manufacturing ensures cost-effectiveness and short lead times.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
101mW min. / 126mW typ. / 220mW max.
(tested for 1 second)
(long term isolation)
3000VDC min.
see Application Notes
Isolation Capacitance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
(+85°C)
100
80
20pF min. / 75pF max.
Isolation Resistance
MTBF (+25°C)
(Ambient Temperature)
70% min. / 80% typ.
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
100mVp-p max.
Operating Frequency
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
1g
}
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
3
using MIL-HDBK 217F
977 x 10 hours
using MIL-HDBK 217F
189 x 103 hours
July-2006
19
ECONOLINE
ROM
Series
DC/DC-Converter
Typical Characteristics
ROM-xx05S
ROM-xx09S
Efficiency / Load
Efficiency / Load
100
100
1205
3.305
80
60
60
0505
20
0% 20%
40%
60%
Total Output current (%)
80%
0
3.305
20.000
0505
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
0.000
-10.000
100%
1212
0512
1215
80
60
3.312
20
0%
40%
20%
80%
60%
0515
40
Efficiency %
Efficiency %
100%
100
100%
3.315
20
0
0%
40%
20%
60%
80%
100%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
20.000
1212
Deviation from Nominal (%)
Deviation from Nominal (%)
80%
ROM-xx15S
Total Output current (%)
20
0% 20%
40%
60%
Total Output current (%)
Efficiency / Load
40
10.000
5.000
-10.000
1209
-5.000
60
-5.000
0509
5.000
100
0.000
100%
10.000
Efficiency / Load
80
3.309
15.000
ROM-xx12S
15.000
80%
25.000
15.000
20.000
0% 20%
40%
60%
Total Output current (%)
Deviation / Load
Deviation / Load
0
3.309
20
100%
25.000
-10.000
1209
40
Efficiency %
Efficiency %
40
0
0509
80
3.312
0% 20%
40%
60%
Total Output current (%)
80%
15.000
0515
3.315
10.000
5.000
0.000
-5.000
-10.000
100%
July-2006
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
ROM
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
4 PIN SIP Micro Size Package
6.05
7.70
RECOM
ROM-0505S 0.51 typ.
****
RECOM
ROM-0505S
****
0.51 typ.
4.10
1 2 3 4
Recommended Footprint Details
11.50
0.25
1.9
Bottom View
2.54
RO Pin Connections
Pin #
1.00 ø+0.15/–0
1.0
1.27
7.62
www.recom-international.com
1.80
Top View
2.54
July-2006
0.7ø+0.15/–0
Single
1
–Vin
2
+Vin
3
–Vout
4
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
21
Features
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
1kVDC Isolation
Internal SMD Construction
UL94V-0 Package Material
Power Density 1.8W/cm3
Optional Continuous Short Circuit Protected
Efficiency to 85%
DC/DC-Converter
RSS** &
RSD**
Series
Selection Guide
SMD
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(3kV)
(VDC)
(VDC)
(mA)
(%)
RSS**-xx1.8
(H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
555
70
RSS**-xx3.3
(H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RSS**-xx05
(H)
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RSS**-xx09
(H)
1.8, 3.3, 5, 9, 12, 15, 24
9
111
76-78
RSS**-xx12
(H)
1.8, 3.3, 5, 9, 12, 15, 24
12
84
78-80
RSS**-xx15
(H)
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-84
RSS**-xx24
(H)
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-85
RSD**-xx1.8
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±278
70
RSD**-xx3.3
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±152
70
RSD**-xx05
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±5
±100
74-78
RSD**-xx09
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±9
±56
76-80
RSD**-xx12
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±12
±42
78-82
RSD**-xx15
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±15
±33
78-82
RSD**-xx24
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±24
±21
80-84
RSS** : ** without marking denotes standard pinning
** with marking 8 denotes with eight pins
RSD** : ** without marking denotes standard pinning
** with marking 10 denotes with ten pins
xx = Input Voltage
EN-60950-1 Certified
EN-60601-1 Certified (suffix H)
** add suffix -R for tape&reel packing e.g.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RSS-051.8/P, RSS-051.8/HP
RSS-0505-R. For more details and dimensions
of the tapes and reels see page 334 to 336.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
Operating Frequency
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
(Ambient Temperature)
50kHz min. / 100kHz typ. / 105kHz max.
70% min. / 80% typ.
RSS & RSS8 types
101mW min. / 126mW typ. / 220mW max.
RSD & RSD10 types
87mW min. / 130mW typ. / 230mW max.
(tested for 1 second)
1000VDC min.
H-Suffix
(tested for 1 second)
3000VDC min.
(long term isolation)
see Application Notes
15pF min. / 70pF max.
Isolation Resistance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
100
80
60
40
Safe Operating Area
20
0
85 100
95
Operating Temperature °C
-40
0
50
150
-55°C to +125°C
Reflow Temperature ROHS compliant (for more details see Application Notes)
22
Derating-Graph
100mVp-p max.
Isolation Capacitance
Relative Humidity
1 Watt
SMD
Single & Dual
Output
Output Power (%)
Part
Number
245°C (30 sec) max.
95% RH
continued on next page
07-May-2007
www.recom-international.com
ECONOLINE
RSS**
Series
DC/DC-Converter
&
RSD**
Typical
Specifications
Characteristics
(Core Operating Area
Package Weight
MTBF (+25°C)
(+85°C)
}
RSS & RSS8 types
RSD & RSD10 types
Detailed Information see
Application Notes chapter "MTBF"
1.5g
2.2g
1045 x 103 hours
183 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Typical Characteristics
RSS**-xx09
RSS**-xx05
Efficiency / Load
Efficiency / Load
100
100
1205
3.305
80
60
60
0505
20
0% 20%
40%
60%
Total Output current (%)
80%
1209
40
Efficiency %
Efficiency %
40
0
0509
80
100%
3.309
20
0
0% 20%
40%
60%
Total Output current (%)
Deviation / Load
25.000
3.305
20.000
0505
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
15.000
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
5.000
0.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
RSS**-xx15
Efficiency / Load
100
1212
0512
80
1215
80
60
60
3.312
20
0%
40%
20%
80%
60%
0515
40
Efficiency %
40
Efficiency %
1209
-5.000
100
100%
3.315
20
0
0%
40%
20%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
0509
10.000
Efficiency / Load
10.000
5.000
0.000
3.312
-5.000
-10.000
3.309
15.000
RSS**-xx12
0
100%
Deviation / Load
25.000
-10.000
80%
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
0515
3.315
10.000
5.000
0.000
-5.000
-10.000
07-May-2007
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
23
ECONOLINE
RSS**
Series
DC/DC-Converter
&
RSD**
Typical Characteristics
RSD**-xx09
RSD**-xx05
Efficiency / Load
Efficiency / Load
100
100
0505
1205
60
60
40
40
3.305
20
0
0% 20%
40%
60%
Total Output current (%)
80%
0509
80
Efficiency %
Efficiency %
80
100%
1209
3.309
20
0
0% 20%
40%
60%
Total Output current (%)
Deviation / Load
3.305
20.000
0505
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
5.000
0.000
-10.000
RSD**-xx15
Efficiency / Load
0512
1212
60
3.312
20
0%
40%
20%
60%
80%
20
0
100%
0%
40%
20%
60%
80%
100%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
20.000
1212
Deviation from Nominal (%)
Deviation from Nominal (%)
1215
40
Efficiency %
Efficiency %
40
24
3.315
0515
80
60
10.000
5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
100
80
-5.000
1209
-5.000
Efficiency / Load
0.000
100%
0509
10.000
100
20.000
3.309
15.000
RSD**-xx12
15.000
80%
25.000
15.000
0
100%
Deviation / Load
25.000
-10.000
80%
3.312
0% 20%
40%
60%
Total Output current (%)
80%
15.000
1215
0515
10.000
5.000
0.000
-5.000
-10.000
100%
07-May-2007
3.315
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
ECONOLINE
RSS**
Series
DC/DC-Converter
RSD**
&
Package Style and Pinning (mm)
8 PIN Single SMD Package
12.75
8.15
5.35
1.65
8
7.90
12.10
10
5
RECOM
RSS-xxxx
xxxx
7.30
2.54 x 3
3rd angle
projection
10 PIN Dual SMD Package
RECOM
RSD-xxxx
xxxx
4
1 2
7.40
9.00
1 2
8.15
15.24
14.70
7
7.90
5.35
4 5
1.65
7.30
7.40
9.00
2.54x4
11.10
11.10
Pin Connections
1.20
Recommended Footprint Details
1
12.00
Bottom View
2.54
Pin #
0.55
Single
Dual
–Vin
–Vin
8
5
2
+Vin
+Vin
4
–Vout
Com
1 2
4
5
+Vout
–Vout
7
No Pin
+Vout
8
NC
No Pin
10
No Pin
NC
Top View
1.20
1.80
0.55
Recommended Footprint Details
Bottom View
12.00
1.20
2.54
10
7
Top View
1 2
4 5
1.80
1.20
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
**) Package Style and Pinning (mm)
8 PIN Single SMD Package
12.75
8.15
12.10
7.90
5.35
1.65
10 PIN Dual SMD Package
7.30
2.54 x 3
7.40
9.00
10 9 8 7 6
RECOM
RSS8-xxxx
xxxx
RECOM
RSD10-xxxx
xxxx
5.35
1 2 3 4
1 2 3 4 5
1.65
Pin #
Recommended Footprint Details
12.00
Bottom View
2.54
0.55
8 7 6 5
Top View
1 2 3 4
1.20
7.90
7.30
7.40
9.00
2.54x4
11.10
Pin Connections
11.10
1.20
8.15
15.24
14.70
8 7 6 5
1.80
Single
Dual
1
–Vin
–Vin
2
+Vin
+Vin
3
NC
NC
4
–Vout
Com
5
+Vout
–Vout
6
NC
NC
7
NC
+Vout
8
NC
NC
9
-
NC
10
-
NC
Recommended Footprint Details
0.55
Bottom View
2.54
12.00
1.20
10 9 8 7 6
1.20
Top View
1 2 3 4 5
1.80
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
07-May-2007
25
Features
Regulated
Converters
●
●
●
●
●
●
1kVDC & 2kVDC Isolation
UL94V-0 Package Material
No Heatsink Required
No External Components Required
Toroidal Magnetics
Optional Continuous Short Circuit Protected
ECONOLINE
DC/DC-Converter
RSZ/P
Series
Selection Guide
Part
Number
SMD
2kVDC
RSZ-xxxx
(H)
Standard
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
3.3, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28
3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14
Depending
on
Output Voltage
3
200
3.3
200
4.85
200
5
200
With Short Circuit Protection
RSZ-xx03/P (H) 3.3, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28
RSZ-xx3.3/P (H) 3.3, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28
RSZ-xx4.85/P (H) 3.3, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28
RSZ-xx05/P (H) 3.3, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28
1 Watt
SMD Miniature
Isolated
Single Output
** add suffix -R for tape&reel packing e.g.
xx = Input Voltage
RSZ-0505-R. For more details and dimensions
of the tapes and reels see page 334 to 336.
Ordering Example: RSZ-0514 (5VDC Input, 14VDC Output)
RSZ-244.8/HP (with 24VDC input, 4.85VDC Output, 2kVDC Isolation and
Continuous Short Circuit Protection)
Specifications (Core Operating Area)
Input Voltage Range
±5%
Output Voltage Accuracy
±2%
Line Voltage Regulation
1% max.
Load Voltage Regulation
1% max.
Output Ripple and Noise (at 20MHz BW)
Operating Frequency
100mVp-p max.
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
50% min. / 60% typ.
134mW min. / 217mW typ. / 350mW max.
Isolation Voltage
Rated Working Voltage
Isolation Voltage
Rated Working Voltage
(Ambient Temperature)
H-Suffix
H-Suffix
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Capacitance
70pF typ.
Isolation Resistance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air)
1 Second
Continuous
-40°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Reflow Temperature ROHS compliant (for more details see Application Notes)
100
80
Output Power (%)
No Load Power Consumption
Derating-Graph
60
40
Safe Operating Area
20
0
-40
0
50
85 100
70
150
Operating Temperature °C
245°C (30 sec) max.
Relative Humidity
95% RH
continued on next page
26
07-May-2007
www.recom-international.com
ECONOLINE
RSZ/P
Series
DC/DC-Converter
Specifications (Core Operating Area)
Package Weight
P-Suffix
MTBF (+25°C)
(+70°C)
2.7g
}
using MIL-HDBK 217F RSZ types
Detailed Information see
RSZ/P types
2.6g
1210 x 103 hours
1688 x 103 hours
using MIL-HDBK 217F RSZ types
RSZ/P types
149 x 103 hours
418 x 103 hours
Application Notes chapter "MTBF"
Typical Characteristics
RSZ-xx3.3/P
RSZ-xx05/P
Efficiency / Load
Efficiency / Load
100
100
80
80
243.3
60
40
Efficiency %
Efficiency %
123.3
20
053.3
0%
40%
20%
60%
80%
100%
Total Output current (%)
RSZ-xx05
0% 20%
40%
60%
Total Output current (%)
80%
RSZ-xx14
100
80
80
1205
2412
60
2405
0% 20%
40%
60%
Total Output current (%)
40
80%
100%
1212
20
0
Efficiency %
20
2414
60
40
0505
Efficiency %
40
100%
Efficiency / Load
100
3.305
60
Efficiency %
0
Efficiency / Load
100
0
0505
20
RSZ-xx12
Efficiency / Load
80
1205
60
40
0
2405
0512
0%
40%
20%
60%
80%
0514
20
0
100%
1214
0%
20%
40%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Package Style and Pinning (mm)
10 PIN Single SMD Package
9.30
15.24
14.84
7.05
1.65
10
9.00
2.54x4
1 2
12.70
1.20
www.recom-international.com
4 5
8.60
10.00
Pin Connections
11.80
Pin #
Recommended Footprint Details
Bottom View
7
RECOM
RSZ-xxxx
xxxx
9.00
0.55
2.54
3rd angle
projection
10
7
Top View
1 2
4 5
1.20
07-May-2007
1.80
Function
1
–Vin
2
+Vin
4
-Vout
5
-Vout
7
+Vout
10
NC
NC= No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
27
Features
Unregulated
Converters
●
●
●
●
●
●
●
Dual Output from a Single Input Rail
Power Sharing on Output
Industry Standard Pinout
1kVDC & 2kVDC Isolation
Optional Continuous Short Circuit Protected
UL94V-0 Package Material
Efficiency to 85%
ECONOLINE
DC/DC-Converter
RB & RA
Series
Selection Guide
Part
Number
(2kV)
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
SIP 7
DIP 14
RB-xx1.8S
RA-xx1.8S (H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
555
70
RB-xx3.3S
RA-xx3.3S (H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RB-xx05S
RA-xx05S (H)
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RB-xx09S
RA-xx09S (H)
1.8, 3.3, 5, 9, 12, 15, 24
9
111
70-78
RB-xx12S
RA-xx12S (H)
1.8, 3.3, 5, 9, 12, 15, 24
12
84
78-80
RB-xx15S
RA-xx15S (H)
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-84
RB-xx24S
RA-xx24S (H)
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-85
RB-xx1.8D
RA-xx1.8D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±278
70
RB-xx3.3D
RA-xx3.3D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±152
70
RB-xx05D
RA-xx05D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±5
±100
70-78
RB-xx09D
RA-xx09D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±9
±56
76-79
RB-xx12D
RA-xx12D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±12
±42
78-82
RB-xx15D
RA-xx15D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±15
±33
80-84
RB-xx24D
RA-xx24D (H)
1.8, 3.3, 5, 9, 12, 15, 24
±24
±21
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RB-0505S/P, RB-0505S/HP
1 Watt
SIP7 & DIP14
Single & Dual
Output
80-84
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
(10% to 100% full load)
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
Single output types
Dual output types
Operating Frequency
20% max.
15% max.
10% max.
Derating-Graph
100mVp-p max.
±75mVp-p max.
(Ambient Temperature)
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
70% min. / 80% typ.
Single
101mW min. / 126mW typ. / 238mW max.
100
Dual
87mW min. / 130mW typ. / 228mW max.
80
Isolation Voltage
Rated Working Voltage
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
H-Suffix
H-Suffix
Isolation Capacitance
20pF min. / 75pF max.
Isolation Resistance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
Output Power (%)
No Load Power Consumption
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
1 Second
Continuous
-40°C to +85°C (see Graph)
continued on next page
28
July-2006
www.recom-international.com
ECONOLINE
RB & RA
Series
DC/DC-Converter
Specifications (Core Operating Area)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
Package Weight
MTBF (+25°C)
(+85°C)
}
95% RH
2.2g
2.6g
RB types
RA types
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
1012 x 103 hours
using MIL-HDBK 217F
151 x 103 hours
Typical Characteristics
RB/RA-xx05S
RB/RA-xx09S
RB/RA-xx12S
100
100
100
Efficiency / Load
Efficiency / Load
1205
3.305
80
0% 20%
40%
60%
Total Output current (%)
80%
20
0
100%
20.000
0505
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
15.000
-10.000
100%
80%
100%
80%
100%
60%
Deviation / Load
3.309
20.000
0509
5.000
-5.000
40%
20%
25.000
10.000
0.000
0%
Total Output current (%)
Deviation from Nominal (%)
3.305
Deviation from Nominal (%)
1209
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
0512
1212
10.000
5.000
0.000
-5.000
-10.000
3.312
0% 20%
40%
60%
Total Output current (%)
RB/RA-xx15S
RB/RA-xx05D
RB/RA-xx09D
100
100
100
Efficiency / Load
Efficiency / Load
80
60
0515
40
0
0%
40%
20%
60%
80%
Efficiency %
3.315
20
100%
40
40
0
0515
20.000
3.315
Deviation from Nominal (%)
-10.000
80%
100%
1215
0% 20%
40%
60%
Total Output current (%)
80%
www.recom-international.com
100%
15.000
0
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
Deviation / Load
3.305
20.000
0505
5.000
-5.000
3.309
25.000
10.000
0.000
1209
20
Deviation / Load
5.000
-5.000
0% 20%
40%
60%
Total Output current (%)
25.000
10.000
0.000
3.305
20
0509
80
60
Deviation / Load
25.000
20.000
1205
60
Total Output current (%)
15.000
0505
Efficiency %
1215
80
Efficiency / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
0
100%
25.000
15.000
Efficiency %
80%
20
Deviation / Load
Deviation / Load
25.000
Deviation from Nominal (%)
0% 20%
40%
60%
Total Output current (%)
3.312
40
3.309
Efficiency %
Efficiency %
Efficiency %
20
60
1209
40
1212
0512
80
60
0505
40
-10.000
0509
80
60
0
Efficiency / Load
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
3.309
0509
10.000
5.000
0.000
-5.000
-10.000
1209
0% 20%
40%
60%
Total Output current (%)
29
ECONOLINE
RB & RA
Series
DC/DC-Converter
Typical Characteristics
RB/RA-xx15D
RB/RA-xx12D
Efficiency / Load
Efficiency / Load
100
100
0512
1212
80
60
60
3.312
20
0%
40%
20%
20
0
100%
80%
60%
40%
20%
60%
80%
100%
80%
100%
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
0%
Total Output current (%)
Total Output current (%)
10.000
5.000
0.000
3.312
-5.000
-10.000
1215
40
Efficiency %
Efficiency %
40
0
3.315
0515
80
0% 20%
40%
60%
Total Output current (%)
0515
10.000
5.000
0.000
3.315
-5.000
-10.000
100%
80%
1215
15.000
0% 20%
40%
60%
Total Output current (%)
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
6.00
10.20
RECOM
RB-0505S
****
30
2.0
12.70
RECOM
RB-0505D
****
0.25
2.54
2.54
Top View
1 2
4 5 6
4 5 6
Pin Connections
Pin #
1.00 ø+0.15/–0
19.60
Bottom View
RECOM
RB-0505S
****
1 2
Recommended Footprint Details
1.27
Dual Output
0.51 typ.
0.51 typ.
4.10
Single Output
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
4
NC
–Vout
5
–Vout
Com
6
+Vout
+Vout
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
July-2006
www.recom-international.com
ECONOLINE
RB & RA
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
14 PIN DIP Package
19.90
10.00
7.10
3.25
Recommended Footprint Details
1.00 ø+0.15/–0
ø 0.51 typ.
1
14
Bottom View
11
Dual Output
RECOM
RA-0505S
****
RECOM
RA-0505D
****
7.62
15.24
2.0
Single Output
7
Pin #
2.54
9 8
2.54
Pin Connections
Top View
Single
Dual
1
–Vin
–Vin
7
NC
NC
8
–Vout
Com
9
+Vout
+Vout
11
NC
–Vout
14
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
31
Features
Unregulated
Converters
●
●
●
●
●
ECONOLINE
Micro Size SIP 6 Package
Industry Standard Pinout
3kVDC Isolation
Optional Continuous Short Circuit Protected
Efficiency to 85%
DC/DC-Converter
RBM
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RBM-xx1.8S
1.8, 3.3, 5, 9, 12, 15, 24
1.8
555
70
RBM-xx3.3S
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RBM-xx05S
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RBM-xx09S
1.8, 3.3, 5, 9, 12, 15, 24
9
111
76-79
RBM-xx12S
1.8, 3.3, 5, 9, 12, 15, 24
12
83
78-80
RBM-xx15S
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-84
RBM-xx24S
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-85
RBM-xx1.8D
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±278
70
RBM-xx3.3D
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±152
70
RBM-xx05D
1.8, 3.3, 5, 9, 12, 15, 24
±5
±100
74-78
RBM-xx09D
1.8, 3.3, 5, 9, 12, 15, 24
±9
±56
76-79
RBM-xx12D
1.8, 3.3, 5, 9, 12, 15, 24
±12
±41
80-82
RBM-xx15D
1.8, 3.3, 5, 9, 12, 15, 24
±15
±33
80-84
SIP 6 Micro Size Package
RBM-xx24D
1.8, 3.3, 5, 9, 12, 15, 24
±24
±21
80-84
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RBM-0505S/P, RBM-0505D/P
1 Watt
SIP 6 Micro
Size, Single &
Dual Output
EN-60950-1 Certified
EN-60601-1 Certified
Description
The RBM Micro Size DC/DC-Converter complements Recom’s industrial range of converters. This range is
widely used for pcb distributed power systems and combines small package size, high efficiency, 3kVDC
isolation and low output ripple.
The extended operating temperature range covering –40°C to +85°C is a standard feature. The full rated
power can be taken from a single pin of this dual output converter, provided this does not exceed 1 Watt.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
100mVp-p max.
Operating Frequency
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
(Ambient Temperature)
20% max.
15% max.
10% max.
100
50kHz min. / 100kHz typ. / 105kHz max.
Single
Dual
70% min. / 80% typ.
101mW min. / 126mW typ. / 220mW max.
87mW min. / 130mW typ. / 230mW max.
(tested for 1 second)
(long term isolation)
Isolation Capacitance
3000VDC min.
see Application Notes
20pF min. / 65pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
80
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
Derating-Graph
1.2%/1% of Vin typ.
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
1 Second
Continuous
-40°C to +85°C (see Graph)
continued on next page
32
July-2006
www.recom-international.com
ECONOLINE
RBM
Series
DC/DC-Converter
Specifications (Core Operating Area)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
}
1.3g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
using MIL-HDBK 217F
3
1005 x 10 hours
195 x 103 hours
Typical Characteristics
RBM-xx05S
Efficiency / Load
Efficiency / Load
1205
3.305
80
0% 20%
40%
60%
Total Output current (%)
80%
0
20.000
0505
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
15.000
-5.000
-10.000
100%
80
Efficiency %
0515
40
3.315
20
0%
40%
20%
60%
80%
0% 20%
40%
60%
Total Output current (%)
80%
0505
0.000
-5.000
-10.000
100%
1205
80%
100%
20.000
Deviation from Nominal (%)
3.315
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
www.recom-international.com
100%
15.000
3.305
-10.000
3.309
20
0
20.000
0505
5.000
-5.000
1209
0% 20%
40%
60%
Total Output current (%)
80%
100%
25.000
10.000
0.000
100%
Deviation / Load
25.000
0515
80%
0509
80
Deviation / Load
Deviation / Load
25.000
0% 20%
40%
60%
Total Output current (%)
Efficiency / Load
3.305
0% 20%
40%
60%
Total Output current (%)
3.312
100
40
0
1212
RBM-xx09D
40
20
0512
5.000
60
100%
100%
10.000
60
Total Output current (%)
-10.000
1209
15.000
Efficiency %
1215
60
-5.000
20.000
0509
100
80
0.000
3.309
Efficiency / Load
100
80%
60%
Deviation / Load
RBM-xx05D
Efficiency / Load
40%
20%
25.000
5.000
0.000
0%
Total Output current (%)
10.000
RBM-xx15S
20.000
0
100%
Deviation from Nominal (%)
3.305
Deviation from Nominal (%)
20.000
15.000
80%
25.000
15.000
0
0% 20%
40%
60%
Total Output current (%)
20
Deviation / Load
Deviation / Load
25.000
-10.000
3.309
20
100%
3.312
40
Deviation from Nominal (%)
0
60
Efficiency %
20
1212
0512
80
1209
40
Efficiency %
Efficiency %
0509
60
0505
40
Deviation from Nominal (%)
100
80
60
Efficiency %
Efficiency / Load
100
100
Deviation from Nominal (%)
RBM-xx12S
RBM-xx09S
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
3.309
0509
10.000
5.000
0.000
-5.000
-10.000
1209
0% 20%
40%
60%
Total Output current (%)
80%
100%
33
ECONOLINE
RBM
Series
DC/DC-Converter
Typical Characteristics
RBM-xx12D
RBM-xx15D
Efficiency / Load
Efficiency / Load
100
100
0512
1212
80
60
60
3.312
20
0%
40%
20%
20
0
100%
80%
60%
40%
20%
60%
80%
100%
80%
100%
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
0%
Total Output current (%)
Total Output current (%)
10.000
5.000
0.000
3.312
-5.000
-10.000
1215
40
Efficiency %
Efficiency %
40
0
3.315
0515
80
0% 20%
40%
60%
Total Output current (%)
0515
10.000
5.000
0.000
3.315
-5.000
-10.000
100%
80%
1215
15.000
0% 20%
40%
60%
Total Output current (%)
Package Style and Pinning (mm)
3rd angle
projection
6 PIN SIP Micro Size Package
6.00
7.70
RECOM
RBM-0505S
****
0.51 typ.
Recommended Footprint Details
1.27
Bottom View
1.9
12.70
0.25
2.54
2.54
34
RECOM
RBM-0505S
****
RECOM
RBM-0505D
****
4 5 6
Top View
1 2
4 5 6
Pin Connections
Pin #
1.00 ø+0.15/–0
16.55
Dual Output
1 2
0.51 typ.
4.10
Single Output
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
4
NC
–Vout
5
–Vout
Com
6
+Vout
+Vout
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
July-2006
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
Dual Output from a Single Input Rail
3kVDC & 4kVDC Isolation
Optional Continuous Short Circuit Protected
Custom Solutions Available
UL94V-0 Package Material
Efficiency to 84%
DC/DC-Converter
RJ & RG
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
DIP 14
4kV
(VDC)
(VDC)
(mA)
(%)
RJ-xx1.8S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
303
70
RJ-xx3.3S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RJ-xx05S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RJ-xx09S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
9
111
78-82
RJ-xx12S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
12
84
78-82
RJ-xx15S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
15
66
78-82
RJ-xx24S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-83
RG-xx1.8D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±152
70
RG-xx3.3D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±152
70
RG-xx05D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±5
±100
70-78
RG-xx09D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±9
±56
75-80
RG-xx12D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±12
±42
78-84
RG-xx15D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±15
±33
80-84
RG-xx24D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±24
±21
80-84
xx = Input Voltage
1 Watt
DIP14
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RJ-0505S/P, RG-0505D/HP
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
1.8V, 3.3V output types
20% max.
5V output type
15% max.
9V, 12V, 15V, 24V output types
10% max.
100mVp-p max.
57kHz min. / 90kHz typ. / 105kHz max.
Output Ripple and Noise (20MHz limited)
Operating Frequency
Efficiency at Full Load
(Ambient Temperature)
70% min. / 80% typ.
102mW min./180mW typ./260mW max.
Isolation Voltage
Rated Working Voltage
H-Suffix
H-Suffix
(tested for 1 second)
(long term isolation)
3000VDC min.
see Application Notes.
(tested for 1 second)
(long term isolation)
4000VDC min.
see Application Notes
Isolation Capacitance
20pF min. / 65pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
100
80
Output Power (%)
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
95% RH
Package Weight
2.5g
continued on next page
www.recom-international.com
July-2006
35
ECONOLINE
RJ & RG
Series
DC/DC-Converter
Specifications (Core Operating Area)
MTBF (+25°C)
}
using MIL-HDBK 217F RJ types
RG types
992 x 103 hours
1012 x 103 hours
using MIL-HDBK 217F RJ types
RG types
145 x 103 hours
151 x 103 hours
Detailed Information see
Application Notes chapter "MTBF"
(+85°C)
Typical Characteristics
RJ-xx09S
RJ-xx05S
Efficiency / Load
Efficiency / Load
100
80%
100%
20.000
0505
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
15.000
0.000
-5.000
-10.000
100%
80
0515
40
3.315
20
40%
20%
60%
80%
Efficiency %
Efficiency %
1209
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
100%
-5.000
-10.000
1205
40
3.305
20
20.000
Deviation from Nominal (%)
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
1209
3.309
20
0
0% 20%
40%
60%
Total Output current (%)
-10.000
80%
100%
80%
100%
Deviation / Load
3.305
20.000
0505
5.000
-5.000
100%
25.000
10.000
0.000
80%
0509
80
Deviation / Load
3.315
0% 20%
40%
60%
Total Output current (%)
100
0505
25.000
0515
3.312
RG-xx09D
40
Deviation / Load
25.000
1212
Efficiency / Load
60
Total Output current (%)
0512
5.000
0.000
60
0
100%
10.000
Efficiency %
60
Deviation from Nominal (%)
20.000
0509
100
80
36
3.309
RG-xx05D
1215
80%
60%
Deviation / Load
Efficiency / Load
100
40%
20%
25.000
5.000
RJ-xx15S
0%
0%
Total Output current (%)
10.000
Efficiency / Load
-10.000
0
100%
Deviation from Nominal (%)
3.305
10.000
-5.000
80%
20
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
0.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
20.000
Efficiency %
0
3.312
40
3.309
20
Deviation / Load
25.000
15.000
60
Deviation from Nominal (%)
Efficiency %
Efficiency %
0% 20%
40%
60%
Total Output current (%)
1212
0512
80
1209
40
20
0
0509
60
0505
40
-10.000
100
80
60
0
Efficiency / Load
100
1205
3.305
80
RJ-xx12S
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
3.309
0509
10.000
5.000
0.000
-5.000
-10.000
1209
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
ECONOLINE
RJ & RG
Series
DC/DC-Converter
Typical Characteristics
RG-xx15D
RG-xx12D
Efficiency / Load
Efficiency / Load
100
100
0512
1212
80
60
60
3.312
20
0%
40%
20%
80%
60%
20
0
100%
40%
20%
60%
80%
100%
80%
100%
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
0%
Total Output current (%)
Total Output current (%)
10.000
5.000
0.000
3.312
-5.000
-10.000
1215
40
Efficiency %
Efficiency %
40
0
3.315
0515
80
0% 20%
40%
60%
Total Output current (%)
80%
100%
1215
15.000
0515
10.000
5.000
0.000
3.315
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
Package Style and Pinning (mm), 14 PIN DIP Package
3rd angle
projection
Single Output
Dual Output
19.90
19.90
10.00
10.00
7.10
7.10
3.25
3.25
7.70
15.24
2.0
7.70
15.24
2.0
Recommended Footprint Details
Recommended Footprint Details
1.00 ø+0.15/–0
ø 0.51 typ.
1
14
Bottom View
10
7
2.54
1
14
8
2.54
1.00 ø+0.15/–0
ø 0.51 typ.
Bottom View
7
2.54
10 9 8
Top View
Top View
2.54
Pin Connections
Dual Output
Single Output
RECOM
RJ-0505S
****
RECOM
RG-0505D
****
Pin #
RJ
RG
1
–Vin
–Vin
7
NC
NC
8
+Vout
+Vout
9
No Pin
Com
10
–Vout
–Vout
14
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
37
Features
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
Safety standards and approval:
EN 60950 certified, rated for 250VAC
(LVD test report)
Optional Continuous Short Circuit Protected
3kVDC & 4kVDC Isolation
Custom Solutions Available
UL94V-0 Package Material
Efficiency to 84%
DC/DC-Converter
RK & RH
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(4kV)
(VDC)
(VDC)
(mA)
(%)
RK-xx1.8S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
1.8
555
70
RK-xx3.3S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
3.3
303
75
RK-xx05S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
5
200
70-78
RK-xx09S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
9
111
70-80
RK-xx12S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
12
84
78-82
RK-xx15S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
15
66
80-82
RK-xx24S
(H)
1.8, 3.3, 5, 9, 12, 15, 24
24
42
74-83
RH-xx1.8D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±1.8
±278
70
RH-xx3.3D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±3.3
±152
70
RH-xx05D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±5
±100
74-78
RH-xx09D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±9
±56
76-79
RH-xx12D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±12
±42
78-84
RH-xx15D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±15
±33
80-84
SIP 7
RH-xx24D
(H)
1.8, 3.3, 5, 9, 12, 15, 24
±24
±21
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RK-0505S/P, RK-0505S/HP
80-84
1 Watt
SIP7
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
1.8V, 3.3V output types
20% max.
5V output type
15% max.
9V, 12V, 15V, 24V output types
10% max.
Single output types
100mVp-p max.
Dual output types
±75mVp-p max.
RK types
50kHz min. / 100kHz typ. / 105kHz max.
RH types
57kHz min. / 100kHz typ. / 105kHz max.
Operating Frequency
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
RK types
RH types
H-Suffix
H-Suffix
3000VDC min.
see Application Notes
4000VDC min.
see Application Notes
20pF min. / 75pF max.
20pF min. / 65pF max.
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
(Ambient Temperature)
70% min. / 80% typ.
101mW min. / 126mW typ. / 238mW max.
87mW min. / 130mW typ. / 228mW max.
(tested for 1 second)
(long term isolation)
(tested for 1 second)
(long term isolation)
RK types
RH types
Isolation Resistance
Derating-Graph
1 Second
Continuous
100
80
Output Power (%)
Output Ripple and Noise (20MHz limited)
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
continued on next page
38
July-2006
www.recom-international.com
ECONOLINE
RK & RH
Series
DC/DC-Converter
Specifications (Core Operating Area)
Relative Humidity
Package Weight
H-Suffix
MTBF (+25°C)
}
using MIL-HDBK 217F RK types
RH types
95% RH
2.6g
2.8g
992 x 103 hours
1012 x 103 hours
using MIL-HDBK 217F RK types
RH types
145 x 103 hours
151 x 103 hours
Detailed Information see
Application Notes chapter "MTBF"
(+85°C)
Typical Characteristics
RK-xx05S
1205
3.305
80
80%
Deviation / Load
20.000
0505
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
-5.000
-10.000
RK-xx15S
20.000
0509
1209
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
80
40
Efficiency %
0515
3.315
20
0%
40%
20%
60%
80%
0.000
-5.000
-10.000
0505
1205
3.305
20
0% 20%
40%
60%
Total Output current (%)
80%
100%
20.000
Deviation from Nominal (%)
3.315
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
www.recom-international.com
100%
15.000
-10.000
0509
1209
3.309
0
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
Deviation / Load
3.305
20.000
0505
5.000
-5.000
100%
25.000
10.000
0.000
80%
20
Deviation / Load
25.000
0515
0% 20%
40%
60%
Total Output current (%)
80
40
Deviation / Load
25.000
3.312
Efficiency / Load
40
Total Output current (%)
1212
100
60
0
0512
RH-xx09D
60
100%
100%
5.000
Efficiency %
1215
80%
10.000
RH-xx05D
60
Efficiency %
3.309
100
80
60%
Deviation / Load
Efficiency / Load
100
40%
20%
25.000
5.000
0.000
0%
Total Output current (%)
10.000
Efficiency / Load
Deviation from Nominal (%)
0
100%
Deviation from Nominal (%)
3.305
10.000
-10.000
80%
20
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
-5.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
0.000
3.309
Efficiency %
0
3.312
40
20
100%
25.000
20.000
60
Deviation from Nominal (%)
Efficiency %
Efficiency %
0% 20%
40%
60%
Total Output current (%)
1212
0512
80
1209
40
20
15.000
0509
60
0505
40
0
100
80
60
-10.000
Efficiency / Load
100
100
0
RK-xx12S
RK-xx09S
Efficiency / Load
Efficiency / Load
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
3.309
0509
10.000
5.000
0.000
-5.000
-10.000
1209
0% 20%
40%
60%
Total Output current (%)
39
ECONOLINE
RK & RH
Series
DC/DC-Converter
Typical Characteristics
RH-xx12D
RH-xx15D
Efficiency / Load
Efficiency / Load
100
0512
1212
80
100
60
20
0
1215
40
Efficiency %
Efficiency %
60
3.312
40
0%
40%
20%
80%
60%
100%
20
0
0%
Total Output current (%)
60%
80%
100%
80%
100%
Deviation / Load
Deviation / Load
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
40%
20%
Total Output current (%)
25.000
10.000
5.000
0.000
3.312
-5.000
-10.000
3.315
0515
80
0% 20%
40%
60%
Total Output current (%)
80%
1215
15.000
0515
10.000
5.000
0.000
3.315
-5.000
-10.000
100%
0% 20%
40%
60%
Total Output current (%)
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
( Suffix H )
6.00
10.20
RECOM
RK-xxxxS
****
7.05
RECOM
RK-xxxxS
****
0.51 typ.
1 2
0.51 typ.
4.10
5
RECOM
RH-xxxxD
****
1 2
7
5 6 7
Recommended Footprint Details
1.00 ø+0.15/–0
19.60
1.27
Bottom View
2.0
15.24
0.25
for RH-types
2.54
2.54
Top View
Recommended Footprint Details
( Suffix H )
( Suffix H )
1.00 ø+0.15/–0
19.65
40
1.27
Bottom View
2.0
15.24
0.25
for RH-types
2.54
2.54
Pin Connections
RK-xxxxS
Pin Connections
RH-xxxxD
Pin #
Pin #
Dual
1
+Vin
1
+Vin
2
–Vin
2
–Vin
5
–Vout
5
–Vout
7
+Vout
6
Com
7
+Vout
Single
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
July-2006
www.recom-international.com
Features
●
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
Safety standards and approvals:
EN 60950 certified, rated for
250VAC (LVD test report)
UL-60950-1 / CSA C22.2 certified
5.2kVDC Isolation
Optional Continuous Short Circuit Protected
Pin Compatible with RH & RK Series,
SIP DC-DC Converters
UL94V-0 Package Material
Efficiency to 82%
DC/DC-Converter
RP
Series
1 Watt
SIP 7
Single & Dual
Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RP-xx3.3S
5, 9, 12, 15, 24
3.3
303
70
RP-xx05S
3.3, 5, 9, 12, 15, 24
5
200
70-72
RP-xx09S
3.3, 5, 9, 12, 15, 24
9
111
75
RP-xx12S
3.3, 5, 9, 12, 15, 24
12
84
75-78
RP-xx15S
3.3, 5, 9, 12, 15, 24
15
66
80
RP-xx24S
3.3, 5, 9, 12, 15, 24
24
42
80
RP-xx3.3D
5, 9, 12, 15, 24
±3.3
±152
70
RP-xx05D
3.3, 5, 9, 12, 15, 24
±5
±100
74-76
RP-xx09D
3.3, 5, 9, 12, 15, 24
±9
±56
75
RP-xx12D
3.3, 5, 9, 12, 15, 24
±12
±42
79-82
RP-xx15D
3.3, 5, 9, 12, 15, 24
±15
±33
80-82
SIP 7
RP-xx24D
3.3, 5, 9, 12, 15, 24
±24
±21
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RP-0505S/P, RP-0505S/P
80
EN-60950-1 Certified
UL-60950-1 Certified
EN-60601-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
Operating Frequency
70% min. / 80% typ.
No Load Power Consumption
120mW min. / 156mW typ. / 460mW max.
(tested for 1 second)
(long term isolation)
5200VDC min.
see Application Notes
Isolation Capacitance
20 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
(+85°C)
100
80
4pF min. / 10pF max.
Isolation Resistance
MTBF (+25°C)
(Ambient Temperature)
57kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
Derating-Graph
100mVp-p max.
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
2.4g
}
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
using MIL-HDBK 217F
928 x 103 hours
using MIL-HDBK 217F
150 x 103 hours
July-2006
41
ECONOLINE
RP
Series
DC/DC-Converter
Typical Characteristics
RP-xx12S
RP-xx05S
Efficiency / Load
100
40
40
40
0%
40%
20%
80%
60%
100%
20
0
0% 20%
40%
60%
Total Output current (%)
80%
5.000
0.000
1205
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
5.000
0.000
1215
-5.000
-10.000
RP-xx15D
Efficiency / Load
100
0505
Efficiency %
40
20
40%
60%
80%
0512
80
60
1212
60
40
40
20
0
100%
0%
40%
20%
60%
80%
Deviation / Load
20.000
Deviation from Nominal (%)
5.000
1205
80%
100%
15.000
-10.000
60%
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
Deviation / Load
20.000
0512
5.000
-5.000
40%
20%
25.000
10.000
0.000
0%
Total Output current (%)
Deviation / Load
10.000
0% 20%
40%
60%
Total Output current (%)
0
100%
25.000
0505
1215
20
Total Output current (%)
25.000
0515
80
60
Total Output current (%)
-10.000
80%
0515
10.000
Efficiency %
80
-5.000
0% 20%
40%
60%
Total Output current (%)
100
20%
100%
15.000
RP-xx12D
Efficiency / Load
0%
80%
Efficiency / Load
100
0.000
1212
-5.000
RP-xx05D
60%
20.000
10.000
-10.000
40%
20%
Deviation / Load
0512
15.000
100%
0%
Total Output current (%)
Deviation from Nominal (%)
Deviation from Nominal (%)
1205
-5.000
0
100%
25.000
20.000
0505
0.000
20.000
80%
Deviation / Load
5.000
15.000
60%
1215
20
Total Output current (%)
10.000
0
40%
20%
25.000
15.000
-10.000
0%
Deviation from Nominal (%)
0
Efficiency %
60
20
0515
80
60
20.000
Deviation from Nominal (%)
1212
60
Deviation / Load
Efficiency %
0512
80
Efficiency %
Efficiency %
1205
25.000
Deviation from Nominal (%)
100
100
Total Output current (%)
42
Efficiency / Load
Efficiency / Load
0505
80
RP-xx15S
1212
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
0515
10.000
5.000
0.000
-5.000
-10.000
1215
www.recom-international.com
ECONOLINE
RP
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
7.05
10.20
RECOM
RP-xxxxD
****
Dual Output
RECOM
RP-xxxxS
****
RECOM
RP-xxxxD
****
0.51 typ.
1 2
0.51 typ.
4.10
Single Output
5
1 2
7
5 6 7
Pin Connections
Recommended Footprint Details
19.65
1.27
2.0
Bottom View
15.24
www.recom-international.com
0.25
1.00 ø+0.15/–0
2.54
2.54
Top View
July-2006
Pin #
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
5
–Vout
–Vout
6
No Pin
Com
7
+Vout
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
43
Features
Unregulated
Converters
●
●
●
●
●
ECONOLINE
EN 60950 certified, rated for 250VAC
UL-60950-1 / CSA C22.2 certified
5.2kVDC Isolation for 1 Minute
Optional Continuous Short Circuit Protected
Wide Temperature Performance at
full 1 Watt Load, –40°C to +85°C
2 Chamber Transformer System
UL94V-0 Package Material
Efficiency to 80%
●
●
●
DC/DC-Converter
RxxPxxS_D
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
(VDC)
(VDC)
(mA)
(%)
RxxP3.3S
5, 9, 12, 15, 24
3.3
303
70
RxxP05S
5, 9, 12, 15, 24
5
200
70-75
RxxP09S
5, 9, 12, 15, 24
9
111
70-75
RxxP12S
5, 9, 12, 15, 24
12
84
70-75
RxxP15S
5, 9, 12, 15, 24
15
66
75-80
RxxP3.3D
5, 9, 12, 15, 24
±3.3
±151
70
RxxP05D
5, 9, 12, 15, 24
±5
±100
70-75
RxxP09D
5, 9, 12, 15, 24
±9
±55
70-75
RxxP12D
5, 9, 12, 15, 24
±12
±41
70-75
SIP 7
1 Watt
SIP 7
Single & Dual
Output
Efficiency
RxxP15D
5, 9, 12, 15, 24
±15
±33
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R05P05S/P, R05P05D/P
75-80
Description
The RxxPxxS_D Series of DC/DC Converters are fully certified to EN 60950/ UL-60950-1 and CSA C22.2.
This makes them ideal for all telecom and safety applications where approved isolation is required.
EN-60950-1 Certified
UL-60950-1 Certified
EN-60601-1 Certified
Specifications
(measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
3.3, 5V output types
other output types
15% max.
10% max.
Output Ripple and Noise (20MHz BW)
Operating Frequency
65% min. / 75% typ.
No Load Power Consumption
148mW min. / 220mW typ. / 355mW max.
(tested for 1 minute)
(long term isolation)
4pF min. / 10pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
44
80
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
95% RH
Package Weight
}
100
5200VDC min.
see Application Notes
Isolation Capacitance
MTBF (+25°C)
(+85°C)
(Ambient Temperature)
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
Derating-Graph
200mVp-p max.
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
4.3g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
using MIL-HDBK 217F
July-2006
3
2974 x 10 hours
728 x 103 hours
www.recom-international.com
ECONOLINE
RxxPxxS_D
Series
DC/DC-Converter
Typical Characteristics, Tolerance Envelope
RxxP12/15S
RxxP05/09S
Efficiency / Load
Efficiency / Load
100
100
R05P05S
80
R05P09S
R12P05S
40
Efficiency %
Efficiency %
40
R12P09S
20
0%
20%
40%
60%
80%
100%
0
Deviation / Load
R12P05D
20.000
R05P09S
R05P05S
10.000
5.000
0.000
-5.000
60%
80%
100%
R12P05S
0% 20%
40%
60%
Total Output current (%)
80%
100%
R24P12S
R12P12S
15.000
10.000
5.000
0.000
R24P15S
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
RxxP12/15D
RxxP05/09D
Efficiency / Load
Efficiency / Load
100
100
R05P05D
80
R05P09D
R12P12D
80
R24P12D
60
60
R12P09D
40
Efficiency %
40
Efficiency %
40%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
R12P05D
20
0%
20%
40%
60%
80%
100%
R24P15D
20
0
0%
20%
40%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
R12P09D
15.000
20.000
R05P09D
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
20%
25.000
15.000
R05P05D
10.000
5.000
0.000
R12P05D
-5.000
-10.000
0%
Total Output current (%)
25.000
0
R24P12S
20
Total Output current (%)
-10.000
R24P15S
60
60
0
R12P12S
80
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
R12P12D
R24P12D
10.000
5.000
0.000
-5.000
-10.000
July-2006
R24P15D
0% 20%
40%
60%
Total Output current (%)
80%
100%
45
ECONOLINE
RxxPxxS_D
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
9.80
12.50
RECOM
R05P05D
****
4.1
0.51
1 2
0.50
Recommended Footprint Details
Bottom View
1.00ø+0.15/–0
2.54
19.50
0.50
2.40
1.90
46
Dual Output
Single Output
RECOM
R05P05D
****
RECOM
R05P05S
****
1 2
5 6 7
5
7
Pin Connections
Pin #
1
2
5
6
7
Single
+Vin
-Vin
–Vout
No Pin
+Vout
Dual
+Vin
–Vin
–Vout
Com
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
15.24
2.54
Top View
July-2006
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
●
●
●
●
ECONOLINE
Twin Independent Outputs
Output/Output Isolation 1kVDC
Power Sharing on Outputs
Input/Output Isolation 1kVDC
No Heatsink Required
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
No External Components Required
Custom Solutions Available
Efficiency to 84%
DC/DC-Converter
RU
Series
1 Watt
SIP7
Isolated
Dual Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(V1VDC)
(V2VDC)
(mA)
(%)
RU-xx1.81.8
1.8, 3.3, 5, 9, 12, 24
1.8
1.8
278/278
70
RU-xx3.33.3
1.8, 3.3, 5, 9, 12, 24
3.3
3.3
152/152
70
RU-xx053.3
1.8, 3.3, 5, 9, 12, 24
5
3.3
100/152
70
RU-xx0505
1.8, 3.3, 5, 9, 12, 24
5
5
100/100
70-78
RU-xx0509
1.8, 3.3, 5, 9, 12, 24
5
9
100/55
75
RU-xx0512
1.8, 3.3, 5, 9, 12, 24
5
12
100/42
75
RU-xx0515
1.8, 3.3, 5, 9, 12, 24
5
15
100/33
78
RU-xx0909
1.8, 3.3, 5, 9, 12, 24
9
9
55/55
75-80
RU-xx1212
1.8, 3.3, 5, 9, 12, 24
12
12
42/42
78-80
RU-xx1515
1.8, 3.3, 5, 9, 12, 24
15
15
33/33
80-82
21/21
80-84
SIP 7
RU-xx2424
1.8, 3.3, 5, 9, 12, 24
24
24
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RU-050505/P
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
(10% to 100% full load)
1.8V, 3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
50kHz min. / 100kHz typ. / 105kHz max.
Efficiency at Full Load
87mW min. / 130mW typ. / 220mW max.
1)
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
100
20pF min. / 94pF max.
80
Isolation Resistance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
1)
}
2.7g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
using MIL-HDBK 217F
Output Power (%)
1)
Isolation Capacitance
MTBF (+25°C)
(+85°C)
(Ambient Temperature)
70% min. / 80% typ.
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
75mVp-p max.
Operating Frequency
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
3
1012 x 10 hours
151 x 103 hours
Input/Output and Output V1/Output V2
www.recom-international.com
July-2006
47
ECONOLINE
RU
Series
DC/DC-Converter
Typical Characteristics
RU-xx0909
RU-xx0505
Efficiency / Load
Efficiency / Load
100
100
050505
120505
60
60
40
40
3.30505
20
0
0% 20%
40%
60%
Total Output current (%)
80%
3.30909
20
0
0% 20%
40%
60%
Total Output current (%)
25.000
3.30505
20.000
050505
Deviation from Nominal (%)
20.000
15.000
10.000
5.000
0.000
120505
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
10.000
5.000
0.000
120909
-5.000
-10.000
100%
0% 20%
40%
60%
Total Output current (%)
Efficiency / Load
121212
80
051212
Efficiency %
Efficiency %
0%
20%
40%
60%
80%
20
0
100%
40%
20%
60%
80%
100%
Deviation / Load
Deviation / Load
25.000
25.000
051212
20.000
121212
Deviation from Nominal (%)
Deviation from Nominal (%)
0%
Total Output current (%)
Total Output current (%)
48
121515
40
20
10.000
5.000
-10.000
3.31515
60
3.31212
40
-5.000
051515
80
60
0.000
100%
100
100
20.000
80%
RU-xx1515
Efficiency / Load
15.000
050909
3.30909
15.000
RU-xx1212
0
100%
80%
Deviation / Load
Deviation / Load
-10.000
120909
100%
25.000
Deviation from Nominal (%)
050909
80
Efficiency %
Efficiency %
80
3.31212
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
121515
051515
10.000
5.000
0.000
-5.000
-10.000
July-2006
3.31515
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
RU
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
6.00
10.20
RECOM
RU-050505
****
RECOM
RU-050505
****
0.51 typ.
1 2
0.51 typ.
4.10
Recommended Footprint Details
19.60
1.27
2.0
Bottom View
15.24
0.25
Pin Connections
1.00 ø+0.15/–0
Pin #
2.54
1
2.54
Top View
4 5 6 7
Single
+Vin
2
–Vin
4
+Vout 1
5
–Vout 1
6
+Vout 2
7
–Vout 2
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
49
Features
Regulated
Converters
●
●
●
●
●
●
●
ECONOLINE
2:1 Wide Range Voltage Input
1kVDC, 2kVD & 3kVDC Isolation
UL94V-0 Package Material
Continuous Short Circuit Protection
with Current Foldback
Low Noise
No External Capacitor needed
Efficiency to 83%
DC/DC-Converter
RSO
Series
Selection Guide 5V, 12V, 24V and 48V Input Types
Part Number
Input
Voltage Range
Rated Output
Voltageat
Output Current
Full Load
Efficiency
typ.
Capacitive
Load max.
SIP8
(VDC)
(VDC)
(mA)
(%)
µF
RSO-053.3S (H2/H3)
4.5 - 9
3.3
300
68
470
RSO-0505S (H2/H3)
4.5 - 9
5
200
73
470
RSO-0509S (H2/H3)
4.5 - 9
9
111
74
220
RSO-0512S (H2/H3)
4.5 - 9
12
83
75
100
RSO-0515S (H2/H3)
4.5 - 9
15
67
75
47
RSO-123.3S (H2/H3)
9 - 18
3.3
300
69
470
RSO-1205S (H2/H3)
9 - 18
5
200
75
470
RSO-1209S (H2/H3)
9 - 18
9
111
78
220
RSO-1212S (H2/H3)
9 - 18
12
83
80
100
RSO-1215S (H2/H3)
9 - 18
15
67
80
47
RSO-243.3S (H2/H3)
18 - 36
3.3
300
70
470
RSO-2405S (H2/H3)
18 - 36
5
200
78
470
RSO-2409S (H2/H3)
18 - 36
9
111
81
220
RSO-2412S (H2/H3)
18 - 36
12
83
83
100
RSO-2415S (H2/H3)
18 - 36
15
67
83
47
RSO-483.3S (H2/H3)
36 - 72
3.3
300
70
470
RSO-4805S (H2/H3)
36 - 72
5
200
75
470
RSO-4809S (H2/H3)
36 - 72
9
111
78
220
RSO-4812S (H2/H3)
36 - 72
12
83
80
100
RSO-4815S (H2/H3)
36 - 72
15
67
80
47
RSO-053.3D (H2/H3)
4.5 - 9
±3.3
±150
71
±220
RSO-0505D (H2/H3)
4.5 - 9
±5
±100
74
±220
RSO-0509D (H2/H3)
4.5 - 9
±9
±56
75
±100
RSO-0512D (H2/H3)
4.5 - 9
±12
±42
76
±47
RSO-0515D (H2/H3)
4.5 - 9
±15
±34
76
±22
RSO-123.3D (H2/H3)
9 - 18
±3.3
±150
76
±220
RSO-1205D (H2/H3)
9 - 18
±5
±100
79
±220
RSO-1209D (H2/H3)
9 - 18
±9
±56
80
±100
RSO-1212D (H2/H3)
9 - 18
±12
±42
81
±47
RSO-1215D (H2/H3)
9 - 18
±15
±34
81
±22
RSO-243.3D (H2/H3)
18 - 36
±3.3
±150
74
±220
RSO-2405D (H2/H3)
18 - 36
±5
±100
77
±220
RSO-2409D (H2/H3)
18 - 36
±9
±56
78
±100
RSO-2412D (H2/H3)
18 - 36
±12
±42
80
±47
RSO-2415D (H2/H3)
18 - 36
±15
±34
80
±22
RSO-483.3D (H2/H3)
36 - 72
±3.3
±150
70
±220
RSO-4805D (H2/H3)
36 - 72
±5
±100
75
±220
RSO-4809D (H2/H3)
36 - 72
±9
±56
78
±100
RSO-4812D (H2/H3)
36 - 72
±12
±42
80
±47
RSO-4815D (H2/H3)
36 - 72
±15
±34
80
±22
50
January-2007
1 Watt
SIP8 Isolated
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
(Suffix H2/H3)
www.recom-international.com
RSO
Series
ECONOLINE
DC/DC-Converter
Description
High power-density, an industrial temperature range of -40°C to +85°C and extra features like Remote-OnOff-control are just some of the characteristics of this converter, ideal for highly sophisticated industrialdesigns. The RSO series is available with isolation of 2kV or 3kV by chosing option "/H2" or "/H3" in which
case it is also ideal for medical applications which additionally require EN-60601-1 certification.
Specifications (Core Operating Area)
Input Voltage Range
2:1
Output Voltage Accuracy
±2% typ.
Line Voltage Regulation
±0.2% max.
Load Voltage Regulation (10% to 100% full load)
±0.4% max.
Output Ripple and Noise (20MHz limited)
Operating Frequency
up to 83%
50mW min. / 139mW typ. / 250mW max.
(tested for 1 second)
1000VDC min.
H2
2000VDC min.
H3
3000VDC min.
(long term isolation)
see Application Notes
Single
10pF min. / 40pF typ. / 60pF max.
Single
5pF min. / 30pF typ. / 60pF max.
Dual
120pF min. / 170pF typ. / 250pF max.
Dual
5pF min. / 30pF typ. / 60pF max.
>1GΩ min.
Rated Working Voltage
Isolation Capacitance (1000V version)
Isolation Capacitance (H2 and H3)
Isolation Capacitance (1000V version)
Isolation Capacitance (H2 and H3)
Isolation Resistance
Short Circuit Protection
100
80
Output Power (%)
No Load Power Consumption
Isolation Voltage
60
Safe Operating Area
40
30
20
0
-40
0
50
85
Operating Temperature °C
Continuous
Operating Temperature Range (free air convection)
100
150
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
(+85°C)
(Ambient Temperature)
100kHz typ.
Efficiency at Full Load
MTBF (+25°C)
Derating-Graph
50mVp-p max.
4.6g
}
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
1685 x 10 hours
using MIL-HDBK 217F
254 x 103 hours
Typical Characteristics
RSO-24xx
RSO-types
Efficiency / Load
100
2412
80
2
2409
1.5
2405
Efficiency %
40
2415
20
0
Output Power (W)
60
0%
20%
40%
60%
80%
100%
Total Output current (%)
www.recom-international.com
1
0.75
0.5
0
4.5 5
6
7
8
9
Input Voltage (V)
January-2007
51
ECONOLINE
RSO
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
8 PIN SIP Package
9.20
11.10
3.80
RECOM
RSO-xxxx
****
0.50±0.05
Single Output
Dual Output
RECOM
RSO-xxxx
****
RECOM
RSO-xxxxD
****
1 2 3
0.50±0.05
Recommended Footprint Details
21.80
0.32
Bottom View
3.20
2.0
2.54
5 6 7 8
Pin Connections
1.0ø+0.15/–0
2.54
1 2 3
5 6 7 8
Top View
Pin #
Single
1
–Vin
Dual
–Vin
2
+Vin
+Vin
3
CTRL
CTRL
5
NC
NC
6
+Vout
+Vout
7
–Vout
Com
8
NC*
–Vout
NC = No Connection
NC* = NC, but no external Connection allowed.
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Control Pin Input Current:
Voltage Set Point Accuracy
with external input/output
capacitors refer to
recommended test circuit:
Control Pin (CTRL) Input
Current, control voltage
applied via 1K resistor,
output voltage must
reduce to 0V:
+Vin
10mA
typ. ± 1%
max. ±2%
Pin 3 (CTRL)
This pin provides an Off function which puts the converter into a low power mode. When the pin is ‘high’ the
converter is OFF and when the pin is high ‘Z’ the converter is ON. There is no allowed low state for this pin. Voltage
to be applied via a limiting resistor with a recommended value of 1K for RSO-05xx; 3.3K for RSO-12xx; RSO-24xx
and 10K for RSO-48xx.
Pin 5 (NC)
This pin is used internally and must have no external connection.
typ. 3mA
max. 6mA
Lin
Pin 8 (NC*)
No external connection allowed.
2
6
DC/DC
Converter
-Vin
52
1
+Vout
Cout
7
Lin
RS0- types
4.7µH ~ 100µH
Cout
RS0- types
22µF ~ 100µF/25V
January-2007
use low ESR capacitor Cout and input inductor Lin
to reduce output ripple and input inrush current.
0V
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
●
Controllable Output
1kVDC Isolation
No Heatsink Required
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
No External Components
Fully Encapsulated
Efficiency to 70%
ECONOLINE
DC/DC-Converter
RY & RX
Series
Selection Guide
Part
Number
Input
Output
Output
Efficiency
Voltage
Voltage
Current
(VDC)
(VDC)
(mA)
(%)
5
180
58-60
SIP 7
DIP 14
RY-xx05S
RX-xx05S
5, 9, 12, 15, 24
RY-xx09S
RX-xx09S
5, 9, 12, 15, 24
9
111
56-62
RY-xx12S
RX-xx12S
5, 9, 12, 15, 24
12
84
60-66
RY-xx15S
RX-xx15S
5, 9, 12, 15, 24
15
66
60-66
RY-xx24S
RX-xx24S
5, 9, 12, 15, 24
24
42
60-68
RY-xx05D
RX-xx05D
5, 9, 12, 15, 24
±5
±100
50-58
RY-xx09D
RX-xx09D
5, 9, 12, 15, 24
±9
±55
52-60
RY-xx12D
RX-xx12D
5, 9, 12, 15, 24
±12
±42
58-68
RY-xx15D
RX-xx15D
5, 9, 12, 15, 24
±15
±33
62-68
RY-xx24D
RX-xx24D
5, 9, 12, 15, 24
±24
±21
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RY-0505S/P, RX-0505S/P
1 Watt
SIP7 & DIP14
Single & Dual
Output
64-70
Specifications (Core Operating Area)
Input Voltage Range
±5%
Output Voltage Accuracy
±5%
Line Voltage Regulation
±1% max.
Load Voltage Regulation (10% to 100% full load)
±1% max.
Output Ripple and Noise (20MHz limited)
100mVp-p max.
30kHz min. / 50kHz typ. / 88kHz max.
Efficiency at Full Load
No Load Power Consumption
Single
Dual
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
54% min. / 60% typ.
171mW min. / 232mW typ. / 390mW max.
188mW min. / 264mW typ. / 350mW max.
(tested for 1 second)
(long term isolation)
Single output types
Dual output types
1000VDC min.
see Application Notes
30pF min. / 150pF max.
40pF min. / 72pF max.
Isolation Resistance
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
Relative Humidity
Package Weight
MTBF (+25°C)
}
Application Notes chapter "MTBF"
(+70°C)
100
1 Second
Continuous
80
-55°C to +125°C
RY Single & Dual output types
RX Single output types
RX Dual output types
using MIL-HDBK 217F RY types
Detailed Information see
RX types
95% RH
2.8g
2.9g
2.7g
924 x 103 hours
944 x 103 hours
60
40
30
20
0
Safe Operating Area
-40
0
50
85 100
70
150
Operating Temperature °C
135 x 103 hours
130 x 103 hours
using MIL-HDBK 217F RY types
RX types
www.recom-international.com
(Ambient Temperature)
10 GΩ min.
-40°C to +70°C (see Graph)
Storage Temperature Range
Derating-Graph
Output Power (%)
Operating Frequency
July-2006
53
ECONOLINE
RY & RX
Series
DC/DC-Converter
Typical Applications
Flash PROM Programming Voltage Control
Vcc
Normal Isolated Regulated Output
Vcc
1
6
RY-XX12
2
GND
CTRL
5
4
0V
1
Vout = 12V, TTL = 0V
Vout = 1.2V, TTL = 1V
GND
5
TTL Input
NC
2N2219, BC107, ZTX451
or Similar Transistors capable of
Sinking 50mA Continuous Current
0V
Vout
CTRL
4
1kW
6
RY-XX12
2
0V
Typical Characteristics
RY/RX-xx09S
RY/RX-xx05S
Efficiency / Load
Efficiency / Load
100
100
1205
80
60
60
40
Efficiency %
Efficiency %
40
0505
20
0
0509
80
2405
0%
40%
20%
80%
60%
1209
20
0
100%
2409
0%
100
1212
2412
80
60
40
40
0512
Efficiency %
Efficiency %
2415
80
60
20
0%
20%
40%
80%
60%
100%
0515
20
0
1215
0%
Efficiency / Load
100
1205
Efficiency / Load
100
1212
80
0505
60
60
0512
40
40%
Total Output current (%)
60%
80%
Efficiency %
2405
100%
0%
20%
40%
60%
Total Output current (%)
July-2006
80%
0515
40
2412
20
0
1215
80
60
40
20
100%
RY/RX-xx15D
Efficiency %
80
Efficiency %
80%
60%
Efficiency / Load
100
54
40%
RY/RX-xx12D
RY/RX-xx05D
20%
20%
Total Output current (%)
Total Output current (%)
0%
100%
80%
60%
Efficiency / Load
Efficiency / Load
100
0
40%
RY/RX-xx15S
RY/RX-xx12S
0
20%
Total Output current (%)
Total Output current (%)
100%
2415
20
0
0%
20%
40%
60%
80%
100%
Total Output current (%)
www.recom-international.com
ECONOLINE
RY & RX
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
7.05
RECOM
RY-xxxxS
****
10.20
19.65
0.25
Bottom View
5 x 2.54
2.0
RECOM
RY-0505S
****
RECOM
RY-0505D
****
1 2
Recommended Footprint Details
1.27
Dual Output
0.51 typ.
0.51 typ.
4.10
Single Output
1.00 ø+0.15/–0
2.54
4 5 6
RX Pin Connections
Pin #
Top View
2.54
1 2
4 5 6
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
4
–Vout
–Vout
5
CTRL
Com
6
+Vout
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
14 PIN DIP Package
Single Output
Dual Output
10.00
RECOM
RX-0505S
****
7.10
7.10
2.50
12.70
3.25
3.25
15.24
2.50
19.90
19.90
1
1
Bottom View
14
11 10 9
14
Bottom View
RX Pin Connections
6 7
9 8
Recommended Footprint Details
1.00 ø+0.15/–0
1.00 ø+0.15/–0
2.54
2.54
7.70
Pin #
Single
Dual
1
–Vin
–Vin
6
No Pin
+Vout
7
No Pin
Com
8
No Pin
–Vout
9
+Vout
Com
10
CTRL
No Pin
11
–Vout
No Pin
14
+Vin
+Vin
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
2.54
Top View
www.recom-international.com
2.54
Top View
July-2006
55
Features
Regulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Internal SMD Technology
1kVDC Isolation
Continuous Short Circuit Protected
UL94V-0 Package Material
Regulated Output
No External Components Required
Efficiency to 63%
DC/DC-Converter
RY/S_DCP
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Input Current
Full Load No Load
Efficiency
(VDC)
(VDC)
(mA)
(mA)
(%)
SIP 7
RY-0505SCP/DCP
5
5/±5
200/±100
350
20
57
RY-0512SCP/DCP
5
12/±12
84/±42
330
32
61
RY-0515SCP/DCP
5
15/±15
67/±34
322
32
62
RY-1205SCP/DCP
12
5/±5
200/±100
141
10
59
RY-1212SCP/DCP
12
12/±12
84/±42
134
15
62
RY-1215SCP/DCP
12
15/±15
67/±34
132
15
63
RY-2405SCP/DCP
24
5/±5
200/±100
67
6
62
RY-2412SCP/DCP
24
12/±12
84/±42
66
6
63
RY-2415SCP/DCP
24
15/±15
67/±34
66
6
63
1 Watt
SIP7
Single & Dual
Output
xx = Input Voltage
Description
These converters are designed to offer short circuit protected outputs in industrial standard 1 Watt package for the temperature range -25°C to +70°C.
The Single-output-converters also offer a Remote-On-Off pin for external control of the output voltage by
standard TTL-open-collector-port or similar. For details regarding this feature please refer to our RY-series.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±2%
Line Voltage Regulation
±0.5% max.
Load Voltage Regulation (10% to 100% full load)
±0.5% max.
Output Ripple and Noise (20MHz limited)
Operating Frequency
60% typ.
20pF max.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
continuous
Temperature Coefficient
0.03%/°C
Operating Temperature Range (free air convection)
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +100°C
Relative Humidity
(+70°C)
56
80
60
40
30
20
0
-25
Safe Operating Area
0
25
50 70 7585 100
Operating Temperature (°C)
95% RH
Package Weight
}
120
100
1000VDC min.
see Application Notes
Output Power (%)
(tested for 1 second)
(long term isolation)
Isolation Capacitance
MTBF (+25°C)
(Ambient Temperature)
100kHz max.
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
Derating-Graph
50mVp-p max.
2.9g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
1023 x 10 hours
using MIL-HDBK 217F
170 x 103 hours
July-2006
www.recom-international.com
ECONOLINE
RY-S_DCP
Series
DC/DC-Converter
Typical Characteristics
RY-24xxSCP
RY-05xxSCP
Efficiency / Load
Efficiency / Load
100
100
80
80
0505
60
40
Efficiency %
Efficiency %
40
0512
20
0
2405
60
0515
0% 20%
40%
60%
Total Output current (%)
80%
20
0
100%
2415
0% 20%
40%
60%
Total Output current (%)
120
100
0512
80
Output Voltage (%)
Output Voltage (%)
100
0505
60
40
20
0515
0
100
50
Output Current (%)
80
40
20
2415
0
100
Output Current (%)
300
200
RY-1212_1515DCP
Efficiency / Load
Efficiency / Load
100
100
80
80
60
60
40
1212
40
Efficiency %
Efficiency %
2405
60
250
200
150
RY-05xxDCP
0505
20
0512
0% 20%
40%
60%
Total Output current (%)
80%
100%
20
0
1515
0% 20%
40%
60%
Total Output current (%)
120
100
100
Output Voltage (%)
120
80
0505D
60
40
0512D
20
0
100
50
Output Current (%)
www.recom-international.com
150
80%
100%
Over Current Characteristics
Over Current Characteristics
Output Voltage (%)
100%
Over Current Characteristics
Over Current Characteristics
120
0
80%
200
250
July-2006
80
1212D
60
40
20
1515D
0
100
Output Current (%)
200
300
57
ECONOLINE
RY/S_DCP
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
Single Output
10.20
4.10
RECOM
RY-xxxxSCP
****
2.54
7.10
Dual Output
0.51 typ.
0.51 typ.
10.20
RECOM
RY-xxxxDCP
****
RECOM
RY-xxxxSCP
****
0.51 typ.
2.54
4.10
Single Output
1 2
0.51 typ.
6
4
Dual Output
19.60
19.60
1.25
Bottom View
0.25
1.25
RECOM
RY-xxxxDCP
****
0.25
Bottom View
2.0
2.0
1 2
5 6 7
Pin Connections
Recommended Footprint Details
1.00 ø+0.15/–0
2.54
2.54
Top View
1.00 ø+0.15/–0
2.54
2.54
Top View
Pin #
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
4
–Vout
No Pin
5
No Pin
–Vout
6
+Vout
Com
7
No Pin
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
58
July-2006
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Custom Solutions Available
1kVDC & 2kVDC Isolation
No External Components Required
Optional Continuous Short Circuit Protected
UL94V-0 Package Material
No Heatsink Required
Efficiency to 85%
DC/DC-Converter
RN
Series
1.25 Watt
DIP8
Single Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(2kV)
(VDC)
(VDC)
(mA)
(%)
RN-xx3.3S
(H)
3.3, 5, 9, 12, 15, 24
3.3
378
70
RN-xx05S
(H)
3.3, 5, 9, 12, 15, 24
5
250
70-72
RN-xx07S
(H)
3.3, 5, 9, 12, 15, 24
7
180
72-75
RN-xx09S
(H)
3.3, 5, 9, 12, 15, 24
9
140
75-80
RN-xx12S
(H)
3.3, 5, 9, 12, 15, 24
12
104
79-82
RN-xx15S
(H)
3.3, 5, 9, 12, 15, 24
15
84
80-84
DIP 8
RN-xx24S
(H)
3.3, 5, 9, 12, 15, 24
24
52
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RN-0505S/P, RN-0505S/HP
80-85
EN-60950-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
75mVp-p max.
Operating Frequency
H-Suffix
H-Suffix
70% min. / 75% typ.
106mW min. / 153mW typ. / 210mW max.
(tested for 1 second)
1000VDC min.
(long term isolation)
see Application Notes
(Ambient Temperature)
(tested for 1 second)
(long term isolation)
100
2000VDC min.
see Application Notes
30pF min. / 95pF max.
