SLX-10MG Industrial Ethernet Switch

Product Data Sheet
SlimLine Plus Gigabit Industrial Connectivity
SLX-10MG Industrial Ethernet Switch
The SLX-10MG is a 10 port industrial Ethernet switch with managed capabilities, 7 fast and 3 Gigabit ports of which two are combination
ports that support both copper and fiber optic connections. This switch is designed to be rugged, reliable, real-time and secure. It
combines compact DIN-rail packaging, protected circuitry and powerful software to keep your system going even under the toughest
Product Highlights
Industrial Switch Product Highlights
10 ports including
7 fast Ethernet 10/100 RJ45 ports
1 Gigabit Ethernet 10/100/1000 RJ45 port
2 Gigabit combo ports for copper or fiber
High port count in a small footprint
Truly rugged design with -40 to 75°C operation
Easy to configure management functions
To learn more about our SLX-10MG Industrial Ethernet Switch, simply contact [email protected] or call +1 (518) 877-5173.
Two Flexible Combination Gigabit Ports
Your choice, either connect to the RJ45 for a 10 /100 /1000 Mbps auto-detecting copper link or plug in a fiber transceiver for a 100 or 1000Mbps
noise-immune fiber link. These advanced ports give you the flexibility you need and make your job easier!
Real-Time Secure Performance
Real-Time Ring™ or Rapid Spanning Tree (RSTP) for fast redundant ring or mesh networks
SNMPv1 and v2 network management
SNMPv3 authentication and encryption for security
SNMP notifications (traps) for report on event
Priority Queuing (QoS/CoS) for real-time operation
IGMP for Multicast filtering (snooping and querying)
VLAN for convenient traffic segregation
Broadcast and multicast storm protection
RMON and port mirroring for advanced diagnostics
Security with HTTPS, SSL, SSH, SNMPv3 and more
Easy configuration via Web, Telnet or CLI
Free field-installable firmware upgrades forever
Trouble-Free Operation
-40 to 75 °C operating range
UL/CSA (CUL), CE and Hazloc (Zone 2) rated
Dual (redundant) power inputs
Industrial surge and spike protection
Self-test/alarm output contact
DIN-rail or direct-panel mounting
To learn more about our SLX-10MG Industrial Ethernet Switch, simply contact [email protected] or call +1 (518) 877-5173.
Ethernet Performance
10 Ethernet ports including 3 Gigabit
Managed, store and forward, wire-speed
All IEEE 802.3 Ethernet protocols supported
RJ45 ports 1 - 7 (shielded) 10/100BaseTX
RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX
RJ45 port speed auto-negotiation
RJ45 MDI/MDIX auto-crossover
RJ45 TD and RD auto-polarity
Ports 9 and 10 are combination gigabit ports that have both a RJ45 connector and SFP fiber connector. For each of these ports, only one of
the connectors can be used at a time.
SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers
Fiber optic port speed: 100 Mbps or 1000 Mbps
Fiber typical specs (see separate datasheet for details)
Multimode, 0.55 km, 850 nm, 50-62.5/125 µm
Singlemode, 10 km, 1310 nm, 9-10/125 µm
Long haul, up to 120+ km, 1550 nm, 9-10/125 µm
Typical latency (varies on load and settings)
@ 10 Mbps: 16 us + frame time
@ 100 Mbps: 5 us + frame time
Full or half duplex operation configurable per port
MAC addresses supported 8192
Memory bandwidth 32 Gbps
Ethernet isolation 1500 VRMS 1 minute
Console ports – USB and RS232 (RJ45)
Ethernet Compliance
IEEE 802.3z (Gigabit 1000 Mbps Ethernet connections)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3x (Full-Duplex with Flow Control)
IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability)
IEEE 802.1p (Priority Queuing – QoS, CoS, ToS / DS)
IEEE 802.1Q (VLAN for traffic segregation)
Real-Time Ring™
Link loss recovery: 30 mS plus 5 mS per hop
Switches in a ring: <50 for best performance
Multiple rings supported (configurable)
“OK” Alarm Output
Indicates power and operational status
Voltage same as switch input voltage
Maximum current output 0.5 Amp
Power Input
Redundant input terminals
Reverse polarity protection
Input power (typical with all ports active)
5 W (w/ no fiber plugged in)
7 W (w/ 2 fiber plugged in)
Power input voltage 10-30 VDC
Transient protection 15,000 watts peak
Spike protection 5,000 watts (10x for 10 uS)
Operating temperature:
-40 to 75 °C (cold startup at -40 °C)
Storage temperature -40 to 85 °C
Humidity (non-condensing) 5 to 95% RH (optional conformal coating is available)
Vibration and shock – IEC60068-2-6, and -27
Standards & Compliance
Electrical safety – UL508/CSA C22.2/14; EN61010-1, CE
EMC – FCC part 15, ICES-003; EN61000-6-2/4, CE
Hazardous locations – UL1604/CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
Maritime – designed for marine and offshore per ABS
NEMA TS-2 for traffic control systems
RoHS and WEEE compliant
ISO9001:2008 certified company
DIN-rail or direct-panel mounting
Case – Corrosion-resistant aluminum
Ingress protection – IP40
Weight – 0.34 kg (12 oz.)
Dimensions – see mechanical diagram
All specifications are subject to change. Contact Sixnet to learn more.
To learn more about our SLX-10MG Industrial Ethernet Switch, simply contact [email protected] or call +1 (518) 877-5173.
Order Guide
Part Number
10 port industrial Ethernet switch
Gigabit SFP fiber transceiver, mm, 550 m
Gigabit SFP fiber transceiver, mm, 2 km
Gigabit SFP fiber transceiver, sm, 10 km
Gigabit SFP fiber transceiver, sm, 30 km
Gigabit SFP fiber transceiver, sm, 50 km
Gigabit SFP fiber transceiver, sm, 80 km
100Mb SFP fiber transceiver, mm, 4 km
100Mb SFP fiber transceiver, sm, 30 km
100Mb SFP fiber transceiver, sm, 60 km
100Mb SFP fiber transceiver, sm, 100 km
Contact Sixnet for special or long haul transceivers up to 120 Km.
Part Number
Power supply – AC to 24VDC, 2A
Dual port Ethernet surge and lightning protector for the 10/100
ports only
Console port cable, DB9 to RJ45
Interested in more accessories? Visit our Industrial Ethernet accessories page to learn more.
To learn more about our SLX-10MG Industrial Ethernet Switch, simply contact [email protected] or call +1 (518) 877-5173.