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
80
Output Power (%)
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
Isolation Resistance
Derating-Graph
50kHz min. / 100kHz typ. / 105kHz max.
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
1.9g
}
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
using MIL-HDBK 217F
955 x 103 hours
using MIL-HDBK 217F
132 x 103 hours
July-2006
59
ECONOLINE
RN
Series
DC/DC-Converter
Typical Characteristics
RN-xx09S
RN-xx05S
Efficiency / Load
Efficiency / Load
100
100
1205
60
60
40
40
20
0
0%
40%
20%
60%
80%
0
100%
Deviation / Load
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
-10.000
100%
1209
RN-xx15S
Efficiency / Load
100
0515
80
60
60
1212
20
0%
40%
20%
60%
80%
1215
40
Efficiency %
40
Efficiency %
100%
0.000
-5.000
0512
80
100%
20
0
0%
40%
60%
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
20%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
20.000
20.000
Deviation from Nominal (%)
Deviation from Nominal (%)
80%
5.000
100
60
0% 20%
40%
60%
Total Output current (%)
0509
10.000
Efficiency / Load
0512
5.000
-10.000
100%
15.000
RN-xx12S
-5.000
80%
20.000
0505
10.000
0.000
60%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
40%
20%
25.000
15.000
15.000
0%
Total Output current (%)
25.000
0
1209
20
Total Output current (%)
-10.000
0509
80
Efficiency %
Efficiency %
80
0505
1212
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
0515
10.000
5.000
0.000
-5.000
-10.000
July-2006
1215
www.recom-international.com
ECONOLINE
RN
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
8 PIN DIP Package
12.60
10.10
RECOM
RN-0505S
****
7.62
ø 0.51 typ.
3.25 min.
7.62
Recommended Footprint Details
1.00ø+0.15/–0
7.62
7.62
1
4
Bottom View
7
5
2.54
ø 0.51 typ.
5.08
www.recom-international.com
2.54
Top View
July-2006
Pin Connections
Pin #
Single
1
–Vin
4
+Vin
5
+Vout
7
–Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
61
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
1.5W/1.8W in Mini DIP and SMD Packages
1KVDC Isolation
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Internal SMD design
100% Burned In
Efficiency to 70%
DC/DC-Converter
REC1.5- &
REC1.8SR/H1
Series
Selection Guide
Part
Input
Output
Output
Voltage
Voltage
Current
(VDC)
(VDC)
(mA)
REC1.5-xx3.3SR/H1
5, 12, 24
3.3
450
REC1.5-xx05SR/H1
5, 12, 24
5
300
REC1.5-xx09SR/H1
5, 12, 24
9
166
REC1.5-xx12SR/H1
5, 12, 24
12
125
REC1.5-xx15SR/H1
5, 12, 24
15
100
REC1.8-xx3.3SR/H1
5, 12, 24
3.3
500
REC1.8-xx05SR/H1
5, 12, 24
5
360
REC1.8-xx09SR/H1
5, 12, 24
9
200
REC1.8-xx12SR/H1
5, 12, 24
12
150
REC1.8-xx15SR/H1
5, 12, 24
15
120
Number
DIP24 miniature (/SMD)
1.5/1.8 Watt
DIP24 miniature & SMD
Single Output
* add suffix "/SMD" for SMD package, e.g. REC1.5-0505SR/H1/SMD
* add suffix “/M“for Metal Case, e.g. REC1.5-0505SR/H1/M
Specifications (Core Operating Area)
Input Voltage Range
±15% max
Output Voltage Accuracy
±3% max.
Line Voltage Regulation
±0.4% max
Load Voltage Regulation (10% to 100% full load )
±0.8% max.
Output Ripple and Noise (at 20MHz BW)
100mVp-p max.
Operating Frequency
Derating-Graph
85kHz min.
Efficiency
65% min.
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
(Ambient Temperature)
200mW max.
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
100
Isolation Resistance
1 GΩ min.
80
Short Circuit Protection
Continuous
60
Short Circuit Protection
-40°C to +80°C (see Graph)
Storage Temperature Range
-50°C to +125°C
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+80°C)
62
}
Output Power (%)
20pF min. / 60pF max.
Isolation Capacitance
40
25
20
0
Safe Operating Area
-40
0
50 80 100
150
Operating Temperature °C
8.5g
Detailed information see
Application Notes chapter “MTBF”
3
using MIL-HDBK 217F
1000 x 10 hours
using MIL-HDBK 217F
150 x 103 hours
July-2006
www.recom-international.com
REC1.5-SR/H1 &
REC1.8-SR/H1 Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
24 PIN DIP Miniature Package
14.50
32.30
RECOM
REC1.8-0505SR/H1
9.60
****
4.10
0.25
2.54
16.4 max.
0.50±0.05
1 2 3
1.0ø+0.15/–0
2.54
32.35 max.
10 11 12
Bottom View
16.10
2.54
15 14 13
24 23 22 21
Top View
24 PIN DIP SMD Package
14.50
32.30
Pin Connections
9.60
10.20
2.54
Pin #
8.89
18.70
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
16.0
Bottom View
17.24
11 x 2.54
www.recom-international.com
NC
3 & 21
NC
22
NC
10 & 15
–Vout
11 & 14
+Vout
12 & 13
–Vin
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
19.27
15 14 13
24 23 22 21
+Vin
2 & 23
NC = No Connection
2.03
10 11 12
1 2 3
Single
1 & 24
1
27.94
July-2006
63
Features
Unregulated
Converters
●
●
●
●
●
ECONOLINE
EN 60950 certified, rated for 250VAC
UL-60950-1 / CSA C22.2 certified
5.2kVDC Isolation for 1 Minute
Optional Continuous Short Circuit Protected
Wide Operating Temperature Range at
full 2 Watts Load, –40°C to +85°C
Twin Chamber Transformer System
UL94V-0 Package Material
Efficiency to 80%
●
●
●
DC/DC-Converter
RxxP2xx
S_D
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RxxP23.3S
5, 9, 12, 15, 24
3.3
600
70
RxxP205S
5, 9, 12, 15, 24
5
400
70-75
RxxP209S
5, 9, 12, 15, 24
9
222
70-75
RxxP212S
5, 9, 12, 15, 24
12
167
70-75
RxxP215S
5, 9, 12, 15, 24
15
132
75-80
RxxP23.3D
5, 9, 12, 15, 24
±3.3
±300
70
RxxP205D
5, 9, 12, 15, 24
±5
±200
70-75
RxxP209D
5, 9, 12, 15, 24
±9
±111
70-75
RxxP212D
5, 9, 12, 15, 24
±12
±85
70-75
SIP 7
RxxP215D
5, 9, 12, 15, 24
±15
±66
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R05P205S/P, R05P205D/P
2 Watt
SIP 7
Single & Dual
Output
75-80
Description
The RxxP2xxS_D Series of DC/DC Converters are fully certified to EN 60950/ UL-60950-1 and CSA C22.2.
This makes them ideal for all telecom and safety applications where approved isolation is required.
EN-60950-1 Certified
UL-60950-1 Pending
EN-60601-1 Certified
Specifications
(measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
3.3, 5V output types
other output types
Output Ripple and Noise (20MHz BW)
(Ambient Temperature)
200mVp-p max.
Operating Frequency
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
65% min. / 80% max.
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
15% max.
10% max.
148mW min. / 220mW typ. / 355mW max.
(tested for 1 minute)
(long term isolation)
Isolation Capacitance
1.5pF min. / 10pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
100
5200VDC min.
see Application Notes
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
80
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
1.2%/1% of Vin typ.
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
95% RH
Package Weight
4.3g
continued on next page
64
July-2006
www.recom-international.com
RxxP2xxS_D
Series
ECONOLINE
DC/DC-Converter
Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified)
MTBF (+25°C)
}
using MIL-HDBK 217F Single types
Dual types
2113 x 103 hours
2434 x 103 hours
using MIL-HDBK 217F Single types
Dual types
299 x 103 hours
334 x 103 hours
Detailed Information see
Application Notes chapter "MTBF"
(+85°C)
Typical Characteristics, Tolerance Envelope
RxxP212/15S
RxxP205/09S
Efficiency / Load
Efficiency / Load
100
R05P205S,
R12P205S
80
R05P209S
60
60
40
40
R12P09S
20
0
0%
20%
40%
60%
80%
0
100%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20%
40%
60%
20.000
R05P205S
R05P209S
10.000
5.000
0.000
R12P209S
-5.000
R12P205S
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
R05P212S
15.000
R05P212S
10.000
5.000
0.000
R12P212S
-5.000
-10.000
R12P215S
0% 20%
40%
60%
Total Output current (%)
80%
100%
RxxP212/15D
RxxP205/09D
Efficiency / Load
Efficiency / Load
100
100
R05P205D,
R12P205D
80
R05P209D
R12P215D
R12P212D
80
60
60
R12P209D
20
0%
20%
40%
60%
80%
R05P215D
40
Efficiency %
40
Efficiency %
0%
Deviation / Load
20.000
R05P212D
20
0
100%
0%
20%
40%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
R12P205D
15.000
20.000
R05P209D
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
R12P215S
25.000
15.000
R05P205D
10.000
5.000
0.000
R12P209D
-5.000
-10.000
R05P215S
Total Output current (%)
25.000
0
R12P215S
20
Total Output current (%)
-10.000
R05P212S
80
Efficiency %
Efficiency %
100
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
R12P212D
R05P212D
R05P212D
10.000
5.000
0.000
-5.000
-10.000
July-2006
R12P215D
0% 20%
40%
60%
Total Output current (%)
80%
100%
65
RxxP2xxS_D
Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
9.80
12.50
RECOM
R05P205D
****
4.1
0.51
1 2
0.50
Recommended Footprint Details
Bottom View
1.00ø+0.15/–0
2.54
19.50
0.50
2.40
1.90
66
Dual Output
Single Output
RECOM
R05P205D
****
RECOM
R05P205S
****
1 2
5 6 7
5
7
Pin Connections
Pin #
1
2
5
6
7
Single
+Vin
-Vin
–Vout
No Pin
+Vout
Dual
+Vin
-Vin
–Vout
Com
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
15.24
2.54
Top View
July-2006
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
ECONOLINE
1kVDC Isolation
Internal SMD Construction
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Efficiency to 85%
DC/DC-Converter
RTS & RTD
Series
Selection Guide
Part
Number
Input
Voltage
Outpu
Voltage
Output
Current
Efficiency
(3kV)
(VDC)
(VDC)
(mA)
(%)
RTS-xx3.3
(H)
5, 9, 12, 15, 24
3.3
606
70-75
RTS-xx05
(H)
5, 9, 12, 15, 24
5
400
80-85
RTS-xx09
(H)
5, 9, 12, 15, 24
9
222
80-85
RTS-xx12
(H)
5, 9, 12, 15, 24
12
167
80-85
RTS-xx15
(H)
5, 9, 12, 15, 24
15
133
80-85
RTS-xx24
(H)
5, 9, 12, 15, 24
24
83
80-85
RTD-xx05
(H)
5, 9, 12, 15, 24
±5
±200
70-75
RTD-xx09
(H)
5, 9, 12, 15, 24
±9
±111
75-78
RTD-xx12
(H)
5, 9, 12, 15, 24
±12
±83
75-83
RTD-xx15
(H)
5, 9, 12, 15, 24
±15
±66
75-85
SMD
RTD-xx24
(H)
5, 9, 12, 15, 24
±24
±42
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RTS-0505/P, RTD-0505/P
2 Watt
SMD
Single & Dual
Output
78-85
EN-60601-1 Certified
(Suffix H3)
Description
** add suffix -R for tape&reel packing e.g.
Compared to standard 2 Watt packages, space savings of 80% and 77% respectively are achieved by these
RTS & RTD 2 Watts SMD-Miniature DC/DC Converters. They have been specifically designed for applications
where board space is at a premium since these 2 Watt converters have only a slightly larger foot print than
conventional 1 Watt converters.
With efficiencies up to 85%, external cooling is not needed, as the full output power is available over the operating temperature range -40°C to +85°C. All converters have an I/O-Isolation of 1kVDC, or optionally 3kV,
making them suitable for many applications.
RTS-0505-R. For more details and dimensions
of the tapes and reels see page 334 to 336.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin max.
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
Derating-Graph
20% max.
15% max.
10% max.
(Ambient Temperature)
150mVp-p max.
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
H-Suffix
Rated Working Voltage
70% min. / 80% typ.
RTS typ. 124mW min. / 186mW typ. / 250mW max.
RTD typ. 159mW min. / 192mW typ. / 240mW max.
(tested for 1 second)
1000VDC min.
(tested for 1 second)
3000VDC min.
(long term isolation)
see Application Notes
Isolation Capacitance
40pF min. / 115pF max.
Isolation Resistance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
Storage Temperature Range
1 Second
Continuous
100
80
Output Power (%)
Operating Frequency
60
40
Safe Operating Area
20
0
85 100
95
Operating Temperature °C
-40
0
50
150
-40°C to +85°C (see Graph)
-55°C to +125°C
continued on next page
www.recom-international.com
07-May-2007
67
ECONOLINE
RTS & RTD
Series
DC/DC-Converter
Specifications (Core Operating Area)
Reflow Temperature ROHS compliant (for more details see Application Notes)
Relative Humidity
Package Weight
MTBF (+25°C)
(+85°C)
}
245°C (30 sec) max.
95% RH
2.1g
2.5g
RTS types
RTD types
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
886 x 103 hours
using MIL-HDBK 217F
128 x 103 hours
Typical Characteristics
RTS-xx09
RTS-xx05
Efficiency / Load
Efficiency / Load
100
0505
100
1205
80
60
60
2405
20
0%
40%
20%
80%
60%
0
100%
0505
20.000
1205
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
2405
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
0.000
-10.000
100%
RTS-xx15
100
0512
40
Efficiency %
Efficiency %
60
2412
20
40%
20%
80%
60%
100%
1215
20
0
Total Output current (%)
2415
0%
40%
20%
80%
100%
80%
100%
60%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
20.000
1212
Deviation from Nominal (%)
Deviation from Nominal (%)
0515
80
1212
0%
0% 20%
40%
60%
Total Output current (%)
Efficiency / Load
40
68
100%
2409
-5.000
60
10.000
5.000
-10.000
80%
1209
5.000
100
-5.000
100%
10.000
RTS-xx12
80
0509
15.000
Efficiency / Load
0.000
80%
60%
25.000
15.000
20.000
40%
20%
Deviation / Load
Deviation / Load
15.000
0%
Total Output current (%)
25.000
0
2409
20
Total Output current (%)
-10.000
1209
40
Efficiency %
Efficiency %
40
0
0509
80
2412
0% 20%
40%
60%
Total Output current (%)
80%
15.000
0515
2415
10.000
5.000
0.000
-5.000
-10.000
100%
07-May-2007
1215
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
ECONOLINE
RTS & RTD
Series
DC/DC-Converter
Typical Characteristics
RTD-xx05
Efficiency / Load
100
60
2405
20
0
0%
40%
20%
80%
60%
60
60
40
40
1212
20
0
100%
Total Output current (%)
0%
40%
20%
80%
60%
100%
0505
0%
Deviation from Nominal (%)
5.000
2405
0% 20%
40%
60%
Total Output current (%)
20.000
0512
10.000
5.000
0.000
2412
-5.000
-10.000
80%
60%
100%
Deviation / Load
1212
15.000
100%
80%
40%
20%
25.000
20.000
1205
10.000
-5.000
0
Total Output current (%)
25.000
0.000
1215
20
Deviation / Load
Deviation / Load
20.000
0515
Total Output current (%)
25.000
15.000
2415
80
Deviation from Nominal (%)
Efficiency %
40
Efficiency %
0505
0512
2412
80
100
Efficiency %
1205
80
Deviation from Nominal (%)
Efficiency / Load
Efficiency / Load
100
-10.000
RTD-xx15
RTD-xx12
0% 20%
40%
60%
Total Output current (%)
100%
80%
1215
0515
15.000
10.000
5.000
0.000
2415
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
Package Style and Pinning (mm)
8 PIN Single SMD Package
12.75
9.30
12.40
9.00
7.05
1.65
8
10
5
1 2
8.60
10.00
11.80
4
1 2
Recommended Footprint Details
12.70
Bottom View
2.54
0.50
8
Top View
1 2
1.20
7.05
1.65
9.00
9.00
8.60
10.00
2.54x4
11.80
Pin Connections
Pin #
1.20
4 5
9.30
15.24
14.84
7
RECOM
RTD-xxxx
xxxx
RECOM
RTS-xxxx
xxxx
9.00
2.54 x 3
3rd angle
projection
10 PIN Dual SMD Package
5
4
1.80
Single
Dual
1
–Vin
–Vin
2
+Vin
+Vin
4
–Vout
Com
5
+Vout
–Vout
7
No Pin
+Vout
8
NC
No Pin
10
No Pin
NC
0.50
Recommended Footprint Details
12.70
Bottom View
2.57
1.20
10
1.20
7
Top View
1 2
4 5
1.80
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
07-May-2007
69
,
Features
Unregulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Custom Solutions Available
1kVDC Isolation
No External Components Required
Optional Continuous Short Circuit Protected
UL94V-0 Package Material
No Heatsink Required
Efficiency to 87%
DC/DC-Converter
RI
Series
2 Watt
SIP4
Single Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RI-xx3.3S
5, 9, 12, 15, 24
3.3
606
70-75
RI-xx05S
5, 9, 12, 15, 24
5
400
78-83
RI-xx07S
5, 9, 12, 15, 24
7
285
78-83
RI-xx09S
5, 9, 12, 15, 24
9
222
78-83
RI-xx12S
5, 9, 12, 15, 24
12
167
80-85
RI-xx15S
5, 9, 12, 15, 24
15
133
80-85
83
80-87
SIP4
RI-xx24S
5, 9, 12, 15, 24
24
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RI-0505S/P
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
3.3V output types
5V, output type
9V, 12V, 15V, 24V output types
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
Operating Frequency
70% min. / 80% typ.
142mW min. / 185mW typ. / 252mW max.
(tested for 1 second)
1000VDC min.
(long term isolation)
see Application Notes
Isolation Capacitance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
(+85°C)
70
}
100
80
30pF min. / 85pF max.
Isolation Resistance
MTBF (+25°C)
(Ambient Temperature)
35kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
200mVp-p max.
Output Power (%)
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
±5%
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
1.4g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
845 x 10 hours
using MIL-HDBK 217F
160 x 103 hours
July-2006
www.recom-international.com
ECONOLINE
RI
Series
DC/DC-Converter
Typical Characteristics
RI-xx3.3S
Efficiency / Load
100
Efficiency / Load
100
243.3
123.3
60
40%
20%
60%
100%
80%
053.3
100%
80%
60%
0
Deviation from Nominal (%)
123.3
0% 20%
40%
60%
Total Output current (%)
100%
80%
1205
15.000
20.000
2405
5.000
0.000
0505
-5.000
0% 20%
40%
60%
Total Output current (%)
100%
80%
Efficiency / Load
2412
Efficiency %
Efficiency %
0512
2407
0% 20%
40%
60%
Total Output current (%)
0% 20%
40%
60%
Total Output current (%)
80%
1215
100%
2415
20
0
0%
40%
20%
60%
80%
100%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
20.000
0512
Deviation from Nominal (%)
2412
10.000
5.000
-10.000
-10.000
40
25.000
-5.000
1207
-5.000
60
20
0.000
5.000
0.000
0515
80
1212
40
20.000
10
10.000
100
60
15.000
80%
0507
15.000
Efficiency / Load
100
0
100%
RI-xx15S
RI-xx12S
80
80%
Deviation / Load
10.000
-10.000
0% 20%
40%
60%
Total Output current (%)
25.000
20.000
243.3
Deviation from Nominal (%)
Deviation from Nominal (%)
40%
20%
20
Deviation / Load
5.000
-10.000
0%
25.000
10.000
-5.000
Efficiency %
0
1207
40
20
Deviation / Load
25.000
0.000
60
0505
Deviation from Nominal (%)
Efficiency %
Efficiency %
0%
2407
0507
80
40
20
20.000
1205
2405
60
053.3
40
15.000
Efficiency / Load
100
80
80
0
RI-xx07S
RI-xx05S
1212
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
July-2006
15.000
1215
0515
10.000
5.000
0.000
-5.000
-10.000
2415
0% 20%
40%
60%
Total Output current (%)
80%
100%
71
ECONOLINE
RI
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
4 PIN SIP Package
7.55
10.20
RECOM
RI-0505
****
4.10
0.51 typ.
RECOM
RI-0505
****
0.51 typ.
1 2 3 4
Recommended Footprint Details
Pin Connections
Pin #
1.00 ø+0.15/–0
11.50
2.54
0.25
Bottom
View
2.03
7.62
1.27
Top View
Dual
1
-Vin
2
+Vin
3
–Vout
4
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
2.54
72
July-2006
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Dual Output from a Single Input Rail
1kVDC & 2kVDC Isolation
Power Sharing on Output
Optional Continuous Short Circuit Protected
Custom Solutions Available
UL94V-0 Package Material
Efficiency to 86%
DC/DC-Converter
RD & RC
Series
2 Watt
SIP7 & DIP14
Dual Output
Selection Guide
Part
Number
SIP 7
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
DIP 14
RD-xx3.3D
RC-xx3.3D (H)
5, 9, 12, 15, 24
±3.3
±303
75
RD-xx05D
RC-xx05D (H)
5, 9, 12, 15, 24
±5
±200
75-82
RD-xx09D
RC-xx09D (H)
5, 9, 12, 15, 24
±9
±111
80-84
RD-xx12D
RC-xx12D (H)
5, 9, 12, 15, 24
±12
±84
80-84
RD-xx15D
RC-xx15D (H)
5, 9, 12, 15, 24
±15
±66
82-86
2kV
(%)
RD-xx24D
RC-xx24D (H)
5, 9, 12, 15, 24
±24
±42
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RD-0505D/P, RD-0505D/HP
82-86
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
150mVp-p max.
Operating Frequency
70% min. / 80% typ.
H-Suffix
H-Suffix
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Capacitance
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
}
100
80
40pF min. / 115pF max.
Isolation Resistance
(+85°C)
(Ambient Temperature)
163mW min. / 223mW typ. / 350mW max.
(tested for 1 second)
1000VDC min.
(long term isolation)
see Application Notes.
Output Power (%)
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
MTBF (+25°C)
Derating-Graph
34kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
2.8g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
988 x 103 hours
using MIL-HDBK 217F
135 x 103 hours
73
ECONOLINE
RD & RC
Series
DC/DC-Converter
Typical Characteristics
RD&RC-xx09D
RD&RC-xx05D
Efficiency / Load
Efficiency / Load
100
100
0505
80
60
60
2405
1205
20
0% 20%
40%
60%
Total Output current (%)
80%
0
0505
20.000
2405
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
-10.000
100%
2412
100%
0515
80
60
1212
0512
20
0%
40%
20%
60%
80%
1215
40
Efficiency %
Efficiency %
80%
Efficiency / Load
40
100%
2415
20
0
0%
40%
20%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
20.000
1212
Deviation from Nominal (%)
Deviation from Nominal (%)
0% 20%
40%
60%
Total Output current (%)
RD&RC-xx15D
60
74
2409
-5.000
100
80
10.000
5.000
-10.000
0509
5.000
0.000
100
-5.000
100%
10.000
Efficiency / Load
0.000
1209
15.000
RD&RC-xx12D
20.000
80%
25.000
15.000
15.000
0% 20%
40%
60%
Total Output current (%)
Deviation / Load
Deviation / Load
0
2409
20
100%
25.000
-10.000
1209
40
Efficiency %
Efficiency %
40
0
0509
80
2412
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
0515
2415
10.000
5.000
0.000
-5.000
-10.000
July-2006
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
RD & RC
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
Dual Output
7.05
RECOM
RD-xxxxD
****
10.20
RECOM
RD-0505D
****
0.51 typ.
1 2
0.51 typ.
4.10
Recommended Footprint Details
19.65
1.27
0.25
Bottom View
5 x 2.54
2.0
1.00 ø+0.15/–0
2.54
2.54
Top View
4 5 6
Pin Connections
Pin #
RD
1
+Vin
2
–Vin
4
–Vout
5
Com
6
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
14 PIN DIP Package
19.90
10.00
Dual Output
RECOM
RC-0505D
****
7.10
3.25
7.70
15.24
2.0
Recommended Footprint Details
1.00 ø+0.15/–0
ø 0.51 typ.
1
14
Bottom View
11
7
2.54
9 8
2.54
www.recom-international.com
Top View
Pin Connections
Pin #
RC
1
–Vin
7
NC
8
Com
9
+Vout
11
–Vout
14
+Vin
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
July-2006
75
Features
Unregulated
Converters
●
●
●
●
●
●
●
ECONOLINE
Cost Effective
1kVDC & 2kVDC Isolation
Custom Solutions Available
Optional Continuous Short Circuit Protected
No External Components Required
UL94V-0 Package Material
Efficiency to 85%
DC/DC-Converter
REZ
Series
2 Watt
SIP7
Single Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(2kV)
(VDC)
(VDC)
(mA)
(%)
REZ-xx3.3S
(H)
5, 9, 12, 15, 24
3.3
606
70-75
REZ-xx05S
(H)
5, 9, 12, 15, 24
5
400
80-85
REZ-xx09S
(H)
5, 9, 12, 15, 24
9
222
78-84
REZ-xx12S
(H)
5, 9, 12, 15, 24
12
168
80-85
REZ-xx15S
(H)
5, 9, 12, 15, 24
15
132
82-85
SIP 7
REZ-xx24S
(H)
5, 9, 12, 15, 24
24
83
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. REZ-0505S/P, REZ-0505S/HP
80-85
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
150mVp-p max.
Operating Frequency
H-Suffix
H-Suffix
70% min. / 80% typ.
134mW min. / 202mW typ. / 260mW max.
(tested for 1 second)
1000VDC min.
(long term isolation)
see Application Notes
(Ambient Temperature)
(tested for 1 second)
(long term isolation)
100
2000VDC min.
see Application Notes
40pF min. / 115pF max.
10 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
76
}
80
Output Power (%)
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
Isolation Resistance
Derating-Graph
35kHz min. / 50kHz typ. / 85kHz max.
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
2.7g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
915 x 10 hours
using MIL-HDBK 217F
170 x 103 hours
July-2006
www.recom-international.com
ECONOLINE
REZ
Series
DC/DC-Converter
Typical Characteristics
REZ-xx09S
REZ-xx05S
Efficiency / Load
Efficiency / Load
100
2405
0505
80
100
60
60
1205
20
0% 20%
40%
60%
Total Output current (%)
80%
0
Deviation / Load
1205
20.000
2405
10.000
5.000
0.000
0505
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
100%
80%
100%
5.000
0.000
1209
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
REZ-xx15S
Efficiency / Load
Efficiency / Load
100
2412
80
0509
10.000
100
1215
0515
80
60
60
1212
40
40
0512
20
0%
40%
20%
80%
60%
Efficiency %
Efficiency %
2409
15.000
REZ-xx12S
100%
2415
20
0
0%
40%
20%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
2412
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
80%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
10.000
5.000
0.000
0512
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
0
2409
20
100%
25.000
-10.000
1209
40
Efficiency %
Efficiency %
40
0
0509
80
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
80%
100%
15.000
2415
0515
10.000
5.000
0.000
-5.000
-10.000
July-2006
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
77
ECONOLINE
REZ
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
7.05
10.20
RECOM
REZ-xxxxS
****
RECOM
REZ-xxxxS
****
0.51 typ.
1 2
0.51 typ.
4.10
Recommended Footprint Details
19.65
1.27
2.0
78
Bottom View
5 x 2.54
0.25
1.00 ø+0.15/–0
2.54
2.54
Top View
July-2006
4
6
Pin Connections
Pin #
1
Single
+Vin
2
–Vin
4
–Vout
6
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
Features
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
2W Single and Dual Outputs in DIP 14
3kVDC and 4kVDC Isolation
Optional Continuous Short Circuit Protected
Custom Solutions Available
UL94V-0 Package Material
Efficiency up to 85%
DC/DC-Converter
RJZ & RGZ
Series
Selection Guide
Part
Number
DIP 14
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
4kV
Input
Voltage
(VDC)
RJZ-xx3.3S
(H)
3.3,5,9,12,15,24
3.3
606
70-75
RJZ-xx05S
(H)
3.3,5,9,12,15,24
5
400
78-85
RJZ-xx09S
(H)
3.3,5,9,12,15,24
9
222
78-84
RJZ-xx12S
(H)
3.3,5,9,12,15,24
12
166
80-85
RJZ-xx15S
(H)
3.3,5,9,12,15,24
15
133
82-85
RJZ-xx24S
(H)
3.3,5,9,12,15,24
24
83
80-85
RGZ-xx3.3D (H)
3.3,5,9,12,15,24
±3.3
±303
75
RGZ-xx05D
(H)
3.3,5,9,12,15,24
±5
±200
75-82
RGZ-xx09D
(H)
3.3,5,9,12,15,24
±9
±111
75-80
RGZ-xx12D
(H)
3.3,5,9,12,15,24
±12
±84
78-82
RGZ-xx15D
(H)
3.3,5,9,12,15,24
±15
±66
80-84
RGZ-xx24D (H)
3.3,5,9,12,15,24
±24
±42
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RGZ-0524D/P,
e.g. RGZ-0524D/HP, has 4kV Isolation and is Short Circuit Protected.
82-84
2 Watt
DIP14
Single & Dual
Output
(%)
EN-60950-1 Certified
EN-60601-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
±5%
1.2%/1% of Vin typ.
±20% max.
±15% max.
±10% max.
3.3V Types
5V Types
All other Types
Output Ripple and Noise (20MHz limited)
Temperature Coefficient
(Ambient Temperature)
0.02%/°C max.
Operating Frequency
20kHz min./ 50kHz typ. / 90kHz max.
70% min. / 80% typ.
3000VDC min.
4000VDC min.
see Application Notes
100
Isolation Capacitance
120pF max.
60
Isolation Resistance
15GΩ min.
Short Circuit Protection
P-Suffix
1 Second
Continuous
(tested for 1 second)
(tested for 1 second)
(long term isolation)
Operating Temperature Range (free air convection)
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
Package Weight
www.recom-international.com
80
Output Power (%)
Efficiency at Full Load
Isolation Voltage
(H-Suffix)
Rated Working Voltage
Derating-Graph
±150mVp-p max.
40
30
20
0
Safe Operating Area
-40
0
50
90
85
Operating Temperature °C
150
95% RH
2.8g
continued on next page
July-2006
79
ECONOLINE
RJZ_RGZ
Series
DC/DC-Converter
Typical Characteristics
MTBF (+25°C)
using MIL-HDBK 217F
}
Detailed Information see
Application Notes chapter "MTBF"
(+85°C)
using MIL-HDBK 217F
RJZ types
RGZtypes
893 x 103 hours
810 x 103 hours
RJZ types
RGZ types
208 x 103 hours
151 x 103 hours
Typical Characteristics
RJZ-xx09S
RJZ-xx05S
100
100
80
80
2405
1205
0% 20%
40%
60%
Total Output current (%)
80%
100%
Deviation / Load
10.000
5.000
0.000
0505
0% 20%
40%
60%
Total Output current (%)
80%
100%
10.000
5.000
-5.000
0515
1215
100%
5.000
0.000
2415
0% 20%
40%
60%
Total Output current (%)
80%
20
0
100%
0505
80
60
1205
2405
0% 20%
40%
60%
Total Output current (%)
80%
100%
20
0
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
25.000
2405
20.000
0505
15.000
10.000
5.000
0.000
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
0515
2409
30.000
25.000
2415
0509
1209
40
30.000
25.000
100%
80%
Efficiency / Load
Deviation / Load
Deviation / Load
30.000
15.000
0% 20%
40%
60%
Total Output current (%)
RGZ-xx09D
Efficiency %
40
20.000
2412
-5.000
60
Efficiency %
Efficiency %
80%
10.000
100
80
40
Deviation from Nominal (%)
0% 20%
40%
60%
Total Output current (%)
15.000
100
60
80
1209
0512
Efficiency / Load
100
100%
80%
1212
20.000
RGZ-xx05D
Efficiency / Load
-5.000
0509
15.000
0.000
0% 20%
40%
60%
Total Output current (%)
25.000
2409
20.000
RJZ-xx15S
20
0
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
Deviation from Nominal (%)
1205
15.000
0.000
100%
30.000
25.000
2405
20.000
0
80%
1212
20
Deviation / Load
25.000
80
2409
0% 20%
40%
60%
Total Output current (%)
0512
40
30.000
30.000
-5.000
60
1209
20
0
2412
80
40
Efficiency %
Efficiency %
0
0509
60
0505
20
Efficiency / Load
100
Efficiency %
60
40
RJZ-xx12S
Efficiency / Load
Efficiency / Load
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
2409
20.000
0509
15.000
10.000
5.000
0.000
-5.000
1209
0% 20%
40%
60%
Total Output current (%)
www.recom-international.com
ECONOLINE
RJZ_RGZ
Series
DC/DC-Converter
Typical Characteristics
RGZ-xx15D
RGZ-xx12D
Efficiency / Load
Efficiency / Load
100
100
2412
80
60
60
0512
Efficiency %
Efficiency %
1212
20
0% 20%
40%
60%
Total Output current (%)
0
Deviation / Load
0% 20%
40%
60%
Total Output current (%)
80%
100%
Deviation / Load
30.000
25.000
25.000
1212
20.000
Deviation from Nominal (%)
Deviation from Nominal (%)
2415
20
100%
80%
30.000
0512
15.000
10.000
5.000
0.000
-5.000
1215
40
40
0
0515
80
2412
0% 20%
40%
60%
Total Output current (%)
80%
100%
2415
20.000
0515
15.000
10.000
5.000
0.000
-5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
Package Style and Pinning (mm)
3rd angle
projection
14 PIN DIP Package
19.90
10.00
7.10
3.25
Dual Output
RECOM
RJZ-0505S
****
RECOM
RGZ-0505D
****
7.70
15.24
2.0
Single Output
Pin Connections
Recommended Footprint Details
1.00 ø+0.15/–0
ø 0.51 typ.
1
14
Bottom View
7
2.54
10 9 8
2.54
www.recom-international.com
Top View
July-2006
Pin #
RJZ
RGZ
1
–Vin
–Vin
7
NC
NC
8
+Vout
+Vout
9
No Pin
Com
10
–Vout
–Vout
14
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
81
Features
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
Safety standards and approvals:
EN 60950, EN 60601 certified, rated for
250VAC
Custom Solutions Available
3kVDC & 4kVDC Isolation
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Efficiency to 84%
DC/DC-Converter
RKZ
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
(%)
RKZ-xx3.3S (H)
5, 9, 12, 15, 24
3.3
606
70
RKZ-xx05S
(H)
5, 9, 12, 15, 24
5
400
82-84
RKZ-xx09S
(H)
5, 9, 12, 15, 24
9
222
78-84
RKZ-xx12S
(H)
5, 9, 12, 15, 24
12
168
82-84
RKZ-xx15S
(H)
5, 9, 12, 15, 24
15
132
82-84
RKZ-xx24S
(H)
5, 9, 12, 15, 24
24
83
82-84
RKZ-xx3.3D (H)
5, 9, 12, 15, 24
±3.3
±303
70-82
RKZ-xx05D
(H)
5, 9, 12, 15, 24
±5
±200
70-82
RKZ-xx09D
(H)
5, 9, 12, 15, 24
±9
±111
82-84
RKZ-xx12D
(H)
5, 9, 12, 15, 24
±12
±84
82-84
RKZ-xx15D
(H)
5, 9, 12, 15, 24
±15
±66
82-84
RKZ-xx24D (H)
5, 9, 12, 15, 24
±24
±42
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RKZ-0524D/P,
e.g. RKZ-0524D/HP has 4kV Isolation and is Short Circuit Protected.
82-84
SIP7
4kV
2 Watt
SIP7
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
Description
The RKZ Series of DC/DC Converters are fully certified to EN 60950-1. This makes them ideal for all Telecom and
safety applications where approved isolation is required.
EN 60950 is derived from IEC 950 and is equivalent to UL 1950 and CSA 950 standards.
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
12V, 15V, 24V output types
Output Ripple and Noise (20MHz limited)
(Ambient Temperature)
150mVp-p max.
35kHz min. / 50kHz typ. / 85kHz max.
70% min. / 80% typ.
100
134mW min. / 212mW typ. / 350mW max.
80
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
(tested for 1 second)
Rated Working Voltage
(long term isolation)
see Application Notes
(tested for 1 second)
(long term isolation)
4000VDC min.
see Application Notes
H-Suffix
H-Suffix
Isolation Capacitance
3000VDC min.
30pF min. / 110pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
Output Power (%)
Operating Frequency
Isolation Voltage
Rated Working Voltage
Derating-Graph
1.2%/1% of Vin typ.
20% max.
15% max.
10% max.
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
1 Second
Continuous
-40°C to +85°C (see Graph)
continued on next page
82
July-2006
www.recom-international.com
ECONOLINE
RKZ
Series
DC/DC-Converter
Specifications (Core Operating Area)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
2.8g
}
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
988 x 10 hours
using MIL-HDBK 217F
135 x 103 hours
Typical Characteristics
RKZ-xx09S
RKZ-xx05S
Efficiency / Load
Efficiency / Load
100
80%
100%
20.000
2405
5.000
0505
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
15.000
0.000
-5.000
-10.000
100%
0515
60
60
Efficiency %
Efficiency %
2415
20
0% 20%
40%
60%
Total Output current (%)
80%
15.000
40%
60%
80%
0
100%
20.000
Deviation from Nominal (%)
0515
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
www.recom-international.com
100%
15.000
-5.000
-10.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
Efficiency / Load
0505
0509
80
60
2405
1205
0% 20%
40%
60%
Total Output current (%)
80%
1209
40
100%
2409
20
0
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
Deviation / Load
25.000
0505
20.000
2405
5.000
-5.000
0512
RKZ-xx09D
10.000
0.000
1212
5.000
0.000
100%
25.000
2415
100%
10.000
Deviation / Load
Deviation / Load
25.000
2412
100
20
Total Output current (%)
Deviation from Nominal (%)
1209
40
40
20%
20.000
0509
100
80
-10.000
2409
Efficiency / Load
1215
80%
60%
Deviation / Load
RKZ-xx05D
80
40%
20%
25.000
5.000
Efficiency / Load
0%
0%
Total Output current (%)
10.000
RKZ-xx15S
100
0
Efficiency %
0.000
20
100%
Deviation from Nominal (%)
1205
10.000
-5.000
80%
0512
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
0.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
20.000
Efficiency %
0
1212
40
2409
20
Deviation / Load
25.000
15.000
60
Deviation from Nominal (%)
Efficiency %
Efficiency %
0% 20%
40%
60%
Total Output current (%)
2412
80
1209
40
20
0
0509
60
1205
40
-10.000
100
80
60
0
Efficiency / Load
100
2405
0505
80
RKZ-xx12S
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
1209
0509
10.000
5.000
0.000
-5.000
-10.000
2409
0% 20%
40%
60%
Total Output current (%)
83
ECONOLINE
RKZ
Series
DC/DC-Converter
Typical Characteristics
RKZ-xx15D
RKZ-xx12D
Efficiency / Load
Efficiency / Load
100
100
2412
80
60
60
1212
0512
20
0%
40%
20%
60%
100%
80%
0
0%
40%
20%
80%
60%
100%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
0512
15.000
20.000
1212
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
2415
20
Total Output current (%)
10.000
5.000
0.000
2412
-5.000
-10.000
1215
40
Efficiency %
Efficiency %
40
0
0515
80
0% 20%
40%
60%
Total Output current (%)
100%
80%
0515
15.000
2415
10.000
5.000
0.000
1215
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
7.05
10.20
RECOM
RKZ-xxxxD
****
19.65
2.0
84
Bottom View
5 x 2.54
RECOM
RKZ-xxxxD
****
RECOM
RKZ-xxxxS
****
1 2
Recommended Footprint Details
1.27
Single Output
0.51 typ.
0.51 typ.
4.10
Dual Output
0.25
1.00 ø+0.15/–0
2.54
2.54
Top View
July-2006
1 2
5 6 7
5
7
Pin Connections
Pin #
Single
Dual
1
+Vin
+Vin
2
–Vin
–Vin
5
–Vout
–Vout
6
No Pin
Com
7
+Vout
+Vout
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
●
●
●
●
●
●
●
●
Features
Unregulated
Converters
ECONOLINE
Dual Output from a Single Input Rail
Input/Output Isolation 1kVDC
Output/Output Isolation 1kVDC
Power Sharing on Outputs
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
No External Components Required
Efficiency to 85%
DC/DC-Converter
RUZ
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(V1VDC)
(V2VDC)
(mA)
(%)
RUZ-xx3.33.3
5, 9, 12, 24
3.3
3.3
303/303
70
RUZ-xx0505
5, 9, 12, 24
5
5
200/200
70-82
RUZ-xx0509
5, 9, 12, 24
5
9
200/111
70-82
RUZ-xx0512
5, 9, 12, 24
5
12
200/84
70-82
RUZ-xx0515
5, 9, 12, 24
5
15
200/66
70-82
RUZ-xx0909
5, 9, 12, 24
9
9
111/111
82-84
RUZ-xx1212
5, 9, 12, 24
12
12
84/84
82-84
RUZ-xx1515
5, 9, 12, 24
15
15
66/66
82-84
RUZ-xx2424
5, 9, 12, 24
24
24
42/42
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RUZ-050505S/P
80-85
SIP 7
2 Watt
SIP7
Isolated
Dual Output
Specifications (Core Operating Area)
nput Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
(10% to 100% full load)
.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
150mVp-p max.
Operating Frequency
Efficiency at Full Load
70% min. / 80% typ.
1)
1)
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
Isolation Capacitance
40pF min. / 120pF max.
100
10 GΩ min.
80
1 Second
Continuous
60
Isolation Resistance
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
1)
}
(Ambient Temperature)
163mW min. / 223mW typ. / 350mW max.
2.8g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
988 x 103 hours
using MIL-HDBK 217F
135 x 103 hours
Output Power (%)
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
Derating-Graph
35kHz min. / 50kHz typ. / 85kHz max.
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
Input/Output and Output V1/Output V2
www.recom-international.com
July-2006
85
ECONOLINE
RUZ
Series
DC/DC-Converter
Typical Characteristics
RUZ-xx0909
RUZ-xx0505
Efficiency / Load
Efficiency / Load
100
100
050505
80
60
60
240505
120505
20
0% 20%
40%
60%
Total Output current (%)
80%
0
Deviation / Load
050505
20.000
240505
10.000
5.000
0.000
120505
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
-10.000
241212
051515
60
121212
20
0%
20%
40%
60%
80%
121515
40
051212
Efficiency %
Efficiency %
100%
80
100%
241515
20
0
Total Output current (%)
0%
20%
40%
60%
80%
100%
Total Output current (%)
Deviation / Load
Deviation / Load
25.000
25.000
051212
20.000
121212
Deviation from Nominal (%)
Deviation from Nominal (%)
80%
Efficiency / Load
40
86
0% 20%
40%
60%
Total Output current (%)
RUZ-xx1515
60
10.000
5.000
-5.000
240909
-5.000
100
80
050909
5.000
0.000
Efficiency / Load
-10.000
100%
10.000
100
0.000
120909
15.000
RUZ-xx1212
20.000
80%
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
15.000
0% 20%
40%
60%
Total Output current (%)
25.000
15.000
0
240909
20
100%
25.000
-10.000
120909
40
Efficiency %
Efficiency %
40
0
050909
80
241212
0% 20%
40%
60%
Total Output current (%)
80%
100%
15.000
051515
241515
10.000
5.000
0.000
-5.000
-10.000
July-2006
121515
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
RUZ
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
7 PIN SIP Package
Dual Output
7.05
10.20
RECOM
RUZ-xxxxD
****
RECOM
RUZ-xxxxD
****
0.51 typ.
1 2
0.51 typ.
4.10
Recommended Footprint Details
19.65
1.27
2.0
Bottom View
5 x 2.54
0.25
1.00 ø+0.15/–0
2.54
2.54
Top View
4 5 6 7
Pin Connections
Pin #
1
Single
+Vin
2
–Vin
4
+Vout 1
5
–Vout 1
6
+Vout 2
7
–Vout 2
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
87
Features
Regulated
Converters
●
●
●
●
●
●
●
ECONOLINE
2:1 Wide Range Voltage Input
1kVDC, 2kVD & 3kVDC Isolation
UL94V-0 Package Material
Continuous Short Circuit Protection
with Current Foldback
Low Noise
No External Capacitor needed
Efficiency to 83%
DC/DC-Converter
RS
Series
Selection Guide 5V, 12V, 24V and 48V Input Types
Part Number
Input
Voltage Range
Rated Output
Voltageat
Output Current
Full Load
Efficiency
typ.
Capacitive
Load max.
SIP8
(VDC)
(VDC)
(mA)
(%)
µF
RS-053.3S (H2/H3)
4.5 - 9
3.3
500
68
1000
RS-0505S (H2/H3)
4.5 - 9
5
400
73
1000
RS-0509S (H2/H3)
4.5 - 9
9
222
74
470
RS-0512S (H2/H3)
4.5 - 9
12
166
75
220
RS-0515S (H2/H3)
4.5 - 9
15
134
75
100
RS-123.3S (H2/H3)
9 - 18
3.3
500
69
1000
RS-1205S (H2/H3)
9 - 18
5
400
75
1000
RS-1209S (H2/H3)
9 - 18
9
222
78
470
RS-1212S (H2/H3)
9 - 18
12
166
80
220
RS-1215S (H2/H3)
9 - 18
15
134
80
100
RS-243.3S (H2/H3)
18 - 36
3.3
500
70
1000
RS-2405S (H2/H3)
18 - 36
5
400
78
1000
RS-2409S (H2/H3)
18 - 36
9
222
81
470
RS-2412S (H2/H3)
18 - 36
12
166
83
220
RS-2415S (H2/H3)
18 - 36
15
134
83
100
RS-483.3S (H2/H3)
36 - 72
3.3
500
73
1000
RS-4805S (H2/H3)
36 - 72
5
400
78
1000
RS-4809S (H2/H3)
36 - 72
9
222
81
470
RS-4812S (H2/H3)
36 - 72
12
166
83
220
RS-4815S (H2/H3)
36 - 72
15
134
83
100
RS-053.3D (H2/H3)
4.5 - 9
±3.3
±250
68
±470
RS-0505D (H2/H3)
4.5 - 9
±5
±200
73
±470
RS-0509D (H2/H3)
4.5 - 9
±9
±111
74
±220
RS-0512D (H2/H3)
4.5 - 9
±12
±83
75
±100
RS-0515D (H2/H3)
4.5 - 9
±15
±67
75
±47
RS-123.3D (H2/H3)
9 - 18
±3.3
±250
69
±470
RS-1205D (H2/H3)
9 - 18
±5
±200
75
±470
RS-1209D (H2/H3)
9 - 18
±9
±111
78
±220
RS-1212D (H2/H3)
9 - 18
±12
±83
80
±100
RS-1215D (H2/H3)
9 - 18
±15
±67
80
±47
RS-243.3D (H2/H3)
18 - 36
±3.3
±250
70
±470
RS-2405D (H2/H3)
18 - 36
±5
±200
78
±470
RS-2409D (H2/H3)
18 - 36
±9
±111
81
±220
RS-2412D (H2/H3)
18 - 36
±12
±83
83
±100
RS-2415D (H2/H3)
18 - 36
±15
±67
83
±47
RS-483.3D (H2/H3)
36 - 72
±3.3
±250
73
±470
RS-4805D (H2/H3)
36 - 72
±5
±200
78
±470
RS-4809D (H2/H3)
36 - 72
±9
±111
81
±220
RS-4812D (H2/H3)
36 - 72
±12
±83
83
±100
RS-4815D (H2/H3)
36 - 72
±15
±67
83
±47
88
January-2007
2 Watt
SIP8 Isolated
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
(Suffix H2/H3 )
www.recom-international.com
RS
Series
ECONOLINE
DC/DC-Converter
Description
High power-density, an industrial temperature range of -40°C to +85°C and extra features like Remote-OnOff-control are just some of the characteristics of this converter, ideal for highly sophisticated industrial
designs. The RS series is available with isolation of 2kV or 3kV by chosing option "/H2" or "/H3" in which case
it is also ideal for medical applications which additionally require EN-60601-1 certification.
Electrical Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range
2:1
Output Accuracy
Single output
Dual output
±1%
±2%
Line Voltage Regulation
Single output
±0.2% max.
Dual output
±0.5% max.
Load Voltage Regulation
(25% to 100% full load)
Single & Dual output
Output Ripple and Noise (20MHz limited)
Single output
Dual output
85kHz min.
100kHz min. / 700kHz max.
Efficiency at Full Load
70% min. / 80% typ.
Rated Working Voltage
Isolation Capacitance (1000V version)
Isolation Capacitance (H2 and H3)
Isolation Capacitance (1000V version)
Isolation Capacitance (H2 and H3)
Isolation Resistance
80
60
40
30
20
0
Safe Operating Area
-40
0
50
85
Operating Temperature °C
100
150
1GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range
–40°C to +85°C
Storage Temperature Range
–55°C to +125°C
Relative Humidity
95% RH
Package Weight
}
100
50mW min. / 139mW typ. / 250mW max.
(tested for 1 second)
1000VDC min.
H2
2000VDC min.
H3
3000VDC min.
(long term isolation)
see Application Notes
Single
10pF min. / 40pF typ. / 60pF max.
Single
5pF min. / 30pF typ. / 60pF max.
Dual
120pF min. / 170pF typ. / 250pF max.
Dual
5pF min. / 30pF typ. / 60pF max.
Output Power (%)
No Load Power Consumption
Isolation Voltage
(+85°C)
(Ambient Temperature)
50mVp-p max.
Switching Frequency (at full Load)
MTBF (+25°C)
Derating-Graph
±0.5% typ.
4.8g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
1398 x 10 hours
using MIL-HDBK 217F
210 x 103 hours
Typical Characteristics
RS-types
RS-24xx
Efficiency / Load
100
2412
80
2405
Efficiency %
40
2415
20
0
Output Power (W)
60
2
1.70
1.5
2409
0%
20%
40%
60%
80%
100%
Total Output current (%)
www.recom-international.com
1
0.5
0
4.5 5
6
7
8
9
Input Voltage (V)
January-2007
89
RS
Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
8 PIN SIP Package
9.20
11.10
3.80
RECOM
RS-xxxx
****
0.50±0.05
Single Output
Dual Output
RECOM
RS-xxxx
****
RECOM
RS-xxxxD
****
1 2 3
0.50±0.05
Recommended Footprint Details
21.80
0.32
2.54
Pin #
1.0ø+0.15/–0
3.20
2.54
5 6 7 8
Pin Connections
Bottom View
2.0
1 2 3
5 6 7 8
Top View
Single
Dual
1
–Vin
–Vin
2
+Vin
+Vin
3
CTRL
CTRL
5
NC
NC
6
+Vout
+Vout
7
–Vout
Com
8
NC*
–Vout
NC = No Connection
Control Pin Input Current:
10mA
Voltage Set Point Accuracy
with external input/output
capacitors refer to
recommended test circuit:
typ. ± 1%
max. ±2%
Control Pin (CTRL) Input
Current, control voltage
applied via 1K resistor,
output voltage must
reduce to 0V:
typ. 3mA
max. 6mA
Pin 3 (CTRL)
This pin provides an Off function which puts the
converter into a low power mode. When the pin
is ‘high’ the converter is OFF and when the pin
is high ‘Z’ the converter is ON. There is no allowed low state for this pin. Voltage to be applied
via a limiting resistor with a recommended
value of 1K for RS-05xx; 3.3K for RS-12xx; RS24xx and 10K for RS-48xx).
NC* = NC, but no external Connection allowed.
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin 5 (NC)
This pin is used internally and must have no
external connection.
Pin 8 (NC*)
No external connection allowed.
Application circuit
+Vin
Remote ON/OFF
ON: open or high impedance.
OFF: 3---6mA input current applied Via 1KΩ resistor
(OFF stand by current 10mA max.)
1 KW
Ctrl
-Vin
90
+Vout
Lin
RS- types
4.7µH ~ 100µH
Cout
RS- types
22µF ~ 100µF/25V
January-2007
DC/DC
Converter
-Vout
www.recom-international.com
Features
●
Unregulated
Converters
●
●
●
●
●
●
ECONOLINE
Safety standards and approvals:
EN 60950 certified, rated for
250VAC (LVD test report)
UL-60950-1 / CSA C22.2 certified
6kVDC Isolation
UL94V-0 Package Material
Optional Continuous Short Circuit Protected
Fully Encapsulated
Efficiency to 82%
DC/DC-Converter
RV
Series
2 Watt
DIP24
Miniature
Single & Dual
Output
Selection Guide
Part Number
Input
Voltage
Rated Output
Voltage
Output Current
Full Load
(VDC)
(VDC)
(mA)
RV-xx3.3S
3.3, 5, 9, 12, 15, 24
3.3
600
RV-xx05S
3.3, 5, 9, 12, 15, 24
5
400
RV-xx09S
3.3, 5, 9, 12, 15, 24
9
222
RV-xx12S
3.3, 5, 9, 12, 15, 24
12
167
RV-xx15S
3.3, 5, 9, 12, 15, 24
15
133
RV-xx24S
3.3, 5, 9, 12, 15, 24
24
83
RV-xx3.3D
3.3, 5, 12, 15, 24
±3.3
±300
RV-xx05D
3.3, 5, 12, 15, 24
±5
±200
RV-xx09D
3.3, 5, 12, 15, 24
±9
±111
RV-xx12D
3.3, 5, 12, 15, 24
±12
±83
RV-xx15D
3.3, 5, 12, 15, 24
±15
±67
DIP24 (SMD) Miniature
RV-xx24D
3.3, 5, 12, 15, 24
±24
xx = Input Voltage
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RV-0505S/P, RV-0505D/P
±42
EN-60950-1 Certified
UL-60950-1 Certified
EN-60601-1 Certified
Specifications (Core Operating Area)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
200mVp-p max.
Operating Frequency
70% min. / 75% typ.
No Load Power Consumption
282mW min. / 338mW typ. / 430mW max.
(tested for 1 second)
(long term isolation)
2pF min. / 12pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
80
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
95% RH
Package Weight
}
100
6000VDC min.
see Application Notes
Isolation Capacitance
MTBF (+25°C)
(+85°C)
(Ambient Temperature)
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
Derating-Graph
Output Power (%)
Load Voltage Regulation
(10% to 100% full load)
9g
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
using MIL-HDBK 217F
using MIL-HDBK 217F
July-2006
3
1154 x 10 hours
168 x 103 hours
91
ECONOLINE
RV
Series
DC/DC-Converter
Typical Characteristics
RV-xx09S
RV-xx05S
Efficiency / Load
Efficiency / Load
1205
80
40%
20%
80%
60%
5.000
0.000
1205
-5.000
0% 20%
40%
60%
Total Output current (%)
80%
5.000
0.000
1209
-5.000
-10.000
RV-xx15S
0% 20%
40%
60%
Total Output current (%)
100
100%
0.000
0515
Efficiency %
40
20
40%
80%
60%
-10.000
100
1205
40
40
20
0%
40%
20%
80%
60%
100%
20.000
Deviation from Nominal (%)
10.000
5.000
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
20.000
10.000
5.000
-5.000
-10.000
40%
60%
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
20%
Deviation / Load
0505
15.000
0.000
0%
25.000
20.000
0515
0509
Total Output current (%)
25.000
15.000
0
Deviation / Load
Deviation / Load
25.000
1209
20
Total Output current (%)
Total Output current (%)
100%
80
60
0
0% 20%
40%
60%
Total Output current (%)
RV-xx09D
60
100%
80%
1212
-5.000
Efficiency / Load
0505
80
60
20%
80%
0512
5.000
Efficiency %
80
100%
10.000
RV-xx05D
1215
80%
60%
15.000
Efficiency / Load
100
40%
20%
20.000
0509
10.000
100%
0%
Deviation / Load
15.000
Efficiency / Load
0%
0
25.000
Deviation from Nominal (%)
10.000
Efficiency %
100%
Total Output current (%)
20.000
0505
Deviation from Nominal (%)
Deviation from Nominal (%)
20.000
Deviation from Nominal (%)
80%
60%
25.000
15.000
92
40%
20%
Deviation / Load
Deviation / Load
-10.000
0%
20
Total Output current (%)
25.000
-5.000
Efficiency %
0
100%
0512
40
20
Total Output current (%)
0.000
60
0509
Deviation from Nominal (%)
Efficiency %
Efficiency %
0%
1212
80
40
20
0
1209
60
0505
40
100
80
60
-10.000
Efficiency / Load
100
100
0
RV-xx12S
1205
0% 20%
40%
60%
Total Output current (%)
July-2006
80%
100%
15.000
0509
10.000
5.000
0.000
-5.000
-10.000
1209
www.recom-international.com
ECONOLINE
RV
Series
DC/DC-Converter
Typical Characteristics
RV-xx15D
RV-xx12D
Efficiency / Load
Efficiency / Load
100
100
1212
80
60
60
0512
20
0%
40%
20%
80%
60%
20
0
100%
40%
20%
60%
80%
100%
80%
100%
Deviation / Load
Deviation / Load
25.000
25.000
20.000
20.000
0512
15.000
Deviation from Nominal (%)
Deviation from Nominal (%)
0%
Total Output current (%)
Total Output current (%)
10.000
5.000
0.000
1212
-5.000
-10.000
0515
40
Efficiency %
Efficiency %
40
0
1215
80
0% 20%
40%
60%
Total Output current (%)
80%
0515
15.000
10.000
5.000
0.000
1215
-5.000
-10.000
100%
0% 20%
40%
60%
Total Output current (%)
Package Style and Pinning (mm)
3rd angle
projection
24 PIN DIP Miniature Package Style
Single & Dual Output
14.70
2.54 x 11
RECOM
RV-0505S
11.40
****
4.10
0.60
0.25
15.24
0.50±0.05
1 2
8 9 10 11 12
Bottom View
16.10
24 23
Pin Connections
1.0ø+0.15/–0
2.54
17 16 15 14 13
8 9 10 11 12
1 2
16.95 max.
Recommended Footprint Details
32.35 max.
17 16 15 14 13
24 23
Pin Connections
Single
Pin #
Dual
1
+Vin
1
+Vin
2
8, 9, 11, 14
-Vin
NC
2
-Vin
8, 17
-Vout
Pin #
10, 15
-Vout
12 & 13
+Vout
2.54 16, 17, 23, 24
NC
NC = No Connection
Top View
www.recom-international.com
July-2006
9, 11, 14,16, 23, 24
NC
10 & 15
Com
12, 13
+Vout
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
93
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
2.2W DIP Package
1kVDC Isolation
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Internal SMD design
100% Burned In
Efficiency to 75%
DC/DC-Converter
REC2.2S_DR/H1
Series
2.2 Watt
DIP24 & SMD
Single & Dual
Output
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Max Cap.
Load
(µF)
Output
Current
(mA)
REC2.2-xx3.3SR/H1
5, 12, 24, 48
3.3
1000
600
REC2.2-xx05SR/H1
5, 12, 24, 48
5
470
440
REC2.2-xx09SR/H1
5, 12, 24, 48
9
220
244
REC2.2-xx12SR/H1
5, 12, 24, 48
12
120
183
REC2.2-xx15SR/H1
5, 12, 24, 48
15
100
146
REC2.2-xx05DR/H1
5, 12, 24, 48
±5
±220
±220
REC2.2-xx09DR/H1
5, 12, 24, 48
±9
±100
±122
REC2.2-xx12DR/H1
5, 12, 24, 48
±12
±68
±92
REC2.2-xx15DR/H1
5, 12, 24, 48
±15
±47
±73
UL-60950-1 Certified
xx = Input Voltage
* add suffix "/SMD" for SMD package, e.g. REC2.2-0505SR/H1/SMD
* add suffix "/M" for Metal Case, e.g. REC2.2-0505SR/H1/M
Specifications (Core Operating Area)
Input Voltage Range
±15%
Output Voltage Accuracy
±3% typ.
Line Voltage Regulation
±0.5% max
Load Voltage Regulation (10% to 100% full load )
±1% max.
Output Ripple and Noise (at 20MHz BW)
75kHz min.
Efficiency at Full Load
65% min.
No Load Power Consumption
(Ambient Temperature)
200mW max.
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
100
Isolation Capacitance
30pF typ.
80
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range (free air convection)
-40°C to +80°C (see Graph)
Storage Temperature Range
-50°C to +125°C
Relative Humidity
95% RH
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+80°C)
94
}
Output Power (%)
Isolation Voltage
Rated Working Voltage
Derating-Graph
100mVp-p max.
Operating Frequency
60
40
30
20
0
Safe Operating Area
-40
0
50
80
Operating Temperature °C
100
150
12g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
1000 x 10 hours
using MIL-HDBK 217F
150 x 103 hours
January-2007
www.recom-international.com
ECONOLINE
REC2.2-S_DR/H1
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
24 PIN DIP Package
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2 3
10 11 12
Bottom View
24 23 22
2.54
15 14 13
2.54
Pin #
Single
1
+Vin
Dual
+Vin
2
No Pin
–Vout
Com
3
No Pin
10
–Vout
Com
11
+ Vout
+ Vout
12
–Vin
–Vin
13
–Vin
–Vin
14
+ Vout
+ Vout
15
–Vout
Com
22
No Pin
Com
23
No Pin
–Vout
24
+Vin
+Vin
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
24 PIN DIP SMD Package
32.00
20.32
11.20
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning.
10.90
1.50
2.54
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
1.60
0.50
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
24.14
16 15 14 13
24 23 22 21 20
25.40
www.recom-international.com
Top View
1
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
27.94
January-2007
95
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
2.2W DIP Package
1kVDC, 2kVDC & 3kVDC Isolation Options
Regulated Output
Wide Input Range 2 : 1 and 4 : 1
UL94V-0 Package Material
Continuous Short Circuit Protection
Cost Effective
100% Burned In
Efficiency to 84%
Selection Guide
Part
Input
Number
Output Max Cap. Output
Voltage
Voltage
Load
Current
(VDC)
(VDC)
(µF)
(mA)
REC2.2-xx3.3SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
3.3
1000
600
REC2.2-xx05SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
5
470
440
REC2.2-xx09SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
9
220
244
REC2.2-xx12SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
12
120
183
REC2.2-xx15SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
15
100
146
REC2.2-xx3.3DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±3.3
±470
±300
REC2.2-xx05DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±5
±220
±220
REC2.2-xx09DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±9
±100
±122
REC2.2-xx12DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±12
±68
±91
REC2.2-xx15DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±15
±47
±73
REC2.2-xx3.3SRWZ/H*
9 - 36, 18 - 72
3.3
1000
600
REC2.2-xx05SRWZ/H*
9 - 36, 18 - 72
5
470
440
REC2.2-xx09SRWZ/H*
9 - 36, 18 - 72
9
220
244
REC2.2-xx12SRWZ/H*
9 - 36, 18 - 72
12
120
183
REC2.2-xx15SRWZ/H*
9 - 36, 18 - 72
15
100
146
REC2.2-xx3.3DRWZ/H*
9 - 36, 18 - 72
±3.3
±470
±300
REC2.2-xx05DRWZ/H*
9 - 36, 18 - 72
±5
±220
±220
REC2.2-xx09DRWZ/H*
9 - 36, 18 - 72
±9
±100
±122
REC2.2-xx12DRWZ/H*
9 - 36, 18 - 72
±12
±68
±91
REC2.2-xx15DRWZ/H*
9 - 36, 18 - 72
±15
±47
±73
DIP24 (SMD)
2:1 Input
(REC2.2-S/DRW/H*)
xx = 4.5-9Vin = 05
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-72Vin = 48
4:1 Input
(REC2.2-S/DRWZ/H*)
xx = 9-36Vin = 24
xx = 18-72Vin = 48
ECONOLINE
DC/DC-Converter
REC2.2S_DRW(Z)
/H* Series
2.2 Watt
DIP24 & SMD
Single & Dual
Output
EN-60601-1 Certified
(Suffix H3)
UL-60950-1 Certified
* use suffix /H1 for 1kVDC Isolation, /H2 for
2kVDC Isolation or /H3 for 3kVDC Isolation.
* add suffix "/A", "/B" or "/C" for Pinning, see
next page
* add suffix "/M" for metal case
* add suffix "/SMD" for SMD package
e.g. REC2.2-2412SRW/H1/A/M = / Pinout
"A"
with metal case
Notes:
If the options "/M" for metal case and "/SMD" for SMD pinout are combined the maximum allowed isolation
voltage is 2kVDC because of the shorter distances between the pins and the metal-case so the only available
SMD-option in metal-case is "/H2". DIP-24 through-hole case and SMD-plastic case are not affected and
offer the full isolation barriers of 2kVDC for "/H2" option and 3kVDC for "/H3".
The /H2 and /H3 Version is not available in B Pinning.
96
26-April-2007
www.recom-international.com
ECONOLINE
REC2.2-S_DRW(Z)/H*
Series
DC/DC-Converter
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
Output Voltage Accuracy
Derating-Graph
±1% max.
Line Regulation (HL-LL)
2:1 Input types
±0.2% max.
4:1 Input types
±0.2% max.
Load Regulation (for output load current change from 20% to 100%)
(Ambient Temperature)
±0.5% max.
Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW)
50mVp-p max.
Switching Frequency at Full Load
2:1 Input types90kHz min. / 150kHz max.
and nominal Input Voltage
4:1 Input types
120kHz min. / 180kHz max.
Pi Network
Efficiency at Full Load
84% max.
No Load Power Consumption
200mW typ.
Isolation Voltage
Rated Working Voltage
H1 Types
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
H2 Types
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
H3 Types
(tested for 1 second)
(long term isolation)
2:1 Input types
4:1 Input types
3000VDC min.
see Application Notes
20pF min. / 60pF max.
40pF min. / 80pF max.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range (free air convection)
60
50
40
Safe Operating Area
20
0
-40
0
50
100
85 105
150
Operating Temperature °C
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Case Material
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+85°C)
80
Output Power (%)
Input Filter
100
}
12g
Detailed Information see
Application Notes chapter "MTBF"
1102 x 103 hours
186 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
3rd angle
projection
20.30
32.00
Package A
10.20
3.81
0.51
4.60
Pin Connections
15.24
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
11
Bottom View
23 22
16
2.54
14
2.54
www.recom-international.com
Top View
26-April-2007
Pin #
Single
Dual
2
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
11
NC
–Vout
14
+Vout
+Vout
16
– Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
97
ECONOLINE
REC2.2-S_DRW(Z)/H*
Series
DC/DC-Converter
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
Package B
3rd angle
projection
20.30
32.00
/H1 Only
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2 3
10 11 12
Bottom View
24 23 22
2.54
15 14 13
Top View
2.54
Package C
Pin #
Single
1
+Vin
Dual
+Vin
2
No Pin
–Vout
Com
3
No Pin
10
–Vout
Com
11
+Vout
+ Vout
12
–Vin
–Vin
13
–Vin
–Vin
14
+Vout
+Vout
15
–Vout
Com
22
No Pin
Com
23
No Pin
–Vout
24
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
20.30
32.00
10.20
Pin Connections
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2
10 11 12
Bottom View
24 23
15
2.54
13
2.54
Pin #
Single
Dual
1
+Vin
+Vin
2
+Vin
+Vin
10
NC
Com
11
NC
Com
12
–Vout
NC
13
+ Vout
–Vout
15
NC
+Vout
23
–Vin
–Vin
24
–Vin
–Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
Mechanical drawings of DIP24 SMD case
32.00
19.90
31.40
11.20
2.54
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning. See
Notes for restrictions
on /H3 SMD versions.
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.67
Top View
24.64
24 23 22 21 20
11 x 2.54
16 15 14 13
Tol.: ± 0.35 mm
1
27.94
length of plastic case is 31,8mm, length of metal case 32.0mm
98
26-April-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
●
ECONOLINE
DIP24 Miniature Package
2:1 Wide Range Voltage Input
1kVDC Isolation
UL94V-0 Package Material
Continuous Short Circuit Protection
Less than 7mm Height
Cost Effective
Short Lead Time
No External Capacitor needed
Efficiency to 88%
DC/DC-Converter
RW-xxxxS
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
(VDC)
(VDC)
(mA)
RW-053.3S
4.5 – 9
3.3
650
RW-0505S
4.5 – 9
5
600
RW-0509S
4.5 – 9
9
333
RW-0512S
4.5 – 9
12
250
RW-0515S
4.5 – 9
15
200
RW-123.3S
9 – 18
3.3
650
RW-1205S
9 – 18
5
600
RW-1209S
9 – 18
9
333
RW-1212S
9 – 18
12
250
RW-1215S
9 – 18
15
200
RW-243.3S
18 – 36
3.3
650
RW-2405S
18 – 36
5
600
RW-2409S
18 – 36
9
333
RW-2412S
18 – 36
12
250
RW-2415S
18 – 36
15
200
RW-483.3S
36 – 72
3.3
650
RW-4805S
36 – 72
5
600
RW-4809S
36 – 72
9
333
RW-4812S
36 – 72
12
250
RW-4815S
36 – 72
15
200
DIP24 Miniature
3 Watt
DIP24/SMD
Low Profile
Package
Single Output
* add suffix "/SMD" for SMD package, e.g. RW-2405S/SMD
Description
The RW series with 2:1 input voltage ranges and max. height of 7,0 mm has been designed for the telecom and industrial automation markets. They are particularly aimed at applications where pcb-space is at a premium, still requiring industrial standard pinning. SMD pinning is also available. The converters supply the full 3
Watts without additional heat-sinks over the temperature range -40°C to +80°C.
www.recom-international.com
July-2006
99
RW-xxxxS
Series
ECONOLINE
DC/DC-Converter
Specifications (Core Operating Area)
Input Voltage Range
2:1
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
±0.2% typ.
Load Voltage Regulation (10% to 100% full load)
±0.5% max.
Output Ripple and Noise (20MHz limited)
70mVp-p max.
Operating Frequency
85kHz min. / 100kHz typ.
Efficiency at Full Load
250mW max.
(tested for 1 second)
(long term isolation)
Isolation Capacitance
40pF min. / 60pF max.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range (free air convection)
-40°C to +80°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
DIP24
Detailed Information see
Application Notes chapter "MTBF"
80
67
60
40
25
20
0
Safe Operating Area
50 80
150
95 110
Operating Temperature °C
-40
0
7g
SMD
}
100
1000VDC min.
see Application Notes
Output Power (%)
Isolation Voltage
Rated Working Voltage
(+80°C)
(Ambient Temperature)
65% min.
No Load Power Consumption
MTBF (+25°C)
Derating-Graph
7.7g
using MIL-HDBK 217F
1034 x 103 hours
using MIL-HDBK 217F
186 x 103 hours
Standard Application Circuit
Lin
RW- types
4.7uH ~ 100uH
Cout
RW- types
22uF ~ 100uF/25V
Lin
+Vin
11, 14
1, 24
DC/DC
Converter
Cout
10, 15
12, 13
-Vin
+Vout
0V
use low ESR capacitor Cout and input
inductor Lin to reduce output ripple and
input inrush current.
RW-types
5
4
Output Power (W)
3
2
1
0
4.5 5
6
7
8
9
Input Voltage (V)
100
July-2006
www.recom-international.com
RW-xxxxS
Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
24 PIN DIP Miniature Package Style
14.73
24
15 14 13
RECOM
RW-0505S
7.0
0.5
4.1 min.
****
16.35
1
2.54 x 11
Recommended Footprint Details
1.00 ø+0.15/–0
32.26
1
10 11 12
Pin Connections
2.54
2.54
Bottom View
Pin #
Single
1 & 24
+Vin
10 & 15
-Vout
11 & 14
+Vout
12 & 13
-Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
15 14 13
24
10 11 12
Top View
24 PIN SMD Miniature Package Style
14.50
32.20
9.40
10.20
2.54
8.89
18.80
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
Pin Connections
Pin #
1.54
2.03
10 11 12
1 2 3
16.0
Bottom View
17.24
15 14 13
24 23 22 21
Top View
19.27
11 x 2.54
www.recom-international.com
1
Single
1 & 24
+Vin
10 & 15
-Vout
11 & 14
+Vout
12 & 13
-Vin
others
NC
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
27.94
July-2006
101
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
●
●
●
ECONOLINE
DIP24 Miniature Package
2:1 Wide Range Voltage Input
3kVDC Isolation
UL94V-0 Package Material
Continuous Short Circuit Protection
Low profile 7mm Height
Cost Effective
Short Lead Time
No External Capacitor needed
Full SMD Construction
100% Burned In
Efficiency to 85%
DC/DC-Converter
RW-xxxxD
Series
3 Watt
DIP24 low
Profile package
Dual Regulated
Output
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Efficiency
(VDC)
(VDC)
(mA)
%
RW-0505D
4.5 – 9
±5
±300
71
RW-0509D
4.5 – 9
±9
±167
73
RW-0512D
4.5 – 9
±12
±125
74
RW-0515D
4.5 – 9
±15
±100
75
RW-1205D
9 – 18
±5
±300
76
RW-1209D
9 – 18
±9
±167
80
RW-1212D
9 – 18
±12
±125
83
RW-1215D
9 – 18
±15
±100
83
RW-2405D
18 – 36
±5
±300
78
RW-2409D
18 – 36
±9
±167
81
RW-2412D
18 – 36
±12
±125
85
RW-2415D
18 – 36
±15
±100
85
RW-4805D
36 – 72
±5
±300
78
RW-4809D
36 – 72
±9
±167
82
RW-4812D
36 – 72
±12
±125
84
RW-4815D
36 – 72
±15
±100
84
DIP24 Miniature
EN-60950-1 Certified
EN-60601-1 Certified
Description
The RW series with 2:1 input voltage ranges and max. height of 7,0 mm has been designed for the telecom - and
industrial automation markets. They are particularly aimed at applications where pcb-space is at a premium, still
requiring industrial standard pinning. The converters supply the full 3 Watts without additional heat-sinks over the
temperature range -40°C to +85°C.
Derating-Graph
(Ambient Temperature)
Specifications (Core Operating Area)
2:1
Output Voltage Accuracy
±1% typ. / ±2% max.
Line Voltage Regulation
0.1% typ. / 0.2% max.
Load Voltage Regulation (10% to 100% full load)
0.2% typ. / 0.5% max.
Output Ripple and Noise (20MHz limited)
50mVp-p max.
Operating Frequency
100KHz min. / 150kHz typ.
Efficiency at Full Load
No Load Power Consumption
Isolation Voltage
Rated Working Voltage
See above
(tested for 1 second)
(long term isolation)
250mW max.
3000VDC min.
see Application Notes
3W
100
Output Power (%)
Input Voltage Range
80
2W
60
40
1W
20
0
Safe Operating Area
-40
0
50
Operating Temperature °C
85 100
90
95
150
continued on next page
102
July-2006
www.recom-international.com
RW-xxxxD
Series
ECONOLINE
DC/DC-Converter
Specifications (Core Operating Area)
Isolation Capacitance
20pF min. / 40pF typ. / 60pF max.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range (free air convection)
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Case Material
Non-Conductive Black Plastic
Potting Material
Epoxy ( UL94V-0 )
Relative Humidity
95% RH
Package Weight
MTBF (+25°C)
(+85°C)
7.7g
}
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
1636 x 103 hours
using MIL-HDBK 217F
303 x 103 hours
Package Style and Pinning (mm)
24 PIN DIP Miniature Package Style
3rd angle
projection
17.50
32.00
7.00
RECOM
RW-1205D
3.81
15.24
0.51
4.60
****
Recommended Footprint Details
Pin Connections
1.00 ø+0.15/–0
2 3
9
Pin
11
Bottom View
23 22
16
2.54
14
2.54
Dual
2&3
-Vin
9 & 16
Com
11
-Vout
14
+Vout
22 & 23
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
Note: pinout is the same like REC-series, A-pinout
RW-xx15D
To measure the output ripple & noise use short runs with a 0.1uF/50V capacitor
20MHz BW limit, nominal input and full load. Please see below:
Efficiency / Load
100
0.1uF
+Vin
2415
80
+Vout
60
-Vin
Ground Ring
Com
Efficiency %
DC/DC
Converter
4815
40
20
0
0%
20%
40%
60%
80%
100%
Total Output current (%)
www.recom-international.com
July-2006
103
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
3W DIP Package
1kVDC Isolation
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Internal SMD design
100% Burned In
Efficiency to 75%
DC/DC-Converter
REC3S_DR/H1
Series
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Max Cap.
Load
(µF)
Output
Current
(mA)
REC3-xx3.3SR/H1
5, 12, 24, 48
3.3
2200
800
REC3-xx05SR/H1
5, 12, 24, 48
5
1000
600
REC3-xx09SR/H1
5, 12, 24, 48
9
470
333
REC3-xx12SR/H1
5, 12, 24, 48
12
220
250
REC3-xx15SR/H1
5, 12, 24, 48
15
120
200
REC3-xx05DR/H1
5, 12, 24, 48
±5
±470
±300
REC3-xx09DR/H1
5, 12, 24, 48
±9
±220
±167
REC3-xx12DR/H1
5, 12, 24, 48
±12
±100
±125
REC3-xx15DR/H1
5, 12, 24, 48
±15
±68
±100
xx = Input Voltage
3 Watt
DIP24 & SMD
Single & Dual
Output
UL-60950-1 Certified
* add suffix "/SMD" for SMD package, e.g. REC3-0505SR/H1/SMD
* add suffix "/M" for Metal Case, e.g. REC3-0505SR/H1/M
Specifications (Core Operating Area)
Input Voltage Range
±15%
Output Voltage Accuracy
±3% typ.
Line Voltage Regulation
±0.5% max
Load Voltage Regulation (10% to 100% full load )
±1% max.
Output Ripple and Noise (at 20MHz BW)
100mVp-p max.
Operating Frequency
75kHz min.
Efficiency at Full Load
65% min.
No Load Power Consumption
300mW max.
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
Isolation Capacitance
30pF typ.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous
Operating Temperature Range (free air convection)
-40°C to +80°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+80°C)
104
}
(Ambient Temperature)
100
80
(2W) 67
60
(1.5W) 50
40
Output Power (%)
Isolation Voltage
Rated Working Voltage
Derating-Graph
20
0
Safe Operating Area
100
80 105
96
Operating Temperature °C
-40
0
50
150
12g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
950 x 10 hours
using MIL-HDBK 217F
145 x 103 hours
26-April-2007
www.recom-international.com
ECONOLINE
REC3-S_DR/H1
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
24 PIN DIP Package
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2 3
10 11 12
Bottom View
24 23 22
2.54
15 14 13
2.54
Pin #
Single
1
+Vin
Dual
+Vin
2
No Pin
–Vout
Com
3
No Pin
10
–Vout
Com
11
+Vout
+Vout
12
–Vin
–Vin
13
–Vin
–Vin
14
+Vout
+Vout
15
–Vout
Com
22
No Pin
Com
23
No Pin
–Vout
24
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
24 PIN DIP SMD Package
32.00
20.32
11.20
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning.
10.90
1.50
2.54
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
1.60
0.50
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
24.14
16 15 14 13
24 23 22 21 20
25.40
www.recom-international.com
Top View
1
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
27.94
26-April-2007
105
Features
Regulated
Converters
●
●
●
●
●
●
●
●
Regulated Output
1kVDC, 2kVDC & 3kVDC Isolation Options
Continuous Short Circuit Protection
Auto-Restarting
Wide Input 2:1 & 4:1
UL94V-0 Package Material
Cost Effective
100% Burned In
Efficiency to 86%
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
VDC)
Output
Voltage
(VDC)
REC3-xx3.3SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
3.3
2200
900
66-76
REC3-xx05SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
5
1000
600
71-79
REC3-xx09SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
9
470
330
74-83
REC3-xx12SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
12
220
250
75-85
REC3-xx15SRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
15
120
200
75-86
REC3-xx05DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±5
±470
±300
74-83
REC3-xx09DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±9
±220
±165
81-84
REC3-xx12DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±12
±100
±125
75-85
REC3-xx15DRW/H*
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±15
±68
±100
75-86
REC3-xx3.3SRWZ/H*
9 - 36, 18 - 72
3.3
2200
900
77-79
REC3-xx05SRWZ/H*
9 - 36, 18 - 72
5
1000
600
78-80
REC3-xx09SRWZ/H*
9 - 36, 18 - 72
9
470
330
80-83
REC3-xx12SRWZ/H*
9 - 36, 18 - 72
12
220
250
83-85
REC3-xx15SRWZ/H*
9 - 36, 18 - 72
15
120
200
83-85
REC3-xx05DRWZ/H*
9 - 36, 18 - 72
±5
±470
±300
77-80
REC3-xx09DRWZ/H*
9 - 36, 18 - 72
±9
±220
±165
81-84
REC3-xx12DRWZ/H*
9 - 36, 18 - 72
±12
±100
±125
83-85
REC3-xx15DRWZ/H*
9 - 36, 18 - 72
±15
±68
±100
83-85
2:1 Input
(REC3-S/DRW/H*)
xx = 4.5-9Vin = 05
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-72Vin = 48
4:1 Input
(REC3-S/DRWZ/H*)
xx = 9-36Vin = 24
xx = 18-72Vin = 48
Max Cap. Output
Load
Current
(µF)
(mA)
Efficiency
ECONOLINE
DC/DC-Converter
REC3S_DRW(Z)/
H* Series
3 Watt
DIP24 & SMD
Single & Dual
Output
(%)
EN-60950-1 Certified
EN-60601-1 Certified
(Suffix H3)
UL-60950-1 Certified
* use suffix /H1 for 1kVDC Isolation, /H2 for
2kVDC Isolation or /H3 for 3kVDC Isolation.
* add suffix "/A", "/B" or "/C" for Pinning, see next
page
* add suffix "/M" for metal case
* add suffix "/SMD" for SMD package
e.g. REC3-2412SRW/H1/A/M = 1kVDC isol.
/ Pinout "A" / metal case
Notes:
If the options "/M" for metal case and "/SMD" for SMD pinout are combined the maximum allowed isolation
voltage is 2kVDC because of the shorter distances between the pins and the metal-case so the only available
SMD-option in metal-case is "/H2". DIP-24 through-hole case and SMD-plastic case are not affected and
offer the full isolation barriers of 2kVDC for "/H2" option and 3kVDC for "/H3".
The /H2 and /H3 Version is not available in "/B" Pinning.
106
26-April-2007
www.recom-international.com
ECONOLINE
REC3-S_DRW(Z)/H*
Series
DC/DC-Converter
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
2:1 Input types
4:1 Input types
Load Regulation (for output load current change from 20% to 100%)
Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW)
Switching Frequency at Full Load
2:1 Input types
and nominal Input Voltage
4:1 Input types
50mVp-p max.
90kHz min. / 150kHz max.
120kHz min. / 180kHz max.
Network
Efficiency at Full Load
see above
No Load Power Consumption
300mW max.
Isolation Voltage
Rated Working Voltage
H1 types
tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
H2 types
(tested for 1 second)
(long term isolation)
2000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
H3 types
(tested for 1 second)
(long term isolation)
2:1 Input types
4:1 Input types
3000VDC min.
see Application Notes
20pF min. / 60pF max.
40pF min. / 80pF max.
Vin = 5V
1 GΩ min.
Short Circuit Protection
Operating Temperature Range
(free air convection)
5V input types
others
Continuous, Auto Restart
-40°C to +80°C (see Graph)
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Case Material
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
13g
Detailed Information see
Application Notes chapter "MTBF"
Output Power (%)
Isolation Resistance
}
(Ambient Temperature)
±0.6% max.
Input Filter
MTBF (+25°C)
(+85°C)
Derating-Graph
±2% max.
±0.3% max.
±0.3% max.
Output Power (%)
Output Voltage Accuracy
Line Regulation (HL-LL)
120
100
80
60
50
40
20
0
-40
Safe Operating Area
100
125
50 75
80 105
Operating Temperature (°C)
120
100
80
60
50
40
20
0
-40
0
25
Safe Operating Area
0
25
50 75
Operating Temperature (°C)
100
85 105
125
1043 x 103 hours
186 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
Package A
3rd angle
projection
20.30
32.00
10.20
Pin Connections
3.81
0.51
4.60
15.24
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
11
Bottom View
23 22
16
2.54
14
2.54
www.recom-international.com
Top View
26-April-2007
Pin #
Single
Dual
2
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
11
NC
–Vout
14
+Vout
+Vout
16
–Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
107
ECONOLINE
REC3-S_DRW(Z)/H*
Series
DC/DC-Converter
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
3rd angle
projection
Package B
32.00
20.30
/H1 Only
10.20
Pin #
Single
1
+Vin
+Vin
3.81
2
No Pin
–Vout
15.24
0.51
2.06
Pin Connections
Recommended Footprint Details
1.00 ø+0.15/–0
1 2 3
10 11 12
Bottom View
24 23 22
2.54
15 14 13
Package C
3
No Pin
Com
10
–Vout
Com
11
+Vout
+Vout
12
–Vin
–Vin
13
–Vin
–Vin
14
+Vout
+Vout
15
–Vout
Com
22
No Pin
Com
23
No Pin
–Vout
24
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
2.54
Dual
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2
10 11 12
Bottom View
24 23
15
2.54
13
2.54
Pin #
Single
Dual
1
+Vin
+Vin
2
+Vin
+Vin
10
NC
Com
11
NC
Com
12
–Vout
NC
13
+Vout
–Vout
15
NC
+Vout
23
–Vin
–Vin
24
–Vin
–Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
Mechanical drawings of DIP24 SMD case
32.00
19.90
31.40
11.20
2.54
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning. See
Notes for restrictions
on /H3 SMD versions.
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.67
Top View
24.64
24 23 22 21 20
11 x 2.54
16 15 14 13
1
Tol.: ± 0.35 mm
27.94
length of plastic case is 31,8mm, length of metal case 32.0mm
108
26-April-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
ECONOLINE
3W DIP Package Isolated Dual Outputs
Vout1 / Vout2
Input / Output 2KVDC Isolation min.
UL94V-0 Package Material
Continuous Short Circuit Protection
Auto-Restarting (V1)
Wide Input 2:1
Internal SMD design
100% Burned In
DC/DC-Converter
REC3DRWI/A
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Voltage
Output
Current
DIP24
(VDC)
Vout1(VDC)
at Vout1(mA)
REC3-050505DRWI/A
4.5-9
5
300*
5
300
REC3-050509DRWI/A
4.5-9
5
300*
9
167
REC3-050512DRWI/A
4.5-9
5
300*
12
125
REC3-050515DRWI/A
4.5-9
5
300*
15
100
REC3-120505DRWI/A
9-18
5
300*
5
300
REC3-120509DRWI/A
9-18
5
300*
9
167
REC3-120512DRWI/A
9-18
5
300*
12
125
REC3-120515DRWI/A
9-18
5
300*
15
100
REC3-240505DRWI/A
18-36
5
300*
5
300
REC3-240509DRWI/A
18-36
5
300*
9
167
REC3-240512DRWI/A
18-36
5
300*
12
125
REC3-240515DRWI/A
18-36
5
300*
15
100
REC3-480505DRWI/A
36-72
5
300*
5
300
REC3-480509DRWI/A
36-72
5
300*
9
167
REC3-480512DRWI/A
36-72
5
300*
12
125
REC3-480515DRWI/A
36-72
5
300*
15
100
Vout2(VDC) at Vout2(mA)
3 Watt
DIP24
Isolated
Dual Output
EN-60950-1 Certified
EN-60601-1 Certified
UL-60950-1 Certified
* V1 min. load 100mA to supply V2 well
* add suffix "/M" for Metal Case, e.g. REC3-240505DRWI/A/M
For alternative custom output voltage and power combinations, please contact Recom Technical Support
Specifications (Core Operating Area)
Input Voltage Range
2:1
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
±0.4% max.
Load Voltage Regulation (10% to 100% full load )
±0.6% max.
Output Ripple and Noise (at 20MHz BW)
50mVp-p max.
Operating Frequency
100kHz typ.
No Load Power Consumption
Isolation Voltage
Input / Output (tested for 1 second)
Vout1 / Vout2 (tested for 1 second)
Rated Working Voltage
(long term isolation)
300mW max.
2000VDC min.
500VDC min.
see Application Notes
Isolation Capacitance
40pF typ.
Isolation Resistance
1 GΩ min.
Short Circuit Protection (V1)
Continuous
Operating Temperature Range
Vin=5V
-40°C to +80°C (see Graph)
(free air convection)
Vin=12, 24, 48V
-40°C to +85°C (see Graph)
Storage Temperature Range
-55°C to +125°C
continued on next page
www.recom-international.com
26-April-2007
109
ECONOLINE
REC3-DRWI/A
Series
DC/DC-Converter
Specifications (Core Operating Area)
Relative Humidity
95% RH
Case Material
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+80°C)
13g
Detailed Information see
Application Notes chapter "MTBF"
3
using MIL-HDBK 217F
877 x 10 hours
using MIL-HDBK 217F
138 x 103 hours
Derating-Graph
(Ambient Temperature)
Vin = 5V
Vin = 12, 24, 48V
100
100
20
0
80
(2W) 67
60
(1.5W) 50
40
Safe Operating Area
100
80 105
96
Operating Temperature °C
-40
0
50
Output Power (%)
Output Power (%)
80
(2W) 67
60
(1.5W) 50
40
150
Safe Operating Area
20
0
100
85 105
98
Operating Temperature °C
-40
0
50
150
Package Style and Pinning (mm) Wide Input 2:1
3rd angle
projection
24 PIN DIP Package
20.30
32.00
Pin Connections
10.20
3.81
0.51
4.60
15.24
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
11
16
14
–Vin
3
–Vin
9
+Vout 2
11
–Vout 2
14
+Vout 1
16
–Vout 1
22
+Vin
23
+Vin
2.54
2.54
110
Dual
2
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Bottom View
23 22
Pin #
Top View
26-April-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
●
ECONOLINE
UL-60950-1 / CSA C22.2 certified
3W DIP Package
4kVDC & 6kVDC Isolation
Regulated Output
Continuous Short Circuit Protection
Auto-Restarting
Wide Input 2:1 & 4:1
UL94V-0 Package Material
Cost Effective
100% Burned In
Efficiency to 86%
DC/DC-Converter
REC3S_DRW(Z)
/H4,H6
Series
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
(VDC)
Output Max. Cap. Output Efficiency
Voltage Load
Current
(VDC)
(µF)
(mA)
(%)
REC3-xx3.3SRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
3.3
2200
900
66-76
REC3-xx05SRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
5
1000
600
71-79
REC3-xx09SRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
9
470
330
74-83
REC3-xx12SRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
12
220
250
75-85
REC3-xx15SRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
15
120
200
75-86
REC3-xx05DRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±5
±470
±300
74-83
REC3-xx09DRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±9
±220
±165
81-84
REC3-xx12DRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±12
±100
±125
75-85
REC3-xx15DRW (H4/H6)
4.5 - 9, 9 - 18, 18 - 36, 36 - 72
±15
±68
±100
75-86
REC3-xx3.3SRWZ (H4/H6)
9 - 36, 18 - 72
3.3
2200
900
77-79
REC3-xx05SRWZ (H4/H6)
9 - 36, 18 - 72
5
1000
600
78-80
REC3-xx09SRWZ (H4/H6)
9 - 36, 18 - 72
9
470
330
80-83
REC3-xx12SRWZ (H4/H6)
9 - 36, 18 - 72
12
220
250
83-85
REC3-xx15SRWZ (H4/H6)
9 - 36, 18 - 72
15
120
200
83-85
REC3-xx05DRWZ (H4/H6)
9 - 36, 18 - 72
±5
±470
±300
77-80
REC3-xx09DRWZ (H4/H6)
9 - 36, 18 - 72
±9
±220
±165
81-84
REC3-xx12DRWZ (H4/H6)
9 - 36, 18 - 72
±12
±100
±125
83-85
REC3-xx15DRWZ (H4/H6)
9 - 36, 18 - 72
±15
±68
±100
83-85
2:1 Input
(REC3-S/DRWH4/H6)
xx = 4.5-9Vin = 05
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-72Vin = 48
Description
4:1 Input
* add suffix /H4 for 4kVDC isolation or /H6
(REC3-S/DRWZ(H4/H6)) for 6kVDC isolation
xx = 9-36Vin = 24
* add suffix "/A" or "/C" for Pinning, see next page
xx = 18-72Vin = 48
“/B” Pinning is NOT available for this series !
* add suffix "/M" for metal case
* add suffix "/SMD" for SMD package
e.g. REC3-2412SRW/H4/A/M =
4kVDC isol. / Pinout “A” / metal case
This series offers high isolation of 4kVDC (= option "/H4") or 6kVDC (= option "/H6") making it ideal for medical applications and other sophisticated industrial applications. Packaging can be either DIP-24 non-conductive plastic or 5-side-shielded DIP24 metal case (= option "/M") as well as DIP24-SMD case (= option
"/SMD"). For all the above variants, 2 industry-standard pinouts
(= option "/A" or "/C") are available.
3 Watt
DIP24 & SMD
Single & Dual
Output
EN-60950-1 Certified
UL-60950-1 Certified
EN-60601-1 Certified
Notes :
1. If the options "/M" for metal case and
"/SMD" for SMD pinout are combined, the
maximum allowed isolation voltage is 2kVDC
because of the shorter distances between
pins and the metal case, so only available
SMD-option in metal-case is "/H2".
DIP-24 through-hole case and SMD-plastic
case are not affected and offer the full isolation barriers of 4kVDC for "/H4" option and
6kVDC for "/H6".
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
Output Voltage Accuracy
Line Regulation (HL-LL)
±2% max.
±0.4% max.
continued on next page
www.recom-international.com
26-April-2007
111
ECONOLINE
REC3-S_DRW(Z)
/H4,H6 Series
DC/DC-Converter
Specifications (Core Operating Area)
Load Regulation (for output load current change from 20% to 100%)
Input Filter
Pi Network
Efficiency at Full Load
see above
No Load Power Consumption
300mW max.
Isolation Voltage
Rated Working Voltage
H4 types
(see note)
(tested for 1 second)
(long term isolation)
4000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
Isolation Capacitance
H6 types
(see note)
(tested for 1 second)
(long term isolation)
2:1 Input types
4:1 Input types
6000VDC min.
see Application Notes
20pF min. / 60pF max.
40pF min. / 80pF max.
Isolation Resistance
120
100
80
60
50
40
20
0
-40
-55°C to +125°C
Relative Humidity
95% RH
Case Material
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
13g
Detailed Information see
Application Notes chapter "MTBF"
120
100
80
60
50
40
20
0
-40
Output Power (%)
5V input types
others
3
1043 x 10 hours
186 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Vin = 5V
Safe Operating Area
100
125
50 75
80 105
Operating Temperature (°C)
Continuous, Auto Restart
-40°C to +80°C (see Graph)
-40°C to +85°C (see Graph)
Storage Temperature Range
}
(Ambient Temperature)
1 GΩ min.
Short Circuit Protection
Operating Temperature Range
(free air convection)
MTBF (+25°C)
(+85°C)
Derating-Graph
50mVp-p max.
90kHz min. / 150kHz max.
120kHz min. / 180kHz max.
Output Power (%)
Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW)
Switching Frequency at Full Load
2:1 Input types
and nominal Input Voltage
4:1 Input types
±0.6% max.
0
25
Safe Operating Area
0
25
50 75
Operating Temperature (°C)
100
85 105
125
Typical Characteristics
Single 2:1 Input Single 2:1 Input
Efficiency / Load
100
100
2415
80
2409
80%
100%
Single 4:1 Input
100
2405/
H4
80
Efficiency %
80%
100%
20
0
4805/
H4
80
60
40
40
40
0
0% 20%
40%
60%
Total Output current (%)
80%
100%
20
0
483.3/
H4
0% 20%
40%
60%
Total Output current (%)
26-April-2007
80%
100%
Efficiency / Load
100
60
243.3/
H4
0% 20%
40%
60%
Total Output current (%)
Dual 4:1 Input
60
20
0512D
0515D
40
Efficiency / Load
Efficiency %
Efficiency %
0% 20%
40%
60%
Total Output current (%)
Single 4:1 Input
Efficiency / Load
112
2424
4805
20
0
1212D
60
1205
Efficiency %
Efficiency %
Efficiency %
0% 20%
40%
60%
Total Output current (%)
80
40
20
80
2418
60
2405
40
100
Efficiency / Load
100
80
60
0
Dual 2:1 Input
Efficiency / Load
80%
100%
2412D/
H4
2415D/
H4
20
0
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
REC3-S_DRW(Z)
/H4,H6Series
DC/DC-Converter
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
Package A
3rd angle
projection
20.30
32.00
10.20
Pin Connections
3.81
15.24
0.51
4.60
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
11
9
Bottom View
23 22
16
Dual
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
11
NC
–Vout
14
+Vout
+Vout
16
–Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
Top View
2.54
Package C
Single
2
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
2.54
14
Pin #
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2
10 11 12
Bottom View
24 23
15
2.54
13
2.54
Pin #
Single
Dual
1
+Vin
+Vin
2
+Vin
+Vin
10
NC
Com
11
NC
Com
12
–Vout
NC
13
+Vout
–Vout
15
NC
+Vout
23
–Vin
–Vin
24
–Vin
–Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
Mechanical drawings of DIP24 SMD case
32.00
19.90
31.40
11.20
2.54
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning.
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
Tol.: ± 0.35 mm
26.67
Top View
24.64
24 23 22 21 20
11 x 2.54
16 15 14 13
1
27.94
for all packages incl.SMD case the length of plastic case is 31,8mm, length of metal case 32.0mm
www.recom-international.com
26-April-2007
113
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
5W DIP Package
1kVDC, 2kVDC & 3kVDC Isolation Options
Regulated Output
Continuous Short Circuit Protection
Auto-Restarting
Wide Input 2:1 & 4:1
UL94V-0 Package Material
Cost Effective
100% Burned In
Efficiency to 86%
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Max. Cap.
Load
(µF)
Output
Current
(mA)
Efficiency
REC5-xx3.3SRW/H*
9 - 18, 18 - 36, 36 - 72
3.3
2200
1200
75-77
REC5-xx05SRW/H*
9 - 18, 18 - 36, 36 - 72
5
1000
1000
79-81
REC5-xx09SRW/H*
9 - 18, 18 - 36, 36 - 72
9
470
556
82-83
REC5-xx12SRW/H*
9 - 18, 18 - 36, 36 - 72
12
220
420
84-85
REC5-xx15SRW/H*
9 - 18, 18 - 36, 36 - 72
15
120
340
85-86
REC5-xx05DRW/H*
9 - 18, 18 - 36, 36 - 72
±5
±470
±500
79-81
REC5-xx09DRW/H*
9 - 18, 18 - 36, 36 - 72
±9
±270
±278
82-84
REC5-xx12DRW/H*
9 - 18, 18 - 36, 36 - 72
±12
±100
±210
84-85
REC5-xx15DRW/H*
9 - 18, 18 - 36, 36 - 72
±15
±68
±170
85-86
REC5-xx3.3SRWZ/H*
9 - 36**, 18 - 72
3.3
2200
1200
75-76
REC5-xx05SRWZ/H*
9 - 36**, 18 - 72
5
1000
1000
81-82
REC5-xx09SRWZ/H*
9 - 36, 18 - 72
9
470
556
82-83
REC5-xx12SRWZ/H*
9 - 36, 18 - 72
12
220
420
83-84
(%)
REC5-xx15SRWZ/H*
9 - 36, 18 - 72
15
120
340
84-85
REC5-xx05DRWZ/H*
9 - 36, 18 - 72
±5
±470
±500
81-82
REC5-xx09DRWZ/H*
9 - 36, 18 - 72
±9
±270
±278
82-84
REC5-xx12DRWZ/H*
9 - 36, 18 - 72
±12
±100
±210
82-83
REC5-xx15DRWZ/H*
9 - 36, 18 - 72
±15
±68
±170
84-85
2:1 Input
(REC5-S/DRW/H1)
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-72Vin = 48
ECONOLINE
DC/DC-Converter
REC5S_DRW(Z)
/H* Series
5 Watt
DIP24 & SMD
Single & Dual
Output
EN-60950-1 Certified
EN-60601-1 Certified
(Suffix H3)
UL-60950-1 Certified
4:1 Input
(REC5-S/DRWZ/H1)
xx = 9-36Vin = 24
xx = 18-72Vin = 48
Notes:
* add suffix /H1 for 1kVDC Isolation, /H2 for 2kVDC Isolation or /H3 for 3kVDC Isolation.
* /H2 and /H3 versions are not available in B Pinning.
* /H3 version is not available in /M/SMD combination.
* add suffix "/A", "/B" or "/C" for Pinning, see next page
* add suffix "/M" for metal case
* add suffix "/SMD" for SMD package
e.g. REC5-xxxxSRWZH1/A/M = 1kVDC isol. / Pinout “A” / metal case
** 24V 4:1 Wide Range Input Types (REC5-24xxS_DRWZ/H1) should be derated
Vin= 9 Vin : 3.3Vout / 1100mA max., 5Vout / 900mA max.
114
26-April-2007
www.recom-international.com
ECONOLINE
REC5-S_DRW(Z)/H*
Series
DC/DC-Converter
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
Output Voltage Accuracy
±2% max.
Line Regulation (HL-LL)
±0.3% max.
Load Regulation (for output load current change from 20% to 100%)
±0.6% max.
50mVp-p max.
120kHz typ.
200kHz typ.
Input Filter
Pi Network
Efficiency at Full Load
see above
No Load Power Consumption
Isolation Voltage H1/SMD Pinout and metal case
(tested for 1 second)
Isolation Voltage H2/SMD Pinout and metal case
(tested for 1 second)
Rated Working Voltage
(long term isolation)
Isolation Voltage
H1 types
(tested for 1 second)
Isolation Voltage
H2 types
(tested for 1 second)
Isolation Voltage
H3 types
(tested for 1 second)
Rated Working Voltage
(long term isolation)
300mW max.
1000VDC min.
2000VDC min.
see Application Notes
1000VDC min.
2000VDC min.
3000VDC min.
see Application Notes
Isolation Capacitance
60pF typ.
Isolation Resistance
1 GΩ min.
Short Circuit Protection
Continuous, Auto Restart
Operating Temperature (free air convection)
-40°C to +75°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
95% RH
Case Material
(Ambient Temperature)
100
80
(3W) 60
(2W) 40
Safe Operating Area
20
0
-40
25
0
50
75 100 125
105
95
Operating Temperature °C
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
MTBF (+25°C)
(+75°C)
Derating-Graph
Output Power (%)
Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW)
Operating Frequency at Full Load
2:1 input
(at nominal input voltage)
4:1 input
}
13g
Detailed Information see
Application Notes chapter "MTBF"
3
850 x 10 hours
206 x 103hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
3rd angle
projection
Package A
20.30
32.00
10.20
3.81
0.51
4.60
Pin Connections
15.24
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
16
Dual
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
11
NC
–Vout
14
+Vout
+Vout
16
–Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
14
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
2.54
2.54
www.recom-international.com
Single
2
11
Bottom View
23 22
Pin #
Top View
26-April-2007
115
ECONOLINE
REC5-S_DRW(Z)/H*
Series
DC/DC-Converter
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
3rd angle
projection
Package B
32.00
20.30
Pin Connections
/H1 Only
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2 3
10 11 12
Bottom View
24 23 22
2.54
15 14 13
Top View
2.54
Package C
Pin #
Single
1
+Vin
Dual
+Vin
2
No Pin
–Vout
Com
3
No Pin
10
–Vout
Com
11
+Vout
+Vout
12
–Vin
–Vin
13
–Vin
–Vin
14
+Vout
+Vout
15
–Vout
Com
22
No Pin
Com
23
No Pin
–Vout
24
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2
10 11 12
Bottom View
24 23
15
2.54
Single
Dual
1
+Vin
+Vin
2
+Vin
+Vin
10
NC
Com
11
NC
Com
12
–Vout
NC
13
+Vout
–Vout
15
NC
+Vout
23
–Vin
–Vin
24
–Vin
–Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
2.54
13
Pin #
Top View
Mechanical drawings of DIP24 SMD case
32.00
19.90
31.40
11.20
2.54
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning. See
Notes for restrictions
on /H3 SMD versions.
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
Tol.: ± 0.35 mm
26.67
Top View
24.64
24 23 22 21 20
11 x 2.54
16 15 14 13
1
27.94
length of plastic case is 31,8mm, length of metal case 32.0mm
116
26-April-2007
www.recom-international.com
●
●
●
●
●
Features
Regulated
Converters
●
●
●
●
●
ECONOLINE
UL-60950-1 / CSA C22.2 certified
5W DIP Package
4kVDC & 6kVDC Isolation
Regulated Output
Continuous Short Circuit Protection
Auto-Restarting
Wide Input 2:1 & 4:1
UL94V-0 Package Material
Cost Effective
100% Burned In
Efficiency to 86%
DC/DC-Converter
REC5S_DRW(Z)
/H4,H6
Series
Selection Guide
Part
Number
DIP24 (SMD)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Max. Cap.
Load
(µF)
Output
Current
(mA)
Efficiency
REC5-xx3.3SRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
3.3
2200
1200
75-77
REC5-xx05SRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
5
1000
1000
79-81
REC5-xx09SRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
9
470
556
82-83
REC5-xx12SRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
12
220
420
84-85
REC5-xx15SRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
15
120
340
85-86
REC5-xx05DRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
±5
±470
±500
79-81
REC5-xx09DRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
±9
±220
±278
82-84
REC5-xx12DRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
±12
±100
±210
84-85
REC5-xx15DRW (H4/H6)
9 - 18, 18 - 36, 36 - 72
±15
±68
±170
85-86
REC5-xx3.3SRWZ (H4/H6)
9 - 36**, 18 - 72
3.3
2200
1200
75-76
REC5-xx05SRWZ (H4/H6)
9 - 36**, 18 - 72
5
1000
1000
81-82
REC5-xx09SRWZ (H4/H6)
9 - 36, 18 - 72
9
470
556
82-83
REC5-xx12SRWZ (H4/H6)
9 - 36, 18 - 72
12
220
420
83-84
REC5-xx15SRWZ (H4/H6)
9 - 36, 18 - 72
15
120
340
84-85
REC5-xx05DRWZ (H4/H6)
9 - 36, 18 - 72
±5
±470
±500
81-82
REC5-xx09DRWZ (H4/H6)
9 - 36, 18 - 72
±9
±220
±278
82-84
REC5-xx12DRWZ (H4/H6)
9 - 36, 18 - 72
±12
±100
±210
82-83
REC5-xx15DRWZ (H4/H6)
9 - 36, 18 - 72
±15
±68
±170
84-85
2:1 Input (REC5-S/DRWH4/H6)
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-72Vin = 48
4:1 Input (REC5-S/DRWZ(H4/H6))
xx = 9-36Vin = 24
xx = 18-72Vin = 48
(%)
5 Watt
DIP24 & SMD
Single & Dual
Output
EN-60950-1 Certified
UL-60950-1 Certified
EN-60601-1 Certified
* add suffix "/H4" for 4kVDC isolation or "/H6" for 6kVDC isolation
* add suffix "/A" or "/C" for Pinning, see next page
* add suffix "/M" for metal case
* add suffix "/SMD" for SMD package
e.g. REC5-xxxxSRWZ/H4/A/M = 4kVDC isol. / Pinout "A" / metal case
** 24V 4:1 Wide Range Input Types (REC5-24xxS_DRWZ(/H4/H6)) should be derated
Vin= 9 Vin : 3.3Vout / 1100mA max., 5Vout / 900mA max..
Note :
If the options "/M" for metal case and "/SMD" for SMD pinout are combined the maximum allowed isolation
voltage is 2kVDC because of the shorter distances between the pins and the metal-case so the only available
SMD-option in metal-case is "/H2". DIP-24 through-hole case and SMD-plastic case are not affected and
offer the full isolation barriers of 4kVDC for "/H4" option and 6kVDC for "/H6".
Description
This series offers high isolation of 4kVDC (= option "/H4") or 6kVDC (= option "/H6") making it ideal for medical applications and other sophisticated industrial applications. Packaging can be either DIP-24 non-conductive plastic or 5-side-shielded DIP24 metal case (= option "/M") as well as DIP24-SMD case (= option
"/SMD"). For all the above variants, 2 industry-standard pinouts (= option "/A" or "/C") are available.
www.recom-international.com
26-April-2007
117
REC5-S_DRW(Z)
/H4,H6 Series
ECONOLINE
DC/DC-Converter
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
Output Voltage Accuracy
±2% max.
Line Regulation (HL-LL)
±0.3% max.
Load Regulation (for output load current change from 20% to 100%)
±0.6% max.
Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW)
Operating Frequency at Full Load
2:1 input
(at nominal input voltage)
4:1 input
50mVp-p max.
120kHz typ.
200kHz typ.
Input Filter
Pi Network
Efficiency at Full Load
see above
No Load Power Consumption
Derating-Graph
(Ambient Temperature)
300mW max.
Isolation Voltage
Rated Working Voltage
H4 types
(see note)
(tested for 1 second)
(long term isolation)
4000VDC min.
see Application Notes
Isolation Voltage
Rated Working Voltage
H6 types
(see note)
(tested for 1 second)
(long term isolation)
6000VDC min.
see Application Notes
100
60pF typ.
80
Isolation Resistance
1 GΩ min.
(3W) 60
Short Circuit Protection
Continuous, Auto Restart
Operating Temperature (free air convection)
(2W) 40
-40°C to +75°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Relative Humidity
0
Non-Conductive Plastic
Thermal Impedance
Natural convection
20°C/W for metal case
Package Weight
}
Safe Operating Area
20
95% RH
Case Material
MTBF (+25°C)
(+75°C)
Output Power (%)
Isolation Capacitance
-40
0
25
50
75 100 125
105
95
Operating Temperature °C
13g
Detailed Information see
Application Notes chapter "MTBF"
3
850 x 10 hours
206 x 103hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Typical Characteristics
Single
Single
Efficiency / Load
100
80
Efficiency / Load
1212
1209
1205
123.3
100
80
60
60
20
0
0% 20%
40%
60%
Total Output current (%)
80%
100%
20
0
80
4805
100
4812
80
483.3
Efficiency %
Efficiency %
118
4812
80%
2405
40
20
0% 20%
40%
60%
Total Output current (%)
100%
2415
1209
60
40
80%
Efficiency / Load
60
0
0% 20%
40%
60%
Total Output current (%)
Dual
Single
Efficiency / Load
100
243.3
40
Efficiency %
Efficiency %
40
2405
2412
100%
20
0
26-April-2007
1215
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-international.com
ECONOLINE
REC5-S_DRW(Z)
/H4,H6 Series
DC/DC-Converter
Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1
Package A
3rd angle
projection
20.30
32.00
10.20
Pin Connections
3.81
Pin #
Single
Dual
2
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
15.24
0.51
4.60
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
11
16
14
Bottom View
23 22
2.54
NC
–Vout
14
+Vout
+Vout
16
–Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
2.54
Package C
11
20.30
32.00
Pin Connections
10.20
3.81
15.24
0.51
2.06
Recommended Footprint Details
1.00 ø+0.15/–0
1 2
10 11 12
Bottom View
24 23
15
2.54
13
2.54
Pin #
Single
Dual
1
+Vin
+Vin
2
+Vin
+Vin
10
NC
Com
11
NC
Com
12
–Vout
NC
13
+Vout
–Vout
15
NC
+Vout
23
–Vin
–Vin
24
–Vin
–Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
Mechanical drawings of DIP24 SMD case
32.00
19.90
31.40
11.20
2.54
All unused pins are
NC (No Connection).
SMD pin connections
follow standard
package pinning.
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.67
Top View
24.64
24 23 22 21 20
11 x 2.54
16 15 14 13
Tol.: ± 0.35 mm
1
27.94
for all packages incl.SMD case the length of plastic case is 31,8mm, length of metal case 32.0mm
www.recom-international.com
26-April-2007
119
Features
Unregulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
Dual In-Line Package
1kVDC Isolation
Internal Filtering
No External Components Required
100% Burned In
UL94V-0 Package Material
Low Noise
Efficiency to 87%
DC/DC-Converter
RAA
Series
Selection Guide
Part
Number
Input
Voltage
Output
Voltage
Output
Current
Input Current
Full Load No Load
Efficiency
DIP Package
(VDC)
(VDC)
mA)
(mA)
(%)
RAA-0505S
5
5
1000
1250
80
80
RAA-0512S
5
12
417
1150
80
87
RAA-0515S
5
15
333
1150
80
87
RAA-1205S
12
5
1000
496
40
84
RAA-1212S
12
12
417
479
40
87
RAA-1215S
12
15
333
479
40
87
RAA-2405S
24
5
1000
261
20
83
RAA-2412S
24
12
417
245
20
85
RAA-2415S
24
15
333
239
20
87
RAA-0505D
5
±5
±500
1250
80
80
RAA-0512D
5
±12
±208
1150
80
87
RAA-0515D
5
±15
±167
1150
80
87
RAA-1205D
12
±5
±500
496
40
84
RAA-1212D
12
±12
±208
479
40
87
RAA-1215D
12
±15
±167
479
40
87
RAA-2405D
24
±5
±500
261
20
83
RAA-2412D
24
±12
±208
245
20
85
RAA-2415D
24
±15
±167
239
20
87
5 Watt
25.00 x 23.50mm
Single & Dual
Output
Specifications (Core Operating Area)
Voltage Setpoint Accuracy
±3% max.
Temperature Coefficient
±0.03%/°C
Ripple and Noise (20MHz BW)
100mVp-p max.
Line Regulation (for 1% change in input voltage)
±3% max.
Short Circuit Protection
±10% min.
120
100
See Selection Guide
Isolation Voltage
Rated Working Voltage
(tested for 1 second)
(long term isolation)
1000VDC min.
see Application Notes
Isolation Resistance
10 GΩ min.
Switching Frequency
50kHz typ.
Isolation Capacitance
Operating Temperature Range (free air convection)
80pF max.
-25°C to +70°C (see Graph)
Storage Temperature
-55°C to +100°C
Relative Humidity
95% RH
Case Material
Output Power (%)
Efficiency
80
60
Safe Operating Area
40
20
0
-25
0
25
50
Operating Temperature (°C)
75
70
100
Non-Conductive Plastic
Package Weight
120
(Ambient Temperature)
1 Second
Input Voltage Range
MTBF (+25°C)
(+70°C)
Derating-Graph
±1.2% max.
Load Regulation (for output load current change from 20% to 100%)
}
19.2g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
using MIL-HDBK 217F
July-2006
3
1415 x 10 hours
243 x 103hours
www.recom-international.com
ECONOLINE
RAA
Series
DC/DC-Converter
Typical Characteristics
RAA types
Tolerance Envelope
100
+10%
80
Efficiency (%)
20
40
60
80
– 2,5%
– 7,5%
Output Voltage
20
0
+2,5%
ad Line
V Nom.
40
0
Typical L
o
+5%
60
100
10%
% of Rated Load
50%
100%
Output Load Current (%)
Package Style and Pinning (mm)
3rd angle
projection
DIP Package Style
Single Output
Dual Output
25.00
25.00
10.00
10.00
4.00
4.00
Single & Dual Output
23.50
1.02ø+0.05
20.32
2.35
5
3
20.32
10.16
3
1.59
Bottom View
1
2.35
10.16
5
4
1
1.59
Bottom View
2
1
2
3
2
RECOM
RAA-0505S
****
5
5.08
5.08
1
Recommended Footprint Details
1.60ø+0.15/–0
2.54
1.60ø+0.15/–0
3
2
RECOM
RAA-0505D
****
4
5
2.54
Pin Connections
Pin #
2.54
Top View
2.54
Top View
Single
Dual
1
+Vin
+Vin
2
–Vin
Vin
3
+Vout
+Vout
4
No Pin
Com
5
–Vout
–Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
121
Regulated
Converters
●
●
●
●
●
●
●
●
●
7.5W DIP24 and SMD Package
1KVDC, 2KVDCand 3kVDC Isolation Options
UL94V-0 Package Material
Continuous Short Circuit Protection
Auto-Restarting
Wide Input Voltage Range 2:1
5 Side Shielded Metal Case
Full SMD design
100% Burned In
Efficiency to 86%
Selection Guide
Part
Number
(VDC)
Input
Voltage
(VDC)
Output
Voltage
Max. Cap.
Load
(µF)
Output
Current
(mA)
Efficiency
DIP24
(%)
REC7.5-xx3.3SRW/H*/AM
9-18, 18-36, 36-72
3.3
3300
1.800
78
REC7.5-xx05SRW/H*/AM
9-18, 18-36, 36-72
5
2200
1.500
81-82
REC7.5-xx09SRW/H*/AM
9-18, 18-36, 36-72
9
680
833
83-84
REC7.5-xx12SRW/H*/AM
9-18, 18-36, 36-72
12
330
625
84-85
REC7.5-xx15SRW/H*/AM
9-18, 18-36, 36-72
15
220
500
85-86
REC7.5-xx05DRW/H*/AM
9-18, 18-36, 36-72
±5
±1000
±750
81-82
REC7.5-xx09DRW/H*/AM
9-18, 18-36, 36-72
±9
±330
±417
83-84
REC7.5-xx12DRW/H*/AM
9-18, 18-36, 36-72
±12
±160
±312
84-85
REC7.5-xx15DRW/H*/AM
2:1
xx = 9-18Vin = 12V,
xx = 18-36Vin = 24,
xx = 36-72Vin = 48
9-18, 18-36, 36-72
±15
±100
±250
85-86
* add suffix /H1 for 1kVDC Isolation, /H2 for 2kVDC
Isolation or /H3 for 3kVDC Isolation
*/H3 version is not available in /AM/SMD combination
* add suffix /SMD for SMD package, e.g. REC7.52405DRW/H1/AM/SMD
/H3/AM/SMD combination is not allowed
* no plastic case is available for REC7.5
Specifications (Core Operating Area)
Input Voltage Range
2:1
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
0.4% max.
Load Voltage Regulation (25% to 100% full load )
Output Ripple and Noise (at 20MHz BW)
3.3V output type
5, 9, 12 and 15V output types
120kHz typ.
H1 types
H2 types
H3 types
see Selection Guide
1000VDC min.
2000VDC min.
3000VDC min.
see Application Note
(tested for 1 second)
(tested for 1 second)
(tested for 1 second)
(long term isolation)
-55°C to +125°C
Nickel Plated Metal with Non-Conductive Base
122
16g
using MIL-HDBK 217F
using MIL-HDBK 217F
Derating-Graph
(Ambient Temperature)
60
95% RH
Detailed Information see
Application Notes chapter "MTBF"
The REC7.5-xxxxSRW/DRW-series a wide
input voltage range of DC/DC converters
offering single and dual regulated outputs.
24-pin DIP and high efficiency allows an
operating temperature of -40°C to +71°C.
Continuous, Auto Restart
Package Weight
MTBF (+25°C)
(+71°C)
Description
80
Relative Humidity
Case Material
EN-60950-1 Certified
EN-60601-1 Certified
(Suffix H3)
UL-60950-1 Certified
1 GΩ min.
-40°C to +71°C (see Graph)
Storage Temperature Range
7.5 Watt
DIP24 & SMD
Single & Dual
Output
100
Isolation Resistance
Operating Temperature Range (free air convection)
REC7.5S_DRW/H*
/AM Series
50pFtyp.
Isolation Capacitance
Short Circuit Protection
DC/DC-Converter
0.8% max.
100mVp-p max.
50mVp-p max.
Operating Frequency
Efficiency at Full Load
Isolation Voltage
Isolation Voltage
Isolation Voltage
Rated Working Voltage
ECONOLINE
Output Power (%)
Features
40
30
20
0
Safe Operating Area
-40
0
50
85 100
71
150
Operating Temperature °C
800 x 103hours
>200 x 103hours
January-2006
www.recom-international.com
REC7.5-S_DRW/H*/AM
Series
ECONOLINE
DC/DC-Converter
Typical Characteristics
Single
Dual
Efficiency / Load
Efficiency / Load
100
4805
2412
80
100
60
60
483.3
4812
20
0
0% 20%
40%
60%
Total Output current (%)
2405D
40
Efficiency %
40
Efficiency %
4815D
2409D
80
20
0
100%
80%
2412D
0% 20%
40%
60%
Total Output current (%)
80%
100%
Package Style and Pinning (mm) Wide Input 2:1
3rd angle
projection
24 PIN DIP Package
20.30
32.00
Pin Connections DIP24
10.50
3.81
15.24
0.51
4.60
Recommended Footprint Details
1.00 ø+0.15/–0
2 3
9
11
Bottom View
23 22
16
2.54
14
2.54
Pin #
Single
Dual
2
–Vin
–Vin
3
–Vin
–Vin
9
NC
Com
11
NC
–Vout
14
+Vout
+Vout
16
– Vout
Com
22
+Vin
+Vin
23
+Vin
+Vin
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Top View
24 PIN SMD Package
32.00
19.90
31.40
11.20
2.54
10.90
3.81
20.30
6.35
25.40
Recommended Footprint Details
Pin area
0.1 x 0.50
2.54
0.50
1.54
2.03
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.67
24.64
24 23 22 21 20
16 15 14 13
11 x 2.54
www.recom-international.com
Top View
1
All unused pins are NC (No
Connection). SMD pin connections follow the standard package
pinning. See Notes for restrictions on /H3 SMD versions.
Tol:
± 0.25 mm
27.94
January-2006
123
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
10W 1”x 2” Package (50.1x25.4x10.8mm)
1.6kVDC Isolation
Wide Input 2:1 & 4:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Remote ON/OFF-Control for Single Types
Efficiency to 84%
DC/DC-Converter
REC10S_DRW(Z)/
H Series
Selection Guide
Part
Input
Output
Output
Number
Voltage
Voltage
Current
1” x 2”
(VDC)
(VDC)
(mA)
REC10-xx3.3SRW/H
9-18, 18-36, 36-75
3.3
2000
74-76
REC10-xx05SRW/H
9-18, 18-36, 36-75
5
2000
80-81
REC10-xx12SRW/H
9-18, 18-36, 36-75
12
830
81-84
REC10-xx15SRW/H
9-18, 18-36, 36-75
15
670
82-84
REC10-xx24SRW/H
9-18, 18-36, 36-75
24
420
81-84
REC10-xx3.3SRWZ/H
9-36, 18-75
3.3
2000
74
REC10-xx05SRWZ/H
9-36, 18-75
5
2000
77-80
REC10-xx12SRWZ/H
9-36, 18-75
12
830
81-82
REC10-xx15SRWZ/H
9-36, 18-75
15
670
80-82
REC10-xx3.3DRWZ/H
9-36, 18-75
±3.3
±1000
74
REC10-xx05DRWZ/H
9-36, 18-75
±5
±1000
77-80
REC10-xx12DRWZ/H
9-36, 18-75
±12
±416
81-82
REC10-xx15DRWZ/H
9-36, 18-75
±15
±333
80-82
2:1
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-75Vin = 48
10 Watt
1” x 2”
Single & Dual
Output
Efficiency
(%)
Designed to meet EN-60950-1
UL-60950-1 Pending
4:1
* add suffix "/CTRL" for optional Remote ON/OFF-Control
xx = 9-36Vin = 24
xx = 18-75Vin = 48
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
π type
Input Filter
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
±0.5% max.
Load Voltage Regulation (10% to 100% full load )
±1% max.
Minimum Load
3.3, 5V, ±3.3, ±5Vout
3%
12,15, 24, ±12, ±15Vout
0%
Ripple
<0.2% Vout +40mVp-p max.
Noise
<0.5% Vout +50mVp-p max.
120%, automatic recovery
80
Zener diode clamp
Short Circuit Protection
Current limit, auto-recovery
Efficiency at Full Load
85% max.
(tested for 1 second)
Rated Working Voltage
(long term isolation)
1600VDC min.
see Application Notes
Isolation Capacitance
1000pF
Isolation Resistance
100 MΩ min.
Output Power (%)
120
100
Over Voltage Protection
IIsolation Voltage
(Ambient Temperature)
300kHz typ.
Operating Frequency
Over Power Protection
Derating-Graph
2:1 Range
4:1 Range
60
Safe Operating Area
40
20
0
60%
-25
0
25
50
Operating Temperature (°C)
70
75
100
Is 2:1 Range
Is 4:1 Range
continued on next page
124
July-2006
www.recom-international.com
ECONOLINE
REC10-S_DRW(Z)/H
Series
DC/DC-Converter
Specifications (Core Operating Area) cont.
Operating Temperature Range (Natural convection) 2:1
(with derating)
4:1
-25°C to +70°C (see Graph)
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
32g
EMI (Conducted & Radiated Emission)
MTBF (+25°C) Detailed Information see
(+70°C) Application Notes chapter "MTBF"
}
EN 55022 class A
800 x 103 hours
256 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) 1” x 2” , Wide Input 2:1 & 4:1
3rd angle
projection
1“ x 2“ PIN Package
50.10
25.40
25.40
20.32
20.32
10.80
6.00
1.0
15.24
20.32
Recommended Footprint Details
Pin Connections
5.08
1
2
Pin #
1
2
3
4
5
5
3
10.16
Bottom View 4
2
2.54
1
10.16
4
2.54
Top View
2.54
Dual
+Vin
–Vin
+Vout
Com
-Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
3
5
Single
+Vin
–Vin
+Vout
No Pin
-Vout
1.2ø+0.2/–0.1
REC10-Series also available with Remote ON/OFF - Control
For order information please contact your RECOM representative.
Recommended Footprint Details
REC10-S_DRW(Z)/H/CTRL
6
3
5.08
1
2
10.16
Bottom View 4
1
10.16
7.62
6
2
2.54
Pin #
1
2
3
4
5
6
4
3
5
2.54
www.recom-international.com
Pin Connections
5
2.54
July-2006
Top View
1.2ø+0.2/–0.1
Single
+Vin
–Vin
+Vout
No Pin
-Vout
CTRL
Dual
+Vin
–Vin
+Vout
Com
-Vout
CTRL
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
125
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
15W 1”x 2” Package (50.1x25.4x10.8mm)
1.6kVDC Isolation
Wide Input 2:1 & 4:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Remote ON/OFF-Control for Single Types
Efficiency to 87%
DC/DC-Converter
REC15S_DRW(Z)/
H Series
Selection Guide
Part
Number
1” x 2”
Input
Output
Output
Voltage
Voltage
Current
(VDC)
(VDC)
(mA)
(%)
REC15-xx3.3SRW/H
9-18, 18-36, 36-75
3.3
3000
77-79
REC15-xx05SRW/H
9-18, 18-36, 36-75
5
3000
80-83
REC15-xx12SRW/H
9-18, 18-36, 36-75
12
1250
82-86
REC15-xx15SRW/H
9-18, 18-36, 36-75
15
1000
84-87
REC15-xx24SRW/H
9-18, 18-36, 36-75
24
625
84-87
REC15-xx3.3SRWZ/H
9-36, 18-75
3.3
3000
76
REC15-xx05SRWZ/H
9-36, 18-75
5
3000
78-82
REC15-xx12SRWZ/H
9-36, 18-75
12
1250
82-84
REC15-xx15SRWZ/H
9-36, 18-75
15
1000
83-84
REC15-xx05DRWZ/H
10-40, 18-75
±5
±1500
78
REC15-xx12DRWZ/H
10-40, 18-75
±12
±625
79
REC15-xx15DRWZ/H
10-40, 18-75
±15
±500
79
2:1
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-75Vin = 48
15 Watt
1” x 2”
Single & Dual
Output
Efficiency
Designed to meet EN-60950-1
UL-60950-1 Pending
4:1
* add suffix "CTRL" for optional Remote ON/OFF-Control
xx = 9-36Vin = 24
xx = 10-40Vin = 24
xx = 18-75Vin = 48
Specifications (Core Operating Area)
Input Voltage Range
2:1 & 4:1
π type
Input Filter
Output Voltage Accuracy
±0.5% max.
Operating Frequency
300kHz typ.
Works over 120% of rating and recovers automatically
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Current limit, auto-recovery
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
(tested for 1 second)
(long term isolation)
87% max.
1600VDC min.
see Application Notes
Isolation Capacitance
(Ambient Temperature)
120
100
Output Power (%)
Load Voltage Regulation (10% to 100% full load )
±1% max.
Minimum Load
3.3, 5, ±3.3, ±5Vout
3%
12,15, 24V, ±12, ±15Vout
0%
Ripple
<0.2% Vout +40mVp-p max.
Noise
<0.5% Vout +50mVp-p max.
Over Power Protection
Derating-Graph
±2% max.
Line Voltage Regulation
2:1 Range
80
60%
60
Safe Operating Area
40
20
0
-25
0
4:1 Range
25 40 50
Operating Temperature (°C)
70
40%
75
100
Is 2:1 Range
Is 4:1 Range
1000pF
Isolation Resistance
100 MΩ min.
continued on next page
126
July-2006
www.recom-international.com
ECONOLINE
REC15-S_DRW(Z)/H
Series
DC/DC-Converter
Specifications (Core Operating Area) cont.
IOperating Temperature Range (Natural convection) 2:1
-25°C to +70°C (see Graph)
(with derating)
-25°C to +70°C (see Graph)
4:1
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
32g
EMI (Conducted & Radiated Emission)
MTBF (+25°C) Detailed Information see
(+40°C) Application Notes chapter "MTBF"
}
EN 55022 class A
800 x 103 hours
245 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) 1” x 2” , Wide Input 2:1 & 4:1
3rd angle
projection
1“ x 2“ PIN Package
50.10
25.40
25.40
20.32
20.32
10.80
6.00
1.0
15.24
20.32
Recommended Footprint Details
Pin Connections
5.08
1
2
Pin #
1
2
3
4
5
5
3
10.16
Bottom View 4
2
2.54
1
10.16
4
2.54
Top View
2.54
Dual
+Vin
-Vin
+Vout
Com
-Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
3
5
Single
+Vin
-Vin
+Vout
No Pin
-Vout
1.2ø+0.2/–0.1
REC15-Series also available with Remote ON/OFF - Control
For detailed information please contact your RECOM representative.
REC15-S_DRW(Z)/H/CTRL
Recommended Footprint Details
6
3
5.08
1
2
10.16
Bottom View 4
2.54
1
10.16
7.62
6
2
Pin #
1
2
3
4
5
6
4
3
5
2.54
www.recom-international.com
Pin Connections
5
2.54
July-2006
Top View
1.2ø+0.2/–0.1
Single
+Vin
–Vin
+Vout
No Pin
-Vout
CTRL
Dual
+Vin
–Vin
+Viout
Com
-Vout
CTRL
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
127
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
20W 1”x 2” Package (50.1x25.4x10.8mm)
1.6kVDC Isolation
Wide Input 2:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Remote ON/OFF-Control for Single Types
Efficiency to 87%
DC/DC-Converter
REC20SRW/H
Series
20 Watt
1” x 2”
Single
Output
Selection Guide
Part
Input
Output
Output
Number
Voltage
Voltage
Current
1” x 2”
(VDC)
(VDC)
(mA)
(%)
18-36, 36-75
2.5
4000
83
REC20-xx3.3SRW/H
18-36, 36-75
3.3
4000
86
REC20-xx05SRW/H
18-36, 36-75
5
4000
87
REC20-xx2.5SRW/H
2:1
xx = 18-36Vin = 24
xx = 36-75Vin = 48
Efficiency
* add suffix "CTRL" for optional Remote ON/OFF-Control
Specifications (Core Operating Area)
Input Voltage Range
2:1
π type
Input Filter
Output Voltage Accuracy
±0.5% max.
Load Voltage Regulation (10% to 100% full load )
Ripple
Noise
±1% max.
110mVp-p max.
200mVp-p max.
Operating Frequency
400kHz typ.
Works over 120% of rating and recovers automatically
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Current limit, auto-recovery
Transient Response
87% max.
1600VDC min.
see Application Notes
(tested for 1 second)
(long term isolation)
Isolation Capacitance
100 MΩ min.
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Case Material
MSL Level 1
95% RH
Nickel-Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
32g
EMI (Conducted & Radiated Emission)
MTBF (+25°C) Detailed Information see
(+40°C) Application Notes chapter "MTBF"
}
128
(Ambient Temperature)
120
100
1000pF
Isolation Resistance
Operating Temperature Range (Natural convection) (with derating)
Relative Humidity
Derating-Graph
500 us (100% to 50% full load at ±1% error band)
using MIL-HDBK 217F
using MIL-HDBK 217F
July-2006
Output Power (%)
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
UL-60950-1 Pending
±2% max.
Line Voltage Regulation
Over Power Protection
Designed to meet EN-60950-1
80
60
Safe Operating Area
40
20
0
-25
0
25 40 50
70
75
100
Operating Temperature (°C)
EN 55022 class A
>550 x 103 hours
193 x 103 hours
www.recom-international.com
ECONOLINE
REC20-SRW/H
Series
DC/DC-Converter
Package Style and Pinning (mm) 1” x 2” , Wide Input 2:1
3rd angle
projection
1“ x 2“ PIN Package
50.10
25.40
25.40
20.32
20.32
10.80
6.00
1.0
15.24
20.32
Recommended Footprint Details
Pin Connections
5.08
1
2
Pin #
1
2
3
4
5
5
3
10.16
Bottom View 4
2
2.54
1
10.16
4
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
3
5
2.54
Top View
2.54
Single
+Vin
-Vin
+Vout
No Pin
-Vout
1.2ø+0.2/–0.1
REC20-Series also available with Remote ON/OFF - Control
For detailed information please contact your RECOM representative.
Recommended Footprint Details
REC20-SRW/H/CTRL
6
3
5.08
1
2
10.16
Bottom View 4
2.54
1
10.16
7.62
6
2
Pin #
1
2
3
4
5
6
4
3
5
2.54
www.recom-international.com
Pin Connections
5
2.54
July-2006
Top View
1.2ø+0.2/–0.1
Single
+Vin
–Vin
+Vout
No Pin
-Vout
CTRL
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
129
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
20W 2”x 2” Package (50.8x11.40x50.8mm)
1.6kVDC Isolation
Wide Input 2:1 & 4:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Vout Trim and ON/OFF Control Function
Efficiency to 88%
DC/DC-Converter
REC20S_DRWB
(Z)/H
Series
Selection Guide
Part
Input
Output
Output
Number
Voltage
Voltage
Current
Efficiency
2” x 2”
(VDC)
(VDC)
(mA)
(%)
REC20-xx3.3SRWB/H
9-18, 18-36, 36-75
3.3
4000
76-78
REC20-xx05SRWB/H
9-18, 18-36, 36-75
5
4000
78-82
REC20-xx12SRWB/H
9-18, 18-36, 36-75
12
1670
81-86
REC20-xx15SRWB/H
9-18, 18-36, 36-75
15
1330
82-85
REC20-xx24SRWB/H
9-18, 18-36, 36-75
24
833
83-88
REC20-xx05DRWB/H
9-18, 18-36, 36-75
±5
±2000
77-83
REC20-xx12DRWB/H
9-18, 18-36, 36-75
±12
±833
81-85
REC20-xx15DRWB/H
9-18, 18-36, 36-75
±15
±660
82-85
REC20-xx3.3SRWBZ/H
10-40, 18-75
3.3
4000
72-74
REC20-xx05SRWBZ/H
10-40, 18-75
5
4000
75-77
REC20-xx12SRWBZ/H
10-40, 18-75
12
1670
77-79
REC20-xx15SRWBZ/H
10-40, 18-75
15
1330
77-79
REC20-xx05DRWBZ/H
10-40, 18-75
±5
±2000
74-76
REC20-xx12DRWBZ/H
10-40, 18-75
±12
±833
76-78
REC20-xx15DRWBZ/H
10-40, 18-75
±15
±660
77-79
2:1
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-75Vin = 48
20 Watt
2” x 2”
Single & Dual
Output
Designed to meet EN-60950-1
UL-60950-1 Pending
4:1
* add suffix "CTRL" for optional Remote ON/OFF-Control
xx = 10-40Vin = 24
xx = 18-75Vin = 48
Derating-Graph
Specifications (Core Operating Area)
Input Voltage Range
π type
Single & Dual
Single
Dual
±2% max.
±0.5% max.
±0.5% max.
±3% max.
<0.2% Vout +20mVp-p max.
<0.5% Vout +50mVp-p max.
Trim
±10%
Operating Frequency
Over Power Protection
200kHz typ.
Works over 120% of rating and recovers automatically
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup, auto-recovery
Efficiency at Full Load
88% max.
120
100
Output Power (%)
Input Filter
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load )
Ripple
Noise
(Ambient Temperature)
2:1 & 4:1
2:1 Range
80
Safe Operating Area
60
4:1 Range
40
20
0
40%
-25
0
25
50
Operating Temperature (°C)
70
75
100
Is 2:1 Range
Is 4:1 Range
continued on next page
130
July-2006
www.recom-international.com
ECONOLINE
REC20-S_DRWB(Z)/H
Series
DC/DC-Converter
Specifications (Core Operating Area) cont.
Isolation Voltage
(tested for 1 second)
Rated Working Voltage
(long term isolation)
1600VDC min.
see Application Notes
Isolation Capacitance
1000pF
Isolation Resistance
Operating Temperature Range (Natural convection) 2:1
(with derating)
4:1
100 MΩ min.
-25°C to +70°C (see Graph)
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
70g
EMI (Conducted & Radiated Emission)
MTBF (+25°C)
(+70°C)
}
Detailed Information see
Application Notes chapter "MTBF"
EN 55022 class A
using MIL-HDBK 217F
using MIL-HDBK 217F
>550 x 103 hours
231 x 103 hours
Package Style and Pinning (mm) 2” x 2” , Wide Input 2:1 & 4:1
3rd angle
projection
2“ x 2“ PIN Package
50.80
50.80
11.40
dia.
1.0
6.00
Pin Connections
Pin #
1
2
4
5
6
7
8
45.80
5
10.16
5.08
1
2
10.16
27.94
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
6
10.16
Bottom View
4
12.70
-Vout
-Vout
7
Trim Up
10.16
10kW
Trimpot
Trim
8
10.16
Trim Down
+Vout
www.recom-international.com
Single
Dual
+Vin
+Vin
–Vin
–Vin
No Pin/CTRL No Pin/CTRL
NC
+Vout
+Vout
Com
–Vout
–Vout
Trim
Trim
July-2006
Trim
10kW
Trimpot
10kW
Trimpot
+Vout
131
Features
Regulated
Converters
●
●
●
●
●
●
●
●
30W Package (50.8x11.90x40.6mm)
1.6kVDC Isolation
4:1 Wide Input Range
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Vout Trim and ON/OFF Control Function
Efficiency to 85%
Selection Guide
Part
Input
Output
Output
Voltage
Voltage
Current
(VDC)
(VDC)
(mA)
(%)
REC30-xx1.8SRWZ/H
10-40, 18-75
1.8
6000
80
REC30-xx2.5SRWZ/H
10-40, 18-75
2.5
6000
83
REC30-xx3.3SRWZ/H
10-40, 18-75
3.3
6000
84
REC30-xx05SRWZ/H
10-40, 18-75
5
6000
85
REC30-xx12SRWZ/H
10-40, 18-75
12
2500
83
REC30-xx15SRWZ/H
10-40, 18-75
15
2000
83
REC30-xx24SRWZ/H
10-40, 18-75
24
1250
83
REC30-xx05DRWZ/H
10-40, 18-75
±5
±3000
83
REC30-xx12DRWZ/H
10-40, 18-75
±12
±1250
81
REC30-xx15DRWZ/H
10-40, 18-75
±15
±1000
81
Number
4:1
xx = 10-40Vin = 24
xx = 18-75Vin = 48
Efficiency
* add suffix "CTRL" for optional Remote ON/OFF-Control
ECONOLINE
DC/DC-Converter
REC30S_DRWZ
/H Series
30 Watt
Single &
Dual Output
Designed to meet EN-60950-1
UL-60950-1 Pending
Specifications (Core Operating Area)
Input Voltage Range
4:1
π type
Input Filter
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
±0.5% max.
Load Voltage Regulation (10% to 100% full load )
±10%
±1%
±1%
Operating Frequency
300kHz typ.
Works over 120% of rating and recovers automatically
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup, auto-recovery
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
(Ambient Temperature)
±1% max.
Trim
Ripple
Noise
Over Power Protection
Derating-Graph
(tested for 1 second)
(long term isolation)
83% max.
1600VDC min.
see Application Notes
Isolation Capacitance
1000pF
Isolation Resistance
100 MΩ min.
Continued on next page.
132
July-2006
www.recom-international.com
ECONOLINE
REC30-S_DRWZ/H
Series
DC/DC-Converter
Specifications (Core Operating Area)
Operating Temperature Range (Natural convection) (with derating)
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
MTBF (+25°C) Detailed Information see
(+40°C) Application Notes chapter "MTBF"
}
58g
>550 x 103 hours
212 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) , Wide Input 4:1
3rd angle
projection
40.60
50.80
11.90
dia.
1.0
6.00
Pin Connections
Pin #
1
2
4
5
6
7
8
45.70
5
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
10.16
5.08
22.86
6
1
2
10.16
4
7.62
10.16
Bottom View
-Vout
-Vout
Trim Up
7
10.16
8
5.08
July-2006
10kW
Trimpot
Trim
Trim Down
+Vout
www.recom-international.com
Single
Dual
+Vin
+Vin
–Vin
–Vin
No Pin/CTRL No Pin/CTRL
NC
+Vout
+Vout
Com
–Vout
–Vout
Trim
Trim
Trim
10kW
Trimpot
10kW
Trimpot
+Vout
133
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
40W Package (50.8x11.90x40.6mm)
1.6kVDC Isolation
Wide Input 2:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Vout Trim and ON/OFF Control Function
Efficiency to 87%
DC/DC-Converter
REC40SRW/H
Series
40 Watt
Single
Output
Selection Guide
Part
Input
Output
Output
Voltage
Voltage
Current
(VDC)
(VDC)
(mA)
(%)
REC40-481.8SRW/H
36-75
1.8
8000
80
REC40-482.5SRW/H
36-75
2.5
8000
83
REC40-483.3SRW/H
36-75
3.3
8000
85
REC40-4805SRW/H
36-75
5
8000
87
REC40-4812SRW/H
36-75
12
3333
83
REC40-4815SRW/H
36-75
15
2666
83
REC40-4824SRW/H
36-75
24
1666
84
Number
Efficiency
* add suffix "CTRL" for optional Remote ON/OFF-Control
Designed to meet
EN-60950-1
Specifications (Core Operating Area)
Input Voltage Range
2:1
π type
Input Filter
Output Voltage Accuracy
±2% max.
Line Voltage Regulation
±0.5% max.
Load Voltage Regulation (10% to 100% full load )
Ripple
Noise
Trim
Derating-Graph
±1% max.
±1%
±1%
±10%
Operating Frequency
400kHz typ.
(Ambient Temperature)
120
100
Over Voltage Protection
Zener diode clamp
80
Short Circuit Protection
Hiccup mode, auto-recovery
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
87% max.
1600VDC min.
see Application Notes
(tested for 1 second)
(long term isolation)
Isolation Capacitance
1000pF
Isolation Resistance
Output Power (%)
Works over 120% of rating and recovers automatically
Over Power Protection
60
Safe Operating Area
40
20
0
-25
0
25 40 50
100 MΩ min.
Operating Temperature Range (Natural convection) 2:1(with derating) -25°C to +70°C (see Graph)
Storage Temperature Range
70
75
100
Operating Temperature (°C)
-55°C to +105°C
Case Temperature
+100°C max.
continued on next page
134
July-2006
www.recom-international.com
ECONOLINE
REC40-SRW/H
Series
DC/DC-Converter
Specifications (Core Operating Area)
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
MTBF (+25°C) Detailed Information see
(+40°C) Application Notes chapter "MTBF"
}
58g
>550 x 103 hours
187 x 103 hours
using MIL-HDBK 217F
using MIL-HDBK 217F
Package Style and Pinning (mm) , Wide Input 2:1
3rd angle
projection
PIN Package 2:1
40.60
50.80
11.90
dia.
1.0
6.00
Pin Connections
45.70
Pin #
1
2
4
5
6
7
8
5
10.16
5.08
22.86
6
1
2
10.16
4
7.62
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
10.16
Bottom View
Single
+Vin
–Vin
CTRL
NC
+Vout
-Vout
Trim
7
10.16
8
-Vout
-Vout
Trim Up
5.08
10kW
Trimpot
Trim
Trim Down
+Vout
www.recom-international.com
July-2006
Trim
10kW
Trimpot
10kW
Trimpot
+Vout
135
Features
Regulated
Converters
●
●
●
●
●
●
●
●
ECONOLINE
40W 2”x 2” Package (50.8x11.40x50.8mm)
1.6kVDC Isolation
Wide Input 2:1
Regulated Output
UL94V-0 Package Material
Continuous Short Circuit Protection
Vout Trim and ON/OFF Control Function
Efficiency to 87%
DC/DC-Converter
REC40S_DRWB/H
Series
40 Watt
2” x 2”
Single & Dual
Output
Selection Guide
Part
Input
Output
Output
Number
Voltage
Voltage
Current
2” x 2”
(VDC)
(VDC)
(mA)
(%)
REC40-xx1.8SRWB/H
9-18, 18-36, 36-75
1.8
8000
76
REC40-xx2.5SRWB/H
9-18, 18-36, 36-75
2.5
8000
82
REC40-xx3.3SRWB/H
9-18, 18-36, 36-75
3.3
8000
84
REC40-xx05SRWB/H
9-18, 18-36, 36-75
5
8000
86
REC40-xx12SRWB/H
9-18, 18-36, 36-75
12
3333
83
REC40-xx15SRWB/H
9-18, 18-36, 36-75
15
2666
83
REC40-xx24SRWB/H
9-18, 18-36, 36-75
24
1666
84
REC40-xx05DRWB/H
9-18, 18-36, 36-75
±5
±4000
83
REC40-xx12DRWB/H
9-18, 18-36, 36-75
±12
±1666
83-84
REC40-xx15DRWB/H
9-18, 18-36, 36-75
±15
±1320
82-83
2:1
xx = 9-18Vin = 12
xx = 18-36Vin = 24
xx = 36-75Vin = 48
Efficiency
* add suffix "CTRL" for optional Remote ON/OFF-Control
Designed to meet
EN-60950-1
Specifications (Core Operating Area)
Input Voltage Range
2:1
π type
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load )
Ripple
Noise
Single & Dual
Single, Dual
Dual
±2% max.
±0.5% max.
±1% max.
±3% max.
<0.2% Vout +20mVp-p max.
<0.5% Vout +50mVp-p max.
Trim
±10%
Operating Frequency
Over Power Protection
400kHz typ.
Works over 120% of rating and recovers automatically
Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup, auto-recovery
Efficiency at Full Load
Isolation Voltage
Rated Working Voltage
(tested for 1 second)
(long term isolation)
87% max.
1600VDC min.
see Application Notes
Isolation Capacitance
1000pF
Isolation Resistance
Derating-Graph
(Ambient Temperature)
120
100
Output Power (%)
Input Filter
80
Safe Operating Area
60
40
20
0
-25
0
25
50
70
75
100
Operating Temperature (°C)
100 MΩ min.
Continued on next page
136
July-2006
www.recom-international.com
ECONOLINE
REC40-S_DRWB/H
Series
DC/DC-Converter
Specifications (Core Operating Area)
Operating Temperature Range (Natural convection) (with derating)
-25°C to +70°C (see Graph)
Storage Temperature Range
-55°C to +105°C
Case Temperature
+100°C max.
Temperature Coefficient
±0.02%/°C
Relative Humidity
95% RH
Case Material
Nickel-Plated Copper with Non-Conductive Base, Six-side Shielded
Cooling Method
Natural convection
Package Weight
MTBF (+25°C) Detailed Information see
(+50°C) Application Notes chapter "MTBF"
}
using MIL-HDBK 217F
using MIL-HDBK 217F
70g
>550 x 103 hours
187 x 103 hours
Package Style and Pinning (mm) 2” x 2” , Wide Input 2:1
3rd angle
projection
2“ x 2“ PIN Package
50.80
50.80
11.40
dia.
1.0
6.00
Pin Connections
Pin #
1
2
4
5
6
7
8
45.80
5
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
10.16
5.08
1
2
6
10.16
Bottom View
10.16
27.94
Single
Dual
+Vin
+Vin
–Vin
–Vin
No Pin/CTRL No Pin/CTRL
NC
+Vout
+Vout
Com
–Vout
–Vout
Trim
Trim
4
12.70
-Vout
7
-Vout
Trim Up
10.16
Trim
8
10.16
Trim Down
+Vout
www.recom-international.com
10kW
Trimpot
July-2006
Trim
10kW
Trimpot
10kW
Trimpot
+Vout
137
INNOLINE - CONTENTS
Isolated and non-isolated
Step Down Switching Regulators
Series
Power
Isolation
Input Voltages
Output Voltages
No. of
(Watts)
(kVDC)
(VDC)
(VDC)
Outputs
or (A)
R-78xx-0.5
min.
0.5A
max.
1.5, 1.8, 2.5, 3.3, 5.0,
8.0 – 34, 11 – 34, 15 – 34, 18-34
6.5, 9.0, 12, 15
4.75 – 34, 6.5 – 34,
1.8, 2.5, 3.3, 5.0,
8.0 – 34, 11 – 34, 15 – 34
6.5, 9.0, 12
1A
4.75 – 18, 6.5 – 18
R-78Axx-1.0SMD 1A
R-78xx-1.0
Page
No.
V1 / V2 / V3
4.75 – 30, 4.75 – 34, 6.5 – 34,
R-78Axx-0.5SMD 0.5A
Case
S
SIP3
139
S
SMD
143
1.8, 2.5, 3.3, 5.0
S
SIP3
148
4.75 – 18, 6.5 – 18
1.8, 2.5, 3.3, 5.0
S
SMD
151
R-5xxxP/DA
2, 3, 4, 5A
4.5 - 18, 6.5 - 18, 7.0 - 18
1.2, 1.8, 2.5, 3.3, 5
S
SIP12
155
R-6xxxP/D
1, 2A
9 - 32, 11 - 32, 14 - 32
1.8, 2.5, 3.3, 5, 9, 12
S
SIP12
161
R-7xxxP/D
2, 3, 4A
4.5 – 28, 6.5 – 28, 8.5 – 28,
3.3, 5.0, 6.5, 9.0, 12, 15
S
SIP12
165
12(10.8 - 13.2)
24(21.6 - 26.4)
+180, +300, +350
-180, -300, -350
S
SIP
170
5, 12
24 / 48 / 72
T
SIP8
172
12 – 28, 15 – 28, 19 – 28
DC-DC Converter
Rxx-xxx S xx
2 ~ 2.5W
RxxTR244872
3W
1
Rxx-100A
5W
12 ( 10 – 14 ), 15 (13 – 17), 24 ( 21 – 27 )
+55...+135
S
DIP24
175
Rxx-150A
5W
12 ( 10 – 14 ), 15 (13 – 17), 24 ( 21 – 27 )
+95...+210
S
DIP24
175
RP50-xxxxS
50W
1.6
18 - 36, 36 - 75
1.8, 2.5, 3.3, 5, 15
S
61.0 x 57.91 x12.7 mm
178
RP50-xxxxSB
50W
1.6
36 - 75
1.8, 2.5, 3.3, 5
S
36.83 x 57.91 x12.7 mm 182
RP75-xxxxS
75W
1.6
36 - 75
1.8, 2.5, 3.3, 5, 15
S
61.0 x 57.91 x12.7 mm
186
RP75-xxxxDI
75W
1.6
36 - 75
5 / 3.3, 3.3 / 2.5
D (isol.)
61.0 x 57.91 x12.7 mm
186
RP75-xxxxDI
75W
1.6
36 - 75
5 / 1.8, 3.3 / 1.8
D (isol.)
61.0 x 57.91 x12.7 mm
186
RP75-xxxxSB
50W
1.6
36 - 75
1.8, 2.5, 3.3, 5
S
36.83 x 57.91 x12.7 mm 191
RP100-xxxxS
100W
1.6
36 - 75
1.8, 2.5, 3.3, 5, 15
S
61.0 x 57.91 x12.7 mm
195
RP100-xxxxDI
100W
1.6
36 - 75
5 / 3.3, 5 / 2.5, 3.3 / 2.5
D (isol.)
61.0 x 57.91 x12.7 mm
195
RP100-xxxxSB
100W
1.6
36 - 75
1.8, 2.5, 3.3, 5
S
36.83 x 57.91 x12.7 mm 201
RP125-xxxxSB
125W
1.6
36 - 75
1.8, 2.5, 3.3, 5
S
36.83 x 57.91 x12.7 mm 205
High Voltage Input Series
Various
Various
Various
Various
Various
209
High Voltage Output Series
Various
Various
Various
Various
Various
209
Products in bold type are new products for 2006
138
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
INNOLINE
Efficiency up to 97%,Non isolated,
no need for heatsinks
Pin-out compatible with LM78XX Linears
Very low profile( L*W*H=11.5*7.5*10.2 )
Wide input range.(4.75V ~ 34V)
Short circuit protection, Thermal shutdown
Non standard outputs available as specials
between 1.5V ~15.5V
Low ripple and noise
DC/DC-Converter
R-78xx-0.5
Series
UL94V-0 Package Material
EMC Certified
See Positive-to Negative Converter
Application Note for use as a voltage
inverter (alternative to LM79xx Linear)
0.5 AMP
SIP3
Single Output
Selection Guide
Part
Number
SIP3
Input
Range (1)
(V)
Output
Voltage
(V)
Output
Current
(A)
Efficiency
Min. Vin
Max. Vin
(%)
(%)
R-781.5-0.5
4.75 – 30
1.5
0.5
73
63
R-781.8-0.5
4.75 – 34
1.8
0.5
82
71
R-782.5-0.5
4.75 – 34
2.5
0.5
87
77
R-783.3-0.5
4.75 – 34
3.3
0.5
91
81
R-785.0-0.5
6.5 – 34
5.0
0.5
94
86
R-786.5-0.5
8.0 – 34
6.5
0.5
95
88
R-789.0-0.5
11 – 34
9.0
0.5
96
92
R-7812-0.5
15 – 34
12
0.5
97
94
R-7815-0.5
18 – 34
15
0.5
97
95
EN-55022 Certified
EN-55034 Certified
EN-60601-1-2 Certified
Note 1:1.5V Output can be unstable with Vin>30VDC
Description
Derating-Graph
The R-78xx-Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators
and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as heat so there
is no need for any heat sinks with their additional space and mounting costs. Low ripple and noise figures
and a short circuit input current of typically only 7mA round off the specifications of this versatile converter
series.
This R-78xx-0.5 is fully certified to EN 60601-1-2 (Medical Equipment), EN 55022 (Emissions), and
EN55024 (Immunity) EMC Standards.
(Ambient Temperature)
Output Power (%)
120
100
80
60
40
20
0
Safe Operating Area
-40
0
25
50
Operating Temperature (°C)
www.recom-international.com
27-March-2007
85
75
100
71
139
INNOLINE
R-78xx-0.5
Series
DC/DC-Converter
Specifications ( typical at 25°C, 10% minimum load, unless otherwise specified )
Characteristics
Input Voltage Range
Conditions
1.5V
1.8V to 15.5V
Min.
4.75
4.75
Typ.
Max.
30.0V
34.0V
Output Voltage Range (for customized parts)
All Series
1.25
15.5V
Output Current
All Series
0
500mA
Output Current Limit
All Series
Short Circuit Input Current
All Series
2000mA
10
30mA
Internal Power Dissipation
0.4W
Short Circuit Protection
Continuous, automatic recovery
Output Voltage Accuracy (At 100% Load)
Line Voltage Regulation (Vin = min. to max. at full load)
Load Regulation (10 to 100% full load)
Dynamic Load Stability
Ripple & Noise (without Output Capacitor)
Ripple & Noise (with Output Capacitor=100µF)
Temperature Coefficient
All Series
1.5V to 6.5V
9V to 15.5V
1.5V to 6.5V
9V to 15.5V
100% <-> 50% load
100% <-> 10% load
1.5V to 6.5V
9V to 15.5V
1.5V to 6.5V
9V to 15.5V
±2
0.2
0.1
0.4
0.25
±75mV
±3%
0.4%
0.2%
0.6%
0.4%
20mVp-p
30mVp-p
15mVp-p
25mVp-p
-40°C ~ +85°C ambient
0.015%/°C
Max capacitance Load
220µF
Switching Frequency
280
Quiescent Current
330
Vin = min. to max. at 0% load
Operating Temperature Range
380kHz
5
7mA
-40°C
+85°C
Operating Case Temperature
+100°C
Storage Temperature Range
-55°C
+125°C
Case Thermal Impendance
70°C / W
Thermal Shutdown
Internal IC junction
+160°C
Package Weiught
MTBF (+25°C)
.
(+71°C)
}
±100mV
30mVp-p
40mVp-p
20mVp-p
35mVp-p
1.9g
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
21098 x 10³ hours
using MIL-HDBK 217F
4212 x 10³ hours
Standard Application Circuit
+Vin
R-78xx-0.5
+Vout
Add a blocking diode
to Vout if current can
flow backwards into
the output, as this can
damage the converter.
C1
10µF
(Vin>28V)
-Vin
-Vout
Input capacitor needed only if Vin>28VDC.
140
27-March-2007
www.recom-international.com
INNOLINE
R-78xx-0.5
Series
DC/DC-Converter
Characteristics
Ripple
Efficiency
100
Vo=12V,15 V
Vo=9V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
50
50
Vo=12V
Vo=15V
Vo=9V
Vo=5V
Vo=3.3V
Ripple (mV)
Efficiency (%)
25
10
Vin (V)
20
Vo=1.8V
Vo=1.5V
30 34
10
Vin (V)
Efficiency Vs Vin (Full Load)
30 34
20
Ripple Vs Vin (full load)
100
50
Vo=15V
Vo=12V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
50
Vo=12V
Vo=15V
Vo=9V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
Efficiency (%)
Ripple (mV)
25
0.1
0.2
0.3
0.4
0.5
0.6
0.1
Output Current ( A )
0.2
0.3
0.4
0.5
0.6
Output Current ( A )
Efficiency Vs Load ( Vin=Max )
Ripple Vs Load ( Vin=24V )
100
50
Vo=12V,15V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
25
Vo=15V
Vo=12V
Vo=1.8V
Vo=3.3, 9V
Vo=5V
Vo=1.5V
Ripple (mV)
Efficiency (%)
50
0.1
0.2
0.3
0.4
0.5
0.1
0.6
0.3
0.4
0.5
0.6
Ripple Vs Load ( Vin=Min )
Efficiency Vs Load ( Vin=Min )
www.recom-international.com
0.2
Output Current ( A )
Output Current ( A )
27-March-2007
141
R-78xx-0.5
Series
INNOLINE
DC/DC-Converter
Application Examples
High efficiency, isolated, dual unregulated outputs
DC/DC Converter ( 1:1 )
+Vout
R-78xx-0.5
+Vin
Com
C1
-Vout
C2
- Isolated dual outputs
-Vin
- Wide input range 4.75V to 34V
C1 : optional, C2: Required (further decoupling filtering may be necessary between the two converters)
Isolated (up to 6KV), wide Input range regulated output
DC/DC Converter ( 1:1 )
+Vin
R-78xx-0.5
+Vout
C1
-Vin
C2
- High isolation voltage
- Improved loading / line regulation
- Wide Input Voltage Range
- Point-of-Load Architecture
-Vout
C1: Required (further decoupling filtering may be
necessary between the two converters), C2: Optional
Package Style and Pinning (mm)
SIP3 PIN Package
3rd angle
projection
7.55
10.2
RECOM
R-785.0-0.5
**** Pb
RECOM
R-785.0-0.5
0.51 typ.
**** Pb
1 2 3
0.7 typ.
4.10
Recommended Footprint Details
1.00 ø+0.15/–0
11.50
0.25
Bottom View
3.21
142
5.08
2.54
2.0
Top View
2.54
27-March-2007
Pin Connections
Pin #
1
+Vin
2
GND
3
+Vout
xx.x ±0.5mm
xx.xx ±0.25mm
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
INNOLINE
Efficiency up to 97%,Non isolated,
no need for heatsinks
SMD Package
Adjustable Output Voltage
Wide input range.(4.75V ~ 34V)
Short circuit protection, Thermal shutdown
Remote On/Off Control
DC/DC-Converter
R-78Axx0.5SMD
Series
UL94V-0 Package Material
Very Low Shutdown Current
See Positive-to Negative Converter
Application Note for use as a voltage
inverter (alternative to LM79xx Linear)
0.5 AMP
SMD
Single Output
Selection Guide
Part
Number
SMD
Input
Range (1)
(V)
Output
Voltage
(V)
Adjust
Range
(V)
Output
Current
(A)
Efficiency
Min. Vin Max. Vin
(%)
(%)
R-78A1.5-0.5SMD
4.75 – 30
1.5
fixed
0.5
73
63
R-78A1.8-0.5SMD
4.75 – 34
1.8
1.5~3.3
0.5
82
71
R-78A2.5-0.5SMD
4.75 – 34
2.5
1.5~4.5
0.5
87
77
* add suffix -R for tape&reel packing e.g.
R-78A3.3-0.5SMD
4.75 – 34
3.3
1.8~5.5
0.5
91
81
R-78A5.0-0.5-R. For more details and dimensi-
R-78A5.0-0.5SMD
6.5 – 34
5.0
2.5~8.0
0.5
94
86
R-78A6.5-0.5SMD
8.0 – 34
6.5
3.3~11.0
0.5
95
88
R-78A9.0-0.5SMD
11 – 34
9.0
4.5~12.6
0.5
96
92
R-78A12-0.5SMD
15 – 34
12
4.5~12.6
0.5
97
94
R-78A15-0.5SMD
18 – 34
15
fixed
0.5
97
95
ons of the tapes and reels see page 334 to 336.
Note 1:1.5V Output can be unstable with Vin>30VDC
Description
Derating-Graph
The R-78Axx-0.5SMD series high efficiency switching regulators are ideally suited to pick-and-place mass
production. The efficiency of up to 97% means that very little energy is wasted as heat. The additional features of remote on/off control and adjustable output voltages will find many uses in the Battery-powered,
Industrial, Medical and Automotive markets. Low ripple and noise figures and a shutdown input current of
typically only 20uA round off the specifications of this versatile SMD converter series.
(Ambient Temperature)
Output Power (%)
120
100
80
60
40
20
0
Safe Operating Area
-40
0
25
50
Operating Temperature (°C)
www.recom-international.com
07-May-2007
75
71
85
143
100
INNOLINE
R-78Axx-0.5 SMD
Series
DC/DC-Converter
Specifications ( typical at 25°C, 10% minimum load, unless otherwise specified )
Characteristics
Input Voltage Range (Note 1)
Conditions
See Table
Min.
4.75
Typ.
Max.
34.0V
Output Voltage Range
See Table
1.5
Output Current
All Series
0
Output Current Limit
All Series
2000mA
Short Circuit Input Current
All Series
25mA
15V
500mA
Internal Power Dissipation
0.4W
Short Circuit Protection
Continuous, automatic recovery
Output Voltage Accuracy (At 100% Load)
All Series
Adjustable Voltage Range
Line Voltage Regulation (Vin = min. to max. at full load)
See Table 1
1.5V to 6.5V
9V to 15V
1.5V to 6.5V
9V to 15V
100% <-> 50% load
100% <-> 10% load
1.5V to 6.5V
9V to 15.5V
Load Regulation (10 to 100% full load)
Dynamic Load Stability
Ripple & Noise (without Output Capacitor)
Temperature Coefficient
±2
±3%
±50%
0.4%
0.2%
1.0%
0.4%
0.2
0.1
0.7
0.25
±75V
20mVp-p
30mVp-p
-40°C ~ +85°C ambient
0.015%/°C
Max capacitance Load
220µF
Switching Frequency
280
Quiescent Current
330
Vin = min. to max. at 0% load
Shutdown Input Current
Remote On/Off Threshold Voltage
2.4
ON/OFF Remote Control
380kHz
5
7mA
20
35uA
2.6
2.8V
ON: Open or 1.6<Vr<5V, OFF: GND or 0<Vr<1.6V
Operating Temperature Range (with derating)
Ir=1.8uA typ.
-40°C
Switch On/Off Time
+85°C
(using Remote On/Off Control)
50ms
Operating Case Temperature
+100°C
Storage Temperature Range
-55°C
+125°C
Case Thermal Impendance
70°C / W
Thermal Shutdown
Internal IC junction
+160°C
Package Weight
MTBF (+25°C)
.
(+71°C)
±100mV
30mVp-p
40mVp-p
2.7g
}
using MIL-HDBK 217F
Detailed Information see
Application Notes chapter "MTBF"
21098 x 10³ hours
4214 x 10³ hours
Standard Application Circuit
+Vin
1,2
On/Off
Cin
R-78Axx-0.5SMD
10 3,7,8,9
10µF
(Vin>28V)
6
+Vout
4,5
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
See Application
Examples for details.
R1
R2
-Vin
-Vout
Use input capacitor if Vin>28VDC.
144
07-May-2007
www.recom-international.com
INNOLINE
R-78Axx-0.5 SMD
Series
DC/DC-Converter
Characteristics
Ripple
Efficiency
100
Vo=12V,15 V
Vo=9V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
50
50
Vo=15V
Vo=12V
Vo=9V
Vo=5V
Vo=3.3V
Ripple (mV)
Efficiency (%)
25
10
Vin (V)
20
Vo=1.8V
Vo=1.5V
30 34
10
Vin (V)
Efficiency Vs Vin (Full Load)
30 34
20
Ripple Vs Vin (full load)
100
Vo=15V
Vo=12V
Vo=5V
Vo=3.3V
50
Vo=1.8V
Vo=1.5V
Vo=12V
Vo=15V
Vo=9V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
25
Efficiency (%)
Ripple (mV)
50
0.1
0.2
0.3
0.4
0.5
0.6
0.1
Output Current ( A )
Ripple (mV)
Efficiency (%)
50
0.4
0.5
0.6
20
Vo=15V
15
Vo=12V
10
Vo=1.8V
Vo=3.3, 9V
Vo=5V
Vo=1.5V
5
0.1
0.6
0.2
0.3
0.4
0.5
0.6
Output Current ( A )
Output Current ( A )
Ripple Vs Load ( Vin=Min )
Efficiency Vs Load ( Vin=Min )
www.recom-international.com
0.5
25
Vo=12,15V
Vo=5V
Vo=3.3V
Vo=1.8V
Vo=1.5V
0.3
0.4
Ripple Vs Load ( Vin=24V )
100
0.2
0.3
Output Current ( A )
Efficiency Vs Load ( Vin=Max )
0.1
0.2
07-May-2007
145
R-78Axx-0.5 SMD
Series
INNOLINE
DC/DC-Converter
Application Examples
Flash Memory Program Voltage Switcher
Pgm
R-78A12-0.5SMD
+Vin
20kW
D1
Reprogrammable
Flash Memory
C1
220kW
0V
Program
0V
D2
D1, D2: schottky Diode
"Program" = 0V, Pgm Pin = +5V
"Program" = high, Pgm Pin = +12,6V
Output protection from external voltage
+Vin
Vout =
5.0V
R-78A5.0-0.5SMD
68kW
On/Off
-Vin
Com
Converter Output set to 5.7V to compensate for diode drop
DC/DC Converter ( 1:1 )
+Vin
R-78Axx-0.5SMD
C1
-Vin
C2
- High isolation voltage
- Improved loading / line regulation
- Wide Input Voltage Range
- Point-of-Load Architecture
- Remote On/Off Control
146
+Vout
On/Off
-Vout
C1: Required (further decoupling filtering may be
necessary between the two converters), C2: Optional
07-May-2007
www.recom-international.com
R-78Axx-0.5 SMD
Series
INNOLINE
DC/DC-Converter
Table 1: Adjustment Resistor Values
0.5Adc
R-78A1.8
-0.5SMD
Vout (nom.)
1.8Vdc
Vout (adj)
R1
1.5 (V)
3KΩ
R2
R-78A2.5
-0.5SMD
R-78A3.3
-0.5SMD
R-78A5.0
-0.5SMD
2.5Vdc
3.3Vdc
5.0Vdc
R1
R2
R1
R2
R1
R2
R-78A6.5
R-78A12
R-78A9.0
-0.5SMD
-0.5SMD
6.5Vdc
R1
-0.5SMD
9.0Vdc
R2
R1
12.0Vdc
R2
R1
R2
200Ω
1.8 (V)
12KΩ
2.5 (V)
12KΩ
3.0 (V)
4.7KΩ
50KΩ
3.3 (V)
2.7KΩ
29KΩ
21KΩ
5.6KΩ
88.4KΩ
17KΩ
27KΩ
6.7KΩ
3.6 (V)
19.4KΩ
69KΩ
42KΩ
14KΩ
3.9 (V)
14kΩ
30.5KΩ
58KΩ
23KΩ
4.5 (V)
8kΩ
12.1kΩ
180KΩ
49KΩ
4.9 (V)
7.6kΩ
850KΩ
5.0 (V)
6.8kΩ
5.1 (V)
6.2kΩ
5.5 (V)
4kΩ
26KΩ
17KΩ
77kΩ
36KΩ
24KΩ
86kΩ
39KΩ
26KΩ
540kΩ
97KΩ
42KΩ
28KΩ
71kΩ
160KΩ
56KΩ
36KΩ
112KΩ
63KΩ
400KΩ
125KΩ
6.5 (V)
20.2kΩ
8.0 (V)
7.2kΩ
26KΩ
9.0 (V)
11.3KΩ
10 (V)
5.2KΩ
11 (V)
1.8KΩ
200KΩ
59KΩ
345KΩ
18.5KΩ 740KΩ
12 (V)
5.2KΩ
12.6 (V)
830KΩ
216KΩ
Package Style and Pinning (mm)
SMD 10Pin Package
3rd angle
projection
9.30
15.24
14.84
7.05
1.65
10 9 8 7 6
9.00
RECOM
R-78Axx-0.5SMD
xxxx
9.00
1 2 3 4 5
8.60
10.00
2.54x4
Pin Connections
11.80
Recommended Footprint Details
0.55
13.00
Bottom View
2.54
1.20
www.recom-international.com
10 9 8 7 6
1.20
Top View
1 2 3 4 5
1.80
07-May-2007
Pin #
1,2
+Vin
3,7,8,9
GND
4,5
+Vout
6
V adj
10
Remote On/Off
xx.x ±0.5mm
xx.xx ±0.25mm
147
Features
●
●
●
●
●
●
●
●
INNOLINE
Efficiency up to 94%, non-isolated,
no need for heatsinks!
Pin-out compatible with LM78XX Linears
Very low profile (L*W*H=11.5*7.5*10.2mm)
Wide input range (4.75V ~ 18V)
Short circuit protection, thermal shutdown
DC/DC-Converter
R-78xx-1.0
Series
UL94V-0 Package Material
Non standard outputs available as specials
between 1.5V ~5.5V
Low ripple and noise
1.0 AMP
SIP3
Single Output
Selection Guide
Part
Number
SIP3
Input
Range
(V)
Output
Voltage
(V)
Output
Current
(A)
Efficiency
Min. Vin
Max. Vin
(%)
(%)
R-781.8-1.0
4.75 – 18
1.8
1.0
82
76
R-782.5-1.0
4.75 – 18
2.5
1.0
87
81
R-783.3-1.0
4.75 – 18
3.3
1.0
90
84
R-785.0-1.0
6.5 – 18
5.0
1.0
94
89
Description
The R-78xx-1.0 series high efficiency switching regulators are ideally suited to replace 1 Amp 78xx linear
regulators and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as
heat so there is no need for any heat sinks with their additional space and mounting costs. Low ripple and
noise figures and a short circuit input current of typically only 10mA round off the specifications of this
versatile converter series.
Specifications ( typical at 25°C, 10% minimum load, unless otherwise specified )
Characteristics
Conditions
Min.
Typ.
Max.
Input Voltage Range
All Series
4.75
18V
Output Voltage Range
All Series
1.5
5.5V
Output Current
All Series
0
Output Current Limit
All Series
Short Circuit Input Current
All Series
1000mA
3000mA
10
Internal Power Dissipation
30mA
0.4W
Short Circuit Protection
Continuous, automatic recovery
Output Voltage Accuracy (At 100% Load)
All Series
±2
±3%
Line Regulation (100% Load, Vin max.)
All Series
0.2
0.4%
Load Regulation (10 to 100% full load)
All Series
0.4
0.6%
Dynamic Load Stability
100% <-> 50% load
±85mV
Ripple & Noise (20Mhz BW)
All Series
Temperature Coefficient
-40°C ~ +85°C ambient
0.015%/°C
350
5
-40°C
+100°C
Storage Temperature Range
-55°C
+125°C
Case Thermal Impendance
70°C/W
Internal IC junction
148
80
60
40
30
20
0
-40
Safe Operating Area
0
25
50
Operating Temperature (°C)
+160°C
Package Weight
(+71°C)
7mA
+85°C
Operating Case Temperature (with derating)
.
430kHz
Output Power (%)
280
Vin = min. to max. at 0% load
Operating Temperature Range
MTBF (+25°C)
120
100
220µF
Switching Frequency
Thermal Shutdown
(Ambient Temperature)
±100mV
20mVp-p 30mVp-p
Max capacitance Load
Quiescent Current
Derating-Graph
60
75
85
100
1.9g
}
Detailed Information see
Application Notes chapter "MTBF"
using MIL-HDBK 217F
13338 x 10³ hours
using MIL-HDBK 217F
3880 x 10³ hours
27-March-2007
www.recom-international.com
R-78xx-1.0
Series
INNOLINE
DC/DC-Converter
Standard Application Circuit
+Vin
+Vout
R-78xx-1.0
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
-Vin
-Vout
Characteristics
Ripple
Efficiency
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
Vo=5V
25
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
Efficiency (%)
50
25
5
15
10
18
5
Ripple Vs Vin ( Full Load )
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
50
Vo=5V
25
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
Efficiency (%)
18
Vin ( V )
Efficiency Vs Vin (Full Load)
25
0.2
0.4
0.6
0.8
1.0
1.2
0.2
Output Current ( A )
0.4
0.6
0.8
1.0
1.2
Output Current ( A )
Efficiency Vs Load ( Vin=Max )
Ripple Vs Load ( Vin=Max )
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
50
25
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
Efficiency (%)
15
10
Vin ( V )
25
0.2
0.4
0.6
0.8
1.0
1.2
0.2
Output Current ( A )
0.6
0.8
1.0
1.2
Output Current ( A )
Efficiency Vs Load ( Vin=Min )
www.recom-international.com
0.4
Ripple Vs Load ( Vin=Min )
27-March-2007
149
R-78xx-1.0
Series
INNOLINE
DC/DC-Converter
Application Examples
High efficiency, isolated, dual regulated outputs
REC3-0515DRW/H4
+15VDC
R-785.0-1.0
+Vin
Com
C1
-15VDC
C2
- Medical Grade Isolated Dual Outputs
-Vin
C1: Optional , C2 : Required (further decoupling filtering
may be necessary between the two converters)
- Wide input range 6.5V to 18V
- High Efficiency, Suitable for 12V Battery Powered Devices
Isolated (up to 6KV), wide Input range regulated output
DC/DC Converter ( 1:1 )
+Vin
R-78xx-1.0
+Vout
C1
-Vin
C2
- High isolation voltage
- Improved loading / line regulation
- Wide Input Voltage Range
- Point-of-Load Architecture
-Vout
C1: Required (further decoupling filtering may be
necessary between the two converters), C2: Optional
Package Style and Pinning (mm)
SIP3 PIN Package
3rd angle
projection
7.55
10.2
RECOM
R-785.0-1.0
**** Pb
RECOM
R-785.0-1.0
0.51 typ.
**** Pb
1 2 3
0.7 typ.
4.10
Recommended Footprint Details
1.00 ø+0.15/–0
11.50
0.25
Bottom View
3.21
150
2.54
2.0
Top View
5.08
2.54
27-March-2007
Pin Connections
Pin #
1
2
3
xx.x ±0.5mm
xx.xx ±0.25mm
+Vin
GND
+Vout
www.recom-international.com
Features
●
●
●
●
●
●
●
INNOLINE
Efficiency up to 94%,Non isolated,
no need for heatsinks
SMD Package (UL94V-0 Material )
Adjustable Output Voltage
Wide input range.(4.75V ~ 18V)
Short circuit protection, Thermal shutdown
Remote On/Off Control
Very Low Shutdown Current
DC/DC-Converter
R-78Axx1.0SMD
Series
Selection Guide
Part
Number
SMD
Input
Range (1)
(V)
Output
Voltage
(V)
Adjust
Range
(V)
Output
Current
(A)
Efficiency
Min. Vin Max. Vin
(%)
(%)
R-78A1.8-1.0SMD
4.75 – 18
1.8
1.5~3.3
1.0
82
71
R-78A2.5-1.0SMD
4.75 – 18
2.5
1.5~4.5
1.0
87
77
R-78A3.3-1.0SMD
4.75 – 18
3.3
1.8~5.5
1.0
91
81
R-78A5.0-1.0SMD
6.5 – 18
5.0
2.5~5.5
1.0
94
86
1.0 AMP
SMD
Single Output
Description
The R-78Axx-1.0SMD series high efficiency switching regulators are ideally suited to pick-and-place mass
production. The efficiency of up to 94% means that very little energy is wasted as heat. remote on/off control
and adjustable output voltage are useful additional features of this versatile SMD converter series.
Specifications ( typical at 25°C, 10% minimum load, unless otherwise specified )
Characteristics
Conditions
Min.
Input Voltage Range (Note 1)
See Table
4.75
Output Voltage Range
See Table
1.5
Output Current
All Series
0
Typ.
Max.
18.0V
5.5V
1000mA
Output Current Limit
All Series
3000mA
Short Circuit Input Current
All Series
30mA
Internal Power Dissipation
Continuous, automatic recovery
Output Voltage Accuracy (At 100% Load)
All Series
Adjustable Voltage Range
See Table 1
±2
±3%
±50%
Line Voltage Regulation (Vin = min to max at full load)
0.2
0.4%
Load Regulation (10% to 100% full load)
0.7
1.0%
Dynamic Load Stability
100%<>50% load
±85mV ±100mV
Ripple & Noise (20MHz BW)
20mVp-p 30mVp-p
Temperature Coefficient
-40°C~+85°C ambient
220µF
280
Quiescent Current
350
Vin = min. to max. at 0% load
Shutdown Current
Remote On/Off Threshold Voltage
2.4
5
7mA
20
35µA
2.6
2.6V
ON: Open or 1.6<Vr<5V, OFF: GND or 0<Vr<1.6V
Operating Temperature Range
Switch On/Off Time
Ir=1.8uA typ.
-40°C
+85°C
(using Remote On/Off Control)
50ms
-55°C
+125°C
Operating Case Temperature
+100°C
Storage Temperature Range
Case Thermal Impendance
Thermal Shutdown
70°C / W
Internal IC junction
+160°C
Package Weight
(+71°C)
(Ambient Temperature)
430kHz
120
100
Output Power (%)
Switching Frequency
.
Derating-Graph
0.015%/°C
Max capacitance Load
MTBF (+25°C)
ons of the tapes and reels see page 334 to 336.
0.4W
Short Circuit Protection
ON/OFF Remote Control
* add suffix -R for tape&reel packing e.g.
R-78A5.0-1.0-R. For more details and dimensi-
80
60
40
30
20
0
-40
Safe Operating Area
0
25
50
Operating Temperature (°C)
60
75
85
100
2.7g
}
Detailed Information see
Application Notes chapter "MTBF"
www.recom-international.com
using MIL-HDBK 217F
13338 x 10³ hours
using MIL-HDBK 217F
3880 x 10³ hours
07-May-2007
151
R-78Axx-1.0 SMD
Series
INNOLINE
DC/DC-Converter
Standard Application Circuit
+Vin
1,2
R-78Axx-1.0 SMD
10 3,7,8,9
On/Off
+Vout
4,5
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
See Application
Examples for details.
R1
6
R2
-Vin
-Vout
Characteristics
Ripple
Efficiency
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
Efficiency (%)
Vo=5V
25
50
25
5
15
10
5
18
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
Efficiency (%)
Vo=5V
25
50
25
0.2
0.4
0.6
0.8
1.0
0.2
1.2
0.4
0.6
0.8
1.0
1.2
Output Current ( A )
Output Current ( A )
Ripple Vs Load ( Vin=Max )
Efficiency Vs Load ( Vin=Max )
100
50
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
75
25
Vo=5V
Vo=3.3V
Vo=2.5V
Vo=1.8V
Ripple (mV)
50
Efficiency (%)
18
Ripple Vs Vin ( Full Load )
Efficiency Vs Vin (Full Load)
25
0.2
0.4
0.6
0.8
1.0
0.2
1.2
0.4
0.6
0.8
1.0
1.2
Output Current ( A )
Output Current ( A )
Ripple Vs Load ( Vin=Min )
Efficiency Vs Load ( Vin=Min )
152
15
10
Vin ( V )
Vin ( V )
07-May-2007
www.recom-international.com
R-78Axx-1.0 SMD
Series
INNOLINE
DC/DC-Converter
Application Examples
3.3V/5V Selectable 1A Power Supply
Vout = 3.3V
or 5.0V @ 1A
R-78A3.3-1.0SMD
+Vin
6.8kW
On/Off
-Vin
Com
3.3V/5V
Select
(TTL)
4.7kW
REC10-4812SRWZ/H
[email protected]
+Vin
R-78A5.0-1.0
Z1
C1
-Vin
C2
R1
- High isolation voltage - 1.6kV
- Improved loading / line regulation
- Wide Input Voltage Range - 18~75V
- Point-of-Load Architecture
- Power Sequencing - Low voltage supplies
turn on after 12V supply has stabilised.
- Further decoupling filtering may be necessary
between the converters
On/Off
[email protected]
C3
0V
C3,C4 : optional
R-78A3.3-1.0
On/Off
[email protected]
C4
0V
www.recom-international.com
07-May-2007
153
R-78Axx-1.0 SMD
Series
INNOLINE
DC/DC-Converter
Table 1: Adjustment Resistor Values
1.0Adc
R-78A1.8-1.0SMD
R-78A2.5-1.0SMD
R-78A3.3-1.0SMD
R-78A5.0-1.0SMD
1.8Vdc
2.5Vdc
3.3Vdc
5.0Vdc
Vout (nom.)
Vout (adj)
R1
1.5 (V)
3KΩ
R2
R1
R2
R1
R2
R1
R2
200Ω
1.8 (V)
12KΩ
770Ω
2.5 (V)
12KΩ
3.0 (V)
4.7KΩ
50KΩ
3.3 (V)
2.7KΩ
29KΩ
21KΩ
5.6KΩ
88.4KΩ
17KΩ
27KΩ
3.6 (V)
19.4KΩ
69KΩ
42KΩ
3.9 (V)
14kΩ
30.5KΩ
58KΩ
4.5 (V)
8kΩ
12.1kΩ
180KΩ
4.9 (V)
7.k6Ω
850KΩ
5.0 (V)
6.8kΩ
5.1 (V)
6.2kΩ
540kΩ
5.5 (V)
4kΩ
71kΩ
Package Style and Pinning (mm)
3rd angle
projection
SMD 10Pin Package
9.30
15.24
14.84
7.05
1.65
10 9 8 7 6
9.00
RECOM
R-78Axx-1.0SMD
xxxx
9.00
1 2 3 4 5
8.60
10.00
2.54x4
Pin Connections
11.80
Recommended Footprint Details
0.55
13.00
Bottom View
2.54
154
1.20
10 9 8 7 6
Top View
1 2 3 4 5
1.20
07-May-2007
1.80
Pin #
1,2
+Vin
3,7,8,9
GND
4,5
+Vout
6
V adj
10
Remote On/Off
xx.x ±0.5mm
xx.xx ±0.25mm
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
●
●
Auto-sense
Non-Isolation
Synchronous rectification design
Adjustable Output voltage
2, 3, 4 & 5AMP Adjustable Positive
Step Down Integrated Switching Regulator
Over load protection (125% full load typical)
Remote ON/OFF Control(Ground Off)
Wide Input Range
Continuous short circuit protection
(Short Circuit Input Current, Iin<50mA)
Input voltage range 4.5V~18V
Efficiency to 96%
Inpu
Nominal
Vout
Output
Range
(V)
Output Voltage
(V)
Adjust Range
(V)
Current
(A)
min.Vin
(%)
R-521.2xA
4.5 – 18
1.2
1.0 – 3.0
2
83
79
75
R-521.8xA
4.5 – 18
1.8
1.1 – 4.5
2
88
85
82
R-522.5xA
4.5 – 18
2.5
1.6 – 5.5
2
91
88
86
R-523.3xA
4.5 – 18
3.3
1.6 – 5.5
2
92
90
89
R-525.0xA
6.5 – 18
5.0
3.0 – 5.5
2
95
93
92
R-531.2xA
4.5 – 18
1.2
1.0 – 3.0
3
85
84
82
R-531.8xA
4.5 – 18
1.8
1.1 – 4.5
3
89
88
86
R-532.5xA
4.5 – 18
2.5
1.6 – 5.5
3
92
91
89
R-533.3xA
4.5 – 18
3.3
1.6 – 5.5
3
94
93
92
R-535.0xA
6.5 – 18
5.0
3.0 – 5.5
3
96
95
94
R-541.2xA
4.5 – 18
1.2
1.0 – 3.0
4
82
81
79
R-541.8xA
4.5 – 18
1.8
1.1 – 4.5
4
87
86
85
R-542.5xA
4.5 – 18
2.5
1.6 – 5.5
4
91
89
88
R-543.3xA
4.5 – 18
3.3
1.6 – 5.5
4
93
92
91
R-545.0xA
6.5 – 18
5.0
3.0 – 5.5
4
95
94
93
R-551.2xA
4.5 – 18
1.2
1.0 – 3.0
5
81
80
78
R-551.8xA
4.5 – 18
1.8
1.1 – 4.5
5
86
85
84
R-552.5xA
4.5 – 18
2.5
1.6 – 5.5
5
90
89
88
R-553.3xA
4.5 – 18
3.3
1.6 – 5.5
5
92
91
90
R-555.0xA
7.0 – 18
5.0
3.0 – 5.5
5
94
93
92
Number
SIP12
DC/DC-Converter
R-5xxxPA
_DA Series
UL94V-0 Package Material
Selection Guide
Part
INNOLINE
Efficiency
12V max.Vin
(%)
(%)
2, 3, 4, 5 AMP
SIP12
Vertical &
Horizontal
Note: Vin -Vout ≥ 1.5V if adjust function is used!
Suffix x: (see mechanical drawing for details)
x = P pins vertical through hole
x = D pins bent for horizontal through hole mounting
Description
The R-5XXX series is a high performance 1.2V to 5.0V , 2Amp to 5Amp,12-Pin SIP (single in-line
package) integrated switching regulator (ISR). Synchronuous - rectified design yields excellent efficiencies up to 96%. Short circuit protection with crowbar function to reduce the short circuit input current
to under 50mA. Autosense function compensates for any losses in long circuit loops.
www.recom-international.com
27-March-2007
155
INNOLINE
R-5xxxPA_DA
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Characteristics
Conditions
Min.
Typ.
Max.
Output Voltage Range
All Series
0.8
6.0V
Output Current
R-52xxPA/DA
R-53xxPA/DA
R-54xxPA/DA
R-55xxPA/DA
0.2
0.3
0.4
0.5
2.0A
3.0A
4.0A
5.0A
Output Current Limit
R-52xxPA/DA
R-53xxPA/DA
R-54xxPA/DA
R-55xxPA/DA
Short Circuit Input Current
All Series
2.5
3.75
5.0
6.0
3.0A
4.25A
5.5A
6.5A
50mA
Short Circuit Protection
Continuous, automatic recovery
Output Voltage Accuracy
At 100% Load
All Series
±1%
±2%
Line Voltage Regulation (Vin = min. to max. at full load)
R-52xxPA/DA
R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA
0.25
0.5
0.5%
1.0%
Load Regulation (10 to 100% full load)
R-52xxPA/DA
R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA
0.5
1.0
1.0%
2.0%
Ripple & Noise
R-52xxPA/DA
R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA
40mVp-p
80mVp-p
Transient Response (see note 1)
50% Load Change
Vout Over / Undershoot
Remote ON / OFF (see note 2)
(positive logic)
Remote Off Input Current
Open or High (Power ON)
Low (Power OFF)
Remote ON/OFF low level
Switching Frequency
Quiescent Current
70mVp-p
120mVp-p
100µs
200µs
100mV
4.5
270
18V
0.8V
100µA
300
330kHz
Vin = min. to max. at 0% load
20mA
Operating Temperature Range
-40°C
+85°C
Storage Temperature Range
-40°C
+125°C
Internal Power Dissipation
Io x Vo x (1-Efficiency)
1.4W
MTBF (Nominal Vout, 100% load)
Tamb. = +25°C
749 x 10³ hours
Tamb. = +85°C
150 x 10³ hours
Notes:
1. Requires an electrolytic or tantalum output capacitor for proper operation in all applications (the capacitor to be placed as close as possible to the output pins)
100µF for R-52xxPA/DA, R-53xxPA/DA and R-54xxPA/DA or 220µF for R-55xxPA/DA.
2. ON / OFF pin driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET.
3. Output Current vs. Input Voltage (see graph below).
156
27-March-2007
www.recom-international.com
INNOLINE
R-5xxxPA_DA
Series
DC/DC-Converter
Standard Application Circuit
11
2, 3, 4
Vin
TTL
R-52XX
R-53XX
R-54XX
R-55XX
1µF
(Optional)
OFF
C1
ON
1
Q1
R1
(Adjust down)
9, 10
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
Vout
12
C2 (Req'd)
R2
5, 6, 7,8
(Adjust up)
100µF/10V
or 220µF/10V
(see Note 1)
Com
Com
Parallel Application Circuit
The R-52xx, R-53xx, R-54xx series can be used in parallel to upgrade the output current capacity for
the same output voltage.
For example, the R-543.3PA can parallel up with another R-554.3PA to give up to 8 amps or with the
R-533.3PA or R-523.3PA types to give output currents of up to 7 Amps or 6 Amps.
The R-55xx series cannot be paralleled.
Vin
ON/OFF
Control
Q1
C1
100µF/25V
(REQ`D)
1
2
3
4
U1
5
7
6
12
11
10
8 9
Vout
C2-1
100µF/10V
(REQ`D)
Com
Com
C2-2
100µF/10V
(REQ`D)
4
3
2
1
Component side
5
7
6
U2
8
9
10
11
12
must be connected
together
Solder side
1
C1
+Vin
Com
12
1
12 U1
U1
C2-1
1
12 U2
12
Keep 2mm to 5mm distance
between both converters
1
U2
C2-2
Com
+Vout
Sense
To Load
www.recom-international.com
27-March-2007
157
R-5xxxPA_DA
Series
INNOLINE
DC/DC-Converter
Output Current vs Input Voltage
Ambient Temperature (°C)
How to calculate the max output current
The internal power dissipation(PD)follows the equation:
PD = Io × Vo × (1-η)
Io = PD / Vo × (1-η)
Where
PD = Internal power dissipation
Io = Output current
Vo = Output voltage
η = Efficiency
Example: R-545.0P , at Vin = 18Vdc , Vo = 5Vdc ,η=93% (see "Selection Guide" table)
(a) When Ta = 60°C , PD = 1.4 Watt (see adjacent diagram)
Io = 1.4(W) / 5(V) × (1-0.93) = 4(A)
(b) When Ta = 85°C , PD = 1 Watt (see adjacent diagram)
Io = 1(W) / 5(V) × (1-0.93) = 2.857(A)
(c) At Vin = 12Vdc efficiency = 94% (see "Selection Guide" table)
When Ta = 85°C , PD = 1 Watt (see adjacent diagram)
Io = 1(W) / 5(V) × (1-0.94) =3.33(A)
90
85
80
60
40
20
0
0.5
1
1.4
Internal Power Dissipation (W)
Characteristics
R-53xx / R-54xx
Output Voltage Line Regulation VS Vout
R-52xx / R-55xx
Output Voltage Line Regulation VS Vout
1
Line Regulation (%)
0.5
0
1.8
1.2
Output Voltage (V)
2.3
0
R-53xx / R-54xx
Intput Voltage Load Regulation VS Vin
1.8V
2.5V
3.3V
5.0V
Load Regulation (%)
1.5
1.0
0.5
158
10
15
2.3
5.0
3.3
2.0
1.2V
5
Input Voltage (V)
1.8
1.2
Output Voltage (V)
R-52xx / R-55xx
Intput Voltage Load Regulation VS Vin
2.0
0
0.5
5.0
3.3
1.5
Load Regulation (%)
Line Regulation (%)
1
1.0
1.2V
1.8V
2.5V
0.5
3.3V
5.0V
0
20
27-March-2007
5
Input Voltage (V)
10
15
20
www.recom-international.com
R-5xxxPA_DA
Series
INNOLINE
DC/DC-Converter
Characteristics
R-52xx
Output Current Efficiency vs Iout (Vin = Min)
R-53xx / R-54xx / R-55xx
Output Current Efficiency vs Iout (Vin = Min)
100
100
5.0V
3.3V
2.5V
1.8V
90
3.3V
2.5V
1.8V
80
1.2V
70
1
2
Output Current (A)
1.2V
R-53xx / R-54xx / R-55xx
Output Current Efficiency vs Iout (Vin = 18V)
70
0.5
1.0
Output Current (A)
2.0
1.5
R-52xx
Output Current Efficiency VS Iout (Vin = 18V)
100
100
1.2V
70
1
2
Output Current (A)
4
3
80
70
Efficiency (%)
1.8V
80
5.0V
3.3V
2.5V
1.8V
1.2V
90
5.0V
3.3V
2.5V
90
Efficiency (%)
80
5
4
3
90
Efficiency (%)
Efficiency (%)
5.0V
5
60
50
40
0.5
1.0
Output Current (A)
2.0
1.5
Package Style and Pinning (mm)
SIP12 PIN Package
3rd angle
projection
32.20
15.00
32.20
9.1
RECOM
R - 5 2 1 . 2 PA
15.00
1 2 3 4 5 6 7 8 9 10 11 12
0.7
RECOM
R-521.2DA
0.2
1 2 3 4 5 6 7 8 9 10 11 12
4.0
2.13
9.1
2.54
2.13
0.7
2.54
0.2
Bottom
View
Bottom
View
0.7
4.0
0.7
Pin Connections
Pin #
Name
Description
1
ON / OFF
2, 3, 4
Vin
Power input
5, 6, 7, 8
GND
Input and output ground (common)
Vout
Power output
9 , 10
11
Vout (Auto Sense)
12
Vout-Adj
Input pin : Active low (less than 0.8V) to disable the device
If unused this pin must be connected to Pin 9 and 10
With external resistors R1,R2 to selected output voltage
Tolerance:
± 0.25 mm
www.recom-international.com
27-March-2007
159
INNOLINE
R-5xxxPA_DA
Series
DC/DC-Converter
Table 1: Adjustment Resistor Values
2Adc
R-521.2PA/DA
R-521.8PA/DA
R-522.5PA/DA
R-523.3PA/DA
R-525.0PA/DA
3Adc
R-531.2PA/DA
R-531.8PA/DA
R-532.5PA/DA
R-533.3PA/DA
R-535.0PA/DA
4Adc
R-541.2PA/DA
R-541.8PA/DA
R-542.5PA/DA
R-543.3PA/DA
R-545.0PA/DA
5Adc
R-551.2PA/DA
R-551.8PA/DA
R-552.5PA/DA
R-553.3PA/DA
R-555.0PA/DA
1.2Vdc
1.8Vdc
2.5Vdc
3.3Vdc
5.0Vdc
Vout (nominal)
Vout (adj)
R1
R2
R1
R2
R1
R2
R1
R2
R1
R2
0.8 (V)
0.9 (V)
740Ω
1.0 (V)
3.9KΩ
1.1 (V)
13KΩ
1.05KΩ
1.2 (V)
2.1KΩ
270Ω
1.3 (V)
37KΩ
3.7KΩ
750Ω
1.5 (V)
11.5KΩ
10KΩ
2.1KΩ
390Ω
1.6 (V)
8.2KΩ
18KΩ
3.0KΩ
750Ω
1.7 (V)
6.5KΩ
41KΩ
4.1KΩ
1.2KΩ
1.8 (V)
5.2KΩ
5.6KΩ
1.7KΩ
1.9 (V)
4.3KΩ
36KΩ
7.5KΩ
2.2KΩ
2.0 (V)
3.6KΩ
1.8KΩ
10.5KΩ
2.8KΩ
2.4 (V)
2.1KΩ
5.2KΩ
82KΩ
6.8KΩ
2.5 (V)
1.8KΩ
4.3KΩ
2.6 (V)
1.65KΩ
3.6KΩ
33KΩ
10.5KΩ
3.0 (V)
1.05KΩ
2.1KΩ
6.2KΩ
33KΩ
470Ω
3.2 (V)
1.65KΩ
4.1KΩ
110KΩ
1.6KΩ
3.3 (V)
1.5KΩ
3.4KΩ
3.4 (V)
1.35KΩ
2.9KΩ
36KΩ
3.0KΩ
3.6 (V)
1.07KΩ
2.2KΩ
11KΩ
4.7KΩ
3.9 (V)
780Ω
1.4KΩ
4.7KΩ
8.5KΩ
4.5 (V)
390Ω
650Ω
1.6KΩ
30KΩ
4.9 (V)
350Ω
820Ω
220KΩ
5.0 (V)
290Ω
680Ω
5.1 (V)
220Ω
560Ω
28KΩ
5.5 (V)
39Ω
190Ω
2.6KΩ
160
27-March-2007
8.5KΩ
2.2KΩ
www.recom-international.com
Features
●
●
●
●
●
●
●
●
INNOLINE
Adjustable Output Voltage
Non-Isolated
1-2AMP Adjustable Positive Step Down
Integrated Switching Regulator
Internal Short Circuit Protection
ON/OFF Control(Ground Off)
DC/DC-Converter
R-6xxxP_D
Series
UL94V-0 Package Material
Wide Input Range
Efficiency to 96%
Selection Guide
Part
Number
SIP12
Input
Range
(V)
Nominal
Output Voltage
(V)
Vout
Adjust Range
(V)
Output
Efficiency (%)
Current Vin min.
Vin max.
(A)
(%)
(%)
R-611.8x
9 – 32
1.8
1.5 – 3.6
1
79
67
R-612.5x
9 – 32
2.5
1.5 – 4.5
1
84
74
R-613.3x
9 – 32
3.3
1.8 – 6
1
88
79
R-615.0x
9 – 32
5
1.8 – 9
1
92
84
R-619.0x
11 – 32
9
3.3 – 15
1
96
90
R-6112x
14 – 32
12
3.3 – 15
1
97
92
R-621.8x
9 – 32
1.8
1.5 – 3.6
2
76
68
R-622.5x
9 – 32
2.5
1.5 – 4.5
2
81
74
R-623.3x
9 – 32
3.3
1.8 – 6
2
86
80
R-625.0x
9 – 32
5
1.8 – 9
2
90
85
R-629.0x
11 – 32
9
3.3 – 15
2
95
91
R-6212x
14 – 32
12
3.3 – 15
2
96
93
1-2 AMP
SIP12
Vertical &
Horizontal
Note: Vin -Vout ≥ 1.5V if adjust function is used!
Suffix x: (see mechanical drawing for details)
x = P pins vertical through hole
x = D pins bent for horizontal through hole mounting
Specifications (refer to the standard application circuit, Ta: 25°C)
Characteristics
Input Voltage Range
Output Voltage Adjust Range (see table 1)
Output Current
Conditions
Vout = 1.8V
Vout = 2.5V
Vout = 3.3V
Vout = 5V
Vout = 9V
Vout = 12V
Vout = 1.8V
Vout = 2.5V
Vout = 3.3V
Vout = 5V
Vout = 9V
Vout = 12V
R-61xxP/D
R-62xxP/D
Output Current Limit
Short Circuit Input Current
4A
Vin > 12V
Short Circuit Protection
Output Voltage Accuracy
Min.
9V
9V
9V
9V
11V
14V
1.5V
1.5V
1.8V
1.8V
3.3V
3.3V
0.1A
0.2A
Typ.
1.8V
2.5V
3.3V
5V
9V
12V
4.5A
20mA
Max.
32V
32V
32V
32V
32V
32V
3.6V
4.5V
6V
9V
15V
15V
1.0A
2.0A
5A
100mA
Continuous, automatic recovery
At 100% Load
±1%
Line Voltage Regulation (Vin = min. to max. at full load)
±2%
0.5%
Continued next page
www.recom-international.com
27-March-2007
161
INNOLINE
R-6xxxP_D
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Characteristics
Load Regulation (10 to 100% full load)
Conditions
R-61xxP/D
R-62xxP/D
R-61xxP/D
R-62xxP/D
50% Load Change
Vout Over / Undershoot
Open or high (Power ON)
Low (Power OFF)
Remote ON/OFF low level
Vo Ripple & Noise
Transient Response (see note 1)
Remote ON / OFF (see note 2)
(positive logic)
Remote Off Input Current
Min.
Typ.
40mVpp
40mVpp
100us
5%
2.0V
10V
0.8V
100µA
Switching Frequency
200kHz
Quiescent Current
Max.
0.5%
1.0%
100mVpp
120mVpp
200us
250kHz
Vin = min. to max. at 0% load
6mA
300kHz
10mA
Operating Temperature Range
-40°C
+85°C
Storage Temperature Range
-40°C
+125°C
internal Power Dissipation
Io x Vo x (1-Efficiency)
1.0W
MTBF (Nominal Vout, 100% load)
Tamb. = +25°C
563 x 10³ hours
Tamb. = +71°C
117 x 10³ hours
Notes:
1. Requires a 100µF electrolytic or tantalum output capacitor for proper operation in all applications (the capacitor to be placed as close as possible to the output pins).
2. ON / OFF pin can be driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET.
3. Output Current vs. Input Voltage (see graph below).
Standard Application Circuit
Vin
OFF 1µF
(Optional)
ON
TTL
2, 3, 4
C1
R-61XX
R-62XX
1
9, 10, 11
(Adjust down)
12
Q1
Vout
R1
R2
5, 6, 7,8
(Adjust up)
C2
100µF/10V
(REQ`D)
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
Com
Com
Output Current vs Input Voltage
Ambient Temperature (°C)
R-
Output Current (A)
62
XX
2
1.2A
1
R-61XX
0
9.0
14
24 28 32
60
40
20
0
0.5 0.7
1
1.5
Internal Power Dissipation (W)
Input Voltage (V)
Max output current calculation:
Internal power dissipation
(1W) = Io x Vo x (1-Efficiency)
Io = 1(W) / Vo x (1-Efficiency)
Example : R-6212P
at Vin = 28VDC
Efficiency = 94% (see ”Selection Guide” table)
Vo = 12VDC
Io = 1W / 12V x (1-0.94) = 1.388A = 1.5A
162
90
85
80
at Vin = 14VDC
Efficiency = 96% (see ”Selection Guide” table)
Vo = 12Vdc
Io = 1W / 12V x (1-0.96) = 2.08A (spec. = 2A max.)
27-March-2007
www.recom-international.com
INNOLINE
R-6xxxP_D
Series
DC/DC-Converter
Characteristics
R-623.3 / R-613.3
Ripple vs Output Current
100
100.0
92.5
90.0
87.5
85.0
82.5
80
70
60
50
80
60
Vin = 9V
Vin = 12V
Vin = 26V
0.1
0.5
1.0
1.5
Ripple (mV)
Efficiency (%)
R-623.3 / R-613.3
Efficiency vs Output Current
20
0
0.1
2.0
0.5
1.0
1.5
2.0
Iout (A)
Iout (A)
R-625.0 / R-615.0
Ripple vs Output Current
R-625.0 / R-615.0
Efficiency vs Output Current
100
92.5
90.0
87.5
85.0
82.5
80
70
60
50
100
80
Vin = 9V
Vin = 12V
Vin = 24V
Vin = 38V
0.1
0.5
1.0
1.5
Vin = 38V
Vin = 24V
Vin = 12V
Vin = 9V
60
Ripple (mV)
Efficiency (%)
Vin = 26V
Vin = 12V
Vin = 9V
40
2.0
40
20
0
0.1
Iout (A)
0.5
1.0
1.5
2.0
Iout (A)
Package Style and Pinning (mm)
SIP12 PIN Package
3rd angle
projection
32.20
15.00
32.20
9.1
RECOM
R-615.0P
0.7
0.2
1 2 3 4 5 6 7 8 9 10 11 12
4.0
2.13
RECOM
R-615.0D
15.00
1 2 3 4 5 6 7 8 9 10 11 12
9.1
2.54
2.13
0.7
2.54
0.2
Bottom
View
Bottom
View
0.7
4.0
0.7
Pin Connections
Pin #
Name
1
ON / OFF
Description
2, 3, 4
Vin
Power input
5, 6, 7, 8
GND
Input and output ground (common)
9 , 10 , 11
Vout
Power output
12
Vout-Adj
Input pin : Active low (less than 0.8V) to disable the device
With external resistors R1,R2 to selected output voltage
Tolerance:
± 0.25 mm
www.recom-international.com
27-March-2007
163
INNOLINE
R-6xxxP_D
Series
DC/DC-Converter
Table 1: Adjustment Resistor Values
1Adc
R-611.8P/D
R-612.5P/D
R-613.3P/D
R-615.0P/D
R-619.0P/D
R-6112P/D
2Adc
R-621.8P/D
R-622.5P/D
R-623.3P/D
R-625.0P/D
R-629.0P/D
R-6212P/D
1.8VDC
2.5VDC
3.3VDC
Vout (nominal)
Vout (adj)
R1
1.5
13.6KΩ
R2
R2
R1
R2
R1
9VDC
R2
R1
12VDC
R2
R1
R2
3.3KΩ
1.8
164
R1
5VDC
8.2KΩ
3.1KΩ
820Ω
15KΩ
5.1KΩ
1.5KΩ
13KΩ
3.6KΩ
51KΩ
7.0KΩ
2.0
10KΩ
2.5
5.1KΩ
3.0
2.5KΩ
10KΩ
3.3
1.7KΩ
5.9KΩ
3.6
1.2KΩ
3.9KΩ
3.9
4.5
9.7KΩ
0Ω
0Ω
18KΩ
14KΩ
1.5KΩ
560Ω
2.8KΩ
9.1KΩ
20KΩ
3.3KΩ
1.2KΩ
1.6KΩ
3.9KΩ
60KΩ
7.5KΩ
2.1KΩ
11KΩ
4.0KΩ
5.0
2.4KΩ
5.1
2.2KΩ
60KΩ
12KΩ
4.3KΩ
5.5
1.6KΩ
15KΩ
17KΩ
5.6KΩ
6.0
1.1KΩ
7.2KΩ
24KΩ
7.5KΩ
7.0
2.8KΩ
51KΩ
12KΩ
8.0
1.5KΩ
130KΩ
19KΩ
9.0
880Ω
10
450Ω
36KΩ
55KΩ
11
180Ω
15KΩ
125KΩ
31KΩ
12
8.2KΩ
13
4.7KΩ
11KΩ
14
2.7KΩ
4.0KΩ
15
1.3KΩ
1.6KΩ
27-March-2007
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
●
Non-Isolated
Synchronous rectification design
Adjustable Output voltage
2, 3, 4AMP Adjustable Positive Step Down
Integrated Switching Regulator
Over load protection (125% full load typical)
Remote ON/OFF Control(Ground Off)
Wide Input Range
INNOLINE
DC/DC-Converter
R-7xxxP_D
Series
UL94V-0 Package Material
Continuous short circuit protection
(Very low short current Iin<50mA)
Input voltage range 4.5V~28V
Efficiency to 97%
Selection Guide
Part
Number
SIP12
Input
Range
(V)
Nominal
Output Voltage
(V)
Vout
Adjust Range
(V)
Output
Current
(A)
Efficiency (%)
Min. Vin 12V Max. Vin
R-723.3x
4.5 – 28
3.3
2.5 – 5.5
2
95
93
89
R-725.0x
6.5 – 28
5.0
3.0 – 6.0
2
96
95
91
R-726.5x
8.5 – 28
6.5
5.0 – 8.0
2
97
96
93
R-729.0x
12 – 28
9.0
7.0 – 11
2
96
-
93
R-7212x
15 – 28
12
10 – 14
2
97
-
95
R-7215x
19 – 28
15
13 – 17
2
97
-
96
R-733.3x
4.5 – 28
3.3
2.5 – 5.5
3
94
93
89
R-735.0x
6.5 – 28
5.0
3.0 – 6.0
3
95
95
92
R-736.5x
8.5 – 28
6.5
5.0 – 8.0
3
97
96
93
R-739.0x
12 – 28
9.0
7.0 – 11
3
96
-
94
R-7312x
15 – 28
12
10 – 14
3
97
-
96
R-7315x
19 – 28
15
13 – 17
3
97
-
96
R-743.3x
4.5 – 28
3.3
2.5 – 5.5
4
93
92
88
R-745.0x
6.5 – 28
5.0
3.0 – 6.0
4
95
94
91
R-746.5x
8.5 – 28
6.5
5.0 – 7.5
4
96
96
93
2, 3, 4 AMP
SIP12
Vertical &
Horizontal
Note: Vin-Vout ≥ 1.5V~4.0V depending on Vout if adjust function is used!
Suffix x: (see mechanical drawing for details)
x = P pins vertical through hole
x = D pins bent for horizontal through hole mounting
Description
The R-7XXX series is a high performance 2.5V to 15V , 2Amp to 4Amp,12-Pin SIP (single in-line
package), Integrated switching regulator (ISR). The Synchronuous - rectified design yields excellent efficiencies up to 97%. Short circuit protection with crowbar function reduces the short circuit current to
under 50mA of input current.
www.recom-international.com
27-March-2007
165
INNOLINE
R-7xxxP_D
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Characteristics
Conditions
Min.
Typ.
Output Voltage Range
All Series
2.5
17V
Output Current
R-72xxP/D
R-73xxP/D
R-74xxP/D
0.2
0.3
0.4
2.0A
3.0A
4.0A
Output Current Limit
R-72xxP/D
R-73xxP/D
R-74xxP/D
2.5
3.75
5.0
Short Circuit Input Current
All Series
50
Short Circuit Protection
Max.
3.0A
4.25A
5.5A
100mA
Continuous, automatic recovery
Output Voltage Accuracy (At 100% Load)
All Series
±1%
±2%
Line Voltage Regulation (Vin = min. to max. at full load)
All Series
0.5
1.0%
Load Regulation (10 to 100% full load)
All Series
0.5
1.0%
Ripple & Noise
All Series
40mVp-p
Transient Response (see note 1)
50% Load Change –
Vout Over / Undershoot
100µs
Remote ON / OFF (see note 2)
Open or High (Power ON)
Low (Power OFF)
4.5
Switching Frequency
70mVp-p
200µs
100mV
28V
0.8V
270
300
330kHz
Shutdown current
ON / OFF Pin pulled low
100µA
Quiescent Current
Vin = min. to max. at 0% load
30mA
Operating Temperature Range
-40°C
+85°C
Operating Case Temperature
+110°C
Storage Temperature Range
-40°C
+125°C
Thermal Impedance
Natural Convection
25°C/W
Internal Power Dissipation
Ta < 60°C
MTBF (Nominal Vout, 100% load)
Tamb. = +25°C
749 x 10³hours
Tamb. = +85°C
150 x 10³hours
1.4W
Notes:
1. Requires a 100µF electrolytic or tantalum output capacitor for proper operation in all applications (the capacitor to be placed as close as possible to the output pins).
2. ON / OFF pin driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET.
Standard Application Circuit
Vin
OFF 1µF
(Optional)
ON
TTL
2, 3, 4
C1
1
Q1
R-72XX
R-73XX
R-74XX
9, 10, 11
12
5, 6, 7,8
(Adjust down)
R2
(Adjust up)
Add a blocking diode to
Vout if current can flow
backwards into the output, as this can damage
the converter..
C2
100µF/10V
(REQ`D)
Com
Com
166
Vout
R1
27-March-2007
www.recom-international.com
INNOLINE
R-7xxxP_D
Series
DC/DC-Converter
Output Current vs Input Voltage
Ambient Temperature (°C)
How to calculate the max output current
The internal power dissipation(PD)follows the equation:
PD = Io × Vo × (1-η)
Io = PD / Vo × (1-η)
Where
PD = Internal power dissipation
Io = Output current
Vo = Output voltage
η = Efficiency
Example: R-745.0P , at Vin = 28Vdc , Vo = 5Vdc ,η=91% (see "Selection Guide" table)
(a) When Ta = 60°C , PD = 1.4 Watt (see beside diagram)
Io = 1.4(W) / 5(V) × (1-0.91) = 3.11(A)
(b) When Ta = 85°C , PD = 1 Watt (see beside diagram)
Io = 1(W) / 5(V) × (1-0.91) = 2.222(A)
(c) At Vin = 12Vdc efficiency = 94% (see "Selection Guide" table)
When Ta = 85°C , PD = 1 Watt (see beside diagram)
Io = 1(W) / 5(V) × (1-0.94) =3.33(A)
90
85
80
60
40
20
0
0.5
1
1.4
Internal Power Dissipation (W)
Characteristics
R-72xx / R-73xx
Ripple VS Vin
R-72xx / R-73xx
Efficiency VS Vin
R-74xx
Ripple VS Vin
50
Vo=15V
Vo=12V
Vo=6.5V
Vo=9V
Vo=5V
( Vo )
5
10
15
20
25
5V
50
3.3V
( Vo )
28
5
Vin ( V )
10
15
20
25
50
Efficiency (%)
Ripple (mV)
Vo=3.3V
6.5V
Ripple (mV)
25
( Vo )
5
28
Ripple Vs Vin
R-72xx / R-73xx / R-74xx
Efficiency / Load Vin=Min
20
25
28
R-72xx / R-73xx / R-74xx
Efficiency / Load Vin=Max
100
Vo=6.5V
Vo=5V
Vo=3.3V
15
Efficiency Vs Vin
Ripple Vs Vin
100
10
Vin ( V )
Vin ( V )
R-74xx
Efficiency VS Vin
15V
6.5V
5V
3.3V
100
100
100
6.5V
5.0V
3.3V
90
15V
5.0V
3.3V
90
80
5
10
15
20
25
Vin ( V )
28
80
( Vo )
70
1
3
2
Efficiency Vs Iout (Vin=Min)
4
Efficiency (%)
( Vo )
Efficiency (%)
Efficiency (%)
50
60
( Vo )
1
3
2
Efficiency Vs Iout (Vin=Max)
4
Efficiency Vs Vin
www.recom-international.com
27-March-2007
167
INNOLINE
R-7xxxP_D
Series
DC/DC-Converter
Package Style and Pinning (mm)
SIP12 PIN Package
3rd angle
projection
32.20
15.00
32.20
9.1
RECOM
R-723.3P
0.7
0.2
1 2 3 4 5 6 7 8 9 10 11 12
4.0
2.13
RECOM
R-723.3D
15.00
1 2 3 4 5 6 7 8 9 10 11 12
9.1
2.54
2.13
0.7
2.54
0.2
Bottom
View
Bottom
View
0.7
4.0
0.7
Pin Connections
Pin #
Name
1
ON / OFF
Description
Input pin : Active low (less than 0.8V) to disable the device
2, 3, 4
Vin
Power input
5, 6, 7, 8
GND
Input and output ground (common)
9 , 10, 11
Vout
Power output
12
Vout-Adj
With external resistors R1,R2 to selected output voltage
Tolerance: ± 0.25 mm
168
27-March-2007
www.recom-international.com
R-7xxxP_D
Series
INNOLINE
DC/DC-Converter
Table 1: Adjustment Resistor Values
2A DC
R-723.3P/D
R-725.0P/D
R-726.5P/D
R-729.0P/D
R-7212P/D
R-7215P/D
3A DC
R-733.3P/D
R-735.0P/D
R-736.5P/D
R-739.0P/D
R-7312P/D
R-7315P/D
4A DC
R-743.3P/D
R-745.0P/D
R-746.5P/D
Vout (nominal)
3.3VDC
12VDC
15VDC
R2
5.0VDC
Vout (adj)
R1
2.5
8.5KΩ
3.0
33KΩ
470Ω
3.2
110KΩ
1.6KΩ
R2
R1
9.0VDC
R2
R1
R2
R1
R2
R1
7.0
560Ω
13KΩ
8.0
330Ω
31KΩ
10
2.2KΩ
20KΩ
11
390Ω
47KΩ
13
2.4KΩ
36KΩ
14
390Ω
76KΩ
3.3
R1
6.5VDC
R2
2.2KΩ
3.4
36KΩ
3.0KΩ
3.6
11KΩ
4.7KΩ
3.9
4.7KΩ
8.5KΩ
4.5
1.6KΩ
30KΩ
4.9
820Ω
220KΩ
5.0
680Ω
5.1
560Ω
28KΩ
12KΩ
5.5
190Ω
2.6KΩ
20KΩ
6.0
11KΩ
47KΩ
6.5
9.0
12
15
16
2.6KΩ
17
860Ω
18
www.recom-international.com
27-March-2007
169
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
●
World’s Most Compact High
Voltage Power Supplies
Full SMD-Design with Ceramic Capacitors
for Highest Reliability
Positive or Negative Polarity Models
Shielded Metal Case
Low Ripple & Temperature Coefficient
Remote Voltage Programming 0 to 100%
Continuous Short Circuit Protection
2-Year Product Warranty
Input Voltage Special Request
Efficiency to 65%
Selection Guide
Part
Number
SIP
Input
Range
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
R12-180 S 15 P
12 ( 10.8 – 13.2 )
0...+180
15
R12-300 S 10 P
12 ( 10.8 – 13.2 )
0...+300
10
R12-350 S 07 P
12 ( 10.8 – 13.2 )
0...+350
7
R24-180 S 15 P
24 ( 21.6 – 26.4 )
0...+180
15
R24-300 S 10 P
24 ( 21.6 – 26.4 )
0...+300
10
R24-350 S 07 P
24 ( 21.6 – 26.4 )
0...+350
7
R12-180 S 15 N
12 ( 10.8 – 13.2 )
0...–180
15
R12-300 S 10 N
12 ( 10.8 – 13.2 )
0...–300
10
R12-350 S 07 N
12 ( 10.8 – 13.2 )
0...–350
7
R24-180 S 15 N
24 ( 21.6 – 26.4 )
0...–180
15
R24-300 S 10 N
24 ( 21.6 – 26.4 )
0...–300
10
R24-350 S 07 N
24 ( 21.6 – 26.4 )
0...–350
7
INNOLINE
DC/DC-Converter
Rxx-S
Series
2 ~ 2.5 Watt
Single
Output
Notes:
1. Adjustable with external voltage 0 to +4VDC or with 5k. variable resistor. See below for details.
2. “N” for Negative.
3. “P” for Positive.
Specifications
( typical at 25°C, nominal input voltage, rated output current unless otherwise specified )
Output Voltage Accuracy
±5%
Rated Power
2 ~ 2.5 Wat max.
Voltage Adjustment Range ( see note 1 )
0-100%
Line Voltage Regulation
±0.03%
Load Voltage Regulation ( 0% to 100% full load )
±0.08%
Output Ripple and Noise (20MHz limited)
30mVp-p max.
Efficiency at Full Load
60 ~ 65%
Operating Temperature Range (free air convection)
-10°C to +60°C
Storage Temperature Range
-25°C to +85°C
Package Weight
170
46g
July-2006
www.recom-international.com
INNOLINE
Rxx-S
Series
DC/DC-Converter
Connection Diagram
For remote control by variable resistor
100
1
C1
47µF
2
-Vin
6
3
4
Vref Vadj
80
Vout
R12-180 S xx
R12-300 S xx
R12-350 S xx
C2
4700 pF
Output Voltage (%)
+Vin
Load
Com
5
R2 R1
60
40
20
0
VR = 5 kW
R1 0W
R2 5kW
R2 5kW
R1 0W
Resistance Control
For remote voltage control
1
C1
47µF
2
-Vin
6
R12-180 S xx
R12-300 S xx
R12-350 S xx
4
3
(open)
+
Vref Vadj
100
Vout
C2
4700 pF
5
80
Load
Com
Output Voltage (%)
+Vin
_
Remote Voltage Control 0 -4V
60
40
20
0
1V
2V
3V
4V
Voltage Control
Package Style and Pinning
3rd angle
projection
80.00
12.00
RECOM
R12-180 S 15 P
19.80
25.00
5.20
3 x 2.54
27.94
15.24
2.00
17.78
40.00
Pin Connections
0.65
Bottom View
1 23 4
5
6
Pin #
Out
1
+Vin
2
–Vin
3
V adj.
4
V ref.
5
–Vout
6
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
www.recom-international.com
July-2006
171
Features
Unregulated
Converters
●
●
●
●
●
●
●
INNOLINE
Triple Outputs (-24V, -48V &-72V)
Input/Output 1kVDC Isolation
Industrial Temperature Range
UL94V-0 Package Material
Internal SMD Construction
No External Components required
Efficiency to 80%
DC/DC-Converter
RxxTR...
Series
Selection Guide 5V and 12V Input Types
Part
Number
Nom. Input
Voltage
SIP 8
Output
Rated Output
Voltage
(VDC)
R05TR244872
5
R12TR244872
12
(VDC)
-24
-48
-72
-24
-48
-72
Vo1
Vo2
Vo3
Vo1
Vo2
Vo3
Output Current 1)
Min
Full
Load
Load
(mA)
1.4
0.7
0.5
1.4
0.7
0.5
(mA)
42
21
14
42
21
14
Output Current 2)
Min
Full
Load
Load
(mA)
4.2
2.1
1.4
4.2
2.1
1.4
3 Watt
SIP8
Triple Output
(mA)
126
63
42
126
63
42
1). Assuming all 3 channels are equally loaded.
2). Assuming only 1 channel is loaded.
Absolute Maximum Ratings
Input Voltage VIN
05V types
12V types
7VDC
15VDC
Short Circuit Duration 3)
1s
Control Voltage, SD
VIN
Operating Temperature Range (all output types)
–40°C min. to +85°C
Lead Temperature 1.5mm from Case for 10 seconds
300°C
Output Power Delivery
3W
3). Supply voltage must be discontinued at the end of the short circuit duration.
Specifications (measured at TA=25°C,
at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range VIN (continuous operation) 5V types
12V types
5V types
12V types
Zero Load Input Current (ICCZL)
5V types, 0% output load
12V types, 0% output load
50mA typ. / 80mA max.
27.5mA typ. / 50mA max.
Internal Power Dissipation (PDISS)
5V types, 0% output load
12V types, 0% output load
250mA typ. / 400mA max.
490mA typ. / 600mA max.
Shut Down Operating Threshold
Switch voltage (VSD)
Sink current (ISD)
1.30V min. / 1.90V max.
170µA min. / 300µA max.
Shut Down Pin Current Sink
5V types, VSD = 5.0V
12V types, VSD = 12.0V
Input Quiescent Current During Shut Down
Output Current (IOUT) From any single 24V output
Single Channel Voltage Setpoint Accuracy
0.80mA min. / 1.10mA max.
0.80mA min. / 1.10mA max.
5V types, VSD = 5.0V
12V types, VSD = 12.0V
Total Rated Power (POUT) Total of all outputs or any single output
POUT = 100mW
POUT = 3mW
Derating-Graph
85mA
66mA
9mA typ. / 14mA max.
7mA typ. / 15mA max.
0.1W min. / 3.0W max.
4.2mA min. / 126mA max.
(Ambient Temperature)
100
80
Output Power (%)
Ripple Current (IRIPPLE)
4.5VDC min. / 5.5VDC max.
10.8VDC min. / 13.2VDC max.
60
40
Safe Operating Area
20
0
-40
0
50
85
Operating Temperature °C
100
150
0% min. / 10% max.
7.5% min. / 2.5% max.
continued on next page
172
July-2006
www.recom-international.com
INNOLINE
RxxTR244872
Series
DC/DC-Converter
Specifications (measured at TA=25°C, at nominal input voltage and rated output current unless otherwise specified)
Output Voltage (VOUT) - Vo1
POUT = 100mW
POUT = 3W
24.0V min. / 26.4V max.
22.2 Vmin. / 24.6V max.
Output Voltage (VOUT) - Vo2
POUT = 100mW
POUT = 3W
48.0V min. / 52.8V max.
44.4V min. / 49.2V max.
Output Voltage (VOUT) - Vo3
POUT = 100mW
POUT = 3W
72.0V min. / 79.2V max.
66.6V min. / 73.8V max.
Line Regulation (VIN = 90% to 110% of nominal )
1.01% typ. / 1.2% max.
Load Regulation (10% to 100% full load)
POUT = 100mW to 3W
6% typ. / 15% max.
Ripple and Noise (DC to 20MHz single channel, 24V)
400mVp-p max.
Isolation Voltage (VISOL) (flash tested for 1 second)
1000VDC min.
Isolation Capacitance (CISOL)
5V types, 1 MHz, 1V
12V types, 1 MHz, 1V
65pF
130pF
Insulation Resistance (1000VDC test)
1 GΩ min. /10 GΩ typ.
Leakage Current (IL)
5V types, 220V AC, 50Hz
12V types, 220V AC, 50Hz
4.5µA
10.4µA
Efficiency (all channels or any single channel)
75% min.
Switching Frequency (fOSC)
50kHz min.
Oscillator Voltage Coefficient (fVCO)
VIN = 90% to 110% of nominal
20%
Package Weight
3.85 g
Case Temperature Rise Above Ambient
1 litre static air chamber
27°C typ
Output Voltage Temperature Coefficient (VTCO)
TA = -40°C to TA = +85°C
15mV/°C typ.
Oscillator Temperature Coefficient (fTCO)
TA = -40°C to TA = +85°C
300Hz/°C typ.
Operating Temperature (TA)
–40°C min. / +85°C max.
Storage Temperature Range
MTBF (depending on the type)
–50°C to +125°C max.
1)
– 40°C
+25°C
+85°C
}
174 x 10³hours min.
145 x 10³hours min.
121 x 10³hours min.
Detailed Information see
Application Notes chapter "MTBF"
1). Calculated using MIL-HDBK-217F with nominal input voltage at full load.Please contact us, if you need exact parameters for the converter you have selected.
Typical Characteristics, Tolerance Envelope
Tolerance Envelope
Thermal Characterisation
R05TR244872
R12TR244872
-60
-20
20
60
100
140
70
69
68
67
R12TR244872
86
1.6
82
1.2
78
74
20
-20
20
60
60
Temperature (°C)
www.recom-international.com
100
140
Typica
l
Load L
ine
100
140
+5%
– 0,5%
– 5%
10%
50%
100%
Output Load Current (%)
R12TR244872
2.0
Ripple Voltage (V)
Efficiency (%)
R05TR244872
-20
-60
Temperature (°C)
Temperature (°C)
-60
V Nom.
Output Voltage
90
70
+4.5%
71
110
90
+10%
72
130
70
R05TR244872
R12TR244872
73
Output Voltage (V)
Switching Frequenzcy (kHz)
150
R05TR244872
0.8
0.4
0
-60
-20
20
60
100
140
Temperature (°C)
July-2006
173
INNOLINE
RxxTR244872
Series
DC/DC-Converter
Typical Characteristics
Channel Vo2 (nominal 48V)
100
80
80
80
60
60
60
40
40
40
20
Efficiency (%)
100
0
20
0.5 1.0 1.5 2.0 2.5 3.0
0
Output Power (W)
20
0
0.5 1.0 1.5 2.0 2.5 3.0
80
120
36
72
108
32
64
96
24
20
0
0.5 1.0 1.5 2.0 2.5 3.0
Output Power (W)
Output Voltage (V)
40
28
56
48
40
0
0.5 1.0 1.5 2.0 2.5 3.0
Output Power (W)
Output Power (W)
Output Voltage (V)
Output Voltage (V)
Channel Vo3 (nominal 72V)
100
Efficiency (%)
Efficiency (%)
Channel Vo1 (nominal 24V)
0.5 1.0 1.5 2.0 2.5 3.0
Output Power (W)
84
72
60
0
0.5 1.0 1.5 2.0 2.5 3.0
Output Power (W)
Package Style and Pinning (mm)
3rd angle
projection
8 PIN SIP Package
21.80
11.10
9.20
RECOM
R05TR244872
****
Triple Output
RECOM
R05TR244872
****
0.50±0.05
4.10
1 2 3
0.50±0.05
2.54
Recommended Footprint Details
1.25 typ.
2.10
2.54
1.0ø+0.15/–0
0.25±0.05
Bottom View
2.54
Top View
5 6 7 8
Pin Connections
Pin #
Triple
1
+Vin
2
-Vin
3
SD (Shut Down)
5
Com
6
Vo1
7
Vo2
8
Vo3
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
174
July-2006
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
Compact High Voltage Power Supplies
5 Watt in Low Profile DIP24 Package
3000VDC Isolation
Remote Voltage Programming by External
Voltage or Resistance
Continuous Short Circuit Protection
Cascadeable to generate Output Voltages of
up to 420VDC
Efficiency to 86%
INNOLINE
DC/DC-Converter
Rxx100_150A
Series
5 Watt
Single
Output
Selection Guide
Part
Number
DIP 24
Input
Range
(VDC)
Output
Voltage (1)
(VDC)
Output
Current (2)
(mA)
R12-100A
12 ( 10 – 14 )
+55...+135
50
R15-100A
15 ( 13 – 17 )
+55...+135
50
R24-100A
24 ( 21 – 27 )
+55...+135
50
R12-150A
12 ( 10 – 14 )
+95...+210
50
R15-150A
15 ( 13 – 17 )
+95...+210
50
R24-150A
24 ( 21 – 27 )
+95...+210
50
Notes:
1. Adjustable with external voltage 0 to +4VDC or with 5k. variable resistor. See below for details.
2. Maximum Power Dissipation is 5W.
Specifications
( typical at 25°C, nominal input voltage, rated output current unless otherwise specified )
Input Voltage Range
Rated Power
Voltage Adjustment Range ( see note 1 )
10..14 or 13..17 or 21..27VDC
50mA max. or 5 Watts max.
55..135 or 95..210VDC
Minimum Load for proper regulation
10mA
Output Voltage Accuracy
±5% max
Line Voltage Regulation
0.2% max
Load Voltage Regulation ( 20% to 100% full load )
0.3% max
Derating Graph
(Ambient Temperature)
125
Operating Frequency
200kHz typ.
100
Efficiency at Full Load
80 ~ 86%
Isolation Voltage (tested for 1 second)
3000VDC min.
Isolation Capacitance
20pF typ.
Isolation Resistance
Short Circuit Protection
1 MΩ min.
Continuous, Automatic Restart
Short Circuit Input Current
Operating Temperature Range (free air convection, with derating)
Storage Temperature Range
MTBF
www.recom-international.com
30mA typ.
-25°C to +85°C
Output Power (%)
100mVp-p max.
Output Ripple and Noise (20MHz limited)
60
75
50
25
Natural Convection
0
-25
-10 0
50 60 70
65
80 90 100
Ambient Temperature Range (°C)
-50°C to +125°C
1635 x 10³hours min.
February-2007
175
Rxx-100_150A
Series
INNOLINE
DC/DC-Converter
Typical Applications
For remote control by variable resistor
22,23
2,3
9,16
Max
Vout
R12-150A
C1
47µF
-Vin
12,13
10,15
8,17 Com
C2
4700 pF,
250VDC
Load
Vref Vadj
Output Voltage
+Vin
Min
R2 R1
R1 0W
R2 5kW
5kW
0W
Resistance Control
VR = 5 kW
For remote voltage control
12,13
22,23
R24-150A
C1
47µF
2,3
-Vin
(GND)
10,15
8,17
9,16
Max
Vout
Com
C2
4700 pF,
250VDC
Load
Vref Vadj
(open)
+
_
Remote Voltage Control 0 -4V
+Vin
22,23
Vout
U1
C1
47µF
2,3
-Vin
12,13
9,16
Link -Vin and Com for GND- based
Remote Voltage Control
(Output is no longer isolated)
10,15
8,17 Com
C3
4700 pF,
250VDC
Load
2,3
9,16
2V
3V
4V
Voltage Control
U1
U2
Vout Range
Rxx-100A
Rxx-100A
190~270
Rxx-150A
Rxx-100A
230~345
Rxx-150A
Rxx-150A
305~420
Vout
U2
C2
47µF
1V
Note: When cascaded, only one Rxx-A
may be adjustable, the other must be
fixed voltage.
5 kW
12,13
Min
Cascade Combinations
Vref Vadj
22,23
Output Voltage
+Vin
10,15
8,17 Com
C4
4700 pF,
250VDC
Vref Vadj
R2 R1
VR = 5 kW
176
February-2007
www.recom-international.com
Rxx-100_150A
Series
INNOLINE
DC/DC-Converter
Typical Characteristics
R24-100A
R24-100A
100
Efficiency (%)
Output Ripple (mVp-p)
100
50
0
60
70
80
90
0
100 110 120 130
Load = 50mA or 5W max.
50
60
70
80
100 110 120 130
Efficiency Vs Output Voltage ( Vin=Nom.)
Output Ripple Vs Output Voltage ( Vin=Nom.)
R24-100A
R24-100A
Max. Output Current (mA)
5
Output Power (Watt)
90
Output Voltage ( V )
Output Voltage ( V )
4
3
2
60
40
20
1
0
0
60
70
80
90
60
70
80
90
100 110 120 130
Output Voltage ( V )
Temperature ( °C )
Max. Output Current Vs Output Voltage ( Vin=Nom.)
Output Power Vs Temperature ( Vin=Nom.)
Package Style and Pinning
3rd angle
projection
20.30
31.80
9.40
4.10
0.51
4.60
Pin Connections
15.24
1.00 ø+0.15/–0
8 9 10
2 3
12
17 16 15
-Vin
8,17
Vadj
9,16
V ref
10,15
-Vout
12,13
+Vout
22,23
+Vin
2.54
13
2.54
www.recom-international.com
Out
2,3
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Bottom View
23 22
Pin #
February-2007
Top View
177
Features
●
●
●
●
●
●
●
●
●
●
Single Outputs up to 15A
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
No Minimum Load
Under -Voltage Lockout
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 61.0 x 57.91 x 12.7mm Package
High Efficiency to 91%
INNOLINE
DC/DC-Converter
RP50-S
Series
50 Watt
Single
Output
Selection Guide
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Line
Load
Current Regulation Regulation
(A)
(mV)
(mV)
Input Efficiency
Current
(A)
%
RP50-241.8S
18 – 36
1.8
15
4
6
1.36
86
RP50-242.5S
18 – 36
2.5
15
5
8
1.86
87
RP50-243.3S
18 – 36
3.3
15
7
10
2.40
89
RP50-2405S
18 – 36
5
10
10
15
2.40
90
RP50-2415S
18 – 36
15
3.3
30
45
2.40
89
RP50-481.8S
36 – 75
1.8
15
4
6
1.36
87
RP50-482.5S
36 – 75
2.5
15
5
8
1.86
89
RP50-483.3S
36 – 75
3.3
15
7
10
2.40
90
RP50-4805S
36 – 75
5
10
10
15
2.40
91
RP50-4815S
36 – 75
15
3.3
30
45
2.40
90
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. Measured with a 1uF M/C and a 10µF T/C.
3. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A
ripple current for 48V/24V models. RECOM suggests: Nippon chemi-con KMF series, 220µF/100V, ESR 90mΩ.
4. The negative/ positive logic and pin length are optional ( see table ). The pin voltage is referenced to
negative input.
5. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
6. The RP50 meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
7. Maximum value at nominal input voltage and full load.
8. Typical value at nominal input voltage and full load.
9. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
10. The converter is provided by basic insulation.
11. “N” for Negative remote ON/OFF.
12. “P” for Positive remote ON/OFF.
178
July-2006
www.recom-international.com
INNOLINE
RP50-S
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Unde-Voltage Lockout Start-up Voltage
Unde-Voltage Lockout Shuntdown Voltage
Input Filter (Note 3)
Input voltage variation
18 - 36, 36-75VDC
24V input
48V input
24V input
48V input
dv/dt
(24, 48V nom.)
17V typ.
34V typ.
15V typ.
32V typ.
L-C type
5V/ms max
(Complies with ETS300 132 part4.4)
50VDC
100VDC
Input Surge Voltage 100mS max
24V input
48V input
Start up time
Nominal Vin and constant resistive load
Input Reflected-Ripple Current
24V input
50mAp-p
(5Hz to 20Hz, 12µH Source inpedance)
Remote ON/OFF (Note 4)
(Positive logic)
48V input
20mAp-p
(Negative logic)
ON=Open or 3.0V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.0V < Vr < 15V,
Continuous Output Power
25mS typ.
IIN=50µA max.
IIN=1mA max.
IIN=1mA max.
IIN=50µA max.
50W max.
Output Voltage Accuracy (full load and nominal Vin)
±1.5%
Output Voltage Adjustment (Note 1)
+10%, -20%
Minimum Load
0%
Line Regulation
low line to high line at full load
See table
Load Regulation
0% to 100% full load
See table
Remote Sense (Note 1)
10% of Vout
Ripple and Noise 20MHz bandwidth (Note 2)
100mVp-p
Temperature Coefficient
±0.02%/ºC
Transient Response Recovery Time (25% load step change)
200µs
Over Voltage Protection threshold (Hiccup)
115% ~ 130% of Vout
Over Current Protection threshold
110% ~ 140% of Iout Rated
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
up to 91%.
1600VDC min.
1000VDC min.
1000VDC min.
7
Isolation Resistance
10
Ω
min.
Isolation Capacitance
2500pF max.
Operating Frequency
300KHz typ.
Operating Temperature Range
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Continued next page
www.recom-international.com
July-2006
179
RP50-S
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
X, Y and Z
Conducted Emissions
EN55022 (Note 7)
Level A
EN55022 (Note 7)
Level B
Radiated Emisssions
EN55022
Level A
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
50g
3
MTBF Bellcore TR-NWT-000332, Tc=40°C, Io=80% max.
3000 x10 hours
Characteristics
Efficiency vs Output Load
for 5V only
100
90
Efficiency (%)
80
70
60
50
10
20
30
40
50
70
60
80 90 100
Output Power (%) Ta=25°C
48V Input Without Heatsink
48V Input With Heatsink (7G-0022)
110
110
1.) LFM590
2.) LFM400
3.) LFM200
Output Power (%)
50
4.) LFM20
30
10
-40
-20
0
20
40
60
90
1 2 34
80
50
4.) LFM20
30
10
-40
100
Ambient Temperature (°C)
180
1.) LFM590
2.) LFM400
3.) LFM200
70
Output Power (%)
90
70
-20
0
20
40
60
80
1 2 34
100
Ambient Temperature (°C)
July-2006
www.recom-international.com
INNOLINE
RP50-S
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
60.96
57.91
12.70
Side View
5.08
50.80
48.26
4xM3 x 0.5 ( Note 10)
Pin Connections
5
1
2
35.56
6
Bottom View
15.24
25.40
7
3
8
4
9
17.78
10.16
External Output Trimming
7
6
8
Trim Down
RD
RU
7
Pin Ø
1.016 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
Product Options Table
Output can be externally trimmed by using the method
shown below.
Trim Up
Pin #
Function
1
–Vin
2
Case
3
Remote ON/OFF
4
+Vin
5
–Vout
6
–Vsense
7
Trim
8
+Vsense
9
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
Option
Suffix
Negative remote ON/OFF logic, 0.20” pin length (standard)
Negative remote ON/OFF logic, 0.145” pin length
L
Negative remote ON/OFF logic, 0.11” pin length
K
Positive remote ON/OFF logic, 0.20” pin length
P
Positive remote ON/OFF logic, 0.145” pin length
S
Positive remote ON/OFF logic, 0.11” pin length
M
Example: RP50-483.3S/P
www.recom-international.com
July-2006
181
Features
●
●
●
●
●
●
●
●
●
●
Single Outputs up to 20A
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
No Minimum Load
Under -Voltage Lockout
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 36.83 x 57.91 x 12.7mm Package
High Efficiency to 91%
INNOLINE
DC/DC-Converter
RP50-SB
Series
50 Watt
Single
Output
Selection Guide
Efficiency (5)
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
Load
Regulation
(mV)
RP50-481.8SB
36 – 75
1.8
20
5.4
87
RP50-482.5SB
36 – 75
2.5
20
7.5
89
RP50-483.3SB
36 – 75
3.3
15
10
90
RP50-4805SB
36 – 75
5.0
10
15
91
%
* add suffix “P” for positive logic ON/OFF control.
Description
The RP50-SB Series has been specifically designed for low voltage silicon applications. A wide input voltage range, output voltage trim and sense inputs are all standard features. The converters also benefit
from comprehensive over-current, over-voltage and over-temperature protection.
The RP50-SB is ideally suited to telecom, network and industrial applications.
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. Standard is negative remote ON/OFF, add suffix“P” for positive remote ON/OFF.
3. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
4. The RP50-SB meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
5. Typical value at nominal input voltage and full load.
6. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
182
July-2006
www.recom-international.com
RP50-SB
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Under-Voltage Lockout
36-75VDC
Power Up
Power Down
Input Filter
Input Surge Voltage 100ms max
Start up time
Remote ON/OFF (Note 2)
(Positive logic)
(Negative logic)
L-C type
100VDC
Nominal Vin and constant resistive load
ON=Open or 3.0V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.0V < Vr < 15V,
Continuous Output Power
Output Voltage Accuracy
(48V nom.)
34V typ.
32V typ.
25ms typ.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
50W max.
full load and nominal Vin
Output Voltage Adjustment (Note 1)
±1.5%
+10%, -20%
Minimum Load
0%
Line Regulation
low line to high line at full load
Load Regulation
0% to 100%full load
Remote Sense (Note 1)
Ripple and Noise 20MHz bandwidth
With 10µF tantalum and 1µF ceramic across output
100mVp-p
±0.02%/ºC
25% load step change
Over Voltage Protection threshold (Hiccup)
200µs
120% of Vout
Over Current Protection threshold
110% ~ 140% of Iout Rated
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
See table
10% of Vout
Temperature Coefficient
Transient Response Recovery Time
±0.2%
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
up to 91%.
1600VDC min.
1000VDC min.
1000VDC min.
7
Isolation Resistance
10
Ω
min.
Isolation Capacitance
2500pF max.
Operating Frequency
270KHz typ.
Operating Temperature Range (Note 3)
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
X, Y and Z
Humidity
Non Condensing
95% max.
Conducted Emissions
EN55022 (Note 4)
Level A
EN55022 (Note 4)
Level B
EN55022 (Note 4)
Level A
Radiated Emisssions
Continued on next page
www.recom-international.com
July-2006
183
RP50-SB
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
42g
3
MTBF Bellcore TR-NWT-000332, Tc=40°C, Io=80% max.
2500 x 10 hours
Characteristics
Efficiency Input Voltage
RP50-4805SB
Efficiency Output Current Iout
RP50-4805SB
95
95
94
90
93
92
85
80
75
90
89
Efficiency (%)
Efficiency (%)
91
88
87
40
44
48
52
56 60
64
68
1.0
72 75
1=20LFM, 2=200LFM, 3=300LFM,
4=400LFM, 5=500LFM
120
1 2 345
6.0 7.0 8.0 9.0 10.0
1=20LFM, 2=200LFM, 3=300LFM,
4=400LFM, 5=500LFM
1 23 45
100
80
Forced Convection
40
20
Output Power (%)
80
Output Power (%)
4.0 5.0
Input With Heatsink (7G-0022)
RP50-4805SB
Input Without Heatsink
RP50-4805SB
100
2.0 3.0
Output Current, Iout (A)
Output Current, Iout (A)
60
Forced Convection
40
20
0
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
184
36Vin
60
50
36
60
48Vin
65
55
86
85
120
75Vin
70
July-2006
www.recom-international.com
RP50-SB
Series
INNOLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
36.83
57.90
Side View
12.70
5.08
50.8
3.55
3.55
1.57
1.016
4xM3 x 0.5 ( Note 6)
Pin Connections
Pin #
4
5
6
7
8
1
26.16
15.24
2
Bottom View
3
7.62
15.24
5.33
5.33
Function
1
–Vin
2
Remote ON/OFF
3
+Vin
4
–Vout
5
–Vsense
6
Trim
7
+Vsense
8
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
47.24
External Output Trimming
Output can be externally trimmed by using the method
shown below.
Trim Resistor Calculation:
7
Trim Up
6
Trim Down
RD
RU
8
Rup (kΩ) = 5.1Vout (100+∆%) - 510 -10.2
1.225∆%
∆%
Rdn (kΩ) = 510 -10.2
∆%
7
www.recom-international.com
July-2006
185
Features
●
●
●
●
●
●
●
●
Single Output up to 20A
Dual Outputs Total Current up to 15A
up to 100% Load Imblance
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage, Independently
Regulated Outputs
No Minimum Load
Industry Standard Footprint
Halt Tested
Compact 61.0 x 57.91 x 12.7mm Package
High Efficiency to 90%
Selection Guide
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
RP75-481.8S
36 – 75
1.8
20
4
RP75-482.5S
36 – 75
2.5
20
RP75-483.3S
36 – 75
3.3
20
RP75-4805S
36 – 75
5
RP75-4815S
36 – 75
15
Part
Number
Dual Output
Input
Voltage
(VDC)
Line
Load
Regulation Regulation
(mV)
(mV)
Input Efficiency
Current
(A)
%
6
915
86
5
8
1255
88
7
10
1618
90
15
10
15
1838
90
5
30
45
1860
90
Output
Voltage
V1
V2
(VDC)
(VDC)
Output
Current
INNOLINE
DC/DC-Converter
RP75-S_DI
Series
75 Watt
Isolated
Single &
Dual Output
Line
Load Efficiency
Regulation Regulation
I1
(A)
I2
(A)
(mV)
(mV)
%
RP75-483.305DI
36 – 75
5
3.3
15
15
7/10
10/15
88
RP75-483.32.5DI
36 – 75
3.3
2.5
15
15
7/5
10/8
81
RP75-48051.8DI
36 – 75
5
1.8
15
15
10/4
10/15
85
RP75-483.31.8DI
36 – 75
3.3
1.8
15
15
7/4
10/6
81
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout and likewise the -Vsense should be connected
to its corresponding -Vout..
2. Measured with a 1µF M/C and a 10uF M/C(for dual outputs) or 1µF M/C and a 10µF T/C(for single outputs).
3. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple
current for 48V models. RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90mΩ.
4. The negative / positive logic and length are optional ( see table ). The pin voltage is referenced to negative input.
5. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at Tc=40°C.
(Ground fixed and controlled environment)
6. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
7. The RP75 meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
8. Maximum value at nominal input voltage and full load.
9. Single:Typical value at nominal input voltage and full load.
Dual:The efficiency test condition: Nominal input voltage and both outputs current are 7.5A.
10. BASEPLATE GROUNDING:Base-plate should be grounded at one of the four screw bolts prior to operation.
11. The converter is provided by basic insulation.
12. “N” for Negative remote ON/OFF.
13. “P” for Positive remote ON/OFF.
186
July-2006
www.recom-international.com
INNOLINE
RP75-S_DI
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Unde-Voltage Lockout Start-up Voltage
Unde-Voltage Lockout Shuntdown Voltage
36-75VDC
48V input
48V input
Input Filter (Note 3)
Input voltage variation
dv/dt
Input Surge Voltage 100ms max
48V input
Start up time
Nominal Vin and constant resistive load
25ms typ.
Input Reflected-Ripple Current
48V input
20mAp-p
(5Hz to 20Hz, 12µH Source inpedance)
Remote ON/OFF (Note 4)
(Positive logic)
(Negative logic)
ON=Open or 3.0V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.0V < Vr < 15V,
Continuous Output Power
48V nom.
34V typ.
32V typ.
L-C type
5V/ms max
(Complies with ETS300 132 part4.4)
100VDC
IIN=50µA max.
IIN=1mA max.
IIN=1mA max.
IIN=50µA max.
75W max.
Output Voltage Accuracy (full load and nominal Vin)
Output Voltage Adjustment
±1.5%
Single (Note 1)
+10%, -20%
Dual
+10%, -10%
Minimum Load
0%
Line Regulation
low line to high line at full load
See table
Load Regulation
0% to 100% full load
See table
Remote Sense (Note 1)
10% of Vout
Ripple and Noise 20MHz bandwidth (Note 2)
100mVp-p
Temperature Coefficient
±0.02%/ºC
Transient Response Recovery Time (25% load step change)
200µs
Over Voltage Protection threshold (Non-Latching Hiccup)
115% ~ 130% of Vout
Over Current Protection threshold
Maximum Total Output Current
110% ~ 140% of Iout Rated
I1 + I2 Dual
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
15A
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
up to 90%.
1600VDC min.
1000VDC min.
1000VDC min.
7
Isolation Resistance
10
Ω
min.
Isolation Capacitance
2500pF max.
Operating Frequency
300KHz typ.
Operating Temperature Range
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Continued next page
www.recom-international.com
July-2006
187
RP75-S_DI
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
00Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
Conducted Emissions
EN55022 (Note 7)
Level A
EN55022 (Note 7)
Level B
EN55022
Level A
Radiated Emisssions
X, Y and Z
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
Single
53g
Dual
MTBF ( Note 6 )
57g
3
Single
2000 x10 hours
Dual
1300 x10 hours
3
Characteristics
Efficiency vs Output Load
for 5V only
100
90
Efficiency (%)
80
70
60
50
10
20
30
40
50
70
60
80 90 100
Output Power (%) Ta=25°C
48V Input Without Heatsink
48V Input With Heatsink (7G-0022)
110
110
1.) LFM590
2.) LFM400
3.) LFM200
Output Power (%)
50
4.) LFM20
30
10
-40
-20
0
20
40
60
1
80
90
2 34
50
4.) LFM20
30
10
-40
100
Ambient Temperature (°C)
188
1.) LFM590
2.) LFM400
3.) LFM200
70
Output Power (%)
90
70
-20
0
20
40
60
1
80
2 34
100
Ambient Temperature (°C)
July-2006
www.recom-international.com
INNOLINE
RP75-S_DI
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
Single Output
60.96
57.91
12.70
Side View
5.08
50.80
48.26
4xM3 x 0.5 ( Note 10)
Pin Connections
5
1
2
35.56
6
Bottom View
15.24
25.40
7
3
8
4
9
17.78
10.16
External Output Trimming
7
6
8
Trim Down
RD
RU
7
Pin Ø
1.016 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
Product Options Table
Output can be externally trimmed by using the method
shown below.
Trim Up
Pin #
Function
1
–Vin
2
Case
3
Remote ON/OFF
4
+Vin
5
–Vout
6
–Vsense
7
Trim
8
+Vsense
9
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
Option
Suffix
Negative remote ON/OFF logic, 0.20” pin length (standard)
Negative remote ON/OFF logic, 0.145” pin length
L
Negative remote ON/OFF logic, 0.11” pin length
K
Positive remote ON/OFF logic, 0.20” pin length
P
Positive remote ON/OFF logic, 0.145” pin length
S
Positive remote ON/OFF logic, 0.11” pin length
M
Example: RP75-483.3S/P
www.recom-international.com
July-2006
189
INNOLINE
RP75-S_DI
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
Dual Output
60.96
57.91
5.08
12.70
Side View
50.80
48.26
4xM3 x 0.5 ( Note 10)
Pin Connections
5
1
6
35.56
2
Bottom View
7
25.40
10.16
15.24
40.64
8
3
9
4
Product Options Table
Option
Output can be externally trimmed by using the method
shown below.
( ) for V2 output trim
Trim Up
10(7)
190
8(5)
Suffix
Negative remote ON/OFF logic, 0.20” pin length (standard)
Trim Down
RD
RU
10(7)
Pin Ø
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
1.016 mm
10
External Output Trimming
9(6)
Pin #
Function
1
–Vin
2
Case
3
Remote ON/OFF
4
+Vin
5
+V2
6
–V2 (Com)
7
V2 Trim
8
+V1
9
+V1 (Com)
10
V1 Trim
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
Negative remote ON/OFF logic, 0.145” pin length
L
Negative remote ON/OFF logic, 0.11” pin length
K
Positive remote ON/OFF logic, 0.20” pin length
P
Positive remote ON/OFF logic, 0.145” pin length
S
Positive remote ON/OFF logic, 0.11” pin length
M
Example: RP75-483.305I/N
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
Single Outputs up to 25A
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
No Minimum Load
Under -Voltage Lockout
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 36.83 x 57.91 x 12.7mm Package
High Efficiency to 91%
INNOLINE
DC/DC-Converter
RP75-SB
Series
75 Watt
Single
Output
Selection Guide
Efficiency (5)
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
Load
Regulation
(mV)
RP75-481.8SB
36 – 75
1.8
25
5.4
85
RP75-482.5SB
36 – 75
2.5
25
7.5
87
RP75-483.3SB
36 – 75
3.3
20
10
90
RP75-4805SB
36 – 75
5.0
15
15
90
%
Add suffix “P” for positive logic ON/OFF control.
Description
The RP75-SB Series has been specifically designed for low voltage silicon applications. A wide input voltage range, output voltage trim and sense inputs are all standard features. The converters also benefit
from comprehensive over-current, over-voltage and over-temperature protection.
The RP75-SB is ideally suited to telecom, network and industrial applications.
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. The pin voltage is referenced to negative input.
3. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
4. The RP75-SB meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
5. Typical value at nominal input voltage and full load.
6. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
www.recom-international.com
July-2006
191
INNOLINE
RP75-SB
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Under-Voltage Lockout
36-75VDC
Power Up
Power Down
Input Filter
Input Surge Voltage 100ms max
Start up time
Remote ON/OFF (Note 2)
(Positive logic)
(Negative logic)
L-C type
100VDC
Nominal Vin and constant resistive load
ON=Open or 3.0V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.0V < Vr < 15V,
Continuous Output Power
Output Voltage Accuracy
Full load and nominal Vin
±1.5%
0%
Line Regulation
low line to high line at full load
Load Regulation
0% to 100% full load
Remote Sense (Note 1)
±0.2%
See table
10% of Vout
With 10µF tantalum and 1µF ceramic across Output
Temperature Coefficient
100mVp-p
±0.02%/ºC
25% load step change
Over Voltage Protection threshold (Hiccup)
200µs
120% of Vout
Over Current Protection threshold
110% ~ 140% of Iout Rated
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
IIN=1mA max.
IIN=50µA max.
IIN=1mA max.
IIN=50µA max.
+10%, -20%
Minimum Load
Transient Response Recovery Time
25ms typ.
75W max.
Output Voltage Adjustment (Note 1)
Ripple and Noise 20MHz bandwidth
(48V nom.)
34V typ.
32V typ.
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
see table
1600VDC min.
1000VDC min.
1000VDC min.
Isolation Resistance
10 MΩ min.
Isolation Capacitance
2500pF max.
Operating Frequency
270KHz typ.
Operating Temperature Range (Note 3)
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
X, Y and Z
Humidity
Non Condensing
95% max.
Conducted Emissions
EN55022 (Note 4)
Level A
EN55022 (Note 4)
Level B
EN55022 (Note 4)
Level A
Radiated Emisssions
Continued on next page
192
July-2006
www.recom-international.com
INNOLINE
RP75-SB
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
42g
3
MTBF Bellcore TR-NWT-000332, Tc=40°C, Io=80% max.
2500 x 10 hours
Characteristics
Efficiency Input Voltage
RP75-4805SB
Efficiency Output Current Iout
RP75-4805SB
95
95
94
90
93
92
85
80
90
89
88
87
60
40
44
48
52
56 60
64
68
1.5
72 75
4.5
6
7.5
9 10.5
12 13.5 15
Input With Heatsink (7G-0022)
RP75-4805SB
Input Without Heatsink
RP75-4805SB
1=20LFM, 2=200LFM, 3=300LFM,
4=400LFM, 5=500LFM
1
100
3
Output Current, Iout (A)
Output Current, Iout (A)
120
2 34
5
1=20LFM, 2=200LFM, 3=300LFM,
4=400LFM, 5=500LFM
1
100
2 3 45
80
Forced Convection
40
20
Output Power (%)
80
Output Power (%)
36Vin
65
50
36
60
48Vin
70
55
86
85
120
75Vin
75
Efficiency (%)
Efficiency (%)
91
60
Forced Convection
40
20
0
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
www.recom-international.com
July-2006
193
INNOLINE
RP75-SB
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
36.83
57.90
Side View
12.70
5.08
50.8
3.55
3.55
1.57
4xM3 x 0.5 ( Note 6)
Pin Connections
Pin #
4
5
6
7
8
1
26.16
15.24
2
Bottom View
3
1.016
7.62
15.24
1
2
3
4
5
6
7
8
Function
–Vin
Remote ON/OFF
+Vin
–Vout
–Vsense
Trim
+Vsense
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
5.33
5.33
47.24
External Output Trimming
Output can be externally trimmed by using the method
shown below.
Trim Resistor Calculation:
7
Trim Up
6
194
Trim Down
RD
RU
8
Rup (kΩ) = 5.1Vout (100+∆%) - 510 -10.2
1.225∆%
∆%
7
Rdn (kΩ) = 510 -10.2
∆%
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
Single Output up to 25A
Dual Outputs Total Power up to 100W
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
Under-Voltage Lockout
No Minimum Load
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 61.0 x 57.91 x 12.7mm Package
High Efficiency to 90%
Selection Guide
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
RP100-481.8S
36 – 75
1.8
25
4
6
1157
86
RP100-482.5S
36 – 75
2.5
25
5
8
1608
87
RP100-483.3S
36 – 75
3.3
25
7
10
2022
90
RP100-4805S
36 – 75
5
20
10
15
2480
90
RP100-4815S
36 – 75
15
6.66
30
45
2507
90
Part
Number
Input
Voltage
(VDC)
Output
Voltage
V1 / V2
(VDC)
Output
Current
I1 / I2
(A)
Line
Regulation
V1 / V2
(mV)
Load
Input Efficiency
Regulation Current(8) (9)
V1 / V2
(mV)
(A)
%
RP100-483.305DI
36 – 75
5 / 3.3
20 / 25
25 / 16.5
25 / 16.5
2.39
87
RP100-482.505DI
36 – 75
5 / 2.5
20 / 25
25 / 12.5
25 / 12.5
2.45
85
3.3 / 2.5
25 / 25
16.5 / 12.5
16.5 / 12.5
2.44
85
Dual Output
RP100-482.53.3DI 36 – 75
Line
Load
Regulation Regulation
(mV)
(mV)
Input Efficiency
(9)
Current(8)
(A)
%
INNOLINE
DC/DC-Converter
RP100S_DI
Series
100 Watt
Isolated
Single &
Dual Output
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout and likewise the -Vsense should be connected
to its corresponding -Vout.
2. Single: Measured with a 1µF M/C and a 10µF T/C.
Dual: For each outputs.
3. An external filter capacitor is required for normal operation.
The capacitor should be capable of handing 1A ripple current for 48V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90mΩ.
4. Single: The negative / positive logic and length are optional ( see table ).
The pin voltage is referenced to negative input.
Dual: The ON/OFF control function. There are positive logic ( standard ) and negative logic ( option ).
The pin voltage is referenced to negative input.
To order negative logic ON/OFF control add the suffix-N. ( Ex:RP100-483.305I/N )
5. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40°C.
( Ground fixed and controlled environment )
6. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
7. The RP100 meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
8. Maximum value at nominal input voltage and full load.
9. Typical value at nominal input voltage and full load.
The dual efficiency test condition:
RP100-483.305DI @ 5V/12A and 3.3V/12A
RP100-482.505DI @ 5V/12A and 2.5V/16A
RP100-482.53.3DI @ 3.3V/18A and 2.5V/16A
10. BASEPLATE GROUNDING: Base-plate should be grounded at one of four screw bolts prior to operation.
11. The converter is provided by basic insulation.
12. “N” for Negative remote ON/OFF.
13. “P” for Positive remote ON/OFF.
www.recom-international.com
July-2006
195
INNOLINE
RP100-S_DI
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
36-75VDC
48V nom.
Over-Voltage Lockout Start-up Voltage
Dual
76.5V typ.
Over-Voltage Lockout Shuntdown Voltage
Unde-Voltage Lockout Start-up Voltage
Dual
Single
Dual
Single
Dual
78.5V typ.
34V typ.
35V typ.
32V typ.
33V typ.
Unde-Voltage Lockout Shuntdown Voltage
Input Filter (Note 3)
Input voltage variation
dv/dt
Input Surge Voltage 100ms max
Single
Start up time
Nominal Vin and constant resistive load Single
25ms typ.
Input Reflected-Ripple Current
Single
20mAp-p
(5Hz to 20Hz, 12µH Source inpedance)
Remote ON/OFF (Note 4)
Single (Positive logic)
Single (Negative logic)
Dual (Positive logic)
Dual (Negative logic)
Continuous Output Power
Output Voltage Accuracy (full load and nominal Vin)
Output Voltage Adjustment (Note 1)
L-C type
5V/ms max
(Complies with ETS300 132 part4.4)
100VDC
ON=Open or 3.0V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.0V < Vr < 15V,
ON=Open or 3.0V < Vr < +Vin,
OFF=Short or Vr < 1.2V,
ON=Short or 3.0V < Vr < +Vin,
OFF=Open or Vr < 1.2V.
100W max.
±1.5%
±1.0%
+10%, -20%
±10%
Single
Dual
Single
Dual
Minimum Load
Line Regulation
Load Regulation
IIN=50µA max.
IIN=1mA max.
IIN=1mA max.
IIN=50µA max.
0%
low line to high line at full load
Single 0% to 100%full load
Dual 0% to 100% full load
Dual for each Outputs
Remote Sense (Note 1)
See table
See table
10% of Vout
Ripple and Noise 20MHz bandwidth (Note 2)
100mVp-p
Temperature Coefficient
±0.02%/ºC
Transient Response Recovery Time (25% load step change)
Over Voltage Protection threshold (Hiccup)
Single & Dual
2.5V
3.3V
5V
Over Current Protection threshold
200µs
115% ~ 130% of Vout
3.0V
3.9V
6.2V
110% ~ 140% of Iout Rated
Short Circuit Protection
Hiccup, Automatic recovery
Efficiency (at nominal input voltage, full load)
up to 90%
Continued next page
196
July-2006
www.recom-international.com
RP100-S_DI
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Input to Output
Input to Case
Output to Case
Single
Dual
Single
Dual
Operating Frequency
Operating Base-plate Temperature Range ( Note 6 )
Over Temperature Protection
300KHz typ.
Single
Dual for Base-plate
Storage Temperature Range
95%
Thermal Shock
MIL-STD-810D
Vibration
Conducted Emissions
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
EN55022 (Note 7)
EN55022 (Note 7)
Radiated Emisssions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Case Material
Dual
www.recom-international.com
X, Y and Z
Level A
Level B
Level A
Perf. Criteria2
Perf. Criteria2
Perf. Criteria2
Perf. Criteria2
Perf. Criteria2
Non-conductive black plastic
Base material
MTBF ( Note 6 )
-40ºC to +100ºC
110°C
105°C
-55°C to +125°C
Humidity max., Non-condensing
Potting material
Weight
1600VDC min.
1000VDC min.
1000VDC min.
10 MΩ min.
10 GΩ min.
2500pF max.
1500pF max.
Aluminum base-plate
Dual
Single
Dual
Single
Dual
Silicon (UL94-V0)
55g
105g
3
2000 x 10 hours
3
1004 x 10 hours
July-2006
197
RP100-S_DI
Series
INNOLINE
DC/DC-Converter
Characteristics
Efficiency vs Output Load
100
90
80
Efficiency (%)
70
60
50
10
20
30
40
50
60
70
80 90 100
Output Power (%) Ta=25°C
48V Input Without Heatsink
110
90
1.) LFM590
2.) LFM400
3.) LFM200
Output Power (%)
70
50
4.) LFM20
30
10
-40
-20
0
20
40
60
1
80
2 34
100
Ambient Temperature (°C)
48V Input With Heatsink (7G-0022)
110
90
1.) LFM590
2.) LFM400
3.) LFM200
Output Power (%)
70
50
4.) LFM20
30
10
-40
-20
0
20
40
60
1
80
2 34
100
Ambient Temperature (°C)
198
July-2006
www.recom-international.com
INNOLINE
RP100-S_DI
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
Single Output
60.96
57.91
12.70
Side View
5.08
50.80
48.26
4xM3 x 0.5 ( Note 10)
Pin Connections
5
1
2
35.56
6
Bottom View
15.24
25.40
7
3
8
4
9
17.78
10.16
External Output Trimming
7
6
8
Trim Down
RD
RU
7
Pin Ø
1.016 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
Product Options Table
Output can be externally trimmed by using the method
shown below.
Trim Up
Pin #
Function
1
–Vin
2
Case
3
Remote ON/OFF
4
+Vin
5
–Vout
6
–Vsense
7
Trim
8
+Vsense
9
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
Option
Suffix
Negative remote ON/OFF logic, 0.20” pin length (standard)
Negative remote ON/OFF logic, 0.145” pin length
L
Negative remote ON/OFF logic, 0.11” pin length
K
Positive remote ON/OFF logic, 0.20” pin length
P
Positive remote ON/OFF logic, 0.145” pin length
S
Positive remote ON/OFF logic, 0.11” pin length
M
Example: RP100-483.3S/P
www.recom-international.com
July-2006
199
INNOLINE
RP100-S_DI
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
Dual Output
60.96
57.91
5.08
12.70
Side View
50.80
48.26
4xM3 x 0.5 ( Note 10)
Pin Connections
5
1
6
35.56
2
Bottom View
7
25.40
10.16
15.24
40.64
8
3
9
4
Product Options Table
Option
Output can be externally trimmed by using the method
shown below.
( ) for V2 output trim
9(6)
10(7)
8(5)
Suffix
Negative remote ON/OFF logic, 0.20” pin length (standard)
Trim Down
RD
RU
10(7)
Pin Ø
1.016 mm
1.016 mm
1.016 mm
1.016 mm
2.032 mm
2.032 mm
1.016 mm
2.032 mm
2.032 mm
1.016 mm
10
External Output Trimming
Trim Up
Pin #
Function
1
–Vin
2
Case
3
Remote ON/OFF
4
+Vin
5
+V2
6
–V2 (Com)
7
V2 Trim
8
+V1
9
+V1 (Com)
10
V1 Trim
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
Negative remote ON/OFF logic, 0.145” pin length
L
Negative remote ON/OFF logic, 0.11” pin length
K
Positive remote ON/OFF logic, 0.20” pin length
P
Positive remote ON/OFF logic, 0.145” pin length
S
Positive remote ON/OFF logic, 0.11” pin length
M
Example: RP100-483.305I/N
200
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
Single Outputs up to 30A
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
No Minimum Load
Under -Voltage Lockout
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 36.83 x 57.91 x 12.7mm Package
High Efficiency to 90%
INNOLINE
DC/DC-Converter
RP100-SB
Series
100 Watt
Single
Output
Selection Guide
Efficiency (5)
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
Load
Regulation
(mV)
RP100-481.8SB
36 – 75
1.8
30
5.4
85
RP100-482.5SB
36 – 75
2.5
30
7.5
87
RP100-483.3SB
36 – 75
3.3
25
10
89
RP100-4805SB
36 – 75
5.0
20
15
90
%
Add suffix “P” for positive logic ON/OFF control.
Description
The RP100-SB Series has been specifically designed for low voltage silicon applications. A wide input
voltage range, output voltage trim and sense inputs are all standard features. The converters also benefit from comprehensive over-current, over-voltage and over-temperature protection.
The RP100-SB is ideally suited to telecom, network and industrial applications.
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. Standard is negative remote ON/OFF, add suffix“P” for positive remote ON/OFF.
3. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
4. The RP100-SB meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
5. Typical value at nominal input voltage and full load.
6. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
www.recom-international.com
July-2006
201
INNOLINE
RP100-SB
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Under-Voltage Lockout
36-75VDC
Power Up
Power Down
Input Filter
Input Surge Voltage 100ms max
Start up time
Remote ON/OFF (Note 2)
(Positive logic)
(Negative logic)
L-C type
100VDC
Nominal Vin and constant resistive load
ON=Open or 3.5V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.5V < Vr < 15V,
Continuous Output Power
Output Voltage Accuracy
full load and nominal Vin
±1.5%
0%
Line Regulation
low line to high line at full load
Load Regulation
0% to 100% full load
Remote Sense (Note 1)
±0.2%
See table
10% of Vout
With 10µF tantalum and 1µF ceramic across Output
Temperature Coefficient
100mVp-p
±0.02%/ºC
25% load step change
Over Voltage Protection threshold (Hiccup)
200µs
120% of Vout
Over Current Protection threshold
110% ~ 140% of Iout Rated
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
+10%, -20%
Minimum Load
Transient Response Recovery Time
25ms typ.
100W max.
Output Voltage Adjustment (Note 1)
Ripple and Noise 20MHz bandwidth
(48V nom.)
34V typ.
32V typ.
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
up to 91%.
1600VDC min.
1000VDC min.
1000VDC min.
Isolation Resistance
10 MΩ min.
Isolation Capacitance
2500pF max.
Operating Frequency
270KHz typ.
Operating Temperature Range (Note 3)
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
X, Y and Z
Humidity
Non Condensing
95% max.
Conducted Emissions
EN55022 (Note 4)
Level A
EN55022 (Note 4)
Level B
EN55022 (Note 4)
Level A
Radiated Emisssions
Continued on next page
202
July-2006
www.recom-international.com
INNOLINE
RP100-SB
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
42g
3
MTBF Bellcore TR-NWT-000332, Tc=40°C, Io=80% max.
2500 x 10 hours
Characteristics
Efficiency Input Voltage
RP100-4805SB
Efficiency Output Current Iout
RP100-4805SB
95
95
94
90
93
92
85
80
90
89
88
87
70
48Vin
65
60
50
36
40
44
48
52
56 60
64
68
2
72 75
4
6
8
10
12
14
16
18
20
Output Current, Iout (A)
Output Current, Iout (A)
Input With Heatsink (7G-0022)
RP100-4805SB
Input Without Heatsink
RP100-4805SB
1=200LFM, 2=300LFM, 3=400LFM, 4=500LFM
1=200LFM, 2=300LFM, 3=400LFM, 4=500LFM
120
120
1
100
2 3 4
1
100
80
2 34
80
Forced Convection
40
20
Output Power (%)
Output Power (%)
36Vin
55
86
85
60
75Vin
75
Efficiency (%)
Efficiency (%)
91
0
Forced Convection
40
20
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature Range (°C)
www.recom-international.com
60
Ambient Temperature Range (°C)
July-2006
203
INNOLINE
RP100-SB
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
36.83
57.90
Side View
12.70
5.08
50.8
3.55
3.55
1.57
4xM3 x 0.5 ( Note 6)
Pin Connections
Pin #
4
5
6
7
8
1
26.16
15.24
2
Bottom View
3
1.016
7.62
15.24
1
2
3
4
5
6
7
8
Function
–Vin
Remote ON/OFF
+Vin
–Vout
–Vsense
Trim
+Vsense
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
5.33
5.33
47.24
External Output Trimming
Output can be externally trimmed by using the method
shown below.
Trim Resistor Calculation:
7
Trim Up
6
RD
RU
8
204
Rup (kΩ) = 5.1Vout (100+∆%) - 510 -10.2
1.225∆%
∆%
Trim Down
Rdn (kΩ) = 510 -10.2
∆%
7
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
●
Single Outputs up to 35A
Input/Output 1.6kVDC Isolation
Adjustable Output Voltage
No Minimum Load
Under -Voltage Lockout
Industry Standard Footprint
Fixed Operating Frequency
Halt Tested
Compact 36.83 x 57.91 x 12.7mm Package
High Efficiency to 90%
INNOLINE
DC/DC-Converter
RP125-SB
Series
125 Watt
Single
Output
Selection Guide
Efficiency (5)
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
Load
Regulation
(mV)
RP125-481.8SB
36 – 75
1.8
35
5.4
84
RP125-482.5SB
36 – 75
2.5
35
7.5
86
RP125-483.3SB
36 – 75
3.3
30
10
88
RP125-4805SB
36 – 75
5.0
25
15
90
%
Add suffix “P” for positive logic ON/OFF control.
Description
The RP125-SB Series has been specifically designed for low voltage silicon applications. A wide input
voltage range, output voltage trim and sense inputs are all standard features. The converters also benefit from comprehensive over-current, over-voltage and over-temperature protection.
The RP125-SB is ideally suited to telecom, network and industrial applications.
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. Standard is negative remote ON/OFF, add suffix“P” for positive remote ON/OFF.
3. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
4. The RP125-SB meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
5. Typical value at nominal input voltage and full load.
6. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
www.recom-international.com
July-2006
205
INNOLINE
RP125-SB
Series
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Under-Voltage Lockout
36-75VDC
Power Up
Power Down
Input Filter
Input Surge Voltage 100ms max
Start up time
Remote ON/OFF (Note 2)
(Positive logic)
(Negative logic)
L-C type
100VDC
Nominal Vin and constant resistive load
ON=Open or 3.5V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.5V < Vr < 15V,
Continuous Output Power
Output Voltage Accuracy
full load and nominal Vin
±1.5%
0%
Line Regulation
low line to high line at full load
Load Regulation
0% to 100% full load
Remote Sense (Note 1)
±0.2%
See table
10% of Vout
With 10µF tantalum and 1µF ceramic across Output
Temperature Coefficient
100mVp-p
±0.02%/ºC
25% load step change
Over Voltage Protection threshold (Hiccup)
200µs
120% of Vout
Over Current Protection threshold
110% ~ 140% of Iout Rated
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
+10%, -20%
Minimum Load
Transient Response Recovery Time
25ms typ.
125W max.
Output Voltage Adjustment (Note 1)
Ripple and Noise 20MHz bandwidth
(48V nom.)
34V typ.
32V typ.
Hiccup, Automatic recovery
Input to Output
Input to Case
Output to Case
up to 90%.
1600VDC min.
1000VDC min.
1000VDC min.
Isolation Resistance
10 MΩ min.
Isolation Capacitance
2500pF max.
Operating Frequency
270KHz typ.
Operating Temperature Range (Note 3)
-40ºC to +100ºC (base plate)
Over Temperature Protection
110°C
Storage Temperature Range
-55°C to +125°C
Humidity max., Non-condensing
95%
Thermal Shock
MIL-STD-810D
Vibration
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
X, Y and Z
Humidity
Non Condensing
95% max.
Conducted Emissions
EN55022 (Note 4)
Level A
EN55022 (Note 4)
Level B
EN55022 (Note 4)
Level A
Radiated Emisssions
Continued on next page
206
July-2006
www.recom-international.com
RP125-SB
Series
INNOLINE
DC/DC-Converter
Specifications (refer to the standard application circuit, Ta: 25°C)
ESD
EN61000-4-2
Perf. Criteria2
Radiated Immunity
EN61000-4-3
Perf. Criteria2
Fast Transient
EN61000-4-4
Perf. Criteria2
Surge
EN61000-4-5
Perf. Criteria2
Conducted Immunity
EN61000-4-6
Perf. Criteria2
Case Material
Open with Aluminium base plate
Weight
42g
3
MTBF Bellcore TR-NWT-000332, Tc=40°C, Io=80% max.
2500 x 10 hours
Characteristics
Efficiency Input Voltage
RP125-4805SB
Efficiency Output Current Iout
RP125-4805SB
95
95
94
90
93
92
85
80
75
90
89
Efficiency (%)
Efficiency (%)
91
88
87
70
36Vin
50
36
40
44
48
52
56 60
64
68
2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0
72 75
Output Current, Iout (A)
Output Current, Iout (A)
Input With Heatsink (7G-0022)
RP125-4805SB
Input Without Heatsink
RP125-4805SB
1=200LFM, 2=300LFM, 3=400LFM, 4=500LFM
1=200LFM, 2=300LFM, 3=400LFM, 4=500LFM
120
120
1
100
2
3 4
100
80
1
2
3 4
80
Forced Convection
40
20
Output Power (%)
Output Power (%)
48Vin
60
55
86
85
60
75Vin
65
0
Forced Convection
40
20
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature Range (°C)
www.recom-international.com
60
Ambient Temperature Range (°C)
July-2006
207
INNOLINE
RP125-SB
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
36.83
57.90
Side View
12.70
5.08
50.8
3.55
3.55
1.57
4xM3 x 0.5 ( Note 6)
Pin Connections
Pin #
4
5
6
7
8
1
26.16
15.24
2
Bottom View
3
1.016
7.62
15.24
1
2
3
4
5
6
7
8
Function
–Vin
Remote ON/OFF
+Vin
–Vout
–Vsense
Trim
+Vsense
+Vout
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin pitch tolerance 0.35mm
5.33
5.33
47.24
External Output Trimming
Output can be externally trimmed by using the method
shown below.
Trim Resistor Calculation:
7
Trim Up
6
208
Trim Down
RD
RU
8
Rup (kΩ) = 5.1Vout (100+∆%) - 510 -10.2
1.225∆%
∆%
Rdn (kΩ) = 510 -10.2
∆%
7
July-2006
www.recom-international.com
Features
●
●
●
●
●
INNOLINE
For Telecom DSM, XDSL Applications
Internal Pi Filter
Multiple Outputs
Overcurrent Protection
High Efficiency to 86%
DC/DC-Converter
Selection Guide
Part Number
Input
Range
(VDC)
Output
Voltage
(VDC)
RP3.75D2/x1
28-60
5
750
78
D2
RP7.5D2/x1
40-140
5
1500
78
D2
RP7E1/x1
36-180
+5
±15
1000
±65
77
E1
+5.1
±12
1000
+100
-200
77
E1
+5
±12
-48
1500
+200
-50
76
E1
±5
+340
-35
-100
(1W)
77
E1
76
E1
Dimension
RP8.7E1/x1
RP14.7E1/x1
RP6.4E1/x1
36-170
20-60
95-190
Output
Current
(mA)
-35
70
RP10E1/x1
90-270
±5
Efficiency
(%)
+560
-60
-155
-50
(1W)
-28
-32
70
Dimension
High
Voltage
Input
Series
High
Voltage
Output
Series
Selection Guide
Part Number
Input
Range
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RP3.6A2/x1
36-72
120
30
72
A2
RP6D2/x1
36-72
120
50
78
D2
RP9.2D2/x1
36-72
92
100
81
D2
RP15.4F2/x2
20-72
110
140
84
F2
RP15.4F2/x1
20-72
140
110
86
F2
RP11.4E1/x1
36-72
190
60
80
E1
RP16.2E1/x1
36-72
267
60
81
E1
(%)
Note:
For Package Style please see High Output Series. For detailed datasheets and
pinning please check with our technical customer service.
www.recom-international.com
July-2006
209
POWERLINE - CONTENTS
Single Output Models
Series (**)
Isolation
Power
Input Voltages
Output Voltages
Case
Page
(kV)
(Watts)
(VDC)
(VDC)
Dimensions mm
No.
RP08 (A)
1.6
8
9-18, 18-36, 36-75
3.3, 5, 12, 15
DIP24 (SMD)
212
RP08 (AW)
1.6
8
9-36, 18-75
3.3, 5, 12, 15
DIP24 (SMD)
216
RP10 (E)
1.6
10
9-18, 18-36, 36-75
3.3, 5, 12, 15
50.8 x 25.4 x 10.2
219
RP10 (EW)
1.6
10
9-36, 18-75
5, 12, 15
50.8 x 25.4 x 10.2
224
RP12 (A)
1.6
12
9-18, 18-36, 36-75
2.5, 3.3, 5, 12, 15
DIP24
229
RP12 (AW)
1.6
12
9-36, 18-75
3.3, 5, 12, 15
DIP24
233
RP15 (EW)
1.6
15
9-36, 18-75
5, 12, 15
50.8 x 40.6 x 10.2
236
RP15 (F)
1.6
15
9-18, 18-36, 36-75
3.3, 5, 12, 15
50.8 x 25.4 x 10.2
240
RP15 (FW)
1.6
15
9-36, 18-75
3.3, 5, 12, 15
50.8 x 25.4 x 10.2
244
RP20 (E)
1.6
20
9-18, 18-36, 36-75
3.3, 5, 12, 15
50.8 x 40.6 x 10.2
247
RP20 (EW)
1.6
20
9-36, 18-75
3.3, 5, 12, 15
50.8 x 40.6 x 10.2
251
RP20 (F)
1.6
20
9-18, 18-36, 36-75
1.5, 1.8, 2.5, 3.3, 5, 12, 15
50.8 x 25.4 x 10.2
255
RP20 (FW)
1.6
20
9-36, 18-75
3.3, 5, 12, 15
50.8 x 25.4 x 10.2
259
RP30 (E)
1.6
30
9-18, 18-36, 36-75
1.5, 1.8, 2.5, 3.3, 5, 12, 15
50.8 x 40.6 x 10.2
262
RP30 (EW)
1.6
30
10-40, 18-75
1.5, 1.8, 2.5, 3.3, 5, 12, 15
50.8 x 40.6 x 10.2
266
RP40 (E)
1.6
40
9-18, 18-36, 36-75
3.3, 5, 12, 15
76.2 x 66.0 x 10.2
270
RP40 (G)
1.6
40
9-18, 18-36, 36-75
1.5, 1.8, 2.5, 3.3, 5, 12, 15
50.8 x 50.8 x 10.2
275
RP40 (GW)
1.6
40
9-36, 18-75
3.3, 5, 12, 15
51.3 x 51.3 x 10.2
280
Products in bold type are new products for 2006
See next page for Dual and Triple Output Models
RP1P5, RP03, RP05 and RP60 are not recommended for new designs as they are discontinued. Existing projects
will still be continued to be supplied. Please see website www.recom-international.com for detailed information.
210
July-2006
www.recom-international.com
POWERLINE - CONTENTS
Dual Outputs Models
Series (**)
Isolation
(kV)
Power
(Watts)
Input Voltages
(VDC)
Output Voltages
(VDC)
Case
Dimensions mm
RP08 (A)
1.6
8
9-18, 18-36, 36-75
±5, ±12, ±15
DIP24 (SMD)
212
RP08 (AW)
1.6
8
9-36, 18-75
±5, ±12, ±15
DIP24 (SMD)
216
RP10 (E)
1.6
10
9-18, 18-36, 36-75
±5, ±12, ±15
50.8 x 25.4 x 10.2
219
RP10 (EW)
1.6
10
9-36, 18-75
±5, ±12, ±15
50.8 x 25.4 x 10.2
224
RP12 (A)
1.6
12
9-18, 18-36, 36-75
±5, ±12, ±15
DIP24 (SMD)
229
RP12 (AW)
1.6
12
9-36, 18-75
±5, ±12, ±15
DIP24 (SMD)
233
RP15 (EW)
1.6
15
9-36, 18-75
±5, ±12, ±15
50.8 x 40.6 x 10.2
236
RP15 (F)
1.6
15
9-18, 18-36, 36-75
±5, ±12, ±15
50.8 x 25.4 x 10.2
240
RP15 (FW)
1.6
15
9-36, 18-75
±5, ±12, ±15
50.8 x 25.4 x 10.2
244
RP20 (E)
1.6
20
9-18, 18-36, 36-75
±5, ±12, ±15
50.8 x 40.6 x 10.2
247
RP20 (EW)
1.6
20
9-36, 18-75
±5, ±12, ±15
50.8 x 40.6 x 10.2
251
RP20 (F)
1.6
20
9-18, 18-36, 36-75
±12, ±15
50.8 x 25.4 x 10.2
255
RP20 (FW)
1.6
20
9-36, 18-75
±5, ±12, ±15
50.8 x 25.4 x 10.2
259
RP30 (E)
1.6
30
9-18, 18-36, 36-75
±12, ±15
50.8 x 40.6 x 10.2
262
RP30 (EW)
1.6
30
10-40, 18-75
±12, ±15
50.8 x 40.6 x 10.2
266
RP40 (E)
1.6
40
9-18, 18-36, 36-75
±5, ±12, ±15
76.2 x 66.0 x 10.2
270
RP40 (E)Dual Out.1.6
40
9-18, 18-36, 36-75
3.3/5
76.2 x 66.0 x 10.2 D(isol.)
270
RP40 (G)
1.6
40
9-18, 18-36, 36-75
±12, ±15
50.8 x 50.8 x 10.2
275
RP40 (G)Dual Out.1.6
40
9-18, 18-36, 36-75
3.3/5
50.8 x 50.8 x 10.2 D(isol.)
275
RP40 (GW)
40
9-36, 18-75
±12, ±15
51.3 x 51.3 x 10.2
280
1.6
Page
No.
Triple Output Models
RP20 (TE)
1.6
20
9-18, 18-36, 36-75
3.3/±12, 3.3/±15, 5/±12, 5/±15
50.8 x 40.6 x 10.2
247
RP40 (TE)
1.6
40
9-18, 18-36, 36-75
5/±12, 5/±15
76.2 x 66.0 x 10.2
270
RP40 (TG)
1.6
40
9-18, 18-36, 36-75
3.3/±12, 3.3/±15, 5/±12, 5/±15
50.8 x 50.8 x 10.2
276
Products in bold type are new products for 2006
RP1P5, RP03, RP05 and RP60 are not recommended for new designs as they are discontinued. Existing projects
will still be continued to be supplied. Please see website www.recom-international.com for detailed information.
www.recom-international.com
July-2006
211
Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
●
POWERLINE
2:1 Wide Input Voltage Range
8 Watts Regulated Output Power
1.6kVDC Isolation
ULCertified
Low Profile, 10.2 mm Height
Over Current Protection
Five-Sided Shield
No Derating to 71°C
Standard DIP24 and SMD-Pinning
Efficiency to 85%
DC/DC-Converter
RP08S_DA
Series
Selection Guide 5V, 12V, 24V and 48V Input Types
DIP24 (SMD)
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
RP08-123.3SA**
9-18
3.3
2000
724
80
3300
RP08-1205SA**
9-18
5
1500
801
82
1600
RP08-1212SA**
9-18
12
666
833
84
350
Part Number
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP08-1215SA**
9-18
15
533
843
83
240
RP08-243.3SA**
18-36
3.3
2000
362
80
3300
RP08-2405SA**
18-36
5
1500
396
83
1600
RP08-2412SA**
18-36
12
666
416
84
350
RP08-2415SA**
18-36
15
533
416
84
240
RP08-483.3SA**
36-75
3.3
2000
181
80
3300
RP08-4805SA**
36-75
5
1500
198
83
1600
RP08-4812SA**
36-75
12
666
208
84
350
RP08-4815SA**
36-75
15
533
208
84
240
RP08-1205DA**
9-18
±5
±800
843
83
±1000
RP08-1212DA**
9-18
±12
±333
833
84
±160
RP08-1215DA**
9-18
±15
±267
834
84
±100
RP08-2405DA**
18-36
±5
±800
427
82
±1000
RP08-2412DA**
18-36
±12
±333
422
83
±160
RP08-2415DA**
18-36
±15
±267
411
85
±100
RP08-4805DA**
36-75
±5
±800
211
83
±1000
RP08-4812DA**
36-75
±12
±333
206
85
±160
RP08-4815DA**
36-75
±15
±267
206
85
±100
8 Watt
DIP24 & SMD,
Single & Dual
Output
UL-60950-1 Certified
** add Suffix SMD for SMD package
Description
The A-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards.
212
14-February-2007
www.recom-international.com
POWERLINE
RP08-S_DA
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP08-4805SA
125
100
Output Power (%)
75
50
Natural Convection
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C) 65
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range (see Note 3)
12V nominal input
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
Pi Type
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load)
Remote OFF input current
600ms typ.
DC-DC ON
DC-DC OFF
Nominal input
Output Power
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
8W max.
Output Voltage Accuracy (full Load and nominal Vin)
±2%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
36VDC
50VDC
100VDC
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
9-18VDC
18-36VDC
36-75VDC
±0.2%
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
±0.5%
±1%
±5%
Ripple and Noise (20MHz bandwith)
50mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
200µs
continued on next page
www.recom-international.com
14-February-2007
213
RP08-S_DA
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Over Load Protection (% of full load at nominal Vin)
150% typ
Short Circuit Protection
Continuous, automatic recovery
Efficiency
Isolation Voltage
see „Selection Guide“ table
In to out
I/O to case
I/O to case
1600VDC min.
DIP type 1600VDC min.
SMD type 1000VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
100kHz min.
Approved to Safety Standards
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
Natural convection
20°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Epoxy (UL94-V0)
Conducted Emissions (see Note 8)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Weight
DIP
SMD
16g
18g
Dimensions
DIP
SMD
31.8 x 20.3 x 10.2mm
32.0 x 20.3 x 10.9mm
3165 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP08 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Start up voltage : 10VDC
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input.
8. See application notes for EMI-filtering.
214
14-February-2007
www.recom-international.com
RP08-S_DA
Series
POWERLINE
DC/DC-Converter
Package Style and Pinning (mm)
DIP24 Package Style
3rd angle
projection
31.80
20.30
10.20
3.8
2
5.10
20.30
2.54
15.20
Pin Connections
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
NC = No Connection
0.25 x 0.50
Rectangular Pin
9
11
16
14
1 2 3
Bottom View
23 22
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
Pin Pitch Tolerance ±0.35 mm
SMD Package Style
32.00
20.30
31.40
SMD Package Style
11.20
2.54
Same spec. as the original DIP spec. and pin
definition, excl. of the SMD type pin.
10.90
3.81
21.30
6.35
25.40
Pin area
0.1 x 0.50
2.54
0.50
Pin Connections
1.60
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
Top View
24.14
24 23 22 21 20
16 15 14 13
11 x 2.54
www.recom-international.com
1
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
Others
NC
NC = No Connection
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
NC
Pin Pitch Tolerance ±0.35 mm
27.94
14-February-2007
215
Features
Regulated
Converters
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
8 Watts Regulated Output Power
1.6kVDC Isolation
Over Current and Over Voltage Protection
Five-Sided Shield
No Derating to 74°C
Standard DIP24 and SMD-Pinning
Efficiency to 88%
Selection Guide 24V and 48V Wide Input Types
Part Number
Input
Range
Output
Voltage
Output
Current
Input (4,5)
Current
Efficiency(6) Capacitive(7)
Load max.
DIP24 (SMD)
VDC
VDC
mA
mA
%
µF
RP08-243.3SAW**
9-36
3.3
2400
40/407
85
1330
RP08-2405SAW**
9-36
5
1600
40/402
87
1330
RP08-2412SAW**
9-36
12
666
25/407
86
288
RP08-2415SAW**
9-36
15
533
25/407
86
200
RP08-483.3SAW**
18-75
3.3
2400
20/204
85
1330
RP08-4805SAW**
18-75
5
1600
20/201
87
1330
RP08-4812SAW**
18-75
12
666
13/201
87
288
RP08-4815SAW**
18-75
15
533
13/198
88
200
RP08-2405DAW**
9-36
±5
±800
20/417
84
±900
RP08-2412DAW**
9-36
±12
±333
25/407
84
±133
RP08-2415DAW**
9-36
±15
±267
25/407
86
±90
RP08-4805DAW**
18-75
±5
±800
10/208
84
±900
RP08-4812DAW**
18-75
±12
±333
13/203
85
±133
RP08-4815DAW**
18-75
±15
±267
13/201
87
±90
POWERLINE
DC/DC-Converter
RP08S_DAW
Series
8 Watt
DIP24 & SMD,
Single & Dual
Output
UL-60950-1 Pending
** add Suffix SMD for SMD package
Derating Graph (Ambient Temperature)
RP08-4805SAW
125
100
Output Power (%)
75
50
75Vin
Natural Convection
Nom Vin
Derating graphs are valid
only for the shown part numbers. If you need detailed
derating-information about a
part-number not shown here
please contact our technical
customer service at
[email protected]
25
0
-40 -25 -10 0
50 60 70 80 90 100 110
78
Ambient Temperature Range (°C)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Input Filter
Input Surge Voltage (100 ms max.)
24V nominal input
48V nominal input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load)
9-36VDC
18-75VDC
Pi Type
50VDC
100VDC
20mAp-p
continued on next page
216
14-February-2007
www.recom-international.com
POWERLINE
RP08-S_DAW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see note 1)
450ms typ.
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
DC-DC ON
DC-DC OFF
Nominal input
Remote OFF input current
Output Power
8W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Minimum Load
0%
Line Regulation (low line, high line at full load)
Load Regulation (0% to 100% full load)
±0.2%
±0.5%
±1%
Single
Dual
Cross Regulation Dual Output (asymmetrical load 25%/100% full load)
±5%
Ripple and Noise (20MHz bandwith)
50mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Input Voltage Variation, dv/dt
250µs
complies with ETS300 132, part 4.4
Over Load Protection (% of full load at nominal Vin)
Overvoltage Protection (Single)
Undervoltage Protection
150% typ
24V Input
48V Input
Short Circuit Protection
Zener Diode Clamp
DC-DC ON = 9VDC, DC-DC OFF = 8VDC
DC-DC ON = 18VDC, DC-DC OFF = 16VDC
Continuous, automatic recovery
Efficiency
Isolation Voltage
5V/ms
see „Selection Guide“ table
In to Out and I/O to case
1600VDC min.
Isolation Resistance
10 GΩ min.
Isolation Capacitance
1500pF max.
Operating Frequency
Operating Temperature Range
5, 12, 15, ±12, ±15V
3.3, ±5V
with derating
300kHz typ.
-40°C to +78°C
-40°C to +74°C
-40°C to +105°C
Maximum Case Temperature
+105°C
Storage Temperature Range
-55°C to +125°C
Thermal Impedance
Natural convection
12°C/Watt
Case Material
Nickel-Coated copper
Base Material
Non-conductive black plastic
Potting Material
Weight
Conducted Emissions (see note 3)
Radiated Emissions (see note 3)
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
DIP
SMD
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
MTBF (see note 2)
www.recom-international.com
18g
20g
Class A
Class A
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
5% to 95% RH
Bellcore-TR-NWT-000332
14-February-2007
2350 x 103 hours
217
RP08-S_DAW
Series
POWERLINE
DC/DC-Converter
Notes :
1.
2.
3.
4.
5.
6.
7.
The ON/OFF control pin voltage is referenced to negative input.
BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
Requires external filter to meet EN55022 Class A
Typical value at nominal input voltage and no load.
Maximum value at nominal input voltage and full load
Typical value at nominal input voltage and full load.
Test by minimum Vin and constant resistor load.
Package Style and Pinning (mm)
DIP24 Package Style
31.80
20.30
3rd angle
projection
10.20
3.8
2
5.10
20.30
15.20
Pin Connections
2.54
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
NC = No Connection
0.25 x 0.50
Rectangular Pin
1 2 3
9
11
16
14
Bottom View
23 22
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
Pin Pitch Tolerance ±0.35 mm
SMD Package Style
32.00
20.30
SMD Package Style
31.40
Same spec. as the original DIP spec. and pin
definition, excl. of the SMD type pin.
11.20
2.54
10.90
3.81
21.30
6.35
Pin Connections
25.40
Pin area
0.1 x 0.50
2.54
0.50
1.60
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
Top View
24.14
24 23 22 21 20
11 x 2.54
218
16 15 14 13
1
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
Others
NC
NC = No Connection
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
NC
Pin Pitch Tolerance ±0.35 mm
27.94
14-February-2007
www.recom-international.com
Features
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
10 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x25.4x10.2mm Package
Efficiency to 86%
Selection Guide 12V, 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
RP10-123.3SE
9-18
3.3
2000
724
RP10-1205SE
9-18
5
2000
RP10-1212SE
9-18
12
830
RP10-1215SE
9-18
15
670
RP10-243.3SE
18-36
3.3
RP10-2405SE
18-36
RP10-2412SE
18-36
RP10-2415SE
18-36
RP10-483.3SE
36-75
RP10-4805SE
RP10-4812SE
Efficiency(5) Capacitive(6)
Load max.
%
µF
80
6800
1082
81
4700
1064
82
690
1088
81
470
2000
362
80
6800
5
2000
534
82
4700
12
830
519
84
690
15
670
523
84
470
3.3
2000
183
79
6800
36-75
5
2000
260
84
4700
36-75
12
830
253
86
690
RP10-4815SE
36-75
15
670
258
85
470
RP10-1205DE
9-18
±5
±1000
1068
82
±680
RP10-1212DE
9-18
±12
±416
1053
83
±330
RP10-1215DE
9-18
±15
±333
1041
84
±110
RP10-2405DE
18-36
±5
±1000
548
80
±680
RP10-2412DE
18-36
±12
±416
520
84
±330
RP10-2415DE
18-36
±15
±333
520
84
±110
RP10-4805DE
36-75
±5
±1000
267
82
±680
RP10-4812DE
36-75
±12
±416
254
86
±330
RP10-4815DE
36-75
±15
±333
260
84
±110
POWERLINE
DC/DC-Converter
RP10S_DE
Series
10 Watt
2” x 1” Package
Single & Dual
Output
UL-60950-1 Certified
* add suffix /M2 for higher efficiencies and extended temperature range.
* add /P for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards (9).
www.recom-international.com
July-2006
219
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
125
RP10-2405SE
100
100
75
75
Natural Convection
50
Output Power (%)
Output Power (%)
RP10-2405SE With Heat Sink
125
25
0
-25
-10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
79
Natural Convection
50
25
0
-25
125
100
100
Output Power (%)
Output Power (%)
75
Natural Convection
50
25
0
-25
-10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
79
25
0
-25
100
75
75
Natural Convection
Output Power (%)
Output Power (%)
100
25
50 60 70
Ambient Temperature Range (°C)
80 90 100
50
0
-40 -25 -10 0
100
100
Output Power (%)
Output Power (%)
75
Natural Convection
25
50 60 70
Ambient Temperature Range (°C)
80 90 100
85
RP10-2405SE_DE/M1 With Heat Sink
125
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
RP10-4805SE/M1
50
Natural Convection
25
125
75
50 60 70 80 90 100
83
RP10-2405SE_DE/M1
125
-10 0
-10 0
Ambient Temperature Range (°C)
RP10-4805SE
0
-25
Natural Convection
50
125
50
50 60 70 80 90 100
81
RP10-2405DE With Heat Sink
RP10-2405DE
125
75
-10 0
Ambient Temperature Range (°C)
80 90 100
85
50
Natural Convection
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
88
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
220
July-2006
www.recom-international.com
RP10-S_DE
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
9-18VDC
18-36VDC
36-75VDC
Pi Type
12V Input
24V Input
48V Input
36VDC
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
30mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Remote OFF input current
Nominal input
Output Power
±2%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
±1%
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
±1%
±2%
±5%
Single
50mVp-p
Dual
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp
20mA
10W max.
Output Voltage Accuracy (full Load and nominal Vin)
Load Regulation (25% to 100% full load)
Open or 3.5V < Vr < 12V
500µs
3.3V output
5V output
12V output
15V output
Over Load Protection (% of full load at nominal Vin)
3.9V
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards (see Note 9)
UL 1950, EN60950
Operating Temperature Range
Standard
-25°C to +85°C(with derating)
(Reference Derating Curve) (see Note 10)
M1
-40°C to +85°C(non derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
continued on next page
www.recom-international.com
July-2006
221
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Thermal Impedance
Natural convection
12°C/Watt
(see Note 8)
Natural convection with Heat Sink
10°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 11)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Weight
27g
Dimensions
50.8 x 25.4 x 10.2mm
1976 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.
Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.
2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SE/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SE/N).
If no suffix is specified, the control pin will be omitted.
8. Heat sink is optional and P/N: 7G-0020A.
9. The M1 version (RP10-xxxxSE/M1, RP10-xxxxDE/M1) does not carry the UL certification.
10.M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.
11. See application notes for EMI-filtering.
222
July-2006
www.recom-international.com
RP10-S_DE
Series
POWERLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
Pin Connections
3
1
2
6
Bottom View
10.20
4
10.20
5
12.70
Pin #
Single
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
6*
CTRL*
*Optional. See Note 7.
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL*
Pin Pitch Tolerance ±0.35 mm
www.recom-international.com
July-2006
223
Features
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
10 Watts Output Power
1.6kVDC Isolation
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x25.4x10.2mm Package
Efficiency to 84%
POWERLINE
DC/DC-Converter
RP10S_DEW
Series
10 Watt
2” x 1” Package
Single & Dual
Output
Selection Guide 24V and 48V Input Types
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
9-36
5
2000
548
80
4700
9-36
12
830
532
82
690
RP10-2415SEW
9-36
15
670
551
80
470
RP10-4805SEW
18-75
5
2000
274
80
4700
RP10-4812SEW
18-75
12
830
259
84
690
RP10-4815SEW
18-75
15
670
262
84
470
RP10-2405DEW
9-36
±5
±1000
548
80
±680
RP10-2412DEW
9-36
±12
±416
547
80
±330
RP10-2415DEW
9-36
±15
±333
548
80
±110
RP10-4805DEW
18-75
±5
±1000
271
81
±680
RP10-4812DEW
18-75
±12
±416
281
78
±330
RP10-4815DEW
18-75
±15
±333
270
81
±110
Part Number
Input
Range
VDC
RP10-2405SEW
RP10-2412SEW
Efficiency(5) Capacitive(6)
Load max.
%
µF
* add suffix /M2 for higher efficiencies and extended temperature range.
* add /P for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
224
July-2006
www.recom-international.com
POWERLINE
RP10-S_DEW
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP10-2405SEW With Heat Sink
RP10-2405SEW
125
125
100
100
75
Natural Convection
Output Power (%)
Output Power (%)
75
50
25
0
-25
-10 0
50 60 70 80 90 100
Ambient Temperature Range (°C)
25
0
-25
50 60 70 80 90 100
Ambient Temperature Range (°C) 75
100
100
75
75
Output Power (%)
Output Power (%)
125
Natural Convection
25
0
-25
50 60 70 80 90 100
Ambient Temperature Range (°C) 74
-10 0
50
0
-25
100
75
75
Natural Convection
Output Power (%)
Output Power (%)
100
25
80 90 100
50
50 60 70 80 90 100
Ambient Temperature Range (°C) 75
RP10-2405DEW/M2 With Heat Sink
125
100
100
75
Natural Convection
Output Power (%)
Output Power (%)
Natural Convection
0
-40 -25 -10 0
RP10-2405DEW/M2
50
80 90 100
78
25
125
75
50 60 70
RP10-2405SEW/M2 With Heat Sink
125
50 60 70
Ambient Temperature Range (°C)
-10 0
Ambient Temperature Range (°C)
RP10-2405SEW/M2
0
-40 -25 -10 0
Natural Convection
25
125
50
-10 0
RP10-2405DEW With Heat Sink
RP10-2405DEW
125
50
Natural Convection
50
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C) 74
50
Natural Convection
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
78
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
www.recom-international.com
July-2006
225
POWERLINE
RP10-S_DEW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
9-36VDC
18-75VDC
Pi Type
24V Input
48V Input
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load)
30mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
(Negative logic)
Remote OFF input current
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Nominal input
Output Power
10W max.
Output Voltage Accuracy (full Load and nominal Vin)
±2%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
±1%
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
±1%
±2%
±5%
Single
50mVp-p
Dual
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp
20mA
500µs
5V output
12V output
15V output
Over Load Protection (% of full load at nominal Vin)
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Operating Temperature Range
Standard
-25°C to +85°C(with derating)
(Reference Derating Curve) (see Note 9)
M2
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
Natural convection
12°C/Watt
(see Note 8)
Natural convection with Heat Sink
10°C/Watt
Thermal Shock
MIL-STD-810D
continued on next page
226
July-2006
www.recom-international.com
POWERLINE
RP10-S_DEW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
27g
Dimensions
50.8 x 25.4 x 10.2mm
1976 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.
Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.
2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SEW/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SEW/N).
If no suffix is specified, the control pin will be omitted.
8. Heat sink is optional and P/N: 7G-0020A.
9. M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.
10. See application notes for EMI-filtering.
www.recom-international.com
July-2006
227
POWERLINE
RP10-S_DEW
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
Pin Connections
3
1
2
6
Bottom View
10.20
4
10.20
5
12.70
Pin #
Single
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
6*
CTRL*
* Optional. See Note 7
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL*
Pin Pitch Tolerance ±0.35 mm
228
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
POWERLINE
2:1 Wide Input Voltage Range
12 Watts Output Power
1.6kVDC Isolation
UL Certified
Over Current Protection
Five-Sided Shield
Standard DIP24 and SMD-Pinning
Efficiency to 88%
DC/DC-Converter
RP12S_DA
Series
Selection Guide 5V, 12V, 24V and 48V Input Types
DIP24 (SMD)
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
RP12-122.5SA**
9-18
2.5
3500
1687
82
2000
RP12-123.3SA**
9-18
3.3
3500
1646
84
2000
RP12-1205SA**
9-18
5
2400
1606
86
2000
RP12-1212SA**
9-18
12
1000
1606
86
430
RP12-1215SA**
9-18
15
800
1606
86
300
RP12-242.5SA**
18-36
2.5
3500
843
83
2000
RP12-243.3SA**
18-36
3.3
3500
823
85
2000
RP12-2405SA**
18-36
5
2400
803
87
2000
RP12-2412SA**
18-36
12
1000
803
87
430
RP12-2415SA**
18-36
15
800
803
87
300
RP12-482.5SA**
36-75
2.5
3500
422
83
2000
RP12-483.3SA**
36-75
3.3
3500
411
85
2000
RP12-4805SA**
36-75
5
2400
401
87
2000
RP12-4812SA**
36-75
12
1000
401
87
430
RP12-4815SA**
36-75
15
800
401
87
300
RP12-1205DA**
9-18
±5
±1200
1687
82
±1250
RP12-1212DA**
9-18
±12
±500
1626
87
±200
RP12-1215DA**
9-18
±15
±400
1626
87
±120
RP12-2405DA**
18-36
±5
±1200
843
83
±1250
RP12-2412DA**
18-36
±12
±500
813
88
±200
RP12-2415DA**
18-36
±15
±400
813
88
±120
RP12-4805DA**
36-75
±5
±1200
422
83
±1250
RP12-4812DA**
36-75
±12
±500
406
88
±200
RP12-4815DA**
36-75
±15
±400
406
88
±120
Part Number
Efficiency(5) Capacitive(6)
Load max.
%
µF
12 Watt
DIP24 & SMD,
Single & Dual
Output
UL-60950-1 Certified
** add Suffix SMD for SMD package
www.recom-international.com
14-February-2007
229
POWERLINE
RP12-S_DA
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP12-4805SA
125
100
Output Power (%)
75
50
Natural Convection
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C) 63
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
Under Voltage Lockout
12V Input DC-DC ON
DC-DC OFF
24V Input DC-DC ON
DC-DC OFF
48V Input DC-DC ON
DC-DC OFF
9-18VDC
18-36VDC
36-75VDC
9VDC
8VDC
18VDC
16VDC
36VDC
33VDC
Input Filter
Pi Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Remote OFF input curren
36VDC
50VDC
100VDC
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
5V/ms max.
600ms typ.
DC-DC ON
DC-DC OFF
Nominal input
Output Power
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
12W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1.2%
Minimum Load (see Note 1)
10% of full load
continued on next page
230
14-February-2007
www.recom-international.com
RP12-S_DA
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Single
±0.2%
Dual
±0.5%
Single
Dual
(only 2.5Vout)
±0.5%
±1%
±1.5%
Cross Regulation (asymmetrical load 25%/100% full load)
±5%
Ripple and Noise (20MHz bandwith)
85mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
300µs
2.5V
3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
150% typ
Short Circuit Protection
Continuous, automatic recovery
Efficiency
Isolation Voltage
3.9V
3.9V
6.2V
15V
18V
see „Selection Guide“ table
In to out
I/O to case
Isolation Resistance
1600VDC min.
1600VDC min.
1 GΩ min.
Isolation Capacitance
1200pF max.
Operating Frequency
400kHz typ.
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
Natural convection
Thermal Shock
20°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Epoxy (UL94-V0)
Conducted Emissions (see Note 8)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
DIP
SMD
Dimensions
18g
20g
31.8 x 20.3 x 10.2mm
2750 x 103 hours
MTBF (see Note 2)
www.recom-international.com
Class A
Class A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
14-February-2007
231
RP12-S_DA
Series
POWERLINE
DC/DC-Converter
Notes :
1. The RP12 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input.
8. See application notes for EMI-filtering.
Package Style and Pinning (mm)
DIP24 Package Style
31.80
3rd angle
projection
20.30
10.20
3.8
2
5.10
20.30
2.54
15.20
Pin Connections
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
NC = No Connection
0.25 x 0.50
Rectangular Pin
1 2 3
9
11
16
14
Bottom View
23 22
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
Pin Pitch Tolerance ±0.35 mm
SMD Package Style
32.00
20.30
SMD Package Style
31.40
Same spec. as the original DIP spec. and pin
definition, excl. of the SMD type pin.
11.20
2.54
10.90
3.81
21.30
6.35
Pin Connections
25.40
Pin area
0.1 x 0.50
2.54
0.50
1.60
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
Top View
24.14
24 23 22 21 20
11 x 2.54
232
16 15 14 13
1
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
Others
NC
NC = No Connection
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
NC
Pin Pitch Tolerance ±0.35 mm
27.94
14-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
12 Watts Regulated Output Power
1.6kVDC Isolation
Over Current and Over Voltage Protection
Five-Sided Shield
No Derating to 61°C
Standard DIP24 Pinning
Efficiency to 88%
Selection Guide 24V and 48V Wide Input Types
DIP24 (SMD)
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4,5)
Current
mA
RP12-243.3SAW**
9-36
3.3
3500
55/602
84
2000
RP12-2405SAW**
9-36
5.1
2400
55/614
87
2000
RP12-2412SAW**
9-36
12
1000
25/610
86
430
RP12-2415SAW**
9-36
15
800
25/610
86
300
RP12-483.3SAW**
18-75
3.3
3500
20/301
84
2000
RP12-4805SAW**
18-75
5.1
2400
20/307
87
2000
RP12-4812SAW**
18-75
12
1000
13/302
87
430
RP12-4815SAW**
18-75
15
800
13/298
88
300
RP12-2405DAW**
9-36
±5
±1200
20/625
84
±1250
RP12-2412DAW**
9-36
±12
±500
25/610
86
±200
RP12-2415DAW**
9-36
±15
±400
25/610
86
±120
RP12-4805DAW**
18-75
±5
±1200
10/309
85
±1250
RP12-4812DAW**
18-75
±12
±500
13/301
87
±200
RP12-4815DAW**
18-75
±15
±400
13/301
87
±120
Part Number
Efficiency(6)Capacitive(7)
Load max.
%
µF
POWERLINE
DC/DC-Converter
RP12S_DAW
Series
12 Watt
DIP24 & SMD,
Single & Dual
Output
UL-60950-1 Certified
** add Suffix SMD for SMD package
Derating Graph (Ambient Temperature)
RP12-4805SAW
125
100
Output Power (%)
75
50
75Vin
Natural Convection
Nom Vin
25
0
-40 -25 -10 0
50 60 70 80 90 100 110
Ambient Temperature Range (°C) 65
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
9-36VDC
18-75VDC
Pi Type
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load)
50VDC
100VDC
20mAp-p
continued on next page
www.recom-international.com
14-February-2007
233
POWERLINE
RP12-S_DAW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see note 1)
450ms typ.
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
DC-DC ON
DC-DC OFF
Nominal input
Remote OFF input current
Output Power
12W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1.2%
Minimum Load
0%
Line Regulation (low line, high line at full load)
Load Regulation (0% to 100% full load)
±0.2%
±0.5%
±1%
Single
Dual
Cross Regulation Dual Output (asymmetrical load 25%/100% full load)
±5%
Ripple and Noise (20MHz bandwith)
85mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Input Voltage Variation, dv/dt
250µs
complies with ETS300 132, part 4.4
Over Load Protection (% of full load at nominal Vin)
Overvoltage Protection (Single)
Undervoltage Protection
150% typ
24V Input
48V Input
Short Circuit Protection
Zener Diode Clamp
DC-DC ON = 9VDC, DC-DC OFF = 8VDC
DC-DC ON = 18VDC, DC-DC OFF = 16VDC
Continuous, automatic recovery
Efficiency
Isolation Voltage
5V/ms
see „Selection Guide“ table
In to Out and I/O to case
1600VDC min.
Isolation Resistance
10 GΩ min.
Isolation Capacitance
1500pF max.
Operating Frequency
Operating Temperature Range
5.1, 12, 15, ±12, ±15V
3.3, ±5V
with derating
400kHz typ.
-40°C to +65°C
-40°C to +61°C
-40°C to +105°C
Maximum Case Temperature
+105°C
Storage Temperature Range
-55°C to +125°C
Thermal Impedance
Natural convection
20°C/Watt
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Weight
Conducted Emissions (see note 3)
Radiated Emissions (see note 3)
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
DIP
SMD
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
MTBF (see note 2)
234
Epoxy (UL94-V0)
18g
20g
Class A
Class A
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
5% to 95% RH
Bellcore-TR-NWT-000332
14-February-2007
2350 x 103 hours
www.recom-international.com
POWERLINE
RP12-S_DAW
Series
DC/DC-Converter
Notes :
1.
2.
3.
4.
5.
6.
7.
The ON/OFF control pin voltage is referenced to negative input.
BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
Requires external filter to meet EN55022 Class A
Typical value at nominal input voltage and no load.
Maximum value at nominal input voltage and full load
Typical value at nominal input voltage and full load.
Test by minimum Vin and constant resistor load.
Package Style and Pinning (mm)
DIP24 Package Style
3rd angle
projection
31.80
20.30
10.20
3.8
2
5.10
20.30
2.54
Pin Connections
15.20
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
NC = No Connection
0.25 x 0.50
Rectangular Pin
9
1 2 3
11
Pin Pitch Tolerance ±0.35 mm
Bottom View
16
23 22
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
14
SMD Package Style
32.00
20.30
SMD Package Style
31.40
Same spec. as the original DIP spec. and pin
definition, excl. of the SMD type pin.
11.20
2.54
10.90
3.81
21.30
6.35
Pin Connections
25.40
Pin area
0.1 x 0.50
2.54
0.50
1.60
2.40
9 10 11 12
1 2 3 4 5
23.40
Bottom View
26.54
Top View
24.14
24 23 22 21 20
16 15 14 13
11 x 2.54
www.recom-international.com
1
Pin #
Single
1
ON/OFF
2
-Vin
3
-Vin
9
NC
11
NC
14
+Vout
16
-Vout
22
+Vin
23
+Vin
Others
NC
NC = No Connection
Dual
ON/OFF
-Vin
-Vin
Com
-Vout
+Vout
Com
+Vin
+Vin
NC
Pin Pitch Tolerance ±0.35 mm
27.94
14-February-2007
235
Features
●
●
●
●
●
●
●
●
●
POWERLINE
4:1 Wide Input Voltage Range
15 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
International Safety Standard Approvals
Standard 50.8 x40.6x10.2mm Package
Efficiency to 82%
DC/DC-Converter
RP15S_DEW
Series
15 Watt
Single & Dual
Output
Selection Guide 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP15-2405SEW
9-36
5
3000
822
79
6800
RP15-2412SEW
9-36
12
1250
801
82
890
RP15-2415SEW
9-36
15
1000
801
82
570
RP15-4805SEW
18-75
5
3000
411
80
6800
RP15-4812SEW
18-75
12
1250
401
82
890
RP15-4815SEW
18-75
15
1000
401
82
570
RP15-2405DEW
9-36
±5
±1500
822
80
±1700
RP15-2412DEW
9-36
±12
±625
801
82
±300
RP15-2415DEW
9-36
±15
±500
801
82
±200
RP15-4805DEW
18-75
±5
±1500
411
80
±1700
RP15-4812DEW
18-75
±12
±625
401
82
±300
RP15-4815DEW
18-75
±15
±500
401
82
±200
UL-60950-1 Certified
Derating-Graph (Ambient Temperature)
RP15-4805SEW With Heat Sink
RP15-4805SEW
125
125
100
100
50
75
Natural Convection
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
50
Natural Convection
25
0
-40 -25 -10 0
50 60
Ambient Temperature Range (°C)
70
80 90 100
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
236
July-2006
www.recom-international.com
RP15-S_DEW
Series
POWERLINE
DC/DC-Converter
RP15-4805SEW
RP15-4805SEW
Efficiency VS Input Voltage
Efficiency VS Output load
83
82
81
80
79
78
77
76
75
74
73
36
Efficiency (%)
Efficiency (%)
Typical Characteristics
40
45
50
55
60
65
70
75
83
82
81
80
79
78
77
76
70
65
50
0.5
1
1.5
2
2.5
3
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
9-36VDC
18-75VDC
Pi Type
24V Input
48V Input
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF ( see Note 7)
DC-DC ON
Open or 3.5V < Vr < 12V
( Positive logic )
DC-DC OFF
Short or 0V < Vr < 1.2V
Remote OFF input current
Nominal input
Output Power
20mA
15W max.
Output Voltage Accuracy (full Load and nominal Vin)
±2%
Output Voltage Adjustability
±10%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
±0.5%
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
±5%
Ripple and Noise (20MHz bandwith)
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±1%
±5%
500µs
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
continued on next page
www.recom-international.com
July-2006
237
POWERLINE
RP15-S_DEW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Isolation Resistance
109 Ω min.
Isolation Capacitance
300pF max.
Operating Frequency
270kHz typ.
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
Natural convection
(see Note 8)
Natural convection with Heat Sink
10°C/Watt
8.24°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Weight
48g
Dimensions
50.8 x 40.6 x 10.2mm
2041 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP15 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The pin voltage is referenced to negative input.
8. Heat-sink option, Thermal impedance is 8.24ºC/Watt for natural convection and the P/N is 7G-0011A.
9. See application notes for EMI-filtering.
238
July-2006
www.recom-international.com
RP15-S_DEW
Series
POWERLINE
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
50.10
40.60
10.20
5.6
dia.
1.0
45.70
5
17.80
10.20
Bottom View
5.10
15.20
Pin Connections
12.70
Pin #
1
2
4
5
6
7
8
6
1
2
7
10.20
4
17.80
8
Single
+Vin
-Vin
CTRL
No Pin
+Vout
-Vout
Trim
Dual
+Vin
-Vin
CTRL
+Vout
Com
-Vout
Trim
Pin Pitch Tolerance ±0.35 mm
External Output Trimming
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
7(7)
Trim Up
8(8)
RD
RU
8(8)
www.recom-international.com
Trim Down
6(5)
July-2006
239
Features
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
15 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x25.4x10.2mm Package
Efficiency to 88%
Selection Guide 12V, 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP15-123.3SF
9-18
3.3
4000
1467
79
10200
RP15-1205SF
9-18
5
3000
1603
82
7050
RP15-1212SF
9-18
12
1250
1524
86
1035
RP15-1215SF
9-18
15
1000
1524
86
705
RP15-243.3SF
18-36
3.3
4000
724
80
10200
RP15-2405SF
18-36
5
3000
781
84
7050
RP15-2412SF
18-36
12
1250
772
85
1035
RP15-2415SF
18-36
15
1000
772
85
705
RP15-483.3SF
36-75
3.3
4000
357
81
10200
RP15-4805SF
36-75
5
3000
396
83
7050
RP15-4812SF
36-75
12
1250
377
87
1035
RP15-4815SF
36-75
15
1000
381
86
705
RP15-1205DF
9-18
±5
±1500
1582
83
±1020
RP15-1212DF
9-18
±12
±625
1524
86
±495
RP15-1215DF
9-18
±15
±500
1563
84
±165
RP15-2405DF
18-36
±5
±1500
781
84
±1020
RP15-2412DF
18-36
±12
±625
762
86
±495
RP15-2415DF
18-36
±15
±500
762
86
±165
RP15-4805DF
36-75
±5
±1500
386
85
±1020
RP15-4812DF
36-75
±12
±625
372
88
±495
RP15-4815DF
36-75
±15
±500
377
87
±165
POWERLINE
DC/DC-Converter
RP15S_DF
Series
15 Watt
2” x 1” Package
Single & Dual
Output
UL-60950-1 Certified
* add /P for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The F-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards.
240
July-2006
www.recom-international.com
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP15-4805SF With Heat Sink
RP15-4805SF
125
125
100
100
50
75
Natural Convection
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
Natural Convection
50
25
0
-40 -25 -10 0
80 90 100
50 60
Ambient Temperature Range (°C)
70
80 90 100
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
RP15-4805SF
RP15-4805SF
Efficiency VS Input Voltage
Efficiency VS Output load
83
82
81
80
79
78
77
76
75
74
73
36
Efficiency (%)
Efficiency (%)
Typical Characteristics
40
45
50
55
60
65
70
75
83
82
81
80
79
78
77
76
70
65
50
0.5
1
1.5
2
2.5
3
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
9-18VDC
18-36VDC
36-75VDC
Pi Type
12V Input
24V Input
48V Input
36VDC
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Remote OFF input current
Nominal input
Output Power
Open or 3.5V < Vr < 12V
20mA
15W max.
continued on next page
www.recom-international.com
July-2006
241
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Minimum Load (see Note 1)
10% of full load
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
±1%
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
±5%
Single
50mVp-p
Dual
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±1%
±2%
500µs
3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
3.9V
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
Single
500kHz typ.
Dual
300kHz typ.
Approved to Safety Standards
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Thermal Impedance
Natural convection
12°C/Watt
(see Note 8)
Natural convection with Heat Sink
10°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
242
July-2006
www.recom-international.com
POWERLINE
RP15-S_DF
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
27g
Dimensions
50.8 x 25.4 x 10.2mm
2041 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP15 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SF/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SF/N).
If no suffix is specified, the control pin will be omitted.
8. Heat sink is optional and P/N: 7G-0020A.
9. See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
Pin Connections
3
1
2
6
Bottom View
10.20
4
10.20
5
12.70
Pin #
Single
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
6*
CTRL*
* Optional. See Note 7.
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL*
Pin Pitch Tolerance ±0.35 mm
www.recom-international.com
July-2006
243
Features
Regulated
Converters
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
15 Watts Regulated Output Power
1.6kVDC Isolation
Over Current and Over Voltage Protection
Six-Sided Shield
No Derating to 65°C
Standard 2” x 1” Package and Pinning
Efficiency to 86%
Selection Guide 24V and 48V Wide Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4,5)
Current
mA
Efficiency(6)Capacitive(7)
Load max.
%
µF
RP15-243.3SFW
9-36
3.3
4500
60/773
84
14750
RP15-2405SFW
9-36
5
3000
60/777
86
7200
RP15-2412SFW
9-36
12
1250
75/771
85
1250
RP15-2415SFW
9-36
15
1000
75/762
86
800
RP15-483.3SFW
18-75
3.3
4500
30/422
84
14750
RP15-4805SFW
18-75
5
3000
30/381
86
7200
RP15-4812SFW
18-75
12
1250
40/385
85
1250
RP15-4815SFW
18-75
15
1000
40/381
86
800
RP15-2405DFW
9-36
±5
±1500
85/801
82
±3600
RP15-2412DFW
9-36
±12
±625
100/771
85
±625
RP15-2415DFW
9-36
±15
±500
100/762
86
±400
RP15-4805DFW
18-75
±5
±1500
45/400
82
±3600
RP15-4812DFW
18-75
±12
±625
50/385
85
±625
RP15-4815DFW
18-75
±15
±500
50/381
86
±400
POWERLINE
DC/DC-Converter
RP15S_DFW
Series
15 Watt
2” x 1”
Single & Dual
Output
* add /P for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Derating Graph (Ambient Temperature)
RP15-4805SFW
125
100
Output Power (%)
75
50
75Vin
Natural Convection
Nom Vin
25
0
-40 -25 -10 0
50 60 70 80 90 100 110
75
Ambient Temperature Range (°C)
244
November-2006
www.recom-international.com
RP15-S_DFW
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
24V nominal input
9-36VDC
48V nominal input
18-75VDC
Input Filter
Pi Type
Input Surge Voltage (100 ms max.)
24V Input
50VDC
48V Input
100VDC
Input Reflected Ripple (nominal Vin and full load)
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (Optional. See note 1)
DC-DC ON
DC-DC OFF
Nominal input
Remote OFF input current
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
Output Power
15W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Minimum Load
0%
Line Regulation (low line, high line at full load)
±0.2%
Load Regulation (0% to 100% full load)
Single
±0.5%
Dual
±1%
Cross Regulation Dual Output (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
(measured with a 104pF ceramic across the output)
±5%
3.3, 5.0V
12, 15, ±5, ±12, ±15V
50mVp-p
75mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Input Voltage Variation, dv/dt
250µs
complies with ETS300 132, part 4.4
Over Load Protection (% of full load at nominal Vin)
150% typ
Overvoltage Protection (Single)
Undervoltage Protection
Zener Diode Clamp
24V Input
48V Input
Short Circuit Protection
DC-DC ON = 9VDC, DC-DC OFF = 8VDC
DC-DC ON = 18VDC, DC-DC OFF = 16VDC
Continuous, automatic recovery
Efficiency
Isolation Voltage
5V/ms
see „Selection Guide“ table
In to Out and I/O to case
1600VDC min.
Isolation Resistance
10 GΩ min.
Isolation Capacitance
1500pF max.
Operating Frequency
400kHz typ.
Operating Temperature Range
5.1, 12, 15, ±12, ±15V
3.3, ±5V
with derating
-40°C to +75°C
-40°C to +65°C
-40°C to +105°C
Maximum Case Temperature
+105°C
Storage Temperature Range
-55°C to +125°C
Thermal Impedance (see note 8)
Natural convection
with Heatsink
12°C/Watt
10°C/Watt
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
continued on next page
www.recom-international.com
November-2006
245
RP15-S_DFW
Series
POWERLINE
DC/DC-Converter
Specifications, cont. (typical at nominal input and 25°C unless otherwise noted)
Potting Material
Epoxy (UL94-V0)
Weight
27g
Conducted Emissions (see note 3)
Radiated Emissions (see note 3)
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A
Class A
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
MTBF (see note 2)
2350 x 103 hours
Bellcore-TR-NWT-000332
Notes :
1. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SFW/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SFW/N).
If no suffix is specified, the control pin will be omitted.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Requires external filter to meet EN55022 Class A
4. Typical value at nominal input voltage and no load.
5. Maximum value at nominal input voltage and full load
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistor load.
8. Optional Heatsink Part Number 7G-0020A
Package Style and Pinning (mm)
3rd angle
projection
DIP24 Package Style
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
3
1
2
6
Bottom View
Pin Connections
10.20
4
10.20
5
12.70
Pin #
Single
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
6*
CTRL*
* Optional. See Note 1.
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL*
Pin Pitch Tolerance ±0.35 mm
246
November-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
20 Watts Output Power
1.6kVDC Isolation
ULCertified
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x40.6x10.2mm Package
Efficiency to 86%
Selection Guide 12V, 24V and 48V Input Types
Input (4) Efficiency(5) Capacitive(6)
Current
Load max.
mA
%
µF
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
RP20-123.3SE
9-18
3.3
4000
1507
77
13000
RP20-1205SE
9-18
5
4000
2193
80
6800
RP20-1212SE
9-18
12
1670
2136
82
2200
RP20-1215SE
9-18
15
1330
2136
82
755
RP20-243.3SE
18-36
3.3
4000
743
78
13000
RP20-2405SE
18-36
5
4000
1082
81
6800
RP20-2412SE
18-36
12
1670
1054
83
2200
RP20-2415SE
18-36
15
1330
1054
83
755
RP20-483.3SE
36-75
3.3
4000
367
79
13000
RP20-4805SE
36-75
5
4000
543
82
6800
RP20-4812SE
36-75
12
1670
527
83
2200
RP20-4815SE
36-75
15
1330
527
83
755
RP20-1205DE
9-18
±5
±2000
2193
80
±3400
RP20-1212DE
9-18
±12
±833
2136
82
±680
RP20-1215DE
9-18
±15
±666
2136
82
±450
RP20-2405DE
18-36
±5
±2000
1082
81
±3400
RP20-2412DE
18-36
±12
±833
1054
83
±680
RP20-2415DE
18-36
±15
±666
1041
84
±450
RP20-4805DE
36-75
±5
±2000
541
81
±3400
RP20-4812DE
36-75
±12
±833
514
85
±680
RP20-4815DE
36-75
±15
±666
508
86
±450
RP20-123.312TE
9-18
3.3 / ±12
3000 / ±300
1926
78
4700 /±220
RP20-123.315TE
9-18
3.3 / ±15
3000 / ±250
1959
78
4700 /±220
RP20-120512TE
9-18
5 / ±12
2000 / ±300
1885
80
4700 /±220
RP20-120515TE
9-18
5 / ±15
2000 / ±250
1919
80
4700 /±220
RP20-243.312TE
18-36
3.3 / ±12
3000 / ±300
950
79
4700 /±220
RP20-243.315TE
18-36
3.3 / ±15
3000 / ±250
967
79
4700 /±220
RP20-240509TE
18-36
5 / ±9
2000 / ±555
1068
82
4700 /±380
RP20-240512TE
18-36
5 / ±12
2000 / ±300
931
81
4700 /±220
RP20-240515TE
18-36
5 / ±15
2000 / ±250
947
81
4700 /±220
RP20-483.312TE
36-75
3.3 / ±12
3000 / ±300
468
80
4700 /±220
RP20-483.315TE
36-75
3.3 / ±15
3000 / ±250
477
80
4700 /±220
RP20-480512TE
36-75
5 / ±12
2000 / ±300
459
82
4700 /±220
RP20-480515TE
36-75
5 / ±15
2000 / ±250
467
82
4700 /±220
POWERLINE
DC/DC-Converter
RP20S_D_TE
Series
20 Watt
Single, Dual &
Triple Output
UL-60950-1 Certified
Description
The E-Series of DC/DC Converters are fully certified to EN 60950: 2000.
The E-series of these DC/DC-converters is designed to meet UL 60950. This makes them ideal for all
telecom and safety applications where approved isolation is required. They are also designed to meet
UL 1950 and CSA 950 standards (10).
www.recom-international.com
05-May-2007
247
POWERLINE
RP20-S_D_TE
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP20-4805SE With Heat Sink
RP20-4805SE
125
125
100
100
50
75
Natural Convection
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
Natural Convection
50
25
0
-40 -25 -10 0
50 60
69
Ambient Temperature Range (°C)
80 90 100
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Typical Characteristics
RP20-4805SE
RP20-4805SE
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Efficiency VS Input Voltage
85
84
83
82
81
80
79
78
77
76
75
74
36 40
45
50
55
60
65
70
75
85
84
83
82
81
80
78
76
74
70
65
60
0.5
1
1.5
2
2.5
3
2.5
4
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Input Filter
Input Surge Voltage (100 ms max.)
12V nominal input
24V nominal input
48V nominal input
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
( Positive logic )
Remote OFF input current
Output Power
Output Voltage Accuracy (full Load and nominal Vin)
9-18VDC
18-36VDC
36-75VDC
Pi Type
36VDC
50VDC
100VDC
25mAp-p
DC-DC ON
DC-DC OFF
Nominal input
20ms typ.
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
20mA
Single & Dual
Triple 3.3V, 5V
Auxiliary
20W max.
±2%
±2%
±5%
Voltage Adjustability
±10%
continued on next page
248
05-May-2007
www.recom-international.com
RP20-S_D_TE
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Minimum Load (see Note 1)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 9)
Ripple and Noise (20MHz bandwith)
Single (W)
Dual (W)
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
Dual
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
10% of full load
±0.2%
±0.5%
±1%
±5%
±0.5%
±3%
±2%
±5%
±5%
±2%
±5%
75mVp-p
100mVp-p
50mVp-p
1% of Vout
±0.02%/°C max.
3.3V
5V
12V
15V
500µs
3.9V
6.2V
15V
18V
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards (see Note 10)
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
Thermal Impedance
(see Note 8)
-55°C to +105°C
10°C/Watt
8.24°C/Watt
Natural convection
Natural convection with Heat Sink
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 11)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
www.recom-international.com
05-May-2007
249
POWERLINE
RP20-S_D_TE
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
48g
Dimensions
50.8 x 40.6 x 10.2mm
1928 x 103 hours
MTBF (see Note 2)
Notes :
1. The RP20 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control voltage is reference to negative input.
8. Heat sink is optional and P/N: 7G-0011A. Operation temperature range please see curve.
9. Cross regulation:
Dual output—Asymmetrical load 25% to 100% full load
Triple output – 3.3V / 5V 100% load and one of auxiliary 100% load, other auxiliary load change from 25% to 100% load
10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.10
40.60
10.20
5.6
dia.
1.0
Pin Connections
Pin #
1
2
4
5
6
7
8
45.70
5
17.80
5.10
15.20
10.20
1
Bottom View
Dual
+Vin
-Vin
CTRL
+Vout
Com
-Vout
Trim
External Output Trimming
2
7
4
10.20
17.80
8
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
7(7)
Trim Up
8(8)
8(8)
05-May-2007
Trim Down
RD
RU
250
Triple
+Vin
-Vin
CTRL
+Auxiliary
+3.3V / 5V
Com
-Auxiliary
Pin Pitch Tolerance ±0.35 mm
12.70
6
Single
+Vin
-Vin
CTRL
No Pin
+Vout
-Vout
Trim
6(5)
www.recom-international.com
Features
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
20 Watts Output Power
1.6kVDC Isolation
UL 60950 Pending
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x40.6x10.2mm Package
Efficiency to 84%
POWERLINE
DC/DC-Converter
RP20S_DEW
Series
20 Watt
Single & Dual
Output
Selection Guide 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP20-243.3SEW
9-36
3.3
4000
764
76
13000
RP20-2405SEW
9-36
5
4000
1111
79
6800
RP20-2412SEW
9-36
12
1670
1082
81
2200
RP20-2415SEW
9-36
15
1330
1082
81
755
RP20-483.3SEW
18-75
3.3
4000
377
77
13000
RP20-4805SEW
18-75
5
4000
548
80
6800
RP20-4812SEW
18-75
12
1670
541
81
2200
RP20-4815SEW
18-75
15
1330
541
81
755
RP20-2405DEW
9-36
±5
±2000
1111
79
±3400
RP20-2412DEW
9-36
±12
±833
1082
81
±680
RP20-2415DEW
9-36
±15
±666
1068
82
±450
RP20-4805DEW
18-75
±5
±2000
556
79
±3400
RP20-4812DEW
18-75
±12
±833
527
83
±680
RP20-4815DEW
18-75
±15
±666
521
84
±450
www.recom-international.com
July-2006
251
POWERLINE
RP20-S_DEW
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP20-2412SEW With Heat Sink
RP20-2412SEW
125
125
100
100
50
75
Natural Convection
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C) 56°C
25
0
-40 -25 -10 0
125
100
100
75
Natural Convection
Output Power (%)
50
80 90 100
65°C
RP20-2412DEW With Heat Sink
125
75
50 60 70
Ambient Temperature Range (°C)
RP20-2412DEW
Output Power (%)
Natural Convection
50
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C) 64°C
50
Natural Convection
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
71°C
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Input Filter
Input Surge Voltage (100 ms max.)
24V nominal input
48V nominal input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
( Positive logic )
Remote OFF input current
Output Power
Output Voltage Accuracy (full Load and nominal Vin)
Voltage Adjustability
Line Regulation (low line, high line at full load)
9-36VDC
18-75VDC
Pi Type
50VDC
100VDC
25mAp-p
DC-DC ON
DC-DC OFF
Nominal input
20ms typ.
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
20mA
Single & Dual
Auxiliary
20W max.
±2%
±5%
Single (W)
Dual (W)
Auxiliary
Minimum Load (see Note 1)
±10%
±0.2%
±0.5%
±5%
10% of full load
continued on next page
252
July-2006
www.recom-international.com
POWERLINE
RP20-S_DEW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 9)
Ripple and Noise (20MHz bandwith)
Single (W)
Dual (W)
Auxiliary
Single
Dual
Auxiliary
Dual
Auxiliary
Single
Dual
Auxiliary
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±0.2%
±0.5%
±5%
±0.5%
±3%
±5%
±5%
±5%
75mVp-p
100mVp-p
1% of Vout
±0.02%/°C max.
3.3V
5V
12V
15V
500µs
3.9V
6.2V
15V
18V
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards
EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
Thermal Impedance
(see Note 8)
-55°C to +105°C
10°C/Watt
8.24°C/Watt
Natural convection
Natural convection with Heat Sink
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
48g
Dimensions
50.8 x 40.6 x 10.2mm
1928 x 103 hours
MTBF (see note 2)
www.recom-international.com
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
July-2006
253
POWERLINE
RP20-S_DEW
Series
DC/DC-Converter
Notes :
1. The RP20 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control voltage is reference to negative input.
8. Heat sink is optional and P/N: 7G-0011A. Operation temperature range please see curve.
9. Cross regulation:
Dual output—Asymmetrical load 25% to 100% full load
Triple output – 3.3V / 5V 100% load and one of auxiliary 100% load, other auxiliary load change from 25% to 100% load
10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.10
40.60
10.20
5.6
dia.
1.0
Pin Connections
45.70
Pin #
1
2
4
5
6
7
8
5
17.80
Bottom View
5.10
15.20
1
10.20
12.70
6
Single
+Vin
-Vin
CTRL
No Pin
+Vout
-Vout
Trim
Dual
+Vin
-Vin
CTRL
+Vout
Com
-Vout
Trim
Pin Pitch Tolerance ±0.35 mm
2
7
4
10.20
17.80
8
External Output Trimming
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
7(7)
Trim Up
8(8)
RD
RU
8(8)
254
July-2006
Trim Down
6(5)
www.recom-international.com
Features
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
20 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x25.4x10.2mm Package
Efficiency to 89%
Selection Guide 12V, 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP20-121.5SF
9-18
1.5
6000
1014
78
65000
RP20-121.8SF
9-18
1.8
6000
1200
79
65000
RP20-122.5SF
9-18
2.5
6000
1603
82
33000
RP20-123.3SF
9-18
3.3
5000
1719
84
13000
RP20-1205SF
9-18
5
4000
2008
87
6800
RP20-1212SF
9-18
12
1670
2062
85
2200
RP20-1215SF
9-18
15
1330
2052
85
755
RP20-241.5SF
18-36
1.5
6000
493
80
65000
RP20-241.8SF
18-36
1.8
6000
584
81
65000
RP20-242.5SF
18-36
2.5
6000
781
84
33000
RP20-243.3SF
18-36
3.3
5000
838
86
13000
RP20-2405SF
18-36
5
4000
980
89
6800
RP20-2412SF
18-36
12
1670
1006
87
2200
RP20-2415SF
18-36
15
1330
1002
87
755
RP20-481.5SF
36-75
1.5
6000
247
80
65000
RP20-481.8SF
36-75
1.8
6000
288
82
65000
RP20-482.5SF
36-75
2.5
6000
391
84
33000
RP20-483.3SF
36-75
3.3
5000
414
87
13000
RP20-4805SF
36-75
5
4000
490
89
6800
RP20-4812SF
36-75
12
1670
497
88
2200
RP20-4815SF
36-75
15
1330
500
87
755
RP20-1212DF
9-18
±12
±833
2032
86
±680
RP20-1215DF
9-18
±15
±667
2034
86
±450
RP20-2412DF
18-36
±12
±833
1004
87
±680
RP20-2415DF
18-36
±15
±667
1005
87
±450
RP20-4812DF
36-75
±12
±833
496
88
±680
RP20-4815DF
36-75
±15
±667
502
87
±450
POWERLINE
DC/DC-Converter
RP20S_DF
Series
20 Watt
2” x 1” Package
Single & Dual
Output
UL-60950-1 Certified
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
www.recom-international.com
July-2006
255
RP20-S_DF
Series
POWERLINE
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP20-1205SF With Heat Sink
RP20-1205SF
125
125
100
100
75
Natural Convection
50
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
Ambient Temperature Range (°C)
80 90 100
Natural Convection
50
25
0
-40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C)
65°C
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Typical Characteristics
RP20-481.5SF
RP20-481.5SF
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Efficiency VS Input Voltage
83
82
81
80
79
78
77
76
75
74
73
72
36
40
45
50
55
60
65
70
75
Input Voltage (V)
82
81
80
79
78
77
76
74
72
70
65
60
1
2
3
4
5
6
Output Load (A)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
9-18VDC
18-36VDC
36-75VDC
Input Filter (see Note 9)
L-C Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
Remote OFF input current
5V/ms max
36VDC
50VDC
100VDC
20mAp-p
DC-DC ON
DC-DC OFF
Nominal input
Output Power
10ms typ.
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
20W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Voltage Adjustability
±10%
continued on next page
256
July-2006
www.recom-international.com
RP20-S_DF
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Minimum Load (see Note 1)
Single
Dual
0%
10% of full load
Line Regulation (low line, high line at full load)
±0.2%
Load Regulation (25% to 100% full load)
±0.5%
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
(Measured with a 1004pF/50V MLCC)
Dual
Single 1.5, 1.8, 2.5, 3.3V
Single 5, 12, 15V
Dual 5, 12, 15V
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
500µs
1.5, 1.8, 2.5, 3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
3.9V
6.2V
15V
18V
150% typ
Short Circuit Protection
Efficiency
Isolation Voltage
±5%
60mVp-p
75mVp-p
100mVp-p
Hiccup, automatic recovery
Input to Output
Input (Output) to case
Isolation Resistance
see „Selection Guide“ table
1600VDC min.
1600VDC min.
1 GΩ min.
Isolation Capacitance
1000pF max.
Operating Frequency
500kHz typ.
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
Thermal Impedance
(see Note 8)
-55°C to +105°C
Natural convection
Natural convection with Heat Sink
Thermal Shock
12°C/Watt
10°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
27g
Dimensions
50.8 x 25.4 x 10.2mm
1791 x 103 hours
MTBF (see Note 2)
www.recom-international.com
Class A
Class A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
July-2006
257
POWERLINE
RP20-S_DF
Series
DC/DC-Converter
Notes :
1. The RP20-S_DF series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is standard, no suffix (Ex. RP20-2405SF)
Negative logic ON/OFF is marked with suffix-N (Ex. RP20-2405SF/N).
8. Heat sink is optional and P/N: 7G-0020A.
9. An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90m Ω.
10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
Pin Connections
Pin #
1
2
3
4
5
6
3
1
2
6
Bottom View
10.20
4
10.20
5
12.70
Single
+Vin
-Vin
+Vout
Trim
-Vout
CTRL
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL
Pin Pitch Tolerance ±0.35 mm
External Output Trimming
Output can be externally trimmed by using the method
shown below.
5
Trim Up
4
RD
RU
4
258
July-2006
Trim Down
3
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
20 Watts Regulated Output Power
1.6kVDC Isolation
Over Current and Over Voltage Protection
Six-Sided Shield
No Derating to 63°C
Standard 2” x 1” Package and Pinning
Efficiency to 86%
Selection Guide 24V and 48V Wide Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4,5)
Current
mA
Efficiency(6) Capacitive(7)
Load max.
%
µF
RP20-243.3SFW
9-36
3.3
5500
60/922
84
18000
RP20-2405SFW
9-36
5
4000
60/1016
86
9600
RP20-2412SFW
9-36
12
1670
75/1031
85
1650
RP20-2415SFW
9-36
15
1330
75/1014
86
1050
RP20-483.3SFW
18-75
3.3
5500
30/461
84
18000
RP20-4805SFW
18-75
5
4000
30/508
86
9600
RP20-4812SFW
18-75
12
1670
40/515
85
1650
RP20-4815SFW
18-75
15
1330
40/507
86
1050
RP20-2405DFW
9-36
±5
±2000
85/1068
82
±4800
RP20-2412DFW
9-36
±12
±833
100/1028
85
±625
RP20-2415DFW
9-36
±15
±667
100/1017
86
±525
RP20-4805DFW
18-75
±5
±2000
45/534
82
±4800
RP20-4812DFW
18-75
±12
±833
50/514
85
±825
RP20-4815DFW
18-75
±15
±667
50/508
86
±525
POWERLINE
DC/DC-Converter
RP20S_DFW
Series
20 Watt
2” x 1”
Single & Dual
Output
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Derating Graph (Ambient Temperature)
RP20-4805SFW
125
100
Output Power (%)
75
50
Nom Vin
Natural Convection
25
18Vin
0
-40 -25 -10 0
50 60 70 80 90 100 110
Ambient Temperature Range (°C) 63
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
www.recom-international.com
November-2006
259
POWERLINE
RP20-S_DFW
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
24V nominal input
9-36VDC
48V nominal input
18-75VDC
Input Filter
Pi Type
Input Surge Voltage (100 ms max.)
24V Input
50VDC
48V Input
100VDC
Input Reflected Ripple (nominal Vin and full load)
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (see Note 1)
DC-DC ON
DC-DC OFF
Nominal input
Remote OFF input current
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
Output Power
20W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Minimum Load
0%
Line Regulation (low line, high line at full load)
±0.2%
Load Regulation (0% to 100% full load)
Single
±0.5%
Dual
±1%
Cross Regulation Dual Output (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
±5%
3.3V
5.0, 12, 15V
±5, ±12, ±15V
60mVp-p
75mVp-p
100mVp-p
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Input Voltage Variation, dv/dt
250µs
complies with ETS300 132, part 4.4
Over Load Protection (% of full load at nominal Vin)
150% typ
Overvoltage Protection (Single)
Undervoltage Protection
Zener Diode Clamp
24V Input
48V Input
Short Circuit Protection
DC-DC ON = 9VDC, DC-DC OFF = 8VDC
DC-DC ON = 18VDC, DC-DC OFF = 16VDC
Continuous, automatic recovery
Efficiency
Isolation Voltage
5V/ms
see „Selection Guide“ table
In to Out and I/O to case
1600VDC min.
Isolation Resistance
10 GΩ min.
Isolation Capacitance
1500pF max.
Operating Frequency
Operating Temperature Range
400kHz typ.
no derating
with derating
-40°C to +63°C
-40°C to +105°C
Maximum Case Temperature
+105°C
Storage Temperature Range
-55°C to +125°C
Thermal Impedance (see Note 8)
Natural convection
with Heatsink
12°C/Watt
10°C/Watt
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
continued on next page
260
November-2006
www.recom-international.com
POWERLINE
RP20-S_DFW
Series
DC/DC-Converter
Specifications, cont. (typical at nominal input and 25°C unless otherwise noted)
Potting Material
Epoxy (UL94-V0)
Weight
27g
Conducted Emissions (see Note 3)
Radiated Emissions (see Note 3)
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A
Class A
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
MTBF (see Note 2)
2350 x 103 hours
Bellcore-TR-NWT-000332
Notes :
1. The RP20-S_DFW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Requires external filter to meet EN55022 Class A
4. Typical value at nominal input voltage and no load.
5. Maximum value at nominal input voltage and full load
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistor load.
8. Optional Heatsink Part Number 7G-0020A
9. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is standard, no suffix (Ex. RP20-2405SF)
Negative logic ON/OFF is marked with suffix-N (Ex. RP20-2405SF/N).
Package Style and Pinning (mm)
50.80
3rd angle
projection
25.40
10.20
dia.
1.0
5.6
2.50
5.10
20.30
15.20
Pin Connections
3
1
Bottom View
2
6
10.20
4
10.20
5
12.70
Pin #
1
2
3
4
5
6
Single
+Vin
-Vin
+Vout
Trim
-Vout
CTRL
Dual
+Vin
-Vin
+Vout
Com
-Vout
CTRL
Pin Pitch Tolerance ±0.35 mm
External Output Trimming
Single Output can be trimmed ±10% by using external resistors
See Application Notes for details
5
November-2006
4
Trim Down
RD
RU
4
www.recom-international.com
Trim Up
3
261
Features
●
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
30 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
International Safety Standard Approvals
Standard 50.8 x40.6x10.2mm Package
Efficiency to 90%
Selection Guide 12V, 24V and 48V Input Types
Input
Output
Output
Input (4)
Range
VDC
Voltage
VDC
Current
mA
Current
mA
%
Load max.
µF
RP30-121.5SE
9-18
1.5
6000
1014
78
85800
RP30-121.8SE
9-18
1.8
6000
1169
81
65000
RP30-122.5SE
9-18
2.5
6000
1582
83
33000
RP30-123.3SE
9-18
3.3
6000
2037
85
19500
RP30-1205SE
9-18
5
6000
3012
87
10200
RP30-1212SE
9-18
12
2500
2976
88
3240
RP30-1215SE
9-18
15
2000
2976
88
1100
RP30-241.5SE
18-36
1.5
6000
493
80
85800
RP30-241.8SE
18-36
1.8
6000
580
82
65000
RP30-242.5SE
18-36
2.5
6000
780
84
33000
RP30-243.3SE
18-36
3.3
6000
1010
86
19500
RP30-2405SE
18-36
5
6000
1490
88
10200
RP30-2412SE
18-36
12
2500
1470
89
3300
RP30-2415SE
18-36
15
2000
1470
89
1100
RP30-481.5SE
36-75
1.5
6000
244
81
85800
RP30-481.8SE
36-75
1.8
6000
290
83
65000
RP30-482.5SE
36-75
2.5
6000
390
85
33000
RP30-483.3SE
36-75
3.3
6000
500
87
19500
RP30-4805SE
36-75
5
6000
740
89
10200
RP30-4812SE
36-75
12
2500
730
90
3300
RP30-4815SE
36-75
15
2000
730
90
1100
RP30-1212DE
9-18
±12
±1250
3012
87
±1020
RP30-1215DE
9-18
±15
±1000
3012
87
±675
RP30-2412DE
18-36
±12
±1250
1488
88
±1020
RP30-2415DE
18-36
±15
±1000
1488
88
±675
RP30-4812DE
36-75
±12
±1250
744
88
±1020
RP30-4815DE
36-75
±15
±1000
744
88
±675
Part Number
Efficiency(5) Capacitive(6)
POWERLINE
DC/DC-Converter
RP30S_DE
Series
30 Watt
Single & Dual
Output
UL-60950-1 Certified
Description
The E-series of these DC/DC-converters is designed to meet UL 60950. This makes them ideal for all
telecom and safety applications where approved isolation is required. They are also designed to meet
UL 1950 and CSA 950 standards.
262
July-2006
www.recom-international.com
POWERLINE
RP30-S_DE
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP30-4805SE With Heat Sink
RP30-4805SE
125
125
100
100
50
75
Natural Convection
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
25
0
-40 -25 -10 0
80 90 100
Ambient Temperature Range (°C)
Natural Convection
50
50 60 70
Ambient Temperature Range (°C)
62°C
80 90 100
71°C
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Typical Characteristics
RP30-4805SE
RP30-4805SE
93
92
91
90
89
88
87
86
85
84
83
82
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Efficiency VS Input Voltage
36
40
45
50
55
60
65
70
75
Intput Voltage (V)
92
90
89
88
87
86
85
84
80
78
76
74
1
2
3
4
5
6
Output Load (A)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Under Voltage Lockout
12V nominal input
24V nominal input
48V nominal input
12V input DC-DC ON
DC-DC OFF
24V input DC-DC ON
DC-DC OFF
48V input DC-DC ON
DC-DC OFF
Input Filter (see Note 1)
L-C Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
Remote OFF input current
9-18VDC
18-36VDC
36-75VDC
9VDC
8VDC
17.8VDC
16VDC
36VDC
33VDC
5V/ms max
36VDC
50VDC
100VDC
30mAp-p
DC-DC ON
DC-DC OFF
Nominal input
25ms typ.
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
continued on next page
www.recom-international.com
July-2006
263
RP30-S_DE
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Power
30W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Voltage Adjustability
Minimum Load
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation
Ripple and Noise (20MHz bandwith)
(Measured with a 1004pF/50V MLCC)
±10%
Single & Dual
Single
Dual
Single
Dual
Single 1.5, 1.8, 2.5, 3.3, 5V
Single 12, 15V
Dual 5, 12, 15V
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
0%
±0.2%
±0.5%
±0.5%
±1%
±5%
50mVp-p
75mVp-p
100mVp-p
300µs
1.5, 1.8, 2.5, 3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
3.9V
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
1000pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Over Temperature Protection
Thermal Impedance
(see Note 8)
Natural convection
Natural convection with Heat Sink
Thermal Shock
115°C typ.
10°C/Watt
8.24°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A
Class A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
264
July-2006
www.recom-international.com
RP30-S_DE
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
48g
Dimensions
50.8 x 40.6 x 10.2mm
1535 x 103 hours
MTBF (see Note 2)
Notes :
1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90m Ω.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input
8. Heat sink is optional and P/N: 7G-0011A.
9. See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
40.60
10.20
5.6
dia.
1.0
Pin Connections
Pin #
1
2
4
5
6
7
8
45.70
5
Bottom View
15.20
Dual
+Vin
-Vin
CTRL
+Vout
Com
-Vout
Trim
Pin Pitch Tolerance ±0.35 mm
17.80
5.10
Single
+Vin
-Vin
CTRL
No Pin
+Vout
-Vout
Trim
1
10.20
12.70
6
External Output Trimming
2
7
4
10.20
17.80
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
8
7(7)
Trim Up
8(8)
RD
RU
8(8)
www.recom-international.com
July-2006
Trim Down
6(5)
265
Features
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
30 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
Standard 50.8 x40.6x10.2mm Package
Efficiency to 88%
Selection Guide 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP30-241.5SEW
10-40
1.5
8000
658
80
65000
RP30-241.8SEW
10-40
1.8
8000
759
83
65000
RP30-242.5SEW
10-40
2.5
8000
1029
85
33000
RP30-243.3SEW
10-40
3.3
6000
994
87
19500
RP30-2405SEW
10-40
5
6000
1506
87
10200
RP30-2412SEW
10-40
12
2500
1506
87
3300
RP30-2415SEW
10-40
15
2000
1488
88
1100
RP30-481.5SEW
18-75
1.5
8000
329
80
65000
RP30-481.8SEW
18-75
1.8
8000
380
83
65000
RP30-482.5SEW
18-75
2.5
8000
508
86
33000
RP30-483.3SEW
18-75
3.3
6000
497
87
19500
RP30-4805SEW
18-75
5
6000
744
88
10200
RP30-4812SEW
18-75
12
2500
753
87
3300
RP30-4815SEW
18-75
15
2000
744
88
1100
RP30-2412DEW
10-40
±12
±1250
1543
85
±1000
RP30-2415DEW
10-40
±15
±1000
1524
86
±680
RP30-4812DEW
18-75
±12
±1250
762
86
±1000
RP30-4815DEW
18-75
±15
±1000
753
87
±680
POWERLINE
DC/DC-Converter
RP30S_DEW
Series
30 Watt
Single & Dual
Output
UL-60950-1 Certified
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The EW-Series of DC/DC Converters are fully certified to EN 60950: 2000.
This makes them ideal for all
Telecom and safety applications where approved isolation is required.
266
July-2006
www.recom-international.com
POWERLINE
RP30-S_DEW
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP30-2412SEW With Heat Sink
RP30-2412SEW
125
125
100
100
75
Natural Convection
50
Output Power (%)
Output Power (%)
75
25
0
-40 -25 -10 0
50 60 70
25
0
-40 -25 -10 0
80 90 100
Ambient Temperature Range (°C)
Natural Convection
50
50 60 70
Ambient Temperature Range (°C)
55°C
80 90 100
64°C
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
88
87
86
85
84
83
82
81
80
79
78
RP30-483.3SEW
RP30-483.3SEW
Efficiency VS Input Voltage
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Typical Characteristics
10
15
20
25
30
35
40
87
86
85
84
83
82
81
80
75
70
65
1
2
3
4
5
6
Output Load (A)
Intput Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Under Voltage Lockout
24V nominal input
48V nominal input
24V input DC-DC ON
DC-DC OFF
48V input DC-DC ON
DC-DC OFF
Input Filter (see Note 1)
L-C Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
Input Surge Voltage (100 ms max.)
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
Remote OFF input current
10-40VDC
18-75VDC
10VDC
8VDC
18VDC
16VDC
5V/ms max
50VDC
100VDC
20mAp-p
DC-DC ON
DC-DC OFF
Nominal input
Output Power
10ms typ.
Open or 3.0V < Vr < 12V
Short or 0V < Vr < 1.2V
3mA
30W max.
continued on next page
www.recom-international.com
July-2006
267
RP30-S_DEW
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Output Voltage Accuracy (full Load and nominal Vin)
±1%
Voltage Adjustability
Minimum Load
±10%
Single
Dual
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 9)
Ripple and Noise (20MHz bandwith)
(Measured with a 1004pF/50V MLCC)
Single
Dual
Single 1.5, 1.8, 2.5, 3.3V
Single 5V
Single 12, 15V
Dual 5, 12, 15V
Temperature Coefficient
10% of full load
±0.5%
±0.5%
±1%
±5%
60mVp-p
75mVp-p
100mVp-p
100mVp-p
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
0%
300µs
1.5, 1.8, 2.5, 3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
3.9V
6.2V
15V
18V
150% typ
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
1000pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards
EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
-55°C to +105°C
Over Temperature Protection
Thermal Impedance
(see Note 8)
115°C typ.
10°C/Watt
8.24°C/Watt
Natural convection
Natural convection with Heat Sink
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A
Class A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
268
July-2006
www.recom-international.com
RP30-S_DEW
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
48g
Dimensions
50.8 x 40.6 x 10.2mm
1315 x 103 hours
MTBF (see Note 2)
Notes :
1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90m Ω.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SEW)
Negative logic ON/OFF is marked with suffix-N (Ex. RP30-2405SEW/N).
8. Heat sink is optional and P/N: 7G-0011A.
9. The dual output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage
these devices, however they may not meet all listed specification.
10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
40.60
10.20
5.6
dia.
1.0
Pin Connections
Pin #
1
2
4^
5
6
7
8
45.70
5
17.80
Bottom View
5.10
15.20
1
Dual
+Vin
-Vin
CTRL
+Vout
Com
-Vout
Trim
Pin Pitch Tolerance ±0.35 mm
10.20
12.70
6
External Output Trimming
2
7
4
Single
+Vin
-Vin
CTRL
No Pin
+Vout
-Vout
Trim
10.20
17.80
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
8
7(7)
Trim Up
8(8)
RD
RU
8(8)
www.recom-international.com
July-2006
Trim Down
6(5)
269
Features
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
40 Watts Output Power
1.6kVDC Isolation
Fixed Operating Frequency
Six-Sided Continuous Shield
Design Meet Safety Standard
Standard 76.2 x66.0x10.2mm Package
Efficiency to 90%
Selection Guide 12V, 24V and 48V Input Types
Input (4) Efficiency(5) Capacitive(6)
Current
Load max.
mA
%
µF
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
RP40-123.3SE
9-18
3.3
10000
3530
85
25800
RP40-1205SE
9-18
5
8000
4170
87
13600
RP40-1212SE
9-18
12
3400
4100
88
2400
RP40-1215SE
9-18
15
2700
4100
88
1550
RP40-243.3SE
18-36
3.3
10000
1720
84
25800
RP40-2405SE
18-36
5
8000
2010
87
13600
RP40-2412SE
18-36
12
3400
1980
90
2400
RP40-2415SE
18-36
15
2700
2000
88
1550
RP40-483.3SE
36-75
3.3
10000
850
85
25800
RP40-4805SE
36-75
5
8000
980
89
13600
RP40-4812SE
36-75
12
3400
1000
89
2400
RP40-4815SE
36-75
15
2700
1000
88
1550
RP40-1205DE
9-18
±5
+7000 / -1000
4330
81
12000 / 1700
RP40-1212DE
9-18
±12
±1800
4550
83
±1200
RP40-1215DE
9-18
±15
±1400
4430
83
±750
RP40-2405DE
18-36
±5
+7000 / -1000
2130
82
12000 / 1700
RP40-2412DE
18-36
±12
±1800
2170
87
±1200
RP40-2415DE
18-36
±15
±1400
2140
86
±750
RP40-4805DE
36-75
±5
+7000 / -1000
1060
84
12000 / 1700
RP40-4812DE
36-75
±12
±1800
1100
86
±1200
RP40-4815DE
36-75
±15
±1400
1100
86
±750
RP40-123.305DE
9-18
3.3 / 5
4000 / 4000
3730
78
10300 / 6800
RP40-243.305DE
18-36
3.3 / 5
4000 / 4000
1840
79
10300 / 6800
RP40-483.305DE
36-75
3.3 / 5
4000 / 4000
910
80
10300 / 6800
RP40-120512TE
9-18
5 / ±12
4000 / ±850
4490
79
6800 / ±590
RP40-120515TE
9-18
5 / ±15
4000 / ±680
4430
80
6800 / ±380
RP40-240512TE
18-36
5 / ±12
4000 / ±850
2180
81
6800 / ±590
RP40-240515TE
18-36
5 / ±15
4000 / ±680
2160
82
6800 / ±380
RP40-480512TE
36-75
5 / ±12
4000 / ±850
1060
83
6800 / ±590
RP40-480515TE
36-75
5 / ±15
4000 / ±680
1060
83
6800 / ±380
270
July-2006
POWERLINE
DC/DC-Converter
RP40S_D_TE
Series
40 Watt
Single, Dual,
Positive Dual &
Triple Output
www.recom-international.com
RP40-S_D_TE
Series
POWERLINE
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP40-4805SE
125
100
Output Power (%)
75
50
Natural Convection
25
0
-40 -25 -10 0
50 60
Ambient Temperature Range (°C)
70 80 90 100
55°C
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
Typical Characteristics
RP40-4805SE
RP40-4805SE
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Efficiency VS Input Voltage
91
90
89
88
87
86
85
84
83
82
81
80
36
40
45
50
55
60
65
70
75
91
90
89
88
86
84
82
80
70
60
50
45
0,5
1
2
3
4
5
6
7
8
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
Pi Type
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
Remote OFF input current
Output Power
Output Voltage Accuracy (full Load and nominal Vin)
9-18VDC
18-36VDC
36-75VDC
36VDC
50VDC
100VDC
40mAp-p
DC-DC ON
DC-DC OFF
Nominal input
25ms typ.
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
30mA
Single & Dual
Triple 3.3V, 5V
Auxiliary
40W max.
±2%
±2%
±5%
continued on next page
www.recom-international.com
July-2006
271
RP40-S_D_TE
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Voltage Adjustability
Minimum Load (see Note 1)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 8)
RP40-xx3.305DE
others
Single
Dual
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
Dual
Triple 3.3V, 5V
Auxiliary
Ripple and Noise (20MHz bandwith)
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±10%
20% min.
10% of full load
±0.5%
±1%
±2%
±5%
±0.5%
±1%
±2%
±5%
±1%
±1%
±5%
1%/p-p of Vout max.
±0.02%/°C max.
3.3V
5V
12V
15V
500µs
3.9V
6.2V
15V
18V
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
500pF max.
Operating Frequency
185kHz typ.
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance
+100°C
Natural convection
Thermal Shock
-55°C to +105°C
7.3°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic FR4
Potting Material
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
48g
Dimensions
76.2 x 66.0 x 10.2mm
1315 x 103 hours
MTBF (see Note 2)
272
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
July-2006
www.recom-international.com
RP40-S_D_TE
Series
POWERLINE
DC/DC-Converter
Notes :
1. The RP40 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage
these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input
8. Cross regulation:
Dual output—Asymmetrical load 25% to 100% full load
Triple output – 3.3V / 5V 100% load and one of auxiliary 100% load, other
auxiliary load change from 25% to 100% load
9. See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
66.00
76.20
10.20
8.00
dia.
1.0
63.50
7.6
Pin Connections
10.20
17.80
10
10.20
4
9
10.20
10.20
3
10.20
Bottom View
8
12.70
2
7
15.20
7.60
1
Pin #
Single
1
CTRL
2
+Vin
3
-Vin
4
SYNC
5
Trim Down
6
Trim
7
Trim Up
8
+Vout
9
-Vout
10
No Pin
NC = No Connection
Dual
CTRL
+Vin
-Vin
SYNC
+Vout
Com
-Vout
Trim
NC
NC
Triple
CTRL
+Vin
-Vin
SYNC
+Aux
Com (Aux)
-Aux
+Vout(Primary)
Com(Primary)
Trim
3.3V / 5V
CTRL
+Vin
-Vin
SYNC
3.3V
Com
+5V
Trim
NC
NC
Pin Pitch Tolerance ±0.35 mm
6
7.60
5
www.recom-international.com
July-2006
273
RP40-S_D_TE
Series
POWERLINE
DC/DC-Converter
Application of Synchronization
Converter 1
2
+ Vin
4
3
– Vin
1. The unit is capable of external synchronization from
an independent time base with a switching rate
between 200kHz and 215 kHz.
2. The amplitude of the synchronizing pulse train is
TTL compatible.
3. The duty cycle of the CLK should be 20% high and
80% low.
4. Synchronization is referenced to negative input
(–Vin).
+
Sync
–
Converter 2
2
4
3
Converter
2
+ Vin
+
1
Sync
3
– Vin
–
+
CTRL
–
ON/OFF
Control
CLK
2N7000
CLK Signal
80%
20%
External Output Trimming
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
[ ] for triple output trim
{ } for RP40-xx3.305DE only trim 3.3V / 5V
7(7) [9] {6}
Trim Up
6(8) [10] {8}
RU
6(8) [10] {8}
274
Trim Down
RD
5(5) [8] {5}
July-2006
www.recom-international.com
Features
●
●
●
●
●
●
●
●
●
2:1 Wide Input Voltage Range
40 Watts Output Power
1.6kVDC Isolation
UL Certified
Fixed Operating Frequency
Six-Sided Continuous Shield
Design Meet Safety Standard
Standard 50.8 x50.8x10.2mm Package
Efficiency to 90%
Selection Guide 12V, 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4)
Current
mA
Efficiency(5) Capacitive(6)
Load max.
%
µF
RP40-121.5SG
9-18
1.5
8000
1351
78
45000
RP40-121.8SG
9-18
1.8
8000
1579
80
37700
RP40-122.5SG
9-18
2.5
8000
2137
82
27000
RP40-123.3SG
9-18
3.3
8000
2750
84
21000
RP40-1205SG
9-18
5
8000
4065
86
13600
RP40-1212SG
9-18
12
3333
4065
86
2360
RP40-1215SG
9-18
15
2666
4015
87
1510
RP40-241.5SG
18-36
1.5
8000
649
81
45000
RP40-241.8SG
18-36
1.8
8000
759
83
37700
RP40-242.5SG
18-36
2.5
8000
1029
85
27000
RP40-243.3SG
18-36
3.3
8000
1325
87
21000
RP40-2405SG
18-36
5
8000
1961
89
13600
RP40-2412SG
18-36
12
3333
2048
88
2360
RP40-2415SG
18-36
15
2666
1985
89
1510
RP40-481.5SG
36-75
1.5
8000
321
82
45000
RP40-481.8SG
36-75
1.8
8000
375
84
37700
RP40-482.5SG
36-75
2.5
8000
508
86
27000
RP40-483.3SG
36-75
3.3
8000
655
88
21000
RP40-4805SG
36-75
5
8000
969
90
13600
RP40-4812SG
36-75
12
3333
1000
89
2360
RP40-4815SG
36-75
15
2666
992
89
1510
RP40-1212DG
9-18
±12
±1800
4444
85
±1200
RP40-1215DG
9-18
±15
±1400
4321
85
±750
RP40-2412DG
18-36
±12
±1800
2169
87
±1200
RP40-2415DG
18-36
±15
±1400
2108
87
±750
RP40-4812DG
36-75
±12
±1800
1084
87
±1200
RP40-4815DG
36-75
±15
±1400
1054
87
±750
POWERLINE
DC/DC-Converter
RP40S_D_TG
Series
40 Watt
Single, Dual,
Positive Dual &
Triple Output
UL-60950-1 Certified
for Triple Output continued on next page
Description
The RP40-xxxxG Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them
ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards.
www.recom-international.com
July-2006
275
POWERLINE
RP40-S_D_TG
Series
DC/DC-Converter
Selection Guide 12V, 24V and 48V Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
RP40-123.305DG
9-18
3.3 / 5
RP40-243.305DG
18-36
3.3 / 5
Input (4) Efficiency(5) Capacitive(6)
Current
Load max.
mA
%
µF
Output
Current
mA
4A / 4A (total 8A)(15) 3416
4A / 4A (total 8A)
(15)
4A / 4A (total 8A)
(15)
85
11000 / 6800
1689
86
11000 / 6800
823
88
11000 / 6800
RP40-483.305DG
36-75
3.3 / 5
RP40-123.312TG
9-18
3.3 / ±12
6000 / ±400
3063
84
13000 / ±330
RP40-123.315TG
9-18
3.3 / ±15
6000 / ±300
3000
84
13000 / ±110
RP40-120512TG
9-18
5 / ±12
6000 / ±400
4024
86
6800 / ±330
RP40-120515TG
9-18
5 / ±15
6000 / ±300
3963
86
6800 / ±110
RP40-243.312TG
18-36
3.3 / ±12
6000 / ±400
1512
85
13000 / ±330
RP40-243.315TG
18-36
3.3 / ±15
6000 / ±300
1481
85
13000 / ±110
RP40-240512TG
18-36
5 / ±12
6000 / ±400
1989
87
6800 / ±330
RP40-240515TG
18-36
5 / ±15
6000 / ±300
1958
87
6800 / ±110
RP40-483.312TG
36-75
3.3 / ±12
6000 / ±400
747
86
13000 / ±330
RP40-483.315TG
36-75
3.3 / ±15
6000 / ±300
732
86
13000 / ±110
RP40-480512TG
36-75
5 / ±12
6000 / ±400
982
88
6800 / ±330
RP40-480515TG
36-75
5 / ±15
6000 / ±300
967
88
6800 / ±110
Derating-Graph (Ambient Temperature)
RP40-4805SG
125
100
Output Power (%)
75
50
Natural Convection
25
0
-40 -25 -10 0
50 60
70 80 90 100
Ambient Temperature Range (°C)
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
276
July-2006
www.recom-international.com
RP40-S_D_TG
Series
POWERLINE
DC/DC-Converter
92
91
90
89
88
87
86
85
84
83
82
RP40-4805SG
RP40-4805SG
Efficiency VS Input Voltage
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
Typical Characteristics
36
42
48
54
60
66
72
75
94
92
90
88
86
84
82
80
75
70
65
1
2
3
4
5
6
7
8
Output Load (A)
Input Voltage (V)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Under Voltage Lockout
12V nominal input
24V nominal input
48V nominal input
12V input DC-DC ON
DC-DC OFF
24V input DC-DC ON
DC-DC OFF
48V input DC-DC ON
DC-DC OFF
Input Filter (see Note 13)
L-C Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (see Note 7)
( Positive logic )
Remote OFF input current
Output Power
Output Voltage Accuracy (full Load and nominal Vin)
Voltage Adjustability
Minimum Load
Line Regulation (low line, high line at full load)
9-18VDC
18-36VDC
36-75VDC
9VDC
8VDC
17.8VDC
16VDC
36VDC
34VDC
5V/ms max
36VDC
50VDC
100VDC
40mAp-p
DC-DC ON
DC-DC OFF
Nominal input
25ms typ.
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
2.5mA
Single & Dual
Triple Main
Auxiliary
40W max.
±1%
±1%
±5%
Single and Dual Positive
Dual and Triple
Single & Dual
±10%
0%
10% of full load
±0.5%
Triple Main
±1%
Triple Auxiliary
±5%
continued on next page
www.recom-international.com
July-2006
277
RP40-S_D_TG
Series
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Load Regulation (10% to 100% full load see Note 9 and 10)
Cross Regulation (Note 11)
Ripple and Noise (20MHz bandwith)
(Measured with a 1004pF/50V MLCC)
(see Note 12)
Single
Dual
Triple Main
Auxiliary
Triple Main
Dual / Triple Auxiliary
Single 1.5, 1.8, 2.5, 3.3, 5V
Single 12, 15V
Dual 12V
Dual 15V
RP40-xx3.305DG
RP40-xxxxxxTG
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±0.5%
±1%
±2%
±5%
±1%
±5%
50mVp-p
75mVp-p
120mVp-p
150mVp-p
100mVp-p
50 / 75mVp-p
±0.02%/°C max.
1.5, 1.8, 2.5, 3.3V
5V
12V
15V
Over Load Protection (% of full load at nominal Vin)
300µs
3.9V
6.2V
15V
18V
150% max.
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
1000pF max.
Operating Frequency (see Note 14)
Approved to Safety Standards
300kHz typ.
Single,Triple
Dual
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance (see Note 8)
UL 1950, EN60950
EN60950
100°C
Natural convection
Heat Sink with 20LFM
Heat Sink with 500LFM
Thermal Shock
-55°C to +105°C
9.2°C/Watt
8.5°C/Watt
2.8°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic FR4
Potting Material
Conducted Emissions (see Note 16)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
60g
Dimensions
50.8 x 50.8 x 10.2mm
1398 x 103 hours
MTBF (see Note 2)
278
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
July-2006
www.recom-international.com
RP40-S_D_TG
Series
POWERLINE
DC/DC-Converter
Notes :
1. Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +Vsense should be connected to its
corresponding +OUTPUT and likewise the sense should be connected to its corresponding -OUTPUT
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input.
8. Heat sink is optional and P/N: 7G-0026A.
9. The triple output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not
damage these devices,however they may not meet all listed specification.
10. Load regulation for triple output:
Main output(V1):10 to 100% with 10% to 100% balanced on auxiliaries.
Auxiliary outputs(V2 and V3):10% to 100% balanced on all outputs.
11.Cross regulation for triple output:
Main output 100% load, auxiliary 100%,other auxiliary25% to 100%.
Auxiliary outputs(V2 and V3):main output 100% load, auxiliary 100%, other auxiliary
25% to 100% or main output 25%,auxiliary 25%,other auxiliary 25% to 100%.
12.The models of RP40-XX3.305DG are specified with a 1uF ceramic output capacitors.
13.An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90m Ω.
14.Operating frequency for dual output: master (5Vo) 300KHz slave (3.3Vo) 500KHz.
15.Any condition of dual output (3.3V/5V) rated Iout current, not to exceed 8A of total output currents. The product safety approval pending.
16.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
50.80
10.20
0.70
dia.
1.0
5.6
Pin Connections
45.70
4
5
5.10
1
2
Bottom View
15.30
28.20
3
6
7
12.70
2.5 5.10
7.6
Pin #
Single
1
+Vin
2
-Vin
3
CTRL
4
NC
5
-Sense (Note1)
6
+Sense (Note1)
7
+Vout
8
-Vout
9
Trim
NC = No Connection
Dual
+Vin
-Vin
CTRL
No Pin
+Vout
Com
Com
-Vout
Trim
Triple
Dual Positive
+Vin
+Vin
-Vin
-Vin
CTRL
CTRL
+Aux
3.3V
Com
3.3V RTN(Com)
-Aux
NC
+Vout
NC
-Vout(Com)
5V
NC
5V RTN(Com)
Pin Pitch Tolerance ±0.35 mm
15.20
20.30
8
External Output Trimming
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
9
8(8)
Trim Up
9(9)
RD
RU
9(9)
www.recom-international.com
July-2006
Trim Down
7(5)
279
Features
Regulated
Converters
●
●
●
●
●
●
●
●
4:1 Wide Input Voltage Range
40 Watts Regulated Output Power
1.6kVDC Isolation
Over Current and Over Voltage Protection
Six-Sided Shield
No Derating to 55°C
Standard 2” x2” Package and Pinning
Efficiency to 86%
Selection Guide 24V and 48V Wide Input Types
Part Number
Input
Range
VDC
Output
Voltage
VDC
Output
Current
mA
Input (4,5)
Current
mA
Efficiency(6) Capacitive(7)
Load max.
%
µF
RP40-243.3SGW
9-36
3.3
10000
80/1677
86
25750
RP40-2405SGW
9-36
5
8000
100/1984
88
13600
RP40-2412SGW
9-36
12
3333
100/1984
88
2360
RP40-2415SGW
9-36
15
2666
110/1984
88
1510
RP40-483.3SGW
18-75
3.3
10000
50/838
86
25750
RP40-4805SGW
18-75
5
8000
50/992
88
13600
RP40-4812SGW
18-75
12
3333
70/992
88
2360
RP40-4815SGW
18-75
15
2666
70/992
88
1510
RP40-2412DGW
9-36
±12
±1667
30/1984
88
±1200
RP40-2415DGW
9-36
±15
±1333
30/1984
88
±750
RP40-4812DGW
18-75
±12
±1667
20/992
88
±1200
RP40-4815DGW
18-75
±15
±1333
20/992
88
±750
POWERLINE
DC/DC-Converter
RP40S_DGW
Series
40 Watt
2” x 2”
Single & Dual
Output
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard
* add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Derating Graph (Ambient Temperature)
RP40-4805SGW
125
100
1=75Vin, 2=18Vin, 3=48Vin
1 2 3
Output Power (%)
75
50
Nom Vin
Natural Convection
25
0
-40 -25 -10 0 40 50 60 70 80 90 100 110
55
Ambient Temperature Range (°C)
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at [email protected]
280
November-2006
www.recom-international.com
POWERLINE
RP40-S_DGW
Series
DC/DC-Converter
Derating Graph (Ambient Temperature)
RP40-4805SGW
125
1=Natural Convection, 2=200LFM, 3=300LFM,
4=400LFM, 5=500LFM
1
100
Output Power (%)
75
50
2
3 45
Natural Convection
25
0
-40 -25 -10 0 40 50 60 70 80 90 100 110
55
Ambient Temperature Range (°C)
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
Undervoltage Protection
24V nominal input
9-36VDC
48V nominal input
18-75VDC
24V Input
48V Input
DC-DC ON = 9VDC, DC-DC OFF = 8VDC
DC-DC ON = 18VDC, DC-DC OFF = 16VDC
Input Filter
Pi Type
Input Voltage Variation dv/dt
(Complies with ETS300 132 part 4.4)
5V/ms max
Input Surge Voltage (100 ms max.)
24V Input
50VDC
48V Input
100VDC
Input Reflected Ripple (nominal Vin and full load)(see Note 3)
20mAp-p
Start Up Time (nominal Vin and constant resistor load)
20ms typ.
Remote ON/OFF (see Note 7)
(Positiv logic)
(Negativ logic)
Remote OFF input current
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Nominal input
Output Power
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
24Vin: 10mA
48Vin: 5mA
40W max.
Output Voltage Accuracy (full Load and nominal Vin)
±1%
continued on next page
www.recom-international.com
November-2006
281
RP40-S_DGW
Series
POWERLINE
DC/DC-Converter
Specifications, cont. (typical at nominal input and 25°C unless otherwise noted)
Voltage Adjustability (see Note 1)
Load Regulation (0% to 100% full load) (see Notes 9, 10)
Line Regulation (low line, high line at full load)
Cross Regulation (see Note 11)
Temperature Coefficient
Ripple and Noise (20MHz bandwith)
±10%
Single
Dual
±0.5%
±1%
Dual
±0.2%
±5%
Single 3.3, 5V
Single 12, 15V
Dual 12V
Dual 15V
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
±0.02%/°C max.
50mVp-p
75mVp-p
120mVp-p
150mVp-p
250µs
3.3 Vout
5 Vout
12 Vout / ±12 Vout
3.9V
6.2V
15V / ±15V
15 Vout / ±15 Vout
18V / ±18V
150% max.
Over Load Protection (% of full load at nominal Vin)
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
1500pF max.
Operating Frequency
300kHz typ.
Operating Temperature Range
-40°C to +55°C(without derating)
+55°C to +105°C(with derating)
Maximum Case Temperature
Storage Temperature Range
Over Temperature Protection
Thermal Impedance (see Note 8)
105°C
Without Heat-Sink
With Heat-Sink
Thermal Shock
-55°C to +125°C
115°C typ.
9.2°C/Watt
7.6°C/Watt
MIL-STD-810D
Vibration
10-55Hz, 10G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic FR4
Potting Material
Conducted Emissions (see Notes 12, 14)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Epoxy (UL94-V0)
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Weight
60g
Dimensions
MTBF (see Note 2)
51.3 x 51.3 x 10.2mm
Bellcore TR-NWT-00332
MIL-STD-217F
282
Class A
Class A
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
November-2006
1105 x 103 hours
151 x 103 hours
www.recom-international.com
RP40-S_DGW
Series
POWERLINE
DC/DC-Converter
Notes :
1. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +sense should be
connected to its corresponding +OUTPUT and likewise the -sense should be connected to its corresponding –OUTPUT.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistive load.
7. The ON/OFF control function. There are positive logic (standard) and negative logic (option). The pin voltage is referenced to negative input
To order negative logic ON/OFF control add the suffix-N (Ex: RP40-4805SGW-N).
8. Heat sink is optional and P/N: 7G-0026A.
9. The dual output required a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage
these devices, however they may not meet all listed specification.
10. Load regulation for dual output : Min load to 100% load balanced on all outputs.
11.Cross regulation for dual output : asymmetrical load 25% / 100% FL.
12..The RP40-GW series required external filter to meets EN55022 class A.
13.Output ripple and noise measured with a 0.1µF/50V MLCC.
14.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
51.30
51.30
10.20
0.70
dia.
1.0
5.6
Pin Connections
45.70
4
5.10
1
2
Bottom View
15.30
28.20
3
5
6
2.5 5.10
Pin #
1
2
3
4
5
6
7
8
Single
+Vin
-Vin
CTRL
-SENSE (Note 1)
+SENSE (Note 2)
+Vout
-Vout
TRIM
Dual
+Vin
-Vin
CTRL
+Vout
Com
Com
-Vout
TRIM
Pin Pitch Tolerance ±0.35 mm
7.6
15.20
20.30
7
External Output Trimming
8
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
7(7)
Trim Up
8(8)
RD
RU
8(8)
www.recom-international.com
November-2006
Trim Down
6(4)
283
AC/DC POWERLINE - CONTENTS
New Product Line for 2006
Single Output Models
Series
Isolation
Power
Input Voltages
Output Voltages
Case
Page
(kVAC)
(Watts)
(VAC)
(VDC)
Dimensions mm
No.
RAC5-SA
3
5
90 - 264
3.3, 5, 12, 15, 24
55.00 x 45.00 x 20.50
285
RAC5-SB
3
5
90 - 264
3.3, 5, 12, 15, 24
50.80 x 25.40 x 15.16
287
RAC10-SA
3
10
90 - 264
3.3, 5, 12, 15, 24
64.00 x 45.00 x 21.50
289
RAC10-SB
3
10
90 - 264
3.3, 5, 12, 15, 24
52.40 x 27.20 x 23.50
291
RAC15-SA
3
15
90 - 264
5, 12, 15, 24
74.00 x 54.00 x 22.00
293
RAC30-SA
3
30
90 - 264
3.3, 5, 12, 15, 24
89.00 x 63.50 x 25.00
296
Dual Output Models
Series
Isolation
Power
Input Voltages
Output Voltages
Case
Page
(kVAC)
(Watts)
(VAC)
(VDC)
Dimensions mm
No.
RAC5-DA
3
5
90 - 264
±5, ±12, ±15
55.00 x 45.00 x 20.50
285
RAC10-DA
3
10
90 - 264
±5, ±12, ±15
64.00 x 45.00 x 21.50
289
RAC15-DA
3
15
90 - 264
±5, ±12, ±15
74.00 x 54.00 x 22.00
293
RAC30-DA
3
30
90 - 264
±5, ±12, ±15
89.00 x 63.50 x 25.00
296
RAC30-0512DA
3
30
90 - 264
5 / 12
89.00 x 63.50 x 25.00
296
Page
Triple Output Models
Series
Isolation
Power
Input Voltages
Output Voltages
Case
(kVAC)
(Watts)
(VAC)
(VDC)
Dimensions mm
No.
RAC15-TA
3
15
90 - 264
5 / ±12, 5 / ±15
74.00 x 54.00 x 22.00
293
RAC30-TA
3
30
90 - 264
5 / ±12, 5 / ±15
89.00 x 63.50 x 25.00
296
DIN Rail Mounting Modules
284
July-2006
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
AC-DC Power Supply
5 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC05S_DA
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC05-3.3SA
90-264
3.3
1500
70
RAC05-05SA
90-264
5
1000
75
RAC05-12SA
90-264
12
416
75
RAC05-15SA
90-264
15
333
75
RAC05-24SA
90-264
24
200
76
RAC05-05DA
90-264
±5
±500
72
RAC05-12DA
90-264
±12
±200
75
RAC05-15DA
90-264
±15
±160
75
5 Watt
Single & Dual
Output
(%)
* add suffix "-DIN for DIN Rail mounting module (see seperate datasheet)
Description
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals.
Specifications
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
5 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
110mA max. (115VAC) / 70mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
0.75mA max.
Output Voltage Accuracy (full load)
±2%
Line Voltage Regulation (low line, high line at full load)
±0.3% typ.
Load Voltage Regulation ( 5% to 100% full load )
±0.5% typ.
0.5% Vout + 50mVp-p max.
Operating Frequency
100kHz typ.
Efficiency at full Load
see table
Isolation Voltage (input to output)
Temperature Coefficient
Isolation Resistance
125
±0.02%/°C typ.
100
Continuous, Automatic Restart
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Epoxy with Fibreglass (UL94V-0)
Package Weight
80g
DIN Rail Module
www.recom-international.com
(Ambient Temperature)
3000VAC min.
100 MΩ max.
Short Circuit Protection
Derating Graph
Output Power (%)
Output Ripple and Noise (20MHz limited)
MTBF (+25°C)
UL-60950 Certified
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
140g
using MIL-HDBK-217F
300 x 103 hours
12-February-2007
285
POWERLINE
RAC05-S_DA
Series
AC/DC-Converter
Simplified Schematics
Single
+Vout
L
Line Filter
N
Rectifier
-Vout
FG
PWM
Controller
Isolation
Reference
& Error AMP
+Vout
Dual
Com
L
N
Line Filter
Rectifier
-Vout
FG
PWM
Controller
Isolation
Reference
& Error AMP
Package Style and Pinning
55.00
3rd angle
projection
45.00
20.5
10.0
1.0
47.00
Pin ConnectionsPin #
3
L
+
17.5
6
10.0
2 N
Bottom View
Com
5
10.0
17.5
-
4
Single Out
Dual Out
1
FG
FG
2
VAC in (N)
VAC in (N)
3
VAC in (L)
VAC in (L)
4
-VDC out
-VDC out
5
No Pin
6
+VDC out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
1 FG
Com
+VDC out
See DIN Rail Modules for DIN rail mounting option
286
12-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
Very Compact AC-DC Power Supply
5 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC05-SB
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC05-3.3SB
90-264
3.3
1250
65
RAC05-05SB
90-264
5
1000
72
RAC05-12SB
90-264
12
420
73
RAC05-15SB
90-264
15
333
75
RAC05-24SB
90-264
24
230
76
5 Watt
Single
Output
(%)
* add suffix "-DIN for DIN Rail mounting module (see seperate datasheet)
Description
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals.
Specifications
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
5 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
110mA max. (115VAC) / 70mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
0.75mA max.
Output Voltage Accuracy (Full load)
±2%
Line Voltage Regulation (low line, high line at full load)
±0.3% typ.
Load Voltage Regulation ( 5% to 100% full load )
±0.5% typ.
Output Ripple and Noise (20MHz limited)
0.5% Vout + 50mVp-p max.
Operating Frequency
132kHz typ.
Efficiency at Full Load
(Ambient Temperature)
Isolation Resistance
3000VAC min.
125
±0.02%/°C typ.
100
100 MΩ max.
Short Circuit Protection
Continuous, Automatic Restart
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Epoxy with Fibreglass (UL94V-0)
Package Weight
30g
DIN Rail Module
Output Power (%)
Temperature Coefficient
www.recom-international.com
Derating Graph
see table
Isolation Voltage (input to output)
MTBF (+25°C)
UL-60950 Certified
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
67g
using MIL-HDBK-217F
360 x 103 hours
12-February-2007
287
POWERLINE
RAC05-SB
Series
AC/DC-Converter
Typical Application
+Vout DC
N
C1
0.1uF
50V
RAC05-12SB
L
C2
47uF
50V
Load
-Vout DC
Simplified Schematic
L
+Vout
Rectifier
-Vout
N
PWM
Controller
Isolation
Reference
& Error AMP
Package Style and Pinning
50.80
25.40
3rd angle
projection
15.16
10.0
Pin Connections
1.0
45.72
Pin #
20.32
1
Recommended Footprint Details
12.65
10.16
2
3
1
Bottom View
4
2.54
Top View
Single Out
VAC in (N)
2
VAC in (L)
3
+VDC out
4
-VDC out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
4
10.16
10.16
1
2
3
2.54
1.2ø+0.2/–0.1
See DIN Rail Modules for DIN rail mounting option
288
12-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
Compact AC-DC Power Supply
10 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC10S_DA
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC10-3.3SA
90-264
3.3
3000
65
RAC10-05SA
90-264
5
2000
71
RAC10-12SA
90-264
12
833
74
RAC10-15SA
90-264
15
666
71
RAC10-24SA
90-264
24
426
74
RAC10-05DA
90-264
±5
±800
71
RAC10-12DA
90-264
±12
±380
75
RAC10-15DA
90-264
±15
±300
72
10 Watt
Single & Dual
Output
(%)
* add suffix "-DIN for DIN Rail mounting module (see seperate datasheet)
Description
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals.
Specifications
UL-60950 Certified
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
10 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
200mA max. (115VAC) / 130mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
0.75mA max.
Output Voltage Accuracy (Full load)
±2%
Line Voltage Regulation (low line, high line at full load)
±0.3% typ.
Load Voltage Regulation ( 5% to 100% full load )
±0.5% typ.
Output Ripple and Noise (20MHz limited)
0.5% Vout + 50mVp-p max.
Operating Frequency
100kHz typ.
Efficiency at Full Load
3000VAC min.
125
±0.02%/°C typ.
100
Isolation Resistance
100 MΩ min.
Short Circuit Protection
Continuous, Automatic Restart
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Epoxy with Fibreglass (UL94V-0)
Package Weight
100g
DIN Rail Module
Output Power (%)
Temperature Coefficient
www.recom-international.com
(Ambient Temperature)
see table
Isolation Voltage (input to output)
MTBF (+25°C)
Derating Graph
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
180g
using MIL-HDBK-217F
250 x
12-February-2007
103
hours
289
RAC10-S_DA
Series
POWERLINE
AC/DC-Converter
Typical Application
+Vout DC
N
1.5A
Slo
Blo
C2
47uF
50V
C1
0.1uF
50V
RAC10-12SA
L
Load
-Vout DC
Simplified Schematics
L
+Vout
L
+Vout
Filter
Rectifier
Filter
-Vout
N
Rectifier
Com
-Vout
N
FG
FG
Overcurrent
Protection
PWM
Controller
Reference
& Error AMP
Isolation
Overcurrent
Protection
PWM
Controller
Isolation
Reference
& Error AMP
Package Style and Pinning
3rd angle
projection
64.00
45.00
21.50
10.00
1.0
54.00
Pin ConnectionsPin #
4.0
22.50
17.5
6.0
3
6
2
17.5
Bottom View
5
4
10.0
10.0
Single Out
Dual Out
1
FG
FG
2
VAC in (N)
VAC in (N)
3
VAC in (L)
VAC in (L)
4
-VDC out
-VDC out
5
No Pin
Com
6
+VDC out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
1
+VDC out
See DIN Rail Modules for DIN rail mounting option
290
12-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
Compact AC-DC Power Supply
10 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC10-SB
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC10-3.3SB
90-264
3.3
2500
70
RAC10-05SB
90-264
5
2000
72
RAC10-12SB
90-264
12
833
76
RAC10-15SB
90-264
15
667
75
RAC10-24SB
90-264
24
417
72
10 Watt
Single
Output
(%)
* add suffix "-DIN for DIN Rail mounting module (see seperate datasheet)
Description
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals. Pin compatible with RAC5-SB Models.
Specifications
UL-60950 Certified
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
10 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
220mA max. (115VAC) / 150mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
14mA max.
Output Voltage Accuracy (Full load)
±2%
Line Voltage Regulation (low line, high line at full load)
±0.3% typ.
Load Voltage Regulation ( 5% to 100% full load )
±0.5% typ.
Output Ripple and Noise (20MHz limited)
0.5% Vout + 50mVp-p max.
Operating Frequency
125kHz typ.
Efficiency at Full Load
3000VAC min.
125
±0.02%/°C typ.
100
Isolation Resistance
100 MΩ min.
Short Circuit Protection
Continuous, Automatic Restart
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Epoxy with Fibreglass (UL94V-0)
Package Weight
54g
DIN Rail Module
Output Power (%)
Temperature Coefficient
www.recom-international.com
(Ambient Temperature)
see table
Isolation Voltage (input to output)
MTBF (+25°C)
Derating Graph
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
91g
using MIL-HDBK-217F
330 x 103 hours
12-February-2007
291
RAC10-SB
Series
POWERLINE
AC/DC-Converter
Typical Application
+Vout DC
N
1.5A
Slo
Blo
C2
47uF
50V
C1
0.1uF
50V
RAC10-12SB
L
Load
-Vout DC
Simplified Schematic
L
+Vout
Rectifier
-Vout
N
PWM
Controller
Isolation
Reference
& Error AMP
Package Style and Pinning
52.40
3rd angle
projection
27.20
23.50
Pin Connections
10.0
Pin #
1.0
45.72
1
20.32
2
4
2.54
2
VAC in (L)
3
+VDC out
3
1
Bottom View
VAC in (N)
4
-VDC out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Recommended Footprint Details
13.60
10.16
Single Out
Top View
4
10.16
10.16
1
2
3
2.54
1.2ø+0.2/–0.1
See DIN Rail Modules for DIN rail mounting option
292
12-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
Compact AC-DC Power Supply
15 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC15S_D_TA
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC15-05SA
90-264
5
3000
70
RAC15-12SA
90-264
12
1250
73
RAC15-15SA
90-264
15
1000
73
RAC15-24SA
90-264
24
625
77
RAC15-05DA
90-264
±5
±1500
71
RAC15-12DA
90-264
±12
±650
76
RAC15-15DA
90-264
±15
±500
65
RAC15-0512TA
90-264
5/±12
2000/±200
68
RAC15-0515TA
90-264
5/±15
2000/±150
68
15 Watt Single,
Dual & Triple
Output
(%)
* add suffix "-DIN for DIN Rail mounting module (see seperate datasheet)
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety
Approvals.
Specifications
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
15 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
280mA max. (115VAC) / 170mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
Output Voltage Accuracy (Full load)
Line Voltage Regul. (low line, high line at full load)
Load Voltage Regulation (5% to 100% full load)
0.75mA max.
±2%
±0.5% typ.
±0.5% typ.
±1%/±0.5% typ.
±0.5% typ.
±3% typ.
±2%/±5% typ.
Single
Dual
Triple
Single
Dual
Triple
Output Ripple and Noise (20MHz limited)
0.5% Vout + 50mVp-p max.
Operating Frequency
Derating Graph
(Ambient Temperature)
100kHz typ.
Efficiency at Full Load
see table
Isolation Voltage (input to output)
125
3000VAC min.
Temperature Coefficient
100
±0.02%/°C typ.
Isolation Resistance
100 MΩ max.
Short Circuit Protection
Continuous, Automatic Restart
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Package Weight
Epoxy with Fibreglass (UL94V-0)
140g
DIN Rail Module
200g
MTBF (+25°C)
using MIL-HDBK-217F
www.recom-international.com
UL-60950 Certified
Output Power (%)
Description
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
200 x 103 hours
12-February-2007
293
POWERLINE
RAC15-S_D_TA
Series
AC/DC-Converter
Simplified Schematics
Single
L
+Vout
Filter
Rectifier
-Vout
N
FG
Overcurrent
Protection
PWM
Controller
Isolation
Reference
& Error AMP
L
+Vout
Dual
Filter
Rectifier
Com
-Vout
N
FG
Overcurrent
Protection
PWM
Controller
Isolation
Reference
& Error AMP
+5Vout
Triple
+5V Rtn
+Vout
L
N
Line Filter
Com
Rectifier
-Vout
FG
Overcurrent
Protection
294
PWM
Controller
Isolation
12-February-2007
Reference
& Error AMP
www.recom-international.com
RAC15-S_D_TA
Series
POWERLINE
AC/DC-Converter
Typical Application
+Vout DC
N
1.5A
Slo
Blo
C2
47uF
50V
C1
0.1uF
50V
RAC15-12SA
L
Load
-Vout DC
Package Style and Pinning
3rd angle
projection
54.00
74.00
22.00
10.0
1.0
62.00
Pin Connections
Pin #
3
8
27.0
20.0
7
8.5
11.5
2
Bottom View
6
11.5
20.0
5
1
8.5
4
Single Out
Dual Out
Triple Out
1
FG
FG
FG
2
VAC in (N)
VAC in (N)
VAC in (N)
3
VAC in (L)
VAC in (L)
VAC in (L)
4
No Pin
No Pin
-VDC Out
5
-VDC Out
-VDC Out
Com
6
No Pin
Com
+ VDC Out
7
+ VDC Out
+ VDC Out
+ 5V Rtn (Com)
8
No Pin
No Pin
+ 5V Out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
See DIN Rail Modules for DIN rail mounting option
www.recom-international.com
12-February-2007
295
Features
Regulated
Converters
●
●
●
●
●
●
●
POWERLINE
AC-DC Power Supply
30 Watt PCB Mount Package
Universal Input Voltage Range
3000VAC Isolation
Low Output Ripple and Noise
Short Circuit Protected
UL Approved
AC/DC-Converter
RAC30S_D_TA
Series
Selection Guide
Part
Number
Input
Range
(VAC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
RAC30-3.3SA
90-264
3.3
6000
70
RAC30-05SA
90-264
5
6000
75
RAC30-12SA
90-264
12
2500
80
RAC30-15SA
90-264
15
2000
80
RAC30-24SA
90-264
24
1250
77
RAC30-05DA
90-264
±5
±3000
73
RAC30-12DA
90-264
±12
±1250
78
RAC30-15DA
90-264
±15
±1000
76
RAC30-0512DA
90-264
5/12
3000/1250
77
RAC30-0512TA
90-264
5/±12
3000/±630
77
RAC30-0515TA
90-264
5/±15
3000/±500
76
30 Watt
Single, Dual &
Triple Output
(%)
Description
UL-60950 Certified
Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals.
Specifications
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
90-264VAC or 120-370VDC
Rated Power
30 Watts max.
Input Frequency Range (for AC Input)
47-440Hz
Input Current (full load)
520mA max. (115VAC) / 320mA max. (230VAC)
Inrush Current (<2ms)
10A max. (115VAC) / 20A max. (230VAC)
Leakage Current
0.75mA max.
Output Voltage Accuracy (Full load)
Line Voltage Regul. (low line, high line at full load)Single
Dual
Triple (incl. 0512DA)
Load Voltage Regulation (5% to 100% full load)
Single
Dual
Triple (incl. 0512DA)
Minimum Load
Single
Dual
Triple (incl. 0512DA)
Output Ripple and Noise (20MHz limited)
±2%
±1% typ.
±1% typ.
±1%/±5% typ.
±1% typ.
±3% typ.
±2%/±6% typ.
5%
3%
20%
0.5% Vout + 50mVp-p max.
Operating Frequency
100kHz typ.
Efficiency at Full Load
Isolation Voltage (input to output)
Temperature Coefficient
Isolation Resistance
Short Circuit Protection
see table
3000VAC min.
±0.02%/°C typ.
100 MΩ max.
Derating Graph
(Ambient Temperature)
125
100
Output Power (%)
Input Voltage Range
Natural Convection
75
50
25
0
-25
-10 0
50
60 70 80 90 100
Ambient Temperature Range (°C)
Continuous, Automatic Restart
continued on next page
296
12-February-2007
www.recom-international.com
POWERLINE
RAC30-S_D_TA
Series
AC/DC-Converter
Specifications continued
( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified )
Operating Temperature Range (free air convection, with derating)
-25°C to +70°C
Storage Temperature Range
-40°C to +85°C
Humidity
95% RH max.
Case Material
Epoxy with Fibreglass (UL94V-0)
Package Weight
220g
MTBF (+25°C)
using MIL-HDBK-217F
200 x
103
hours
Simplified Schematics
L
+Vout
Single
Filter
Rectifier
-Vout
N
Overcurrent
Protection
PWM
Controller
Isolation
Reference
& Error AMP
L
+Vout
Dual
Filter
Rectifier
Com
-Vout
N
Overcurrent
Protection
PWM
Controller
Isolation
Reference
& Error AMP
+5Vout
+5V Rtn
Triple
+Vout
L
Line Filter
Com
Rectifier
-Vout
N
Overcurrent
Protection
www.recom-international.com
PWM
Controller
Isolation
12-February-2007
Reference
& Error AMP
297
RAC30-S_D_TA
Series
POWERLINE
AC/DC-Converter
Typical Application
+Vout DC
N
1.5A
Slo
Blo
L
C2
47uF
50V
C1
0.1uF
50V
RAC30-12SA
Load
-Vout DC
Package Style and Pinning
3rd angle
projection
89.00
63.50
25.00
10.0
1.0
81.30
Pin Connections
7
2
15.24
6
12.70
55.88
Bottom View
5
12.70
4
15.24
1
298
3
Pin #
Single Out
Dual Out
0512DA
Triple Out
1
VAC in (N)
VAC in (N)
VAC in (N)
VAC in (N)
2
VAC in (L)
VAC in (L)
VAC in (L)
VAC in (L)
3
+ VDC Out
+VDC Out
+12V Out
+ VDC Out
4
No Pin
No Pin
+5V Out
+5V Out
5
-VDC Out
Com
+12V Rtn
Com
6
No Pin
No Pin
+5V Rtn
+5V Rtn (Com)
7
NC
-VDC Out
No Pin
-VDC Out
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
12-February-2007
www.recom-international.com
Features
Regulated
Converters
●
●
●
●
●
POWERLINE
Fits Standard DIN Rails
Complete Pre-Tested Modules
Screw Terminal Inputs and Outputs
Indicator LED
UL Approved
AC/DC-Converter
RAC Series
DIN Rail
Modules
DIN Rail Mount for RAC05-SB and RAC10-SB series
79.0
AC(N)
A C ( L)
+Vout
35.0
-Vout
For all 5 Watt
to 15 Watt
AC/DC
Converters
LED
RAC05-XXSB
30.0
43.0
Description
DIN-rail mounting adapters include monitoring LED and screw terminal connectors,
making them ideal for electrical cabinet use.
RAC10-XXSB
38.0
51.0
DIN Rail Mount for RAC05-S_DA Series
88.0
Screw Terminals- Single
FG
AC (N)
AC (L)
T6
T7
T8
58.0
LED
Terminal #
Out
6
-VDC Out
7
NC
8
+VDC Out
Screw Terminals- Dual
Terminal #
6
Out
-VDC Out
7
Com
8
+VDC Out
48.0
www.recom-international.com
12-February-2007
299
POWERLINE
DIN Rail
AC/DC-Converter
DIN Rail Mount for RAC10-S_DA Series
88.0
Screw Terminals- Single
Terminal #
LED
FG
AC (N)
AC (L)
6
+VDC Out
7
NC
8
-VDC Out
81.0
T8
T7
T6
Out
Screw Terminals- Dual
Terminal #
6
Out
+VDC Out
7
Com
8
-VDC Out
48.0
DIN Rail Mount for RAC15-S_D_TA Series
Screw Terminals- Single
FG
AC (N)
AC (L)
LED
T10
T9
T8
T7
T6
91.0
86.0
Terminal #
Out
6
NC
7
-VDC Out
8
NC
9
+ VDC Out
10
NC
Screw Terminals- Dual
Terminal #
Out
6
NC
7
-VDC Out
8
Com
9
+ VDC Out
10
NC
Screw Terminals- Triple
Terminal #
47.0
300
12-February-2007
Out
6
-VDC Out
7
Com
8
+ VDC Out
9
+5V Rtn
10
+ 5V Out
www.recom-international.com
DC-DC Converter Applications
Content
●
Terminology
Long Distance Supply Lines
Input Range
LCD Display Bias
Load Regulation
EIA-232 Interface
Line Voltage Regulation
Output Voltage Accuracy
Input and Output Ripple and Noise
●
Input to Output Isolation
Temperature Drift
3V/5V Logic Mixed Supply Rails
●
Input Voltage Range
Isolated Data Acquisition System
●
PI Filter
●
Output Voltage Accuracy
●
Voltage Balance
●
Line Regulations
●
Load Regulation
●
Efficiency
●
Switching Frequency
●
Output Ripple and Noise
●
Output Ripple and Noise
(continued)
●
Transient Recovery Time
●
Current Limiting
●
Fold Back Current Limiting
●
Isolation
●
Break-Down Voltage
●
Temperature Coefficient
●
Ambient Temperature
●
Operating Temperature Range
Component Alignment
●
Storage Temperature Range
Solder Pad Design
●
Output Voltage Trimming
EMC Considerations
Line Spectra of DC-DC Converters
Isolation Capacitance
Calculation of Heatsinks
General Test Set-Up
Shielding
No Load Power Consumption
Operating Temperature Range
●
Line Impedance
Stabilisation Network (LISN)
Switching Frequency
Noise
EMC Filter Suggestion
Interpretation of DC-DC Converter EMC
Data
Conducted and Radiated Emissions
Efficiency at FulI Load
Mean Time Between Failure (MTBF)
●
Power Supply Considerations
Insulation Resistance
●
Temperature Performance
of DC-DC Converters
●
Transfer Moulded
(SMD) DC-DC Converters
Production Guideline Application Note
Component Materials
●
Isolation
Isolation Voltage vs. Rated Working
Voltage
Component Placement
●
Isolation mode in IGBT Driver Circuits
●
Connecting DC-DC Converters in Series
Solder Reflow Profile
●
Connecting DC-DC Converters in Parallel
Recommended Solder Reflow Profile
●
Filtering
Adhesive Requirements
Output Filtering Calculation
Powerline – Definitions and Testing
Adhesive Placement
●
Limiting Inrush Current
Cleaning
●
Maximum Output Capacitance
Vapour Phase Reflow Soldering
●
Settling Time
●
Isolation Capacitance
and Leakage Current
●
Application Examples
Overload Protection
Input Voltage Drop-Out (brown-outs)
No Load Over Voltage Lock-Out
www.recom-international.com
July-2006
301
DC-DC Converter Applications
Terminology
The data sheet specification for DC-DC converters contains a large quantity of information. This terminology is aimed at ensuring that the user can interpret the data provided correctly and obtain the necessary
information for their circuit application.
Input Range
The range of input voltage that the device
can tolerate and maintain functional performance over the Operating Temperature
Range at full load.
Load Regulation
The change in output voltage over the specified change in output load. Usually specified as a percentage of the nominal output
voltage, for example, if a 1V change in output voltage is measured on a 12V output
device, load voltage regulation is 8.3%. For
unregulated devices the load voltage regulation is specified over the load range from
10% to 100% of full load.
Line Voltage Regulation
The change in output voltage for a given
change in input voltage, expressed as percentages. For example, assume a 12V input, 5V output device exhibited a 0.5V
change at the output for a 1.2V change at
the input, line regulation would be 1 %/1%.
Output Voltage Accuracy
The proximity of the output voltage to the
specified nominal value. This is given as a
tolerance envelope for unregulated devices
with the nominal input voltage applied. For
example, a 5V specified output device at
100% load may exhibit a measured output
voltage of 4.75V, i.e. a voltage accuracy of
–5%).
Input and Output Ripple and Noise
The amount of voltage drop at the input, or
output between switching cycles. The value
of voltage ripple is a measure of the storage
ability of the filter capacitors. The values
given in the datasheets include the higher
frequency Noise interference superimposed
on the ripple due to switching spikes.The
measurement is limited to 20MHz
Bandwidth.
Input to Output Isolation
The dielectric breakdown strength test between input and output circuits. This is the
isolation voltage the device is capable of
withstanding for a specified time, usually 1 second (for more details see chapter “Isolation
Voltage vs. Rated Working Voltage”).
302
Insulation Resistance
The resistance between input and output circuits. This is usually measured at 500V DC
isolation voltage.
The equation for the hybrid model is then
given by:
λ = ∑ (NC λC) (1 + 0.2πE) πL πF πQ
(failures in 106 hours)
Efficiency at FulI Load
The ratio of power delivered from the device
to power supplied to the device when the
part is operating under 100% load conditions at 25°C.
The MTBF figure is the reciprocal of this value.
In the data sheets, all figures for MTBF are
given for the ground benign (GB) environment (πE = 0.5); this is considered the most
appropriate for the majority of applications
in which these devices are likely to be used.
However, this is not the only operating environment possible, hence those users wishing to incorporate these devices into a
more severe environment can calculate the
predicted MTBF from the following data.
The MIL-HDBK-217F has military environments specified, hence some interpretation
of these is required to apply them to standard commercial environments. Table 1 gives
approximate cross references from MILHDBK-217F descriptions to close commercial equivalents. Please note that these are
not implied by MIL-HDBK-217F, but are our
interpretation. Also we have reduced the
number of environments from 14 to 6,
which are most appropriate to commercial
applications. For a more detailed understanding of the environments quoted and the
hybrid model, it is recommended that a full
copy of MIL-HDBK-217F is obtained.
It is interesting to note that space flight and
ground benign have the same environment
factors. It could be suggested that the act of
achieving space flight should be the determining environmental factor (i.e. missile launch).
The hybrid model equation can therefore be
rewritten for any given hybrid, at a fixed
temperature, so that the environmental factor is the only variable:
λ = k (1 + 0.2 πE)
Temperature Drift
The change in voltage, expressed as a percentage of the nominal, per degree change in
ambient temperature. This parameter is related to several other temperature dependent
parameters, mainly internal component drift.
Switching Frequency
The nominal frequency of operation of the
switching circuit inside the DC-DC converter. The ripple observed on the input and
output pins is usually twice the switching
frequency, due to full wave rectification and
the push-pull configuration of the driver circuit.
No Load Power Consumption
This is a measure of the switching circuits
power cunsumption; it is determined with
zero output load and is a limiting factor for
the total efficiency of the device.
Isolation Capacitance
The input to output coupling capacitance.
This is not actually a capacitor, but the parasitic capacitive coupling between the transformer primary and secondary windings.
Isolation capacitance is typically measured
at 1 MHz to reduce the possibility of the onboard filter capacitors affecting the results.
Mean Time Between Failure (MTBF)
RECOM uses MIL-HDBK-217F standard for
calculation of MTBF values for +25°C as
well as for max. operating temperature and
100% load. When comparing MTBF values
with other vendor's products, please take
into account the different conditions and
standards i.e. MIL-HDBK-217E is not as severe
and therefore values shown will be higher than
those shown by RECOM. (1000 x 10³ hours
=1000000 hours = 114 years!)
These figures are calculated expected device lifetime figures using the hybrid circuit
model of MIL-HDBK-217F. POWERLINE converters also can use BELLCORE TR-NWT000332 for calculation of MTBF. The hybrid
model has various accelerating factors for
operating environment (πE), maturity (πL),
screening (πQ), hybrid function (πF) and a
The MTBF values for other environment factors can therefore be calculated from the
ground benign figure quoted at each temperature point in the data book. Hence predicted MTBF figures for other environments
can be calculated very quickly. All the values
will in general be lower and, since the majority of the mobile environments have the
same factor, a quick divisor can be calculated for each condition. Therefore the only
calculation necessary is to devide the quoted MTBF fig. by the divisor given in table 2.
summation of each individual component
characteristic (λC).
July-2006
www.recom-international.com
DC-DC Converter Applications
Environment
Ground
Benign
πE
Symbol
GB
Ground
Mobile
GM
Naval
Sheltered
NS
Aircraft
Inhabited
Cargo
AIC
Space
Flight
SF
Missile
Launch
ML
MIL-HDBK-271F
Description
Non-mobile, temperature and
humidity controlled environments
readily accessible to maintenance
Equipment installed in wheeled or
tracked vehicles and equipment
manually transported
Sheltered or below deck
equipment on surface ships or
submarines
Typical conditions in cargo
compartments which can be
occupied by aircrew
Earth orbital. Vehicle in neither
powered flight nor in atmospheric
re-entry
Severe conditions relating
to missile launch
Commercial Interpretation
or Examples
Laboratory equipment, test
instruments, desktop PC's,
static telecomms
In-vehicle instrumentation,
mobile radio and telecomms,
portable PC's
Navigation, radio equipment
and instrumentation below
deck
Pressurised cabin compartments and cock-pit, in flight
entertainment and non-safety
critical applications
Orbital communications satellite, equipment only operated
once in-situ
Severe vibrational shock and
very high accelerating forces,
satellite launch conditions
Table 1: Interpretation of Environmental Factors
VO
DC
VIN
DC
GND
0V
a) Single Output
DC
VIN
+VO
0V
-VO
DC
GND
b) Dual Output
VIN
VO1
0V1
VO 2
0V2
DC
DC
GND
c) Twin Isolated Outputs
Figure 1: Standard Isolated Configurations
VCC
+VO
DC
Environment
Ground Benign
Ground Mobile
Naval Sheltered
Aircraft
Inhabited
Cargo
Space Flight
Missile Launch
πE
Symbol
GB
GM
GNS
AIC
SF
ML
πE Divisor
Value
0.5
1.00
4.0
1.64
4.0
1.64
4.0
0.5
12.0
1.64
1.00
3.09
Table 2: Environmental Factors
Noise
Input conducted noise is given in the line
conducted spectra for each DC-DC converter (see EMC issues for further details).
Noise is affected significantly by PCB layout,
measurement system configuration, terminating impedance etc., and is difficult to
quote reliably and with any accuracy other
than via a spectrum analysis type plot.
There will be some switching noise present
on top of the ripple, however, most of this is
easily reduced by use of small capacitors or
filter inductors, as shown in the application
notes.
Operating temperature range:
Operating temperature range of the converter is limited due to specifications of the
components used for the internal circuit of
the converter.
www.recom-international.com
The diagram for temperature derating
shows the safe operating area (SOA) within
which the device is allowed to operate. At
very low temperatures, the specifications
are only guaranteed for full load.
Up to a certain temperature 100% power
can be drawn from the device, above this
temperature the output power has to be
less to ensure function and guarantee specifications over the whole lifetime of the
converter.
These temperature values are valid for
natural convection only. If the converter is
used in a closed case or in a potted PCB
board, higher temperatures will be present
in the area around thermal converter because the convection may be blocked.
If the same power is also needed at higher
temperatures either the next higher wattage
series should be chosen or if the converter
has a metal case, a heatsink may be considererd.
Calculation of heatsinks:
All converters in metal-cases can have a
heatsink mounted so the heat generated
by the converters internal power dissipation Pd can be removed. The general specification of the whole thermal system incl.
heatsink is it’s thermal resistance
RTH case-ambient
July-2006
DC
0V
-VO
GND
a) Non-lsolated Dual Rails
VCC
DC
DC
+VO
0V
-VO
GND
b) Non-lsolated Negative Rail
VCC
DC
DC
+VO
(VO+VIN)
0V
GND
c) Dual Isolated Outputs (U/T)
Figure 2: Alternative Supply Configurations
Power dissipation Pd:
Pd = Pin − Pout =
RTHcase-ambient
=
Pout
− Pout
Efficiency
Tcase − Tambient
Pd
303
DC-DC Converter Applications
Example: RP30-2405SEW starts derating
without heatsink at +65°C but the desired
operation is 30W at +75°C so the size of
the heatsink has to be calculated.
Pout = 30 W
Efficiency = 88% max.
30 W
Pout
– 30 W = 4,1 W
Pd =
− Pout =
Efficiency
88 %
Tcase = 100 °C (max. allowed case temperature)
Tambient = 75 °C
RTHcase-ambient
T −T
= case ambient
Pd
= 100 °C – 75 °C = 6,1°C/W
4,1 W
So it has to be ensured that the thermal
resistance between case and ambient is
6,1°C/W max.
When mounting a heatsink on a case there
is a thermal resistance RTH case-heatsink between case and heatsink which can be
reduced by using thermal conductivity paste
but cannot be eliminated totally.
Heatsink mounted on case
without thermal conductivity paste
RTH case-heatsink = ca. 1…2 °C/W
Heatsink mounted on case
with thermal conductivity paste
RTH case-heatsink = ca. 0,5…1 °C/W
Heatsink mounted on case
with thermal conductivity paste
and electrical-isolation-film
RTH case-heatsink = ca. 1…1,5 °C/W
If a heatsink is mounted on the converter it’s thermal resistance has to be at least:
RTHheat sink-ambient = RTHcase-ambient − RTHcase-heat sink = 6,1 °C/W – 1°C/W = 5,1 °C/W
Using this value, a suitable heat sink can be
selected.
Adding a fan increases the efficiency of any
additional heat sinking, but adds cost and
power loading.
In most cases choosing the next higher
wattage-series and using power-decreasing via derating may be the more efficient
solution.
only, hence referencing the isolated ground
will only work if all the current return is
through the DC-DC and not via other external components (e.g. diode bias, resistor
feed). Having an alternative return path can
upset the regulation and the performance of
the system may not equal that of the converter.
Isolation Voltage vs. Rated Working
Voltage
The isolation voltage given in the datasheet
is valid for 1 second flash tested only.
If a isolation barrier is required for longer or
infinite time the Rated Working Voltage has
to be used.
Conversion of Isolation Voltage to Rated
Working Voltage can be done by using this
table or graph.
Isolation
One of the main features of the majority of
Recom International Power GmbH DC-DC
converters is their high galvanic isolation
capability. This allows several variations on
circuit topography by using a single DC-DC
converter.
The basic input to output isolation can be
used to provide either a simple isolated output power source, or to generate different
voltage rails, and/or dual polarity rails (see
figure 1).
These configurations are most often found
in instrumentation, data processing and
other noise sensitive circuits, where it is
necessary to isolate the load and noise presented to the local power supply rails from
that of the entire system. Usually local supply noise appears as common mode noise
at the converter and does not pollute the
main system power supply rails.
The isolated positive output can be connected to the input ground rail to generate a
negative supply rail if required. Since the
output is isolated from the input, the choice
of reference voltage for the output side can
be arbitrary, for example an additional single
rail can be generated above the main supply
rail, or offset by some other DC value (see
figure 2).
Regulated converters need more consideration than the unregulated types for mixing
the reference level. Essentially the single
supply rail has a regulator in its +VO rail
304
Isolation Test Voltage (kV)
RTHcase-ambient = RTHcase-heat sink + RTHheat sink-ambient
12
10
8
6
4
2
0
0
1
2
3
4
5
6
7
Rated Working Voltage (kV)
Figure 5: IEC950 Test Voltage for Electrical Strength Tests
Isolation Test Voltage (V)
Rated Working Voltage (V)
1000
130
1500
230
3000
1100
6000
3050
Table 2: Typical Breakdown Voltage Ratings According to IEC950
July-2006
www.recom-international.com
DC-DC Converter Applications
The graph and table above show the requirements from IEC950. According to our
Isolation Test Voltage
(1 second)
500 VDC
1000 VDC
1500 VDC
2000 VDC
2500 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
experience and in-house-test, we can offer
the following conversion tables:
Isolation Test Voltage
(1 minute)
400 VDC
800 VDC
1200 VDC
1600 VDC
2000 VDC
2400 VDC
3200 VDC
4000 VDC
4800 VDC
Isolation Test Voltage
(1 minute)
250 VAC
500 VAC
750 VAC
1000 VAC
1250 VAC
1500 VAC
2000 VAC
2500 VAC
3000 VAC
Table 1 : D.C. Isolation Voltage test vs different conditions
Isolation Test Voltage
(1 second)
500 VAC
1000 VAC
1500 VAC
2000 VAC
2500 VAC
3000 VAC
4000 VAC
5000 VAC
6000 VAC
Isolation Test Voltage
(1 minute)
350 VAC
700 VAC
1050 VAC
1400 VAC
1750 VAC
2100 VAC
2800 VAC
3500 VAC
4200 VAC
Isolation Test Voltage
(1 minute)
565 VDC
1130 VDC
1695 VDC
2260 VDC
2825 VDC
3390 VDC
4520 VDC
5650 VDC
6780 VDC
Table 2 : A.C. Isolation Voltage test vs different conditions
Isolation mode in IGBT driver circuits
DC/DC converters may be used in driver circuits for IGBT stacks. In these applications, an additional source of stress has to be considered. Not only the permanently high isolation voltage requiring a high rated working voltage for the converter is present, but also the highly
dynamic switching is a stressing factor - this can reach 20kV/µs and more !
Taking into account that both factors mean a permanent stress to the converter for all of it's lifetime, it is recommended to overspec the
converter in terms of isolation - i.e. even if a 3kVDC (for 2 second) product seems to fit if you look at just the rated working voltage that is
required, it still is recommended to choose a product which is specified for 5,2kVDC or 6kVDC (for 1 second) to cover also the high dv/dt.
The higher the isolation voltage rating for a DC/DC converter is, the lower the coupling (isolation) capacitance and a low coupling capacitance is essential in AC or highly dynamic switched DC usage.
This will ensure a safe usage and avoid a shortened lifetime in such a highly demanding situation.
www.recom-international.com
July-2006
305
DC-DC Converter Applications
Vcc
Connecting
DC-DC Converters in Series
DC
Galvanic isolation of the output allows multiple converters to be connected in series,
simply by connecting the positive output of
one converter to the negative of another (see
figure 3). In this way non-standard voltage
rails can be generated, however, the current
output of the highest output voltage converter should not be exceeded.
When converters are connected in series,
additional filtering is strongly recommended,
as the converters switching circuits are not
synchronised. As well as a summation of the
ripple voltages, the output could also produce relatively large beat frequencies. A capacitor across the output will help, as will a
series inductor (see filtering).
DC
DC
0V
+Vo
DC
2Vo
0V
GND
have to deliver less current. The overloaded
converter may then drop out of circuit leading to power supply oscillation.
The only possibility to balance out the individual currents is to use a special balance
function (like in R-5xxx) or use converters
with SENSE function and additional loadshare-controllers (as can be done for RP40xxxxSG).
Vcc
Figure 3: Connecting DC-DC Converters in Series
DC
+V
DC
Connecting
DC-DC Converters in Parallel
Balance
Link
Connecting the outputs of DC/DC converters
in parallel is possible but not recommended.
Usually DC/DC converters have no possibility to balance out the output currents. So
there is potential danger that if the loading
is asymmetrical, that one of the converters
starts to be overloaded while the others
+Vout
DC/DC
Converter 1
+Vo
DC
DC
0V
GND
Figure 4: Paralleled DC-DC Converters with Balance
Function.
RADJ
+Sense
-Sense
RSENSE
-Vout
ADJ
Sense VCC
Load Share
Control +Share
-Share
+Vout
DC/DC
Converter 2
System
VCC
RADJ
+Sense
-Sense
RSENSE
-Vout
ADJ
Sense VCC
System
GND
-Share
Connected
to System
GND
Load Share
Control +Share
-Share
Figure 5: Paralleled DC-DC Converters using Load Share Controllers
306
July-2006
www.recom-international.com
DC-DC Converter Applications
Filtering
When reducing the ripple from the converter, at either the input or the output, there
are several aspects to be considered.
Recom recommend filtering using simple
passive LC networks at both input and output (see figure 6). A passive RC network
could be used, however, the power loss
through a resistor is often too high.The selfresonant frequency of the inductor needs to
be significantly higher than the characteristic frequency of the device (typically
1OOkHz for Recom DC-DC converters). The
DC current rating of the inductor also needs
consideration, a rating of approximately twice
the supply current is recommended.
The DC resistance of the inductor is the final
consideration that will give an indication of
the DC power loss to be expected from the
inductor.
Output Filtering calculation:
Calculating of the filtering components can
be done using
fc =
fc =10 % of 85 kHz = 8,5 kHz
However, depending on your application
design and loadsituation may interfer with
the calculated filter so testing in the final
application and re-adjustment of the component’s values may be necessary.
When choosing a value for the filtering
capacitor please take care that the maximum capacitive load is within the specifications of the converter.
Better results in filtering can be achieved if
common mode chokes are used instead of a
single choke. Common mode chokes are
multiple chokes sharing a core material so
the common mode rejection (Electrical noise
which comes through one power line and
returns to the noise source through some
type of ground path is common mode
noise.) is higher. Please refer to our page
"Common Mode Chokes for EMC" also part
of these application notes. These can be
used for input filtering as well as for the output side.
( –RCt )
When the component is initially switched on
(i.e. t=O) this simplifies to;
i=V
R
This would imply that for a 5V input, with
say 50mOhm track and wire resistance, the
inrush current could be as large as 1OOA.
This could cause a problem for the DC-DC
converter.
A series input inductor therefore not only filters
the noise from the internal switching circuit,
but also limits the inrush current at switch on.
Using a series inductor at the input will limit
the current that can be seen at switch on
(see figure 7).
1
2π L OUT C0
Example - RC series:
Operating frequency = 85kHz max.
1
V
i =_
R
–t
Voltage : V = Vin (1 – exp __ )
RC
( )
VIN
V
Current : i = _ exp
R
2π L OUT C0
fc = 8,5 kHz =
i = V exp
R
Limiting Inrush Current
This frequency should be significant lower
than the switching frequency of the converter.
fc =
If we consider the circuit without the series
inductor, then the input current is given by;
( –t__
)
RC
1
time
2π L OUT C0
for:
L OUT = 470 µH
Figure 7: Input Current & Voltage at Switch On
⎞ ⎛
⎛
⎞
1
1
⎟ =⎜
⎟ = 745 nF
C0 = ⎜⎜
2
⎜
⎟
2
⎟
⎝ (2 π fc) L OUT ⎠ ⎝(2 π 8,5 kHz) 470 uH ⎠
Figure 6: Input and Output Filtering
www.recom-international.com
July-2006
307
DC-DC Converter Applications
Maximum Output Capacitance
A simple method of reducing the output
ripple is simply to add a large external capacitor. This can be a low cost alternative to
the LC filter approach, although not as
effective. There is also the possibility of causing start up problems, if the output capacitance is too large.
With a large output capacitance at switch
on, there is no charge on the capacitors and
the DC-DC converter immediately experiences a large current demand at its output.
The inrush current can be so large as to
exceed the ability of the DC-DC converter,
and the device can go into current limit or
an undefined mode of operation. In the
worst case scenario the device continuously "hiccups" as it tries to start, goes into
overload shutdown and then retries again.
Single Output
Unregulated 0.25W
Unregulated 0.5W
The DC-DC converter may not survive if this
condition persists.
For the Powerline the maximum capacitive
loads are specified. For Econoline please
refer to the tables below.
If instead of single capacitors on outputs a
L-C-filter is used the max. capacitive laod
can be higher because the choke is preventing too high rising speed of the current
peak. However the achievable max. cap.
load is depending on the quality of the filter
and the ESR of the capacitors.
Settling Time
The main reason for not fitting a series
inductor internally, apart from size constraints, is that many applications require a
fast switch on time. When the input voltage
is a fast ramp, then the output can respond
within 500µs of the input reaching its target
voltage (measured on a range of RA/RB and
RC/RD converters under full output load without external filters). The use of external filters and additional input or output capacitance will slow this reaction time. It is therefore left to the designer to decide on the
predominant factors important for their circuit, settling time or noise performance.
Isolation Capacitance
and Leakage Current
The isolation barrier within the DC-DC converter has a capacitance, which is a measure of the coupling between input and output circuits. Providing this is the largest
coupling source, a calculation of the leakage current between input and output circuits
can be calculated.
Max. capacitive load
Dual Output
4.7µF max.
Single output
Unregulated 1W
Regulated 0.5W
Unregulated 1.25W
6.8µF max.
Unregulated 1.5W
10µF max.
3.3µF max.
2.2W
6.8µF max.
Dual output
Unregulated 2W
Regulated 1W
10µF max.
6.8µF max.
Max. capacitive load for unregulated Econoline models
3.3V
1000µF
5.0V
470µF
9.0V
220µF
12.0V
120µF
15.0V
100µF
±5.0V
±220µF
±9.0V
±100µF
±12.0V
±68µF
±15.0V
±47µF
Max. capacitive load for REC2.2 series
Max. capacitive load
Max. capacitive load
Single output
3W , 5W
Dual output
3.3V
2200µF
5.0V
1000µF
3300µF
5.0V
2200µF
9.0V
680µF
12.0V
330µF
15.0V
220µF
±5.0V
±1000µF
±9.0V
±330µF
9.0V
470µF
12.0V
220µF
15.0V
120µF
±5.0V
±470µF
±9.0V
±220µF
±12.0V
±100µF
±12.0V
±160µF
±15.0V
±68µF
±15.0V
±100µF
Max. capacitive load for REC3 and REC5 series
308
Single output
3.3V
7.5W
Dual output
Max. capacitive load for REC7.5 series
July-2006
www.recom-international.com
DC-DC Converter Applications
Assuming we have a known isolation capacitance (Cis - refer to datasheet) and a known
frequency for either the noise or test signal,
then the expected leakage current (iL) between input and output circuits can be calculated from the impedance.
The general isolation impedance equation
for a given frequency (f) is given by:
Zf = ___1___
j2 π C is
For an RB-0505D, the isolation ca-pacitance is 18pF, hence the isolation im-pedance
to a 50Hz test signal is:
Z50 = ___1_______ = 177 M Ω
j2 π 50 18 pf
If using a test voltage of 1kVrms,
the leakage current is:
iL = Vtest = _1000V_ = 5.65 µA
177MΩ
Z
f
It can be easily observed from these simple
equations that the higher the test or noise
voltage, the larger the leakage current, also
the lower the isolation capacitance, the lower
the leakage current. Hence for low leakage
current, high noise immunity designs, high
isolation DC-DC converters should be selected
with an appropriate low isolation capacitance.
detecting the input current, or the output
voltage (see figure 9).
If there is an intelligent power management
system at the input, using a series resistor
(in place of the series inductor) and detecting the voltage drop across the device to
signal the management system can be
used. A similar scheme can be used at the
output to determine the output voltage,
however, if the management system is on
the input side, the signal will need to be isolated from the controller to preserve the
system isolation barrier (see figure 10).
There are several other current limiting
techniques that can be used to detect an
overload situation, the suitability of these is
left to the designer. The most important
thing to consider is how this information will be
used. If the system needs to signal to a controller the location or module causing the overload,
some form of intelligence will be needed. If
the device simply needs to switch off, a simple fuse type arrangement will be adequate.
Unregulated RECOM DC/DC converters usually are short circuit protected only for a
short time like 1 second. By option they can
be continous short circuit protected (option
/P), then their design is able to withstand the
high output current at overload situation without any need for extra circuit protection. All
Recom DC-DC converters which include an
internal linear regulator have a thermal overload shut-down condition which protects
these devices from excessive over-load. If
this condition is to be used to inform a
power management system, the most suitable arrangement is the output voltage
detector (see figure 10a), since this will fall
to near zero on shut-down. Wide input range
regulated converters offer overload protection / short circuit protection via an internal
circuit that interfers with the primary oscillator so the switching is regulated back in
situations of overload or output short circuit.
VIN
DC
Fuse
DC
GND
Figure 8: Simple Overload Protection
Application Examples
Overload Protection
Although the use of filtering will prevent
excessive current at power-on under normal
operating conditions, many of the lower cost
converters have no protection against an
output circuit taking excessive power or
even going short-circuit. When this happens, the DC-DC converter will take a large
input current to try to supply the output.
Eventually the converter will overheat and
destroy itself if this condition is not rectified
(short circuit overload is only guaranteed for
1 s on an unregulated part).
There are several ways to prevent overload
at the outputs destroying the DC-DC converter. The simplest being a straight forward
fuse. Sufficient tolerance for inrush current
is required to ensure the fuse does not blow
on power-on (see figure 8). Another simple
scheme that can be applied is a circuit
breaker.
There is also the potential to add some intelligence to the overload scheme by either
www.recom-international.com
RIN
VCC
DC
DC
VOL
GND
a) Series Resistor for Input Current Measurement
VCC
ILIMIT
DC
R1
R2
GND
b) Ground Current Monitor
DC
RGND
Choose current limit (ILIMIT)
and ground resistor (RGND) so
that : 0.7V = RGND x ILIMIT.
Figure 9: Input Monitored Overload Protection
July-2006
309
DC-DC Converter Applications
Input Voltage
Drop-Out (brown-outs)
VCC
+VO
DC
DC
OV
GND
RD
RO
Opto-Isolator
VOL
Opto-Isolated Overload Detector
(On overload +VO falls and the LED switches off, the VOL. line is then pulled high.)
Figure 10 : Ouput Monitored Overload Protection
No Load Over Voltage Lock-Out
LIN
ZDX60
When the input voltage drops, or is momentarily removed, the output circuit would
suffer similar voltage drops. For short period input voltage drops, such as when other
connected circuits have an instantaneous
current demand, or devices are plugged in or
removed from the supply rail while 'hot', a
simple diode-capacitor arrangement can prevent the output circuit from being effected.
The circuit uses a diode feed to a large
reservoir capacitor (typically 47µF electrolytic), which provides a short term reserve
current source for the converter, the diode
blocking other circuits from draining the
capacitor over the supply rail. When combined with an in-line inductor this can also be
used to give very good filtering. The diode
volt drop needs to be considered in the
power supply line under normal supply conditions. A low drop Schottky diode is recommended (see figure 11).
DC
47µF
Output Circuit
DC
Figure 11 : Input Voltage Drop-out
R10%
DC
DC
R10%
Unregulated DC-DC converters are expected
to be under a minimum of 10% load, hence
below this load level the output voltage is
undefined. In certain circuits this could be a
potential problem.
The easiest way to ensure the output voltage remains within a specified tolerance, is to
add external resistors, so that there is
always a minimum 10% loading on the
device (see figure 12). This is rather inefficient in that 10% of the power is always
being taken by this load, hence only 90% is
available to the additional circuitry.
Zener diodes on the output are another simple method. It is recommended that these
be used with a series resistor or inductor, as
when the Zener action occurs, a large current surge may induce signal noise into the
system.
R2
DC
DC
Figure 12: No Load over Voltage Lock-Out
310
July-2006
www.recom-international.com
DC-DC Converter Applications
Long Distance Supply Lines
When the supply is transmitted via a cable,
there are several reasons why using an isolated DC-DC converter is good design practice (see figure 13). The noise pick up and
EMC susceptibility of a cable is high compared to a pcb track. By isolating the cable via
a DC-DC converter at either end, any cable
pick-up will appear as common mode noise
and should be self-cancelling at the converters.
Another reason is to reduce the cable loss
by using a high voltage, low current power
transfer through the cable and reconverting
RB-0512D
LCD Display Bias
A LCD display typically requires a positive or
negative 24V supply to bias the crystal. The
RO-0524S converter was designed specifically for this application. Having an isolated
OV output, this device can be configured as
a +24V supply by connecting this to the
GND input, or a –24V supply by connecting
the +Vo output to GND (see figure 14).
RO-2405
Cable
DC
Vin
GND
supply is required through the cable, a cable
loss of 44mW.
DC
DC
DC
Target Circuit
Figure 13: Long Distance Power Transfer
RO-0524S
DC
DC
Liquid
Crystal
Display
-24V
(up to 42mA)
Figure 14: LCD Display Bias
at the terminating circuit. This will also reduce noise and EMC susceptibility, since the
noise voltage required to affect the rail is
also raised.
For example, compare a system having a 5V
supply and requiring a 5V, 500mW output at
a remote circuit. Assume the connecting
cable has a 100 Ohm resistance. Using an
RN-0505 to convert the power at either end
of the cable, with a 100mA current, the
cable will lose 1W (I2R) of power.
The RO/RN would not be suitable, since this
is its total power delivery; hence there is no
power available for the terminating circuit.
Using a RB-0512D to generate 24V and a
RA-2405D to regenerate 5V, only a 21 mA
www.recom-international.com
EIA-232 Interface
In a mains powered PC often several supply rails are available to power a RS232
interface. However, battery operated PC’s or
remote equipment having a RS232 interface added later, or as an option, may not
have the supply rails to power a RS232
interface. Using a RB-0512S is a simple
single chip solution, allowing a fully EIA-232
compatible interface to be implemented
from a single 5V supply rail, and only 2
additional components (see figure 15).
July-2006
3V/5V Logic Mixed Supply Rails
There has been a lot of attention given to
new l.C.'s and logic functions operating at
what is rapidly emerging as the standard
supply level for notebook and palmtop computers. The 3.3V supply is also gaining rapid
acceptance as the defacto standard for personal telecommunications, however, not all
circuit functions required are currently available in a 3.3V powered IC. The system designer therefore has previously had only two
options available; use standard 5V logic or
wait until the required parts are available in
a 3V form, neither being entirely satisfactory and the latter possibly resulting in lost
market share.
There is now another option, mixed logic
functions running from separate supply
rails. A single 3.3V line can be combined
with a range of DC-DC converters from
Recom, to generate voltage levels to run virtually any standard logic or interface IC.
The Recom range includes dual output parts
for powering analogue bipolar and amplifier
functions (RA/RB series), as well a single
output function for localised logic functions
(RL/RM, RN/RO series). A typical example
might be a RS232 interface circuit in a laptop PC using a 3.3V interface chip (such as
the LT1330), which accepts 3.3V logic
signals but requires a 5V supply (see figure
16). Recom has another variation on this
theme and has developed two 5V to 3.3V
step down DC-DC converters (RL-053.3 and
R0-053.3). These have been designed to
allow existing systems to start incorporating available 3.3V l.C.'s without having to
redesign their power supply.
This is particularly important when trying to
reduce the overall power demand of a
system, but not having available all of the
functions at the 3.3V supply.
The main application for this range of devices are system designers, who want to
provide some functionality that requires a
higher voltage than is available from the
supply rail, or for a single localised function.
Using a fully isolated supply is particularly
useful in interface functions and systems
maintaining separate analogue and digital
ground lines.
311
DC-DC Converter Applications
Isolated Data
Acquisition System
+12V
EIA-232 Port
VCC
5V
VDD
DCD
RB-0512D
DB9S Connector
DSR
+VO
RX
DC
OV
RTS
TX
-VO
CTS
DC
DTR
GND
RI
EMC Considerations
When used for isolating a local power supply and incorporating the appropriate filter
circuits as illustrated in Fig. 17), DC-DC converters can present simple elegant solutions
to many EMC power supply problems. The
range of fixed frequency DC-DC converters
is particularly suitable for use in EMC problem situations, as the stable fixed switching
frequency gives easily characterised and
easily filtered output.
The following notes give suggestions to
avoid common EMC problems in power supply circuits.
SN75C185
Figure 15: Optimised RS232 Interface
3.3VCC
RL-3.305
3
1
Any active system requiring isolation will
need a DC-DC converter to provide the
power transfer for the isolated circuit. In a
data acquisition circuit there is also the need
for low noise on the supply line; hence good
filtering is required.
The circuit shown (see figure 17) provides a
very high isolation barrier by using an
RG/RH/RJ/RK converter; to provide the
power isolation and SFH610 opto-isolators
for the data isolation. An overall system isolation of 2.5kV is achieved.
8
DC
DC
+5V
7
OV
GND
GND
VCC
1µF
1
3.3V
2
3
+
100nF
-V
+V
28
26
+
220nF
3.3V Logic
200nF
4
27
TX1
14
25
5
TX1
RX1
24
6
RX1
RS232
17
LT1330
GND
Figure 16: RS232 Interface with 3V Logic
312
July-2006
www.recom-international.com
DC-DC Converter Applications
5V
Opto Isolators
4K7
Data
RH-0505
1K2
5V
5V Logic Circuit
Data
CS
4K7
5V
CS
1K2
4K7
Status
VCC
+5V
1K2
Status
CLK
+5V
CLK
Vref
ZN509
47µH
+5V
AIN
1K2
+5V
DC
DC
1µF
470vF
GND
4K7
1K2
SFH610
Power Supply Considerations
Figure 17: Isolated Serial ADC System
● Eliminate loops in supply lines (see figure 18).
● Decouple supply lines at local boundaries (use RCL fitters with
VCC
PSU
CCT1
8
CCT2
GND
VCC
PSU
CCT1
3
CCT2
GND
low Q, see figure 19).
● Place high speed sections close to the power line input, slowest section furthest away (reduces power plane transients, see
figure 20).
● Isolate individual systems where possible (especially analogue
and digital systems) on both power supply and signal lines (see
figure 21).
An isolated DC-DC converter can provide a significant benefit to
help reduce susceptibility and conducted emission due to the isolation of both power rail and ground from the sys-tem supply. The
range of DC-DC converters available from Recom all utilise toroidal power transformers and as such have negligible EMI.
Isolated DC-DC converters are switching devices and as such
have a characteristic switching frequency, which may need some
additional filtering.
Interpretation of DC-DC Converter EMC Data
Figure 18: Eliminate Loops in Supply Line
VCC
CCT1
GND
Figure 19: Decouple Supply Lines at Local Boundaries
www.recom-international.com
CCT2
Electromagnetic compatibility (EMC) of elec-trical and electronic
products is a measure of electrical pollution. Throughout the world
there are increasing statutory and regulatory requirements to
demonstrate the EMC of end products. In Europe the EC directive
89/336/EEC requires that, any product sold after 1 January 1996
complies with a series of EMC limits, otherwise the product will be
prohibited from sale within the EEC and the seller could be prosecuted and fined.
Although DC-DC converters are generally exempt from EMC regulations on the grounds that these are component items, it is the
belief of Recom that the information on the EMC of these components can help de- signers ensure their end product can meet the
relevant statutory EMC requirements. It must be remembered
however, that the DC-DC converter is unlikely to be the last component in the chain to the mains supply, hence the information
quoted needs interpretation by the circuit designer to deter-mine
its impact on the final EMC of their system.
July-2006
313
DC-DC Converter Applications
directive covers the frequency spectrum
150kHz to 1GHz, but as two separate and
distinct modes of transmission.
The Recom range of DC-DC converters feature toroidal transformers. These have been
tested and proved to have negligible radiated noise. The low radiated noise is primarily due to toroidal shaped transformers maintaining the mag-netic flux within the core,
hence no magnetic flux is radiated by
design. Due to the exceptionally low value of
radiated emis-sion, only conducted emissions are quoted.
Conducted emissions are measured on the
input DC supply line. Unfortunately no standards exist for DC supplies, as most standards cover mains connected equipment.
This poses two problems for a DC supplied
device, firstly no standard limit lines can be
directly applied, since the DC supplied device does not directly connect to the mains,
also all reference material uses the earthground plane as reference point. In a DC
system often the OV is the reference, however, for EMC purposes, it is probably more
effective to maintain the earth as the reference, since this is likely to be the reference
that the shielding or casing is connected to.
Consequently all measurements quoted are
referenced to the mains borne earth.
Local
P
S
U
Power Input
High Speed
Circuit
Low Speed
Circuit
Medium Speed
Circuit
DC Circuit
Filter
Figure 20: Place High Spead Circuit Close to PSU
VCC
DC
DC
CCT1
DC
DC
CCT2
GND
Figure 21 : Isolate Individual Systems
Power Supply
Line Impedance
Stabilisation Network (LISN)
50Ω
Termination
–
LISN
DC
Load
DC
+
LISN
To Spectrum Analyser
Figure 22: Filtered Supply to DC-DC Converter
The notes given here are aimed at helping
the designer interpret the effect the DC-DC
converter will have on the EMC of their end
product, by describing the methods and
rationale for the measurements made.
Where possible CISPR and EN standards
have been used to determine the noise
spectra of the components, however, all of
the standards reference to mains powered
equipment and interpretation of these specifications is necessary to examine DC supplied devices.
314
Conducted and
Radiated Emissions
There are basically two types of emissions
covered by the EC directive on EMC, radiated and conducted. Conducted emissions
are those transmitted over wire connecting
circuits together and covers the frequency
spectrum 150kHz to 30MHz. Radiated are
those emissions transmitted via electromagnetic waves in air and cover the frequency
spectrum 30MHz to 1GHz. Hence the EC
July-2006
It is necessary to ensure that any measurement of noise is from the device under test
(DUT) and not from the supply to this device.
In mains connected circuits this is im-portant and the mains has to be filtered prior to
supply to the DUT. The same approach has
been used in the testing of DC-DC converters and the DC supply to the converter was
filtered, to ensure that no noise from the
PSU as present at the measuring instrument.
A line impedance stabilisation network
(LISN) conforming to CISPR 16 specification is connected to both positive and negative supply rails and referenced to mains
earth (see figure 22). The measurements
are all taken from the positive supply rail,
with the negative rail measurement point
terminated with 50 Ohm to impedance
match the measurement channels.
www.recom-international.com
DC-DC Converter Applications
2
Conducted Emission (dBuV)
100
4
1
80
8
6
12
10
3
60
5
7
9
11
13
40
20
0
0
100
300
200
400
500
Frequency (kHz)
Figure 23: Individual Line Spectra
50
40
Frequency (kHz)
30
20
10
0
0
2
4
6
8
10
12
14
Input Voltage (V)
Figure 24: Frequency Voltage Dependency
Conducted Emission (dBuV)
100
80
60
40
20
0
100kHz
1MHz
10MHz
100MHz
Frequency
Figure 25 : V Spectrum
Shielding
Line Spectra of DC-DC Converters
At all times the DUT, LlSN's and all cables
connecting any measurement equipment,
loads and supply lines are shielded. The
shielding is to prevent possible pick-up on
cables and DUT from external EMC sources
(e.g. other equipment close by). The shielding is referenced to mains earth (see figure 22).
All DC-DC converters are switching devices,
hence, will have a frequency spectra. Fixed
input DC-DC converters have fixed switching frequency, for example the RC/RD
range of converters has a typical switching
frequency of 50kHz. This gives a stable and
predictable noise spectrum regardless of
load conditions.
If we examine the noise spectrum closely
(see figure 23) we can see several distinct
peaks, these arise from the fundamental
www.recom-international.com
July-2006
switching frequency and its harmonics (odd
line spectra) and the full rectified spectra, at
twice the fundamental switching frequency
(even line spectra). Quasi-resonant converters, such as the Recom range, have square wave switching waveforms, this produces
lower ripple and a higher efficiency than
soft switching devices, but has the drawback of having a relatively large spectrum of
harmonics.
The EC regulations for conducted interference covers the bandwidth 150kHz to
30MHz. Considering a converter with a
100kHz nominal switching frequency, this
would exhibit 299 individual line spectra.
There will also be a variation of absolute
switching frequency with production variation, hence a part with a 90kHz nominal frequency would have an additional 33 lines
over the entire 30MHz bandwidth. Absolute
input voltage also produces slight variation
of switching frequency (see figure 24). Hence,
to give a general level of conducted noise,
we have used a 100kHz resolution bandwidth (RBW) to examine the spectra in the
data sheets. This wide RBW gives a maximum level over all the peaks, rather than the
individual line spectra. This is easier to read
as well as automatically compensating for
variances in switching frequency due to production variation or differences in absolute
input voltage (see figure 25).
The conducted emissions are measured
under full load conditions in all cases. Under
lower loads the emission levels do fall,
hence full load is the worst case condition
for conducted line noise.
Temperature Performance
of DC-DC Converters
The temperature performance of the DC-DC
converters detailed in this book is always
better than the quoted operating temperature range. The main reason for being conservative on the operating temperature
range is the difficulty of accurately specifying parametric performance outside this
temperature range.
There are some limiting factors which provide physical barriers to performance, such as
the Curie temperature of the core material
used in the DC-DC converter (the lowest
Curie temperature material in use at Recom
is 125°C). Ceramic capacitors are used
almost exclusively in the DC-DC converters
because of their high reliability and extended life properties, however, the absolute
315
DC-DC Converter Applications
Switching Frequency (kHz)
160
handle the components only by the central
body area where there are no component
pins.
O/N
140
Under Full Load Conditions
A/B
120
C/D
100
80
60
–20
0
20
40
60
80
100
Temperature (°C)
Figure 26: Typical Switching Frequency vs. Temperature
capacity of these can fall when the temperature rises above 85°C (ripple will increase). Other considerations are the power dissipation within the active switching components, although these have a very high temperature rating. Their current carrying capacity derates as temperature exceeds 100°C.
Therefore this allows the DC-DC converters
to be used above their specified operating
temperature, providing the derating of power
delivery given in the specification is adhered
to. Components operating outside the quoted
operating temperature range cannot be expected to exhibit the same parametric performance that is quoted in the specification.
An indication of the stability of a device can
be obtained from the change in its operating
frequency, as the temperature is varied (see
figure 26). A typical value for the frequency
variation with temperature is 0.5% per °C, a
very low value compared to other commercial parts. This illustrates the ease of filtering
of Recom DC-DC converters, since the frequency is so stable across load and temperature ranges.
Transfer Moulded
(SMD) DC-DC Converters
Production Guideline Application Note
The introduction by Recom of a new and
innovative method of encapsulating hybrid
DC-DC converters in a transfer moulded
(TM) epoxy molding compound plastic has
enabled a new range of surface mount
(SMD) DC-DC converters to be brought to
market, which addresses the component
placement with SOIC style handling.
With any new component there are of course
new lessons to be learned with the mounting technology. With the Recom SMD DCDC converters, the lessons are not new as
such, but may require different production
techniques in certain applications.
316
Component Materials
Recom SMD converters are manufactured in
a slightly different way than the throughhole converters. Instead of potting the PCB
board inside a plastic case with conventional epoxy the whole package is molded
around the PCB board with epoxy molding
compound plastic. This ensures better thermal conductivity from the heat generating
components like semiconductors, transformer, etc. inside to the surface from where it
can dissipate via convection. This makes
them ideal for reflow processes also under
the stricter conditions of lead-free soldering
temperatures that meet the requirements of
the ROHS regulation.
All materials used in RECOM lead-free products are ROHS compliant, thus the total
amount of the restricted materials (lead,
mercury, cadmium, hexavalent chromium,
PBBs and PBDEs) are below the prescribed
limits. Detailed chemical analysis reports
are available.
Component Placement
Recom SMD DC-DC converters are designed to be handled by placement machines
in a similar way to standard SOIC packages.
The parts are available either in tubes
(sticks) or in reels. The parts can therefore
be placed using machines with either vibrational shuttle, gravity feeders, or reel feeders.The vacuum nozzle for picking and placing the components can be the same as
used for a standard 14 pin or 18 pin SOIC
(typically a 5mm diameter nozzle). An
increase in vacuum pressure may be beneficial, due to the heavier weight of the hybrid
compared to a standard SOIC part (a typical
14 pin SOIC weighs 0.1g, the Recom SMD
DC-DC converter weighs 1.5 ~ 2,7g). It is
advisable to consult your machine supplier
on the best choice of vacuum nozzle if in
doubt. If placing these components by hand,
July-2006
Component Alignment
The components can be aligned by either
optical recognition or manual alignment. If
using manual alignment it should be ensured that the tweezers press on the component body and not on the pins. The components themselves are symmetrical along
their axis, hence relatively easy to align
using either method.
Solder Pad Design
The Recom SMD DC-DC converters are
designed on a pin pitch of 2,54mm (0.1")
with 1,20mm pad widths and 1,80mm pad
lengths.
12.00
8
5
1 2
4
1.20
Top View
1.80
This allows pads from one part to be used
within a PCB CAD package for forming the
pad layouts for other SMD converters. These
pads are wider than many standard SOIC
pad sizes (0.64mm) and CAD packages may
not accommodate these pins with a standard SOIC pad pattern. It should be remembered that these components are power
supply devices and as such need wider
pads and thicker component leads to minimise resistive losses within the interconnects.
Solder Reflow Profile
RECOM's SMD converters are designed to
withstand a maximum reflow temperature of
245°C (for max. 30seconds) in accordance
with JEDEC STD-020C. If multiple reflow
profiles are to be used (i.e. the part is to pass
through several reflow ovens), it is recommended that lower ramp rates be used than
the maximum specified in JEDEC STD020C. Continual thermal cycling to this profile could cause material fatigue, if more
than 5 maximum ramp cycles are used.
In general these parts will exceed the reflow capability of most IC and passive components on a PCB and should prove the
most thermally insensitive component to the
reflow conditions.
www.recom-international.com
DC-DC Converter Applications
Lead-free Recommended Soldering Profile (SMD parts)
300
10-30s
min. 300s
Temperature (°C)
250
(245°C)
200
150
Pre - Heat
100
50
50
100
200
150
250
300
350
400
450
500
Time (seconds)
Lead-free Recommended Soldering Profile (Through hole parts)
Double Wave
340
320
300
3 - 5 seconds
Temperature (°C)
280
260
240
220
Forced Cooling
60°C/s Min.
100°C ~ 150°C Max.
200
180
160
140
120
100
80
60
40
20
0
Natural Cooling
Enter Wave
Pre - Heat
0
10
20
30
40
50
60
70
80
Time (seconds)
90
100
110
120
Notes: 1. The wave solder profile is measured on lead temperature.
2. Need to keep the solder parts internal temperature less than about 210°C
Recommended Solder Reflow Profile:
The following 2 graphs show the typical
recommended solder reflow profiles for
SMD and through-hole ROHS compliant
converters.
The exact values of the profile’s peak and
it’s maximum allowed duration is also given
in the datasheet of each converter.
Adhesive Requirements
If SM surface mount components are going
to be wave soldered (i.e. in a mixed through
hole and SMD PCB) or are to be mounted on
both sides of a PCB, then it is necessary to
use an adhesive to fix them to the board
www.recom-international.com
prior to reflow. The adhesive prevents the
SMD parts being 'washed off' in a wave solder, and being 'vibrated off' due to handling
on a double sided SMD board.
As mentioned previously, the Recom range
of SMD DC-DC converters are heavier than
standard SOIC devices. The heavier weight
is a due to their size (volume) and internal
hybrid construction. Consequently the parts
place a larger than usual stress on their solder joints and leads if these are the only
method of attachment. Using an adhesive
between component body and PCB can
reduce this stress considerably. If the final
system is to be subjected to shock and vibration testing, then using adhesive attachment
July-2006
is essential to ensure the parts pass these
environmental tests.
The Recom SMD DC-DC converters all have
a stand-off beneath the component for the
application of adhesive to be placed, without
interfering with the siting of the component.
The method of adhesive dispensing and
curing, plus requirements for environmental
test and in-service replacement will determine suitability of adhesives rather than the
component itself. However, having a thermoset plastic body, thermoset epoxy adhesive bonding between board and component
is the recommended adhesive chemistry.
If the reflow stage is also to be used as a
cure for a heat cure adhesive, then the component is likely to undergo high horizontal
acceleration and deceleration during the
pick and place operation. The adhesive must
be sufficiently strong in its uncured (green)
state, in order to keep the component accurately placed.
Adhesive Placement
The parts are fully compatible with the 3
main methods of adhesive dispensing; pin
transfer, printing and dispensing. The
method of placing adhesive will depend on
the available processes in the production
line and the reason for using adhesive
attachment. For example, if the part is on a
mixed though-hole and SMD board, adhesive will have to be placed and cured prior to
reflow. If using a SMD only board and heat
cure adhesive, the reflow may be used as
the cure stage. If requiring adhesive for
shock and vibration, but using a conformal
coat, then it may be possible to avoid a
separate adhesive alltogether, and the
coating alone provides the mechanical
restraint on the component body.
Patterns for dispensing or printing adhesive
are given for automatic lines. If dispensing
manually after placement the patterns for
UV cure are easily repeated using a manual
syringe (even if using heat cure adhesive).If
dispensing manually, dot height and size are
not as important, and the ad-hesive should
be applied after the components have been
reflowed. When dispensing after reflow, a
chip underfill formulation adhesive would be
the preferred choice. These types 'wick' under
the component body and offer a good all
round adhesion from a single dispensed dot.
The patterns allow for the process spread of
the stand-off on the component, but do not
account for the thickness of the PCB tracks.
317
DC-DC Converter Applications
If thick PCB tracks are to be used, a grounded copper strip should be laid beneath the
centre of the component (care should be
exercised to maintain isolation barrier
limits). The adhesive should not retard the
pins reaching their solder pads during placement of the part, hence low viscosity
adhesive is recommended.
The height of the adhesive dot, its viscosity
and slumping properties are critical. The dot
must be high enough to bridge the gap between board surface and component, but
low enough not to slump and spread, or be
squeezed by the component, and so contaminate the solder pads.
If wishing to use a greater number of dots of
smaller diameter (common for pin transfer
methods), the dot pattern can be changed,
by following a few simple guidelines. As the
number of dots is doubled their diameter
should be halved and centres should be at
least twice the printed diameter from each
other, but the dot height should re-main at
0.4mm. The printed dot should always be
positioned by at least its diameter from the
nearest edge of the body to the edge of the
dot. The number of dots is not important,
provided good contact between adhesive
and body can be guaranteed, but a minimum of 2 is recommended.
Cleaning
The thermoset plastic encapsulating material used for the Recom range of surface
mount DC-DC converters is not fully hermetically sealed. As with all plastic encapsulated active devices, strongly reactive
agents in hostile environments can attack
318
the material and the internal parts, hence
cleaning is recommended in inert solutions
(e.g. alcohol or water based solvents) and at
room temperature in an inert atmospheres
(e.g. air or nitrogen).
A batch or linear aqueous cleaning process
would be the preferred method of cleaning
using a deionised water solution.
Vapour Phase Reflow Soldering
Vapour phase soldering is a still upcoming
soldering practice; therefore there are no
standard temperature profiles available.
Principally, the Lead-free Soldering Profile
recommended by RECOM can be used for
vapour phase soldering. RECOM has tested
large quantities of 8-pin and 10-pin SMD
converters and recommends as an absolute
maximum condition 240°C for 90s dwell
time. In standard applications with small
sized components on a pcb, 230°C and
shorter dwell times will still deliver good
results. After discussions with various contract manufacturers, we recommended that
the temperature gradients used during preheat and cooling phases are between 0.5
K/s up to 3 K/s.
Other form factors than 8-pin or 10-pin
SMD-packages have not been tested under
vapour phase conditions. Please contact
RECOM in this case.
Custom DC-DC Converters
In addition to the standard ranges shown in
this data book, Recom have the capability to
produce custom DC-DC converters designed to
your specific requirements. In general, the parts
July-2006
can be rapidly designed using computer based CAD tools to meet any input or output
voltage requirements within the ranges of
Recom standard products (i.e. up to 48V at
either input or output). Prototype samples
can also be produced in short timescales.
Custom parts can be designed to your specification, or where the part fits within a
standard series, the generic series specification can be used. All custom parts receive the same stringent testing, inspection
and quality procedures, as standard products. However there is a minimum order
quantity as this additional documentations
and administrative tasks must be covered in
terms of costs. A general figure for this MOQ
can be around 3000pcs of low wattage converters (0,25pcs ~ 2W), 1000pcs medium
sized wattage (2W~15W) and 500pcs for
higher wattages (> 20W).Recom custom
parts are used in many applications, which
are very specific to the individual customer,
however, some typical examples are:
● ECL Logic driver
● Multiple cell battery configurations
● Telecommunications line equipment
● Marine apparatus
● Automotive electronics
● LCD display power circuitry
● Board level instrumentation systems
To discuss your custom DC-DC converter
requirements, please contact Recom technical support desk or your local distributor.
www.recom-international.com
Block diagrams
Unregulated Single Output
RM, RL, RQS, RO, RE, ROM, RSS,
RB-xxxxS, RA-xxxxS, RBM-xxxxS,
RK, RP-xxxxS, RxxPxxS,
RxxP2xxS, RN,RTS, RI, REZ, RKZxxxxS, RV-xxxxS, RAA-xxxxS, RGZ
+Vin
+Vout
Oscillator
-Vout
-Vin
Unregulated Dual Output
RQD, RSD, RB-xxxxD, RA-xxxxD,
RBM-xxxxD, RH, RP-xxxxD,
RxxPxxD, RxxP2xxD, RTD, RCxxxxD, RD-xxxxD, RKZ-xxxxD, RVxxxxD, RAA-xxxxD, RJZ
+Vin
+Vout
Oscillator
Com
-Vout
-Vin
Unregulated Dual Isolated Output
RU, RUZ
+Vin
+Vout1
-Vout1
Oscillator
+Vout2
-Vout2
-Vin
Post-Regulated Single Output
RZ, RSZ (P), RY-xxxxS, RX-xxxxS, RY-SCP, REC1.5-xxxxSR/H1, REC1.8xxxxSR/H1, REC2.2-xxxxSR/H1, REC3-xxxxSR/H1
+Vin
Reg
+Vout
Oscillator
-Vout
-Vin
Post-Regulated Dual Output
RY-xxxxS, RX-xxxxS, RY-DCP, REC2.2-xxxxDR/H1, REC3-xxxxDR/H1
+Vin
Reg
Oscillator
Com
Reg
-Vin
www.recom-international.com
+Vout
July-2006
-Vout
319
Block diagrams
Regulated Single Output
RSO, RS, REC2.2-xxxxSRW, RW-xxxxS, REC3-xxxxSRW(Z)/H*, REC5-xxxxSRW(Z)/H*, REC7.5-xxxxSRW/AM/H*, REC10-xxxxSRW(Z)/H, REC15xxxxSRW(Z)/H, REC20-xxxxSRWB(Z)/H, REC30-xx( 12,15, 24V )SRWZ/H, REC40-xx( 12,15, 24V )SRW/H, REC40-xx( 12,15, 24V )SRWB/H
+Vin
Noise
Filter
+Vout
-Vout
-Vin
Oscillator &
Controller
Reference
& Error AMP
Isolation
Regulated Dual Output
RSO-xxxxD, RS-xxxxD, REC2.2-xxxxDRW, RW-xxxxD, REC3-xxxxDRW(Z)/H*, REC5-xxxxDRW(Z)/H*, REC7.5-xxxxDRW/AM/H*,
REC10-xxxxDRW(Z)/H, REC15-xxxxDRW(Z)/H, REC20-xxxxDRWB(Z)/H, REC30-xxxxDRWZ/H, REC40-xxxxDRWB/H
+Vin
Noise
Filter
+Vout
Com
-Vout
-Vin
Oscillator &
Controller
Reference
& Error AMP
Isolation
Regulated Dual Isolated Output
REC3-DRWI
Reg
+Vin
+Vout2
Noise
Filter
-Vout2
+Vout1
-Vout1
-Vin
Oscillator &
Controller
320
Isolation
July-2006
Reference
& Error AMP
www.recom-international.com
Block diagrams
Regulated Single Output
REC20-xxxxSRW/H,REC30-xx( 1.8,2.5, 3.3, 5V )SRWZ/H, REC40-xx( 1.8,2.5, 3.3, 5V )SRW/H, REC40-xx( 1.8,2.5, 3.3, 5V )SRWB/H
+Vin
+Vout
Switch
Control
Com
-Vin
PWM
Controller
Isolation
Reference
& Error AMP
Trim
ON/OFF
Control
www.recom-international.com
July-2006
321
Common Mode Chokes for EMC
Recom offers a range of Common Mode Chokes useful for EMI Filtering to meet the requirements of EN-55022, Class B.
The component values given are suggested values and may need to be optimised to suit the application. The effectiveness of
any filter network is heavily dependent on using quality capacitors, the layout of the board and having a low impedance path to
ground. See section on filtering elsewhere in the Application Notes for more details.
EMC Filter Suggestion
C4
Input
+
+
C1
Output
C2
CMC
Component Values
C3
REC3~REC7.5
RP08 Vin = 12/24VDC nom., C1=4.7µF/50V MLCC, C2=100µF/50V Electrolytic, C3,C4=1nF/2kV MLCC, CMC-01
Vin = 48VDC nom., C1=2.2µF/100V MLCC, C2=27µF/100V Electrolytic, C3,C4=1nF/2kV MLCC, CMC-02
REC10~REC20
RP10~RP20
Vin = 12/24VDC nom., C1=4.7µF/50V MLCC, C2=100µF/50V Electrolytic, C3,C4=1nF/2kV MLCC, CMC-03
Vin = 48VDC nom., C1=2.2µF/100V MLCC, C2=27µF/100V Electrolytic, C3,C4=1nF/2kV MLCC, CMC-04
CMC-01/ CMC-02
4
9.5 ± 0.1
CMC-03/ CMC-04
4
3
9.5 ± 0.1
7.62 ± 0.2
3
15.0 max.
13.0 ± 0.3
10.16 ± 0.3
7.62 ± 0.3
j 0.8 ± 0.1
2
1
13.0 ± 0.3
2
1
j 0.6 ± 0.1
10.16 ± 0.3
5.4 max.
2
1
12.95 max.
4.0 min.
10.16 ± 0.3
Bottom View
7.62 ± 0.3
7.5 ± 0.2
4
4.5 ± 0.3
3
Stand-off x4
5.08 ± 0.3
10.16 ± 0.3
3
4
NC
NC
NC
NC
2.54
1
2.54
Component
CMC-1
CMC-2
322
Inductance
620µHx2
930µHx2
Rating
1.7A
1.1A
Component
CMC-3
CMC-4
July-2006
2
Top View
Inductance
1300µHx2
3000µHx2
Rating
4.7A
1.7A
www.recom-international.com
Powerline – Definitions and Testing
General Test Set-Up
DC Power
Source
A
+V
A
DC/DC
Converter
under Test
V
Adjustable
load
V ( VDC or VRMS )
-V
Figure 1-3: General DC/DC converter test set-up
Input Voltage Range
PI Filter
Note: If the converter is under test with
remote sense pins, connect these pins
to their respective output pins. All tests
are made in "Local sensing" mode.
The minimum and maximum input voltage limits within which a converter
will operate to specifications.
An input filter, consisting of two capacitors, is connected in paralell with a
series inductor to reduce input reflected ripple current.
L
Input
C1
C2
Output
Figure 2: PI Filter
Output Voltage Accuracy
Voltage Balance
Line Regulations
www.recom-international.com
With nominal input voltage and rated
output load from the test set-up, the
DC output voltage is measured with an
accurate, calibrated DC voltmeter.
Output voltage accuracy is the difference between the measured output
voltage and specified nominal value as
a percentage. Output accuracy (as a %)
is then derived by the formula:
Vnom ist the nominal, output specified in the converter data sheet.
For a multiple output power converter,
the percentage difference in the volta-
ge level of two outputs with opposite
polarrities and equal nominal values.
Make and record the following measurements with rated output load at +25°C:
● Output voltage at nominal line
(input) voltage.
Vout N
● Output voltage at high line (input)
voltage.
Vout H
● Output voltage at low line (input)
voltage.
Vout L
The line regulation is Vout M (the maximum of the two deviations of output)
for the value at nominal input in percentage.
July-2006
Vout – Vnom
Vnom N
Vout M – Vout N
Vout N
X100
X100
323
Powerline – Definitions and Testing
Load Regulation
Efficiency
Switching Frequency
Output Ripple and Noise
Make and record the following measurements with rated output load at +25°C:
● Output voltage with rated load
connected to the output. (Vout FL)
● Output voltage with no load or the
minimum specified load for the
DC-DC converter. (Vout ML)
Load regulation is the difference between the two measured output voltages as a percentage of output voltage
at rated load.
The ratio of output load power consumption to input power consumption
expressed as a percentage. Normally
measured at full rated output power
and nominal line conditions.
Vout ML – Vout FL
Vout FL
X100
The rate at which the DC voltage is
switched in a DC-DC converter or
switching power supply.
Because of the high frequency content
of the ripple, special measurement
techniques must be employed so that
correct measurements are obtained. A
20MHz bandwidth oscilloscope is used,
so that all significant harmonics of the
ripple spike are included.
This noise pickup is eliminated as shown
in Figure 3, by using a scope probe
with an external connection ground or
ring and pressing this directly against
the output common terminal of the
power converter, while the tip contacts
the voltage output terminal. This provides the shortest possible connection
across the output terminals.
Output
+
-
Ground Ring
to Scope
Figure 3:
324
July-2006
www.recom-international.com
Powerline – Definitions and Testing
Output Ripple and Noise (continued)
Figure 4 shows a complex ripple voltage
waveform that may be present on the
output of a switching power supply.
There are three components in the
waveform, first is a charging component that originates from the output
rectifier and filter, then there is the
discharging component due to the load
discharging the output capacitor between cycles, and finally there are
small high frequency switching spikes
imposed on the low frequency ripple.
Transient Recovery Time
Peak-Peak
Amplitude
Time
Figure 4: Amplitude
The time required for the power supply
output voltage to return to within a specified percentage of rated value, following a step change in load current.
Transient
Recovery Time
Overshoot
Output
Voltage
5V + U
5V
Undershoot
5V - L
V out
U: upper limit
L: lower limit
I out
Load
Time
Figure: 5 Transient Recovery Time
Current Limiting
Fold Back Current Limiting
output current is limited to prevent
damage of the converter at overload
situations.
A method of protecting a power supply
from damage in an overload condition,
reducing the output current as the load
approaches short circuit.
at short circuited outputs the output
voltage is regulated down so the current on outputs cannot be excessive.
V out
Rated Io
I out
Figure 6: Fold Back Current LimitingTime
www.recom-international.com
July-2006
325
Powerline – Definitions and Testing
Isolation
Break-Down Voltage
The electrical separation between the
input and output of a converter, (consisting of resistive and capacitive isola-
The maximum continuous DC voltage,
which may be applied between the
input and output terminal of a power
supply without causing damage.
Typical break-down voltage for DC-DC
converters is 500VDC minimum.
tion) normally determined by transformer characteristics and circuit spacing.
R
Resistive and
Capacitive Isolation
C
Input
Rectifier
and
Regulator
Output
Breakdown Voltage
Figure 7:
Temperature Coefficient
Ambient Temperature
Operating Temperature Range
Storage Temperature Range
326
With the power converter in a temperature test chamber with rated output
load, make the following measurements:
● Output voltage at +25°C ambient
temperature.
● Set the chamber for maximum
operating ambient temperature
and allow the power converter to
stabilize for 15 to 30 minutes.
Measure the output voltage.
● Set the chamber to minimum
operating ambient temperature and
allow the power converter to stabilize for 15 to 30 minutes.
● Divide each percentage voltage
deviation from the +25°C ambient
value by the corresponding temperature change from +25°C
ambient.
The temperature coefficient is the higher one of the two values calculated
above, expressed as percent per
change centigrade.
The temperature of the still-air immediately surrouding an operating
power supply.
The range of ambient or case temperature within a power supply at
which it operates safely and meets
its specifications.
The range of ambient temperatures
within a power supply at non-ope-
rating condition, with no degradation in its subsequent operation.
July-2006
www.recom-international.com
Powerline – Definitions and Testing
Some converters from our Powerline
offer the feature of trimming the output
voltage in a certain range around the
nominal value by using external trim
resistors.
Because different series use different
circuits for trimming no general equation can be given for calculating the
Output Voltage Trimming:
trim-resistors. Following trim-tables
give values for chosing these trimresistors. If voltages between the given
trim-points are required a linear approximation of the next points is possible
or using trimmable resitors may be
considered.
RP20-, RP30- XX1.8S
Trim up
Vout =
RU =
1
1,818
11,88
2
1,836
5,26
3
1,854
3,09
4
1,872
2,00
5
1,89
1,35
6
1,908
0,92
7
1,926
0,61
8
1,944
0,38
9
1,962
0,20
10
1,98
0,06
%
Volts
KOhms
Trim down
Vout =
RD =
1
1,782
14,38
2
1,764
6,50
3
1,746
3,84
4
1,728
2,51
5
1,71
1,71
6
1,692
1,17
7
1,674
0,79
8
1,656
0,50
9
1,638
0,27
10
1,62
0,10
%
Volts
KOhms
RP20-, RP30- XX2.5S
Trim up
Vout =
RU =
1
2,525
36,65
2
2,55
16,57
3
2,575
9,83
4
2,6
6,45
5
2,625
4,42
6
2,65
3,06
7
2,675
2,09
8
2,7
1,37
9
2,725
0,80
10
2,75
0,35
%
Volts
KOhms
Trim down
Vout =
RD =
1
2,475
50,20
2
2,45
22,62
3
2,425
13,49
4
2,4
8,94
5
2,375
6,21
6
2,35
4,39
7
2,325
3,09
8
2,3
2,12
9
2,275
1,36
10
2,25
0,76
%
Volts
KOhms
RP15-, RP20-, RP30-, RP40- xx3.3S
RP40-, xx3.305T (Trim for +3.3V)
Trim up
Vout =
RU =
1
3,333
57,96
2
3,366
26,17
3
3,399
15,58
4
3,432
10,28
5
3,465
7,11
6
3,498
4,99
7
3,531
3,48
8
3,564
2,34
9
3,597
1,46
10
3,63
0,75
%
Volts
KOhms
Trim down
Vout =
RD =
1
3,267
69,43
2
3,234
31,23
3
3,201
18,49
4
3,168
12,12
5
3,135
8,29
6
3,102
5,74
7
3,069
3,92
8
3,036
2,56
9
3,003
1,50
10
2,97
0,65
%
Volts
KOhms
RP15-, RP20-, RP30-, RP40(Trim for +5V)
Trim up
Vout =
RU =
1
5,05
43,22
2
5,1
18,13
3
5,15
10,60
4
5,2
6,97
5
5,25
4,83
6
5,3
3,42
7
5,35
2,43
8
5,4
1,68
9
5,45
1,11
10
5,5
0,65
%
Volts
KOhms
Trim down
Vout =
RD =
1
4,95
39,42
2
4,9
19,00
3
4,85
11,58
4
4,8
7,74
5
4,75
5,40
6
4,7
3,82
7
4,65
2,68
8
4,6
1,82
9
4,55
1,15
10
4,5
0,61
%
Volts
KOhms
www.recom-international.com
July-2006
327
Powerline – Definitions and Testing
RP15-, RP20- xx05D
Trim up
Vout =
RU =
1
10,1
90,50
2
10,2
40,65
3
10,3
24,06
4
10,4
15,76
5
10,5
10,79
6
10,6
7,47
7
10,7
5,10
8
10,8
3,33
9
10,9
1,95
10
11
0,84
%
Volts
KOhms
Trim down
Vout =
RD =
1
9,9
109,06
2
9,8
48,94
3
9,7
28,87
4
9,6
18,83
5
9,5
12,81
6
9,4
8,79
7
9,3
5,92
8
9,2
3,77
9
9,1
2,10
10
9
0,76
%
Volts
KOhms
RP15-, RP20-, RP30-, RP40Trim up
Vout =
RU =
1
2
12,12
12,24
1019,45 257,41
3
12,36
134,39
4
12,48
84,06
5
12,6
56,68
6
12,72
39,47
7
12,84
27,65
8
12,96
19,03
9
13,08
12,47
10
13,2
7,30
%
Volts
KOhms
Trim down
Vout =
RD =
1
11,88
270,20
2
11,76
149,63
3
11,64
95,76
4
11,52
65,24
5
11,4
45,59
6
11,28
31,88
7
11,16
21,77
8
11,04
14,01
9
10,92
7,86
10
10,8
2,87
%
Volts
KOhms
RP15-, RP20, RP30Trim up
Vout =
RU =
1
24,24
210,51
2
24,48
96,13
3
24,72
57,18
4
24,96
37,54
5
25,2
25,71
6
25,44
17,80
7
25,68
12,14
8
25,92
7,89
9
26,16
4,58
10
26,4
1,93
%
Volts
KOhms
Trim down
Vout =
RD =
1
23,76
283,54
2
23,52
125,47
3
23,28
73,95
4
23,04
48,40
5
22,8
33,14
6
22,56
22,99
7
22,32
15,76
8
22,08
10,34
9
21,84
6,13
10
21,6
2,76
%
Volts
KOhms
RP15-, RP20-, RP30-, RP40Trim up
Vout =
RU =
1
15,15
455,67
2
15,3
192,89
3
15,45
111,48
4
15,6
71,85
5
15,75
48,40
6
15,9
32,90
7
16,05
21,90
8
16,2
13,68
9
16,35
7,31
10
16,5
2,23
%
Volts
KOhms
Trim down
Vout =
RD =
1
14,85
449,01
2
14,7
210,22
3
14,55
125,38
4
14,4
81,89
5
14,25
55,46
6
14,1
37,68
7
13,95
24,92
8
13,8
15,30
9
13,65
7,80
10
13,5
1,78
%
Volts
KOhms
RP15-, RP20-, RP30Trim up
Vout =
RU =
1
30,3
306,24
2
30,6
129,65
3
30,9
75,39
4
31,2
49,05
5
31,5
33,49
6
31,8
23,21
7
32,1
15,92
8
32,4
10,48
9
32,7
6,26
10
33
2,90
%
Volts
KOhms
Trim down
Vout =
RD =
1
29,7
300,42
2
29,4
142,30
3
29,1
85,77
4
28,8
56,73
5
28,5
39,05
6
28,2
27,16
7
27,9
18,60
8
27,6
12,16
9
27,3
7,13
10
27
3,10
%
Volts
KOhms
328
July-2006
www.recom-international.com
Powerline - Heat Sinks
7G-0020A (9.5°C/W)
A : A ( 5 : 1mm)
3.2 ±0.1
49.80 ±0.2
1.30
R 0.65
24.20±0.2
12.00 ±0.2
A :A
R2
1.30
1.40
1.2 ±0.1
1.30
1.40
2.00
12.00 ±0.2
5.60 ±0.1
1.70 ±0.1
7G-0026A (7.8°C/W)
3.2 ±0.1
49.80 ±0.2
A : A ( 5 : 1mm)
1.30
49.80 ±0.2
12.00 ±0.2
1.30
1.40
A :A
1.30
1.2 ±0.1
12.00 ±0.2
1.40
1.30
R 0.65
5.60 ±0.1
1.70 ±0.1
www.recom-international.com
July-2006
329
Powerline - Heat Sinks
7G-0011A (8.24°C/W)
A : A ( 5 : 1mm)
50.00 ±0.2
R 0.65
37.40±0.2
15.00 ±0.2
1.30
A :A
1.40
1.30
3.00 ±0.1
1.00
2.00
27.00 ±0.2
5.60 ±0.1
1.70 ±0.1
7G-0022A (INNOLINE)
57.91 ±0.25
8.41
60.96±0.25
1.42
R 0.58
50.80±0.25
R 1.07
3.56
4 -Æ 3.50
6.10 ±0.25
48.26 ±0.25
330
July-2006
2.29 ±0.25
www.recom-international.com
Tubes
No.
Types
1.
RO, RM, RE, ROM, RB, RBM, RK, RH, RP, RU, RI, RD, REZ, RKZ, RUZ, RY,
RxxTR, R-78xx
RS, RSO,
RL, RN, RF, RA, RC, RX
RSS, RSD, RQS, RQD, RZ
RTD, RTS, RSZ, R-78Axx SMD
RV, RW, RxxPxx, RxxP2xx
R5, R6, R7, REC1.5-, REC1.8-, REC3-, REC5-, REC7.5RAA
RP08, RP12
RP08-SMD, REC2.2-SMD, REC3-SMD, REC5-SMD, REC7.5-SMD
REC10, REC15, REC20, REC30, REC40
RP10, RP15, RP20, RP30, RP40
RP40-E
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
2.
1.
9.0 ± 0.5
0.5 ± 0.2
15.5 ± 0.5
12.0 ± 0.5
17.0 ± 0.25
4.9 ± 0.5
12.0 ± 0.25
6.5 ± 0.25
TUBE LENGTH = 520mm ± 1.5
TUBE LENGTH = 520mm ± 1.0
www.recom-international.com
10.0 ± 0.25
0.6 ± 0.15
July-2006
331
Tubes
3.
0.5 ± 0.2
4.
14.5 ± 0.5
0.55 ± 0.2
12.0 ± 0.4
7.7 ± 0.4
10.5 ± 0.5
13.5 ± 0.4
8.3 ± 0.4
15.5 ± 0.5
4.3 ± 0.4
17.0 ± 0.4
3.3 ± 0.5
TUBE LENGTH = 530mm ± 2.0
TUBE LENGTH = 520mm ± 1.0
5.
0.6 ± 0.15
0.55 ± 0.2
6.
11.0 ± 0.4
16.15 ± 0.35
12.35 ± 0.35
9.4 ± 0.4
19.2 ± 0.35
12.6 ± 0.4
9.12 ± 0.4
11.6 ± 0.35
5.3 ± 0.4
7.1 ± 0.35
17.0 ± 0.4
21.0 ± 0.35
TUBE LENGTH = 530mm ± 2.0
7.
0.55 ± 0.2
TUBE LENGTH = 520mm ± 2.0
8.
22.7 ± 0.35
27.40±0.2
0.95±0.1
24.35±0.25
11.3 ± 0.35
18.3 ± 0.35
11.00±0.25
16.30±0.2
26.50±0.25
8.50±0.5
26.50±0.25
8.00±0.25
7.85 ± 0.35
31.40±0.25
TUBE LENGTH = 520mm ± 2.0
9.
0.8 ± 0.2
TUBE LENGTH = 520mm ± 2.0
10.
22.7 ± 0.35
0.55 ± 0.2
13.8 ± 0.35
18.3 ± 0.35
22.0 ± 0.5
15.45 ± 0.5
3.5 ± 0.5
13.5 ± 0.5
8.85 ± 0.35
31.50 ± 0.5
TUBE LENGTH = 538mm ± 2.0
TUBE LENGTH = 252mm ± 2.0
332
July-2006
www.recom-international.com
Tubes
11.
54.0 ± 0.5
50.0 ± 0.5
22.0 ± 0.5
20.0 ± 0.5
7.0 ± 0.5
1.2 ± 0.2
6.0 ± 0.5
10.0 ± 0.5
15.0 ± 0.5
TUBE LENGTH = 292mm ± 2.0
12.
54.0 ± 0.5
50.0 ± 0.5
22.0 ± 0.5
20.0 ± 0.5
7.0 ± 0.5
1.2 ± 0.2
6.0 ± 0.5
10.0 ± 0.5
15.0 ± 0.5
TUBE LENGTH = 254mm ± 2.0
13.
80.0 ± 0.5
1.2 ± 0.2
0.5 ± 0.5
22.0 ± 0.5
9.0 ± 0.5
21.0 ± 0.5
www.recom-international.com
TUBE LENGTH = 256mm ± 5.0
July-2006
333
Tapes
RSS-xxxx & RQS-xxxx tape outline dimensions
13.2
Spocket hole Ø1.50+0.1/-0
Spocket hole tolerance over any 10 pitches ±0.2
0.40 ±0.05
16.00
2.00
4.00
11.4
1.75
7.6
11.5
24.0 ±0.2
RECOM
RSS-0505
xxxx
All dimensions in mm xx.xx ±0.1
1. 10 sprocket hole pitch cumulative tolerance ±0.20
2. All dimensions meet EIA-481-2 requirements
3. Component load per 13" reel : 500 pcs
RECOM
RSS-0505
xxxx
4. The diameter of disc center hole is 13.0mm
334
RECOM
RSS-0505
xxxx
July-2006
www.recom-international.com
Tapes
RSD-xxxx, RQD-xxxx & RZ-xxxx tape outline dimensions
17.75
Spocket hole Ø1.50+0.1/-0
Spocket hole tolerance over any 10 pitches ±0.2
0.35 ±0.05
16.00
2.00
4.00
11.4
1.75
7.6
11.5
24.0 ±0.2
RECOM
RSD-0505
xxxx
All dimensions in mm xx.xx ±0.1
1. 10 sprocket hole pitch cumulative tolerance ±0.20
2. All dimensions meet EIA-481-2 requirements
3. Component load per 13" reel : 500 pcs
RECOM
RSD-0505
xxxx
4. The diameter of disc center hole is 13.0mm
www.recom-international.com
RECOM
RSD-0505
xxxx
July-2006
335
Tapes
RSZ-xxxx, RTS-xxxx, RTD-xxxx & R-78Axx-xxSMD tape outline dimensions
15.5
Spocket hole Ø1.50+0.1/-0
Spocket hole tolerance over any 10 pitches ±0.2
0.5 ±0.05
20.00
2.00
4.00
12.5
1.75
9.9
11.5
24.0 ±0.3
RECOM
RSZ-0505
xxxx
All dimensions in mm xx.xx ±0.1
1. 10 sprocket hole pitch cumulative tolerance ±0.20
2. All dimensions meet EIA-481-2 requirements
3. Component load per 13" reel : 500 pcs
RECOM
RSZ-0505
xxxx
4. The diameter of disc center hole is 13.0mm
336
RECOM
RSZ-0505
xxxx
July-2006
www.recom-international.com
Notes
....................................................................................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................
www.recom-international.com
July-2006
337
INTERNATIONAL CONTACT
RECOM Headquarter
RECOM Production
RECOM Companies
Distributors
Asia Pacific Region
(China, Australia, Hong Kong, India,
Japan, Korea, Singapore, Malaysia,
Thailand, Taiwan, Phillippines,
Vietnam)
RECOM Asia Pte. Ltd.
Sebastian Tan, Blk 1003, Bukit Merah Central,
Technopreneur Centre, #04-28, Singapore 159836
Tel.: (+65) 62768795, Fax: (+65) 62731477
[email protected], www.recom-asia.com
Belarus
Conektro UE
F. Skoriny ave. 95, build.7, 220043 Minsk
Tel.: +375 17 287 30 60, Fax: +375 17 287 35 91
[email protected]
Croatia
Alma Electronic
Samacka 27, 1000 Zagreb
Tel.: 1-36 66 793, Fax: 1-36 66 725
E-mail: [email protected]
www.almaelectronic.com
J.S. Electronic
Jablanska 36, 10000 Zagreb, Tel./Fax: +386 1 3861930
E-mail: [email protected]
Bulgaria
Electroninvest
162 Knyaz Boris I str., 1000 Sofia
Tel.: +359 2 9831551
[email protected], www.electroninvest.com Czech Republic
Australia
China/Hong Kong
Swisstool
Na Jarove 2425/4, 130 00 Praha 3
Cutter Electronics
EIL (China) Co., Ltd. (Shanghai)
Tel.: 284 860 063-4, Fax: 284 860 028
3 Rossiter Court, Rowville, Victoria 3156, Australia Tong Wong, Rm F, 13/F, Huijia Buliding,
E-mail: [email protected]
Tel.: +61 3 9753 9911, Fax: +61 3 9753 9455 No.41 North Caoxi Road, Xuhui District,
Cellphone: 0417 540 359
Shanghai, China.
[email protected], www.cutter.com.au Tel.: 86-21-64686607, Fax: 86-21-64286594 Denmark
M-Comp A/S
RS Components Pty Ltd
EIL (China) Co., Ltd. (Shenzhen)
25 Pavesi Street, Smithfield, Sydney
Leo Jiang, Rm1805, Block C, World Trade Centre, Carsten Schlüntz, Korskildeeng 6, 2670 Greve,
Tel.: +45 9669 5000, Fax: +45 9669 5001,
New South Wales 2164
Fu Hong Rd., Futain District, Shenzhen, China.
Tel.: +61 2 9681 8588, Fax: +61 2 9681 8599 Tel.: 86-0755-83002789, Fax: 86-0755-83002727 Mobil: +45 3067 3333
E-mail: [email protected], www.m-comp.dk
E-mail: [email protected]
EIL (HK) Co., Ltd.
www.rsaustralia.com
RS Components A/S
Edwin Chan, Unit A, 9/F., VGA Building,
532 Castle Peak Road, Kowloon, Hong Kong Vibevej 11, Teknisk hotline: 38 16 98 98
*Austria/Eastern & South Eastern
Tel.: (+852) 2741 6811, Fax: (+852) 2370 9297 DK-2400 København NV, Tel.: 38 16 99 00
Europe (Russia & Ukraine)
E-mail: [email protected], www.eilhk.com E-mail: [email protected]
recomatic electronics Austria
Rutronik
RS Components Ltd.
Handelsgesellschaft m.b.H
Elektronische Bauelemente GmbH
Suite
23A-C,
East
Ocean
Business
Centre
Phase
2,
Mauerbachstraße 24, A-1140 Wien
Farum Gydevej 63, DK-3520 Farum
No.618
Yan’an
Eastern
Road,
Shanghai,
Tel.: +43-(0)1 979 25 06-0
Tel.: +45 70 20 19 63, Fax: +45 70 20 19 73
China 200001
Fax: +43-(0)1 979 25 06-38
Tel.: +86 021 5385 4238, Fax: +86 021 6427 7692 www.rutronik.com
[email protected], www.recomatic.at
[email protected], www.rsprc.com Estonia
www.recom-international.com
Shanghai Micropower Tech Co. Ltd.
TEVALO AS
Austria
Jimmy Yu, Rm. 308-310, 20 Xuhong Rd,
Paldiski mnt.15, Tallinn
Shanghai, 200233, China
RS Components Handelsges. mbH
Tel.: +372 6605327, Fax: +372 6605326
Tel.: (+86) 21 64276055, Fax: (+86) 21 64274673 E-mail: [email protected], www.tevalo.ee
Postfach 79, Albrechtser Strasse 11
[email protected]
A-3950 Gmuend
Finland
www.micropower.cn
Tel.: +43 2852 505, Fax: +43 2852 53223
[email protected], www.rs-components.at RS Components Ltd
Cool Power Solutions Oy
13/F, Wyler Centre, 2-Unit I, 200 Tai Lin Pai Road, Alaniityntie 8, FIN-01900 Nurmijärvi
Belgium
Tel.: +358 (0)9-2906 1990
Kwai Chung, N.T., Hong Kong
Rutronik
Tel.: +852 2610 2990, Fax: +852 2610 2991 Fax: +358 (0)9-2906 1991
Elektronische Bauelemente GmbH
E-mail: [email protected]
E-mail: [email protected]
Place-Rooseveltplein, 1/B11
www.recom-international.com
www.rshongkong.com
9600 Ronse-Renaix
www.coolpowersolutions.fi
Tel.: +32 (0) 55 20 74 63, Fax: +32 (0) 55 20 98 05
www.rutronik.com
Finland continuation
YE International
Luomannotko 6, 02200 ESPOO
FINLAND, Telephone: 09-4526 21,
Fax: 09-4526 2249, E-mail: [email protected]
France
ISC-Distrel S.A.
1, Av. du Pdt Georges Pompidou - B.P. 50801
F-92508 Rueil Malmaison
Tel.: +33-(0)1 41 39 25 00
Fax: +33-(0)1 47 32 99 25
[email protected], www.isc-distrel.com
Radiospares
BP 453, 60031 Beauvais Cedex
Tel.: +33 3 44 10 15 00, Fax: +33 3 44 10 15 07
[email protected]
www.radiospares.fr
Rutronik S.A.
Tel.: +33-(0)1-30083401, Fax: +33-(0)1-30083410
Portable: 0685939487
E-mail: [email protected]
www.rutronik.com
Germany
CONRAD Electronic GmbH
Klaus-Conrad-Straße 2,
D-92530 Wernberg-Köblitz
Tel.: +49-(0)9604-408 988
Fax: +49-(0)9604-408 936
E-mail: [email protected]
www.business.conrad.de
Recom International Power GmbH
Waldstraße 23 D, D-63128 Dietzenbach
Tel.: +49-(0)6074-8298-0, Fax: +49-(0)6074-8298-15
E-mail: [email protected]
www.recom-international.com
RS Components GmbH
Hessering 13b, D-64546 Mörfelden-Walldorf
Tel.: +49-6105 401234, Fax: +49-6105 401100
E-mail: [email protected]
www.rs-components.de,
www.rs-online.de
Rutronik GmbH
Industriestraße 2, D-75228 Ispringen
Tel.: +49-(0)7231-801-506
+49-(0)7231-801-507
E-mail: [email protected]
www.rutronik.com
Great Britain
Dengrove Marketing Limited
The Stables, Grange Mill Farm
Old Linslade Road, Heath and Reach
Beds LU7 0DY
Tel.: +44 (0)1525 237731, Fax: +44 (0)1525 237727
E-mail: [email protected],
www.dengrove.com
www.recom-international.com
Rapid Electronics Limited
Severalls Lane, Colchester, Essex C04 5JS
Tel.: +44-(0)1206 751166
Fax: +44-(0)1206 751188
[email protected], www.rapidelectronics.co.uk
www.recom-international.com
RS Components Ltd UK and Global Sales
PO Box 99, Corby, Northamptonshire
NN17 9RS, United Kingdom
Tel.: (44) (0) 1536 201234, Fax: (44) (0) 1536 405678
E-mail: [email protected]
www.rswww.com
Korea
Databook Co.
James Kim, 301 Jeshin Bldg. 43-22 Shinkey,
Yongsan, Seoul, Korea
Tel.: (+82)-2-707-3882, Fax: (+82)-2-707-3884
[email protected], www.databook.co.kr
Hong Kong
EIL(HK) Co Ltd
Unit A, 17/F,Mai Wah Ind. Bldg,
1-7 Wah Sing St, Kwai Chung, Hong Kong
Tel.: (+852) 2741 6811, Fax: (+852) 2370 9297
E-mail: [email protected],www.eilhk.com
Malaysia
RS Components Sdn Bhd (387407-M)
Lot 12, Jalan Pensyarah U1/28, Seksyen U1
Hicom Glenmarie Industrial Park
40150 Shah Alam, Selangor Darul Ehsan
Tel.: +603 5032 9900, Fax: +603 5032 2033
E-mail: [email protected]
www.rsmalaysia.com
Hungary
Robtron Elektronik Trade
Deryne u. 24, 6726 Szeged
Tel.: +36 62 554 600, Fax: +36 62 554 610
E-mail: [email protected]
India
Omniscient Electronics
No. 507, 9th Main, Banashankari II nd Stage,
560 070 Bangalore
Tel.: +91-80-26718144, 26718162
Fax: +91-80-26718151
[email protected]
www.omniscientelectronics.net
Electronic Enterprises (India) PVT. LTD.
G. S. Kolarkar, UNIT 216, Regal Industrial Estate,
Acarya Donde Marg, Sewree 400 015.
Tel.: +91-22-24147970, +91-22-24137096
Fax: +91-22-24133341
[email protected], www.eeipl.com
RS Components & Controls (India) Ltd
44,Okhla Industrial Estate
New Delhi -110020, India
Tel.: +91 (011) 26326991
Fax: +91 (011) 26326993
E-mail: [email protected]
www.rsindia.com
Italy
Larcet S.p.a.
Via Luigi Biolchini, 14/b, 00146 Roma
Tel.: +39 06 5580700, Fax: +39 06 5573843
[email protected], www.larcet.com
www.recom-international.com
RS Components SpA
Via De Vizzi, 93/95, I-20092 Cinisello
Balsamo, Milano, Tel.: +39-02 660 581, Fax:
+39-02 660 58051, www.rs-components.it
Rutronik Italia S.r.l.
Giuseppe Casella, Via Caldera, 21,
Centro Direzionale S. Siro,
I-20153 Milano, Tel.: +39 (0)2 409511,
Mobil: +39 3356752665, Fax: +39 (0)2 40951224
[email protected]
www.rutronik.com
Japan
Arktake, Inc.
Takanori Nayuki, 3-25-3 Takadanobaba,
Shinjuku-ku, Tokyo, 169- 0075
Tel.: 03-5330-6711, Fax: 03-5330-6710
[email protected], www.arktake.co.jp
RS Components K.K.
West Tower 12F, Yokohama Business Park
(YBP), 134 Godocho, Hodogaya, Yokohama,
Kanagawa, 240-0005
Tel.: +81 45 335 8550, Fax: +81 45 335 8554
www.rswww.co.jp
Kazakhstan
ITC Kazakhstan, Almaty
Shevchenko street 162 g, 480008 Almaty
Tel.: +7 (3272) 686-514, Fax: +7 (3272) 686-614
E-mail: [email protected]
www.itc-electronics.com
Latvia
TEVALO SIA
Lienes iela 12, Riga,
Tel.: +371 75 06730, Fax: +371 78 45784
E-mail: [email protected], www.tevalo.lv
Lithuania
ELINTA UAB
Pramones 16E, 51187 51187 Kaunas
Tel.: +370 37 351999, Fax: +370 37 452780
E-mail: [email protected], www.elinta.lt
TEVALO UAB
Kubiliaus str. 1, Vilnius,Tel.: +370 618 49648
[email protected], www.tevalo.lt
Macedonia
GAC Elektronik
Bul.Kuzman J. Pitu-28a / lokal 3, 1000 Skopje
Tel.: 00389 2 2462555
E-mail: [email protected]
Moldova
H&R
Str. Rakoczi 10/12, 535600 Odorheiu Secuiesc
Tel.: +40 (0) 266 218463
E-mail: [email protected]
Netherlands
Rutronik
Elektronische Bauelemente GmbH
Madame Curiestraat 2, 3316 GN Dordrecht
Tel.: +31 (0) 78/6 52 13 80
Fax: +31 (0) 78/6 52 13 81
www.rutronik.com
Norway
ACTE AS
Vestvollveien 10, P.O.Box 190
2021 Skedsmokorset
Tel.: +47-638 98 900, Fax: +47-638 79 000
[email protected], www.recom-international.com
www.acte.no
RS Components AS
Hvamsvingen 24, 2013 Skjetten, Norge
Telefonbestilling: +47 64 83 40 00,
Faksbestilling: +47 64 83 40 10,
[email protected]
Romania
H&R
Str. Rakoczi 10/12, 535600 Odorheiu Secuiesc
Tel.: +40 (0) 266 218463
E-mail: [email protected]
Syscom
Av. Protopopescu 10, Bl. 4, Ap. 2
Sector 1, 011728 Bucuresti
Phone/Fax: (004021) 222 9176
[email protected]
Russia
ITC Moscow
Radio str. 24, 105005 Moscow,
Tel.: (495) 775 18 45, Fax: (495) 775 18 48
E-mail: [email protected]
www.itc-electronics.com
Compel
Derbenevskaya 1 / 2, korp.1, 115114 Moscow
Tel.: +7 (095) 234-77-58, +7 (095) 234-77-59
Fax: +7 (095) 995-09-02
[email protected], www.compel.ru
Compel
41, Bolshaya Pushkarskaya str.
197101 St. Petersburg
Tel.: +7 (812) 327-94-04
Fax: +7 (812) 327-94-03
E-mail: [email protected]
ITC Ekaterinburg
Vainera str. 55/B, 620014 Ekaterinburg
Tel.: (343) 378-77-90, Fax: (343) 257-53-96
[email protected], www.itc-electronics.com
ITC Nishni Novgorod
pr. Gagarina 176A, office 219
603009 Nijniy Novgorod
Tel.: +7 8312 778 016, Fax: +7 8312 778 016
E-mail: [email protected]
www.itc-electronics.com
ITC Novosibirsk
Krasniy Prospekt 82/1, 630091 Novosibirsk
Tel.: (383) 22-77-888, Fax: (383) 22-77-887
E-mail: [email protected]
www.itc-electronics.com
ITC Rostov na Donu
Cherevichkina str. 45, 344025 Rostov-na-Donu
Tel.: +7 863 251 63 01, Fax: +7 863 251 72 77
E-mail: [email protected]
www.itc-electronics.com
ITC Saint-Petersburg
14, Nab. Obvodnogo Canala,
193019 Saint-Petersburg
Tel.: +7 812 567 73 82, Fax: +7 812 567 73 77
E-mail: [email protected]
www.itc-electronics.com
ITC Samara
Moscow highway 4, 15 office 612,
443013 Samara
Tel.: +7 (846) 929-00-28,
Fax: +7 (846) 929-00-31
E-mail: [email protected]
www.itc-electronics.com
ITC Ufa
Salavata Ulaeva pr. 59, office 332, 450078 Ufa
Tel.: +7 3472 798 115, Fax: +7 3472 798 118
E-mail: [email protected]
www.itc-electronics.com
New Zealand
RS Components Ltd
Units 30 & 31, Warehouse World,
761 Great South Road, Penrose, Auckland 1006
Tel.: +64 9 526 1600, Fax: +64 9 579 1700
E-mail: [email protected]
Serbia and Montenegro
www.rsnewzealand.com
Tagor Electronic doo
Philippines
T.Brankovica 21, 18000 18000 Nis
Tel.: +381 18 575 545, Fax: +381 18 717 125
RS Components Limited
21/F Unit B1, Multinational Bancorporation Centre E-mail: [email protected]
6805 Ayala Avenue, Makati City, Philippines. www.tagor.co.yu
Order Line: +632 888 4030
Slovak Republic
Order Fax: +632 888 4034/4035/4036
Dialogue
Technical Helpline: +632 888 4030
Krajinska cesta 1, 921 01 Piestany
Technical Fax: +632 888 4034/4035/4036
Tel./Fax: +421 33 7722030
E-mail: [email protected]
[email protected]
www.rsphilippines.com
Poland
Radiotechnika Marketing
ul.Sienkiewicza 6A, 50-335 Wroclaw
Tel.: +48 (71) 3270700, Fax: +48 (71) 3270800
[email protected]
RUTRONIK Office Gdynia
ul. Batorego 28-32, 81-366 Gdynia
Tel. +48 (0) 58 / 783 20 - 20
Fax +48 (0) 58 / 783 20 - 22
[email protected]
South Africa
Brabek (Pty) Ltd.
Unit D14A, Prime Park, Mocke Rd.
Diep River, 7800, Cape Town, South Africa
Tel.: +27 (021) 706 3162, Fax: +27 (021) 706 3083
[email protected], www.brabek.co.za
RS Components (SA)
P.O. Box 12182, Vorna Valley 1686,
1 & 2 Indianapolis Street, Kyalami Business
Park, Kyalami, Midrand, South Africa
Telephone: 0860 007 772,
Fax: (27-11) 466-1577,
[email protected]
Spain
Electronica Melgui S.L.
C/Amador Valdés, 14, 28017 Madrid
Tel.: +34 91 5 01 92 76, Fax: +34 91 5 01 59 58
[email protected], www.melgui.es
RS Amidata
Avenida de Europa, 19 – Edificio 3
28224 Pozuelo de Alarcón – Madrid
Tel.: +34 91 902 100 911
[email protected]
RUTRONIK España S.L.
C/ Marques de Sentmenat, 54-58 3°-1°
08029 Barcelona, Tel.: +34 93 444 24 12
eMail: [email protected]
http://www.rutronik.com
Slovenija
Alma Electronic
Cesta v Gorice 38, 1000 Ljubljana
Tel.: 01-256-13-81, Fax: 01-256-38-70
[email protected]
www.almaelectronic.com
Sweden
RUTRONIK Nordic AB
Kista Science Tower, 16451 Kista
Sweden, Tel. +46 8 505 54900,
Fax +46 8 505 54950,
[email protected]
Switzerland
Trenew Electronic AG
Joweid Zentrum 1, CH-8630 Rüti
Tel.: +41(0)552506600, Fax: +41(0)552506666
E-mail: [email protected], www.trenew.ch
Rutronik AG
Hölzliwisenstrasse 5
CH-8604 Volketswil
Tel.: +41 (0) 44 947 37 37
Fax: +41 (0) 44 947 37 47
[email protected]
Rutronik AG
Rue Galilée
CH-1400 Yverdon
Tel.: +41 (0) 24 423 91 40
Fax: +41 (0) 24 423 91 49
[email protected]
Taiwan
RS Components Ltd
10/F,No.3 Section 1, Ming Sheng Road,
Panchiao,Taipei, Taiwan
Tel.: +886 02 2957 9902, Fax: +886 02 2959 9844
E-mail: [email protected]
www.rstaiwan.com
Bentech Computer Corp.
7F-3, No.23, Lane 169, Kang-Ning Street
His-Chih City, Taipei Hsien,Taiwan R.O.C
Tel.: +886-2-2695-8906, Fax: +886-2-2695 -8911
E-mail: [email protected]
www.bentech-taiwan.com
Ukraine
VD MAIS
Volodymyrska St. 101, 01033 Kyiv
Tel.: (+380 44) 227 1356, Fax: (+380 44) 227 3668
[email protected]
ITC Ukraine, Kiev
pr. Vossoyedineniya 7a, office 107
02160 Kiev
Tel.: +38 044 559-68-90, Fax: +38 044 501-13-03
[email protected], www.itc-electronics.com
USA
Mega Electronics Inc.
4B Jules Lane, New Brunswick, NJ 08901
Tel.: +1-732-249-2656, Fax: +1-732-249-7442
[email protected]
www.recom-international.com
RECOM International
Power GmbH
Sales Support Service
Waldstraße 23 D
63128 Dietzenbach, Germany
Fon: + 49-6074-8298-0
Fax: + 49-6074-8298-15
[email protected]
www.recom-international.com
Analogue and discrete were yesterday!
The smallest 7,5 Watt
switching regulator available!
R-78xx-xx
R-78Axx-xxSMD
■
■
■
■
Efficiencies of up to 97%
Pin - and function compatible
with 78xx linear regulators
0.5 and 1.0A versions
No heatsink required!
Comparison:
Product of
the year 2005
R-78xx-0.5
Switching regulator
linear regulator + heatsink
NEW!
No heatsink required!
Now available as SMD-Version with
additional output trim and shutdown pins!
More details: See Innoline section, page 139
www.recom-international.com